Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
[linux-2.6.git] / drivers / mfd / omap-usb-tll.c
blobe59ac4cbac96136c7cf34607030a408428c6b3a9
1 /**
2 * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
4 * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com
5 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
6 * Author: Roger Quadros <rogerq@ti.com>
8 * This program is free software: you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 of
10 * the License as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program. If not, see <http://www.gnu.org/licenses/>.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/types.h>
23 #include <linux/slab.h>
24 #include <linux/spinlock.h>
25 #include <linux/platform_device.h>
26 #include <linux/clk.h>
27 #include <linux/io.h>
28 #include <linux/err.h>
29 #include <linux/pm_runtime.h>
30 #include <linux/platform_data/usb-omap.h>
31 #include <linux/of.h>
33 #define USBTLL_DRIVER_NAME "usbhs_tll"
35 /* TLL Register Set */
36 #define OMAP_USBTLL_REVISION (0x00)
37 #define OMAP_USBTLL_SYSCONFIG (0x10)
38 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
39 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
40 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
41 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
42 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0)
44 #define OMAP_USBTLL_SYSSTATUS (0x14)
45 #define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0)
47 #define OMAP_USBTLL_IRQSTATUS (0x18)
48 #define OMAP_USBTLL_IRQENABLE (0x1C)
50 #define OMAP_TLL_SHARED_CONF (0x30)
51 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6)
52 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5)
53 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2)
54 #define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1)
55 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0)
57 #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num)
58 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24
59 #define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16)
60 #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15)
61 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11)
62 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10)
63 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9)
64 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8)
65 #define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI (2 << 1)
66 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1)
67 #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0)
69 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0
70 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1
71 #define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2
72 #define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3
73 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4
74 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5
75 #define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6
76 #define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7
77 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA
78 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB
80 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num)
81 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num)
82 #define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num)
83 #define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num)
84 #define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num)
85 #define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num)
86 #define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num)
87 #define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num)
88 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num)
90 #define OMAP_REV2_TLL_CHANNEL_COUNT 2
91 #define OMAP_TLL_CHANNEL_COUNT 3
92 #define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0)
93 #define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1)
94 #define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2)
96 /* Values of USBTLL_REVISION - Note: these are not given in the TRM */
97 #define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */
98 #define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */
99 #define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */
100 #define OMAP_USBTLL_REV4 0x00000006 /* OMAP5 */
102 #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
104 /* only PHY and UNUSED modes don't need TLL */
105 #define omap_usb_mode_needs_tll(x) ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\
106 (x) != OMAP_EHCI_PORT_MODE_PHY)
108 struct usbtll_omap {
109 int nch; /* num. of channels */
110 struct clk **ch_clk;
111 void __iomem *base;
114 /*-------------------------------------------------------------------------*/
116 static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
117 static struct device *tll_dev;
118 static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */
120 /*-------------------------------------------------------------------------*/
122 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
124 __raw_writel(val, base + reg);
127 static inline u32 usbtll_read(void __iomem *base, u32 reg)
129 return __raw_readl(base + reg);
132 static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val)
134 __raw_writeb(val, base + reg);
137 static inline u8 usbtll_readb(void __iomem *base, u8 reg)
139 return __raw_readb(base + reg);
142 /*-------------------------------------------------------------------------*/
144 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
146 switch (pmode) {
147 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
148 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
149 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
150 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
151 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
152 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
153 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
154 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
155 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
156 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
157 return true;
159 default:
160 return false;
165 * convert the port-mode enum to a value we can use in the FSLSMODE
166 * field of USBTLL_CHANNEL_CONF
168 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
170 switch (mode) {
171 case OMAP_USBHS_PORT_MODE_UNUSED:
172 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
173 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
175 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
176 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
178 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
179 return OMAP_TLL_FSLSMODE_3PIN_PHY;
181 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
182 return OMAP_TLL_FSLSMODE_4PIN_PHY;
184 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
185 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
187 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
188 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
190 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
191 return OMAP_TLL_FSLSMODE_3PIN_TLL;
193 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
194 return OMAP_TLL_FSLSMODE_4PIN_TLL;
196 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
197 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
199 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
200 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
201 default:
202 pr_warn("Invalid port mode, using default\n");
203 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
208 * usbtll_omap_probe - initialize TI-based HCDs
210 * Allocates basic resources for this USB host controller.
212 static int usbtll_omap_probe(struct platform_device *pdev)
214 struct device *dev = &pdev->dev;
215 struct resource *res;
216 struct usbtll_omap *tll;
217 int ret = 0;
218 int i, ver;
220 dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
222 tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
223 if (!tll) {
224 dev_err(dev, "Memory allocation failed\n");
225 return -ENOMEM;
228 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
229 tll->base = devm_ioremap_resource(dev, res);
230 if (IS_ERR(tll->base))
231 return PTR_ERR(tll->base);
233 platform_set_drvdata(pdev, tll);
234 pm_runtime_enable(dev);
235 pm_runtime_get_sync(dev);
237 ver = usbtll_read(tll->base, OMAP_USBTLL_REVISION);
238 switch (ver) {
239 case OMAP_USBTLL_REV1:
240 case OMAP_USBTLL_REV4:
241 tll->nch = OMAP_TLL_CHANNEL_COUNT;
242 break;
243 case OMAP_USBTLL_REV2:
244 case OMAP_USBTLL_REV3:
245 tll->nch = OMAP_REV2_TLL_CHANNEL_COUNT;
246 break;
247 default:
248 tll->nch = OMAP_TLL_CHANNEL_COUNT;
249 dev_dbg(dev,
250 "USB TLL Rev : 0x%x not recognized, assuming %d channels\n",
251 ver, tll->nch);
252 break;
255 tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk * [tll->nch]),
256 GFP_KERNEL);
257 if (!tll->ch_clk) {
258 ret = -ENOMEM;
259 dev_err(dev, "Couldn't allocate memory for channel clocks\n");
260 goto err_clk_alloc;
263 for (i = 0; i < tll->nch; i++) {
264 char clkname[] = "usb_tll_hs_usb_chx_clk";
266 snprintf(clkname, sizeof(clkname),
267 "usb_tll_hs_usb_ch%d_clk", i);
268 tll->ch_clk[i] = clk_get(dev, clkname);
270 if (IS_ERR(tll->ch_clk[i]))
271 dev_dbg(dev, "can't get clock : %s\n", clkname);
274 pm_runtime_put_sync(dev);
275 /* only after this can omap_tll_enable/disable work */
276 spin_lock(&tll_lock);
277 tll_dev = dev;
278 spin_unlock(&tll_lock);
280 return 0;
282 err_clk_alloc:
283 pm_runtime_put_sync(dev);
284 pm_runtime_disable(dev);
286 return ret;
290 * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
291 * @pdev: USB Host Controller being removed
293 * Reverses the effect of usbtll_omap_probe().
295 static int usbtll_omap_remove(struct platform_device *pdev)
297 struct usbtll_omap *tll = platform_get_drvdata(pdev);
298 int i;
300 spin_lock(&tll_lock);
301 tll_dev = NULL;
302 spin_unlock(&tll_lock);
304 for (i = 0; i < tll->nch; i++)
305 if (!IS_ERR(tll->ch_clk[i]))
306 clk_put(tll->ch_clk[i]);
308 pm_runtime_disable(&pdev->dev);
309 return 0;
312 static const struct of_device_id usbtll_omap_dt_ids[] = {
313 { .compatible = "ti,usbhs-tll" },
317 MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
319 static struct platform_driver usbtll_omap_driver = {
320 .driver = {
321 .name = (char *)usbtll_driver_name,
322 .owner = THIS_MODULE,
323 .of_match_table = of_match_ptr(usbtll_omap_dt_ids),
325 .probe = usbtll_omap_probe,
326 .remove = usbtll_omap_remove,
329 int omap_tll_init(struct usbhs_omap_platform_data *pdata)
331 int i;
332 bool needs_tll;
333 unsigned reg;
334 struct usbtll_omap *tll;
336 spin_lock(&tll_lock);
338 if (!tll_dev) {
339 spin_unlock(&tll_lock);
340 return -ENODEV;
343 tll = dev_get_drvdata(tll_dev);
345 needs_tll = false;
346 for (i = 0; i < tll->nch; i++)
347 needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
349 pm_runtime_get_sync(tll_dev);
351 if (needs_tll) {
352 void __iomem *base = tll->base;
354 /* Program Common TLL register */
355 reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
356 reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
357 | OMAP_TLL_SHARED_CONF_USB_DIVRATION);
358 reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
359 reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
361 usbtll_write(base, OMAP_TLL_SHARED_CONF, reg);
363 /* Enable channels now */
364 for (i = 0; i < tll->nch; i++) {
365 reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i));
367 if (is_ohci_port(pdata->port_mode[i])) {
368 reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
369 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
370 reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
371 } else if (pdata->port_mode[i] ==
372 OMAP_EHCI_PORT_MODE_TLL) {
374 * Disable AutoIdle, BitStuffing
375 * and use SDR Mode
377 reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
378 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
379 | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
380 } else if (pdata->port_mode[i] ==
381 OMAP_EHCI_PORT_MODE_HSIC) {
383 * HSIC Mode requires UTMI port configurations
385 reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS
386 | OMAP_TLL_CHANNEL_CONF_CHRGVBUS
387 | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI
388 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
389 } else {
390 continue;
392 reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
393 usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg);
395 usbtll_writeb(base,
396 OMAP_TLL_ULPI_SCRATCH_REGISTER(i),
397 0xbe);
401 pm_runtime_put_sync(tll_dev);
403 spin_unlock(&tll_lock);
405 return 0;
407 EXPORT_SYMBOL_GPL(omap_tll_init);
409 int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
411 int i;
412 struct usbtll_omap *tll;
414 spin_lock(&tll_lock);
416 if (!tll_dev) {
417 spin_unlock(&tll_lock);
418 return -ENODEV;
421 tll = dev_get_drvdata(tll_dev);
423 pm_runtime_get_sync(tll_dev);
425 for (i = 0; i < tll->nch; i++) {
426 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
427 int r;
429 if (IS_ERR(tll->ch_clk[i]))
430 continue;
432 r = clk_enable(tll->ch_clk[i]);
433 if (r) {
434 dev_err(tll_dev,
435 "Error enabling ch %d clock: %d\n", i, r);
440 spin_unlock(&tll_lock);
442 return 0;
444 EXPORT_SYMBOL_GPL(omap_tll_enable);
446 int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
448 int i;
449 struct usbtll_omap *tll;
451 spin_lock(&tll_lock);
453 if (!tll_dev) {
454 spin_unlock(&tll_lock);
455 return -ENODEV;
458 tll = dev_get_drvdata(tll_dev);
460 for (i = 0; i < tll->nch; i++) {
461 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
462 if (!IS_ERR(tll->ch_clk[i]))
463 clk_disable(tll->ch_clk[i]);
467 pm_runtime_put_sync(tll_dev);
469 spin_unlock(&tll_lock);
471 return 0;
473 EXPORT_SYMBOL_GPL(omap_tll_disable);
475 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
476 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
477 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
478 MODULE_LICENSE("GPL v2");
479 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers");
481 static int __init omap_usbtll_drvinit(void)
483 return platform_driver_register(&usbtll_omap_driver);
487 * init before usbhs core driver;
488 * The usbtll driver should be initialized before
489 * the usbhs core driver probe function is called.
491 fs_initcall(omap_usbtll_drvinit);
493 static void __exit omap_usbtll_drvexit(void)
495 platform_driver_unregister(&usbtll_omap_driver);
497 module_exit(omap_usbtll_drvexit);