drivers/mtd/chips/cfi_probe.c

   1 /*
   2    Common Flash Interface probe code.
   3    (C) 2000 Red Hat. GPL'd.
   4 */
   5
   6 #include <linux/module.h>
   7 #include <linux/types.h>
   8 #include <linux/kernel.h>
   9 #include <linux/init.h>
  10 #include <asm/io.h>
  11 #include <asm/byteorder.h>
  12 #include <linux/errno.h>
  13 #include <linux/slab.h>
  14 #include <linux/interrupt.h>
  15
  16 #include <linux/mtd/xip.h>
  17 #include <linux/mtd/map.h>
  18 #include <linux/mtd/cfi.h>
  19 #include <linux/mtd/gen_probe.h>
  20
  21 //#define DEBUG_CFI
  22
  23 #ifdef DEBUG_CFI
  24 static void print_cfi_ident(struct cfi_ident *);
  25 #endif
  26
  27 static int cfi_probe_chip(struct map_info *map, __u32 base,
  28                           unsigned long *chip_map, struct cfi_private *cfi);
  29 static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
  30
  31 struct mtd_info *cfi_probe(struct map_info *map);
  32
  33 #ifdef CONFIG_MTD_XIP
  34
  35 /* only needed for short periods, so this is rather simple */
  36 #define xip_disable()   local_irq_disable()
  37
  38 #define xip_allowed(base, map) \
  39 do { \
  40         (void) map_read(map, base); \
  41         xip_iprefetch(); \
  42         local_irq_enable(); \
  43 } while (0)
  44
  45 #define xip_enable(base, map, cfi) \
  46 do { \
  47         cfi_qry_mode_off(base, map, cfi);               \
  48         xip_allowed(base, map); \
  49 } while (0)
  50
  51 #define xip_disable_qry(base, map, cfi) \
  52 do { \
  53         xip_disable(); \
  54         cfi_qry_mode_on(base, map, cfi); \
  55 } while (0)
  56
  57 #else
  58
  59 #define xip_disable()                   do { } while (0)
  60 #define xip_allowed(base, map)          do { } while (0)
  61 #define xip_enable(base, map, cfi)      do { } while (0)
  62 #define xip_disable_qry(base, map, cfi) do { } while (0)
  63
  64 #endif
  65
  66 /* check for QRY.
  67    in: interleave,type,mode
  68    ret: table index, <0 for error
  69  */
  70
  71 static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
  72                                    unsigned long *chip_map, struct cfi_private *cfi)
  73 {
  74         int i;
  75
  76         if ((base + 0) >= map->size) {
  77                 printk(KERN_NOTICE
  78                         "Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n",
  79                         (unsigned long)base, map->size -1);
  80                 return 0;
  81         }
  82         if ((base + 0xff) >= map->size) {
  83                 printk(KERN_NOTICE
  84                         "Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n",
  85                         (unsigned long)base + 0x55, map->size -1);
  86                 return 0;
  87         }
  88
  89         xip_disable();
  90         if (!cfi_qry_mode_on(base, map, cfi)) {
  91                 xip_enable(base, map, cfi);
  92                 return 0;
  93         }
  94
  95         if (!cfi->numchips) {
  96                 /* This is the first time we're called. Set up the CFI
  97                    stuff accordingly and return */
  98                 return cfi_chip_setup(map, cfi);
  99         }
 100
 101         /* Check each previous chip to see if it's an alias */
 102         for (i=0; i < (base >> cfi->chipshift); i++) {
 103                 unsigned long start;
 104                 if(!test_bit(i, chip_map)) {
 105                         /* Skip location; no valid chip at this address */
 106                         continue;
 107                 }
 108                 start = i << cfi->chipshift;
 109                 /* This chip should be in read mode if it's one
 110                    we've already touched. */
 111                 if (cfi_qry_present(map, start, cfi)) {
 112                         /* Eep. This chip also had the QRY marker.
 113                          * Is it an alias for the new one? */
 114                         cfi_qry_mode_off(start, map, cfi);
 115
 116                         /* If the QRY marker goes away, it's an alias */
 117                         if (!cfi_qry_present(map, start, cfi)) {
 118                                 xip_allowed(base, map);
 119                                 printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
 120                                        map->name, base, start);
 121                                 return 0;
 122                         }
 123                         /* Yes, it's actually got QRY for data. Most
 124                          * unfortunate. Stick the new chip in read mode
 125                          * too and if it's the same, assume it's an alias. */
 126                         /* FIXME: Use other modes to do a proper check */
 127                         cfi_qry_mode_off(base, map, cfi);
 128
 129                         if (cfi_qry_present(map, base, cfi)) {
 130                                 xip_allowed(base, map);
 131                                 printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
 132                                        map->name, base, start);
 133                                 return 0;
 134                         }
 135                 }
 136         }
 137
 138         /* OK, if we got to here, then none of the previous chips appear to
 139            be aliases for the current one. */
 140         set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
 141         cfi->numchips++;
 142
 143         /* Put it back into Read Mode */
 144         cfi_qry_mode_off(base, map, cfi);
 145         xip_allowed(base, map);
 146
 147         printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
 148                map->name, cfi->interleave, cfi->device_type*8, base,
 149                map->bankwidth*8);
 150
 151         return 1;
 152 }
 153
 154 static int __xipram cfi_chip_setup(struct map_info *map,
 155                                    struct cfi_private *cfi)
 156 {
 157         int ofs_factor = cfi->interleave*cfi->device_type;
 158         __u32 base = 0;
 159         int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor);
 160         int i;
 161         int addr_unlock1 = 0x555, addr_unlock2 = 0x2AA;
 162
 163         xip_enable(base, map, cfi);
 164 #ifdef DEBUG_CFI
 165         printk("Number of erase regions: %d\n", num_erase_regions);
 166 #endif
 167         if (!num_erase_regions)
 168                 return 0;
 169
 170         cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
 171         if (!cfi->cfiq) {
 172                 printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
 173                 return 0;
 174         }
 175
 176         memset(cfi->cfiq,0,sizeof(struct cfi_ident));
 177
 178         cfi->cfi_mode = CFI_MODE_CFI;
 179
 180         cfi->sector_erase_cmd = CMD(0x30);
 181
 182         /* Read the CFI info structure */
 183         xip_disable_qry(base, map, cfi);
 184         for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
 185                 ((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor);
 186
 187         /* Do any necessary byteswapping */
 188         cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID);
 189
 190         cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR);
 191         cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID);
 192         cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR);
 193         cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc);
 194         cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize);
 195
 196 #ifdef DEBUG_CFI
 197         /* Dump the information therein */
 198         print_cfi_ident(cfi->cfiq);
 199 #endif
 200
 201         for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
 202                 cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]);
 203
 204 #ifdef DEBUG_CFI
 205                 printk("  Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n",
 206                        i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff,
 207                        (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1);
 208 #endif
 209         }
 210
 211         if (cfi->cfiq->P_ID == P_ID_SST_OLD) {
 212                 addr_unlock1 = 0x5555;
 213                 addr_unlock2 = 0x2AAA;
 214         }
 215
 216         /*
 217          * Note we put the device back into Read Mode BEFORE going into Auto
 218          * Select Mode, as some devices support nesting of modes, others
 219          * don't. This way should always work.
 220          * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
 221          * so should be treated as nops or illegal (and so put the device
 222          * back into Read Mode, which is a nop in this case).
 223          */
 224         cfi_send_gen_cmd(0xf0,     0, base, map, cfi, cfi->device_type, NULL);
 225         cfi_send_gen_cmd(0xaa, addr_unlock1, base, map, cfi, cfi->device_type, NULL);
 226         cfi_send_gen_cmd(0x55, addr_unlock2, base, map, cfi, cfi->device_type, NULL);
 227         cfi_send_gen_cmd(0x90, addr_unlock1, base, map, cfi, cfi->device_type, NULL);
 228         cfi->mfr = cfi_read_query16(map, base);
 229         cfi->id = cfi_read_query16(map, base + ofs_factor);
 230
 231         /* Get AMD/Spansion extended JEDEC ID */
 232         if (cfi->mfr == CFI_MFR_AMD && (cfi->id & 0xff) == 0x7e)
 233                 cfi->id = cfi_read_query(map, base + 0xe * ofs_factor) << 8 |
 234                           cfi_read_query(map, base + 0xf * ofs_factor);
 235
 236         /* Put it back into Read Mode */
 237         cfi_qry_mode_off(base, map, cfi);
 238         xip_allowed(base, map);
 239
 240         printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n",
 241                map->name, cfi->interleave, cfi->device_type*8, base,
 242                map->bankwidth*8, cfi->mfr, cfi->id);
 243
 244         return 1;
 245 }
 246
 247 #ifdef DEBUG_CFI
 248 static char *vendorname(__u16 vendor)
 249 {
 250         switch (vendor) {
 251         case P_ID_NONE:
 252                 return "None";
 253
 254         case P_ID_INTEL_EXT:
 255                 return "Intel/Sharp Extended";
 256
 257         case P_ID_AMD_STD:
 258                 return "AMD/Fujitsu Standard";
 259
 260         case P_ID_INTEL_STD:
 261                 return "Intel/Sharp Standard";
 262
 263         case P_ID_AMD_EXT:
 264                 return "AMD/Fujitsu Extended";
 265
 266         case P_ID_WINBOND:
 267                 return "Winbond Standard";
 268
 269         case P_ID_ST_ADV:
 270                 return "ST Advanced";
 271
 272         case P_ID_MITSUBISHI_STD:
 273                 return "Mitsubishi Standard";
 274
 275         case P_ID_MITSUBISHI_EXT:
 276                 return "Mitsubishi Extended";
 277
 278         case P_ID_SST_PAGE:
 279                 return "SST Page Write";
 280
 281         case P_ID_SST_OLD:
 282                 return "SST 39VF160x/39VF320x";
 283
 284         case P_ID_INTEL_PERFORMANCE:
 285                 return "Intel Performance Code";
 286
 287         case P_ID_INTEL_DATA:
 288                 return "Intel Data";
 289
 290         case P_ID_RESERVED:
 291                 return "Not Allowed / Reserved for Future Use";
 292
 293         default:
 294                 return "Unknown";
 295         }
 296 }
 297
 298
 299 static void print_cfi_ident(struct cfi_ident *cfip)
 300 {
 301 #if 0
 302         if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') {
 303                 printk("Invalid CFI ident structure.\n");
 304                 return;
 305         }
 306 #endif
 307         printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));
 308         if (cfip->P_ADR)
 309                 printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);
 310         else
 311                 printk("No Primary Algorithm Table\n");
 312
 313         printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID));
 314         if (cfip->A_ADR)
 315                 printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR);
 316         else
 317                 printk("No Alternate Algorithm Table\n");
 318
 319
 320         printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
 321         printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
 322         if (cfip->VppMin) {
 323                 printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
 324                 printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
 325         }
 326         else
 327                 printk("No Vpp line\n");
 328
 329         printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp);
 330         printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
 331
 332         if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) {
 333                 printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp);
 334                 printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
 335         }
 336         else
 337                 printk("Full buffer write not supported\n");
 338
 339         printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp);
 340         printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp));
 341         if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) {
 342                 printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp);
 343                 printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp));
 344         }
 345         else
 346                 printk("Chip erase not supported\n");
 347
 348         printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20));
 349         printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc);
 350         switch(cfip->InterfaceDesc) {
 351         case CFI_INTERFACE_X8_ASYNC:
 352                 printk("  - x8-only asynchronous interface\n");
 353                 break;
 354
 355         case CFI_INTERFACE_X16_ASYNC:
 356                 printk("  - x16-only asynchronous interface\n");
 357                 break;
 358
 359         case CFI_INTERFACE_X8_BY_X16_ASYNC:
 360                 printk("  - supports x8 and x16 via BYTE# with asynchronous interface\n");
 361                 break;
 362
 363         case CFI_INTERFACE_X32_ASYNC:
 364                 printk("  - x32-only asynchronous interface\n");
 365                 break;
 366
 367         case CFI_INTERFACE_X16_BY_X32_ASYNC:
 368                 printk("  - supports x16 and x32 via Word# with asynchronous interface\n");
 369                 break;
 370
 371         case CFI_INTERFACE_NOT_ALLOWED:
 372                 printk("  - Not Allowed / Reserved\n");
 373                 break;
 374
 375         default:
 376                 printk("  - Unknown\n");
 377                 break;
 378         }
 379
 380         printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize);
 381         printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions);
 382
 383 }
 384 #endif /* DEBUG_CFI */
 385
 386 static struct chip_probe cfi_chip_probe = {
 387         .name           = "CFI",
 388         .probe_chip     = cfi_probe_chip
 389 };
 390
 391 struct mtd_info *cfi_probe(struct map_info *map)
 392 {
 393         /*
 394          * Just use the generic probe stuff to call our CFI-specific
 395          * chip_probe routine in all the possible permutations, etc.
 396          */
 397         return mtd_do_chip_probe(map, &cfi_chip_probe);
 398 }
 399
 400 static struct mtd_chip_driver cfi_chipdrv = {
 401         .probe          = cfi_probe,
 402         .name           = "cfi_probe",
 403         .module         = THIS_MODULE
 404 };
 405
 406 static int __init cfi_probe_init(void)
 407 {
 408         register_mtd_chip_driver(&cfi_chipdrv);
 409         return 0;
 410 }
 411
 412 static void __exit cfi_probe_exit(void)
 413 {
 414         unregister_mtd_chip_driver(&cfi_chipdrv);
 415 }
 416
 417 module_init(cfi_probe_init);
 418 module_exit(cfi_probe_exit);
 419
 420 MODULE_LICENSE("GPL");
 421 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
 422 MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips");