x86, bios: Make the x86 early memory reservation a kernel option
[linux-2.6.git] / arch / arm / mach-msm / board-msm7x27.c
blobdb9381b85bf031542e1fca1837d15b68242aa201
1 /*
2 * Copyright (C) 2007 Google, Inc.
3 * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
4 * Author: Brian Swetland <swetland@google.com>
6 * This software is licensed under the terms of the GNU General Public
7 * License version 2, as published by the Free Software Foundation, and
8 * may be copied, distributed, and modified under those terms.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/platform_device.h>
20 #include <linux/input.h>
21 #include <linux/io.h>
22 #include <linux/delay.h>
23 #include <linux/power_supply.h>
25 #include <mach/hardware.h>
26 #include <asm/mach-types.h>
27 #include <asm/mach/arch.h>
28 #include <asm/mach/map.h>
29 #include <asm/mach/flash.h>
30 #include <asm/setup.h>
31 #ifdef CONFIG_CACHE_L2X0
32 #include <asm/hardware/cache-l2x0.h>
33 #endif
35 #include <mach/vreg.h>
36 #include <mach/mpp.h>
37 #include <mach/gpio.h>
38 #include <mach/board.h>
39 #include <mach/msm_iomap.h>
41 #include <linux/mtd/nand.h>
42 #include <linux/mtd/partitions.h>
44 #include "devices.h"
45 #include "socinfo.h"
46 #include "clock.h"
48 static struct resource smc91x_resources[] = {
49 [0] = {
50 .start = 0x9C004300,
51 .end = 0x9C0043ff,
52 .flags = IORESOURCE_MEM,
54 [1] = {
55 .start = MSM_GPIO_TO_INT(132),
56 .end = MSM_GPIO_TO_INT(132),
57 .flags = IORESOURCE_IRQ,
61 static struct platform_device smc91x_device = {
62 .name = "smc91x",
63 .id = 0,
64 .num_resources = ARRAY_SIZE(smc91x_resources),
65 .resource = smc91x_resources,
68 static struct platform_device *devices[] __initdata = {
69 &msm_device_uart3,
70 &msm_device_smd,
71 &msm_device_dmov,
72 &msm_device_nand,
73 &smc91x_device,
76 extern struct sys_timer msm_timer;
78 static void __init msm7x2x_init_irq(void)
80 msm_init_irq();
83 static void __init msm7x2x_init(void)
85 if (socinfo_init() < 0)
86 BUG();
88 if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
89 smc91x_resources[0].start = 0x98000300;
90 smc91x_resources[0].end = 0x980003ff;
91 smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
92 smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
93 if (gpio_tlmm_config(GPIO_CFG(85, 0,
94 GPIO_INPUT,
95 GPIO_PULL_DOWN,
96 GPIO_2MA),
97 GPIO_ENABLE)) {
98 printk(KERN_ERR
99 "%s: Err: Config GPIO-85 INT\n",
100 __func__);
104 platform_add_devices(devices, ARRAY_SIZE(devices));
107 static void __init msm7x2x_map_io(void)
109 msm_map_common_io();
110 /* Technically dependent on the SoC but using machine_is
111 * macros since socinfo is not available this early and there
112 * are plans to restructure the code which will eliminate the
113 * need for socinfo.
115 if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
116 msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
118 if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
119 msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
121 #ifdef CONFIG_CACHE_L2X0
122 if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
123 /* 7x27 has 256KB L2 cache:
124 64Kb/Way and 4-Way Associativity;
125 R/W latency: 3 cycles;
126 evmon/parity/share disabled. */
127 l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
129 #endif
132 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
133 #ifdef CONFIG_MSM_DEBUG_UART
134 .phys_io = MSM_DEBUG_UART_PHYS,
135 .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
136 #endif
137 .boot_params = PHYS_OFFSET + 0x100,
138 .map_io = msm7x2x_map_io,
139 .init_irq = msm7x2x_init_irq,
140 .init_machine = msm7x2x_init,
141 .timer = &msm_timer,
142 MACHINE_END
144 MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
145 #ifdef CONFIG_MSM_DEBUG_UART
146 .phys_io = MSM_DEBUG_UART_PHYS,
147 .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
148 #endif
149 .boot_params = PHYS_OFFSET + 0x100,
150 .map_io = msm7x2x_map_io,
151 .init_irq = msm7x2x_init_irq,
152 .init_machine = msm7x2x_init,
153 .timer = &msm_timer,
154 MACHINE_END
156 MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
157 #ifdef CONFIG_MSM_DEBUG_UART
158 .phys_io = MSM_DEBUG_UART_PHYS,
159 .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
160 #endif
161 .boot_params = PHYS_OFFSET + 0x100,
162 .map_io = msm7x2x_map_io,
163 .init_irq = msm7x2x_init_irq,
164 .init_machine = msm7x2x_init,
165 .timer = &msm_timer,
166 MACHINE_END
168 MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
169 #ifdef CONFIG_MSM_DEBUG_UART
170 .phys_io = MSM_DEBUG_UART_PHYS,
171 .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
172 #endif
173 .boot_params = PHYS_OFFSET + 0x100,
174 .map_io = msm7x2x_map_io,
175 .init_irq = msm7x2x_init_irq,
176 .init_machine = msm7x2x_init,
177 .timer = &msm_timer,
178 MACHINE_END