drivers/input/touchscreen/penmount.c

   1 /*
   2  * Penmount serial touchscreen driver
   3  *
   4  * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
   5  * Copyright (c) 2011 John Sung <penmount.touch@gmail.com>
   6  *
   7  * Based on ELO driver (drivers/input/touchscreen/elo.c)
   8  * Copyright (c) 2004 Vojtech Pavlik
   9  */
  10
  11 /*
  12  * This program is free software; you can redistribute it and/or modify it
  13  * under the terms of the GNU General Public License version 2 as published
  14  * by the Free Software Foundation.
  15  */
  16
  17 #include <linux/errno.h>
  18 #include <linux/kernel.h>
  19 #include <linux/module.h>
  20 #include <linux/slab.h>
  21 #include <linux/input.h>
  22 #include <linux/input/mt.h>
  23 #include <linux/serio.h>
  24 #include <linux/init.h>
  25
  26 #define DRIVER_DESC     "PenMount serial touchscreen driver"
  27
  28 MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
  29 MODULE_AUTHOR("John Sung <penmount.touch@gmail.com>");
  30 MODULE_DESCRIPTION(DRIVER_DESC);
  31 MODULE_LICENSE("GPL");
  32
  33 /*
  34  * Definitions & global arrays.
  35  */
  36
  37 #define PM_MAX_LENGTH   6
  38 #define PM_MAX_MTSLOT   16
  39 #define PM_3000_MTSLOT  2
  40 #define PM_6250_MTSLOT  12
  41
  42 /*
  43  * Multi-touch slot
  44  */
  45
  46 struct mt_slot {
  47         unsigned short x, y;
  48         bool active; /* is the touch valid? */
  49 };
  50
  51 /*
  52  * Per-touchscreen data.
  53  */
  54
  55 struct pm {
  56         struct input_dev *dev;
  57         struct serio *serio;
  58         int idx;
  59         unsigned char data[PM_MAX_LENGTH];
  60         char phys[32];
  61         unsigned char packetsize;
  62         unsigned char maxcontacts;
  63         struct mt_slot slots[PM_MAX_MTSLOT];
  64         void (*parse_packet)(struct pm *);
  65 };
  66
  67 /*
  68  * pm_mtevent() sends mt events and also emulates pointer movement
  69  */
  70
  71 static void pm_mtevent(struct pm *pm, struct input_dev *input)
  72 {
  73         int i;
  74
  75         for (i = 0; i < pm->maxcontacts; ++i) {
  76                 input_mt_slot(input, i);
  77                 input_mt_report_slot_state(input, MT_TOOL_FINGER,
  78                                 pm->slots[i].active);
  79                 if (pm->slots[i].active) {
  80                         input_event(input, EV_ABS, ABS_MT_POSITION_X, pm->slots[i].x);
  81                         input_event(input, EV_ABS, ABS_MT_POSITION_Y, pm->slots[i].y);
  82                 }
  83         }
  84
  85         input_mt_report_pointer_emulation(input, true);
  86         input_sync(input);
  87 }
  88
  89 /*
  90  * pm_checkpacket() checks if data packet is valid
  91  */
  92
  93 static bool pm_checkpacket(unsigned char *packet)
  94 {
  95         int total = 0;
  96         int i;
  97
  98         for (i = 0; i < 5; i++)
  99                 total += packet[i];
 100
 101         return packet[5] == (unsigned char)~(total & 0xff);
 102 }
 103
 104 static void pm_parse_9000(struct pm *pm)
 105 {
 106         struct input_dev *dev = pm->dev;
 107
 108         if ((pm->data[0] & 0x80) && pm->packetsize == ++pm->idx) {
 109                 input_report_abs(dev, ABS_X, pm->data[1] * 128 + pm->data[2]);
 110                 input_report_abs(dev, ABS_Y, pm->data[3] * 128 + pm->data[4]);
 111                 input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
 112                 input_sync(dev);
 113                 pm->idx = 0;
 114         }
 115 }
 116
 117 static void pm_parse_6000(struct pm *pm)
 118 {
 119         struct input_dev *dev = pm->dev;
 120
 121         if ((pm->data[0] & 0xbf) == 0x30 && pm->packetsize == ++pm->idx) {
 122                 if (pm_checkpacket(pm->data)) {
 123                         input_report_abs(dev, ABS_X,
 124                                         pm->data[2] * 256 + pm->data[1]);
 125                         input_report_abs(dev, ABS_Y,
 126                                         pm->data[4] * 256 + pm->data[3]);
 127                         input_report_key(dev, BTN_TOUCH, pm->data[0] & 0x40);
 128                         input_sync(dev);
 129                 }
 130                 pm->idx = 0;
 131         }
 132 }
 133
 134 static void pm_parse_3000(struct pm *pm)
 135 {
 136         struct input_dev *dev = pm->dev;
 137
 138         if ((pm->data[0] & 0xce) == 0x40 && pm->packetsize == ++pm->idx) {
 139                 if (pm_checkpacket(pm->data)) {
 140                         int slotnum = pm->data[0] & 0x0f;
 141                         pm->slots[slotnum].active = pm->data[0] & 0x30;
 142                         pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1];
 143                         pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3];
 144                         pm_mtevent(pm, dev);
 145                 }
 146                 pm->idx = 0;
 147         }
 148 }
 149
 150 static void pm_parse_6250(struct pm *pm)
 151 {
 152         struct input_dev *dev = pm->dev;
 153
 154         if ((pm->data[0] & 0xb0) == 0x30 && pm->packetsize == ++pm->idx) {
 155                 if (pm_checkpacket(pm->data)) {
 156                         int slotnum = pm->data[0] & 0x0f;
 157                         pm->slots[slotnum].active = pm->data[0] & 0x40;
 158                         pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1];
 159                         pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3];
 160                         pm_mtevent(pm, dev);
 161                 }
 162                 pm->idx = 0;
 163         }
 164 }
 165
 166 static irqreturn_t pm_interrupt(struct serio *serio,
 167                 unsigned char data, unsigned int flags)
 168 {
 169         struct pm *pm = serio_get_drvdata(serio);
 170
 171         pm->data[pm->idx] = data;
 172
 173         pm->parse_packet(pm);
 174
 175         return IRQ_HANDLED;
 176 }
 177
 178 /*
 179  * pm_disconnect() is the opposite of pm_connect()
 180  */
 181
 182 static void pm_disconnect(struct serio *serio)
 183 {
 184         struct pm *pm = serio_get_drvdata(serio);
 185
 186         serio_close(serio);
 187
 188         input_unregister_device(pm->dev);
 189         kfree(pm);
 190
 191         serio_set_drvdata(serio, NULL);
 192 }
 193
 194 /*
 195  * pm_connect() is the routine that is called when someone adds a
 196  * new serio device that supports PenMount protocol and registers it as
 197  * an input device.
 198  */
 199
 200 static int pm_connect(struct serio *serio, struct serio_driver *drv)
 201 {
 202         struct pm *pm;
 203         struct input_dev *input_dev;
 204         int max_x, max_y;
 205         int err;
 206
 207         pm = kzalloc(sizeof(struct pm), GFP_KERNEL);
 208         input_dev = input_allocate_device();
 209         if (!pm || !input_dev) {
 210                 err = -ENOMEM;
 211                 goto fail1;
 212         }
 213
 214         pm->serio = serio;
 215         pm->dev = input_dev;
 216         snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
 217         pm->maxcontacts = 1;
 218
 219         input_dev->name = "PenMount Serial TouchScreen";
 220         input_dev->phys = pm->phys;
 221         input_dev->id.bustype = BUS_RS232;
 222         input_dev->id.vendor = SERIO_PENMOUNT;
 223         input_dev->id.product = 0;
 224         input_dev->id.version = 0x0100;
 225         input_dev->dev.parent = &serio->dev;
 226
 227         input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 228         input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 229
 230         switch (serio->id.id) {
 231         default:
 232         case 0:
 233                 pm->packetsize = 5;
 234                 pm->parse_packet = pm_parse_9000;
 235                 input_dev->id.product = 0x9000;
 236                 max_x = max_y = 0x3ff;
 237                 break;
 238
 239         case 1:
 240                 pm->packetsize = 6;
 241                 pm->parse_packet = pm_parse_6000;
 242                 input_dev->id.product = 0x6000;
 243                 max_x = max_y = 0x3ff;
 244                 break;
 245
 246         case 2:
 247                 pm->packetsize = 6;
 248                 pm->parse_packet = pm_parse_3000;
 249                 input_dev->id.product = 0x3000;
 250                 max_x = max_y = 0x7ff;
 251                 pm->maxcontacts = PM_3000_MTSLOT;
 252                 break;
 253
 254         case 3:
 255                 pm->packetsize = 6;
 256                 pm->parse_packet = pm_parse_6250;
 257                 input_dev->id.product = 0x6250;
 258                 max_x = max_y = 0x3ff;
 259                 pm->maxcontacts = PM_6250_MTSLOT;
 260                 break;
 261         }
 262
 263         input_set_abs_params(pm->dev, ABS_X, 0, max_x, 0, 0);
 264         input_set_abs_params(pm->dev, ABS_Y, 0, max_y, 0, 0);
 265
 266         if (pm->maxcontacts > 1) {
 267                 input_mt_init_slots(pm->dev, pm->maxcontacts, 0);
 268                 input_set_abs_params(pm->dev,
 269                                      ABS_MT_POSITION_X, 0, max_x, 0, 0);
 270                 input_set_abs_params(pm->dev,
 271                                      ABS_MT_POSITION_Y, 0, max_y, 0, 0);
 272         }
 273
 274         serio_set_drvdata(serio, pm);
 275
 276         err = serio_open(serio, drv);
 277         if (err)
 278                 goto fail2;
 279
 280         err = input_register_device(pm->dev);
 281         if (err)
 282                 goto fail3;
 283
 284         return 0;
 285
 286  fail3: serio_close(serio);
 287  fail2: serio_set_drvdata(serio, NULL);
 288  fail1: input_free_device(input_dev);
 289         kfree(pm);
 290         return err;
 291 }
 292
 293 /*
 294  * The serio driver structure.
 295  */
 296
 297 static struct serio_device_id pm_serio_ids[] = {
 298         {
 299                 .type   = SERIO_RS232,
 300                 .proto  = SERIO_PENMOUNT,
 301                 .id     = SERIO_ANY,
 302                 .extra  = SERIO_ANY,
 303         },
 304         { 0 }
 305 };
 306
 307 MODULE_DEVICE_TABLE(serio, pm_serio_ids);
 308
 309 static struct serio_driver pm_drv = {
 310         .driver         = {
 311                 .name   = "serio-penmount",
 312         },
 313         .description    = DRIVER_DESC,
 314         .id_table       = pm_serio_ids,
 315         .interrupt      = pm_interrupt,
 316         .connect        = pm_connect,
 317         .disconnect     = pm_disconnect,
 318 };
 319
 320 module_serio_driver(pm_drv);