?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Remove all #inclusions of asm/system.h
[linux-2.6.git] / drivers / tty / serial / 8250 / serial_cs.c
blob29b695d041ecd45cdfe18914b8c02d10ff7f79a5
1 /*======================================================================
2
3 A driver for PCMCIA serial devices
4
5 serial_cs.c 1.134 2002/05/04 05:48:53
6
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
11
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
16
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
31
32 ======================================================================*/
33
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/ptrace.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 #include <linux/timer.h>
42 #include <linux/serial_core.h>
43 #include <linux/delay.h>
44 #include <linux/major.h>
45 #include <asm/io.h>
46
47 #include <pcmcia/cistpl.h>
48 #include <pcmcia/ciscode.h>
49 #include <pcmcia/ds.h>
50 #include <pcmcia/cisreg.h>
51
52 #include "8250.h"
53
54
55 /*====================================================================*/
56
57 /* Parameters that can be set with 'insmod' */
58
59 /* Enable the speaker? */
60 static int do_sound = 1;
61 /* Skip strict UART tests? */
62 static int buggy_uart;
63
64 module_param(do_sound, int, 0444);
65 module_param(buggy_uart, int, 0444);
66
67 /*====================================================================*/
68
69 /* Table of multi-port card ID's */
70
71 struct serial_quirk {
72 unsigned int manfid;
73 unsigned int prodid;
74 int multi; /* 1 = multifunction, > 1 = # ports */
75 void (*config)(struct pcmcia_device *);
76 void (*setup)(struct pcmcia_device *, struct uart_port *);
77 void (*wakeup)(struct pcmcia_device *);
78 int (*post)(struct pcmcia_device *);
79 };
80
81 struct serial_info {
82 struct pcmcia_device *p_dev;
83 int ndev;
84 int multi;
85 int slave;
86 int manfid;
87 int prodid;
88 int c950ctrl;
89 int line[4];
90 const struct serial_quirk *quirk;
91 };
92
93 struct serial_cfg_mem {
94 tuple_t tuple;
95 cisparse_t parse;
96 u_char buf[256];
97 };
98
99 /*
100 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
101 * manfid 0x0160, 0x0104
102 * This card appears to have a 14.7456MHz clock.
103 */
104 /* Generic Modem: MD55x (GPRS/EDGE) have
105 * Elan VPU16551 UART with 14.7456MHz oscillator
106 * manfid 0x015D, 0x4C45
107 */
108 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
109 {
110 port->uartclk = 14745600;
111 }
112
113 static int quirk_post_ibm(struct pcmcia_device *link)
114 {
115 u8 val;
116 int ret;
117
118 ret = pcmcia_read_config_byte(link, 0x800, &val);
119 if (ret)
120 goto failed;
121
122 ret = pcmcia_write_config_byte(link, 0x800, val | 1);
123 if (ret)
124 goto failed;
125 return 0;
126
127 failed:
128 return -ENODEV;
129 }
130
131 /*
132 * Nokia cards are not really multiport cards. Shouldn't this
133 * be handled by setting the quirk entry .multi = 0 | 1 ?
134 */
135 static void quirk_config_nokia(struct pcmcia_device *link)
136 {
137 struct serial_info *info = link->priv;
138
139 if (info->multi > 1)
140 info->multi = 1;
141 }
142
143 static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
144 {
145 struct serial_info *info = link->priv;
146
147 if (info->c950ctrl)
148 outb(12, info->c950ctrl + 1);
149 }
150
151 /* request_region? oxsemi branch does no request_region too... */
152 /*
153 * This sequence is needed to properly initialize MC45 attached to OXCF950.
154 * I tried decreasing these msleep()s, but it worked properly (survived
155 * 1000 stop/start operations) with these timeouts (or bigger).
156 */
157 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
158 {
159 struct serial_info *info = link->priv;
160 unsigned int ctrl = info->c950ctrl;
161
162 outb(0xA, ctrl + 1);
163 msleep(100);
164 outb(0xE, ctrl + 1);
165 msleep(300);
166 outb(0xC, ctrl + 1);
167 msleep(100);
168 outb(0xE, ctrl + 1);
169 msleep(200);
170 outb(0xF, ctrl + 1);
171 msleep(100);
172 outb(0xE, ctrl + 1);
173 msleep(100);
174 outb(0xC, ctrl + 1);
175 }
176
177 /*
178 * Socket Dual IO: this enables irq's for second port
179 */
180 static void quirk_config_socket(struct pcmcia_device *link)
181 {
182 struct serial_info *info = link->priv;
183
184 if (info->multi)
185 link->config_flags |= CONF_ENABLE_ESR;
186 }
187
188 static const struct serial_quirk quirks[] = {
189 {
190 .manfid = 0x0160,
191 .prodid = 0x0104,
192 .multi = -1,
193 .setup = quirk_setup_brainboxes_0104,
194 }, {
195 .manfid = 0x015D,
196 .prodid = 0x4C45,
197 .multi = -1,
198 .setup = quirk_setup_brainboxes_0104,
199 }, {
200 .manfid = MANFID_IBM,
201 .prodid = ~0,
202 .multi = -1,
203 .post = quirk_post_ibm,
204 }, {
205 .manfid = MANFID_INTEL,
206 .prodid = PRODID_INTEL_DUAL_RS232,
207 .multi = 2,
208 }, {
209 .manfid = MANFID_NATINST,
210 .prodid = PRODID_NATINST_QUAD_RS232,
211 .multi = 4,
212 }, {
213 .manfid = MANFID_NOKIA,
214 .prodid = ~0,
215 .multi = -1,
216 .config = quirk_config_nokia,
217 }, {
218 .manfid = MANFID_OMEGA,
219 .prodid = PRODID_OMEGA_QSP_100,
220 .multi = 4,
221 }, {
222 .manfid = MANFID_OXSEMI,
223 .prodid = ~0,
224 .multi = -1,
225 .wakeup = quirk_wakeup_oxsemi,
226 }, {
227 .manfid = MANFID_POSSIO,
228 .prodid = PRODID_POSSIO_GCC,
229 .multi = -1,
230 .wakeup = quirk_wakeup_possio_gcc,
231 }, {
232 .manfid = MANFID_QUATECH,
233 .prodid = PRODID_QUATECH_DUAL_RS232,
234 .multi = 2,
235 }, {
236 .manfid = MANFID_QUATECH,
237 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
238 .multi = 2,
239 }, {
240 .manfid = MANFID_QUATECH,
241 .prodid = PRODID_QUATECH_DUAL_RS232_G,
242 .multi = 2,
243 }, {
244 .manfid = MANFID_QUATECH,
245 .prodid = PRODID_QUATECH_QUAD_RS232,
246 .multi = 4,
247 }, {
248 .manfid = MANFID_SOCKET,
249 .prodid = PRODID_SOCKET_DUAL_RS232,
250 .multi = 2,
251 .config = quirk_config_socket,
252 }, {
253 .manfid = MANFID_SOCKET,
254 .prodid = ~0,
255 .multi = -1,
256 .config = quirk_config_socket,
257 }
258 };
259
260
261 static int serial_config(struct pcmcia_device * link);
262
263
264 static void serial_remove(struct pcmcia_device *link)
265 {
266 struct serial_info *info = link->priv;
267 int i;
268
269 dev_dbg(&link->dev, "serial_release\n");
270
271 /*
272 * Recheck to see if the device is still configured.
273 */
274 for (i = 0; i < info->ndev; i++)
275 serial8250_unregister_port(info->line[i]);
276
277 if (!info->slave)
278 pcmcia_disable_device(link);
279 }
280
281 static int serial_suspend(struct pcmcia_device *link)
282 {
283 struct serial_info *info = link->priv;
284 int i;
285
286 for (i = 0; i < info->ndev; i++)
287 serial8250_suspend_port(info->line[i]);
288
289 return 0;
290 }
291
292 static int serial_resume(struct pcmcia_device *link)
293 {
294 struct serial_info *info = link->priv;
295 int i;
296
297 for (i = 0; i < info->ndev; i++)
298 serial8250_resume_port(info->line[i]);
299
300 if (info->quirk && info->quirk->wakeup)
301 info->quirk->wakeup(link);
302
303 return 0;
304 }
305
306 static int serial_probe(struct pcmcia_device *link)
307 {
308 struct serial_info *info;
309
310 dev_dbg(&link->dev, "serial_attach()\n");
311
312 /* Create new serial device */
313 info = kzalloc(sizeof (*info), GFP_KERNEL);
314 if (!info)
315 return -ENOMEM;
316 info->p_dev = link;
317 link->priv = info;
318
319 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
320 if (do_sound)
321 link->config_flags |= CONF_ENABLE_SPKR;
322
323 return serial_config(link);
324 }
325
326 static void serial_detach(struct pcmcia_device *link)
327 {
328 struct serial_info *info = link->priv;
329
330 dev_dbg(&link->dev, "serial_detach\n");
331
332 /*
333 * Ensure that the ports have been released.
334 */
335 serial_remove(link);
336
337 /* free bits */
338 kfree(info);
339 }
340
341 /*====================================================================*/
342
343 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
344 unsigned int iobase, int irq)
345 {
346 struct uart_port port;
347 int line;
348
349 memset(&port, 0, sizeof (struct uart_port));
350 port.iobase = iobase;
351 port.irq = irq;
352 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
353 port.uartclk = 1843200;
354 port.dev = &handle->dev;
355 if (buggy_uart)
356 port.flags |= UPF_BUGGY_UART;
357
358 if (info->quirk && info->quirk->setup)
359 info->quirk->setup(handle, &port);
360
361 line = serial8250_register_port(&port);
362 if (line < 0) {
363 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
364 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
365 return -EINVAL;
366 }
367
368 info->line[info->ndev] = line;
369 info->ndev++;
370
371 return 0;
372 }
373
374 /*====================================================================*/
375
376 static int pfc_config(struct pcmcia_device *p_dev)
377 {
378 unsigned int port = 0;
379 struct serial_info *info = p_dev->priv;
380
381 if ((p_dev->resource[1]->end != 0) &&
382 (resource_size(p_dev->resource[1]) == 8)) {
383 port = p_dev->resource[1]->start;
384 info->slave = 1;
385 } else if ((info->manfid == MANFID_OSITECH) &&
386 (resource_size(p_dev->resource[0]) == 0x40)) {
387 port = p_dev->resource[0]->start + 0x28;
388 info->slave = 1;
389 }
390 if (info->slave)
391 return setup_serial(p_dev, info, port, p_dev->irq);
392
393 dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
394 return -ENODEV;
395 }
396
397 static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
398 {
399 static const int size_table[2] = { 8, 16 };
400 int *try = priv_data;
401
402 if (p_dev->resource[0]->start == 0)
403 return -ENODEV;
404
405 if ((*try & 0x1) == 0)
406 p_dev->io_lines = 16;
407
408 if (p_dev->resource[0]->end != size_table[(*try >> 1)])
409 return -ENODEV;
410
411 p_dev->resource[0]->end = 8;
412 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
413 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
414
415 return pcmcia_request_io(p_dev);
416 }
417
418 static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
419 void *priv_data)
420 {
421 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
422 int j;
423
424 if (p_dev->io_lines > 3)
425 return -ENODEV;
426
427 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
428 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
429 p_dev->resource[0]->end = 8;
430
431 for (j = 0; j < 5; j++) {
432 p_dev->resource[0]->start = base[j];
433 p_dev->io_lines = base[j] ? 16 : 3;
434 if (!pcmcia_request_io(p_dev))
435 return 0;
436 }
437 return -ENODEV;
438 }
439
440 static int simple_config(struct pcmcia_device *link)
441 {
442 struct serial_info *info = link->priv;
443 int i = -ENODEV, try;
444
445 /* First pass: look for a config entry that looks normal.
446 * Two tries: without IO aliases, then with aliases */
447 link->config_flags |= CONF_AUTO_SET_VPP;
448 for (try = 0; try < 4; try++)
449 if (!pcmcia_loop_config(link, simple_config_check, &try))
450 goto found_port;
451
452 /* Second pass: try to find an entry that isn't picky about
453 its base address, then try to grab any standard serial port
454 address, and finally try to get any free port. */
455 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
456 goto found_port;
457
458 dev_warn(&link->dev, "no usable port range found, giving up\n");
459 return -1;
460
461 found_port:
462 if (info->multi && (info->manfid == MANFID_3COM))
463 link->config_index &= ~(0x08);
464
465 /*
466 * Apply any configuration quirks.
467 */
468 if (info->quirk && info->quirk->config)
469 info->quirk->config(link);
470
471 i = pcmcia_enable_device(link);
472 if (i != 0)
473 return -1;
474 return setup_serial(link, info, link->resource[0]->start, link->irq);
475 }
476
477 static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
478 {
479 int *multi = priv_data;
480
481 if (p_dev->resource[1]->end)
482 return -EINVAL;
483
484 /* The quad port cards have bad CIS's, so just look for a
485 window larger than 8 ports and assume it will be right */
486 if (p_dev->resource[0]->end <= 8)
487 return -EINVAL;
488
489 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
490 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
491 p_dev->resource[0]->end = *multi * 8;
492
493 if (pcmcia_request_io(p_dev))
494 return -ENODEV;
495 return 0;
496 }
497
498 static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
499 void *priv_data)
500 {
501 int *base2 = priv_data;
502
503 if (!p_dev->resource[0]->end || !p_dev->resource[1]->end ||
504 p_dev->resource[0]->start + 8 != p_dev->resource[1]->start)
505 return -ENODEV;
506
507 p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
508 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
509 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
510
511 if (pcmcia_request_io(p_dev))
512 return -ENODEV;
513
514 *base2 = p_dev->resource[0]->start + 8;
515 return 0;
516 }
517
518 static int multi_config(struct pcmcia_device *link)
519 {
520 struct serial_info *info = link->priv;
521 int i, base2 = 0;
522
523 /* First, look for a generic full-sized window */
524 if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
525 base2 = link->resource[0]->start + 8;
526 else {
527 /* If that didn't work, look for two windows */
528 info->multi = 2;
529 if (pcmcia_loop_config(link, multi_config_check_notpicky,
530 &base2)) {
531 dev_warn(&link->dev, "no usable port range "
532 "found, giving up\n");
533 return -ENODEV;
534 }
535 }
536
537 if (!link->irq)
538 dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
539
540 /*
541 * Apply any configuration quirks.
542 */
543 if (info->quirk && info->quirk->config)
544 info->quirk->config(link);
545
546 i = pcmcia_enable_device(link);
547 if (i != 0)
548 return -ENODEV;
549
550 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
551 * 8 registers are for the UART, the others are extra registers.
552 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
553 */
554 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
555 info->prodid == PRODID_POSSIO_GCC)) {
556 int err;
557
558 if (link->config_index == 1 ||
559 link->config_index == 3) {
560 err = setup_serial(link, info, base2,
561 link->irq);
562 base2 = link->resource[0]->start;
563 } else {
564 err = setup_serial(link, info, link->resource[0]->start,
565 link->irq);
566 }
567 info->c950ctrl = base2;
568
569 /*
570 * FIXME: We really should wake up the port prior to
571 * handing it over to the serial layer.
572 */
573 if (info->quirk && info->quirk->wakeup)
574 info->quirk->wakeup(link);
575
576 return 0;
577 }
578
579 setup_serial(link, info, link->resource[0]->start, link->irq);
580 for (i = 0; i < info->multi - 1; i++)
581 setup_serial(link, info, base2 + (8 * i),
582 link->irq);
583 return 0;
584 }
585
586 static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
587 {
588 struct serial_info *info = p_dev->priv;
589
590 if (!p_dev->resource[0]->end)
591 return -EINVAL;
592
593 if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
594 info->multi = p_dev->resource[0]->end >> 3;
595
596 if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
597 && (p_dev->resource[1]->end == 8))
598 info->multi = 2;
599
600 return 0; /* break */
601 }
602
603
604 static int serial_config(struct pcmcia_device * link)
605 {
606 struct serial_info *info = link->priv;
607 int i;
608
609 dev_dbg(&link->dev, "serial_config\n");
610
611 /* Is this a compliant multifunction card? */
612 info->multi = (link->socket->functions > 1);
613
614 /* Is this a multiport card? */
615 info->manfid = link->manf_id;
616 info->prodid = link->card_id;
617
618 for (i = 0; i < ARRAY_SIZE(quirks); i++)
619 if ((quirks[i].manfid == ~0 ||
620 quirks[i].manfid == info->manfid) &&
621 (quirks[i].prodid == ~0 ||
622 quirks[i].prodid == info->prodid)) {
623 info->quirk = &quirks[i];
624 break;
625 }
626
627 /* Another check for dual-serial cards: look for either serial or
628 multifunction cards that ask for appropriate IO port ranges */
629 if ((info->multi == 0) &&
630 (link->has_func_id) &&
631 (link->socket->pcmcia_pfc == 0) &&
632 ((link->func_id == CISTPL_FUNCID_MULTI) ||
633 (link->func_id == CISTPL_FUNCID_SERIAL)))
634 pcmcia_loop_config(link, serial_check_for_multi, info);
635
636 /*
637 * Apply any multi-port quirk.
638 */
639 if (info->quirk && info->quirk->multi != -1)
640 info->multi = info->quirk->multi;
641
642 dev_info(&link->dev,
643 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
644 link->manf_id, link->card_id,
645 link->socket->pcmcia_pfc, info->multi, info->quirk);
646 if (link->socket->pcmcia_pfc)
647 i = pfc_config(link);
648 else if (info->multi > 1)
649 i = multi_config(link);
650 else
651 i = simple_config(link);
652
653 if (i || info->ndev == 0)
654 goto failed;
655
656 /*
657 * Apply any post-init quirk. FIXME: This should really happen
658 * before we register the port, since it might already be in use.
659 */
660 if (info->quirk && info->quirk->post)
661 if (info->quirk->post(link))
662 goto failed;
663
664 return 0;
665
666 failed:
667 dev_warn(&link->dev, "failed to initialize\n");
668 serial_remove(link);
669 return -ENODEV;
670 }
671
672 static const struct pcmcia_device_id serial_ids[] = {
673 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
674 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
675 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
676 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
677 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
678 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
679 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
680 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
681 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
682 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
683 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
684 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
685 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
686 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
687 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
688 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
689 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
690 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
691 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
692 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
693 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
694 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
695 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
696 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
697 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
698 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
699 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
700 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
701 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
702 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
703 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
704 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
705 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
706 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
707 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
708 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
709 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
710 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
711 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
712 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
713 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
714 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
715 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
716 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
717 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
718 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
719 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
720 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
721 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
722 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
723 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
724 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
725 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
726 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
727 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
728 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
729 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
730 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
731 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
732 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
733 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
734 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
735 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
736 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
737 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
738 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
739 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
740 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
741 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
742 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
743 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
744 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
745 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
746 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
747 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
748 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
749 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
750 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
751 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
752 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
753 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
754 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
755 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
756 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
757 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
758 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
759 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
760 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
761 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
762 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
763 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
764 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
765 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
766 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
767 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
768 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
769 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
770 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
771 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
772 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
773 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
774 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
775 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
776 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
777 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
778 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
779 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
780 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
781 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
782 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
783 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
784 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
785 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
786 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
787 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
788 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
789 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
790 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
791 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
792 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
793 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
794 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
795 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
796 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
797 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
798 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
799 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
800 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
801 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
802 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
803 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
804 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
805 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
806 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
807 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
808 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
809 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
810 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
811 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
812 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
813 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
814 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
815 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
816 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
817 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
818 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
819 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
820 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
821 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
822 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
823 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
824 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
825 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
826 /* too generic */
827 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
828 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
829 PCMCIA_DEVICE_FUNC_ID(2),
830 PCMCIA_DEVICE_NULL,
831 };
832 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
833
834 MODULE_FIRMWARE("cis/PCMLM28.cis");
835 MODULE_FIRMWARE("cis/DP83903.cis");
836 MODULE_FIRMWARE("cis/3CCFEM556.cis");
837 MODULE_FIRMWARE("cis/3CXEM556.cis");
838 MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
839 MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
840 MODULE_FIRMWARE("cis/SW_555_SER.cis");
841 MODULE_FIRMWARE("cis/MT5634ZLX.cis");
842 MODULE_FIRMWARE("cis/COMpad2.cis");
843 MODULE_FIRMWARE("cis/COMpad4.cis");
844 MODULE_FIRMWARE("cis/RS-COM-2P.cis");
845
846 static struct pcmcia_driver serial_cs_driver = {
847 .owner = THIS_MODULE,
848 .name = "serial_cs",
849 .probe = serial_probe,
850 .remove = serial_detach,
851 .id_table = serial_ids,
852 .suspend = serial_suspend,
853 .resume = serial_resume,
854 };
855
856 static int __init init_serial_cs(void)
857 {
858 return pcmcia_register_driver(&serial_cs_driver);
859 }
860
861 static void __exit exit_serial_cs(void)
862 {
863 pcmcia_unregister_driver(&serial_cs_driver);
864 }
865
866 module_init(init_serial_cs);
867 module_exit(exit_serial_cs);
868
869 MODULE_LICENSE("GPL");
Linus' kernel tree