Merge tag 'gpio-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...

[linux-2.6.git] / arch / x86 / kernel / microcode_intel.c

/*
 *      Intel CPU Microcode Update Driver for Linux
 *
 *      Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
 *                    2006      Shaohua Li <shaohua.li@intel.com>
 *
 *      This driver allows to upgrade microcode on Intel processors
 *      belonging to IA-32 family - PentiumPro, Pentium II,
 *      Pentium III, Xeon, Pentium 4, etc.
 *
 *      Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
 *      Software Developer's Manual
 *      Order Number 253668 or free download from:
 *
 *      http://developer.intel.com/Assets/PDF/manual/253668.pdf 
 *
 *      For more information, go to http://www.urbanmyth.org/microcode
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 *
 *      1.0     16 Feb 2000, Tigran Aivazian <tigran@sco.com>
 *              Initial release.
 *      1.01    18 Feb 2000, Tigran Aivazian <tigran@sco.com>
 *              Added read() support + cleanups.
 *      1.02    21 Feb 2000, Tigran Aivazian <tigran@sco.com>
 *              Added 'device trimming' support. open(O_WRONLY) zeroes
 *              and frees the saved copy of applied microcode.
 *      1.03    29 Feb 2000, Tigran Aivazian <tigran@sco.com>
 *              Made to use devfs (/dev/cpu/microcode) + cleanups.
 *      1.04    06 Jun 2000, Simon Trimmer <simon@veritas.com>
 *              Added misc device support (now uses both devfs and misc).
 *              Added MICROCODE_IOCFREE ioctl to clear memory.
 *      1.05    09 Jun 2000, Simon Trimmer <simon@veritas.com>
 *              Messages for error cases (non Intel & no suitable microcode).
 *      1.06    03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
 *              Removed ->release(). Removed exclusive open and status bitmap.
 *              Added microcode_rwsem to serialize read()/write()/ioctl().
 *              Removed global kernel lock usage.
 *      1.07    07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
 *              Write 0 to 0x8B msr and then cpuid before reading revision,
 *              so that it works even if there were no update done by the
 *              BIOS. Otherwise, reading from 0x8B gives junk (which happened
 *              to be 0 on my machine which is why it worked even when I
 *              disabled update by the BIOS)
 *              Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
 *      1.08    11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
 *                           Tigran Aivazian <tigran@veritas.com>
 *              Intel Pentium 4 processor support and bugfixes.
 *      1.09    30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
 *              Bugfix for HT (Hyper-Threading) enabled processors
 *              whereby processor resources are shared by all logical processors
 *              in a single CPU package.
 *      1.10    28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
 *              Tigran Aivazian <tigran@veritas.com>,
 *              Serialize updates as required on HT processors due to
 *              speculative nature of implementation.
 *      1.11    22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
 *              Fix the panic when writing zero-length microcode chunk.
 *      1.12    29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
 *              Jun Nakajima <jun.nakajima@intel.com>
 *              Support for the microcode updates in the new format.
 *      1.13    10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
 *              Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
 *              because we no longer hold a copy of applied microcode
 *              in kernel memory.
 *      1.14    25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
 *              Fix sigmatch() macro to handle old CPUs with pf == 0.
 *              Thanks to Stuart Swales for pointing out this bug.
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/firmware.h>
#include <linux/uaccess.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/vmalloc.h>

#include <asm/microcode_intel.h>
#include <asm/processor.h>
#include <asm/msr.h>

MODULE_DESCRIPTION("Microcode Update Driver");
MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
MODULE_LICENSE("GPL");

static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
{
        struct cpuinfo_x86 *c = &cpu_data(cpu_num);
        unsigned int val[2];

        memset(csig, 0, sizeof(*csig));

        csig->sig = cpuid_eax(0x00000001);

        if ((c->x86_model >= 5) || (c->x86 > 6)) {
                /* get processor flags from MSR 0x17 */
                rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
                csig->pf = 1 << ((val[1] >> 18) & 7);
        }

        csig->rev = c->microcode;
        pr_info("CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n",
                cpu_num, csig->sig, csig->pf, csig->rev);

        return 0;
}

/*
 * return 0 - no update found
 * return 1 - found update
 */
static int get_matching_mc(struct microcode_intel *mc_intel, int cpu)
{
        struct cpu_signature cpu_sig;
        unsigned int csig, cpf, crev;

        collect_cpu_info(cpu, &cpu_sig);

        csig = cpu_sig.sig;
        cpf = cpu_sig.pf;
        crev = cpu_sig.rev;

        return get_matching_microcode(csig, cpf, mc_intel, crev);
}

int apply_microcode(int cpu)
{
        struct microcode_intel *mc_intel;
        struct ucode_cpu_info *uci;
        unsigned int val[2];
        int cpu_num = raw_smp_processor_id();
        struct cpuinfo_x86 *c = &cpu_data(cpu_num);

        uci = ucode_cpu_info + cpu;
        mc_intel = uci->mc;

        /* We should bind the task to the CPU */
        BUG_ON(cpu_num != cpu);

        if (mc_intel == NULL)
                return 0;

        /*
         * Microcode on this CPU could be updated earlier. Only apply the
         * microcode patch in mc_intel when it is newer than the one on this
         * CPU.
         */
        if (get_matching_mc(mc_intel, cpu) == 0)
                return 0;

        /* write microcode via MSR 0x79 */
        wrmsr(MSR_IA32_UCODE_WRITE,
              (unsigned long) mc_intel->bits,
              (unsigned long) mc_intel->bits >> 16 >> 16);
        wrmsr(MSR_IA32_UCODE_REV, 0, 0);

        /* As documented in the SDM: Do a CPUID 1 here */
        sync_core();

        /* get the current revision from MSR 0x8B */
        rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);

        if (val[1] != mc_intel->hdr.rev) {
                pr_err("CPU%d update to revision 0x%x failed\n",
                       cpu_num, mc_intel->hdr.rev);
                return -1;
        }
        pr_info("CPU%d updated to revision 0x%x, date = %04x-%02x-%02x\n",
                cpu_num, val[1],
                mc_intel->hdr.date & 0xffff,
                mc_intel->hdr.date >> 24,
                (mc_intel->hdr.date >> 16) & 0xff);

        uci->cpu_sig.rev = val[1];
        c->microcode = val[1];

        return 0;
}

static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
                                int (*get_ucode_data)(void *, const void *, size_t))
{
        struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
        u8 *ucode_ptr = data, *new_mc = NULL, *mc = NULL;
        int new_rev = uci->cpu_sig.rev;
        unsigned int leftover = size;
        enum ucode_state state = UCODE_OK;
        unsigned int curr_mc_size = 0;
        unsigned int csig, cpf;

        while (leftover) {
                struct microcode_header_intel mc_header;
                unsigned int mc_size;

                if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
                        break;

                mc_size = get_totalsize(&mc_header);
                if (!mc_size || mc_size > leftover) {
                        pr_err("error! Bad data in microcode data file\n");
                        break;
                }

                /* For performance reasons, reuse mc area when possible */
                if (!mc || mc_size > curr_mc_size) {
                        vfree(mc);
                        mc = vmalloc(mc_size);
                        if (!mc)
                                break;
                        curr_mc_size = mc_size;
                }

                if (get_ucode_data(mc, ucode_ptr, mc_size) ||
                    microcode_sanity_check(mc, 1) < 0) {
                        break;
                }

                csig = uci->cpu_sig.sig;
                cpf = uci->cpu_sig.pf;
                if (get_matching_microcode(csig, cpf, mc, new_rev)) {
                        vfree(new_mc);
                        new_rev = mc_header.rev;
                        new_mc  = mc;
                        mc = NULL;      /* trigger new vmalloc */
                }

                ucode_ptr += mc_size;
                leftover  -= mc_size;
        }

        vfree(mc);

        if (leftover) {
                vfree(new_mc);
                state = UCODE_ERROR;
                goto out;
        }

        if (!new_mc) {
                state = UCODE_NFOUND;
                goto out;
        }

        vfree(uci->mc);
        uci->mc = (struct microcode_intel *)new_mc;

        /*
         * If early loading microcode is supported, save this mc into
         * permanent memory. So it will be loaded early when a CPU is hot added
         * or resumes.
         */
        save_mc_for_early(new_mc);

        pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
                 cpu, new_rev, uci->cpu_sig.rev);
out:
        return state;
}

static int get_ucode_fw(void *to, const void *from, size_t n)
{
        memcpy(to, from, n);
        return 0;
}

static enum ucode_state request_microcode_fw(int cpu, struct device *device,
                                             bool refresh_fw)
{
        char name[30];
        struct cpuinfo_x86 *c = &cpu_data(cpu);
        const struct firmware *firmware;
        enum ucode_state ret;

        sprintf(name, "intel-ucode/%02x-%02x-%02x",
                c->x86, c->x86_model, c->x86_mask);

        if (request_firmware(&firmware, name, device)) {
                pr_debug("data file %s load failed\n", name);
                return UCODE_NFOUND;
        }

        ret = generic_load_microcode(cpu, (void *)firmware->data,
                                     firmware->size, &get_ucode_fw);

        release_firmware(firmware);

        return ret;
}

static int get_ucode_user(void *to, const void *from, size_t n)
{
        return copy_from_user(to, from, n);
}

static enum ucode_state
request_microcode_user(int cpu, const void __user *buf, size_t size)
{
        return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user);
}

static void microcode_fini_cpu(int cpu)
{
        struct ucode_cpu_info *uci = ucode_cpu_info + cpu;

        vfree(uci->mc);
        uci->mc = NULL;
}

static struct microcode_ops microcode_intel_ops = {
        .request_microcode_user           = request_microcode_user,
        .request_microcode_fw             = request_microcode_fw,
        .collect_cpu_info                 = collect_cpu_info,
        .apply_microcode                  = apply_microcode,
        .microcode_fini_cpu               = microcode_fini_cpu,
};

struct microcode_ops * __init init_intel_microcode(void)
{
        struct cpuinfo_x86 *c = &cpu_data(0);

        if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
            cpu_has(c, X86_FEATURE_IA64)) {
                pr_err("Intel CPU family 0x%x not supported\n", c->x86);
                return NULL;
        }

        return &microcode_intel_ops;
}