net: at91_ether: add dt support
[linux-2.6.git] / drivers / staging / cxt1e1 / musycc.h
blobcf6b54e15689ca8e97c2a4ccd06ffef4b634fa9f
1 #ifndef _INC_MUSYCC_H_
2 #define _INC_MUSYCC_H_
4 /*-----------------------------------------------------------------------------
5 * musycc.h - Multichannel Synchronous Communications Controller
6 * CN8778/8474A/8472A/8471A
8 * Copyright (C) 2002-2005 SBE, Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * For further information, contact via email: support@sbei.com
21 * SBE, Inc. San Ramon, California U.S.A.
22 *-----------------------------------------------------------------------------
25 #include <linux/types.h>
27 #define VINT8 volatile u_int8_t
28 #define VINT32 volatile u_int32_t
30 #include "pmcc4_defs.h"
33 /*------------------------------------------------------------------------
34 // Vendor, Board Identification definitions
35 //------------------------------------------------------------------------
38 #define PCI_VENDOR_ID_CONEXANT 0x14f1
39 #define PCI_DEVICE_ID_CN8471 0x8471
40 #define PCI_DEVICE_ID_CN8472 0x8472
41 #define PCI_DEVICE_ID_CN8474 0x8474
42 #define PCI_DEVICE_ID_CN8478 0x8478
43 #define PCI_DEVICE_ID_CN8500 0x8500
44 #define PCI_DEVICE_ID_CN8501 0x8501
45 #define PCI_DEVICE_ID_CN8502 0x8502
46 #define PCI_DEVICE_ID_CN8503 0x8503
48 #define INT_QUEUE_SIZE MUSYCC_NIQD
50 /* RAM image of MUSYCC registers laid out as a C structure */
51 struct musycc_groupr
53 VINT32 thp[32]; /* Transmit Head Pointer [5-29] */
54 VINT32 tmp[32]; /* Transmit Message Pointer [5-30] */
55 VINT32 rhp[32]; /* Receive Head Pointer [5-29] */
56 VINT32 rmp[32]; /* Receive Message Pointer [5-30] */
57 VINT8 ttsm[128]; /* Time Slot Map [5-22] */
58 VINT8 tscm[256]; /* Subchannel Map [5-24] */
59 VINT32 tcct[32]; /* Channel Configuration [5-26] */
60 VINT8 rtsm[128]; /* Time Slot Map [5-22] */
61 VINT8 rscm[256]; /* Subchannel Map [5-24] */
62 VINT32 rcct[32]; /* Channel Configuration [5-26] */
63 VINT32 __glcd; /* Global Configuration Descriptor [5-10] */
64 VINT32 __iqp; /* Interrupt Queue Pointer [5-36] */
65 VINT32 __iql; /* Interrupt Queue Length [5-36] */
66 VINT32 grcd; /* Group Configuration Descriptor [5-16] */
67 VINT32 mpd; /* Memory Protection Descriptor [5-18] */
68 VINT32 mld; /* Message Length Descriptor [5-20] */
69 VINT32 pcd; /* Port Configuration Descriptor [5-19] */
72 /* hardware MUSYCC registers laid out as a C structure */
73 struct musycc_globalr
75 VINT32 gbp; /* Group Base Pointer */
76 VINT32 dacbp; /* Dual Address Cycle Base Pointer */
77 VINT32 srd; /* Service Request Descriptor */
78 VINT32 isd; /* Interrupt Service Descriptor */
80 * adjust __thp due to above 4 registers, which are not contained
81 * within musycc_groupr[]. All __XXX[] are just place holders,
82 * anyhow.
84 VINT32 __thp[32 - 4]; /* Transmit Head Pointer [5-29] */
85 VINT32 __tmp[32]; /* Transmit Message Pointer [5-30] */
86 VINT32 __rhp[32]; /* Receive Head Pointer [5-29] */
87 VINT32 __rmp[32]; /* Receive Message Pointer [5-30] */
88 VINT8 ttsm[128]; /* Time Slot Map [5-22] */
89 VINT8 tscm[256]; /* Subchannel Map [5-24] */
90 VINT32 tcct[32]; /* Channel Configuration [5-26] */
91 VINT8 rtsm[128]; /* Time Slot Map [5-22] */
92 VINT8 rscm[256]; /* Subchannel Map [5-24] */
93 VINT32 rcct[32]; /* Channel Configuration [5-26] */
94 VINT32 glcd; /* Global Configuration Descriptor [5-10] */
95 VINT32 iqp; /* Interrupt Queue Pointer [5-36] */
96 VINT32 iql; /* Interrupt Queue Length [5-36] */
97 VINT32 grcd; /* Group Configuration Descriptor [5-16] */
98 VINT32 mpd; /* Memory Protection Descriptor [5-18] */
99 VINT32 mld; /* Message Length Descriptor [5-20] */
100 VINT32 pcd; /* Port Configuration Descriptor [5-19] */
101 VINT32 rbist; /* Receive BIST status [5-4] */
102 VINT32 tbist; /* Receive BIST status [5-4] */
105 /* Global Config Descriptor bit macros */
106 #define MUSYCC_GCD_ECLK_ENABLE 0x00000800 /* EBUS clock enable */
107 #define MUSYCC_GCD_INTEL_SELECT 0x00000400 /* MPU type select */
108 #define MUSYCC_GCD_INTA_DISABLE 0x00000008 /* PCI INTA disable */
109 #define MUSYCC_GCD_INTB_DISABLE 0x00000004 /* PCI INTB disable */
110 #define MUSYCC_GCD_BLAPSE 12 /* Position index for BLAPSE bit
111 * field */
112 #define MUSYCC_GCD_ALAPSE 8 /* Position index for ALAPSE bit
113 * field */
114 #define MUSYCC_GCD_ELAPSE 4 /* Position index for ELAPSE bit
115 * field */
116 #define MUSYCC_GCD_PORTMAP_3 3 /* Reserved */
117 #define MUSYCC_GCD_PORTMAP_2 2 /* Port 0=>Grp 0,1,2,3; Port 1=>Grp
118 * 4,5,6,7 */
119 #define MUSYCC_GCD_PORTMAP_1 1 /* Port 0=>Grp 0,1; Port 1=>Grp 2,3,
120 * etc... */
121 #define MUSYCC_GCD_PORTMAP_0 0 /* Port 0=>Grp 0; Port 1=>Grp 2,
122 * etc... */
124 /* and board specific assignments... */
125 #ifdef SBE_WAN256T3_ENABLE
126 #define BLAPSE_VAL 0
127 #define ALAPSE_VAL 0
128 #define ELAPSE_VAL 7
129 #define PORTMAP_VAL MUSYCC_GCD_PORTMAP_2
130 #endif
132 #ifdef SBE_PMCC4_ENABLE
133 #define BLAPSE_VAL 7
134 #define ALAPSE_VAL 3
135 #define ELAPSE_VAL 7
136 #define PORTMAP_VAL MUSYCC_GCD_PORTMAP_0
137 #endif
139 #define GCD_MAGIC (((BLAPSE_VAL)<<(MUSYCC_GCD_BLAPSE)) | \
140 ((ALAPSE_VAL)<<(MUSYCC_GCD_ALAPSE)) | \
141 ((ELAPSE_VAL)<<(MUSYCC_GCD_ELAPSE)) | \
142 (MUSYCC_GCD_ECLK_ENABLE) | PORTMAP_VAL)
144 /* Group Config Descriptor bit macros */
145 #define MUSYCC_GRCD_RX_ENABLE 0x00000001 /* Enable receive processing */
146 #define MUSYCC_GRCD_TX_ENABLE 0x00000002 /* Enable transmit processing */
147 #define MUSYCC_GRCD_SUBCHAN_DISABLE 0x00000004 /* Master disable for
148 * subchanneling */
149 #define MUSYCC_GRCD_OOFMP_DISABLE 0x00000008 /* Out of Frame message
150 * processing disabled all
151 * channels */
152 #define MUSYCC_GRCD_OOFIRQ_DISABLE 0x00000010 /* Out of Frame/In Frame irqs
153 * disabled */
154 #define MUSYCC_GRCD_COFAIRQ_DISABLE 0x00000020 /* Change of Frame Alignment
155 * irq disabled */
156 #define MUSYCC_GRCD_INHRBSD 0x00000100 /* Receive Buffer Status
157 * overwrite disabled */
158 #define MUSYCC_GRCD_INHTBSD 0x00000200 /* Transmit Buffer Status
159 * overwrite disabled */
160 #define MUSYCC_GRCD_SF_ALIGN 0x00008000 /* External frame sync */
161 #define MUSYCC_GRCD_MC_ENABLE 0x00000040 /* Message configuration bits
162 * copy enable. Conexant sez
163 * turn this on */
164 #define MUSYCC_GRCD_POLLTH_16 0x00000001 /* Poll every 16th frame */
165 #define MUSYCC_GRCD_POLLTH_32 0x00000002 /* Poll every 32nd frame */
166 #define MUSYCC_GRCD_POLLTH_64 0x00000003 /* Poll every 64th frame */
167 #define MUSYCC_GRCD_POLLTH_SHIFT 10 /* Position index for poll throttle
168 * bit field */
169 #define MUSYCC_GRCD_SUERM_THRESH_SHIFT 16 /* Position index for SUERM
170 * count threshold */
172 /* Port Config Descriptor bit macros */
173 #define MUSYCC_PCD_E1X2_MODE 2 /* Port mode in bits 0-2. T1 and E1 */
174 #define MUSYCC_PCD_E1X4_MODE 3 /* are defined in cn847x.h */
175 #define MUSYCC_PCD_NX64_MODE 4
176 #define MUSYCC_PCD_TXDATA_RISING 0x00000010 /* Sample Tx data on TCLK
177 * rising edge */
178 #define MUSYCC_PCD_TXSYNC_RISING 0x00000020 /* Sample Tx frame sync on
179 * TCLK rising edge */
180 #define MUSYCC_PCD_RXDATA_RISING 0x00000040 /* Sample Rx data on RCLK
181 * rising edge */
182 #define MUSYCC_PCD_RXSYNC_RISING 0x00000080 /* Sample Rx frame sync on
183 * RCLK rising edge */
184 #define MUSYCC_PCD_ROOF_RISING 0x00000100 /* Sample Rx Out Of Frame
185 * signal on RCLK rising edge */
186 #define MUSYCC_PCD_TX_DRIVEN 0x00000200 /* No mapped timeslots causes
187 * logic 1 on output, else
188 * tristate */
189 #define MUSYCC_PCD_PORTMODE_MASK 0xfffffff8 /* For changing the port mode
190 * between E1 and T1 */
192 /* Time Slot Descriptor bit macros */
193 #define MUSYCC_TSD_MODE_64KBPS 4
194 #define MUSYCC_TSD_MODE_56KBPS 5
195 #define MUSYCC_TSD_SUBCHANNEL_WO_FIRST 6
196 #define MUSYCC_TSD_SUBCHANNEL_WITH_FIRST 7
198 /* Message Descriptor bit macros */
199 #define MUSYCC_MDT_BASE03_ADDR 0x00006000
201 /* Channel Config Descriptor bit macros */
202 #define MUSYCC_CCD_BUFIRQ_DISABLE 0x00000002 /* BUFF and ONR irqs disabled */
203 #define MUSYCC_CCD_EOMIRQ_DISABLE 0x00000004 /* EOM irq disabled */
204 #define MUSYCC_CCD_MSGIRQ_DISABLE 0x00000008 /* LNG, FCS, ALIGN, and ABT
205 * irqs disabled */
206 #define MUSYCC_CCD_IDLEIRQ_DISABLE 0x00000010 /* CHABT, CHIC, and SHT irqs
207 * disabled */
208 #define MUSYCC_CCD_FILTIRQ_DISABLE 0x00000020 /* SFILT irq disabled */
209 #define MUSYCC_CCD_SDECIRQ_DISABLE 0x00000040 /* SDEC irq disabled */
210 #define MUSYCC_CCD_SINCIRQ_DISABLE 0x00000080 /* SINC irq disabled */
211 #define MUSYCC_CCD_SUERIRQ_DISABLE 0x00000100 /* SUERR irq disabled */
212 #define MUSYCC_CCD_FCS_XFER 0x00000200 /* Propagate FCS along with
213 * received data */
214 #define MUSYCC_CCD_PROTO_SHIFT 12 /* Position index for protocol bit
215 * field */
216 #define MUSYCC_CCD_TRANS 0 /* Protocol mode in bits 12-14 */
217 #define MUSYCC_CCD_SS7 1
218 #define MUSYCC_CCD_HDLC_FCS16 2
219 #define MUSYCC_CCD_HDLC_FCS32 3
220 #define MUSYCC_CCD_EOPIRQ_DISABLE 0x00008000 /* EOP irq disabled */
221 #define MUSYCC_CCD_INVERT_DATA 0x00800000 /* Invert data */
222 #define MUSYCC_CCD_MAX_LENGTH 10 /* Position index for max length bit
223 * field */
224 #define MUSYCC_CCD_BUFFER_LENGTH 16 /* Position index for internal data
225 * buffer length */
226 #define MUSYCC_CCD_BUFFER_LOC 24 /* Position index for internal data
227 * buffer starting location */
229 /****************************************************************************
230 * Interrupt Descriptor Information */
232 #define INT_EMPTY_ENTRY 0xfeedface
233 #define INT_EMPTY_ENTRY2 0xdeadface
235 /****************************************************************************
236 * Interrupt Status Descriptor
238 * NOTE: One must first fetch the value of the interrupt status descriptor
239 * into a local variable, then pass that value into the read macros. This
240 * is required to avoid race conditions.
241 ***/
243 #define INTRPTS_NEXTINT_M 0x7FFF0000
244 #define INTRPTS_NEXTINT_S 16
245 #define INTRPTS_NEXTINT(x) ((x & INTRPTS_NEXTINT_M) >> INTRPTS_NEXTINT_S)
247 #define INTRPTS_INTFULL_M 0x00008000
248 #define INTRPTS_INTFULL_S 15
249 #define INTRPTS_INTFULL(x) ((x & INTRPTS_INTFULL_M) >> INTRPTS_INTFULL_S)
251 #define INTRPTS_INTCNT_M 0x00007FFF
252 #define INTRPTS_INTCNT_S 0
253 #define INTRPTS_INTCNT(x) ((x & INTRPTS_INTCNT_M) >> INTRPTS_INTCNT_S)
256 /****************************************************************************
257 * Interrupt Descriptor
258 ***/
260 #define INTRPT_DIR_M 0x80000000
261 #define INTRPT_DIR_S 31
262 #define INTRPT_DIR(x) ((x & INTRPT_DIR_M) >> INTRPT_DIR_S)
264 #define INTRPT_GRP_M 0x60000000
265 #define INTRPT_GRP_MSB_M 0x00004000
266 #define INTRPT_GRP_S 29
267 #define INTRPT_GRP_MSB_S 12
268 #define INTRPT_GRP(x) (((x & INTRPT_GRP_M) >> INTRPT_GRP_S) | \
269 ((x & INTRPT_GRP_MSB_M) >> INTRPT_GRP_MSB_S))
271 #define INTRPT_CH_M 0x1F000000
272 #define INTRPT_CH_S 24
273 #define INTRPT_CH(x) ((x & INTRPT_CH_M) >> INTRPT_CH_S)
275 #define INTRPT_EVENT_M 0x00F00000
276 #define INTRPT_EVENT_S 20
277 #define INTRPT_EVENT(x) ((x & INTRPT_EVENT_M) >> INTRPT_EVENT_S)
279 #define INTRPT_ERROR_M 0x000F0000
280 #define INTRPT_ERROR_S 16
281 #define INTRPT_ERROR(x) ((x & INTRPT_ERROR_M) >> INTRPT_ERROR_S)
283 #define INTRPT_ILOST_M 0x00008000
284 #define INTRPT_ILOST_S 15
285 #define INTRPT_ILOST(x) ((x & INTRPT_ILOST_M) >> INTRPT_ILOST_S)
287 #define INTRPT_PERR_M 0x00004000
288 #define INTRPT_PERR_S 14
289 #define INTRPT_PERR(x) ((x & INTRPT_PERR_M) >> INTRPT_PERR_S)
291 #define INTRPT_BLEN_M 0x00003FFF
292 #define INTRPT_BLEN_S 0
293 #define INTRPT_BLEN(x) ((x & INTRPT_BLEN_M) >> INTRPT_BLEN_S)
296 /* Buffer Descriptor bit macros */
297 #define OWNER_BIT 0x80000000 /* Set for MUSYCC owner on xmit, host
298 * owner on receive */
299 #define HOST_TX_OWNED 0x00000000 /* Host owns descriptor */
300 #define MUSYCC_TX_OWNED 0x80000000 /* MUSYCC owns descriptor */
301 #define HOST_RX_OWNED 0x80000000 /* Host owns descriptor */
302 #define MUSYCC_RX_OWNED 0x00000000 /* MUSYCC owns descriptor */
304 #define POLL_DISABLED 0x40000000 /* MUSYCC not allowed to poll buffer
305 * for ownership */
306 #define EOMIRQ_ENABLE 0x20000000 /* This buffer contains the end of
307 * the message */
308 #define EOBIRQ_ENABLE 0x10000000 /* EOB irq enabled */
309 #define PADFILL_ENABLE 0x01000000 /* Enable padfill */
310 #define REPEAT_BIT 0x00008000 /* Bit on for FISU descriptor */
311 #define LENGTH_MASK 0X3fff /* This part of status descriptor is
312 * length */
313 #define IDLE_CODE 25 /* Position index for idle code (2
314 * bits) */
315 #define EXTRA_FLAGS 16 /* Position index for minimum flags
316 * between messages (8 bits) */
317 #define IDLE_CODE_MASK 0x03 /* Gets rid of garbage before the
318 * pattern is OR'd in */
319 #define EXTRA_FLAGS_MASK 0xff /* Gets rid of garbage before the
320 * pattern is OR'd in */
321 #define PCI_PERMUTED_OWNER_BIT 0x00000080 /* For flipping the bit on
322 * the polled mode descriptor */
324 /* Service Request Descriptor bit macros */
325 #define SREQ 8 /* Position index for service request bit
326 * field */
327 #define SR_NOOP (0<<(SREQ)) /* No Operation. Generates SACK */
328 #define SR_CHIP_RESET (1<<(SREQ)) /* Soft chip reset */
329 #define SR_GROUP_RESET (2<<(SREQ)) /* Group reset */
330 #define SR_GLOBAL_INIT (4<<(SREQ)) /* Global init: read global
331 * config deswc and interrupt
332 * queue desc */
333 #define SR_GROUP_INIT (5<<(SREQ)) /* Group init: read Timeslot
334 * and Subchannel maps,
335 * Channel Config, */
337 * Group Config, Memory Protect, Message Length, and Port Config
338 * Descriptors
340 #define SR_CHANNEL_ACTIVATE (8<<(SREQ)) /* Init channel, read Head
341 * Pointer, process first
342 * Message Descriptor */
343 #define SR_GCHANNEL_MASK 0x001F /* channel portion (gchan) */
344 #define SR_CHANNEL_DEACTIVATE (9<<(SREQ)) /* Stop channel processing */
345 #define SR_JUMP (10<<(SREQ)) /* a: Process new Message
346 * List */
347 #define SR_CHANNEL_CONFIG (11<<(SREQ)) /* b: Read channel
348 * Configuration Descriptor */
349 #define SR_GLOBAL_CONFIG (16<<(SREQ)) /* 10: Read Global
350 * Configuration Descriptor */
351 #define SR_INTERRUPT_Q (17<<(SREQ)) /* 11: Read Interrupt Queue
352 * Descriptor */
353 #define SR_GROUP_CONFIG (18<<(SREQ)) /* 12: Read Group
354 * Configuration Descriptor */
355 #define SR_MEMORY_PROTECT (19<<(SREQ)) /* 13: Read Memory Protection
356 * Descriptor */
357 #define SR_MESSAGE_LENGTH (20<<(SREQ)) /* 14: Read Message Length
358 * Descriptor */
359 #define SR_PORT_CONFIG (21<<(SREQ)) /* 15: Read Port
360 * Configuration Descriptor */
361 #define SR_TIMESLOT_MAP (24<<(SREQ)) /* 18: Read Timeslot Map */
362 #define SR_SUBCHANNEL_MAP (25<<(SREQ)) /* 19: Read Subchannel Map */
363 #define SR_CHAN_CONFIG_TABLE (26<<(SREQ)) /* 20: Read Channel
364 * Configuration Table for
365 * the group */
366 #define SR_TX_DIRECTION 0x00000020 /* Transmit direction bit.
367 * Bit off indicates receive
368 * direction */
369 #define SR_RX_DIRECTION 0x00000000
371 /* Interrupt Descriptor bit macros */
372 #define GROUP10 29 /* Position index for the 2 LS group
373 * bits */
374 #define CHANNEL 24 /* Position index for channel bits */
375 #define INT_IQD_TX 0x80000000
376 #define INT_IQD_GRP 0x60000000
377 #define INT_IQD_CHAN 0x1f000000
378 #define INT_IQD_EVENT 0x00f00000
379 #define INT_IQD_ERROR 0x000f0000
380 #define INT_IQD_ILOST 0x00008000
381 #define INT_IQD_PERR 0x00004000
382 #define INT_IQD_BLEN 0x00003fff
384 /* Interrupt Descriptor Events */
385 #define EVE_EVENT 20 /* Position index for event bits */
386 #define EVE_NONE 0 /* No event to report in this
387 * interrupt */
388 #define EVE_SACK 1 /* Service Request acknowledge */
389 #define EVE_EOB 2 /* End of Buffer */
390 #define EVE_EOM 3 /* End of Message */
391 #define EVE_EOP 4 /* End of Padfill */
392 #define EVE_CHABT 5 /* Change to Abort Code */
393 #define EVE_CHIC 6 /* Change to Idle Code */
394 #define EVE_FREC 7 /* Frame Recovery */
395 #define EVE_SINC 8 /* MTP2 SUERM Increment */
396 #define EVE_SDEC 9 /* MTP2 SUERM Decrement */
397 #define EVE_SFILT 10 /* MTP2 SUERM Filtered Message */
398 /* Interrupt Descriptor Errors */
399 #define ERR_ERRORS 16 /* Position index for error bits */
400 #define ERR_BUF 1 /* Buffer Error */
401 #define ERR_COFA 2 /* Change of Frame Alignment Error */
402 #define ERR_ONR 3 /* Owner Bit Error */
403 #define ERR_PROT 4 /* Memory Protection Error */
404 #define ERR_OOF 8 /* Out of Frame Error */
405 #define ERR_FCS 9 /* FCS Error */
406 #define ERR_ALIGN 10 /* Octet Alignment Error */
407 #define ERR_ABT 11 /* Abort Termination */
408 #define ERR_LNG 12 /* Long Message Error */
409 #define ERR_SHT 13 /* Short Message Error */
410 #define ERR_SUERR 14 /* SUERM threshold exceeded */
411 #define ERR_PERR 15 /* PCI Parity Error */
412 /* Other Stuff */
413 #define TRANSMIT_DIRECTION 0x80000000 /* Transmit direction bit. Bit off
414 * indicates receive direction */
415 #define ILOST 0x00008000 /* Interrupt Lost */
416 #define GROUPMSB 0x00004000 /* Group number MSB */
417 #define SACK_IMAGE 0x00100000 /* Used in IRQ for semaphore test */
418 #define INITIAL_STATUS 0x10000 /* IRQ status should be this after
419 * reset */
421 /* This must be defined on an entire channel group (Port) basis */
422 #define SUERM_THRESHOLD 0x1f
424 #undef VINT32
425 #undef VINT8
427 #endif /*** _INC_MUSYCC_H_ ***/
429 /*** End-of-File ***/