2 * SLUB: A slab allocator that limits cache line use instead of queuing
3 * objects in per cpu and per node lists.
5 * The allocator synchronizes using per slab locks and only
6 * uses a centralized lock to manage a pool of partial slabs.
8 * (C) 2007 SGI, Christoph Lameter <clameter@sgi.com>
12 #include <linux/module.h>
13 #include <linux/bit_spinlock.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/slab.h>
17 #include <linux/seq_file.h>
18 #include <linux/cpu.h>
19 #include <linux/cpuset.h>
20 #include <linux/mempolicy.h>
21 #include <linux/ctype.h>
22 #include <linux/kallsyms.h>
29 * The slab_lock protects operations on the object of a particular
30 * slab and its metadata in the page struct. If the slab lock
31 * has been taken then no allocations nor frees can be performed
32 * on the objects in the slab nor can the slab be added or removed
33 * from the partial or full lists since this would mean modifying
34 * the page_struct of the slab.
36 * The list_lock protects the partial and full list on each node and
37 * the partial slab counter. If taken then no new slabs may be added or
38 * removed from the lists nor make the number of partial slabs be modified.
39 * (Note that the total number of slabs is an atomic value that may be
40 * modified without taking the list lock).
42 * The list_lock is a centralized lock and thus we avoid taking it as
43 * much as possible. As long as SLUB does not have to handle partial
44 * slabs, operations can continue without any centralized lock. F.e.
45 * allocating a long series of objects that fill up slabs does not require
48 * The lock order is sometimes inverted when we are trying to get a slab
49 * off a list. We take the list_lock and then look for a page on the list
50 * to use. While we do that objects in the slabs may be freed. We can
51 * only operate on the slab if we have also taken the slab_lock. So we use
52 * a slab_trylock() on the slab. If trylock was successful then no frees
53 * can occur anymore and we can use the slab for allocations etc. If the
54 * slab_trylock() does not succeed then frees are in progress in the slab and
55 * we must stay away from it for a while since we may cause a bouncing
56 * cacheline if we try to acquire the lock. So go onto the next slab.
57 * If all pages are busy then we may allocate a new slab instead of reusing
58 * a partial slab. A new slab has noone operating on it and thus there is
59 * no danger of cacheline contention.
61 * Interrupts are disabled during allocation and deallocation in order to
62 * make the slab allocator safe to use in the context of an irq. In addition
63 * interrupts are disabled to ensure that the processor does not change
64 * while handling per_cpu slabs, due to kernel preemption.
66 * SLUB assigns one slab for allocation to each processor.
67 * Allocations only occur from these slabs called cpu slabs.
69 * Slabs with free elements are kept on a partial list and during regular
70 * operations no list for full slabs is used. If an object in a full slab is
71 * freed then the slab will show up again on the partial lists.
72 * We track full slabs for debugging purposes though because otherwise we
73 * cannot scan all objects.
75 * Slabs are freed when they become empty. Teardown and setup is
76 * minimal so we rely on the page allocators per cpu caches for
77 * fast frees and allocs.
79 * Overloading of page flags that are otherwise used for LRU management.
81 * PageActive The slab is frozen and exempt from list processing.
82 * This means that the slab is dedicated to a purpose
83 * such as satisfying allocations for a specific
84 * processor. Objects may be freed in the slab while
85 * it is frozen but slab_free will then skip the usual
86 * list operations. It is up to the processor holding
87 * the slab to integrate the slab into the slab lists
88 * when the slab is no longer needed.
90 * One use of this flag is to mark slabs that are
91 * used for allocations. Then such a slab becomes a cpu
92 * slab. The cpu slab may be equipped with an additional
93 * lockless_freelist that allows lockless access to
94 * free objects in addition to the regular freelist
95 * that requires the slab lock.
97 * PageError Slab requires special handling due to debug
98 * options set. This moves slab handling out of
99 * the fast path and disables lockless freelists.
102 #define FROZEN (1 << PG_active)
104 #ifdef CONFIG_SLUB_DEBUG
105 #define SLABDEBUG (1 << PG_error)
110 static inline int SlabFrozen(struct page
*page
)
112 return page
->flags
& FROZEN
;
115 static inline void SetSlabFrozen(struct page
*page
)
117 page
->flags
|= FROZEN
;
120 static inline void ClearSlabFrozen(struct page
*page
)
122 page
->flags
&= ~FROZEN
;
125 static inline int SlabDebug(struct page
*page
)
127 return page
->flags
& SLABDEBUG
;
130 static inline void SetSlabDebug(struct page
*page
)
132 page
->flags
|= SLABDEBUG
;
135 static inline void ClearSlabDebug(struct page
*page
)
137 page
->flags
&= ~SLABDEBUG
;
141 * Issues still to be resolved:
143 * - The per cpu array is updated for each new slab and and is a remote
144 * cacheline for most nodes. This could become a bouncing cacheline given
145 * enough frequent updates. There are 16 pointers in a cacheline, so at
146 * max 16 cpus could compete for the cacheline which may be okay.
148 * - Support PAGE_ALLOC_DEBUG. Should be easy to do.
150 * - Variable sizing of the per node arrays
153 /* Enable to test recovery from slab corruption on boot */
154 #undef SLUB_RESILIENCY_TEST
159 * Small page size. Make sure that we do not fragment memory
161 #define DEFAULT_MAX_ORDER 1
162 #define DEFAULT_MIN_OBJECTS 4
167 * Large page machines are customarily able to handle larger
170 #define DEFAULT_MAX_ORDER 2
171 #define DEFAULT_MIN_OBJECTS 8
176 * Mininum number of partial slabs. These will be left on the partial
177 * lists even if they are empty. kmem_cache_shrink may reclaim them.
179 #define MIN_PARTIAL 2
182 * Maximum number of desirable partial slabs.
183 * The existence of more partial slabs makes kmem_cache_shrink
184 * sort the partial list by the number of objects in the.
186 #define MAX_PARTIAL 10
188 #define DEBUG_DEFAULT_FLAGS (SLAB_DEBUG_FREE | SLAB_RED_ZONE | \
189 SLAB_POISON | SLAB_STORE_USER)
192 * Set of flags that will prevent slab merging
194 #define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
195 SLAB_TRACE | SLAB_DESTROY_BY_RCU)
197 #define SLUB_MERGE_SAME (SLAB_DEBUG_FREE | SLAB_RECLAIM_ACCOUNT | \
200 #ifndef ARCH_KMALLOC_MINALIGN
201 #define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
204 #ifndef ARCH_SLAB_MINALIGN
205 #define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
209 * The page->inuse field is 16 bit thus we have this limitation
211 #define MAX_OBJECTS_PER_SLAB 65535
213 /* Internal SLUB flags */
214 #define __OBJECT_POISON 0x80000000 /* Poison object */
216 /* Not all arches define cache_line_size */
217 #ifndef cache_line_size
218 #define cache_line_size() L1_CACHE_BYTES
221 static int kmem_size
= sizeof(struct kmem_cache
);
224 static struct notifier_block slab_notifier
;
228 DOWN
, /* No slab functionality available */
229 PARTIAL
, /* kmem_cache_open() works but kmalloc does not */
230 UP
, /* Everything works but does not show up in sysfs */
234 /* A list of all slab caches on the system */
235 static DECLARE_RWSEM(slub_lock
);
236 static LIST_HEAD(slab_caches
);
239 * Tracking user of a slab.
242 void *addr
; /* Called from address */
243 int cpu
; /* Was running on cpu */
244 int pid
; /* Pid context */
245 unsigned long when
; /* When did the operation occur */
248 enum track_item
{ TRACK_ALLOC
, TRACK_FREE
};
250 #if defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)
251 static int sysfs_slab_add(struct kmem_cache
*);
252 static int sysfs_slab_alias(struct kmem_cache
*, const char *);
253 static void sysfs_slab_remove(struct kmem_cache
*);
255 static inline int sysfs_slab_add(struct kmem_cache
*s
) { return 0; }
256 static inline int sysfs_slab_alias(struct kmem_cache
*s
, const char *p
)
258 static inline void sysfs_slab_remove(struct kmem_cache
*s
) {}
261 /********************************************************************
262 * Core slab cache functions
263 *******************************************************************/
265 int slab_is_available(void)
267 return slab_state
>= UP
;
270 static inline struct kmem_cache_node
*get_node(struct kmem_cache
*s
, int node
)
273 return s
->node
[node
];
275 return &s
->local_node
;
279 static inline int check_valid_pointer(struct kmem_cache
*s
,
280 struct page
*page
, const void *object
)
287 base
= page_address(page
);
288 if (object
< base
|| object
>= base
+ s
->objects
* s
->size
||
289 (object
- base
) % s
->size
) {
297 * Slow version of get and set free pointer.
299 * This version requires touching the cache lines of kmem_cache which
300 * we avoid to do in the fast alloc free paths. There we obtain the offset
301 * from the page struct.
303 static inline void *get_freepointer(struct kmem_cache
*s
, void *object
)
305 return *(void **)(object
+ s
->offset
);
308 static inline void set_freepointer(struct kmem_cache
*s
, void *object
, void *fp
)
310 *(void **)(object
+ s
->offset
) = fp
;
313 /* Loop over all objects in a slab */
314 #define for_each_object(__p, __s, __addr) \
315 for (__p = (__addr); __p < (__addr) + (__s)->objects * (__s)->size;\
319 #define for_each_free_object(__p, __s, __free) \
320 for (__p = (__free); __p; __p = get_freepointer((__s), __p))
322 /* Determine object index from a given position */
323 static inline int slab_index(void *p
, struct kmem_cache
*s
, void *addr
)
325 return (p
- addr
) / s
->size
;
328 #ifdef CONFIG_SLUB_DEBUG
332 #ifdef CONFIG_SLUB_DEBUG_ON
333 static int slub_debug
= DEBUG_DEFAULT_FLAGS
;
335 static int slub_debug
;
338 static char *slub_debug_slabs
;
343 static void print_section(char *text
, u8
*addr
, unsigned int length
)
351 for (i
= 0; i
< length
; i
++) {
353 printk(KERN_ERR
"%8s 0x%p: ", text
, addr
+ i
);
356 printk(" %02x", addr
[i
]);
358 ascii
[offset
] = isgraph(addr
[i
]) ? addr
[i
] : '.';
360 printk(" %s\n",ascii
);
371 printk(" %s\n", ascii
);
375 static struct track
*get_track(struct kmem_cache
*s
, void *object
,
376 enum track_item alloc
)
381 p
= object
+ s
->offset
+ sizeof(void *);
383 p
= object
+ s
->inuse
;
388 static void set_track(struct kmem_cache
*s
, void *object
,
389 enum track_item alloc
, void *addr
)
394 p
= object
+ s
->offset
+ sizeof(void *);
396 p
= object
+ s
->inuse
;
401 p
->cpu
= smp_processor_id();
402 p
->pid
= current
? current
->pid
: -1;
405 memset(p
, 0, sizeof(struct track
));
408 static void init_tracking(struct kmem_cache
*s
, void *object
)
410 if (!(s
->flags
& SLAB_STORE_USER
))
413 set_track(s
, object
, TRACK_FREE
, NULL
);
414 set_track(s
, object
, TRACK_ALLOC
, NULL
);
417 static void print_track(const char *s
, struct track
*t
)
422 printk(KERN_ERR
"INFO: %s in ", s
);
423 __print_symbol("%s", (unsigned long)t
->addr
);
424 printk(" age=%lu cpu=%u pid=%d\n", jiffies
- t
->when
, t
->cpu
, t
->pid
);
427 static void print_tracking(struct kmem_cache
*s
, void *object
)
429 if (!(s
->flags
& SLAB_STORE_USER
))
432 print_track("Allocated", get_track(s
, object
, TRACK_ALLOC
));
433 print_track("Freed", get_track(s
, object
, TRACK_FREE
));
436 static void print_page_info(struct page
*page
)
438 printk(KERN_ERR
"INFO: Slab 0x%p used=%u fp=0x%p flags=0x%04lx\n",
439 page
, page
->inuse
, page
->freelist
, page
->flags
);
443 static void slab_bug(struct kmem_cache
*s
, char *fmt
, ...)
449 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
451 printk(KERN_ERR
"========================================"
452 "=====================================\n");
453 printk(KERN_ERR
"BUG %s: %s\n", s
->name
, buf
);
454 printk(KERN_ERR
"----------------------------------------"
455 "-------------------------------------\n\n");
458 static void slab_fix(struct kmem_cache
*s
, char *fmt
, ...)
464 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
466 printk(KERN_ERR
"FIX %s: %s\n", s
->name
, buf
);
469 static void print_trailer(struct kmem_cache
*s
, struct page
*page
, u8
*p
)
471 unsigned int off
; /* Offset of last byte */
472 u8
*addr
= page_address(page
);
474 print_tracking(s
, p
);
476 print_page_info(page
);
478 printk(KERN_ERR
"INFO: Object 0x%p @offset=%tu fp=0x%p\n\n",
479 p
, p
- addr
, get_freepointer(s
, p
));
482 print_section("Bytes b4", p
- 16, 16);
484 print_section("Object", p
, min(s
->objsize
, 128));
486 if (s
->flags
& SLAB_RED_ZONE
)
487 print_section("Redzone", p
+ s
->objsize
,
488 s
->inuse
- s
->objsize
);
491 off
= s
->offset
+ sizeof(void *);
495 if (s
->flags
& SLAB_STORE_USER
)
496 off
+= 2 * sizeof(struct track
);
499 /* Beginning of the filler is the free pointer */
500 print_section("Padding", p
+ off
, s
->size
- off
);
505 static void object_err(struct kmem_cache
*s
, struct page
*page
,
506 u8
*object
, char *reason
)
509 print_trailer(s
, page
, object
);
512 static void slab_err(struct kmem_cache
*s
, struct page
*page
, char *fmt
, ...)
518 vsnprintf(buf
, sizeof(buf
), fmt
, args
);
521 print_page_info(page
);
525 static void init_object(struct kmem_cache
*s
, void *object
, int active
)
529 if (s
->flags
& __OBJECT_POISON
) {
530 memset(p
, POISON_FREE
, s
->objsize
- 1);
531 p
[s
->objsize
-1] = POISON_END
;
534 if (s
->flags
& SLAB_RED_ZONE
)
535 memset(p
+ s
->objsize
,
536 active
? SLUB_RED_ACTIVE
: SLUB_RED_INACTIVE
,
537 s
->inuse
- s
->objsize
);
540 static u8
*check_bytes(u8
*start
, unsigned int value
, unsigned int bytes
)
543 if (*start
!= (u8
)value
)
551 static void restore_bytes(struct kmem_cache
*s
, char *message
, u8 data
,
552 void *from
, void *to
)
554 slab_fix(s
, "Restoring 0x%p-0x%p=0x%x\n", from
, to
- 1, data
);
555 memset(from
, data
, to
- from
);
558 static int check_bytes_and_report(struct kmem_cache
*s
, struct page
*page
,
559 u8
*object
, char *what
,
560 u8
* start
, unsigned int value
, unsigned int bytes
)
565 fault
= check_bytes(start
, value
, bytes
);
570 while (end
> fault
&& end
[-1] == value
)
573 slab_bug(s
, "%s overwritten", what
);
574 printk(KERN_ERR
"INFO: 0x%p-0x%p. First byte 0x%x instead of 0x%x\n",
575 fault
, end
- 1, fault
[0], value
);
576 print_trailer(s
, page
, object
);
578 restore_bytes(s
, what
, value
, fault
, end
);
586 * Bytes of the object to be managed.
587 * If the freepointer may overlay the object then the free
588 * pointer is the first word of the object.
590 * Poisoning uses 0x6b (POISON_FREE) and the last byte is
593 * object + s->objsize
594 * Padding to reach word boundary. This is also used for Redzoning.
595 * Padding is extended by another word if Redzoning is enabled and
598 * We fill with 0xbb (RED_INACTIVE) for inactive objects and with
599 * 0xcc (RED_ACTIVE) for objects in use.
602 * Meta data starts here.
604 * A. Free pointer (if we cannot overwrite object on free)
605 * B. Tracking data for SLAB_STORE_USER
606 * C. Padding to reach required alignment boundary or at mininum
607 * one word if debuggin is on to be able to detect writes
608 * before the word boundary.
610 * Padding is done using 0x5a (POISON_INUSE)
613 * Nothing is used beyond s->size.
615 * If slabcaches are merged then the objsize and inuse boundaries are mostly
616 * ignored. And therefore no slab options that rely on these boundaries
617 * may be used with merged slabcaches.
620 static int check_pad_bytes(struct kmem_cache
*s
, struct page
*page
, u8
*p
)
622 unsigned long off
= s
->inuse
; /* The end of info */
625 /* Freepointer is placed after the object. */
626 off
+= sizeof(void *);
628 if (s
->flags
& SLAB_STORE_USER
)
629 /* We also have user information there */
630 off
+= 2 * sizeof(struct track
);
635 return check_bytes_and_report(s
, page
, p
, "Object padding",
636 p
+ off
, POISON_INUSE
, s
->size
- off
);
639 static int slab_pad_check(struct kmem_cache
*s
, struct page
*page
)
647 if (!(s
->flags
& SLAB_POISON
))
650 start
= page_address(page
);
651 end
= start
+ (PAGE_SIZE
<< s
->order
);
652 length
= s
->objects
* s
->size
;
653 remainder
= end
- (start
+ length
);
657 fault
= check_bytes(start
+ length
, POISON_INUSE
, remainder
);
660 while (end
> fault
&& end
[-1] == POISON_INUSE
)
663 slab_err(s
, page
, "Padding overwritten. 0x%p-0x%p", fault
, end
- 1);
664 print_section("Padding", start
, length
);
666 restore_bytes(s
, "slab padding", POISON_INUSE
, start
, end
);
670 static int check_object(struct kmem_cache
*s
, struct page
*page
,
671 void *object
, int active
)
674 u8
*endobject
= object
+ s
->objsize
;
676 if (s
->flags
& SLAB_RED_ZONE
) {
678 active
? SLUB_RED_ACTIVE
: SLUB_RED_INACTIVE
;
680 if (!check_bytes_and_report(s
, page
, object
, "Redzone",
681 endobject
, red
, s
->inuse
- s
->objsize
))
684 if ((s
->flags
& SLAB_POISON
) && s
->objsize
< s
->inuse
)
685 check_bytes_and_report(s
, page
, p
, "Alignment padding", endobject
,
686 POISON_INUSE
, s
->inuse
- s
->objsize
);
689 if (s
->flags
& SLAB_POISON
) {
690 if (!active
&& (s
->flags
& __OBJECT_POISON
) &&
691 (!check_bytes_and_report(s
, page
, p
, "Poison", p
,
692 POISON_FREE
, s
->objsize
- 1) ||
693 !check_bytes_and_report(s
, page
, p
, "Poison",
694 p
+ s
->objsize
-1, POISON_END
, 1)))
697 * check_pad_bytes cleans up on its own.
699 check_pad_bytes(s
, page
, p
);
702 if (!s
->offset
&& active
)
704 * Object and freepointer overlap. Cannot check
705 * freepointer while object is allocated.
709 /* Check free pointer validity */
710 if (!check_valid_pointer(s
, page
, get_freepointer(s
, p
))) {
711 object_err(s
, page
, p
, "Freepointer corrupt");
713 * No choice but to zap it and thus loose the remainder
714 * of the free objects in this slab. May cause
715 * another error because the object count is now wrong.
717 set_freepointer(s
, p
, NULL
);
723 static int check_slab(struct kmem_cache
*s
, struct page
*page
)
725 VM_BUG_ON(!irqs_disabled());
727 if (!PageSlab(page
)) {
728 slab_err(s
, page
, "Not a valid slab page");
731 if (page
->offset
* sizeof(void *) != s
->offset
) {
732 slab_err(s
, page
, "Corrupted offset %lu",
733 (unsigned long)(page
->offset
* sizeof(void *)));
736 if (page
->inuse
> s
->objects
) {
737 slab_err(s
, page
, "inuse %u > max %u",
738 s
->name
, page
->inuse
, s
->objects
);
741 /* Slab_pad_check fixes things up after itself */
742 slab_pad_check(s
, page
);
747 * Determine if a certain object on a page is on the freelist. Must hold the
748 * slab lock to guarantee that the chains are in a consistent state.
750 static int on_freelist(struct kmem_cache
*s
, struct page
*page
, void *search
)
753 void *fp
= page
->freelist
;
756 while (fp
&& nr
<= s
->objects
) {
759 if (!check_valid_pointer(s
, page
, fp
)) {
761 object_err(s
, page
, object
,
762 "Freechain corrupt");
763 set_freepointer(s
, object
, NULL
);
766 slab_err(s
, page
, "Freepointer corrupt");
767 page
->freelist
= NULL
;
768 page
->inuse
= s
->objects
;
769 slab_fix(s
, "Freelist cleared");
775 fp
= get_freepointer(s
, object
);
779 if (page
->inuse
!= s
->objects
- nr
) {
780 slab_err(s
, page
, "Wrong object count. Counter is %d but "
781 "counted were %d", page
->inuse
, s
->objects
- nr
);
782 page
->inuse
= s
->objects
- nr
;
783 slab_fix(s
, "Object count adjusted.");
785 return search
== NULL
;
788 static void trace(struct kmem_cache
*s
, struct page
*page
, void *object
, int alloc
)
790 if (s
->flags
& SLAB_TRACE
) {
791 printk(KERN_INFO
"TRACE %s %s 0x%p inuse=%d fp=0x%p\n",
793 alloc
? "alloc" : "free",
798 print_section("Object", (void *)object
, s
->objsize
);
805 * Tracking of fully allocated slabs for debugging purposes.
807 static void add_full(struct kmem_cache_node
*n
, struct page
*page
)
809 spin_lock(&n
->list_lock
);
810 list_add(&page
->lru
, &n
->full
);
811 spin_unlock(&n
->list_lock
);
814 static void remove_full(struct kmem_cache
*s
, struct page
*page
)
816 struct kmem_cache_node
*n
;
818 if (!(s
->flags
& SLAB_STORE_USER
))
821 n
= get_node(s
, page_to_nid(page
));
823 spin_lock(&n
->list_lock
);
824 list_del(&page
->lru
);
825 spin_unlock(&n
->list_lock
);
828 static void setup_object_debug(struct kmem_cache
*s
, struct page
*page
,
831 if (!(s
->flags
& (SLAB_STORE_USER
|SLAB_RED_ZONE
|__OBJECT_POISON
)))
834 init_object(s
, object
, 0);
835 init_tracking(s
, object
);
838 static int alloc_debug_processing(struct kmem_cache
*s
, struct page
*page
,
839 void *object
, void *addr
)
841 if (!check_slab(s
, page
))
844 if (object
&& !on_freelist(s
, page
, object
)) {
845 object_err(s
, page
, object
, "Object already allocated");
849 if (!check_valid_pointer(s
, page
, object
)) {
850 object_err(s
, page
, object
, "Freelist Pointer check fails");
854 if (object
&& !check_object(s
, page
, object
, 0))
857 /* Success perform special debug activities for allocs */
858 if (s
->flags
& SLAB_STORE_USER
)
859 set_track(s
, object
, TRACK_ALLOC
, addr
);
860 trace(s
, page
, object
, 1);
861 init_object(s
, object
, 1);
865 if (PageSlab(page
)) {
867 * If this is a slab page then lets do the best we can
868 * to avoid issues in the future. Marking all objects
869 * as used avoids touching the remaining objects.
871 slab_fix(s
, "Marking all objects used");
872 page
->inuse
= s
->objects
;
873 page
->freelist
= NULL
;
874 /* Fix up fields that may be corrupted */
875 page
->offset
= s
->offset
/ sizeof(void *);
880 static int free_debug_processing(struct kmem_cache
*s
, struct page
*page
,
881 void *object
, void *addr
)
883 if (!check_slab(s
, page
))
886 if (!check_valid_pointer(s
, page
, object
)) {
887 slab_err(s
, page
, "Invalid object pointer 0x%p", object
);
891 if (on_freelist(s
, page
, object
)) {
892 object_err(s
, page
, object
, "Object already free");
896 if (!check_object(s
, page
, object
, 1))
899 if (unlikely(s
!= page
->slab
)) {
901 slab_err(s
, page
, "Attempt to free object(0x%p) "
902 "outside of slab", object
);
906 "SLUB <none>: no slab for object 0x%p.\n",
911 object_err(s
, page
, object
,
912 "page slab pointer corrupt.");
916 /* Special debug activities for freeing objects */
917 if (!SlabFrozen(page
) && !page
->freelist
)
918 remove_full(s
, page
);
919 if (s
->flags
& SLAB_STORE_USER
)
920 set_track(s
, object
, TRACK_FREE
, addr
);
921 trace(s
, page
, object
, 0);
922 init_object(s
, object
, 0);
926 slab_fix(s
, "Object at 0x%p not freed", object
);
930 static int __init
setup_slub_debug(char *str
)
932 slub_debug
= DEBUG_DEFAULT_FLAGS
;
933 if (*str
++ != '=' || !*str
)
935 * No options specified. Switch on full debugging.
941 * No options but restriction on slabs. This means full
942 * debugging for slabs matching a pattern.
949 * Switch off all debugging measures.
954 * Determine which debug features should be switched on
956 for ( ;*str
&& *str
!= ','; str
++) {
957 switch (tolower(*str
)) {
959 slub_debug
|= SLAB_DEBUG_FREE
;
962 slub_debug
|= SLAB_RED_ZONE
;
965 slub_debug
|= SLAB_POISON
;
968 slub_debug
|= SLAB_STORE_USER
;
971 slub_debug
|= SLAB_TRACE
;
974 printk(KERN_ERR
"slub_debug option '%c' "
975 "unknown. skipped\n",*str
);
981 slub_debug_slabs
= str
+ 1;
986 __setup("slub_debug", setup_slub_debug
);
988 static void kmem_cache_open_debug_check(struct kmem_cache
*s
)
991 * The page->offset field is only 16 bit wide. This is an offset
992 * in units of words from the beginning of an object. If the slab
993 * size is bigger then we cannot move the free pointer behind the
996 * On 32 bit platforms the limit is 256k. On 64bit platforms
999 * Debugging or ctor may create a need to move the free
1000 * pointer. Fail if this happens.
1002 if (s
->objsize
>= 65535 * sizeof(void *)) {
1003 BUG_ON(s
->flags
& (SLAB_RED_ZONE
| SLAB_POISON
|
1004 SLAB_STORE_USER
| SLAB_DESTROY_BY_RCU
));
1009 * Enable debugging if selected on the kernel commandline.
1011 if (slub_debug
&& (!slub_debug_slabs
||
1012 strncmp(slub_debug_slabs
, s
->name
,
1013 strlen(slub_debug_slabs
)) == 0))
1014 s
->flags
|= slub_debug
;
1017 static inline void setup_object_debug(struct kmem_cache
*s
,
1018 struct page
*page
, void *object
) {}
1020 static inline int alloc_debug_processing(struct kmem_cache
*s
,
1021 struct page
*page
, void *object
, void *addr
) { return 0; }
1023 static inline int free_debug_processing(struct kmem_cache
*s
,
1024 struct page
*page
, void *object
, void *addr
) { return 0; }
1026 static inline int slab_pad_check(struct kmem_cache
*s
, struct page
*page
)
1028 static inline int check_object(struct kmem_cache
*s
, struct page
*page
,
1029 void *object
, int active
) { return 1; }
1030 static inline void add_full(struct kmem_cache_node
*n
, struct page
*page
) {}
1031 static inline void kmem_cache_open_debug_check(struct kmem_cache
*s
) {}
1032 #define slub_debug 0
1035 * Slab allocation and freeing
1037 static struct page
*allocate_slab(struct kmem_cache
*s
, gfp_t flags
, int node
)
1040 int pages
= 1 << s
->order
;
1043 flags
|= __GFP_COMP
;
1045 if (s
->flags
& SLAB_CACHE_DMA
)
1049 page
= alloc_pages(flags
, s
->order
);
1051 page
= alloc_pages_node(node
, flags
, s
->order
);
1056 mod_zone_page_state(page_zone(page
),
1057 (s
->flags
& SLAB_RECLAIM_ACCOUNT
) ?
1058 NR_SLAB_RECLAIMABLE
: NR_SLAB_UNRECLAIMABLE
,
1064 static void setup_object(struct kmem_cache
*s
, struct page
*page
,
1067 setup_object_debug(s
, page
, object
);
1068 if (unlikely(s
->ctor
))
1069 s
->ctor(object
, s
, 0);
1072 static struct page
*new_slab(struct kmem_cache
*s
, gfp_t flags
, int node
)
1075 struct kmem_cache_node
*n
;
1081 BUG_ON(flags
& ~(GFP_DMA
| __GFP_ZERO
| GFP_LEVEL_MASK
));
1083 if (flags
& __GFP_WAIT
)
1086 page
= allocate_slab(s
, flags
& GFP_LEVEL_MASK
, node
);
1090 n
= get_node(s
, page_to_nid(page
));
1092 atomic_long_inc(&n
->nr_slabs
);
1093 page
->offset
= s
->offset
/ sizeof(void *);
1095 page
->flags
|= 1 << PG_slab
;
1096 if (s
->flags
& (SLAB_DEBUG_FREE
| SLAB_RED_ZONE
| SLAB_POISON
|
1097 SLAB_STORE_USER
| SLAB_TRACE
))
1100 start
= page_address(page
);
1101 end
= start
+ s
->objects
* s
->size
;
1103 if (unlikely(s
->flags
& SLAB_POISON
))
1104 memset(start
, POISON_INUSE
, PAGE_SIZE
<< s
->order
);
1107 for_each_object(p
, s
, start
) {
1108 setup_object(s
, page
, last
);
1109 set_freepointer(s
, last
, p
);
1112 setup_object(s
, page
, last
);
1113 set_freepointer(s
, last
, NULL
);
1115 page
->freelist
= start
;
1116 page
->lockless_freelist
= NULL
;
1119 if (flags
& __GFP_WAIT
)
1120 local_irq_disable();
1124 static void __free_slab(struct kmem_cache
*s
, struct page
*page
)
1126 int pages
= 1 << s
->order
;
1128 if (unlikely(SlabDebug(page
))) {
1131 slab_pad_check(s
, page
);
1132 for_each_object(p
, s
, page_address(page
))
1133 check_object(s
, page
, p
, 0);
1136 mod_zone_page_state(page_zone(page
),
1137 (s
->flags
& SLAB_RECLAIM_ACCOUNT
) ?
1138 NR_SLAB_RECLAIMABLE
: NR_SLAB_UNRECLAIMABLE
,
1141 page
->mapping
= NULL
;
1142 __free_pages(page
, s
->order
);
1145 static void rcu_free_slab(struct rcu_head
*h
)
1149 page
= container_of((struct list_head
*)h
, struct page
, lru
);
1150 __free_slab(page
->slab
, page
);
1153 static void free_slab(struct kmem_cache
*s
, struct page
*page
)
1155 if (unlikely(s
->flags
& SLAB_DESTROY_BY_RCU
)) {
1157 * RCU free overloads the RCU head over the LRU
1159 struct rcu_head
*head
= (void *)&page
->lru
;
1161 call_rcu(head
, rcu_free_slab
);
1163 __free_slab(s
, page
);
1166 static void discard_slab(struct kmem_cache
*s
, struct page
*page
)
1168 struct kmem_cache_node
*n
= get_node(s
, page_to_nid(page
));
1170 atomic_long_dec(&n
->nr_slabs
);
1171 reset_page_mapcount(page
);
1172 ClearSlabDebug(page
);
1173 __ClearPageSlab(page
);
1178 * Per slab locking using the pagelock
1180 static __always_inline
void slab_lock(struct page
*page
)
1182 bit_spin_lock(PG_locked
, &page
->flags
);
1185 static __always_inline
void slab_unlock(struct page
*page
)
1187 bit_spin_unlock(PG_locked
, &page
->flags
);
1190 static __always_inline
int slab_trylock(struct page
*page
)
1194 rc
= bit_spin_trylock(PG_locked
, &page
->flags
);
1199 * Management of partially allocated slabs
1201 static void add_partial_tail(struct kmem_cache_node
*n
, struct page
*page
)
1203 spin_lock(&n
->list_lock
);
1205 list_add_tail(&page
->lru
, &n
->partial
);
1206 spin_unlock(&n
->list_lock
);
1209 static void add_partial(struct kmem_cache_node
*n
, struct page
*page
)
1211 spin_lock(&n
->list_lock
);
1213 list_add(&page
->lru
, &n
->partial
);
1214 spin_unlock(&n
->list_lock
);
1217 static void remove_partial(struct kmem_cache
*s
,
1220 struct kmem_cache_node
*n
= get_node(s
, page_to_nid(page
));
1222 spin_lock(&n
->list_lock
);
1223 list_del(&page
->lru
);
1225 spin_unlock(&n
->list_lock
);
1229 * Lock slab and remove from the partial list.
1231 * Must hold list_lock.
1233 static inline int lock_and_freeze_slab(struct kmem_cache_node
*n
, struct page
*page
)
1235 if (slab_trylock(page
)) {
1236 list_del(&page
->lru
);
1238 SetSlabFrozen(page
);
1245 * Try to allocate a partial slab from a specific node.
1247 static struct page
*get_partial_node(struct kmem_cache_node
*n
)
1252 * Racy check. If we mistakenly see no partial slabs then we
1253 * just allocate an empty slab. If we mistakenly try to get a
1254 * partial slab and there is none available then get_partials()
1257 if (!n
|| !n
->nr_partial
)
1260 spin_lock(&n
->list_lock
);
1261 list_for_each_entry(page
, &n
->partial
, lru
)
1262 if (lock_and_freeze_slab(n
, page
))
1266 spin_unlock(&n
->list_lock
);
1271 * Get a page from somewhere. Search in increasing NUMA distances.
1273 static struct page
*get_any_partial(struct kmem_cache
*s
, gfp_t flags
)
1276 struct zonelist
*zonelist
;
1281 * The defrag ratio allows a configuration of the tradeoffs between
1282 * inter node defragmentation and node local allocations. A lower
1283 * defrag_ratio increases the tendency to do local allocations
1284 * instead of attempting to obtain partial slabs from other nodes.
1286 * If the defrag_ratio is set to 0 then kmalloc() always
1287 * returns node local objects. If the ratio is higher then kmalloc()
1288 * may return off node objects because partial slabs are obtained
1289 * from other nodes and filled up.
1291 * If /sys/slab/xx/defrag_ratio is set to 100 (which makes
1292 * defrag_ratio = 1000) then every (well almost) allocation will
1293 * first attempt to defrag slab caches on other nodes. This means
1294 * scanning over all nodes to look for partial slabs which may be
1295 * expensive if we do it every time we are trying to find a slab
1296 * with available objects.
1298 if (!s
->defrag_ratio
|| get_cycles() % 1024 > s
->defrag_ratio
)
1301 zonelist
= &NODE_DATA(slab_node(current
->mempolicy
))
1302 ->node_zonelists
[gfp_zone(flags
)];
1303 for (z
= zonelist
->zones
; *z
; z
++) {
1304 struct kmem_cache_node
*n
;
1306 n
= get_node(s
, zone_to_nid(*z
));
1308 if (n
&& cpuset_zone_allowed_hardwall(*z
, flags
) &&
1309 n
->nr_partial
> MIN_PARTIAL
) {
1310 page
= get_partial_node(n
);
1320 * Get a partial page, lock it and return it.
1322 static struct page
*get_partial(struct kmem_cache
*s
, gfp_t flags
, int node
)
1325 int searchnode
= (node
== -1) ? numa_node_id() : node
;
1327 page
= get_partial_node(get_node(s
, searchnode
));
1328 if (page
|| (flags
& __GFP_THISNODE
))
1331 return get_any_partial(s
, flags
);
1335 * Move a page back to the lists.
1337 * Must be called with the slab lock held.
1339 * On exit the slab lock will have been dropped.
1341 static void unfreeze_slab(struct kmem_cache
*s
, struct page
*page
)
1343 struct kmem_cache_node
*n
= get_node(s
, page_to_nid(page
));
1345 ClearSlabFrozen(page
);
1349 add_partial(n
, page
);
1350 else if (SlabDebug(page
) && (s
->flags
& SLAB_STORE_USER
))
1355 if (n
->nr_partial
< MIN_PARTIAL
) {
1357 * Adding an empty slab to the partial slabs in order
1358 * to avoid page allocator overhead. This slab needs
1359 * to come after the other slabs with objects in
1360 * order to fill them up. That way the size of the
1361 * partial list stays small. kmem_cache_shrink can
1362 * reclaim empty slabs from the partial list.
1364 add_partial_tail(n
, page
);
1368 discard_slab(s
, page
);
1374 * Remove the cpu slab
1376 static void deactivate_slab(struct kmem_cache
*s
, struct page
*page
, int cpu
)
1379 * Merge cpu freelist into freelist. Typically we get here
1380 * because both freelists are empty. So this is unlikely
1383 while (unlikely(page
->lockless_freelist
)) {
1386 /* Retrieve object from cpu_freelist */
1387 object
= page
->lockless_freelist
;
1388 page
->lockless_freelist
= page
->lockless_freelist
[page
->offset
];
1390 /* And put onto the regular freelist */
1391 object
[page
->offset
] = page
->freelist
;
1392 page
->freelist
= object
;
1395 s
->cpu_slab
[cpu
] = NULL
;
1396 unfreeze_slab(s
, page
);
1399 static inline void flush_slab(struct kmem_cache
*s
, struct page
*page
, int cpu
)
1402 deactivate_slab(s
, page
, cpu
);
1407 * Called from IPI handler with interrupts disabled.
1409 static inline void __flush_cpu_slab(struct kmem_cache
*s
, int cpu
)
1411 struct page
*page
= s
->cpu_slab
[cpu
];
1414 flush_slab(s
, page
, cpu
);
1417 static void flush_cpu_slab(void *d
)
1419 struct kmem_cache
*s
= d
;
1420 int cpu
= smp_processor_id();
1422 __flush_cpu_slab(s
, cpu
);
1425 static void flush_all(struct kmem_cache
*s
)
1428 on_each_cpu(flush_cpu_slab
, s
, 1, 1);
1430 unsigned long flags
;
1432 local_irq_save(flags
);
1434 local_irq_restore(flags
);
1439 * Slow path. The lockless freelist is empty or we need to perform
1442 * Interrupts are disabled.
1444 * Processing is still very fast if new objects have been freed to the
1445 * regular freelist. In that case we simply take over the regular freelist
1446 * as the lockless freelist and zap the regular freelist.
1448 * If that is not working then we fall back to the partial lists. We take the
1449 * first element of the freelist as the object to allocate now and move the
1450 * rest of the freelist to the lockless freelist.
1452 * And if we were unable to get a new slab from the partial slab lists then
1453 * we need to allocate a new slab. This is slowest path since we may sleep.
1455 static void *__slab_alloc(struct kmem_cache
*s
,
1456 gfp_t gfpflags
, int node
, void *addr
, struct page
*page
)
1459 int cpu
= smp_processor_id();
1465 if (unlikely(node
!= -1 && page_to_nid(page
) != node
))
1468 object
= page
->freelist
;
1469 if (unlikely(!object
))
1471 if (unlikely(SlabDebug(page
)))
1474 object
= page
->freelist
;
1475 page
->lockless_freelist
= object
[page
->offset
];
1476 page
->inuse
= s
->objects
;
1477 page
->freelist
= NULL
;
1482 deactivate_slab(s
, page
, cpu
);
1485 page
= get_partial(s
, gfpflags
, node
);
1487 s
->cpu_slab
[cpu
] = page
;
1491 page
= new_slab(s
, gfpflags
, node
);
1493 cpu
= smp_processor_id();
1494 if (s
->cpu_slab
[cpu
]) {
1496 * Someone else populated the cpu_slab while we
1497 * enabled interrupts, or we have gotten scheduled
1498 * on another cpu. The page may not be on the
1499 * requested node even if __GFP_THISNODE was
1500 * specified. So we need to recheck.
1503 page_to_nid(s
->cpu_slab
[cpu
]) == node
) {
1505 * Current cpuslab is acceptable and we
1506 * want the current one since its cache hot
1508 discard_slab(s
, page
);
1509 page
= s
->cpu_slab
[cpu
];
1513 /* New slab does not fit our expectations */
1514 flush_slab(s
, s
->cpu_slab
[cpu
], cpu
);
1517 SetSlabFrozen(page
);
1518 s
->cpu_slab
[cpu
] = page
;
1523 object
= page
->freelist
;
1524 if (!alloc_debug_processing(s
, page
, object
, addr
))
1528 page
->freelist
= object
[page
->offset
];
1534 * Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc)
1535 * have the fastpath folded into their functions. So no function call
1536 * overhead for requests that can be satisfied on the fastpath.
1538 * The fastpath works by first checking if the lockless freelist can be used.
1539 * If not then __slab_alloc is called for slow processing.
1541 * Otherwise we can simply pick the next object from the lockless free list.
1543 static void __always_inline
*slab_alloc(struct kmem_cache
*s
,
1544 gfp_t gfpflags
, int node
, void *addr
)
1548 unsigned long flags
;
1550 local_irq_save(flags
);
1551 page
= s
->cpu_slab
[smp_processor_id()];
1552 if (unlikely(!page
|| !page
->lockless_freelist
||
1553 (node
!= -1 && page_to_nid(page
) != node
)))
1555 object
= __slab_alloc(s
, gfpflags
, node
, addr
, page
);
1558 object
= page
->lockless_freelist
;
1559 page
->lockless_freelist
= object
[page
->offset
];
1561 local_irq_restore(flags
);
1563 if (unlikely((gfpflags
& __GFP_ZERO
) && object
))
1564 memset(object
, 0, s
->objsize
);
1569 void *kmem_cache_alloc(struct kmem_cache
*s
, gfp_t gfpflags
)
1571 return slab_alloc(s
, gfpflags
, -1, __builtin_return_address(0));
1573 EXPORT_SYMBOL(kmem_cache_alloc
);
1576 void *kmem_cache_alloc_node(struct kmem_cache
*s
, gfp_t gfpflags
, int node
)
1578 return slab_alloc(s
, gfpflags
, node
, __builtin_return_address(0));
1580 EXPORT_SYMBOL(kmem_cache_alloc_node
);
1584 * Slow patch handling. This may still be called frequently since objects
1585 * have a longer lifetime than the cpu slabs in most processing loads.
1587 * So we still attempt to reduce cache line usage. Just take the slab
1588 * lock and free the item. If there is no additional partial page
1589 * handling required then we can return immediately.
1591 static void __slab_free(struct kmem_cache
*s
, struct page
*page
,
1592 void *x
, void *addr
)
1595 void **object
= (void *)x
;
1599 if (unlikely(SlabDebug(page
)))
1602 prior
= object
[page
->offset
] = page
->freelist
;
1603 page
->freelist
= object
;
1606 if (unlikely(SlabFrozen(page
)))
1609 if (unlikely(!page
->inuse
))
1613 * Objects left in the slab. If it
1614 * was not on the partial list before
1617 if (unlikely(!prior
))
1618 add_partial(get_node(s
, page_to_nid(page
)), page
);
1627 * Slab still on the partial list.
1629 remove_partial(s
, page
);
1632 discard_slab(s
, page
);
1636 if (!free_debug_processing(s
, page
, x
, addr
))
1642 * Fastpath with forced inlining to produce a kfree and kmem_cache_free that
1643 * can perform fastpath freeing without additional function calls.
1645 * The fastpath is only possible if we are freeing to the current cpu slab
1646 * of this processor. This typically the case if we have just allocated
1649 * If fastpath is not possible then fall back to __slab_free where we deal
1650 * with all sorts of special processing.
1652 static void __always_inline
slab_free(struct kmem_cache
*s
,
1653 struct page
*page
, void *x
, void *addr
)
1655 void **object
= (void *)x
;
1656 unsigned long flags
;
1658 local_irq_save(flags
);
1659 if (likely(page
== s
->cpu_slab
[smp_processor_id()] &&
1660 !SlabDebug(page
))) {
1661 object
[page
->offset
] = page
->lockless_freelist
;
1662 page
->lockless_freelist
= object
;
1664 __slab_free(s
, page
, x
, addr
);
1666 local_irq_restore(flags
);
1669 void kmem_cache_free(struct kmem_cache
*s
, void *x
)
1673 page
= virt_to_head_page(x
);
1675 slab_free(s
, page
, x
, __builtin_return_address(0));
1677 EXPORT_SYMBOL(kmem_cache_free
);
1679 /* Figure out on which slab object the object resides */
1680 static struct page
*get_object_page(const void *x
)
1682 struct page
*page
= virt_to_head_page(x
);
1684 if (!PageSlab(page
))
1691 * Object placement in a slab is made very easy because we always start at
1692 * offset 0. If we tune the size of the object to the alignment then we can
1693 * get the required alignment by putting one properly sized object after
1696 * Notice that the allocation order determines the sizes of the per cpu
1697 * caches. Each processor has always one slab available for allocations.
1698 * Increasing the allocation order reduces the number of times that slabs
1699 * must be moved on and off the partial lists and is therefore a factor in
1704 * Mininum / Maximum order of slab pages. This influences locking overhead
1705 * and slab fragmentation. A higher order reduces the number of partial slabs
1706 * and increases the number of allocations possible without having to
1707 * take the list_lock.
1709 static int slub_min_order
;
1710 static int slub_max_order
= DEFAULT_MAX_ORDER
;
1711 static int slub_min_objects
= DEFAULT_MIN_OBJECTS
;
1714 * Merge control. If this is set then no merging of slab caches will occur.
1715 * (Could be removed. This was introduced to pacify the merge skeptics.)
1717 static int slub_nomerge
;
1720 * Calculate the order of allocation given an slab object size.
1722 * The order of allocation has significant impact on performance and other
1723 * system components. Generally order 0 allocations should be preferred since
1724 * order 0 does not cause fragmentation in the page allocator. Larger objects
1725 * be problematic to put into order 0 slabs because there may be too much
1726 * unused space left. We go to a higher order if more than 1/8th of the slab
1729 * In order to reach satisfactory performance we must ensure that a minimum
1730 * number of objects is in one slab. Otherwise we may generate too much
1731 * activity on the partial lists which requires taking the list_lock. This is
1732 * less a concern for large slabs though which are rarely used.
1734 * slub_max_order specifies the order where we begin to stop considering the
1735 * number of objects in a slab as critical. If we reach slub_max_order then
1736 * we try to keep the page order as low as possible. So we accept more waste
1737 * of space in favor of a small page order.
1739 * Higher order allocations also allow the placement of more objects in a
1740 * slab and thereby reduce object handling overhead. If the user has
1741 * requested a higher mininum order then we start with that one instead of
1742 * the smallest order which will fit the object.
1744 static inline int slab_order(int size
, int min_objects
,
1745 int max_order
, int fract_leftover
)
1749 int min_order
= slub_min_order
;
1752 * If we would create too many object per slab then reduce
1753 * the slab order even if it goes below slub_min_order.
1755 while (min_order
> 0 &&
1756 (PAGE_SIZE
<< min_order
) >= MAX_OBJECTS_PER_SLAB
* size
)
1759 for (order
= max(min_order
,
1760 fls(min_objects
* size
- 1) - PAGE_SHIFT
);
1761 order
<= max_order
; order
++) {
1763 unsigned long slab_size
= PAGE_SIZE
<< order
;
1765 if (slab_size
< min_objects
* size
)
1768 rem
= slab_size
% size
;
1770 if (rem
<= slab_size
/ fract_leftover
)
1773 /* If the next size is too high then exit now */
1774 if (slab_size
* 2 >= MAX_OBJECTS_PER_SLAB
* size
)
1781 static inline int calculate_order(int size
)
1788 * Attempt to find best configuration for a slab. This
1789 * works by first attempting to generate a layout with
1790 * the best configuration and backing off gradually.
1792 * First we reduce the acceptable waste in a slab. Then
1793 * we reduce the minimum objects required in a slab.
1795 min_objects
= slub_min_objects
;
1796 while (min_objects
> 1) {
1798 while (fraction
>= 4) {
1799 order
= slab_order(size
, min_objects
,
1800 slub_max_order
, fraction
);
1801 if (order
<= slub_max_order
)
1809 * We were unable to place multiple objects in a slab. Now
1810 * lets see if we can place a single object there.
1812 order
= slab_order(size
, 1, slub_max_order
, 1);
1813 if (order
<= slub_max_order
)
1817 * Doh this slab cannot be placed using slub_max_order.
1819 order
= slab_order(size
, 1, MAX_ORDER
, 1);
1820 if (order
<= MAX_ORDER
)
1826 * Figure out what the alignment of the objects will be.
1828 static unsigned long calculate_alignment(unsigned long flags
,
1829 unsigned long align
, unsigned long size
)
1832 * If the user wants hardware cache aligned objects then
1833 * follow that suggestion if the object is sufficiently
1836 * The hardware cache alignment cannot override the
1837 * specified alignment though. If that is greater
1840 if ((flags
& SLAB_HWCACHE_ALIGN
) &&
1841 size
> cache_line_size() / 2)
1842 return max_t(unsigned long, align
, cache_line_size());
1844 if (align
< ARCH_SLAB_MINALIGN
)
1845 return ARCH_SLAB_MINALIGN
;
1847 return ALIGN(align
, sizeof(void *));
1850 static void init_kmem_cache_node(struct kmem_cache_node
*n
)
1853 atomic_long_set(&n
->nr_slabs
, 0);
1854 spin_lock_init(&n
->list_lock
);
1855 INIT_LIST_HEAD(&n
->partial
);
1856 #ifdef CONFIG_SLUB_DEBUG
1857 INIT_LIST_HEAD(&n
->full
);
1863 * No kmalloc_node yet so do it by hand. We know that this is the first
1864 * slab on the node for this slabcache. There are no concurrent accesses
1867 * Note that this function only works on the kmalloc_node_cache
1868 * when allocating for the kmalloc_node_cache.
1870 static struct kmem_cache_node
* __init
early_kmem_cache_node_alloc(gfp_t gfpflags
,
1874 struct kmem_cache_node
*n
;
1876 BUG_ON(kmalloc_caches
->size
< sizeof(struct kmem_cache_node
));
1878 page
= new_slab(kmalloc_caches
, gfpflags
| GFP_THISNODE
, node
);
1883 page
->freelist
= get_freepointer(kmalloc_caches
, n
);
1885 kmalloc_caches
->node
[node
] = n
;
1886 #ifdef CONFIG_SLUB_DEBUG
1887 init_object(kmalloc_caches
, n
, 1);
1888 init_tracking(kmalloc_caches
, n
);
1890 init_kmem_cache_node(n
);
1891 atomic_long_inc(&n
->nr_slabs
);
1892 add_partial(n
, page
);
1895 * new_slab() disables interupts. If we do not reenable interrupts here
1896 * then bootup would continue with interrupts disabled.
1902 static void free_kmem_cache_nodes(struct kmem_cache
*s
)
1906 for_each_online_node(node
) {
1907 struct kmem_cache_node
*n
= s
->node
[node
];
1908 if (n
&& n
!= &s
->local_node
)
1909 kmem_cache_free(kmalloc_caches
, n
);
1910 s
->node
[node
] = NULL
;
1914 static int init_kmem_cache_nodes(struct kmem_cache
*s
, gfp_t gfpflags
)
1919 if (slab_state
>= UP
)
1920 local_node
= page_to_nid(virt_to_page(s
));
1924 for_each_online_node(node
) {
1925 struct kmem_cache_node
*n
;
1927 if (local_node
== node
)
1930 if (slab_state
== DOWN
) {
1931 n
= early_kmem_cache_node_alloc(gfpflags
,
1935 n
= kmem_cache_alloc_node(kmalloc_caches
,
1939 free_kmem_cache_nodes(s
);
1945 init_kmem_cache_node(n
);
1950 static void free_kmem_cache_nodes(struct kmem_cache
*s
)
1954 static int init_kmem_cache_nodes(struct kmem_cache
*s
, gfp_t gfpflags
)
1956 init_kmem_cache_node(&s
->local_node
);
1962 * calculate_sizes() determines the order and the distribution of data within
1965 static int calculate_sizes(struct kmem_cache
*s
)
1967 unsigned long flags
= s
->flags
;
1968 unsigned long size
= s
->objsize
;
1969 unsigned long align
= s
->align
;
1972 * Determine if we can poison the object itself. If the user of
1973 * the slab may touch the object after free or before allocation
1974 * then we should never poison the object itself.
1976 if ((flags
& SLAB_POISON
) && !(flags
& SLAB_DESTROY_BY_RCU
) &&
1978 s
->flags
|= __OBJECT_POISON
;
1980 s
->flags
&= ~__OBJECT_POISON
;
1983 * Round up object size to the next word boundary. We can only
1984 * place the free pointer at word boundaries and this determines
1985 * the possible location of the free pointer.
1987 size
= ALIGN(size
, sizeof(void *));
1989 #ifdef CONFIG_SLUB_DEBUG
1991 * If we are Redzoning then check if there is some space between the
1992 * end of the object and the free pointer. If not then add an
1993 * additional word to have some bytes to store Redzone information.
1995 if ((flags
& SLAB_RED_ZONE
) && size
== s
->objsize
)
1996 size
+= sizeof(void *);
2000 * With that we have determined the number of bytes in actual use
2001 * by the object. This is the potential offset to the free pointer.
2005 if (((flags
& (SLAB_DESTROY_BY_RCU
| SLAB_POISON
)) ||
2008 * Relocate free pointer after the object if it is not
2009 * permitted to overwrite the first word of the object on
2012 * This is the case if we do RCU, have a constructor or
2013 * destructor or are poisoning the objects.
2016 size
+= sizeof(void *);
2019 #ifdef CONFIG_SLUB_DEBUG
2020 if (flags
& SLAB_STORE_USER
)
2022 * Need to store information about allocs and frees after
2025 size
+= 2 * sizeof(struct track
);
2027 if (flags
& SLAB_RED_ZONE
)
2029 * Add some empty padding so that we can catch
2030 * overwrites from earlier objects rather than let
2031 * tracking information or the free pointer be
2032 * corrupted if an user writes before the start
2035 size
+= sizeof(void *);
2039 * Determine the alignment based on various parameters that the
2040 * user specified and the dynamic determination of cache line size
2043 align
= calculate_alignment(flags
, align
, s
->objsize
);
2046 * SLUB stores one object immediately after another beginning from
2047 * offset 0. In order to align the objects we have to simply size
2048 * each object to conform to the alignment.
2050 size
= ALIGN(size
, align
);
2053 s
->order
= calculate_order(size
);
2058 * Determine the number of objects per slab
2060 s
->objects
= (PAGE_SIZE
<< s
->order
) / size
;
2063 * Verify that the number of objects is within permitted limits.
2064 * The page->inuse field is only 16 bit wide! So we cannot have
2065 * more than 64k objects per slab.
2067 if (!s
->objects
|| s
->objects
> MAX_OBJECTS_PER_SLAB
)
2073 static int kmem_cache_open(struct kmem_cache
*s
, gfp_t gfpflags
,
2074 const char *name
, size_t size
,
2075 size_t align
, unsigned long flags
,
2076 void (*ctor
)(void *, struct kmem_cache
*, unsigned long))
2078 memset(s
, 0, kmem_size
);
2084 kmem_cache_open_debug_check(s
);
2086 if (!calculate_sizes(s
))
2091 s
->defrag_ratio
= 100;
2094 if (init_kmem_cache_nodes(s
, gfpflags
& ~SLUB_DMA
))
2097 if (flags
& SLAB_PANIC
)
2098 panic("Cannot create slab %s size=%lu realsize=%u "
2099 "order=%u offset=%u flags=%lx\n",
2100 s
->name
, (unsigned long)size
, s
->size
, s
->order
,
2106 * Check if a given pointer is valid
2108 int kmem_ptr_validate(struct kmem_cache
*s
, const void *object
)
2112 page
= get_object_page(object
);
2114 if (!page
|| s
!= page
->slab
)
2115 /* No slab or wrong slab */
2118 if (!check_valid_pointer(s
, page
, object
))
2122 * We could also check if the object is on the slabs freelist.
2123 * But this would be too expensive and it seems that the main
2124 * purpose of kmem_ptr_valid is to check if the object belongs
2125 * to a certain slab.
2129 EXPORT_SYMBOL(kmem_ptr_validate
);
2132 * Determine the size of a slab object
2134 unsigned int kmem_cache_size(struct kmem_cache
*s
)
2138 EXPORT_SYMBOL(kmem_cache_size
);
2140 const char *kmem_cache_name(struct kmem_cache
*s
)
2144 EXPORT_SYMBOL(kmem_cache_name
);
2147 * Attempt to free all slabs on a node. Return the number of slabs we
2148 * were unable to free.
2150 static int free_list(struct kmem_cache
*s
, struct kmem_cache_node
*n
,
2151 struct list_head
*list
)
2153 int slabs_inuse
= 0;
2154 unsigned long flags
;
2155 struct page
*page
, *h
;
2157 spin_lock_irqsave(&n
->list_lock
, flags
);
2158 list_for_each_entry_safe(page
, h
, list
, lru
)
2160 list_del(&page
->lru
);
2161 discard_slab(s
, page
);
2164 spin_unlock_irqrestore(&n
->list_lock
, flags
);
2169 * Release all resources used by a slab cache.
2171 static inline int kmem_cache_close(struct kmem_cache
*s
)
2177 /* Attempt to free all objects */
2178 for_each_online_node(node
) {
2179 struct kmem_cache_node
*n
= get_node(s
, node
);
2181 n
->nr_partial
-= free_list(s
, n
, &n
->partial
);
2182 if (atomic_long_read(&n
->nr_slabs
))
2185 free_kmem_cache_nodes(s
);
2190 * Close a cache and release the kmem_cache structure
2191 * (must be used for caches created using kmem_cache_create)
2193 void kmem_cache_destroy(struct kmem_cache
*s
)
2195 down_write(&slub_lock
);
2199 up_write(&slub_lock
);
2200 if (kmem_cache_close(s
))
2202 sysfs_slab_remove(s
);
2205 up_write(&slub_lock
);
2207 EXPORT_SYMBOL(kmem_cache_destroy
);
2209 /********************************************************************
2211 *******************************************************************/
2213 struct kmem_cache kmalloc_caches
[KMALLOC_SHIFT_HIGH
+ 1] __cacheline_aligned
;
2214 EXPORT_SYMBOL(kmalloc_caches
);
2216 #ifdef CONFIG_ZONE_DMA
2217 static struct kmem_cache
*kmalloc_caches_dma
[KMALLOC_SHIFT_HIGH
+ 1];
2220 static int __init
setup_slub_min_order(char *str
)
2222 get_option (&str
, &slub_min_order
);
2227 __setup("slub_min_order=", setup_slub_min_order
);
2229 static int __init
setup_slub_max_order(char *str
)
2231 get_option (&str
, &slub_max_order
);
2236 __setup("slub_max_order=", setup_slub_max_order
);
2238 static int __init
setup_slub_min_objects(char *str
)
2240 get_option (&str
, &slub_min_objects
);
2245 __setup("slub_min_objects=", setup_slub_min_objects
);
2247 static int __init
setup_slub_nomerge(char *str
)
2253 __setup("slub_nomerge", setup_slub_nomerge
);
2255 static struct kmem_cache
*create_kmalloc_cache(struct kmem_cache
*s
,
2256 const char *name
, int size
, gfp_t gfp_flags
)
2258 unsigned int flags
= 0;
2260 if (gfp_flags
& SLUB_DMA
)
2261 flags
= SLAB_CACHE_DMA
;
2263 down_write(&slub_lock
);
2264 if (!kmem_cache_open(s
, gfp_flags
, name
, size
, ARCH_KMALLOC_MINALIGN
,
2268 list_add(&s
->list
, &slab_caches
);
2269 up_write(&slub_lock
);
2270 if (sysfs_slab_add(s
))
2275 panic("Creation of kmalloc slab %s size=%d failed.\n", name
, size
);
2278 #ifdef CONFIG_ZONE_DMA
2279 static noinline
struct kmem_cache
*dma_kmalloc_cache(int index
, gfp_t flags
)
2281 struct kmem_cache
*s
;
2282 struct kmem_cache
*x
;
2286 s
= kmalloc_caches_dma
[index
];
2290 /* Dynamically create dma cache */
2291 x
= kmalloc(kmem_size
, flags
& ~SLUB_DMA
);
2293 panic("Unable to allocate memory for dma cache\n");
2295 realsize
= kmalloc_caches
[index
].objsize
;
2296 text
= kasprintf(flags
& ~SLUB_DMA
, "kmalloc_dma-%d",
2297 (unsigned int)realsize
);
2298 s
= create_kmalloc_cache(x
, text
, realsize
, flags
);
2299 down_write(&slub_lock
);
2300 if (!kmalloc_caches_dma
[index
]) {
2301 kmalloc_caches_dma
[index
] = s
;
2302 up_write(&slub_lock
);
2305 up_write(&slub_lock
);
2306 kmem_cache_destroy(s
);
2307 return kmalloc_caches_dma
[index
];
2312 * Conversion table for small slabs sizes / 8 to the index in the
2313 * kmalloc array. This is necessary for slabs < 192 since we have non power
2314 * of two cache sizes there. The size of larger slabs can be determined using
2317 static s8 size_index
[24] = {
2344 static struct kmem_cache
*get_slab(size_t size
, gfp_t flags
)
2350 return ZERO_SIZE_PTR
;
2352 index
= size_index
[(size
- 1) / 8];
2354 if (size
> KMALLOC_MAX_SIZE
)
2357 index
= fls(size
- 1);
2360 #ifdef CONFIG_ZONE_DMA
2361 if (unlikely((flags
& SLUB_DMA
)))
2362 return dma_kmalloc_cache(index
, flags
);
2365 return &kmalloc_caches
[index
];
2368 void *__kmalloc(size_t size
, gfp_t flags
)
2370 struct kmem_cache
*s
= get_slab(size
, flags
);
2372 if (ZERO_OR_NULL_PTR(s
))
2375 return slab_alloc(s
, flags
, -1, __builtin_return_address(0));
2377 EXPORT_SYMBOL(__kmalloc
);
2380 void *__kmalloc_node(size_t size
, gfp_t flags
, int node
)
2382 struct kmem_cache
*s
= get_slab(size
, flags
);
2384 if (ZERO_OR_NULL_PTR(s
))
2387 return slab_alloc(s
, flags
, node
, __builtin_return_address(0));
2389 EXPORT_SYMBOL(__kmalloc_node
);
2392 size_t ksize(const void *object
)
2395 struct kmem_cache
*s
;
2397 if (ZERO_OR_NULL_PTR(object
))
2400 page
= get_object_page(object
);
2406 * Debugging requires use of the padding between object
2407 * and whatever may come after it.
2409 if (s
->flags
& (SLAB_RED_ZONE
| SLAB_POISON
))
2413 * If we have the need to store the freelist pointer
2414 * back there or track user information then we can
2415 * only use the space before that information.
2417 if (s
->flags
& (SLAB_DESTROY_BY_RCU
| SLAB_STORE_USER
))
2421 * Else we can use all the padding etc for the allocation
2425 EXPORT_SYMBOL(ksize
);
2427 void kfree(const void *x
)
2429 struct kmem_cache
*s
;
2433 * This has to be an unsigned comparison. According to Linus
2434 * some gcc version treat a pointer as a signed entity. Then
2435 * this comparison would be true for all "negative" pointers
2436 * (which would cover the whole upper half of the address space).
2438 if (ZERO_OR_NULL_PTR(x
))
2441 page
= virt_to_head_page(x
);
2444 slab_free(s
, page
, (void *)x
, __builtin_return_address(0));
2446 EXPORT_SYMBOL(kfree
);
2449 * kmem_cache_shrink removes empty slabs from the partial lists and sorts
2450 * the remaining slabs by the number of items in use. The slabs with the
2451 * most items in use come first. New allocations will then fill those up
2452 * and thus they can be removed from the partial lists.
2454 * The slabs with the least items are placed last. This results in them
2455 * being allocated from last increasing the chance that the last objects
2456 * are freed in them.
2458 int kmem_cache_shrink(struct kmem_cache
*s
)
2462 struct kmem_cache_node
*n
;
2465 struct list_head
*slabs_by_inuse
=
2466 kmalloc(sizeof(struct list_head
) * s
->objects
, GFP_KERNEL
);
2467 unsigned long flags
;
2469 if (!slabs_by_inuse
)
2473 for_each_online_node(node
) {
2474 n
= get_node(s
, node
);
2479 for (i
= 0; i
< s
->objects
; i
++)
2480 INIT_LIST_HEAD(slabs_by_inuse
+ i
);
2482 spin_lock_irqsave(&n
->list_lock
, flags
);
2485 * Build lists indexed by the items in use in each slab.
2487 * Note that concurrent frees may occur while we hold the
2488 * list_lock. page->inuse here is the upper limit.
2490 list_for_each_entry_safe(page
, t
, &n
->partial
, lru
) {
2491 if (!page
->inuse
&& slab_trylock(page
)) {
2493 * Must hold slab lock here because slab_free
2494 * may have freed the last object and be
2495 * waiting to release the slab.
2497 list_del(&page
->lru
);
2500 discard_slab(s
, page
);
2502 if (n
->nr_partial
> MAX_PARTIAL
)
2503 list_move(&page
->lru
,
2504 slabs_by_inuse
+ page
->inuse
);
2508 if (n
->nr_partial
<= MAX_PARTIAL
)
2512 * Rebuild the partial list with the slabs filled up most
2513 * first and the least used slabs at the end.
2515 for (i
= s
->objects
- 1; i
>= 0; i
--)
2516 list_splice(slabs_by_inuse
+ i
, n
->partial
.prev
);
2519 spin_unlock_irqrestore(&n
->list_lock
, flags
);
2522 kfree(slabs_by_inuse
);
2525 EXPORT_SYMBOL(kmem_cache_shrink
);
2527 /********************************************************************
2528 * Basic setup of slabs
2529 *******************************************************************/
2531 void __init
kmem_cache_init(void)
2538 * Must first have the slab cache available for the allocations of the
2539 * struct kmem_cache_node's. There is special bootstrap code in
2540 * kmem_cache_open for slab_state == DOWN.
2542 create_kmalloc_cache(&kmalloc_caches
[0], "kmem_cache_node",
2543 sizeof(struct kmem_cache_node
), GFP_KERNEL
);
2544 kmalloc_caches
[0].refcount
= -1;
2548 /* Able to allocate the per node structures */
2549 slab_state
= PARTIAL
;
2551 /* Caches that are not of the two-to-the-power-of size */
2552 if (KMALLOC_MIN_SIZE
<= 64) {
2553 create_kmalloc_cache(&kmalloc_caches
[1],
2554 "kmalloc-96", 96, GFP_KERNEL
);
2557 if (KMALLOC_MIN_SIZE
<= 128) {
2558 create_kmalloc_cache(&kmalloc_caches
[2],
2559 "kmalloc-192", 192, GFP_KERNEL
);
2563 for (i
= KMALLOC_SHIFT_LOW
; i
<= KMALLOC_SHIFT_HIGH
; i
++) {
2564 create_kmalloc_cache(&kmalloc_caches
[i
],
2565 "kmalloc", 1 << i
, GFP_KERNEL
);
2571 * Patch up the size_index table if we have strange large alignment
2572 * requirements for the kmalloc array. This is only the case for
2573 * mips it seems. The standard arches will not generate any code here.
2575 * Largest permitted alignment is 256 bytes due to the way we
2576 * handle the index determination for the smaller caches.
2578 * Make sure that nothing crazy happens if someone starts tinkering
2579 * around with ARCH_KMALLOC_MINALIGN
2581 BUILD_BUG_ON(KMALLOC_MIN_SIZE
> 256 ||
2582 (KMALLOC_MIN_SIZE
& (KMALLOC_MIN_SIZE
- 1)));
2584 for (i
= 8; i
< KMALLOC_MIN_SIZE
; i
+= 8)
2585 size_index
[(i
- 1) / 8] = KMALLOC_SHIFT_LOW
;
2589 /* Provide the correct kmalloc names now that the caches are up */
2590 for (i
= KMALLOC_SHIFT_LOW
; i
<= KMALLOC_SHIFT_HIGH
; i
++)
2591 kmalloc_caches
[i
]. name
=
2592 kasprintf(GFP_KERNEL
, "kmalloc-%d", 1 << i
);
2595 register_cpu_notifier(&slab_notifier
);
2598 kmem_size
= offsetof(struct kmem_cache
, cpu_slab
) +
2599 nr_cpu_ids
* sizeof(struct page
*);
2601 printk(KERN_INFO
"SLUB: Genslabs=%d, HWalign=%d, Order=%d-%d, MinObjects=%d,"
2602 " CPUs=%d, Nodes=%d\n",
2603 caches
, cache_line_size(),
2604 slub_min_order
, slub_max_order
, slub_min_objects
,
2605 nr_cpu_ids
, nr_node_ids
);
2609 * Find a mergeable slab cache
2611 static int slab_unmergeable(struct kmem_cache
*s
)
2613 if (slub_nomerge
|| (s
->flags
& SLUB_NEVER_MERGE
))
2620 * We may have set a slab to be unmergeable during bootstrap.
2622 if (s
->refcount
< 0)
2628 static struct kmem_cache
*find_mergeable(size_t size
,
2629 size_t align
, unsigned long flags
,
2630 void (*ctor
)(void *, struct kmem_cache
*, unsigned long))
2632 struct kmem_cache
*s
;
2634 if (slub_nomerge
|| (flags
& SLUB_NEVER_MERGE
))
2640 size
= ALIGN(size
, sizeof(void *));
2641 align
= calculate_alignment(flags
, align
, size
);
2642 size
= ALIGN(size
, align
);
2644 list_for_each_entry(s
, &slab_caches
, list
) {
2645 if (slab_unmergeable(s
))
2651 if (((flags
| slub_debug
) & SLUB_MERGE_SAME
) !=
2652 (s
->flags
& SLUB_MERGE_SAME
))
2655 * Check if alignment is compatible.
2656 * Courtesy of Adrian Drzewiecki
2658 if ((s
->size
& ~(align
-1)) != s
->size
)
2661 if (s
->size
- size
>= sizeof(void *))
2669 struct kmem_cache
*kmem_cache_create(const char *name
, size_t size
,
2670 size_t align
, unsigned long flags
,
2671 void (*ctor
)(void *, struct kmem_cache
*, unsigned long))
2673 struct kmem_cache
*s
;
2675 down_write(&slub_lock
);
2676 s
= find_mergeable(size
, align
, flags
, ctor
);
2680 * Adjust the object sizes so that we clear
2681 * the complete object on kzalloc.
2683 s
->objsize
= max(s
->objsize
, (int)size
);
2684 s
->inuse
= max_t(int, s
->inuse
, ALIGN(size
, sizeof(void *)));
2685 up_write(&slub_lock
);
2686 if (sysfs_slab_alias(s
, name
))
2690 s
= kmalloc(kmem_size
, GFP_KERNEL
);
2692 if (kmem_cache_open(s
, GFP_KERNEL
, name
,
2693 size
, align
, flags
, ctor
)) {
2694 list_add(&s
->list
, &slab_caches
);
2695 up_write(&slub_lock
);
2696 if (sysfs_slab_add(s
))
2702 up_write(&slub_lock
);
2705 if (flags
& SLAB_PANIC
)
2706 panic("Cannot create slabcache %s\n", name
);
2711 EXPORT_SYMBOL(kmem_cache_create
);
2715 * Use the cpu notifier to insure that the cpu slabs are flushed when
2718 static int __cpuinit
slab_cpuup_callback(struct notifier_block
*nfb
,
2719 unsigned long action
, void *hcpu
)
2721 long cpu
= (long)hcpu
;
2722 struct kmem_cache
*s
;
2723 unsigned long flags
;
2726 case CPU_UP_CANCELED
:
2727 case CPU_UP_CANCELED_FROZEN
:
2729 case CPU_DEAD_FROZEN
:
2730 down_read(&slub_lock
);
2731 list_for_each_entry(s
, &slab_caches
, list
) {
2732 local_irq_save(flags
);
2733 __flush_cpu_slab(s
, cpu
);
2734 local_irq_restore(flags
);
2736 up_read(&slub_lock
);
2744 static struct notifier_block __cpuinitdata slab_notifier
=
2745 { &slab_cpuup_callback
, NULL
, 0 };
2749 void *__kmalloc_track_caller(size_t size
, gfp_t gfpflags
, void *caller
)
2751 struct kmem_cache
*s
= get_slab(size
, gfpflags
);
2753 if (ZERO_OR_NULL_PTR(s
))
2756 return slab_alloc(s
, gfpflags
, -1, caller
);
2759 void *__kmalloc_node_track_caller(size_t size
, gfp_t gfpflags
,
2760 int node
, void *caller
)
2762 struct kmem_cache
*s
= get_slab(size
, gfpflags
);
2764 if (ZERO_OR_NULL_PTR(s
))
2767 return slab_alloc(s
, gfpflags
, node
, caller
);
2770 #if defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)
2771 static int validate_slab(struct kmem_cache
*s
, struct page
*page
,
2775 void *addr
= page_address(page
);
2777 if (!check_slab(s
, page
) ||
2778 !on_freelist(s
, page
, NULL
))
2781 /* Now we know that a valid freelist exists */
2782 bitmap_zero(map
, s
->objects
);
2784 for_each_free_object(p
, s
, page
->freelist
) {
2785 set_bit(slab_index(p
, s
, addr
), map
);
2786 if (!check_object(s
, page
, p
, 0))
2790 for_each_object(p
, s
, addr
)
2791 if (!test_bit(slab_index(p
, s
, addr
), map
))
2792 if (!check_object(s
, page
, p
, 1))
2797 static void validate_slab_slab(struct kmem_cache
*s
, struct page
*page
,
2800 if (slab_trylock(page
)) {
2801 validate_slab(s
, page
, map
);
2804 printk(KERN_INFO
"SLUB %s: Skipped busy slab 0x%p\n",
2807 if (s
->flags
& DEBUG_DEFAULT_FLAGS
) {
2808 if (!SlabDebug(page
))
2809 printk(KERN_ERR
"SLUB %s: SlabDebug not set "
2810 "on slab 0x%p\n", s
->name
, page
);
2812 if (SlabDebug(page
))
2813 printk(KERN_ERR
"SLUB %s: SlabDebug set on "
2814 "slab 0x%p\n", s
->name
, page
);
2818 static int validate_slab_node(struct kmem_cache
*s
,
2819 struct kmem_cache_node
*n
, unsigned long *map
)
2821 unsigned long count
= 0;
2823 unsigned long flags
;
2825 spin_lock_irqsave(&n
->list_lock
, flags
);
2827 list_for_each_entry(page
, &n
->partial
, lru
) {
2828 validate_slab_slab(s
, page
, map
);
2831 if (count
!= n
->nr_partial
)
2832 printk(KERN_ERR
"SLUB %s: %ld partial slabs counted but "
2833 "counter=%ld\n", s
->name
, count
, n
->nr_partial
);
2835 if (!(s
->flags
& SLAB_STORE_USER
))
2838 list_for_each_entry(page
, &n
->full
, lru
) {
2839 validate_slab_slab(s
, page
, map
);
2842 if (count
!= atomic_long_read(&n
->nr_slabs
))
2843 printk(KERN_ERR
"SLUB: %s %ld slabs counted but "
2844 "counter=%ld\n", s
->name
, count
,
2845 atomic_long_read(&n
->nr_slabs
));
2848 spin_unlock_irqrestore(&n
->list_lock
, flags
);
2852 static long validate_slab_cache(struct kmem_cache
*s
)
2855 unsigned long count
= 0;
2856 unsigned long *map
= kmalloc(BITS_TO_LONGS(s
->objects
) *
2857 sizeof(unsigned long), GFP_KERNEL
);
2863 for_each_online_node(node
) {
2864 struct kmem_cache_node
*n
= get_node(s
, node
);
2866 count
+= validate_slab_node(s
, n
, map
);
2872 #ifdef SLUB_RESILIENCY_TEST
2873 static void resiliency_test(void)
2877 printk(KERN_ERR
"SLUB resiliency testing\n");
2878 printk(KERN_ERR
"-----------------------\n");
2879 printk(KERN_ERR
"A. Corruption after allocation\n");
2881 p
= kzalloc(16, GFP_KERNEL
);
2883 printk(KERN_ERR
"\n1. kmalloc-16: Clobber Redzone/next pointer"
2884 " 0x12->0x%p\n\n", p
+ 16);
2886 validate_slab_cache(kmalloc_caches
+ 4);
2888 /* Hmmm... The next two are dangerous */
2889 p
= kzalloc(32, GFP_KERNEL
);
2890 p
[32 + sizeof(void *)] = 0x34;
2891 printk(KERN_ERR
"\n2. kmalloc-32: Clobber next pointer/next slab"
2892 " 0x34 -> -0x%p\n", p
);
2893 printk(KERN_ERR
"If allocated object is overwritten then not detectable\n\n");
2895 validate_slab_cache(kmalloc_caches
+ 5);
2896 p
= kzalloc(64, GFP_KERNEL
);
2897 p
+= 64 + (get_cycles() & 0xff) * sizeof(void *);
2899 printk(KERN_ERR
"\n3. kmalloc-64: corrupting random byte 0x56->0x%p\n",
2901 printk(KERN_ERR
"If allocated object is overwritten then not detectable\n\n");
2902 validate_slab_cache(kmalloc_caches
+ 6);
2904 printk(KERN_ERR
"\nB. Corruption after free\n");
2905 p
= kzalloc(128, GFP_KERNEL
);
2908 printk(KERN_ERR
"1. kmalloc-128: Clobber first word 0x78->0x%p\n\n", p
);
2909 validate_slab_cache(kmalloc_caches
+ 7);
2911 p
= kzalloc(256, GFP_KERNEL
);
2914 printk(KERN_ERR
"\n2. kmalloc-256: Clobber 50th byte 0x9a->0x%p\n\n", p
);
2915 validate_slab_cache(kmalloc_caches
+ 8);
2917 p
= kzalloc(512, GFP_KERNEL
);
2920 printk(KERN_ERR
"\n3. kmalloc-512: Clobber redzone 0xab->0x%p\n\n", p
);
2921 validate_slab_cache(kmalloc_caches
+ 9);
2924 static void resiliency_test(void) {};
2928 * Generate lists of code addresses where slabcache objects are allocated
2933 unsigned long count
;
2946 unsigned long count
;
2947 struct location
*loc
;
2950 static void free_loc_track(struct loc_track
*t
)
2953 free_pages((unsigned long)t
->loc
,
2954 get_order(sizeof(struct location
) * t
->max
));
2957 static int alloc_loc_track(struct loc_track
*t
, unsigned long max
, gfp_t flags
)
2962 order
= get_order(sizeof(struct location
) * max
);
2964 l
= (void *)__get_free_pages(flags
, order
);
2969 memcpy(l
, t
->loc
, sizeof(struct location
) * t
->count
);
2977 static int add_location(struct loc_track
*t
, struct kmem_cache
*s
,
2978 const struct track
*track
)
2980 long start
, end
, pos
;
2983 unsigned long age
= jiffies
- track
->when
;
2989 pos
= start
+ (end
- start
+ 1) / 2;
2992 * There is nothing at "end". If we end up there
2993 * we need to add something to before end.
2998 caddr
= t
->loc
[pos
].addr
;
2999 if (track
->addr
== caddr
) {
3005 if (age
< l
->min_time
)
3007 if (age
> l
->max_time
)
3010 if (track
->pid
< l
->min_pid
)
3011 l
->min_pid
= track
->pid
;
3012 if (track
->pid
> l
->max_pid
)
3013 l
->max_pid
= track
->pid
;
3015 cpu_set(track
->cpu
, l
->cpus
);
3017 node_set(page_to_nid(virt_to_page(track
)), l
->nodes
);
3021 if (track
->addr
< caddr
)
3028 * Not found. Insert new tracking element.
3030 if (t
->count
>= t
->max
&& !alloc_loc_track(t
, 2 * t
->max
, GFP_ATOMIC
))
3036 (t
->count
- pos
) * sizeof(struct location
));
3039 l
->addr
= track
->addr
;
3043 l
->min_pid
= track
->pid
;
3044 l
->max_pid
= track
->pid
;
3045 cpus_clear(l
->cpus
);
3046 cpu_set(track
->cpu
, l
->cpus
);
3047 nodes_clear(l
->nodes
);
3048 node_set(page_to_nid(virt_to_page(track
)), l
->nodes
);
3052 static void process_slab(struct loc_track
*t
, struct kmem_cache
*s
,
3053 struct page
*page
, enum track_item alloc
)
3055 void *addr
= page_address(page
);
3056 DECLARE_BITMAP(map
, s
->objects
);
3059 bitmap_zero(map
, s
->objects
);
3060 for_each_free_object(p
, s
, page
->freelist
)
3061 set_bit(slab_index(p
, s
, addr
), map
);
3063 for_each_object(p
, s
, addr
)
3064 if (!test_bit(slab_index(p
, s
, addr
), map
))
3065 add_location(t
, s
, get_track(s
, p
, alloc
));
3068 static int list_locations(struct kmem_cache
*s
, char *buf
,
3069 enum track_item alloc
)
3073 struct loc_track t
= { 0, 0, NULL
};
3076 if (!alloc_loc_track(&t
, PAGE_SIZE
/ sizeof(struct location
),
3078 return sprintf(buf
, "Out of memory\n");
3080 /* Push back cpu slabs */
3083 for_each_online_node(node
) {
3084 struct kmem_cache_node
*n
= get_node(s
, node
);
3085 unsigned long flags
;
3088 if (!atomic_read(&n
->nr_slabs
))
3091 spin_lock_irqsave(&n
->list_lock
, flags
);
3092 list_for_each_entry(page
, &n
->partial
, lru
)
3093 process_slab(&t
, s
, page
, alloc
);
3094 list_for_each_entry(page
, &n
->full
, lru
)
3095 process_slab(&t
, s
, page
, alloc
);
3096 spin_unlock_irqrestore(&n
->list_lock
, flags
);
3099 for (i
= 0; i
< t
.count
; i
++) {
3100 struct location
*l
= &t
.loc
[i
];
3102 if (n
> PAGE_SIZE
- 100)
3104 n
+= sprintf(buf
+ n
, "%7ld ", l
->count
);
3107 n
+= sprint_symbol(buf
+ n
, (unsigned long)l
->addr
);
3109 n
+= sprintf(buf
+ n
, "<not-available>");
3111 if (l
->sum_time
!= l
->min_time
) {
3112 unsigned long remainder
;
3114 n
+= sprintf(buf
+ n
, " age=%ld/%ld/%ld",
3116 div_long_long_rem(l
->sum_time
, l
->count
, &remainder
),
3119 n
+= sprintf(buf
+ n
, " age=%ld",
3122 if (l
->min_pid
!= l
->max_pid
)
3123 n
+= sprintf(buf
+ n
, " pid=%ld-%ld",
3124 l
->min_pid
, l
->max_pid
);
3126 n
+= sprintf(buf
+ n
, " pid=%ld",
3129 if (num_online_cpus() > 1 && !cpus_empty(l
->cpus
) &&
3130 n
< PAGE_SIZE
- 60) {
3131 n
+= sprintf(buf
+ n
, " cpus=");
3132 n
+= cpulist_scnprintf(buf
+ n
, PAGE_SIZE
- n
- 50,
3136 if (num_online_nodes() > 1 && !nodes_empty(l
->nodes
) &&
3137 n
< PAGE_SIZE
- 60) {
3138 n
+= sprintf(buf
+ n
, " nodes=");
3139 n
+= nodelist_scnprintf(buf
+ n
, PAGE_SIZE
- n
- 50,
3143 n
+= sprintf(buf
+ n
, "\n");
3148 n
+= sprintf(buf
, "No data\n");
3152 static unsigned long count_partial(struct kmem_cache_node
*n
)
3154 unsigned long flags
;
3155 unsigned long x
= 0;
3158 spin_lock_irqsave(&n
->list_lock
, flags
);
3159 list_for_each_entry(page
, &n
->partial
, lru
)
3161 spin_unlock_irqrestore(&n
->list_lock
, flags
);
3165 enum slab_stat_type
{
3172 #define SO_FULL (1 << SL_FULL)
3173 #define SO_PARTIAL (1 << SL_PARTIAL)
3174 #define SO_CPU (1 << SL_CPU)
3175 #define SO_OBJECTS (1 << SL_OBJECTS)
3177 static unsigned long slab_objects(struct kmem_cache
*s
,
3178 char *buf
, unsigned long flags
)
3180 unsigned long total
= 0;
3184 unsigned long *nodes
;
3185 unsigned long *per_cpu
;
3187 nodes
= kzalloc(2 * sizeof(unsigned long) * nr_node_ids
, GFP_KERNEL
);
3188 per_cpu
= nodes
+ nr_node_ids
;
3190 for_each_possible_cpu(cpu
) {
3191 struct page
*page
= s
->cpu_slab
[cpu
];
3195 node
= page_to_nid(page
);
3196 if (flags
& SO_CPU
) {
3199 if (flags
& SO_OBJECTS
)
3210 for_each_online_node(node
) {
3211 struct kmem_cache_node
*n
= get_node(s
, node
);
3213 if (flags
& SO_PARTIAL
) {
3214 if (flags
& SO_OBJECTS
)
3215 x
= count_partial(n
);
3222 if (flags
& SO_FULL
) {
3223 int full_slabs
= atomic_read(&n
->nr_slabs
)
3227 if (flags
& SO_OBJECTS
)
3228 x
= full_slabs
* s
->objects
;
3236 x
= sprintf(buf
, "%lu", total
);
3238 for_each_online_node(node
)
3240 x
+= sprintf(buf
+ x
, " N%d=%lu",
3244 return x
+ sprintf(buf
+ x
, "\n");
3247 static int any_slab_objects(struct kmem_cache
*s
)
3252 for_each_possible_cpu(cpu
)
3253 if (s
->cpu_slab
[cpu
])
3256 for_each_node(node
) {
3257 struct kmem_cache_node
*n
= get_node(s
, node
);
3259 if (n
->nr_partial
|| atomic_read(&n
->nr_slabs
))
3265 #define to_slab_attr(n) container_of(n, struct slab_attribute, attr)
3266 #define to_slab(n) container_of(n, struct kmem_cache, kobj);
3268 struct slab_attribute
{
3269 struct attribute attr
;
3270 ssize_t (*show
)(struct kmem_cache
*s
, char *buf
);
3271 ssize_t (*store
)(struct kmem_cache
*s
, const char *x
, size_t count
);
3274 #define SLAB_ATTR_RO(_name) \
3275 static struct slab_attribute _name##_attr = __ATTR_RO(_name)
3277 #define SLAB_ATTR(_name) \
3278 static struct slab_attribute _name##_attr = \
3279 __ATTR(_name, 0644, _name##_show, _name##_store)
3281 static ssize_t
slab_size_show(struct kmem_cache
*s
, char *buf
)
3283 return sprintf(buf
, "%d\n", s
->size
);
3285 SLAB_ATTR_RO(slab_size
);
3287 static ssize_t
align_show(struct kmem_cache
*s
, char *buf
)
3289 return sprintf(buf
, "%d\n", s
->align
);
3291 SLAB_ATTR_RO(align
);
3293 static ssize_t
object_size_show(struct kmem_cache
*s
, char *buf
)
3295 return sprintf(buf
, "%d\n", s
->objsize
);
3297 SLAB_ATTR_RO(object_size
);
3299 static ssize_t
objs_per_slab_show(struct kmem_cache
*s
, char *buf
)
3301 return sprintf(buf
, "%d\n", s
->objects
);
3303 SLAB_ATTR_RO(objs_per_slab
);
3305 static ssize_t
order_show(struct kmem_cache
*s
, char *buf
)
3307 return sprintf(buf
, "%d\n", s
->order
);
3309 SLAB_ATTR_RO(order
);
3311 static ssize_t
ctor_show(struct kmem_cache
*s
, char *buf
)
3314 int n
= sprint_symbol(buf
, (unsigned long)s
->ctor
);
3316 return n
+ sprintf(buf
+ n
, "\n");
3322 static ssize_t
aliases_show(struct kmem_cache
*s
, char *buf
)
3324 return sprintf(buf
, "%d\n", s
->refcount
- 1);
3326 SLAB_ATTR_RO(aliases
);
3328 static ssize_t
slabs_show(struct kmem_cache
*s
, char *buf
)
3330 return slab_objects(s
, buf
, SO_FULL
|SO_PARTIAL
|SO_CPU
);
3332 SLAB_ATTR_RO(slabs
);
3334 static ssize_t
partial_show(struct kmem_cache
*s
, char *buf
)
3336 return slab_objects(s
, buf
, SO_PARTIAL
);
3338 SLAB_ATTR_RO(partial
);
3340 static ssize_t
cpu_slabs_show(struct kmem_cache
*s
, char *buf
)
3342 return slab_objects(s
, buf
, SO_CPU
);
3344 SLAB_ATTR_RO(cpu_slabs
);
3346 static ssize_t
objects_show(struct kmem_cache
*s
, char *buf
)
3348 return slab_objects(s
, buf
, SO_FULL
|SO_PARTIAL
|SO_CPU
|SO_OBJECTS
);
3350 SLAB_ATTR_RO(objects
);
3352 static ssize_t
sanity_checks_show(struct kmem_cache
*s
, char *buf
)
3354 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_DEBUG_FREE
));
3357 static ssize_t
sanity_checks_store(struct kmem_cache
*s
,
3358 const char *buf
, size_t length
)
3360 s
->flags
&= ~SLAB_DEBUG_FREE
;
3362 s
->flags
|= SLAB_DEBUG_FREE
;
3365 SLAB_ATTR(sanity_checks
);
3367 static ssize_t
trace_show(struct kmem_cache
*s
, char *buf
)
3369 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_TRACE
));
3372 static ssize_t
trace_store(struct kmem_cache
*s
, const char *buf
,
3375 s
->flags
&= ~SLAB_TRACE
;
3377 s
->flags
|= SLAB_TRACE
;
3382 static ssize_t
reclaim_account_show(struct kmem_cache
*s
, char *buf
)
3384 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_RECLAIM_ACCOUNT
));
3387 static ssize_t
reclaim_account_store(struct kmem_cache
*s
,
3388 const char *buf
, size_t length
)
3390 s
->flags
&= ~SLAB_RECLAIM_ACCOUNT
;
3392 s
->flags
|= SLAB_RECLAIM_ACCOUNT
;
3395 SLAB_ATTR(reclaim_account
);
3397 static ssize_t
hwcache_align_show(struct kmem_cache
*s
, char *buf
)
3399 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_HWCACHE_ALIGN
));
3401 SLAB_ATTR_RO(hwcache_align
);
3403 #ifdef CONFIG_ZONE_DMA
3404 static ssize_t
cache_dma_show(struct kmem_cache
*s
, char *buf
)
3406 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_CACHE_DMA
));
3408 SLAB_ATTR_RO(cache_dma
);
3411 static ssize_t
destroy_by_rcu_show(struct kmem_cache
*s
, char *buf
)
3413 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_DESTROY_BY_RCU
));
3415 SLAB_ATTR_RO(destroy_by_rcu
);
3417 static ssize_t
red_zone_show(struct kmem_cache
*s
, char *buf
)
3419 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_RED_ZONE
));
3422 static ssize_t
red_zone_store(struct kmem_cache
*s
,
3423 const char *buf
, size_t length
)
3425 if (any_slab_objects(s
))
3428 s
->flags
&= ~SLAB_RED_ZONE
;
3430 s
->flags
|= SLAB_RED_ZONE
;
3434 SLAB_ATTR(red_zone
);
3436 static ssize_t
poison_show(struct kmem_cache
*s
, char *buf
)
3438 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_POISON
));
3441 static ssize_t
poison_store(struct kmem_cache
*s
,
3442 const char *buf
, size_t length
)
3444 if (any_slab_objects(s
))
3447 s
->flags
&= ~SLAB_POISON
;
3449 s
->flags
|= SLAB_POISON
;
3455 static ssize_t
store_user_show(struct kmem_cache
*s
, char *buf
)
3457 return sprintf(buf
, "%d\n", !!(s
->flags
& SLAB_STORE_USER
));
3460 static ssize_t
store_user_store(struct kmem_cache
*s
,
3461 const char *buf
, size_t length
)
3463 if (any_slab_objects(s
))
3466 s
->flags
&= ~SLAB_STORE_USER
;
3468 s
->flags
|= SLAB_STORE_USER
;
3472 SLAB_ATTR(store_user
);
3474 static ssize_t
validate_show(struct kmem_cache
*s
, char *buf
)
3479 static ssize_t
validate_store(struct kmem_cache
*s
,
3480 const char *buf
, size_t length
)
3484 if (buf
[0] == '1') {
3485 ret
= validate_slab_cache(s
);
3491 SLAB_ATTR(validate
);
3493 static ssize_t
shrink_show(struct kmem_cache
*s
, char *buf
)
3498 static ssize_t
shrink_store(struct kmem_cache
*s
,
3499 const char *buf
, size_t length
)
3501 if (buf
[0] == '1') {
3502 int rc
= kmem_cache_shrink(s
);
3512 static ssize_t
alloc_calls_show(struct kmem_cache
*s
, char *buf
)
3514 if (!(s
->flags
& SLAB_STORE_USER
))
3516 return list_locations(s
, buf
, TRACK_ALLOC
);
3518 SLAB_ATTR_RO(alloc_calls
);
3520 static ssize_t
free_calls_show(struct kmem_cache
*s
, char *buf
)
3522 if (!(s
->flags
& SLAB_STORE_USER
))
3524 return list_locations(s
, buf
, TRACK_FREE
);
3526 SLAB_ATTR_RO(free_calls
);
3529 static ssize_t
defrag_ratio_show(struct kmem_cache
*s
, char *buf
)
3531 return sprintf(buf
, "%d\n", s
->defrag_ratio
/ 10);
3534 static ssize_t
defrag_ratio_store(struct kmem_cache
*s
,
3535 const char *buf
, size_t length
)
3537 int n
= simple_strtoul(buf
, NULL
, 10);
3540 s
->defrag_ratio
= n
* 10;
3543 SLAB_ATTR(defrag_ratio
);
3546 static struct attribute
* slab_attrs
[] = {
3547 &slab_size_attr
.attr
,
3548 &object_size_attr
.attr
,
3549 &objs_per_slab_attr
.attr
,
3554 &cpu_slabs_attr
.attr
,
3558 &sanity_checks_attr
.attr
,
3560 &hwcache_align_attr
.attr
,
3561 &reclaim_account_attr
.attr
,
3562 &destroy_by_rcu_attr
.attr
,
3563 &red_zone_attr
.attr
,
3565 &store_user_attr
.attr
,
3566 &validate_attr
.attr
,
3568 &alloc_calls_attr
.attr
,
3569 &free_calls_attr
.attr
,
3570 #ifdef CONFIG_ZONE_DMA
3571 &cache_dma_attr
.attr
,
3574 &defrag_ratio_attr
.attr
,
3579 static struct attribute_group slab_attr_group
= {
3580 .attrs
= slab_attrs
,
3583 static ssize_t
slab_attr_show(struct kobject
*kobj
,
3584 struct attribute
*attr
,
3587 struct slab_attribute
*attribute
;
3588 struct kmem_cache
*s
;
3591 attribute
= to_slab_attr(attr
);
3594 if (!attribute
->show
)
3597 err
= attribute
->show(s
, buf
);
3602 static ssize_t
slab_attr_store(struct kobject
*kobj
,
3603 struct attribute
*attr
,
3604 const char *buf
, size_t len
)
3606 struct slab_attribute
*attribute
;
3607 struct kmem_cache
*s
;
3610 attribute
= to_slab_attr(attr
);
3613 if (!attribute
->store
)
3616 err
= attribute
->store(s
, buf
, len
);
3621 static struct sysfs_ops slab_sysfs_ops
= {
3622 .show
= slab_attr_show
,
3623 .store
= slab_attr_store
,
3626 static struct kobj_type slab_ktype
= {
3627 .sysfs_ops
= &slab_sysfs_ops
,
3630 static int uevent_filter(struct kset
*kset
, struct kobject
*kobj
)
3632 struct kobj_type
*ktype
= get_ktype(kobj
);
3634 if (ktype
== &slab_ktype
)
3639 static struct kset_uevent_ops slab_uevent_ops
= {
3640 .filter
= uevent_filter
,
3643 static decl_subsys(slab
, &slab_ktype
, &slab_uevent_ops
);
3645 #define ID_STR_LENGTH 64
3647 /* Create a unique string id for a slab cache:
3649 * :[flags-]size:[memory address of kmemcache]
3651 static char *create_unique_id(struct kmem_cache
*s
)
3653 char *name
= kmalloc(ID_STR_LENGTH
, GFP_KERNEL
);
3660 * First flags affecting slabcache operations. We will only
3661 * get here for aliasable slabs so we do not need to support
3662 * too many flags. The flags here must cover all flags that
3663 * are matched during merging to guarantee that the id is
3666 if (s
->flags
& SLAB_CACHE_DMA
)
3668 if (s
->flags
& SLAB_RECLAIM_ACCOUNT
)
3670 if (s
->flags
& SLAB_DEBUG_FREE
)
3674 p
+= sprintf(p
, "%07d", s
->size
);
3675 BUG_ON(p
> name
+ ID_STR_LENGTH
- 1);
3679 static int sysfs_slab_add(struct kmem_cache
*s
)
3685 if (slab_state
< SYSFS
)
3686 /* Defer until later */
3689 unmergeable
= slab_unmergeable(s
);
3692 * Slabcache can never be merged so we can use the name proper.
3693 * This is typically the case for debug situations. In that
3694 * case we can catch duplicate names easily.
3696 sysfs_remove_link(&slab_subsys
.kobj
, s
->name
);
3700 * Create a unique name for the slab as a target
3703 name
= create_unique_id(s
);
3706 kobj_set_kset_s(s
, slab_subsys
);
3707 kobject_set_name(&s
->kobj
, name
);
3708 kobject_init(&s
->kobj
);
3709 err
= kobject_add(&s
->kobj
);
3713 err
= sysfs_create_group(&s
->kobj
, &slab_attr_group
);
3716 kobject_uevent(&s
->kobj
, KOBJ_ADD
);
3718 /* Setup first alias */
3719 sysfs_slab_alias(s
, s
->name
);
3725 static void sysfs_slab_remove(struct kmem_cache
*s
)
3727 kobject_uevent(&s
->kobj
, KOBJ_REMOVE
);
3728 kobject_del(&s
->kobj
);
3732 * Need to buffer aliases during bootup until sysfs becomes
3733 * available lest we loose that information.
3735 struct saved_alias
{
3736 struct kmem_cache
*s
;
3738 struct saved_alias
*next
;
3741 static struct saved_alias
*alias_list
;
3743 static int sysfs_slab_alias(struct kmem_cache
*s
, const char *name
)
3745 struct saved_alias
*al
;
3747 if (slab_state
== SYSFS
) {
3749 * If we have a leftover link then remove it.
3751 sysfs_remove_link(&slab_subsys
.kobj
, name
);
3752 return sysfs_create_link(&slab_subsys
.kobj
,
3756 al
= kmalloc(sizeof(struct saved_alias
), GFP_KERNEL
);
3762 al
->next
= alias_list
;
3767 static int __init
slab_sysfs_init(void)
3769 struct kmem_cache
*s
;
3772 err
= subsystem_register(&slab_subsys
);
3774 printk(KERN_ERR
"Cannot register slab subsystem.\n");
3780 list_for_each_entry(s
, &slab_caches
, list
) {
3781 err
= sysfs_slab_add(s
);
3785 while (alias_list
) {
3786 struct saved_alias
*al
= alias_list
;
3788 alias_list
= alias_list
->next
;
3789 err
= sysfs_slab_alias(al
->s
, al
->name
);
3798 __initcall(slab_sysfs_init
);