2 # SATA/PATA driver configuration
5 config HAVE_PATA_PLATFORM
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
14 tristate "Serial ATA and Parallel ATA drivers"
17 depends on !(M32R || M68K || S390) || BROKEN
20 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
21 any other ATA device under Linux, say Y and make sure that you know
22 the name of your ATA host adapter (the card inside your computer
23 that "speaks" the ATA protocol, also called ATA controller),
24 because you will be asked for it.
26 NOTE: ATA enables basic SCSI support; *however*,
27 'SCSI disk support', 'SCSI tape support', or
28 'SCSI CDROM support' may also be needed,
29 depending on your hardware configuration.
33 config ATA_NONSTANDARD
37 config ATA_VERBOSE_ERROR
38 bool "Verbose ATA error reporting"
41 This option adds parsing of ATA command descriptions and error bits
42 in libata kernel output, making it easier to interpret.
43 This option will enlarge the kernel by approx. 6KB. Disable it only
44 if kernel size is more important than ease of debugging.
49 bool "ATA ACPI Support"
50 depends on ACPI && PCI
53 This option adds support for ATA-related ACPI objects.
54 These ACPI objects add the ability to retrieve taskfiles
55 from the ACPI BIOS and write them to the disk controller.
56 These objects may be related to performance, security,
57 power management, or other areas.
58 You can disable this at kernel boot time by using the
59 option libata.noacpi=1
62 bool "SATA Port Multiplier support"
65 This option adds support for SATA Port Multipliers
66 (the SATA version of an ethernet hub, or SAS expander).
68 comment "Controllers with non-SFF native interface"
71 tristate "AHCI SATA support"
74 This option enables support for AHCI Serial ATA.
78 config SATA_AHCI_PLATFORM
79 tristate "Platform AHCI SATA support"
81 This option enables support for Platform AHCI Serial ATA
87 tristate "Freescale 3.0Gbps SATA support"
90 This option enables support for Freescale 3.0Gbps SATA controller.
91 It can be found on MPC837x and MPC8315.
96 tristate "Initio 162x SATA support"
99 This option enables support for Initio 162x Serial ATA.
101 config SATA_ACARD_AHCI
102 tristate "ACard AHCI variant (ATP 8620)"
105 This option enables support for Acard.
110 tristate "Silicon Image 3124/3132 SATA support"
113 This option enables support for Silicon Image 3124/3132 Serial ATA.
118 bool "ATA SFF support (for legacy IDE and PATA)"
121 This option adds support for ATA controllers with SFF
122 compliant or similar programming interface.
124 SFF is the legacy IDE interface that has been around since
125 the dawn of time. Almost all PATA controllers have an
126 SFF interface. Many SATA controllers have an SFF interface
127 when configured into a legacy compatibility mode.
129 For users with exclusively modern controllers like AHCI,
130 Silicon Image 3124, or Marvell 6440, you may choose to
131 disable this unneeded SFF support.
137 comment "SFF controllers with custom DMA interface"
140 tristate "Pacific Digital ADMA support"
143 This option enables support for Pacific Digital ADMA controllers
147 config PATA_OCTEON_CF
148 tristate "OCTEON Boot Bus Compact Flash support"
149 depends on CPU_CAVIUM_OCTEON
151 This option enables a polled compact flash driver for use with
152 compact flash cards attached to the OCTEON boot bus.
157 tristate "Pacific Digital SATA QStor support"
160 This option enables support for Pacific Digital Serial ATA QStor.
165 tristate "Promise SATA SX4 support (Experimental)"
168 This option enables support for Promise Serial ATA SX4.
173 bool "ATA BMDMA support"
176 This option adds support for SFF ATA controllers with BMDMA
177 capability. BMDMA stands for bus-master DMA and is the
178 de facto DMA interface for SFF controllers.
184 comment "SATA SFF controllers with BMDMA"
187 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
190 This option enables support for ICH5/6/7/8 Serial ATA
191 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
197 tristate "DesignWare Cores SATA support"
200 This option enables support for the on-chip SATA controller of the
201 AppliedMicro processor 460EX.
205 config SATA_DWC_DEBUG
206 bool "Debugging driver version"
209 This option enables debugging output in the driver.
211 config SATA_DWC_VDEBUG
212 bool "Verbose debug output"
213 depends on SATA_DWC_DEBUG
215 This option enables the taskfile dumping and NCQ debugging.
218 tristate "Calxeda Highbank SATA support"
220 This option enables support for the Calxeda Highbank SoC's
226 tristate "Marvell SATA support"
228 This option enables support for the Marvell Serial ATA family.
229 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
230 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
235 tristate "NVIDIA SATA support"
238 This option enables support for NVIDIA Serial ATA.
243 tristate "Promise SATA TX2/TX4 support"
246 This option enables support for Promise Serial ATA TX2/TX4.
251 tristate "Silicon Image SATA support"
254 This option enables support for Silicon Image Serial ATA.
259 tristate "SiS 964/965/966/180 SATA support"
263 This option enables support for SiS Serial ATA on
264 SiS 964/965/966/180 and Parallel ATA on SiS 180.
265 The PATA support for SiS 180 requires additionally to
266 enable the PATA_SIS driver in the config.
270 tristate "ServerWorks Frodo / Apple K2 SATA support"
273 This option enables support for Broadcom/Serverworks/Apple K2
279 tristate "ULi Electronics SATA support"
282 This option enables support for ULi Electronics SATA.
287 tristate "VIA SATA support"
290 This option enables support for VIA Serial ATA.
295 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
298 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
302 comment "PATA SFF controllers with BMDMA"
305 tristate "ALi PATA support"
308 This option enables support for the ALi ATA interfaces
309 found on the many ALi chipsets.
314 tristate "AMD/NVidia PATA support"
317 This option enables support for the AMD and NVidia PATA
318 interfaces found on the chipsets for Athlon/Athlon64.
322 config PATA_ARASAN_CF
323 tristate "ARASAN CompactFlash PATA Controller Support"
324 depends on DMADEVICES
327 Say Y here to support the ARASAN CompactFlash PATA controller
330 tristate "ARTOP 6210/6260 PATA support"
333 This option enables support for ARTOP PATA controllers.
338 tristate "ATI PATA support"
341 This option enables support for the ATI ATA interfaces
342 found on the many ATI chipsets.
347 tristate "ARTOP/Acard ATP867X PATA support"
350 This option enables support for ARTOP/Acard ATP867X PATA
356 tristate "Blackfin 54x ATAPI support"
357 depends on BF542 || BF548 || BF549
359 This option enables support for the built-in ATAPI controller on
360 Blackfin 54x family chips.
365 tristate "CMD64x PATA support"
368 This option enables support for the CMD64x series chips
369 except for the CMD640.
374 tristate "CS5510/5520 PATA support"
377 This option enables support for the Cyrix 5510/5520
378 companion chip used with the MediaGX/Geode processor family.
383 tristate "CS5530 PATA support"
386 This option enables support for the Cyrix/NatSemi/AMD CS5530
387 companion chip used with the MediaGX/Geode processor family.
392 tristate "CS5535 PATA support (Experimental)"
393 depends on PCI && X86 && !X86_64
395 This option enables support for the NatSemi/AMD CS5535
396 companion chip used with the Geode processor family.
401 tristate "CS5536 PATA support"
404 This option enables support for the AMD CS5536
405 companion chip used with the Geode LX processor family.
410 tristate "Cypress CY82C693 PATA support (Very Experimental)"
413 This option enables support for the Cypress/Contaq CY82C693
414 chipset found in some Alpha systems
419 tristate "EFAR SLC90E66 support"
422 This option enables support for the EFAR SLC90E66
423 IDE controller found on some older machines.
428 tristate "Cirrus Logic EP93xx PATA support"
429 depends on ARCH_EP93XX
431 This option enables support for the PATA controller in
432 the Cirrus Logic EP9312 and EP9315 ARM CPU.
437 tristate "HPT 366/368 PATA support"
440 This option enables support for the HPT 366 and 368
441 PATA controllers via the new ATA layer.
446 tristate "HPT 370/370A/371/372/374/302 PATA support"
449 This option enables support for the majority of the later HPT
450 PATA controllers via the new ATA layer.
455 tristate "HPT 371N/372N/302N PATA support"
458 This option enables support for the N variant HPT PATA
459 controllers via the new ATA layer.
464 tristate "HPT 343/363 PATA support"
467 This option enables support for the HPT 343/363
468 PATA controllers via the new ATA layer
472 config PATA_HPT3X3_DMA
473 bool "HPT 343/363 DMA support"
474 depends on PATA_HPT3X3
476 This option enables DMA support for the HPT343/363
477 controllers. Enable with care as there are still some
478 problems with DMA on this chipset.
481 tristate "Acorn ICS PATA support"
482 depends on ARM && ARCH_ACORN
484 On Acorn systems, say Y here if you wish to use the ICS PATA
485 interface card. This is not required for ICS partition support.
486 If you are unsure, say N to this.
489 tristate "PATA support for Freescale iMX"
492 This option enables support for the PATA host available on Freescale
498 tristate "IT8213 PATA support (Experimental)"
501 This option enables support for the ITE 821 PATA
502 controllers via the new ATA layer.
507 tristate "IT8211/2 PATA support"
510 This option enables support for the ITE 8211 and 8212
511 PATA controllers via the new ATA layer, including RAID
517 tristate "JMicron PATA support"
520 Enable support for the JMicron IDE controller, via the new
526 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
529 Most IDE capable PowerMacs have IDE busses driven by a variant
530 of this controller which is part of the Apple chipset used on
531 most PowerMac models. Some models have multiple busses using
532 different chipsets, though generally, MacIO is one of them.
535 tristate "Marvell PATA support via legacy mode"
538 This option enables limited support for the Marvell 88SE61xx ATA
539 controllers. If you wish to use only the SATA ports then select
540 the AHCI driver alone. If you wish to the use the PATA port or
541 both SATA and PATA include this driver.
546 tristate "Freescale MPC52xx SoC internal IDE"
547 depends on PPC_MPC52xx && PPC_BESTCOMM
548 select PPC_BESTCOMM_ATA
550 This option enables support for integrated IDE controller
551 of the Freescale MPC52xx SoC.
556 tristate "NETCELL Revolution RAID support"
559 This option enables support for the Netcell Revolution RAID
565 tristate "Ninja32/Delkin Cardbus ATA support"
568 This option enables support for the Ninja32, Delkin and
569 possibly other brands of Cardbus ATA adapter
574 tristate "Nat Semi NS87415 PATA support"
577 This option enables support for the National Semiconductor
578 NS87415 PCI-IDE controller.
583 tristate "Intel PATA old PIIX support"
586 This option enables support for early PIIX PATA support.
591 tristate "OPTI FireStar PATA support (Very Experimental)"
594 This option enables DMA/PIO support for the later OPTi
595 controllers found on some old motherboards and in some
601 tristate "Promise PATA 2027x support"
604 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
609 tristate "Older Promise PATA controller support"
612 This option enables support for the Promise 20246, 20262, 20263,
613 20265 and 20267 adapters.
618 tristate "RADISYS 82600 PATA support (Experimental)"
621 This option enables support for the RADISYS 82600
622 PATA controllers via the new ATA layer
627 tristate "RDC PATA support"
630 This option enables basic support for the later RDC PATA controllers
631 controllers via the new ATA layer. For the RDC 1010, you need to
632 enable the IT821X driver instead.
637 tristate "SC1200 PATA support"
640 This option enables support for the NatSemi/AMD SC1200 SoC
641 companion chip used with the Geode processor family.
646 tristate "Toshiba's Cell Reference Set IDE support"
647 depends on PCI && PPC_CELLEB
649 This option enables support for the built-in IDE controller on
650 Toshiba Cell Reference Board.
655 tristate "Intel SCH PATA support"
658 This option enables support for Intel SCH PATA on the Intel
659 SCH (US15W, US15L, UL11L) series host controllers.
663 config PATA_SERVERWORKS
664 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
667 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
668 HT1000 PATA controllers, via the new ATA layer.
673 tristate "CMD / Silicon Image 680 PATA support"
676 This option enables support for CMD / Silicon Image 680 PATA.
681 tristate "SiS PATA support"
684 This option enables support for SiS PATA controllers
689 tristate "Toshiba Piccolo support (Experimental)"
692 Support for the Toshiba Piccolo controllers. Currently only the
693 primary channel is supported by this driver.
698 tristate "Compaq Triflex PATA support"
701 Enable support for the Compaq 'Triflex' IDE controller as found
702 on many Compaq Pentium-Pro systems, via the new ATA layer.
707 tristate "VIA PATA support"
710 This option enables support for the VIA PATA interfaces
711 found on the many VIA chipsets.
716 tristate "PXA DMA-capable PATA support"
719 This option enables support for harddrive attached to PXA CPU's bus.
721 NOTE: This driver utilizes PXA DMA controller, in case your hardware
722 is not capable of doing MWDMA, use pata_platform instead.
727 tristate "Winbond SL82C105 PATA support"
730 This option enables support for SL82C105 PATA devices found in the
731 Netwinder and some other systems
737 comment "PIO-only SFF controllers"
740 tristate "Atmel AVR32 PATA support (Experimental)"
741 depends on AVR32 && PLATFORM_AT32AP
743 This option enables support for the IDE devices on the
744 Atmel AT32AP platform.
749 tristate "PATA support for AT91SAM9260"
750 depends on ARM && ARCH_AT91
752 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
756 config PATA_CMD640_PCI
757 tristate "CMD640 PCI PATA support (Experimental)"
760 This option enables support for the CMD640 PCI IDE
761 interface chip. Only the primary channel is currently
767 tristate "ISA Plug and Play PATA support"
770 This option enables support for ISA plug & play ATA
771 controllers such as those found on old soundcards.
775 config PATA_IXP4XX_CF
776 tristate "IXP4XX Compact Flash support"
777 depends on ARCH_IXP4XX
779 This option enables support for a Compact Flash connected on
780 the ixp4xx expansion bus. This driver had been written for
781 Loft/Avila boards in mind but can work with others.
786 tristate "Intel PATA MPIIX support"
789 This option enables support for MPIIX PATA support.
794 tristate "Nat Semi NS87410 PATA support"
797 This option enables support for the National Semiconductor
798 NS87410 PCI-IDE controller.
803 tristate "OPTI621/6215 PATA support (Very Experimental)"
806 This option enables full PIO support for the early Opti ATA
807 controllers found on some old motherboards.
812 tristate "Palm LifeDrive PATA support"
813 depends on MACH_PALMLD
815 This option enables support for Palm LifeDrive's internal ATA
816 port via the new ATA layer.
821 tristate "PCMCIA PATA support"
824 This option enables support for PCMCIA ATA interfaces, including
825 compact flash card adapters via the new ATA layer.
830 tristate "Generic platform device PATA support"
831 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
833 This option enables support for generic directly connected ATA
834 devices commonly found on embedded systems.
838 config PATA_OF_PLATFORM
839 tristate "OpenFirmware platform device PATA support"
840 depends on PATA_PLATFORM && OF
842 This option enables support for generic directly connected ATA
843 devices commonly found on embedded systems with OpenFirmware
849 tristate "QDI VLB PATA support"
853 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
856 tristate "RouterBoard 532 PATA CompactFlash support"
857 depends on MIKROTIK_RB532
859 This option enables support for the RouterBoard 532
860 PATA CompactFlash controller.
865 tristate "PC Tech RZ1000 PATA support"
868 This option enables basic support for the PC Tech RZ1000/1
869 PATA controllers via the new ATA layer
873 config PATA_SAMSUNG_CF
874 tristate "Samsung SoC PATA support"
875 depends on SAMSUNG_DEV_IDE
877 This option enables basic support for Samsung's S3C/S5P board
878 PATA controllers via the new ATA layer
882 config PATA_WINBOND_VLB
883 tristate "Winbond W83759A VLB PATA support (Experimental)"
887 Support for the Winbond W83759A controller on Vesa Local Bus
890 comment "Generic fallback / legacy drivers"
893 tristate "ACPI firmware driver for PATA"
894 depends on ATA_ACPI && ATA_BMDMA
896 This option enables an ACPI method driver which drives
897 motherboard PATA controller interfaces through the ACPI
898 firmware in the BIOS. This driver can sometimes handle
899 otherwise unsupported hardware.
902 tristate "Generic ATA support"
903 depends on PCI && ATA_BMDMA
905 This option enables support for generic BIOS configured
906 ATA controllers via the new ATA layer
911 tristate "Legacy ISA PATA support (Experimental)"
912 depends on (ISA || PCI)
914 This option enables support for ISA/VLB/PCI bus legacy PATA
915 ports and allows them to be accessed via the new ATA layer.