mmc: dw_mmc: Override blk_settings with platdata on IDMAC
[linux-2.6.git] / net / mac80211 / status.c
blob5f8f89e89d6b446e989d9d3ae546174a711e016f
1 /*
2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
4 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
5 * Copyright 2008-2010 Johannes Berg <johannes@sipsolutions.net>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <linux/export.h>
13 #include <linux/etherdevice.h>
14 #include <net/mac80211.h>
15 #include <asm/unaligned.h>
16 #include "ieee80211_i.h"
17 #include "rate.h"
18 #include "mesh.h"
19 #include "led.h"
20 #include "wme.h"
23 void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
24 struct sk_buff *skb)
26 struct ieee80211_local *local = hw_to_local(hw);
27 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
28 int tmp;
30 skb->pkt_type = IEEE80211_TX_STATUS_MSG;
31 skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
32 &local->skb_queue : &local->skb_queue_unreliable, skb);
33 tmp = skb_queue_len(&local->skb_queue) +
34 skb_queue_len(&local->skb_queue_unreliable);
35 while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
36 (skb = skb_dequeue(&local->skb_queue_unreliable))) {
37 dev_kfree_skb_irq(skb);
38 tmp--;
39 I802_DEBUG_INC(local->tx_status_drop);
41 tasklet_schedule(&local->tasklet);
43 EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
45 static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
46 struct sta_info *sta,
47 struct sk_buff *skb)
49 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
50 struct ieee80211_hdr *hdr = (void *)skb->data;
51 int ac;
54 * This skb 'survived' a round-trip through the driver, and
55 * hopefully the driver didn't mangle it too badly. However,
56 * we can definitely not rely on the control information
57 * being correct. Clear it so we don't get junk there, and
58 * indicate that it needs new processing, but must not be
59 * modified/encrypted again.
61 memset(&info->control, 0, sizeof(info->control));
63 info->control.jiffies = jiffies;
64 info->control.vif = &sta->sdata->vif;
65 info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING |
66 IEEE80211_TX_INTFL_RETRANSMISSION;
67 info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS;
69 sta->tx_filtered_count++;
72 * Clear more-data bit on filtered frames, it might be set
73 * but later frames might time out so it might have to be
74 * clear again ... It's all rather unlikely (this frame
75 * should time out first, right?) but let's not confuse
76 * peers unnecessarily.
78 if (hdr->frame_control & cpu_to_le16(IEEE80211_FCTL_MOREDATA))
79 hdr->frame_control &= ~cpu_to_le16(IEEE80211_FCTL_MOREDATA);
81 if (ieee80211_is_data_qos(hdr->frame_control)) {
82 u8 *p = ieee80211_get_qos_ctl(hdr);
83 int tid = *p & IEEE80211_QOS_CTL_TID_MASK;
86 * Clear EOSP if set, this could happen e.g.
87 * if an absence period (us being a P2P GO)
88 * shortens the SP.
90 if (*p & IEEE80211_QOS_CTL_EOSP)
91 *p &= ~IEEE80211_QOS_CTL_EOSP;
92 ac = ieee802_1d_to_ac[tid & 7];
93 } else {
94 ac = IEEE80211_AC_BE;
98 * Clear the TX filter mask for this STA when sending the next
99 * packet. If the STA went to power save mode, this will happen
100 * when it wakes up for the next time.
102 set_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT);
105 * This code races in the following way:
107 * (1) STA sends frame indicating it will go to sleep and does so
108 * (2) hardware/firmware adds STA to filter list, passes frame up
109 * (3) hardware/firmware processes TX fifo and suppresses a frame
110 * (4) we get TX status before having processed the frame and
111 * knowing that the STA has gone to sleep.
113 * This is actually quite unlikely even when both those events are
114 * processed from interrupts coming in quickly after one another or
115 * even at the same time because we queue both TX status events and
116 * RX frames to be processed by a tasklet and process them in the
117 * same order that they were received or TX status last. Hence, there
118 * is no race as long as the frame RX is processed before the next TX
119 * status, which drivers can ensure, see below.
121 * Note that this can only happen if the hardware or firmware can
122 * actually add STAs to the filter list, if this is done by the
123 * driver in response to set_tim() (which will only reduce the race
124 * this whole filtering tries to solve, not completely solve it)
125 * this situation cannot happen.
127 * To completely solve this race drivers need to make sure that they
128 * (a) don't mix the irq-safe/not irq-safe TX status/RX processing
129 * functions and
130 * (b) always process RX events before TX status events if ordering
131 * can be unknown, for example with different interrupt status
132 * bits.
133 * (c) if PS mode transitions are manual (i.e. the flag
134 * %IEEE80211_HW_AP_LINK_PS is set), always process PS state
135 * changes before calling TX status events if ordering can be
136 * unknown.
138 if (test_sta_flag(sta, WLAN_STA_PS_STA) &&
139 skb_queue_len(&sta->tx_filtered[ac]) < STA_MAX_TX_BUFFER) {
140 skb_queue_tail(&sta->tx_filtered[ac], skb);
141 sta_info_recalc_tim(sta);
143 if (!timer_pending(&local->sta_cleanup))
144 mod_timer(&local->sta_cleanup,
145 round_jiffies(jiffies +
146 STA_INFO_CLEANUP_INTERVAL));
147 return;
150 if (!test_sta_flag(sta, WLAN_STA_PS_STA) &&
151 !(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
152 /* Software retry the packet once */
153 info->flags |= IEEE80211_TX_INTFL_RETRIED;
154 ieee80211_add_pending_skb(local, skb);
155 return;
158 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
159 if (net_ratelimit())
160 wiphy_debug(local->hw.wiphy,
161 "dropped TX filtered frame, queue_len=%d PS=%d @%lu\n",
162 skb_queue_len(&sta->tx_filtered[ac]),
163 !!test_sta_flag(sta, WLAN_STA_PS_STA), jiffies);
164 #endif
165 dev_kfree_skb(skb);
168 static void ieee80211_check_pending_bar(struct sta_info *sta, u8 *addr, u8 tid)
170 struct tid_ampdu_tx *tid_tx;
172 tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
173 if (!tid_tx || !tid_tx->bar_pending)
174 return;
176 tid_tx->bar_pending = false;
177 ieee80211_send_bar(&sta->sdata->vif, addr, tid, tid_tx->failed_bar_ssn);
180 static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb)
182 struct ieee80211_mgmt *mgmt = (void *) skb->data;
183 struct ieee80211_local *local = sta->local;
184 struct ieee80211_sub_if_data *sdata = sta->sdata;
186 if (ieee80211_is_data_qos(mgmt->frame_control)) {
187 struct ieee80211_hdr *hdr = (void *) skb->data;
188 u8 *qc = ieee80211_get_qos_ctl(hdr);
189 u16 tid = qc[0] & 0xf;
191 ieee80211_check_pending_bar(sta, hdr->addr1, tid);
194 if (ieee80211_is_action(mgmt->frame_control) &&
195 sdata->vif.type == NL80211_IFTYPE_STATION &&
196 mgmt->u.action.category == WLAN_CATEGORY_HT &&
197 mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS) {
199 * This update looks racy, but isn't -- if we come
200 * here we've definitely got a station that we're
201 * talking to, and on a managed interface that can
202 * only be the AP. And the only other place updating
203 * this variable is before we're associated.
205 switch (mgmt->u.action.u.ht_smps.smps_control) {
206 case WLAN_HT_SMPS_CONTROL_DYNAMIC:
207 sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_DYNAMIC;
208 break;
209 case WLAN_HT_SMPS_CONTROL_STATIC:
210 sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_STATIC;
211 break;
212 case WLAN_HT_SMPS_CONTROL_DISABLED:
213 default: /* shouldn't happen since we don't send that */
214 sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_OFF;
215 break;
218 ieee80211_queue_work(&local->hw, &local->recalc_smps);
222 static void ieee80211_set_bar_pending(struct sta_info *sta, u8 tid, u16 ssn)
224 struct tid_ampdu_tx *tid_tx;
226 tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
227 if (!tid_tx)
228 return;
230 tid_tx->failed_bar_ssn = ssn;
231 tid_tx->bar_pending = true;
234 static int ieee80211_tx_radiotap_len(struct ieee80211_tx_info *info)
236 int len = sizeof(struct ieee80211_radiotap_header);
238 /* IEEE80211_RADIOTAP_RATE rate */
239 if (info->status.rates[0].idx >= 0 &&
240 !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
241 len += 2;
243 /* IEEE80211_RADIOTAP_TX_FLAGS */
244 len += 2;
246 /* IEEE80211_RADIOTAP_DATA_RETRIES */
247 len += 1;
249 /* IEEE80211_TX_RC_MCS */
250 if (info->status.rates[0].idx >= 0 &&
251 info->status.rates[0].flags & IEEE80211_TX_RC_MCS)
252 len += 3;
254 return len;
257 static void ieee80211_add_tx_radiotap_header(struct ieee80211_supported_band
258 *sband, struct sk_buff *skb,
259 int retry_count, int rtap_len)
261 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
262 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
263 struct ieee80211_radiotap_header *rthdr;
264 unsigned char *pos;
265 u16 txflags;
267 rthdr = (struct ieee80211_radiotap_header *) skb_push(skb, rtap_len);
269 memset(rthdr, 0, rtap_len);
270 rthdr->it_len = cpu_to_le16(rtap_len);
271 rthdr->it_present =
272 cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
273 (1 << IEEE80211_RADIOTAP_DATA_RETRIES));
274 pos = (unsigned char *)(rthdr + 1);
277 * XXX: Once radiotap gets the bitmap reset thing the vendor
278 * extensions proposal contains, we can actually report
279 * the whole set of tries we did.
282 /* IEEE80211_RADIOTAP_RATE */
283 if (info->status.rates[0].idx >= 0 &&
284 !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) {
285 rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_RATE);
286 *pos = sband->bitrates[info->status.rates[0].idx].bitrate / 5;
287 /* padding for tx flags */
288 pos += 2;
291 /* IEEE80211_RADIOTAP_TX_FLAGS */
292 txflags = 0;
293 if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
294 !is_multicast_ether_addr(hdr->addr1))
295 txflags |= IEEE80211_RADIOTAP_F_TX_FAIL;
297 if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
298 (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
299 txflags |= IEEE80211_RADIOTAP_F_TX_CTS;
300 else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
301 txflags |= IEEE80211_RADIOTAP_F_TX_RTS;
303 put_unaligned_le16(txflags, pos);
304 pos += 2;
306 /* IEEE80211_RADIOTAP_DATA_RETRIES */
307 /* for now report the total retry_count */
308 *pos = retry_count;
309 pos++;
311 /* IEEE80211_TX_RC_MCS */
312 if (info->status.rates[0].idx >= 0 &&
313 info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
314 rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_MCS);
315 pos[0] = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
316 IEEE80211_RADIOTAP_MCS_HAVE_GI |
317 IEEE80211_RADIOTAP_MCS_HAVE_BW;
318 if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)
319 pos[1] |= IEEE80211_RADIOTAP_MCS_SGI;
320 if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
321 pos[1] |= IEEE80211_RADIOTAP_MCS_BW_40;
322 if (info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)
323 pos[1] |= IEEE80211_RADIOTAP_MCS_FMT_GF;
324 pos[2] = info->status.rates[0].idx;
325 pos += 3;
331 * Use a static threshold for now, best value to be determined
332 * by testing ...
333 * Should it depend on:
334 * - on # of retransmissions
335 * - current throughput (higher value for higher tpt)?
337 #define STA_LOST_PKT_THRESHOLD 50
339 void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
341 struct sk_buff *skb2;
342 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
343 struct ieee80211_local *local = hw_to_local(hw);
344 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
345 __le16 fc;
346 struct ieee80211_supported_band *sband;
347 struct ieee80211_sub_if_data *sdata;
348 struct net_device *prev_dev = NULL;
349 struct sta_info *sta, *tmp;
350 int retry_count = -1, i;
351 int rates_idx = -1;
352 bool send_to_cooked;
353 bool acked;
354 struct ieee80211_bar *bar;
355 int rtap_len;
357 for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
358 if (info->status.rates[i].idx < 0) {
359 break;
360 } else if (i >= hw->max_report_rates) {
361 /* the HW cannot have attempted that rate */
362 info->status.rates[i].idx = -1;
363 info->status.rates[i].count = 0;
364 break;
367 retry_count += info->status.rates[i].count;
369 rates_idx = i - 1;
371 if (retry_count < 0)
372 retry_count = 0;
374 rcu_read_lock();
376 sband = local->hw.wiphy->bands[info->band];
377 fc = hdr->frame_control;
379 for_each_sta_info(local, hdr->addr1, sta, tmp) {
380 /* skip wrong virtual interface */
381 if (compare_ether_addr(hdr->addr2, sta->sdata->vif.addr))
382 continue;
384 if (info->flags & IEEE80211_TX_STATUS_EOSP)
385 clear_sta_flag(sta, WLAN_STA_SP);
387 acked = !!(info->flags & IEEE80211_TX_STAT_ACK);
388 if (!acked && test_sta_flag(sta, WLAN_STA_PS_STA)) {
390 * The STA is in power save mode, so assume
391 * that this TX packet failed because of that.
393 ieee80211_handle_filtered_frame(local, sta, skb);
394 rcu_read_unlock();
395 return;
398 if ((local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) &&
399 (rates_idx != -1))
400 sta->last_tx_rate = info->status.rates[rates_idx];
402 if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
403 (ieee80211_is_data_qos(fc))) {
404 u16 tid, ssn;
405 u8 *qc;
407 qc = ieee80211_get_qos_ctl(hdr);
408 tid = qc[0] & 0xf;
409 ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
410 & IEEE80211_SCTL_SEQ);
411 ieee80211_send_bar(&sta->sdata->vif, hdr->addr1,
412 tid, ssn);
415 if (!acked && ieee80211_is_back_req(fc)) {
416 u16 tid, control;
419 * BAR failed, store the last SSN and retry sending
420 * the BAR when the next unicast transmission on the
421 * same TID succeeds.
423 bar = (struct ieee80211_bar *) skb->data;
424 control = le16_to_cpu(bar->control);
425 if (!(control & IEEE80211_BAR_CTRL_MULTI_TID)) {
426 u16 ssn = le16_to_cpu(bar->start_seq_num);
428 tid = (control &
429 IEEE80211_BAR_CTRL_TID_INFO_MASK) >>
430 IEEE80211_BAR_CTRL_TID_INFO_SHIFT;
432 ieee80211_set_bar_pending(sta, tid, ssn);
436 if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
437 ieee80211_handle_filtered_frame(local, sta, skb);
438 rcu_read_unlock();
439 return;
440 } else {
441 if (!acked)
442 sta->tx_retry_failed++;
443 sta->tx_retry_count += retry_count;
446 rate_control_tx_status(local, sband, sta, skb);
447 if (ieee80211_vif_is_mesh(&sta->sdata->vif))
448 ieee80211s_update_metric(local, sta, skb);
450 if (!(info->flags & IEEE80211_TX_CTL_INJECTED) && acked)
451 ieee80211_frame_acked(sta, skb);
453 if ((sta->sdata->vif.type == NL80211_IFTYPE_STATION) &&
454 (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
455 ieee80211_sta_tx_notify(sta->sdata, (void *) skb->data, acked);
457 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
458 if (info->flags & IEEE80211_TX_STAT_ACK) {
459 if (sta->lost_packets)
460 sta->lost_packets = 0;
461 } else if (++sta->lost_packets >= STA_LOST_PKT_THRESHOLD) {
462 cfg80211_cqm_pktloss_notify(sta->sdata->dev,
463 sta->sta.addr,
464 sta->lost_packets,
465 GFP_ATOMIC);
466 sta->lost_packets = 0;
471 rcu_read_unlock();
473 ieee80211_led_tx(local, 0);
475 /* SNMP counters
476 * Fragments are passed to low-level drivers as separate skbs, so these
477 * are actually fragments, not frames. Update frame counters only for
478 * the first fragment of the frame. */
479 if (info->flags & IEEE80211_TX_STAT_ACK) {
480 if (ieee80211_is_first_frag(hdr->seq_ctrl)) {
481 local->dot11TransmittedFrameCount++;
482 if (is_multicast_ether_addr(hdr->addr1))
483 local->dot11MulticastTransmittedFrameCount++;
484 if (retry_count > 0)
485 local->dot11RetryCount++;
486 if (retry_count > 1)
487 local->dot11MultipleRetryCount++;
490 /* This counter shall be incremented for an acknowledged MPDU
491 * with an individual address in the address 1 field or an MPDU
492 * with a multicast address in the address 1 field of type Data
493 * or Management. */
494 if (!is_multicast_ether_addr(hdr->addr1) ||
495 ieee80211_is_data(fc) ||
496 ieee80211_is_mgmt(fc))
497 local->dot11TransmittedFragmentCount++;
498 } else {
499 if (ieee80211_is_first_frag(hdr->seq_ctrl))
500 local->dot11FailedCount++;
503 if (ieee80211_is_nullfunc(fc) && ieee80211_has_pm(fc) &&
504 (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
505 !(info->flags & IEEE80211_TX_CTL_INJECTED) &&
506 local->ps_sdata && !(local->scanning)) {
507 if (info->flags & IEEE80211_TX_STAT_ACK) {
508 local->ps_sdata->u.mgd.flags |=
509 IEEE80211_STA_NULLFUNC_ACKED;
510 } else
511 mod_timer(&local->dynamic_ps_timer, jiffies +
512 msecs_to_jiffies(10));
515 if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX) {
516 u64 cookie = (unsigned long)skb;
518 if (ieee80211_is_nullfunc(hdr->frame_control) ||
519 ieee80211_is_qos_nullfunc(hdr->frame_control)) {
520 acked = info->flags & IEEE80211_TX_STAT_ACK;
522 cfg80211_probe_status(skb->dev, hdr->addr1,
523 cookie, acked, GFP_ATOMIC);
524 } else {
525 struct ieee80211_work *wk;
527 rcu_read_lock();
528 list_for_each_entry_rcu(wk, &local->work_list, list) {
529 if (wk->type != IEEE80211_WORK_OFFCHANNEL_TX)
530 continue;
531 if (wk->offchan_tx.frame != skb)
532 continue;
533 wk->offchan_tx.status = true;
534 break;
536 rcu_read_unlock();
537 if (local->hw_roc_skb_for_status == skb) {
538 cookie = local->hw_roc_cookie ^ 2;
539 local->hw_roc_skb_for_status = NULL;
542 cfg80211_mgmt_tx_status(
543 skb->dev, cookie, skb->data, skb->len,
544 !!(info->flags & IEEE80211_TX_STAT_ACK),
545 GFP_ATOMIC);
549 if (unlikely(info->ack_frame_id)) {
550 struct sk_buff *ack_skb;
551 unsigned long flags;
553 spin_lock_irqsave(&local->ack_status_lock, flags);
554 ack_skb = idr_find(&local->ack_status_frames,
555 info->ack_frame_id);
556 if (ack_skb)
557 idr_remove(&local->ack_status_frames,
558 info->ack_frame_id);
559 spin_unlock_irqrestore(&local->ack_status_lock, flags);
561 /* consumes ack_skb */
562 if (ack_skb)
563 skb_complete_wifi_ack(ack_skb,
564 info->flags & IEEE80211_TX_STAT_ACK);
567 /* this was a transmitted frame, but now we want to reuse it */
568 skb_orphan(skb);
570 /* Need to make a copy before skb->cb gets cleared */
571 send_to_cooked = !!(info->flags & IEEE80211_TX_CTL_INJECTED) ||
572 !(ieee80211_is_data(fc));
575 * This is a bit racy but we can avoid a lot of work
576 * with this test...
578 if (!local->monitors && (!send_to_cooked || !local->cooked_mntrs)) {
579 dev_kfree_skb(skb);
580 return;
583 /* send frame to monitor interfaces now */
584 rtap_len = ieee80211_tx_radiotap_len(info);
585 if (WARN_ON_ONCE(skb_headroom(skb) < rtap_len)) {
586 printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
587 dev_kfree_skb(skb);
588 return;
590 ieee80211_add_tx_radiotap_header(sband, skb, retry_count, rtap_len);
592 /* XXX: is this sufficient for BPF? */
593 skb_set_mac_header(skb, 0);
594 skb->ip_summed = CHECKSUM_UNNECESSARY;
595 skb->pkt_type = PACKET_OTHERHOST;
596 skb->protocol = htons(ETH_P_802_2);
597 memset(skb->cb, 0, sizeof(skb->cb));
599 rcu_read_lock();
600 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
601 if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
602 if (!ieee80211_sdata_running(sdata))
603 continue;
605 if ((sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) &&
606 !send_to_cooked)
607 continue;
609 if (prev_dev) {
610 skb2 = skb_clone(skb, GFP_ATOMIC);
611 if (skb2) {
612 skb2->dev = prev_dev;
613 netif_rx(skb2);
617 prev_dev = sdata->dev;
620 if (prev_dev) {
621 skb->dev = prev_dev;
622 netif_rx(skb);
623 skb = NULL;
625 rcu_read_unlock();
626 dev_kfree_skb(skb);
628 EXPORT_SYMBOL(ieee80211_tx_status);
630 void ieee80211_report_low_ack(struct ieee80211_sta *pubsta, u32 num_packets)
632 struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
633 cfg80211_cqm_pktloss_notify(sta->sdata->dev, sta->sta.addr,
634 num_packets, GFP_ATOMIC);
636 EXPORT_SYMBOL(ieee80211_report_low_ack);
638 void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb)
640 struct ieee80211_local *local = hw_to_local(hw);
641 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
643 if (unlikely(info->ack_frame_id)) {
644 struct sk_buff *ack_skb;
645 unsigned long flags;
647 spin_lock_irqsave(&local->ack_status_lock, flags);
648 ack_skb = idr_find(&local->ack_status_frames,
649 info->ack_frame_id);
650 if (ack_skb)
651 idr_remove(&local->ack_status_frames,
652 info->ack_frame_id);
653 spin_unlock_irqrestore(&local->ack_status_lock, flags);
655 /* consumes ack_skb */
656 if (ack_skb)
657 dev_kfree_skb_any(ack_skb);
660 dev_kfree_skb_any(skb);
662 EXPORT_SYMBOL(ieee80211_free_txskb);