2 * Copyright (c) 2009-2010 Intel Corporation
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, write to the Free Software Foundation, Inc.,
15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17 * The full GNU General Public License is included in this distribution in
18 * the file called "COPYING".
21 * Jesse Barnes <jbarnes@virtuousgeek.org>
25 * Some Intel Ibex Peak based platforms support so-called "intelligent
26 * power sharing", which allows the CPU and GPU to cooperate to maximize
27 * performance within a given TDP (thermal design point). This driver
28 * performs the coordination between the CPU and GPU, monitors thermal and
29 * power statistics in the platform, and initializes power monitoring
30 * hardware. It also provides a few tunables to control behavior. Its
31 * primary purpose is to safely allow CPU and GPU turbo modes to be enabled
32 * by tracking power and thermal budget; secondarily it can boost turbo
33 * performance by allocating more power or thermal budget to the CPU or GPU
34 * based on available headroom and activity.
36 * The basic algorithm is driven by a 5s moving average of tempurature. If
37 * thermal headroom is available, the CPU and/or GPU power clamps may be
38 * adjusted upwards. If we hit the thermal ceiling or a thermal trigger,
39 * we scale back the clamp. Aside from trigger events (when we're critically
40 * close or over our TDP) we don't adjust the clamps more than once every
43 * The thermal device (device 31, function 6) has a set of registers that
44 * are updated by the ME firmware. The ME should also take the clamp values
45 * written to those registers and write them to the CPU, but we currently
46 * bypass that functionality and write the CPU MSR directly.
52 * - handle CPU hotplug
53 * - provide turbo enable/disable api
56 * - CDI 403777, 403778 - Auburndale EDS vol 1 & 2
57 * - CDI 401376 - Ibex Peak EDS
58 * - ref 26037, 26641 - IPS BIOS spec
59 * - ref 26489 - Nehalem BIOS writer's guide
60 * - ref 26921 - Ibex Peak BIOS Specification
63 #include <linux/debugfs.h>
64 #include <linux/delay.h>
65 #include <linux/interrupt.h>
66 #include <linux/kernel.h>
67 #include <linux/kthread.h>
68 #include <linux/module.h>
69 #include <linux/pci.h>
70 #include <linux/sched.h>
71 #include <linux/seq_file.h>
72 #include <linux/string.h>
73 #include <linux/tick.h>
74 #include <linux/timer.h>
75 #include <linux/dmi.h>
76 #include <drm/i915_drm.h>
78 #include <asm/processor.h>
79 #include "intel_ips.h"
81 #include <asm-generic/io-64-nonatomic-lo-hi.h>
83 #define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
86 * Package level MSRs for monitor/control
88 #define PLATFORM_INFO 0xce
89 #define PLATFORM_TDP (1<<29)
90 #define PLATFORM_RATIO (1<<28)
92 #define IA32_MISC_ENABLE 0x1a0
93 #define IA32_MISC_TURBO_EN (1ULL<<38)
95 #define TURBO_POWER_CURRENT_LIMIT 0x1ac
96 #define TURBO_TDC_OVR_EN (1UL<<31)
97 #define TURBO_TDC_MASK (0x000000007fff0000UL)
98 #define TURBO_TDC_SHIFT (16)
99 #define TURBO_TDP_OVR_EN (1UL<<15)
100 #define TURBO_TDP_MASK (0x0000000000003fffUL)
103 * Core/thread MSRs for monitoring
105 #define IA32_PERF_CTL 0x199
106 #define IA32_PERF_TURBO_DIS (1ULL<<32)
109 * Thermal PCI device regs
111 #define THM_CFG_TBAR 0x10
112 #define THM_CFG_TBAR_HI 0x14
114 #define THM_TSIU 0x00
118 #define THM_TSTR 0x03
119 #define THM_TSTTP 0x04
120 #define THM_TSCO 0x08
121 #define THM_TSES 0x0c
122 #define THM_TSGPEN 0x0d
123 #define TSGPEN_HOT_LOHI (1<<1)
124 #define TSGPEN_CRIT_LOHI (1<<2)
125 #define THM_TSPC 0x0e
126 #define THM_PPEC 0x10
129 #define PTA_SLOPE_MASK (0xff00)
130 #define PTA_SLOPE_SHIFT 8
131 #define PTA_OFFSET_MASK (0x00ff)
132 #define THM_MGTA 0x16
133 #define MGTA_SLOPE_MASK (0xff00)
134 #define MGTA_SLOPE_SHIFT 8
135 #define MGTA_OFFSET_MASK (0x00ff)
137 #define TRC_CORE2_EN (1<<15)
138 #define TRC_THM_EN (1<<12)
139 #define TRC_C6_WAR (1<<8)
140 #define TRC_CORE1_EN (1<<7)
141 #define TRC_CORE_PWR (1<<6)
142 #define TRC_PCH_EN (1<<5)
143 #define TRC_MCH_EN (1<<4)
144 #define TRC_DIMM4 (1<<3)
145 #define TRC_DIMM3 (1<<2)
146 #define TRC_DIMM2 (1<<1)
147 #define TRC_DIMM1 (1<<0)
150 #define TEN_UPDATE_EN 1
152 #define PSC_NTG (1<<0) /* No GFX turbo support */
153 #define PSC_NTPC (1<<1) /* No CPU turbo support */
154 #define PSC_PP_DEF (0<<2) /* Perf policy up to driver */
155 #define PSP_PP_PC (1<<2) /* BIOS prefers CPU perf */
156 #define PSP_PP_BAL (2<<2) /* BIOS wants balanced perf */
157 #define PSP_PP_GFX (3<<2) /* BIOS prefers GFX perf */
158 #define PSP_PBRT (1<<4) /* BIOS run time support */
159 #define THM_CTV1 0x30
160 #define CTV_TEMP_ERROR (1<<15)
161 #define CTV_TEMP_MASK 0x3f
163 #define THM_CTV2 0x32
164 #define THM_CEC 0x34 /* undocumented power accumulator in joules */
166 #define THM_HTS 0x50 /* 32 bits */
167 #define HTS_PCPL_MASK (0x7fe00000)
168 #define HTS_PCPL_SHIFT 21
169 #define HTS_GPL_MASK (0x001ff000)
170 #define HTS_GPL_SHIFT 12
171 #define HTS_PP_MASK (0x00000c00)
172 #define HTS_PP_SHIFT 10
174 #define HTS_PP_PROC 1
177 #define HTS_PCTD_DIS (1<<9)
178 #define HTS_GTD_DIS (1<<8)
179 #define HTS_PTL_MASK (0x000000fe)
180 #define HTS_PTL_SHIFT 1
181 #define HTS_NVV (1<<0)
182 #define THM_HTSHI 0x54 /* 16 bits */
183 #define HTS2_PPL_MASK (0x03ff)
184 #define HTS2_PRST_MASK (0x3c00)
185 #define HTS2_PRST_SHIFT 10
186 #define HTS2_PRST_UNLOADED 0
187 #define HTS2_PRST_RUNNING 1
188 #define HTS2_PRST_TDISOP 2 /* turbo disabled due to power */
189 #define HTS2_PRST_TDISHT 3 /* turbo disabled due to high temp */
190 #define HTS2_PRST_TDISUSR 4 /* user disabled turbo */
191 #define HTS2_PRST_TDISPLAT 5 /* platform disabled turbo */
192 #define HTS2_PRST_TDISPM 6 /* power management disabled turbo */
193 #define HTS2_PRST_TDISERR 7 /* some kind of error disabled turbo */
195 #define THM_MGTV 0x58
196 #define TV_MASK 0x000000000000ff00
199 #define PTV_MASK 0x00ff
200 #define THM_MMGPC 0x64
201 #define THM_MPPC 0x66
202 #define THM_MPCPC 0x68
203 #define THM_TSPIEN 0x82
204 #define TSPIEN_AUX_LOHI (1<<0)
205 #define TSPIEN_HOT_LOHI (1<<1)
206 #define TSPIEN_CRIT_LOHI (1<<2)
207 #define TSPIEN_AUX2_LOHI (1<<3)
208 #define THM_TSLOCK 0x83
212 #define STS_PCPL_MASK (0x7fe00000)
213 #define STS_PCPL_SHIFT 21
214 #define STS_GPL_MASK (0x001ff000)
215 #define STS_GPL_SHIFT 12
216 #define STS_PP_MASK (0x00000c00)
217 #define STS_PP_SHIFT 10
219 #define STS_PP_PROC 1
222 #define STS_PCTD_DIS (1<<9)
223 #define STS_GTD_DIS (1<<8)
224 #define STS_PTL_MASK (0x000000fe)
225 #define STS_PTL_SHIFT 1
226 #define STS_NVV (1<<0)
228 #define SEC_ACK (1<<0)
231 #define STS_PPL_MASK (0x0003ff00)
232 #define STS_PPL_SHIFT 16
236 #define ITV_ME_SEQNO_MASK 0x00ff0000 /* ME should update every ~200ms */
237 #define ITV_ME_SEQNO_SHIFT (16)
238 #define ITV_MCH_TEMP_MASK 0x0000ff00
239 #define ITV_MCH_TEMP_SHIFT (8)
240 #define ITV_PCH_TEMP_MASK 0x000000ff
242 #define thm_readb(off) readb(ips->regmap + (off))
243 #define thm_readw(off) readw(ips->regmap + (off))
244 #define thm_readl(off) readl(ips->regmap + (off))
245 #define thm_readq(off) readq(ips->regmap + (off))
247 #define thm_writeb(off, val) writeb((val), ips->regmap + (off))
248 #define thm_writew(off, val) writew((val), ips->regmap + (off))
249 #define thm_writel(off, val) writel((val), ips->regmap + (off))
251 static const int IPS_ADJUST_PERIOD
= 5000; /* ms */
252 static bool late_i915_load
= false;
254 /* For initial average collection */
255 static const int IPS_SAMPLE_PERIOD
= 200; /* ms */
256 static const int IPS_SAMPLE_WINDOW
= 5000; /* 5s moving window of samples */
257 #define IPS_SAMPLE_COUNT (IPS_SAMPLE_WINDOW / IPS_SAMPLE_PERIOD)
260 struct ips_mcp_limits
{
262 int cpu_model
; /* includes extended model... */
263 int mcp_power_limit
; /* mW units */
264 int core_power_limit
;
266 int core_temp_limit
; /* degrees C */
270 /* Max temps are -10 degrees C to avoid PROCHOT# */
272 struct ips_mcp_limits ips_sv_limits
= {
273 .mcp_power_limit
= 35000,
274 .core_power_limit
= 29000,
275 .mch_power_limit
= 20000,
276 .core_temp_limit
= 95,
280 struct ips_mcp_limits ips_lv_limits
= {
281 .mcp_power_limit
= 25000,
282 .core_power_limit
= 21000,
283 .mch_power_limit
= 13000,
284 .core_temp_limit
= 95,
288 struct ips_mcp_limits ips_ulv_limits
= {
289 .mcp_power_limit
= 18000,
290 .core_power_limit
= 14000,
291 .mch_power_limit
= 11000,
292 .core_temp_limit
= 95,
299 struct task_struct
*monitor
;
300 struct task_struct
*adjust
;
301 struct dentry
*debug_root
;
303 /* Average CPU core temps (all averages in .01 degrees C for precision) */
308 /* Average for the CPU (both cores?) */
310 /* Average power consumption (in mW) */
319 /* Maximums & prefs, protected by turbo status lock */
320 spinlock_t turbo_status_lock
;
323 u16 core_power_limit
;
325 bool cpu_turbo_enabled
;
327 bool gpu_turbo_enabled
;
330 bool poll_turbo_status
;
332 bool turbo_toggle_allowed
;
333 struct ips_mcp_limits
*limits
;
335 /* Optional MCH interfaces for if i915 is in use */
336 unsigned long (*read_mch_val
)(void);
337 bool (*gpu_raise
)(void);
338 bool (*gpu_lower
)(void);
339 bool (*gpu_busy
)(void);
340 bool (*gpu_turbo_disable
)(void);
342 /* For restoration at unload */
343 u64 orig_turbo_limit
;
344 u64 orig_turbo_ratios
;
348 ips_gpu_turbo_enabled(struct ips_driver
*ips
);
351 * ips_cpu_busy - is CPU busy?
352 * @ips: IPS driver struct
354 * Check CPU for load to see whether we should increase its thermal budget.
357 * True if the CPU could use more power, false otherwise.
359 static bool ips_cpu_busy(struct ips_driver
*ips
)
361 if ((avenrun
[0] >> FSHIFT
) > 1)
368 * ips_cpu_raise - raise CPU power clamp
369 * @ips: IPS driver struct
371 * Raise the CPU power clamp by %IPS_CPU_STEP, in accordance with TDP for
374 * We do this by adjusting the TURBO_POWER_CURRENT_LIMIT MSR upwards (as
375 * long as we haven't hit the TDP limit for the SKU).
377 static void ips_cpu_raise(struct ips_driver
*ips
)
380 u16 cur_tdp_limit
, new_tdp_limit
;
382 if (!ips
->cpu_turbo_enabled
)
385 rdmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_override
);
387 cur_tdp_limit
= turbo_override
& TURBO_TDP_MASK
;
388 new_tdp_limit
= cur_tdp_limit
+ 8; /* 1W increase */
390 /* Clamp to SKU TDP limit */
391 if (((new_tdp_limit
* 10) / 8) > ips
->core_power_limit
)
392 new_tdp_limit
= cur_tdp_limit
;
394 thm_writew(THM_MPCPC
, (new_tdp_limit
* 10) / 8);
396 turbo_override
|= TURBO_TDC_OVR_EN
| TURBO_TDP_OVR_EN
;
397 wrmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_override
);
399 turbo_override
&= ~TURBO_TDP_MASK
;
400 turbo_override
|= new_tdp_limit
;
402 wrmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_override
);
406 * ips_cpu_lower - lower CPU power clamp
407 * @ips: IPS driver struct
409 * Lower CPU power clamp b %IPS_CPU_STEP if possible.
411 * We do this by adjusting the TURBO_POWER_CURRENT_LIMIT MSR down, going
412 * as low as the platform limits will allow (though we could go lower there
413 * wouldn't be much point).
415 static void ips_cpu_lower(struct ips_driver
*ips
)
418 u16 cur_limit
, new_limit
;
420 rdmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_override
);
422 cur_limit
= turbo_override
& TURBO_TDP_MASK
;
423 new_limit
= cur_limit
- 8; /* 1W decrease */
425 /* Clamp to SKU TDP limit */
426 if (new_limit
< (ips
->orig_turbo_limit
& TURBO_TDP_MASK
))
427 new_limit
= ips
->orig_turbo_limit
& TURBO_TDP_MASK
;
429 thm_writew(THM_MPCPC
, (new_limit
* 10) / 8);
431 turbo_override
|= TURBO_TDC_OVR_EN
| TURBO_TDP_OVR_EN
;
432 wrmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_override
);
434 turbo_override
&= ~TURBO_TDP_MASK
;
435 turbo_override
|= new_limit
;
437 wrmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_override
);
441 * do_enable_cpu_turbo - internal turbo enable function
444 * Internal function for actually updating MSRs. When we enable/disable
445 * turbo, we need to do it on each CPU; this function is the one called
446 * by on_each_cpu() when needed.
448 static void do_enable_cpu_turbo(void *data
)
452 rdmsrl(IA32_PERF_CTL
, perf_ctl
);
453 if (perf_ctl
& IA32_PERF_TURBO_DIS
) {
454 perf_ctl
&= ~IA32_PERF_TURBO_DIS
;
455 wrmsrl(IA32_PERF_CTL
, perf_ctl
);
460 * ips_enable_cpu_turbo - enable turbo mode on all CPUs
461 * @ips: IPS driver struct
463 * Enable turbo mode by clearing the disable bit in IA32_PERF_CTL on
464 * all logical threads.
466 static void ips_enable_cpu_turbo(struct ips_driver
*ips
)
468 /* Already on, no need to mess with MSRs */
469 if (ips
->__cpu_turbo_on
)
472 if (ips
->turbo_toggle_allowed
)
473 on_each_cpu(do_enable_cpu_turbo
, ips
, 1);
475 ips
->__cpu_turbo_on
= true;
479 * do_disable_cpu_turbo - internal turbo disable function
482 * Internal function for actually updating MSRs. When we enable/disable
483 * turbo, we need to do it on each CPU; this function is the one called
484 * by on_each_cpu() when needed.
486 static void do_disable_cpu_turbo(void *data
)
490 rdmsrl(IA32_PERF_CTL
, perf_ctl
);
491 if (!(perf_ctl
& IA32_PERF_TURBO_DIS
)) {
492 perf_ctl
|= IA32_PERF_TURBO_DIS
;
493 wrmsrl(IA32_PERF_CTL
, perf_ctl
);
498 * ips_disable_cpu_turbo - disable turbo mode on all CPUs
499 * @ips: IPS driver struct
501 * Disable turbo mode by setting the disable bit in IA32_PERF_CTL on
502 * all logical threads.
504 static void ips_disable_cpu_turbo(struct ips_driver
*ips
)
506 /* Already off, leave it */
507 if (!ips
->__cpu_turbo_on
)
510 if (ips
->turbo_toggle_allowed
)
511 on_each_cpu(do_disable_cpu_turbo
, ips
, 1);
513 ips
->__cpu_turbo_on
= false;
517 * ips_gpu_busy - is GPU busy?
518 * @ips: IPS driver struct
520 * Check GPU for load to see whether we should increase its thermal budget.
521 * We need to call into the i915 driver in this case.
524 * True if the GPU could use more power, false otherwise.
526 static bool ips_gpu_busy(struct ips_driver
*ips
)
528 if (!ips_gpu_turbo_enabled(ips
))
531 return ips
->gpu_busy();
535 * ips_gpu_raise - raise GPU power clamp
536 * @ips: IPS driver struct
538 * Raise the GPU frequency/power if possible. We need to call into the
539 * i915 driver in this case.
541 static void ips_gpu_raise(struct ips_driver
*ips
)
543 if (!ips_gpu_turbo_enabled(ips
))
546 if (!ips
->gpu_raise())
547 ips
->gpu_turbo_enabled
= false;
553 * ips_gpu_lower - lower GPU power clamp
554 * @ips: IPS driver struct
556 * Lower GPU frequency/power if possible. Need to call i915.
558 static void ips_gpu_lower(struct ips_driver
*ips
)
560 if (!ips_gpu_turbo_enabled(ips
))
563 if (!ips
->gpu_lower())
564 ips
->gpu_turbo_enabled
= false;
570 * ips_enable_gpu_turbo - notify the gfx driver turbo is available
571 * @ips: IPS driver struct
573 * Call into the graphics driver indicating that it can safely use
576 static void ips_enable_gpu_turbo(struct ips_driver
*ips
)
578 if (ips
->__gpu_turbo_on
)
580 ips
->__gpu_turbo_on
= true;
584 * ips_disable_gpu_turbo - notify the gfx driver to disable turbo mode
585 * @ips: IPS driver struct
587 * Request that the graphics driver disable turbo mode.
589 static void ips_disable_gpu_turbo(struct ips_driver
*ips
)
591 /* Avoid calling i915 if turbo is already disabled */
592 if (!ips
->__gpu_turbo_on
)
595 if (!ips
->gpu_turbo_disable())
596 dev_err(&ips
->dev
->dev
, "failed to disable graphis turbo\n");
598 ips
->__gpu_turbo_on
= false;
602 * mcp_exceeded - check whether we're outside our thermal & power limits
603 * @ips: IPS driver struct
605 * Check whether the MCP is over its thermal or power budget.
607 static bool mcp_exceeded(struct ips_driver
*ips
)
614 spin_lock_irqsave(&ips
->turbo_status_lock
, flags
);
616 temp_limit
= ips
->mcp_temp_limit
* 100;
617 if (ips
->mcp_avg_temp
> temp_limit
)
620 avg_power
= ips
->cpu_avg_power
+ ips
->mch_avg_power
;
621 if (avg_power
> ips
->mcp_power_limit
)
624 spin_unlock_irqrestore(&ips
->turbo_status_lock
, flags
);
630 * cpu_exceeded - check whether a CPU core is outside its limits
631 * @ips: IPS driver struct
632 * @cpu: CPU number to check
634 * Check a given CPU's average temp or power is over its limit.
636 static bool cpu_exceeded(struct ips_driver
*ips
, int cpu
)
642 spin_lock_irqsave(&ips
->turbo_status_lock
, flags
);
643 avg
= cpu
? ips
->ctv2_avg_temp
: ips
->ctv1_avg_temp
;
644 if (avg
> (ips
->limits
->core_temp_limit
* 100))
646 if (ips
->cpu_avg_power
> ips
->core_power_limit
* 100)
648 spin_unlock_irqrestore(&ips
->turbo_status_lock
, flags
);
651 dev_info(&ips
->dev
->dev
,
652 "CPU power or thermal limit exceeded\n");
658 * mch_exceeded - check whether the GPU is over budget
659 * @ips: IPS driver struct
661 * Check the MCH temp & power against their maximums.
663 static bool mch_exceeded(struct ips_driver
*ips
)
668 spin_lock_irqsave(&ips
->turbo_status_lock
, flags
);
669 if (ips
->mch_avg_temp
> (ips
->limits
->mch_temp_limit
* 100))
671 if (ips
->mch_avg_power
> ips
->mch_power_limit
)
673 spin_unlock_irqrestore(&ips
->turbo_status_lock
, flags
);
679 * verify_limits - verify BIOS provided limits
680 * @ips: IPS structure
682 * BIOS can optionally provide non-default limits for power and temp. Check
683 * them here and use the defaults if the BIOS values are not provided or
684 * are otherwise unusable.
686 static void verify_limits(struct ips_driver
*ips
)
688 if (ips
->mcp_power_limit
< ips
->limits
->mcp_power_limit
||
689 ips
->mcp_power_limit
> 35000)
690 ips
->mcp_power_limit
= ips
->limits
->mcp_power_limit
;
692 if (ips
->mcp_temp_limit
< ips
->limits
->core_temp_limit
||
693 ips
->mcp_temp_limit
< ips
->limits
->mch_temp_limit
||
694 ips
->mcp_temp_limit
> 150)
695 ips
->mcp_temp_limit
= min(ips
->limits
->core_temp_limit
,
696 ips
->limits
->mch_temp_limit
);
700 * update_turbo_limits - get various limits & settings from regs
701 * @ips: IPS driver struct
703 * Update the IPS power & temp limits, along with turbo enable flags,
704 * based on latest register contents.
706 * Used at init time and for runtime BIOS support, which requires polling
707 * the regs for updates (as a result of AC->DC transition for example).
710 * Caller must hold turbo_status_lock (outside of init)
712 static void update_turbo_limits(struct ips_driver
*ips
)
714 u32 hts
= thm_readl(THM_HTS
);
716 ips
->cpu_turbo_enabled
= !(hts
& HTS_PCTD_DIS
);
718 * Disable turbo for now, until we can figure out why the power figures
721 ips
->cpu_turbo_enabled
= false;
724 ips
->gpu_turbo_enabled
= !(hts
& HTS_GTD_DIS
);
726 ips
->core_power_limit
= thm_readw(THM_MPCPC
);
727 ips
->mch_power_limit
= thm_readw(THM_MMGPC
);
728 ips
->mcp_temp_limit
= thm_readw(THM_PTL
);
729 ips
->mcp_power_limit
= thm_readw(THM_MPPC
);
732 /* Ignore BIOS CPU vs GPU pref */
736 * ips_adjust - adjust power clamp based on thermal state
737 * @data: ips driver structure
739 * Wake up every 5s or so and check whether we should adjust the power clamp.
740 * Check CPU and GPU load to determine which needs adjustment. There are
741 * several things to consider here:
742 * - do we need to adjust up or down?
747 * - is CPU or GPU preferred? (CPU is default)
749 * So, given the above, we do the following:
750 * - up (TDP available)
751 * - CPU not busy, GPU not busy - nothing
752 * - CPU busy, GPU not busy - adjust CPU up
753 * - CPU not busy, GPU busy - adjust GPU up
754 * - CPU busy, GPU busy - adjust preferred unit up, taking headroom from
755 * non-preferred unit if necessary
756 * - down (at TDP limit)
757 * - adjust both CPU and GPU down if possible
759 cpu+ gpu+ cpu+gpu- cpu-gpu+ cpu-gpu-
760 cpu < gpu < cpu+gpu+ cpu+ gpu+ nothing
761 cpu < gpu >= cpu+gpu-(mcp<) cpu+gpu-(mcp<) gpu- gpu-
762 cpu >= gpu < cpu-gpu+(mcp<) cpu- cpu-gpu+(mcp<) cpu-
763 cpu >= gpu >= cpu-gpu- cpu-gpu- cpu-gpu- cpu-gpu-
766 static int ips_adjust(void *data
)
768 struct ips_driver
*ips
= data
;
771 dev_dbg(&ips
->dev
->dev
, "starting ips-adjust thread\n");
774 * Adjust CPU and GPU clamps every 5s if needed. Doing it more
775 * often isn't recommended due to ME interaction.
778 bool cpu_busy
= ips_cpu_busy(ips
);
779 bool gpu_busy
= ips_gpu_busy(ips
);
781 spin_lock_irqsave(&ips
->turbo_status_lock
, flags
);
782 if (ips
->poll_turbo_status
)
783 update_turbo_limits(ips
);
784 spin_unlock_irqrestore(&ips
->turbo_status_lock
, flags
);
786 /* Update turbo status if necessary */
787 if (ips
->cpu_turbo_enabled
)
788 ips_enable_cpu_turbo(ips
);
790 ips_disable_cpu_turbo(ips
);
792 if (ips
->gpu_turbo_enabled
)
793 ips_enable_gpu_turbo(ips
);
795 ips_disable_gpu_turbo(ips
);
797 /* We're outside our comfort zone, crank them down */
798 if (mcp_exceeded(ips
)) {
804 if (!cpu_exceeded(ips
, 0) && cpu_busy
)
809 if (!mch_exceeded(ips
) && gpu_busy
)
815 schedule_timeout_interruptible(msecs_to_jiffies(IPS_ADJUST_PERIOD
));
816 } while (!kthread_should_stop());
818 dev_dbg(&ips
->dev
->dev
, "ips-adjust thread stopped\n");
824 * Helpers for reading out temp/power values and calculating their
825 * averages for the decision making and monitoring functions.
828 static u16
calc_avg_temp(struct ips_driver
*ips
, u16
*array
)
834 for (i
= 0; i
< IPS_SAMPLE_COUNT
; i
++)
835 total
+= (u64
)(array
[i
] * 100);
837 do_div(total
, IPS_SAMPLE_COUNT
);
844 static u16
read_mgtv(struct ips_driver
*ips
)
850 val
= thm_readq(THM_MGTV
);
851 val
= (val
& TV_MASK
) >> TV_SHIFT
;
853 slope
= offset
= thm_readw(THM_MGTA
);
854 slope
= (slope
& MGTA_SLOPE_MASK
) >> MGTA_SLOPE_SHIFT
;
855 offset
= offset
& MGTA_OFFSET_MASK
;
857 ret
= ((val
* slope
+ 0x40) >> 7) + offset
;
859 return 0; /* MCH temp reporting buggy */
862 static u16
read_ptv(struct ips_driver
*ips
)
864 u16 val
, slope
, offset
;
866 slope
= (ips
->pta_val
& PTA_SLOPE_MASK
) >> PTA_SLOPE_SHIFT
;
867 offset
= ips
->pta_val
& PTA_OFFSET_MASK
;
869 val
= thm_readw(THM_PTV
) & PTV_MASK
;
874 static u16
read_ctv(struct ips_driver
*ips
, int cpu
)
876 int reg
= cpu
? THM_CTV2
: THM_CTV1
;
879 val
= thm_readw(reg
);
880 if (!(val
& CTV_TEMP_ERROR
))
881 val
= (val
) >> 6; /* discard fractional component */
888 static u32
get_cpu_power(struct ips_driver
*ips
, u32
*last
, int period
)
894 * CEC is in joules/65535. Take difference over time to
897 val
= thm_readl(THM_CEC
);
899 /* period is in ms and we want mW */
900 ret
= (((val
- *last
) * 1000) / period
);
901 ret
= (ret
* 1000) / 65535;
907 static const u16 temp_decay_factor
= 2;
908 static u16
update_average_temp(u16 avg
, u16 val
)
912 /* Multiply by 100 for extra precision */
913 ret
= (val
* 100 / temp_decay_factor
) +
914 (((temp_decay_factor
- 1) * avg
) / temp_decay_factor
);
918 static const u16 power_decay_factor
= 2;
919 static u16
update_average_power(u32 avg
, u32 val
)
923 ret
= (val
/ power_decay_factor
) +
924 (((power_decay_factor
- 1) * avg
) / power_decay_factor
);
929 static u32
calc_avg_power(struct ips_driver
*ips
, u32
*array
)
935 for (i
= 0; i
< IPS_SAMPLE_COUNT
; i
++)
938 do_div(total
, IPS_SAMPLE_COUNT
);
944 static void monitor_timeout(unsigned long arg
)
946 wake_up_process((struct task_struct
*)arg
);
950 * ips_monitor - temp/power monitoring thread
951 * @data: ips driver structure
953 * This is the main function for the IPS driver. It monitors power and
954 * tempurature in the MCP and adjusts CPU and GPU power clams accordingly.
956 * We keep a 5s moving average of power consumption and tempurature. Using
957 * that data, along with CPU vs GPU preference, we adjust the power clamps
960 static int ips_monitor(void *data
)
962 struct ips_driver
*ips
= data
;
963 struct timer_list timer
;
964 unsigned long seqno_timestamp
, expire
, last_msecs
, last_sample_period
;
966 u32
*cpu_samples
, *mchp_samples
, old_cpu_power
;
967 u16
*mcp_samples
, *ctv1_samples
, *ctv2_samples
, *mch_samples
;
968 u8 cur_seqno
, last_seqno
;
970 mcp_samples
= kzalloc(sizeof(u16
) * IPS_SAMPLE_COUNT
, GFP_KERNEL
);
971 ctv1_samples
= kzalloc(sizeof(u16
) * IPS_SAMPLE_COUNT
, GFP_KERNEL
);
972 ctv2_samples
= kzalloc(sizeof(u16
) * IPS_SAMPLE_COUNT
, GFP_KERNEL
);
973 mch_samples
= kzalloc(sizeof(u16
) * IPS_SAMPLE_COUNT
, GFP_KERNEL
);
974 cpu_samples
= kzalloc(sizeof(u32
) * IPS_SAMPLE_COUNT
, GFP_KERNEL
);
975 mchp_samples
= kzalloc(sizeof(u32
) * IPS_SAMPLE_COUNT
, GFP_KERNEL
);
976 if (!mcp_samples
|| !ctv1_samples
|| !ctv2_samples
|| !mch_samples
||
977 !cpu_samples
|| !mchp_samples
) {
978 dev_err(&ips
->dev
->dev
,
979 "failed to allocate sample array, ips disabled\n");
989 last_seqno
= (thm_readl(THM_ITV
) & ITV_ME_SEQNO_MASK
) >>
991 seqno_timestamp
= get_jiffies_64();
993 old_cpu_power
= thm_readl(THM_CEC
);
994 schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD
));
996 /* Collect an initial average */
997 for (i
= 0; i
< IPS_SAMPLE_COUNT
; i
++) {
1001 mcp_samples
[i
] = read_ptv(ips
);
1003 val
= read_ctv(ips
, 0);
1004 ctv1_samples
[i
] = val
;
1006 val
= read_ctv(ips
, 1);
1007 ctv2_samples
[i
] = val
;
1009 val
= read_mgtv(ips
);
1010 mch_samples
[i
] = val
;
1012 cpu_power
= get_cpu_power(ips
, &old_cpu_power
,
1014 cpu_samples
[i
] = cpu_power
;
1016 if (ips
->read_mch_val
) {
1017 mchp
= ips
->read_mch_val();
1018 mchp_samples
[i
] = mchp
;
1021 schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD
));
1022 if (kthread_should_stop())
1026 ips
->mcp_avg_temp
= calc_avg_temp(ips
, mcp_samples
);
1027 ips
->ctv1_avg_temp
= calc_avg_temp(ips
, ctv1_samples
);
1028 ips
->ctv2_avg_temp
= calc_avg_temp(ips
, ctv2_samples
);
1029 ips
->mch_avg_temp
= calc_avg_temp(ips
, mch_samples
);
1030 ips
->cpu_avg_power
= calc_avg_power(ips
, cpu_samples
);
1031 ips
->mch_avg_power
= calc_avg_power(ips
, mchp_samples
);
1033 kfree(ctv1_samples
);
1034 kfree(ctv2_samples
);
1037 kfree(mchp_samples
);
1039 /* Start the adjustment thread now that we have data */
1040 wake_up_process(ips
->adjust
);
1043 * Ok, now we have an initial avg. From here on out, we track the
1044 * running avg using a decaying average calculation. This allows
1045 * us to reduce the sample frequency if the CPU and GPU are idle.
1047 old_cpu_power
= thm_readl(THM_CEC
);
1048 schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD
));
1049 last_sample_period
= IPS_SAMPLE_PERIOD
;
1051 setup_deferrable_timer_on_stack(&timer
, monitor_timeout
,
1052 (unsigned long)current
);
1054 u32 cpu_val
, mch_val
;
1058 val
= read_ptv(ips
);
1059 ips
->mcp_avg_temp
= update_average_temp(ips
->mcp_avg_temp
, val
);
1062 val
= read_ctv(ips
, 0);
1063 ips
->ctv1_avg_temp
=
1064 update_average_temp(ips
->ctv1_avg_temp
, val
);
1066 cpu_val
= get_cpu_power(ips
, &old_cpu_power
,
1067 last_sample_period
);
1068 ips
->cpu_avg_power
=
1069 update_average_power(ips
->cpu_avg_power
, cpu_val
);
1071 if (ips
->second_cpu
) {
1073 val
= read_ctv(ips
, 1);
1074 ips
->ctv2_avg_temp
=
1075 update_average_temp(ips
->ctv2_avg_temp
, val
);
1079 val
= read_mgtv(ips
);
1080 ips
->mch_avg_temp
= update_average_temp(ips
->mch_avg_temp
, val
);
1082 if (ips
->read_mch_val
) {
1083 mch_val
= ips
->read_mch_val();
1084 ips
->mch_avg_power
=
1085 update_average_power(ips
->mch_avg_power
,
1090 * Make sure ME is updating thermal regs.
1092 * If it's been more than a second since the last update,
1093 * the ME is probably hung.
1095 cur_seqno
= (thm_readl(THM_ITV
) & ITV_ME_SEQNO_MASK
) >>
1097 if (cur_seqno
== last_seqno
&&
1098 time_after(jiffies
, seqno_timestamp
+ HZ
)) {
1099 dev_warn(&ips
->dev
->dev
, "ME failed to update for more than 1s, likely hung\n");
1101 seqno_timestamp
= get_jiffies_64();
1102 last_seqno
= cur_seqno
;
1105 last_msecs
= jiffies_to_msecs(jiffies
);
1106 expire
= jiffies
+ msecs_to_jiffies(IPS_SAMPLE_PERIOD
);
1108 __set_current_state(TASK_INTERRUPTIBLE
);
1109 mod_timer(&timer
, expire
);
1112 /* Calculate actual sample period for power averaging */
1113 last_sample_period
= jiffies_to_msecs(jiffies
) - last_msecs
;
1114 if (!last_sample_period
)
1115 last_sample_period
= 1;
1116 } while (!kthread_should_stop());
1118 del_timer_sync(&timer
);
1119 destroy_timer_on_stack(&timer
);
1121 dev_dbg(&ips
->dev
->dev
, "ips-monitor thread stopped\n");
1127 #define THM_DUMPW(reg) \
1129 u16 val = thm_readw(reg); \
1130 dev_dbg(&ips->dev->dev, #reg ": 0x%04x\n", val); \
1132 #define THM_DUMPL(reg) \
1134 u32 val = thm_readl(reg); \
1135 dev_dbg(&ips->dev->dev, #reg ": 0x%08x\n", val); \
1137 #define THM_DUMPQ(reg) \
1139 u64 val = thm_readq(reg); \
1140 dev_dbg(&ips->dev->dev, #reg ": 0x%016x\n", val); \
1143 static void dump_thermal_info(struct ips_driver
*ips
)
1147 ptl
= thm_readw(THM_PTL
);
1148 dev_dbg(&ips
->dev
->dev
, "Processor temp limit: %d\n", ptl
);
1152 THM_DUMPW(THM_CTV1
);
1155 THM_DUMPQ(THM_MGTV
);
1160 * ips_irq_handler - handle temperature triggers and other IPS events
1164 * Handle temperature limit trigger events, generally by lowering the clamps.
1165 * If we're at a critical limit, we clamp back to the lowest possible value
1166 * to prevent emergency shutdown.
1168 static irqreturn_t
ips_irq_handler(int irq
, void *arg
)
1170 struct ips_driver
*ips
= arg
;
1171 u8 tses
= thm_readb(THM_TSES
);
1172 u8 tes
= thm_readb(THM_TES
);
1177 dev_info(&ips
->dev
->dev
, "TSES: 0x%02x\n", tses
);
1178 dev_info(&ips
->dev
->dev
, "TES: 0x%02x\n", tes
);
1180 /* STS update from EC? */
1184 sts
= thm_readl(THM_STS
);
1185 tc1
= thm_readl(THM_TC1
);
1187 if (sts
& STS_NVV
) {
1188 spin_lock(&ips
->turbo_status_lock
);
1189 ips
->core_power_limit
= (sts
& STS_PCPL_MASK
) >>
1191 ips
->mch_power_limit
= (sts
& STS_GPL_MASK
) >>
1193 /* ignore EC CPU vs GPU pref */
1194 ips
->cpu_turbo_enabled
= !(sts
& STS_PCTD_DIS
);
1196 * Disable turbo for now, until we can figure
1197 * out why the power figures are wrong
1199 ips
->cpu_turbo_enabled
= false;
1201 ips
->gpu_turbo_enabled
= !(sts
& STS_GTD_DIS
);
1202 ips
->mcp_temp_limit
= (sts
& STS_PTL_MASK
) >>
1204 ips
->mcp_power_limit
= (tc1
& STS_PPL_MASK
) >>
1207 spin_unlock(&ips
->turbo_status_lock
);
1209 thm_writeb(THM_SEC
, SEC_ACK
);
1211 thm_writeb(THM_TES
, tes
);
1216 dev_warn(&ips
->dev
->dev
,
1217 "thermal trip occurred, tses: 0x%04x\n", tses
);
1218 thm_writeb(THM_TSES
, tses
);
1224 #ifndef CONFIG_DEBUG_FS
1225 static void ips_debugfs_init(struct ips_driver
*ips
) { return; }
1226 static void ips_debugfs_cleanup(struct ips_driver
*ips
) { return; }
1229 /* Expose current state and limits in debugfs if possible */
1231 struct ips_debugfs_node
{
1232 struct ips_driver
*ips
;
1234 int (*show
)(struct seq_file
*m
, void *data
);
1237 static int show_cpu_temp(struct seq_file
*m
, void *data
)
1239 struct ips_driver
*ips
= m
->private;
1241 seq_printf(m
, "%d.%02d\n", ips
->ctv1_avg_temp
/ 100,
1242 ips
->ctv1_avg_temp
% 100);
1247 static int show_cpu_power(struct seq_file
*m
, void *data
)
1249 struct ips_driver
*ips
= m
->private;
1251 seq_printf(m
, "%dmW\n", ips
->cpu_avg_power
);
1256 static int show_cpu_clamp(struct seq_file
*m
, void *data
)
1261 rdmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_override
);
1263 tdp
= (int)(turbo_override
& TURBO_TDP_MASK
);
1264 tdc
= (int)((turbo_override
& TURBO_TDC_MASK
) >> TURBO_TDC_SHIFT
);
1266 /* Convert to .1W/A units */
1271 seq_printf(m
, "%d.%dW %d.%dA\n", tdp
/ 10, tdp
% 10,
1272 tdc
/ 10, tdc
% 10);
1277 static int show_mch_temp(struct seq_file
*m
, void *data
)
1279 struct ips_driver
*ips
= m
->private;
1281 seq_printf(m
, "%d.%02d\n", ips
->mch_avg_temp
/ 100,
1282 ips
->mch_avg_temp
% 100);
1287 static int show_mch_power(struct seq_file
*m
, void *data
)
1289 struct ips_driver
*ips
= m
->private;
1291 seq_printf(m
, "%dmW\n", ips
->mch_avg_power
);
1296 static struct ips_debugfs_node ips_debug_files
[] = {
1297 { NULL
, "cpu_temp", show_cpu_temp
},
1298 { NULL
, "cpu_power", show_cpu_power
},
1299 { NULL
, "cpu_clamp", show_cpu_clamp
},
1300 { NULL
, "mch_temp", show_mch_temp
},
1301 { NULL
, "mch_power", show_mch_power
},
1304 static int ips_debugfs_open(struct inode
*inode
, struct file
*file
)
1306 struct ips_debugfs_node
*node
= inode
->i_private
;
1308 return single_open(file
, node
->show
, node
->ips
);
1311 static const struct file_operations ips_debugfs_ops
= {
1312 .owner
= THIS_MODULE
,
1313 .open
= ips_debugfs_open
,
1315 .llseek
= seq_lseek
,
1316 .release
= single_release
,
1319 static void ips_debugfs_cleanup(struct ips_driver
*ips
)
1321 if (ips
->debug_root
)
1322 debugfs_remove_recursive(ips
->debug_root
);
1326 static void ips_debugfs_init(struct ips_driver
*ips
)
1330 ips
->debug_root
= debugfs_create_dir("ips", NULL
);
1331 if (!ips
->debug_root
) {
1332 dev_err(&ips
->dev
->dev
,
1333 "failed to create debugfs entries: %ld\n",
1334 PTR_ERR(ips
->debug_root
));
1338 for (i
= 0; i
< ARRAY_SIZE(ips_debug_files
); i
++) {
1340 struct ips_debugfs_node
*node
= &ips_debug_files
[i
];
1343 ent
= debugfs_create_file(node
->name
, S_IFREG
| S_IRUGO
,
1344 ips
->debug_root
, node
,
1347 dev_err(&ips
->dev
->dev
,
1348 "failed to create debug file: %ld\n",
1357 ips_debugfs_cleanup(ips
);
1360 #endif /* CONFIG_DEBUG_FS */
1363 * ips_detect_cpu - detect whether CPU supports IPS
1365 * Walk our list and see if we're on a supported CPU. If we find one,
1366 * return the limits for it.
1368 static struct ips_mcp_limits
*ips_detect_cpu(struct ips_driver
*ips
)
1370 u64 turbo_power
, misc_en
;
1371 struct ips_mcp_limits
*limits
= NULL
;
1374 if (!(boot_cpu_data
.x86
== 6 && boot_cpu_data
.x86_model
== 37)) {
1375 dev_info(&ips
->dev
->dev
, "Non-IPS CPU detected.\n");
1379 rdmsrl(IA32_MISC_ENABLE
, misc_en
);
1381 * If the turbo enable bit isn't set, we shouldn't try to enable/disable
1382 * turbo manually or we'll get an illegal MSR access, even though
1383 * turbo will still be available.
1385 if (misc_en
& IA32_MISC_TURBO_EN
)
1386 ips
->turbo_toggle_allowed
= true;
1388 ips
->turbo_toggle_allowed
= false;
1390 if (strstr(boot_cpu_data
.x86_model_id
, "CPU M"))
1391 limits
= &ips_sv_limits
;
1392 else if (strstr(boot_cpu_data
.x86_model_id
, "CPU L"))
1393 limits
= &ips_lv_limits
;
1394 else if (strstr(boot_cpu_data
.x86_model_id
, "CPU U"))
1395 limits
= &ips_ulv_limits
;
1397 dev_info(&ips
->dev
->dev
, "No CPUID match found.\n");
1401 rdmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_power
);
1402 tdp
= turbo_power
& TURBO_TDP_MASK
;
1404 /* Sanity check TDP against CPU */
1405 if (limits
->core_power_limit
!= (tdp
/ 8) * 1000) {
1406 dev_info(&ips
->dev
->dev
, "CPU TDP doesn't match expected value (found %d, expected %d)\n",
1407 tdp
/ 8, limits
->core_power_limit
/ 1000);
1408 limits
->core_power_limit
= (tdp
/ 8) * 1000;
1416 * ips_get_i915_syms - try to get GPU control methods from i915 driver
1419 * The i915 driver exports several interfaces to allow the IPS driver to
1420 * monitor and control graphics turbo mode. If we can find them, we can
1421 * enable graphics turbo, otherwise we must disable it to avoid exceeding
1422 * thermal and power limits in the MCP.
1424 static bool ips_get_i915_syms(struct ips_driver
*ips
)
1426 ips
->read_mch_val
= symbol_get(i915_read_mch_val
);
1427 if (!ips
->read_mch_val
)
1429 ips
->gpu_raise
= symbol_get(i915_gpu_raise
);
1430 if (!ips
->gpu_raise
)
1432 ips
->gpu_lower
= symbol_get(i915_gpu_lower
);
1433 if (!ips
->gpu_lower
)
1435 ips
->gpu_busy
= symbol_get(i915_gpu_busy
);
1438 ips
->gpu_turbo_disable
= symbol_get(i915_gpu_turbo_disable
);
1439 if (!ips
->gpu_turbo_disable
)
1445 symbol_put(i915_gpu_busy
);
1447 symbol_put(i915_gpu_lower
);
1449 symbol_put(i915_gpu_raise
);
1451 symbol_put(i915_read_mch_val
);
1457 ips_gpu_turbo_enabled(struct ips_driver
*ips
)
1459 if (!ips
->gpu_busy
&& late_i915_load
) {
1460 if (ips_get_i915_syms(ips
)) {
1461 dev_info(&ips
->dev
->dev
,
1462 "i915 driver attached, reenabling gpu turbo\n");
1463 ips
->gpu_turbo_enabled
= !(thm_readl(THM_HTS
) & HTS_GTD_DIS
);
1467 return ips
->gpu_turbo_enabled
;
1471 ips_link_to_i915_driver(void)
1473 /* We can't cleanly get at the various ips_driver structs from
1474 * this caller (the i915 driver), so just set a flag saying
1475 * that it's time to try getting the symbols again.
1477 late_i915_load
= true;
1479 EXPORT_SYMBOL_GPL(ips_link_to_i915_driver
);
1481 static DEFINE_PCI_DEVICE_TABLE(ips_id_table
) = {
1482 { PCI_DEVICE(PCI_VENDOR_ID_INTEL
,
1483 PCI_DEVICE_ID_INTEL_THERMAL_SENSOR
), },
1487 MODULE_DEVICE_TABLE(pci
, ips_id_table
);
1489 static int ips_blacklist_callback(const struct dmi_system_id
*id
)
1491 pr_info("Blacklisted intel_ips for %s\n", id
->ident
);
1495 static const struct dmi_system_id ips_blacklist
[] = {
1497 .callback
= ips_blacklist_callback
,
1498 .ident
= "HP ProBook",
1500 DMI_MATCH(DMI_SYS_VENDOR
, "Hewlett-Packard"),
1501 DMI_MATCH(DMI_PRODUCT_NAME
, "HP ProBook"),
1504 { } /* terminating entry */
1507 static int ips_probe(struct pci_dev
*dev
, const struct pci_device_id
*id
)
1510 struct ips_driver
*ips
;
1513 u16 htshi
, trc
, trc_required_mask
;
1516 if (dmi_check_system(ips_blacklist
))
1519 ips
= kzalloc(sizeof(struct ips_driver
), GFP_KERNEL
);
1523 pci_set_drvdata(dev
, ips
);
1526 ips
->limits
= ips_detect_cpu(ips
);
1528 dev_info(&dev
->dev
, "IPS not supported on this CPU\n");
1533 spin_lock_init(&ips
->turbo_status_lock
);
1535 ret
= pci_enable_device(dev
);
1537 dev_err(&dev
->dev
, "can't enable PCI device, aborting\n");
1541 if (!pci_resource_start(dev
, 0)) {
1542 dev_err(&dev
->dev
, "TBAR not assigned, aborting\n");
1547 ret
= pci_request_regions(dev
, "ips thermal sensor");
1549 dev_err(&dev
->dev
, "thermal resource busy, aborting\n");
1554 ips
->regmap
= ioremap(pci_resource_start(dev
, 0),
1555 pci_resource_len(dev
, 0));
1557 dev_err(&dev
->dev
, "failed to map thermal regs, aborting\n");
1562 tse
= thm_readb(THM_TSE
);
1563 if (tse
!= TSE_EN
) {
1564 dev_err(&dev
->dev
, "thermal device not enabled (0x%02x), aborting\n", tse
);
1569 trc
= thm_readw(THM_TRC
);
1570 trc_required_mask
= TRC_CORE1_EN
| TRC_CORE_PWR
| TRC_MCH_EN
;
1571 if ((trc
& trc_required_mask
) != trc_required_mask
) {
1572 dev_err(&dev
->dev
, "thermal reporting for required devices not enabled, aborting\n");
1577 if (trc
& TRC_CORE2_EN
)
1578 ips
->second_cpu
= true;
1580 update_turbo_limits(ips
);
1581 dev_dbg(&dev
->dev
, "max cpu power clamp: %dW\n",
1582 ips
->mcp_power_limit
/ 10);
1583 dev_dbg(&dev
->dev
, "max core power clamp: %dW\n",
1584 ips
->core_power_limit
/ 10);
1585 /* BIOS may update limits at runtime */
1586 if (thm_readl(THM_PSC
) & PSP_PBRT
)
1587 ips
->poll_turbo_status
= true;
1589 if (!ips_get_i915_syms(ips
)) {
1590 dev_info(&dev
->dev
, "failed to get i915 symbols, graphics turbo disabled until i915 loads\n");
1591 ips
->gpu_turbo_enabled
= false;
1593 dev_dbg(&dev
->dev
, "graphics turbo enabled\n");
1594 ips
->gpu_turbo_enabled
= true;
1598 * Check PLATFORM_INFO MSR to make sure this chip is
1601 rdmsrl(PLATFORM_INFO
, platform_info
);
1602 if (!(platform_info
& PLATFORM_TDP
)) {
1603 dev_err(&dev
->dev
, "platform indicates TDP override unavailable, aborting\n");
1609 * IRQ handler for ME interaction
1610 * Note: don't use MSI here as the PCH has bugs.
1612 pci_disable_msi(dev
);
1613 ret
= request_irq(dev
->irq
, ips_irq_handler
, IRQF_SHARED
, "ips",
1616 dev_err(&dev
->dev
, "request irq failed, aborting\n");
1620 /* Enable aux, hot & critical interrupts */
1621 thm_writeb(THM_TSPIEN
, TSPIEN_AUX2_LOHI
| TSPIEN_CRIT_LOHI
|
1622 TSPIEN_HOT_LOHI
| TSPIEN_AUX_LOHI
);
1623 thm_writeb(THM_TEN
, TEN_UPDATE_EN
);
1625 /* Collect adjustment values */
1626 ips
->cta_val
= thm_readw(THM_CTA
);
1627 ips
->pta_val
= thm_readw(THM_PTA
);
1628 ips
->mgta_val
= thm_readw(THM_MGTA
);
1630 /* Save turbo limits & ratios */
1631 rdmsrl(TURBO_POWER_CURRENT_LIMIT
, ips
->orig_turbo_limit
);
1633 ips_disable_cpu_turbo(ips
);
1634 ips
->cpu_turbo_enabled
= false;
1636 /* Create thermal adjust thread */
1637 ips
->adjust
= kthread_create(ips_adjust
, ips
, "ips-adjust");
1638 if (IS_ERR(ips
->adjust
)) {
1640 "failed to create thermal adjust thread, aborting\n");
1642 goto error_free_irq
;
1647 * Set up the work queue and monitor thread. The monitor thread
1648 * will wake up ips_adjust thread.
1650 ips
->monitor
= kthread_run(ips_monitor
, ips
, "ips-monitor");
1651 if (IS_ERR(ips
->monitor
)) {
1653 "failed to create thermal monitor thread, aborting\n");
1655 goto error_thread_cleanup
;
1658 hts
= (ips
->core_power_limit
<< HTS_PCPL_SHIFT
) |
1659 (ips
->mcp_temp_limit
<< HTS_PTL_SHIFT
) | HTS_NVV
;
1660 htshi
= HTS2_PRST_RUNNING
<< HTS2_PRST_SHIFT
;
1662 thm_writew(THM_HTSHI
, htshi
);
1663 thm_writel(THM_HTS
, hts
);
1665 ips_debugfs_init(ips
);
1667 dev_info(&dev
->dev
, "IPS driver initialized, MCP temp limit %d\n",
1668 ips
->mcp_temp_limit
);
1671 error_thread_cleanup
:
1672 kthread_stop(ips
->adjust
);
1674 free_irq(ips
->dev
->irq
, ips
);
1676 iounmap(ips
->regmap
);
1678 pci_release_regions(dev
);
1684 static void ips_remove(struct pci_dev
*dev
)
1686 struct ips_driver
*ips
= pci_get_drvdata(dev
);
1692 ips_debugfs_cleanup(ips
);
1694 /* Release i915 driver */
1695 if (ips
->read_mch_val
)
1696 symbol_put(i915_read_mch_val
);
1698 symbol_put(i915_gpu_raise
);
1700 symbol_put(i915_gpu_lower
);
1702 symbol_put(i915_gpu_busy
);
1703 if (ips
->gpu_turbo_disable
)
1704 symbol_put(i915_gpu_turbo_disable
);
1706 rdmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_override
);
1707 turbo_override
&= ~(TURBO_TDC_OVR_EN
| TURBO_TDP_OVR_EN
);
1708 wrmsrl(TURBO_POWER_CURRENT_LIMIT
, turbo_override
);
1709 wrmsrl(TURBO_POWER_CURRENT_LIMIT
, ips
->orig_turbo_limit
);
1711 free_irq(ips
->dev
->irq
, ips
);
1713 kthread_stop(ips
->adjust
);
1715 kthread_stop(ips
->monitor
);
1716 iounmap(ips
->regmap
);
1717 pci_release_regions(dev
);
1719 dev_dbg(&dev
->dev
, "IPS driver removed\n");
1722 static void ips_shutdown(struct pci_dev
*dev
)
1726 static struct pci_driver ips_pci_driver
= {
1727 .name
= "intel ips",
1728 .id_table
= ips_id_table
,
1730 .remove
= ips_remove
,
1731 .shutdown
= ips_shutdown
,
1734 static int __init
ips_init(void)
1736 return pci_register_driver(&ips_pci_driver
);
1738 module_init(ips_init
);
1740 static void ips_exit(void)
1742 pci_unregister_driver(&ips_pci_driver
);
1745 module_exit(ips_exit
);
1747 MODULE_LICENSE("GPL");
1748 MODULE_AUTHOR("Jesse Barnes <jbarnes@virtuousgeek.org>");
1749 MODULE_DESCRIPTION("Intelligent Power Sharing Driver");