include/linux/ipack.h

   1 /*
   2  * Industry-pack bus.
   3  *
   4  * Copyright (C) 2011-2012 CERN (www.cern.ch)
   5  * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms of the GNU General Public License as published by the Free
   9  * Software Foundation; version 2 of the License.
  10  */
  11
  12 #include <linux/mod_devicetable.h>
  13 #include <linux/device.h>
  14 #include <linux/interrupt.h>
  15
  16 #define IPACK_IDPROM_OFFSET_I                   0x01
  17 #define IPACK_IDPROM_OFFSET_P                   0x03
  18 #define IPACK_IDPROM_OFFSET_A                   0x05
  19 #define IPACK_IDPROM_OFFSET_C                   0x07
  20 #define IPACK_IDPROM_OFFSET_MANUFACTURER_ID     0x09
  21 #define IPACK_IDPROM_OFFSET_MODEL               0x0B
  22 #define IPACK_IDPROM_OFFSET_REVISION            0x0D
  23 #define IPACK_IDPROM_OFFSET_RESERVED            0x0F
  24 #define IPACK_IDPROM_OFFSET_DRIVER_ID_L         0x11
  25 #define IPACK_IDPROM_OFFSET_DRIVER_ID_H         0x13
  26 #define IPACK_IDPROM_OFFSET_NUM_BYTES           0x15
  27 #define IPACK_IDPROM_OFFSET_CRC                 0x17
  28
  29 /*
  30  * IndustryPack Fromat, Vendor and Device IDs.
  31  */
  32
  33 /* ID section format versions */
  34 #define IPACK_ID_VERSION_INVALID        0x00
  35 #define IPACK_ID_VERSION_1              0x01
  36 #define IPACK_ID_VERSION_2              0x02
  37
  38 /* Vendors and devices. Sort key: vendor first, device next. */
  39 #define IPACK1_VENDOR_ID_RESERVED1      0x00
  40 #define IPACK1_VENDOR_ID_RESERVED2      0xFF
  41 #define IPACK1_VENDOR_ID_UNREGISTRED01  0x01
  42 #define IPACK1_VENDOR_ID_UNREGISTRED02  0x02
  43 #define IPACK1_VENDOR_ID_UNREGISTRED03  0x03
  44 #define IPACK1_VENDOR_ID_UNREGISTRED04  0x04
  45 #define IPACK1_VENDOR_ID_UNREGISTRED05  0x05
  46 #define IPACK1_VENDOR_ID_UNREGISTRED06  0x06
  47 #define IPACK1_VENDOR_ID_UNREGISTRED07  0x07
  48 #define IPACK1_VENDOR_ID_UNREGISTRED08  0x08
  49 #define IPACK1_VENDOR_ID_UNREGISTRED09  0x09
  50 #define IPACK1_VENDOR_ID_UNREGISTRED10  0x0A
  51 #define IPACK1_VENDOR_ID_UNREGISTRED11  0x0B
  52 #define IPACK1_VENDOR_ID_UNREGISTRED12  0x0C
  53 #define IPACK1_VENDOR_ID_UNREGISTRED13  0x0D
  54 #define IPACK1_VENDOR_ID_UNREGISTRED14  0x0E
  55 #define IPACK1_VENDOR_ID_UNREGISTRED15  0x0F
  56
  57 #define IPACK1_VENDOR_ID_SBS            0xF0
  58 #define IPACK1_DEVICE_ID_SBS_OCTAL_232  0x22
  59 #define IPACK1_DEVICE_ID_SBS_OCTAL_422  0x2A
  60 #define IPACK1_DEVICE_ID_SBS_OCTAL_485  0x48
  61
  62 struct ipack_bus_ops;
  63 struct ipack_driver;
  64
  65 enum ipack_space {
  66         IPACK_IO_SPACE    = 0,
  67         IPACK_ID_SPACE,
  68         IPACK_INT_SPACE,
  69         IPACK_MEM8_SPACE,
  70         IPACK_MEM16_SPACE,
  71         /* Dummy for counting the number of entries.  Must remain the last
  72          * entry */
  73         IPACK_SPACE_COUNT,
  74 };
  75
  76 /**
  77  */
  78 struct ipack_region {
  79         phys_addr_t start;
  80         size_t      size;
  81 };
  82
  83 /**
  84  *      struct ipack_device
  85  *
  86  *      @slot: Slot where the device is plugged in the carrier board
  87  *      @bus: ipack_bus_device where the device is plugged to.
  88  *      @id_space: Virtual address to ID space.
  89  *      @io_space: Virtual address to IO space.
  90  *      @mem_space: Virtual address to MEM space.
  91  *      @dev: device in kernel representation.
  92  *
  93  * Warning: Direct access to mapped memory is possible but the endianness
  94  * is not the same with PCI carrier or VME carrier. The endianness is managed
  95  * by the carrier board throught bus->ops.
  96  */
  97 struct ipack_device {
  98         unsigned int slot;
  99         struct ipack_bus_device *bus;
 100         struct device dev;
 101         void (*release) (struct ipack_device *dev);
 102         struct ipack_region      region[IPACK_SPACE_COUNT];
 103         u8                      *id;
 104         size_t                   id_avail;
 105         u32                      id_vendor;
 106         u32                      id_device;
 107         u8                       id_format;
 108         unsigned int             id_crc_correct:1;
 109         unsigned int             speed_8mhz:1;
 110         unsigned int             speed_32mhz:1;
 111 };
 112
 113 /**
 114  * struct ipack_driver_ops -- Callbacks to IPack device driver
 115  *
 116  * @probe:  Probe function
 117  * @remove: Prepare imminent removal of the device.  Services provided by the
 118  *          device should be revoked.
 119  */
 120
 121 struct ipack_driver_ops {
 122         int (*probe) (struct ipack_device *dev);
 123         void (*remove) (struct ipack_device *dev);
 124 };
 125
 126 /**
 127  * struct ipack_driver -- Specific data to each ipack device driver
 128  *
 129  * @driver: Device driver kernel representation
 130  * @ops:    Callbacks provided by the IPack device driver
 131  */
 132 struct ipack_driver {
 133         struct device_driver driver;
 134         const struct ipack_device_id *id_table;
 135         const struct ipack_driver_ops *ops;
 136 };
 137
 138 /**
 139  *      struct ipack_bus_ops - available operations on a bridge module
 140  *
 141  *      @map_space: map IP address space
 142  *      @unmap_space: unmap IP address space
 143  *      @request_irq: request IRQ
 144  *      @free_irq: free IRQ
 145  *      @get_clockrate: Returns the clockrate the carrier is currently
 146  *              communicating with the device at.
 147  *      @set_clockrate: Sets the clock-rate for carrier / module communication.
 148  *              Should return -EINVAL if the requested speed is not supported.
 149  *      @get_error: Returns the error state for the slot the device is attached
 150  *              to.
 151  *      @get_timeout: Returns 1 if the communication with the device has
 152  *              previously timed out.
 153  *      @reset_timeout: Resets the state returned by get_timeout.
 154  */
 155 struct ipack_bus_ops {
 156         int (*request_irq) (struct ipack_device *dev,
 157                             irqreturn_t (*handler)(void *), void *arg);
 158         int (*free_irq) (struct ipack_device *dev);
 159         int (*get_clockrate) (struct ipack_device *dev);
 160         int (*set_clockrate) (struct ipack_device *dev, int mherz);
 161         int (*get_error) (struct ipack_device *dev);
 162         int (*get_timeout) (struct ipack_device *dev);
 163         int (*reset_timeout) (struct ipack_device *dev);
 164 };
 165
 166 /**
 167  *      struct ipack_bus_device
 168  *
 169  *      @dev: pointer to carrier device
 170  *      @slots: number of slots available
 171  *      @bus_nr: ipack bus number
 172  *      @ops: bus operations for the mezzanine drivers
 173  */
 174 struct ipack_bus_device {
 175         struct device *parent;
 176         int slots;
 177         int bus_nr;
 178         const struct ipack_bus_ops *ops;
 179 };
 180
 181 /**
 182  *      ipack_bus_register -- register a new ipack bus
 183  *
 184  * @parent: pointer to the parent device, if any.
 185  * @slots: number of slots available in the bus device.
 186  * @ops: bus operations for the mezzanine drivers.
 187  *
 188  * The carrier board device should call this function to register itself as
 189  * available bus device in ipack.
 190  */
 191 struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots,
 192                                             const struct ipack_bus_ops *ops);
 193
 194 /**
 195  *      ipack_bus_unregister -- unregister an ipack bus
 196  */
 197 int ipack_bus_unregister(struct ipack_bus_device *bus);
 198
 199 /**
 200  * ipack_driver_register -- Register a new ipack device driver
 201  *
 202  * Called by a ipack driver to register itself as a driver
 203  * that can manage ipack devices.
 204  */
 205 int ipack_driver_register(struct ipack_driver *edrv, struct module *owner,
 206                           const char *name);
 207 void ipack_driver_unregister(struct ipack_driver *edrv);
 208
 209 /**
 210  *      ipack_device_init -- initialize an IPack device
 211  * @dev: the new device to initialize.
 212  *
 213  * Initialize a new IPack device ("module" in IndustryPack jargon). The call
 214  * is done by the carrier driver.  The carrier should populate the fields
 215  * bus and slot as well as the region array of @dev prior to calling this
 216  * function.  The rest of the fields will be allocated and populated
 217  * during initalization.
 218  *
 219  * Return zero on success or error code on failure.
 220  *
 221  * NOTE: _Never_ directly free @dev after calling this function, even
 222  * if it returned an error! Always use ipack_put_device() to give up the
 223  * reference initialized in this function instead.
 224  */
 225 int ipack_device_init(struct ipack_device *dev);
 226
 227 /**
 228  *      ipack_device_add -- Add an IPack device
 229  * @dev: the new device to add.
 230  *
 231  * Add a new IPack device. The call is done by the carrier driver
 232  * after calling ipack_device_init().
 233  *
 234  * Return zero on success or error code on failure.
 235  *
 236  * NOTE: _Never_ directly free @dev after calling this function, even
 237  * if it returned an error! Always use ipack_put_device() to give up the
 238  * reference initialized in this function instead.
 239  */
 240 int ipack_device_add(struct ipack_device *dev);
 241 void ipack_device_del(struct ipack_device *dev);
 242
 243 void ipack_get_device(struct ipack_device *dev);
 244 void ipack_put_device(struct ipack_device *dev);
 245
 246 /**
 247  * DEFINE_IPACK_DEVICE_TABLE - macro used to describe a IndustryPack table
 248  * @_table: device table name
 249  *
 250  * This macro is used to create a struct ipack_device_id array (a device table)
 251  * in a generic manner.
 252  */
 253 #define DEFINE_IPACK_DEVICE_TABLE(_table) \
 254         const struct ipack_device_id _table[]
 255 /**
 256  * IPACK_DEVICE - macro used to describe a specific IndustryPack device
 257  * @_format: the format version (currently either 1 or 2, 8 bit value)
 258  * @vend:    the 8 or 24 bit IndustryPack Vendor ID
 259  * @dev:     the 8 or 16  bit IndustryPack Device ID
 260  *
 261  * This macro is used to create a struct ipack_device_id that matches a specific
 262  * device.
 263  */
 264 #define IPACK_DEVICE(_format, vend, dev) \
 265          .format = (_format), \
 266          .vendor = (vend), \
 267          .device = (dev)