2 * linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver
4 * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * Documentation: ARM DDI 0173B
12 #include <linux/module.h>
13 #include <linux/delay.h>
14 #include <linux/init.h>
15 #include <linux/ioport.h>
16 #include <linux/device.h>
17 #include <linux/spinlock.h>
18 #include <linux/interrupt.h>
19 #include <linux/err.h>
20 #include <linux/amba/bus.h>
23 #include <sound/core.h>
24 #include <sound/initval.h>
25 #include <sound/ac97_codec.h>
26 #include <sound/pcm.h>
27 #include <sound/pcm_params.h>
31 #define DRIVER_NAME "aaci-pl041"
33 #define FRAME_PERIOD_US 21
36 * PM support is not complete. Turn it off.
40 static void aaci_ac97_select_codec(struct aaci
*aaci
, struct snd_ac97
*ac97
)
42 u32 v
, maincr
= aaci
->maincr
| MAINCR_SCRA(ac97
->num
);
45 * Ensure that the slot 1/2 RX registers are empty.
47 v
= readl(aaci
->base
+ AACI_SLFR
);
49 readl(aaci
->base
+ AACI_SL2RX
);
51 readl(aaci
->base
+ AACI_SL1RX
);
53 if (maincr
!= readl(aaci
->base
+ AACI_MAINCR
)) {
54 writel(maincr
, aaci
->base
+ AACI_MAINCR
);
55 readl(aaci
->base
+ AACI_MAINCR
);
62 * The recommended use of programming the external codec through slot 1
63 * and slot 2 data is to use the channels during setup routines and the
64 * slot register at any other time. The data written into slot 1, slot 2
65 * and slot 12 registers is transmitted only when their corresponding
66 * SI1TxEn, SI2TxEn and SI12TxEn bits are set in the AACI_MAINCR
69 static void aaci_ac97_write(struct snd_ac97
*ac97
, unsigned short reg
,
72 struct aaci
*aaci
= ac97
->private_data
;
79 mutex_lock(&aaci
->ac97_sem
);
81 aaci_ac97_select_codec(aaci
, ac97
);
84 * P54: You must ensure that AACI_SL2TX is always written
85 * to, if required, before data is written to AACI_SL1TX.
87 writel(val
<< 4, aaci
->base
+ AACI_SL2TX
);
88 writel(reg
<< 12, aaci
->base
+ AACI_SL1TX
);
90 /* Initially, wait one frame period */
91 udelay(FRAME_PERIOD_US
);
93 /* And then wait an additional eight frame periods for it to be sent */
94 timeout
= FRAME_PERIOD_US
* 8;
97 v
= readl(aaci
->base
+ AACI_SLFR
);
98 } while ((v
& (SLFR_1TXB
|SLFR_2TXB
)) && --timeout
);
100 if (v
& (SLFR_1TXB
|SLFR_2TXB
))
101 dev_err(&aaci
->dev
->dev
,
102 "timeout waiting for write to complete\n");
104 mutex_unlock(&aaci
->ac97_sem
);
108 * Read an AC'97 register.
110 static unsigned short aaci_ac97_read(struct snd_ac97
*ac97
, unsigned short reg
)
112 struct aaci
*aaci
= ac97
->private_data
;
113 int timeout
, retries
= 10;
119 mutex_lock(&aaci
->ac97_sem
);
121 aaci_ac97_select_codec(aaci
, ac97
);
124 * Write the register address to slot 1.
126 writel((reg
<< 12) | (1 << 19), aaci
->base
+ AACI_SL1TX
);
128 /* Initially, wait one frame period */
129 udelay(FRAME_PERIOD_US
);
131 /* And then wait an additional eight frame periods for it to be sent */
132 timeout
= FRAME_PERIOD_US
* 8;
135 v
= readl(aaci
->base
+ AACI_SLFR
);
136 } while ((v
& SLFR_1TXB
) && --timeout
);
139 dev_err(&aaci
->dev
->dev
, "timeout on slot 1 TX busy\n");
144 /* Now wait for the response frame */
145 udelay(FRAME_PERIOD_US
);
147 /* And then wait an additional eight frame periods for data */
148 timeout
= FRAME_PERIOD_US
* 8;
152 v
= readl(aaci
->base
+ AACI_SLFR
) & (SLFR_1RXV
|SLFR_2RXV
);
153 } while ((v
!= (SLFR_1RXV
|SLFR_2RXV
)) && --timeout
);
155 if (v
!= (SLFR_1RXV
|SLFR_2RXV
)) {
156 dev_err(&aaci
->dev
->dev
, "timeout on RX valid\n");
162 v
= readl(aaci
->base
+ AACI_SL1RX
) >> 12;
164 v
= readl(aaci
->base
+ AACI_SL2RX
) >> 4;
166 } else if (--retries
) {
167 dev_warn(&aaci
->dev
->dev
,
168 "ac97 read back fail. retry\n");
171 dev_warn(&aaci
->dev
->dev
,
172 "wrong ac97 register read back (%x != %x)\n",
178 mutex_unlock(&aaci
->ac97_sem
);
183 aaci_chan_wait_ready(struct aaci_runtime
*aacirun
, unsigned long mask
)
190 val
= readl(aacirun
->base
+ AACI_SR
);
191 } while (val
& mask
&& timeout
--);
199 static void aaci_fifo_irq(struct aaci
*aaci
, int channel
, u32 mask
)
201 if (mask
& ISR_ORINTR
) {
202 dev_warn(&aaci
->dev
->dev
, "RX overrun on chan %d\n", channel
);
203 writel(ICLR_RXOEC1
<< channel
, aaci
->base
+ AACI_INTCLR
);
206 if (mask
& ISR_RXTOINTR
) {
207 dev_warn(&aaci
->dev
->dev
, "RX timeout on chan %d\n", channel
);
208 writel(ICLR_RXTOFEC1
<< channel
, aaci
->base
+ AACI_INTCLR
);
211 if (mask
& ISR_RXINTR
) {
212 struct aaci_runtime
*aacirun
= &aaci
->capture
;
213 bool period_elapsed
= false;
216 if (!aacirun
->substream
|| !aacirun
->start
) {
217 dev_warn(&aaci
->dev
->dev
, "RX interrupt???\n");
218 writel(0, aacirun
->base
+ AACI_IE
);
222 spin_lock(&aacirun
->lock
);
226 unsigned int len
= aacirun
->fifo_bytes
;
229 if (aacirun
->bytes
<= 0) {
230 aacirun
->bytes
+= aacirun
->period
;
231 period_elapsed
= true;
233 if (!(aacirun
->cr
& CR_EN
))
236 val
= readl(aacirun
->base
+ AACI_SR
);
237 if (!(val
& SR_RXHF
))
239 if (!(val
& SR_RXFF
))
242 aacirun
->bytes
-= len
;
244 /* reading 16 bytes at a time */
245 for( ; len
> 0; len
-= 16) {
247 "ldmia %1, {r0, r1, r2, r3}\n\t"
248 "stmia %0!, {r0, r1, r2, r3}"
250 : "r" (aacirun
->fifo
)
251 : "r0", "r1", "r2", "r3", "cc");
253 if (ptr
>= aacirun
->end
)
254 ptr
= aacirun
->start
;
260 spin_unlock(&aacirun
->lock
);
263 snd_pcm_period_elapsed(aacirun
->substream
);
266 if (mask
& ISR_URINTR
) {
267 dev_dbg(&aaci
->dev
->dev
, "TX underrun on chan %d\n", channel
);
268 writel(ICLR_TXUEC1
<< channel
, aaci
->base
+ AACI_INTCLR
);
271 if (mask
& ISR_TXINTR
) {
272 struct aaci_runtime
*aacirun
= &aaci
->playback
;
273 bool period_elapsed
= false;
276 if (!aacirun
->substream
|| !aacirun
->start
) {
277 dev_warn(&aaci
->dev
->dev
, "TX interrupt???\n");
278 writel(0, aacirun
->base
+ AACI_IE
);
282 spin_lock(&aacirun
->lock
);
286 unsigned int len
= aacirun
->fifo_bytes
;
289 if (aacirun
->bytes
<= 0) {
290 aacirun
->bytes
+= aacirun
->period
;
291 period_elapsed
= true;
293 if (!(aacirun
->cr
& CR_EN
))
296 val
= readl(aacirun
->base
+ AACI_SR
);
297 if (!(val
& SR_TXHE
))
299 if (!(val
& SR_TXFE
))
302 aacirun
->bytes
-= len
;
304 /* writing 16 bytes at a time */
305 for ( ; len
> 0; len
-= 16) {
307 "ldmia %0!, {r0, r1, r2, r3}\n\t"
308 "stmia %1, {r0, r1, r2, r3}"
310 : "r" (aacirun
->fifo
)
311 : "r0", "r1", "r2", "r3", "cc");
313 if (ptr
>= aacirun
->end
)
314 ptr
= aacirun
->start
;
320 spin_unlock(&aacirun
->lock
);
323 snd_pcm_period_elapsed(aacirun
->substream
);
327 static irqreturn_t
aaci_irq(int irq
, void *devid
)
329 struct aaci
*aaci
= devid
;
333 mask
= readl(aaci
->base
+ AACI_ALLINTS
);
336 for (i
= 0; i
< 4; i
++, m
>>= 7) {
338 aaci_fifo_irq(aaci
, i
, m
);
343 return mask
? IRQ_HANDLED
: IRQ_NONE
;
351 static struct snd_pcm_hardware aaci_hw_info
= {
352 .info
= SNDRV_PCM_INFO_MMAP
|
353 SNDRV_PCM_INFO_MMAP_VALID
|
354 SNDRV_PCM_INFO_INTERLEAVED
|
355 SNDRV_PCM_INFO_BLOCK_TRANSFER
|
356 SNDRV_PCM_INFO_RESUME
,
359 * ALSA doesn't support 18-bit or 20-bit packed into 32-bit
360 * words. It also doesn't support 12-bit at all.
362 .formats
= SNDRV_PCM_FMTBIT_S16_LE
,
364 /* rates are setup from the AC'97 codec */
367 .buffer_bytes_max
= 64 * 1024,
368 .period_bytes_min
= 256,
369 .period_bytes_max
= PAGE_SIZE
,
371 .periods_max
= PAGE_SIZE
/ 16,
375 * We can support two and four channel audio. Unfortunately
376 * six channel audio requires a non-standard channel ordering:
378 * 4 -> FL(3), FR(4), SL(7), SR(8)
379 * 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required)
380 * FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual)
381 * This requires an ALSA configuration file to correct.
383 static int aaci_rule_channels(struct snd_pcm_hw_params
*p
,
384 struct snd_pcm_hw_rule
*rule
)
386 static unsigned int channel_list
[] = { 2, 4, 6 };
387 struct aaci
*aaci
= rule
->private;
388 unsigned int mask
= 1 << 0, slots
;
390 /* pcms[0] is the our 5.1 PCM instance. */
391 slots
= aaci
->ac97_bus
->pcms
[0].r
[0].slots
;
392 if (slots
& (1 << AC97_SLOT_PCM_SLEFT
)) {
394 if (slots
& (1 << AC97_SLOT_LFE
))
398 return snd_interval_list(hw_param_interval(p
, rule
->var
),
399 ARRAY_SIZE(channel_list
), channel_list
, mask
);
402 static int aaci_pcm_open(struct snd_pcm_substream
*substream
)
404 struct snd_pcm_runtime
*runtime
= substream
->runtime
;
405 struct aaci
*aaci
= substream
->private_data
;
406 struct aaci_runtime
*aacirun
;
409 if (substream
->stream
== SNDRV_PCM_STREAM_PLAYBACK
) {
410 aacirun
= &aaci
->playback
;
412 aacirun
= &aaci
->capture
;
415 aacirun
->substream
= substream
;
416 runtime
->private_data
= aacirun
;
417 runtime
->hw
= aaci_hw_info
;
418 runtime
->hw
.rates
= aacirun
->pcm
->rates
;
419 snd_pcm_limit_hw_rates(runtime
);
421 if (substream
->stream
== SNDRV_PCM_STREAM_PLAYBACK
) {
422 runtime
->hw
.channels_max
= 6;
424 /* Add rule describing channel dependency. */
425 ret
= snd_pcm_hw_rule_add(substream
->runtime
, 0,
426 SNDRV_PCM_HW_PARAM_CHANNELS
,
427 aaci_rule_channels
, aaci
,
428 SNDRV_PCM_HW_PARAM_CHANNELS
, -1);
432 if (aacirun
->pcm
->r
[1].slots
)
433 snd_ac97_pcm_double_rate_rules(runtime
);
437 * ALSA wants the byte-size of the FIFOs. As we only support
438 * 16-bit samples, this is twice the FIFO depth irrespective
439 * of whether it's in compact mode or not.
441 runtime
->hw
.fifo_size
= aaci
->fifo_depth
* 2;
443 mutex_lock(&aaci
->irq_lock
);
444 if (!aaci
->users
++) {
445 ret
= request_irq(aaci
->dev
->irq
[0], aaci_irq
,
446 IRQF_SHARED
, DRIVER_NAME
, aaci
);
450 mutex_unlock(&aaci
->irq_lock
);
459 static int aaci_pcm_close(struct snd_pcm_substream
*substream
)
461 struct aaci
*aaci
= substream
->private_data
;
462 struct aaci_runtime
*aacirun
= substream
->runtime
->private_data
;
464 WARN_ON(aacirun
->cr
& CR_EN
);
466 aacirun
->substream
= NULL
;
468 mutex_lock(&aaci
->irq_lock
);
470 free_irq(aaci
->dev
->irq
[0], aaci
);
471 mutex_unlock(&aaci
->irq_lock
);
476 static int aaci_pcm_hw_free(struct snd_pcm_substream
*substream
)
478 struct aaci_runtime
*aacirun
= substream
->runtime
->private_data
;
481 * This must not be called with the device enabled.
483 WARN_ON(aacirun
->cr
& CR_EN
);
485 if (aacirun
->pcm_open
)
486 snd_ac97_pcm_close(aacirun
->pcm
);
487 aacirun
->pcm_open
= 0;
490 * Clear out the DMA and any allocated buffers.
492 snd_pcm_lib_free_pages(substream
);
497 /* Channel to slot mask */
498 static const u32 channels_to_slotmask
[] = {
499 [2] = CR_SL3
| CR_SL4
,
500 [4] = CR_SL3
| CR_SL4
| CR_SL7
| CR_SL8
,
501 [6] = CR_SL3
| CR_SL4
| CR_SL7
| CR_SL8
| CR_SL6
| CR_SL9
,
504 static int aaci_pcm_hw_params(struct snd_pcm_substream
*substream
,
505 struct snd_pcm_hw_params
*params
)
507 struct aaci_runtime
*aacirun
= substream
->runtime
->private_data
;
508 unsigned int channels
= params_channels(params
);
509 unsigned int rate
= params_rate(params
);
510 int dbl
= rate
> 48000;
513 aaci_pcm_hw_free(substream
);
514 if (aacirun
->pcm_open
) {
515 snd_ac97_pcm_close(aacirun
->pcm
);
516 aacirun
->pcm_open
= 0;
519 /* channels is already limited to 2, 4, or 6 by aaci_rule_channels */
520 if (dbl
&& channels
!= 2)
523 err
= snd_pcm_lib_malloc_pages(substream
,
524 params_buffer_bytes(params
));
526 struct aaci
*aaci
= substream
->private_data
;
528 err
= snd_ac97_pcm_open(aacirun
->pcm
, rate
, channels
,
529 aacirun
->pcm
->r
[dbl
].slots
);
531 aacirun
->pcm_open
= err
== 0;
532 aacirun
->cr
= CR_FEN
| CR_COMPACT
| CR_SZ16
;
533 aacirun
->cr
|= channels_to_slotmask
[channels
+ dbl
* 2];
536 * fifo_bytes is the number of bytes we transfer to/from
537 * the FIFO, including padding. So that's x4. As we're
538 * in compact mode, the FIFO is half the size.
540 aacirun
->fifo_bytes
= aaci
->fifo_depth
* 4 / 2;
546 static int aaci_pcm_prepare(struct snd_pcm_substream
*substream
)
548 struct snd_pcm_runtime
*runtime
= substream
->runtime
;
549 struct aaci_runtime
*aacirun
= runtime
->private_data
;
551 aacirun
->period
= snd_pcm_lib_period_bytes(substream
);
552 aacirun
->start
= runtime
->dma_area
;
553 aacirun
->end
= aacirun
->start
+ snd_pcm_lib_buffer_bytes(substream
);
554 aacirun
->ptr
= aacirun
->start
;
555 aacirun
->bytes
= aacirun
->period
;
560 static snd_pcm_uframes_t
aaci_pcm_pointer(struct snd_pcm_substream
*substream
)
562 struct snd_pcm_runtime
*runtime
= substream
->runtime
;
563 struct aaci_runtime
*aacirun
= runtime
->private_data
;
564 ssize_t bytes
= aacirun
->ptr
- aacirun
->start
;
566 return bytes_to_frames(runtime
, bytes
);
571 * Playback specific ALSA stuff
573 static void aaci_pcm_playback_stop(struct aaci_runtime
*aacirun
)
577 ie
= readl(aacirun
->base
+ AACI_IE
);
578 ie
&= ~(IE_URIE
|IE_TXIE
);
579 writel(ie
, aacirun
->base
+ AACI_IE
);
580 aacirun
->cr
&= ~CR_EN
;
581 aaci_chan_wait_ready(aacirun
, SR_TXB
);
582 writel(aacirun
->cr
, aacirun
->base
+ AACI_TXCR
);
585 static void aaci_pcm_playback_start(struct aaci_runtime
*aacirun
)
589 aaci_chan_wait_ready(aacirun
, SR_TXB
);
590 aacirun
->cr
|= CR_EN
;
592 ie
= readl(aacirun
->base
+ AACI_IE
);
593 ie
|= IE_URIE
| IE_TXIE
;
594 writel(ie
, aacirun
->base
+ AACI_IE
);
595 writel(aacirun
->cr
, aacirun
->base
+ AACI_TXCR
);
598 static int aaci_pcm_playback_trigger(struct snd_pcm_substream
*substream
, int cmd
)
600 struct aaci_runtime
*aacirun
= substream
->runtime
->private_data
;
604 spin_lock_irqsave(&aacirun
->lock
, flags
);
607 case SNDRV_PCM_TRIGGER_START
:
608 aaci_pcm_playback_start(aacirun
);
611 case SNDRV_PCM_TRIGGER_RESUME
:
612 aaci_pcm_playback_start(aacirun
);
615 case SNDRV_PCM_TRIGGER_STOP
:
616 aaci_pcm_playback_stop(aacirun
);
619 case SNDRV_PCM_TRIGGER_SUSPEND
:
620 aaci_pcm_playback_stop(aacirun
);
623 case SNDRV_PCM_TRIGGER_PAUSE_PUSH
:
626 case SNDRV_PCM_TRIGGER_PAUSE_RELEASE
:
633 spin_unlock_irqrestore(&aacirun
->lock
, flags
);
638 static struct snd_pcm_ops aaci_playback_ops
= {
639 .open
= aaci_pcm_open
,
640 .close
= aaci_pcm_close
,
641 .ioctl
= snd_pcm_lib_ioctl
,
642 .hw_params
= aaci_pcm_hw_params
,
643 .hw_free
= aaci_pcm_hw_free
,
644 .prepare
= aaci_pcm_prepare
,
645 .trigger
= aaci_pcm_playback_trigger
,
646 .pointer
= aaci_pcm_pointer
,
649 static void aaci_pcm_capture_stop(struct aaci_runtime
*aacirun
)
653 aaci_chan_wait_ready(aacirun
, SR_RXB
);
655 ie
= readl(aacirun
->base
+ AACI_IE
);
656 ie
&= ~(IE_ORIE
| IE_RXIE
);
657 writel(ie
, aacirun
->base
+AACI_IE
);
659 aacirun
->cr
&= ~CR_EN
;
661 writel(aacirun
->cr
, aacirun
->base
+ AACI_RXCR
);
664 static void aaci_pcm_capture_start(struct aaci_runtime
*aacirun
)
668 aaci_chan_wait_ready(aacirun
, SR_RXB
);
671 /* RX Timeout value: bits 28:17 in RXCR */
672 aacirun
->cr
|= 0xf << 17;
675 aacirun
->cr
|= CR_EN
;
676 writel(aacirun
->cr
, aacirun
->base
+ AACI_RXCR
);
678 ie
= readl(aacirun
->base
+ AACI_IE
);
679 ie
|= IE_ORIE
|IE_RXIE
; // overrun and rx interrupt -- half full
680 writel(ie
, aacirun
->base
+ AACI_IE
);
683 static int aaci_pcm_capture_trigger(struct snd_pcm_substream
*substream
, int cmd
)
685 struct aaci_runtime
*aacirun
= substream
->runtime
->private_data
;
689 spin_lock_irqsave(&aacirun
->lock
, flags
);
692 case SNDRV_PCM_TRIGGER_START
:
693 aaci_pcm_capture_start(aacirun
);
696 case SNDRV_PCM_TRIGGER_RESUME
:
697 aaci_pcm_capture_start(aacirun
);
700 case SNDRV_PCM_TRIGGER_STOP
:
701 aaci_pcm_capture_stop(aacirun
);
704 case SNDRV_PCM_TRIGGER_SUSPEND
:
705 aaci_pcm_capture_stop(aacirun
);
708 case SNDRV_PCM_TRIGGER_PAUSE_PUSH
:
711 case SNDRV_PCM_TRIGGER_PAUSE_RELEASE
:
718 spin_unlock_irqrestore(&aacirun
->lock
, flags
);
723 static int aaci_pcm_capture_prepare(struct snd_pcm_substream
*substream
)
725 struct snd_pcm_runtime
*runtime
= substream
->runtime
;
726 struct aaci
*aaci
= substream
->private_data
;
728 aaci_pcm_prepare(substream
);
730 /* allow changing of sample rate */
731 aaci_ac97_write(aaci
->ac97
, AC97_EXTENDED_STATUS
, 0x0001); /* VRA */
732 aaci_ac97_write(aaci
->ac97
, AC97_PCM_LR_ADC_RATE
, runtime
->rate
);
733 aaci_ac97_write(aaci
->ac97
, AC97_PCM_MIC_ADC_RATE
, runtime
->rate
);
735 /* Record select: Mic: 0, Aux: 3, Line: 4 */
736 aaci_ac97_write(aaci
->ac97
, AC97_REC_SEL
, 0x0404);
741 static struct snd_pcm_ops aaci_capture_ops
= {
742 .open
= aaci_pcm_open
,
743 .close
= aaci_pcm_close
,
744 .ioctl
= snd_pcm_lib_ioctl
,
745 .hw_params
= aaci_pcm_hw_params
,
746 .hw_free
= aaci_pcm_hw_free
,
747 .prepare
= aaci_pcm_capture_prepare
,
748 .trigger
= aaci_pcm_capture_trigger
,
749 .pointer
= aaci_pcm_pointer
,
756 static int aaci_do_suspend(struct snd_card
*card
, unsigned int state
)
758 struct aaci
*aaci
= card
->private_data
;
759 snd_power_change_state(card
, SNDRV_CTL_POWER_D3cold
);
760 snd_pcm_suspend_all(aaci
->pcm
);
764 static int aaci_do_resume(struct snd_card
*card
, unsigned int state
)
766 snd_power_change_state(card
, SNDRV_CTL_POWER_D0
);
770 static int aaci_suspend(struct amba_device
*dev
, pm_message_t state
)
772 struct snd_card
*card
= amba_get_drvdata(dev
);
773 return card
? aaci_do_suspend(card
) : 0;
776 static int aaci_resume(struct amba_device
*dev
)
778 struct snd_card
*card
= amba_get_drvdata(dev
);
779 return card
? aaci_do_resume(card
) : 0;
782 #define aaci_do_suspend NULL
783 #define aaci_do_resume NULL
784 #define aaci_suspend NULL
785 #define aaci_resume NULL
789 static struct ac97_pcm ac97_defs
[] = {
790 [0] = { /* Front PCM */
794 .slots
= (1 << AC97_SLOT_PCM_LEFT
) |
795 (1 << AC97_SLOT_PCM_RIGHT
) |
796 (1 << AC97_SLOT_PCM_CENTER
) |
797 (1 << AC97_SLOT_PCM_SLEFT
) |
798 (1 << AC97_SLOT_PCM_SRIGHT
) |
799 (1 << AC97_SLOT_LFE
),
802 .slots
= (1 << AC97_SLOT_PCM_LEFT
) |
803 (1 << AC97_SLOT_PCM_RIGHT
) |
804 (1 << AC97_SLOT_PCM_LEFT_0
) |
805 (1 << AC97_SLOT_PCM_RIGHT_0
),
814 .slots
= (1 << AC97_SLOT_PCM_LEFT
) |
815 (1 << AC97_SLOT_PCM_RIGHT
),
824 .slots
= (1 << AC97_SLOT_MIC
),
830 static struct snd_ac97_bus_ops aaci_bus_ops
= {
831 .write
= aaci_ac97_write
,
832 .read
= aaci_ac97_read
,
835 static int aaci_probe_ac97(struct aaci
*aaci
)
837 struct snd_ac97_template ac97_template
;
838 struct snd_ac97_bus
*ac97_bus
;
839 struct snd_ac97
*ac97
;
843 * Assert AACIRESET for 2us
845 writel(0, aaci
->base
+ AACI_RESET
);
847 writel(RESET_NRST
, aaci
->base
+ AACI_RESET
);
850 * Give the AC'97 codec more than enough time
851 * to wake up. (42us = ~2 frames at 48kHz.)
853 udelay(FRAME_PERIOD_US
* 2);
855 ret
= snd_ac97_bus(aaci
->card
, 0, &aaci_bus_ops
, aaci
, &ac97_bus
);
859 ac97_bus
->clock
= 48000;
860 aaci
->ac97_bus
= ac97_bus
;
862 memset(&ac97_template
, 0, sizeof(struct snd_ac97_template
));
863 ac97_template
.private_data
= aaci
;
864 ac97_template
.num
= 0;
865 ac97_template
.scaps
= AC97_SCAP_SKIP_MODEM
;
867 ret
= snd_ac97_mixer(ac97_bus
, &ac97_template
, &ac97
);
873 * Disable AC97 PC Beep input on audio codecs.
875 if (ac97_is_audio(ac97
))
876 snd_ac97_write_cache(ac97
, AC97_PC_BEEP
, 0x801e);
878 ret
= snd_ac97_pcm_assign(ac97_bus
, ARRAY_SIZE(ac97_defs
), ac97_defs
);
882 aaci
->playback
.pcm
= &ac97_bus
->pcms
[0];
883 aaci
->capture
.pcm
= &ac97_bus
->pcms
[1];
889 static void aaci_free_card(struct snd_card
*card
)
891 struct aaci
*aaci
= card
->private_data
;
896 static struct aaci
*aaci_init_card(struct amba_device
*dev
)
899 struct snd_card
*card
;
902 err
= snd_card_create(SNDRV_DEFAULT_IDX1
, SNDRV_DEFAULT_STR1
,
903 THIS_MODULE
, sizeof(struct aaci
), &card
);
907 card
->private_free
= aaci_free_card
;
909 strlcpy(card
->driver
, DRIVER_NAME
, sizeof(card
->driver
));
910 strlcpy(card
->shortname
, "ARM AC'97 Interface", sizeof(card
->shortname
));
911 snprintf(card
->longname
, sizeof(card
->longname
),
912 "%s PL%03x rev%u at 0x%08llx, irq %d",
913 card
->shortname
, amba_part(dev
), amba_rev(dev
),
914 (unsigned long long)dev
->res
.start
, dev
->irq
[0]);
916 aaci
= card
->private_data
;
917 mutex_init(&aaci
->ac97_sem
);
918 mutex_init(&aaci
->irq_lock
);
922 /* Set MAINCR to allow slot 1 and 2 data IO */
923 aaci
->maincr
= MAINCR_IE
| MAINCR_SL1RXEN
| MAINCR_SL1TXEN
|
924 MAINCR_SL2RXEN
| MAINCR_SL2TXEN
;
929 static int aaci_init_pcm(struct aaci
*aaci
)
934 ret
= snd_pcm_new(aaci
->card
, "AACI AC'97", 0, 1, 1, &pcm
);
937 pcm
->private_data
= aaci
;
940 strlcpy(pcm
->name
, DRIVER_NAME
, sizeof(pcm
->name
));
942 snd_pcm_set_ops(pcm
, SNDRV_PCM_STREAM_PLAYBACK
, &aaci_playback_ops
);
943 snd_pcm_set_ops(pcm
, SNDRV_PCM_STREAM_CAPTURE
, &aaci_capture_ops
);
944 snd_pcm_lib_preallocate_pages_for_all(pcm
, SNDRV_DMA_TYPE_DEV
,
951 static unsigned int aaci_size_fifo(struct aaci
*aaci
)
953 struct aaci_runtime
*aacirun
= &aaci
->playback
;
957 * Enable the channel, but don't assign it to any slots, so
958 * it won't empty onto the AC'97 link.
960 writel(CR_FEN
| CR_SZ16
| CR_EN
, aacirun
->base
+ AACI_TXCR
);
962 for (i
= 0; !(readl(aacirun
->base
+ AACI_SR
) & SR_TXFF
) && i
< 4096; i
++)
963 writel(0, aacirun
->fifo
);
965 writel(0, aacirun
->base
+ AACI_TXCR
);
968 * Re-initialise the AACI after the FIFO depth test, to
969 * ensure that the FIFOs are empty. Unfortunately, merely
970 * disabling the channel doesn't clear the FIFO.
972 writel(aaci
->maincr
& ~MAINCR_IE
, aaci
->base
+ AACI_MAINCR
);
973 readl(aaci
->base
+ AACI_MAINCR
);
975 writel(aaci
->maincr
, aaci
->base
+ AACI_MAINCR
);
978 * If we hit 4096 entries, we failed. Go back to the specified
987 static int aaci_probe(struct amba_device
*dev
,
988 const struct amba_id
*id
)
993 ret
= amba_request_regions(dev
, NULL
);
997 aaci
= aaci_init_card(dev
);
1003 aaci
->base
= ioremap(dev
->res
.start
, resource_size(&dev
->res
));
1010 * Playback uses AACI channel 0
1012 spin_lock_init(&aaci
->playback
.lock
);
1013 aaci
->playback
.base
= aaci
->base
+ AACI_CSCH1
;
1014 aaci
->playback
.fifo
= aaci
->base
+ AACI_DR1
;
1017 * Capture uses AACI channel 0
1019 spin_lock_init(&aaci
->capture
.lock
);
1020 aaci
->capture
.base
= aaci
->base
+ AACI_CSCH1
;
1021 aaci
->capture
.fifo
= aaci
->base
+ AACI_DR1
;
1023 for (i
= 0; i
< 4; i
++) {
1024 void __iomem
*base
= aaci
->base
+ i
* 0x14;
1026 writel(0, base
+ AACI_IE
);
1027 writel(0, base
+ AACI_TXCR
);
1028 writel(0, base
+ AACI_RXCR
);
1031 writel(0x1fff, aaci
->base
+ AACI_INTCLR
);
1032 writel(aaci
->maincr
, aaci
->base
+ AACI_MAINCR
);
1034 * Fix: ac97 read back fail errors by reading
1035 * from any arbitrary aaci register.
1037 readl(aaci
->base
+ AACI_CSCH1
);
1038 ret
= aaci_probe_ac97(aaci
);
1043 * Size the FIFOs (must be multiple of 16).
1044 * This is the number of entries in the FIFO.
1046 aaci
->fifo_depth
= aaci_size_fifo(aaci
);
1047 if (aaci
->fifo_depth
& 15) {
1048 printk(KERN_WARNING
"AACI: FIFO depth %d not supported\n",
1054 ret
= aaci_init_pcm(aaci
);
1058 snd_card_set_dev(aaci
->card
, &dev
->dev
);
1060 ret
= snd_card_register(aaci
->card
);
1062 dev_info(&dev
->dev
, "%s\n", aaci
->card
->longname
);
1063 dev_info(&dev
->dev
, "FIFO %u entries\n", aaci
->fifo_depth
);
1064 amba_set_drvdata(dev
, aaci
->card
);
1070 snd_card_free(aaci
->card
);
1071 amba_release_regions(dev
);
1075 static int aaci_remove(struct amba_device
*dev
)
1077 struct snd_card
*card
= amba_get_drvdata(dev
);
1080 struct aaci
*aaci
= card
->private_data
;
1081 writel(0, aaci
->base
+ AACI_MAINCR
);
1083 snd_card_free(card
);
1084 amba_release_regions(dev
);
1090 static struct amba_id aaci_ids
[] = {
1098 MODULE_DEVICE_TABLE(amba
, aaci_ids
);
1100 static struct amba_driver aaci_driver
= {
1102 .name
= DRIVER_NAME
,
1104 .probe
= aaci_probe
,
1105 .remove
= aaci_remove
,
1106 .suspend
= aaci_suspend
,
1107 .resume
= aaci_resume
,
1108 .id_table
= aaci_ids
,
1111 module_amba_driver(aaci_driver
);
1113 MODULE_LICENSE("GPL");
1114 MODULE_DESCRIPTION("ARM PrimeCell PL041 Advanced Audio CODEC Interface driver");