Merge tag 'gpio-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
[linux-2.6.git] / drivers / hwmon / adt7x10.c
blob98141f4831651a216230e40e27bd284cf7fff8b9
1 /*
2 * adt7x10.c - Part of lm_sensors, Linux kernel modules for hardware
3 * monitoring
4 * This driver handles the ADT7410 and compatible digital temperature sensors.
5 * Hartmut Knaack <knaack.h@gmx.de> 2012-07-22
6 * based on lm75.c by Frodo Looijaard <frodol@dds.nl>
7 * and adt7410.c from iio-staging by Sonic Zhang <sonic.zhang@analog.com>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/hwmon.h>
29 #include <linux/hwmon-sysfs.h>
30 #include <linux/err.h>
31 #include <linux/mutex.h>
32 #include <linux/delay.h>
33 #include <linux/interrupt.h>
35 #include "adt7x10.h"
38 * ADT7X10 status
40 #define ADT7X10_STAT_T_LOW (1 << 4)
41 #define ADT7X10_STAT_T_HIGH (1 << 5)
42 #define ADT7X10_STAT_T_CRIT (1 << 6)
43 #define ADT7X10_STAT_NOT_RDY (1 << 7)
46 * ADT7X10 config
48 #define ADT7X10_FAULT_QUEUE_MASK (1 << 0 | 1 << 1)
49 #define ADT7X10_CT_POLARITY (1 << 2)
50 #define ADT7X10_INT_POLARITY (1 << 3)
51 #define ADT7X10_EVENT_MODE (1 << 4)
52 #define ADT7X10_MODE_MASK (1 << 5 | 1 << 6)
53 #define ADT7X10_FULL (0 << 5 | 0 << 6)
54 #define ADT7X10_PD (1 << 5 | 1 << 6)
55 #define ADT7X10_RESOLUTION (1 << 7)
58 * ADT7X10 masks
60 #define ADT7X10_T13_VALUE_MASK 0xFFF8
61 #define ADT7X10_T_HYST_MASK 0xF
63 /* straight from the datasheet */
64 #define ADT7X10_TEMP_MIN (-55000)
65 #define ADT7X10_TEMP_MAX 150000
67 /* Each client has this additional data */
68 struct adt7x10_data {
69 const struct adt7x10_ops *ops;
70 const char *name;
71 struct device *hwmon_dev;
72 struct mutex update_lock;
73 u8 config;
74 u8 oldconfig;
75 bool valid; /* true if registers valid */
76 unsigned long last_updated; /* In jiffies */
77 s16 temp[4]; /* Register values,
78 0 = input
79 1 = high
80 2 = low
81 3 = critical */
82 u8 hyst; /* hysteresis offset */
85 static int adt7x10_read_byte(struct device *dev, u8 reg)
87 struct adt7x10_data *d = dev_get_drvdata(dev);
88 return d->ops->read_byte(dev, reg);
91 static int adt7x10_write_byte(struct device *dev, u8 reg, u8 data)
93 struct adt7x10_data *d = dev_get_drvdata(dev);
94 return d->ops->write_byte(dev, reg, data);
97 static int adt7x10_read_word(struct device *dev, u8 reg)
99 struct adt7x10_data *d = dev_get_drvdata(dev);
100 return d->ops->read_word(dev, reg);
103 static int adt7x10_write_word(struct device *dev, u8 reg, u16 data)
105 struct adt7x10_data *d = dev_get_drvdata(dev);
106 return d->ops->write_word(dev, reg, data);
109 static const u8 ADT7X10_REG_TEMP[4] = {
110 ADT7X10_TEMPERATURE, /* input */
111 ADT7X10_T_ALARM_HIGH, /* high */
112 ADT7X10_T_ALARM_LOW, /* low */
113 ADT7X10_T_CRIT, /* critical */
116 static irqreturn_t adt7x10_irq_handler(int irq, void *private)
118 struct device *dev = private;
119 int status;
121 status = adt7x10_read_byte(dev, ADT7X10_STATUS);
122 if (status < 0)
123 return IRQ_HANDLED;
125 if (status & ADT7X10_STAT_T_HIGH)
126 sysfs_notify(&dev->kobj, NULL, "temp1_max_alarm");
127 if (status & ADT7X10_STAT_T_LOW)
128 sysfs_notify(&dev->kobj, NULL, "temp1_min_alarm");
129 if (status & ADT7X10_STAT_T_CRIT)
130 sysfs_notify(&dev->kobj, NULL, "temp1_crit_alarm");
132 return IRQ_HANDLED;
135 static int adt7x10_temp_ready(struct device *dev)
137 int i, status;
139 for (i = 0; i < 6; i++) {
140 status = adt7x10_read_byte(dev, ADT7X10_STATUS);
141 if (status < 0)
142 return status;
143 if (!(status & ADT7X10_STAT_NOT_RDY))
144 return 0;
145 msleep(60);
147 return -ETIMEDOUT;
150 static int adt7x10_update_temp(struct device *dev)
152 struct adt7x10_data *data = dev_get_drvdata(dev);
153 int ret = 0;
155 mutex_lock(&data->update_lock);
157 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
158 || !data->valid) {
159 int temp;
161 dev_dbg(dev, "Starting update\n");
163 ret = adt7x10_temp_ready(dev); /* check for new value */
164 if (ret)
165 goto abort;
167 temp = adt7x10_read_word(dev, ADT7X10_REG_TEMP[0]);
168 if (temp < 0) {
169 ret = temp;
170 dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
171 ADT7X10_REG_TEMP[0], ret);
172 goto abort;
174 data->temp[0] = temp;
175 data->last_updated = jiffies;
176 data->valid = true;
179 abort:
180 mutex_unlock(&data->update_lock);
181 return ret;
184 static int adt7x10_fill_cache(struct device *dev)
186 struct adt7x10_data *data = dev_get_drvdata(dev);
187 int ret;
188 int i;
190 for (i = 1; i < ARRAY_SIZE(data->temp); i++) {
191 ret = adt7x10_read_word(dev, ADT7X10_REG_TEMP[i]);
192 if (ret < 0) {
193 dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
194 ADT7X10_REG_TEMP[i], ret);
195 return ret;
197 data->temp[i] = ret;
200 ret = adt7x10_read_byte(dev, ADT7X10_T_HYST);
201 if (ret < 0) {
202 dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
203 ADT7X10_T_HYST, ret);
204 return ret;
206 data->hyst = ret;
208 return 0;
211 static s16 ADT7X10_TEMP_TO_REG(long temp)
213 return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7X10_TEMP_MIN,
214 ADT7X10_TEMP_MAX) * 128, 1000);
217 static int ADT7X10_REG_TO_TEMP(struct adt7x10_data *data, s16 reg)
219 /* in 13 bit mode, bits 0-2 are status flags - mask them out */
220 if (!(data->config & ADT7X10_RESOLUTION))
221 reg &= ADT7X10_T13_VALUE_MASK;
223 * temperature is stored in twos complement format, in steps of
224 * 1/128°C
226 return DIV_ROUND_CLOSEST(reg * 1000, 128);
229 /*-----------------------------------------------------------------------*/
231 /* sysfs attributes for hwmon */
233 static ssize_t adt7x10_show_temp(struct device *dev,
234 struct device_attribute *da,
235 char *buf)
237 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
238 struct adt7x10_data *data = dev_get_drvdata(dev);
241 if (attr->index == 0) {
242 int ret;
244 ret = adt7x10_update_temp(dev);
245 if (ret)
246 return ret;
249 return sprintf(buf, "%d\n", ADT7X10_REG_TO_TEMP(data,
250 data->temp[attr->index]));
253 static ssize_t adt7x10_set_temp(struct device *dev,
254 struct device_attribute *da,
255 const char *buf, size_t count)
257 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
258 struct adt7x10_data *data = dev_get_drvdata(dev);
259 int nr = attr->index;
260 long temp;
261 int ret;
263 ret = kstrtol(buf, 10, &temp);
264 if (ret)
265 return ret;
267 mutex_lock(&data->update_lock);
268 data->temp[nr] = ADT7X10_TEMP_TO_REG(temp);
269 ret = adt7x10_write_word(dev, ADT7X10_REG_TEMP[nr], data->temp[nr]);
270 if (ret)
271 count = ret;
272 mutex_unlock(&data->update_lock);
273 return count;
276 static ssize_t adt7x10_show_t_hyst(struct device *dev,
277 struct device_attribute *da,
278 char *buf)
280 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
281 struct adt7x10_data *data = dev_get_drvdata(dev);
282 int nr = attr->index;
283 int hyst;
285 hyst = (data->hyst & ADT7X10_T_HYST_MASK) * 1000;
288 * hysteresis is stored as a 4 bit offset in the device, convert it
289 * to an absolute value
291 if (nr == 2) /* min has positive offset, others have negative */
292 hyst = -hyst;
293 return sprintf(buf, "%d\n",
294 ADT7X10_REG_TO_TEMP(data, data->temp[nr]) - hyst);
297 static ssize_t adt7x10_set_t_hyst(struct device *dev,
298 struct device_attribute *da,
299 const char *buf, size_t count)
301 struct adt7x10_data *data = dev_get_drvdata(dev);
302 int limit, ret;
303 long hyst;
305 ret = kstrtol(buf, 10, &hyst);
306 if (ret)
307 return ret;
308 /* convert absolute hysteresis value to a 4 bit delta value */
309 limit = ADT7X10_REG_TO_TEMP(data, data->temp[1]);
310 hyst = clamp_val(hyst, ADT7X10_TEMP_MIN, ADT7X10_TEMP_MAX);
311 data->hyst = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000),
312 0, ADT7X10_T_HYST_MASK);
313 ret = adt7x10_write_byte(dev, ADT7X10_T_HYST, data->hyst);
314 if (ret)
315 return ret;
317 return count;
320 static ssize_t adt7x10_show_alarm(struct device *dev,
321 struct device_attribute *da,
322 char *buf)
324 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
325 int ret;
327 ret = adt7x10_read_byte(dev, ADT7X10_STATUS);
328 if (ret < 0)
329 return ret;
331 return sprintf(buf, "%d\n", !!(ret & attr->index));
334 static ssize_t adt7x10_show_name(struct device *dev,
335 struct device_attribute *da,
336 char *buf)
338 struct adt7x10_data *data = dev_get_drvdata(dev);
340 return sprintf(buf, "%s\n", data->name);
343 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adt7x10_show_temp, NULL, 0);
344 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
345 adt7x10_show_temp, adt7x10_set_temp, 1);
346 static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
347 adt7x10_show_temp, adt7x10_set_temp, 2);
348 static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
349 adt7x10_show_temp, adt7x10_set_temp, 3);
350 static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
351 adt7x10_show_t_hyst, adt7x10_set_t_hyst, 1);
352 static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO,
353 adt7x10_show_t_hyst, NULL, 2);
354 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
355 adt7x10_show_t_hyst, NULL, 3);
356 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, adt7x10_show_alarm,
357 NULL, ADT7X10_STAT_T_LOW);
358 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adt7x10_show_alarm,
359 NULL, ADT7X10_STAT_T_HIGH);
360 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, adt7x10_show_alarm,
361 NULL, ADT7X10_STAT_T_CRIT);
362 static DEVICE_ATTR(name, S_IRUGO, adt7x10_show_name, NULL);
364 static struct attribute *adt7x10_attributes[] = {
365 &sensor_dev_attr_temp1_input.dev_attr.attr,
366 &sensor_dev_attr_temp1_max.dev_attr.attr,
367 &sensor_dev_attr_temp1_min.dev_attr.attr,
368 &sensor_dev_attr_temp1_crit.dev_attr.attr,
369 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
370 &sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
371 &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
372 &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
373 &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
374 &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
375 NULL
378 static const struct attribute_group adt7x10_group = {
379 .attrs = adt7x10_attributes,
382 int adt7x10_probe(struct device *dev, const char *name, int irq,
383 const struct adt7x10_ops *ops)
385 struct adt7x10_data *data;
386 int ret;
388 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
389 if (!data)
390 return -ENOMEM;
392 data->ops = ops;
393 data->name = name;
395 dev_set_drvdata(dev, data);
396 mutex_init(&data->update_lock);
398 /* configure as specified */
399 ret = adt7x10_read_byte(dev, ADT7X10_CONFIG);
400 if (ret < 0) {
401 dev_dbg(dev, "Can't read config? %d\n", ret);
402 return ret;
404 data->oldconfig = ret;
407 * Set to 16 bit resolution, continous conversion and comparator mode.
409 data->config = data->oldconfig;
410 data->config &= ~(ADT7X10_MODE_MASK | ADT7X10_CT_POLARITY |
411 ADT7X10_INT_POLARITY);
412 data->config |= ADT7X10_FULL | ADT7X10_RESOLUTION | ADT7X10_EVENT_MODE;
414 if (data->config != data->oldconfig) {
415 ret = adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config);
416 if (ret)
417 return ret;
419 dev_dbg(dev, "Config %02x\n", data->config);
421 ret = adt7x10_fill_cache(dev);
422 if (ret)
423 goto exit_restore;
425 /* Register sysfs hooks */
426 ret = sysfs_create_group(&dev->kobj, &adt7x10_group);
427 if (ret)
428 goto exit_restore;
431 * The I2C device will already have it's own 'name' attribute, but for
432 * the SPI device we need to register it. name will only be non NULL if
433 * the device doesn't register the 'name' attribute on its own.
435 if (name) {
436 ret = device_create_file(dev, &dev_attr_name);
437 if (ret)
438 goto exit_remove;
441 data->hwmon_dev = hwmon_device_register(dev);
442 if (IS_ERR(data->hwmon_dev)) {
443 ret = PTR_ERR(data->hwmon_dev);
444 goto exit_remove_name;
447 if (irq > 0) {
448 ret = request_threaded_irq(irq, NULL, adt7x10_irq_handler,
449 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
450 dev_name(dev), dev);
451 if (ret)
452 goto exit_hwmon_device_unregister;
455 return 0;
457 exit_hwmon_device_unregister:
458 hwmon_device_unregister(data->hwmon_dev);
459 exit_remove_name:
460 if (name)
461 device_remove_file(dev, &dev_attr_name);
462 exit_remove:
463 sysfs_remove_group(&dev->kobj, &adt7x10_group);
464 exit_restore:
465 adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig);
466 return ret;
468 EXPORT_SYMBOL_GPL(adt7x10_probe);
470 int adt7x10_remove(struct device *dev, int irq)
472 struct adt7x10_data *data = dev_get_drvdata(dev);
474 if (irq > 0)
475 free_irq(irq, dev);
477 hwmon_device_unregister(data->hwmon_dev);
478 if (data->name)
479 device_remove_file(dev, &dev_attr_name);
480 sysfs_remove_group(&dev->kobj, &adt7x10_group);
481 if (data->oldconfig != data->config)
482 adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig);
483 return 0;
485 EXPORT_SYMBOL_GPL(adt7x10_remove);
487 #ifdef CONFIG_PM_SLEEP
489 static int adt7x10_suspend(struct device *dev)
491 struct adt7x10_data *data = dev_get_drvdata(dev);
493 return adt7x10_write_byte(dev, ADT7X10_CONFIG,
494 data->config | ADT7X10_PD);
497 static int adt7x10_resume(struct device *dev)
499 struct adt7x10_data *data = dev_get_drvdata(dev);
501 return adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config);
504 SIMPLE_DEV_PM_OPS(adt7x10_dev_pm_ops, adt7x10_suspend, adt7x10_resume);
505 EXPORT_SYMBOL_GPL(adt7x10_dev_pm_ops);
507 #endif /* CONFIG_PM_SLEEP */
509 MODULE_AUTHOR("Hartmut Knaack");
510 MODULE_DESCRIPTION("ADT7410/ADT7420, ADT7310/ADT7320 common code");
511 MODULE_LICENSE("GPL");