10 config ARCH_DAVINCI_DMx
14 menu "TI DaVinci Implementations"
16 comment "DaVinci Core Type"
18 config ARCH_DAVINCI_DM644x
19 bool "DaVinci 644x based system"
21 select ARCH_DAVINCI_DMx
23 config ARCH_DAVINCI_DM355
24 bool "DaVinci 355 based system"
26 select ARCH_DAVINCI_DMx
28 config ARCH_DAVINCI_DM646x
29 bool "DaVinci 646x based system"
31 select ARCH_DAVINCI_DMx
33 config ARCH_DAVINCI_DA830
34 bool "DA830/OMAP-L137/AM17x based system"
36 select ARCH_DAVINCI_DA8XX
37 select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
39 config ARCH_DAVINCI_DA850
40 bool "DA850/OMAP-L138/AM18x based system"
42 select ARCH_DAVINCI_DA8XX
43 select ARCH_HAS_CPUFREQ
45 config ARCH_DAVINCI_DA8XX
49 config ARCH_DAVINCI_DM365
50 bool "DaVinci 365 based system"
52 select ARCH_DAVINCI_DMx
54 config ARCH_DAVINCI_TNETV107X
57 bool "TNETV107X based system"
59 comment "DaVinci Board Type"
61 config MACH_DAVINCI_EVM
63 default ARCH_DAVINCI_DM644x
64 depends on ARCH_DAVINCI_DM644x
68 Configure this option to specify the whether the board used
69 for development is a DM644x EVM
73 depends on ARCH_DAVINCI_DM644x
77 Say Y here to select the Lyrtech Small Form Factor
78 Software Defined Radio (SFFSDR) board.
80 config MACH_NEUROS_OSD2
81 bool "Neuros OSD2 Open Television Set Top Box"
82 depends on ARCH_DAVINCI_DM644x
84 Configure this option to specify the whether the board used
85 for development is a Neuros OSD2 Open Set Top Box.
87 config MACH_DAVINCI_DM355_EVM
89 default ARCH_DAVINCI_DM355
90 depends on ARCH_DAVINCI_DM355
92 Configure this option to specify the whether the board used
93 for development is a DM355 EVM
95 config MACH_DM355_LEOPARD
96 bool "DM355 Leopard board"
97 depends on ARCH_DAVINCI_DM355
99 Configure this option to specify the whether the board used
100 for development is a DM355 Leopard board.
102 config MACH_DAVINCI_DM6467_EVM
104 default ARCH_DAVINCI_DM646x
105 depends on ARCH_DAVINCI_DM646x
106 select MACH_DAVINCI_DM6467TEVM
110 Configure this option to specify the whether the board used
111 for development is a DM6467 EVM
113 config MACH_DAVINCI_DM6467TEVM
116 config MACH_DAVINCI_DM365_EVM
118 default ARCH_DAVINCI_DM365
119 depends on ARCH_DAVINCI_DM365
123 Configure this option to specify whether the board used
124 for development is a DM365 EVM
126 config MACH_DAVINCI_DA830_EVM
127 bool "TI DA830/OMAP-L137/AM17x Reference Platform"
128 default ARCH_DAVINCI_DA830
129 depends on ARCH_DAVINCI_DA830
134 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
137 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
138 depends on MACH_DAVINCI_DA830_EVM
140 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
141 detected automatically based on successful probe of the I2C
142 based GPIO expander on that board. This option selected in this
143 menu has an effect only in case of a successful UI card detection.
148 Say Y here to use the LCD as a framebuffer or simple character
154 Say Y here to use the NAND flash. Do not forget to setup
155 the switch correctly.
158 config MACH_DAVINCI_DA850_EVM
159 bool "TI DA850/OMAP-L138/AM18x Reference Platform"
160 default ARCH_DAVINCI_DA850
161 depends on ARCH_DAVINCI_DA850
163 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
166 prompt "Select peripherals connected to expander on UI board"
167 depends on MACH_DAVINCI_DA850_EVM
169 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
170 EVM is detected automatically based on successful probe of the I2C
171 based GPIO expander on that card. This option selected in this
172 menu has an effect only in case of a successful UI card detection.
175 bool "No peripheral is enabled"
177 Say Y if you do not want to enable any of the peripherals connected
178 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
181 bool "RMII Ethernet PHY"
183 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
184 EVM. This PHY is found on the UI daughter card that is supplied with
186 NOTE: Please take care while choosing this option, MII PHY will
187 not be functional if RMII mode is selected.
192 bool "AM18x wl1271 daughter board"
193 depends on MACH_DAVINCI_DA850_EVM
195 The wl1271 daughter card for AM18x EVMs is a combo wireless
196 connectivity add-on card, based on the LS Research TiWi module with
197 Texas Instruments' wl1271 solution.
198 Say Y if you want to use a wl1271 expansion card connected to the
202 default MACH_DAVINCI_DA850_EVM
204 config KEYBOARD_GPIO_POLLED
205 default MACH_DAVINCI_DA850_EVM
207 config MACH_TNETV107X
208 bool "TI TNETV107X Reference Platform"
209 default ARCH_DAVINCI_TNETV107X
210 depends on ARCH_DAVINCI_TNETV107X
212 Say Y here to select the TI TNETV107X Evaluation Module.
214 config MACH_MITYOMAPL138
215 bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
216 depends on ARCH_DAVINCI_DA850
220 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
221 System on Module. Information on this SoM may be found at
222 http://www.mitydsp.com
224 config MACH_OMAPL138_HAWKBOARD
225 bool "TI AM1808 / OMAPL-138 Hawkboard platform"
226 depends on ARCH_DAVINCI_DA850
228 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
229 Information of this board may be found at
230 http://www.hawkboard.org/
233 bool "DAVINCI multiplexing support"
234 depends on ARCH_DAVINCI
237 Pin multiplexing support for DAVINCI boards. If your bootloader
238 sets the multiplexing correctly, say N. Otherwise, or if unsure,
241 config DAVINCI_MUX_DEBUG
242 bool "Multiplexing debug output"
243 depends on DAVINCI_MUX
245 Makes the multiplexing functions print out a lot of debug info.
246 This is useful if you want to find out the correct values of the
247 multiplexing registers.
249 config DAVINCI_MUX_WARNINGS
250 bool "Warn about pins the bootloader didn't set up"
251 depends on DAVINCI_MUX
253 Choose Y here to warn whenever driver initialization logic needs
254 to change the pin multiplexing setup. When there are no warnings
255 printed, it's safe to deselect DAVINCI_MUX for your product.
257 config DAVINCI_RESET_CLOCKS
258 bool "Reset unused clocks during boot"
259 depends on ARCH_DAVINCI
261 Say Y if you want to reset unused clocks during boot.
262 This option saves power, but assumes all drivers are
263 using the clock framework. Broken drivers that do not
264 yet use clock framework may not work with this option.
265 If you are booting from another operating system, you
266 probably do not want this option enabled until your
267 device drivers work properly.