2 * linux/kernel/power/swap.c
4 * This file provides functions for reading the suspend image from
5 * and writing it to a swap partition.
7 * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
8 * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
9 * Copyright (C) 2010-2012 Bojan Smojver <bojan@rexursive.com>
11 * This file is released under the GPLv2.
15 #include <linux/module.h>
16 #include <linux/file.h>
17 #include <linux/delay.h>
18 #include <linux/bitops.h>
19 #include <linux/genhd.h>
20 #include <linux/device.h>
21 #include <linux/bio.h>
22 #include <linux/blkdev.h>
23 #include <linux/swap.h>
24 #include <linux/swapops.h>
26 #include <linux/slab.h>
27 #include <linux/lzo.h>
28 #include <linux/vmalloc.h>
29 #include <linux/cpumask.h>
30 #include <linux/atomic.h>
31 #include <linux/kthread.h>
32 #include <linux/crc32.h>
36 #define HIBERNATE_SIG "S1SUSPEND"
39 * The swap map is a data structure used for keeping track of each page
40 * written to a swap partition. It consists of many swap_map_page
41 * structures that contain each an array of MAP_PAGE_ENTRIES swap entries.
42 * These structures are stored on the swap and linked together with the
43 * help of the .next_swap member.
45 * The swap map is created during suspend. The swap map pages are
46 * allocated and populated one at a time, so we only need one memory
47 * page to set up the entire structure.
49 * During resume we pick up all swap_map_page structures into a list.
52 #define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1)
55 * Number of free pages that are not high.
57 static inline unsigned long low_free_pages(void)
59 return nr_free_pages() - nr_free_highpages();
63 * Number of pages required to be kept free while writing the image. Always
64 * half of all available low pages before the writing starts.
66 static inline unsigned long reqd_free_pages(void)
68 return low_free_pages() / 2;
71 struct swap_map_page
{
72 sector_t entries
[MAP_PAGE_ENTRIES
];
76 struct swap_map_page_list
{
77 struct swap_map_page
*map
;
78 struct swap_map_page_list
*next
;
82 * The swap_map_handle structure is used for handling swap in
86 struct swap_map_handle
{
87 struct swap_map_page
*cur
;
88 struct swap_map_page_list
*maps
;
90 sector_t first_sector
;
92 unsigned long reqd_free_pages
;
96 struct swsusp_header
{
97 char reserved
[PAGE_SIZE
- 20 - sizeof(sector_t
) - sizeof(int) -
101 unsigned int flags
; /* Flags to pass to the "boot" kernel */
104 } __attribute__((packed
));
106 static struct swsusp_header
*swsusp_header
;
109 * The following functions are used for tracing the allocated
110 * swap pages, so that they can be freed in case of an error.
113 struct swsusp_extent
{
119 static struct rb_root swsusp_extents
= RB_ROOT
;
121 static int swsusp_extents_insert(unsigned long swap_offset
)
123 struct rb_node
**new = &(swsusp_extents
.rb_node
);
124 struct rb_node
*parent
= NULL
;
125 struct swsusp_extent
*ext
;
127 /* Figure out where to put the new node */
129 ext
= rb_entry(*new, struct swsusp_extent
, node
);
131 if (swap_offset
< ext
->start
) {
133 if (swap_offset
== ext
->start
- 1) {
137 new = &((*new)->rb_left
);
138 } else if (swap_offset
> ext
->end
) {
140 if (swap_offset
== ext
->end
+ 1) {
144 new = &((*new)->rb_right
);
146 /* It already is in the tree */
150 /* Add the new node and rebalance the tree. */
151 ext
= kzalloc(sizeof(struct swsusp_extent
), GFP_KERNEL
);
155 ext
->start
= swap_offset
;
156 ext
->end
= swap_offset
;
157 rb_link_node(&ext
->node
, parent
, new);
158 rb_insert_color(&ext
->node
, &swsusp_extents
);
163 * alloc_swapdev_block - allocate a swap page and register that it has
164 * been allocated, so that it can be freed in case of an error.
167 sector_t
alloc_swapdev_block(int swap
)
169 unsigned long offset
;
171 offset
= swp_offset(get_swap_page_of_type(swap
));
173 if (swsusp_extents_insert(offset
))
174 swap_free(swp_entry(swap
, offset
));
176 return swapdev_block(swap
, offset
);
182 * free_all_swap_pages - free swap pages allocated for saving image data.
183 * It also frees the extents used to register which swap entries had been
187 void free_all_swap_pages(int swap
)
189 struct rb_node
*node
;
191 while ((node
= swsusp_extents
.rb_node
)) {
192 struct swsusp_extent
*ext
;
193 unsigned long offset
;
195 ext
= container_of(node
, struct swsusp_extent
, node
);
196 rb_erase(node
, &swsusp_extents
);
197 for (offset
= ext
->start
; offset
<= ext
->end
; offset
++)
198 swap_free(swp_entry(swap
, offset
));
204 int swsusp_swap_in_use(void)
206 return (swsusp_extents
.rb_node
!= NULL
);
213 static unsigned short root_swap
= 0xffff;
214 struct block_device
*hib_resume_bdev
;
220 static int mark_swapfiles(struct swap_map_handle
*handle
, unsigned int flags
)
224 hib_bio_read_page(swsusp_resume_block
, swsusp_header
, NULL
);
225 if (!memcmp("SWAP-SPACE",swsusp_header
->sig
, 10) ||
226 !memcmp("SWAPSPACE2",swsusp_header
->sig
, 10)) {
227 memcpy(swsusp_header
->orig_sig
,swsusp_header
->sig
, 10);
228 memcpy(swsusp_header
->sig
, HIBERNATE_SIG
, 10);
229 swsusp_header
->image
= handle
->first_sector
;
230 swsusp_header
->flags
= flags
;
231 if (flags
& SF_CRC32_MODE
)
232 swsusp_header
->crc32
= handle
->crc32
;
233 error
= hib_bio_write_page(swsusp_resume_block
,
234 swsusp_header
, NULL
);
236 printk(KERN_ERR
"PM: Swap header not found!\n");
243 * swsusp_swap_check - check if the resume device is a swap device
244 * and get its index (if so)
246 * This is called before saving image
248 static int swsusp_swap_check(void)
252 res
= swap_type_of(swsusp_resume_device
, swsusp_resume_block
,
258 res
= blkdev_get(hib_resume_bdev
, FMODE_WRITE
, NULL
);
262 res
= set_blocksize(hib_resume_bdev
, PAGE_SIZE
);
264 blkdev_put(hib_resume_bdev
, FMODE_WRITE
);
270 * write_page - Write one page to given swap location.
271 * @buf: Address we're writing.
272 * @offset: Offset of the swap page we're writing to.
273 * @bio_chain: Link the next write BIO here
276 static int write_page(void *buf
, sector_t offset
, struct bio
**bio_chain
)
285 src
= (void *)__get_free_page(__GFP_WAIT
| __GFP_NOWARN
|
290 ret
= hib_wait_on_bio_chain(bio_chain
); /* Free pages */
293 src
= (void *)__get_free_page(__GFP_WAIT
|
300 bio_chain
= NULL
; /* Go synchronous */
307 return hib_bio_write_page(offset
, src
, bio_chain
);
310 static void release_swap_writer(struct swap_map_handle
*handle
)
313 free_page((unsigned long)handle
->cur
);
317 static int get_swap_writer(struct swap_map_handle
*handle
)
321 ret
= swsusp_swap_check();
324 printk(KERN_ERR
"PM: Cannot find swap device, try "
328 handle
->cur
= (struct swap_map_page
*)get_zeroed_page(GFP_KERNEL
);
333 handle
->cur_swap
= alloc_swapdev_block(root_swap
);
334 if (!handle
->cur_swap
) {
339 handle
->reqd_free_pages
= reqd_free_pages();
340 handle
->first_sector
= handle
->cur_swap
;
343 release_swap_writer(handle
);
345 swsusp_close(FMODE_WRITE
);
349 static int swap_write_page(struct swap_map_handle
*handle
, void *buf
,
350 struct bio
**bio_chain
)
357 offset
= alloc_swapdev_block(root_swap
);
358 error
= write_page(buf
, offset
, bio_chain
);
361 handle
->cur
->entries
[handle
->k
++] = offset
;
362 if (handle
->k
>= MAP_PAGE_ENTRIES
) {
363 offset
= alloc_swapdev_block(root_swap
);
366 handle
->cur
->next_swap
= offset
;
367 error
= write_page(handle
->cur
, handle
->cur_swap
, bio_chain
);
370 clear_page(handle
->cur
);
371 handle
->cur_swap
= offset
;
374 if (bio_chain
&& low_free_pages() <= handle
->reqd_free_pages
) {
375 error
= hib_wait_on_bio_chain(bio_chain
);
379 * Recalculate the number of required free pages, to
380 * make sure we never take more than half.
382 handle
->reqd_free_pages
= reqd_free_pages();
389 static int flush_swap_writer(struct swap_map_handle
*handle
)
391 if (handle
->cur
&& handle
->cur_swap
)
392 return write_page(handle
->cur
, handle
->cur_swap
, NULL
);
397 static int swap_writer_finish(struct swap_map_handle
*handle
,
398 unsigned int flags
, int error
)
401 flush_swap_writer(handle
);
402 printk(KERN_INFO
"PM: S");
403 error
= mark_swapfiles(handle
, flags
);
408 free_all_swap_pages(root_swap
);
409 release_swap_writer(handle
);
410 swsusp_close(FMODE_WRITE
);
415 /* We need to remember how much compressed data we need to read. */
416 #define LZO_HEADER sizeof(size_t)
418 /* Number of pages/bytes we'll compress at one time. */
419 #define LZO_UNC_PAGES 32
420 #define LZO_UNC_SIZE (LZO_UNC_PAGES * PAGE_SIZE)
422 /* Number of pages/bytes we need for compressed data (worst case). */
423 #define LZO_CMP_PAGES DIV_ROUND_UP(lzo1x_worst_compress(LZO_UNC_SIZE) + \
424 LZO_HEADER, PAGE_SIZE)
425 #define LZO_CMP_SIZE (LZO_CMP_PAGES * PAGE_SIZE)
427 /* Maximum number of threads for compression/decompression. */
428 #define LZO_THREADS 3
430 /* Minimum/maximum number of pages for read buffering. */
431 #define LZO_MIN_RD_PAGES 1024
432 #define LZO_MAX_RD_PAGES 8192
436 * save_image - save the suspend image data
439 static int save_image(struct swap_map_handle
*handle
,
440 struct snapshot_handle
*snapshot
,
441 unsigned int nr_to_write
)
448 struct timeval start
;
451 printk(KERN_INFO
"PM: Saving image data pages (%u pages)...\n",
453 m
= nr_to_write
/ 10;
458 do_gettimeofday(&start
);
460 ret
= snapshot_read_next(snapshot
);
463 ret
= swap_write_page(handle
, data_of(*snapshot
), &bio
);
467 printk(KERN_INFO
"PM: Image saving progress: %3d%%\n",
471 err2
= hib_wait_on_bio_chain(&bio
);
472 do_gettimeofday(&stop
);
476 printk(KERN_INFO
"PM: Image saving done.\n");
477 swsusp_show_speed(&start
, &stop
, nr_to_write
, "Wrote");
482 * Structure used for CRC32.
485 struct task_struct
*thr
; /* thread */
486 atomic_t ready
; /* ready to start flag */
487 atomic_t stop
; /* ready to stop flag */
488 unsigned run_threads
; /* nr current threads */
489 wait_queue_head_t go
; /* start crc update */
490 wait_queue_head_t done
; /* crc update done */
491 u32
*crc32
; /* points to handle's crc32 */
492 size_t *unc_len
[LZO_THREADS
]; /* uncompressed lengths */
493 unsigned char *unc
[LZO_THREADS
]; /* uncompressed data */
497 * CRC32 update function that runs in its own thread.
499 static int crc32_threadfn(void *data
)
501 struct crc_data
*d
= data
;
505 wait_event(d
->go
, atomic_read(&d
->ready
) ||
506 kthread_should_stop());
507 if (kthread_should_stop()) {
509 atomic_set(&d
->stop
, 1);
513 atomic_set(&d
->ready
, 0);
515 for (i
= 0; i
< d
->run_threads
; i
++)
516 *d
->crc32
= crc32_le(*d
->crc32
,
517 d
->unc
[i
], *d
->unc_len
[i
]);
518 atomic_set(&d
->stop
, 1);
524 * Structure used for LZO data compression.
527 struct task_struct
*thr
; /* thread */
528 atomic_t ready
; /* ready to start flag */
529 atomic_t stop
; /* ready to stop flag */
530 int ret
; /* return code */
531 wait_queue_head_t go
; /* start compression */
532 wait_queue_head_t done
; /* compression done */
533 size_t unc_len
; /* uncompressed length */
534 size_t cmp_len
; /* compressed length */
535 unsigned char unc
[LZO_UNC_SIZE
]; /* uncompressed buffer */
536 unsigned char cmp
[LZO_CMP_SIZE
]; /* compressed buffer */
537 unsigned char wrk
[LZO1X_1_MEM_COMPRESS
]; /* compression workspace */
541 * Compression function that runs in its own thread.
543 static int lzo_compress_threadfn(void *data
)
545 struct cmp_data
*d
= data
;
548 wait_event(d
->go
, atomic_read(&d
->ready
) ||
549 kthread_should_stop());
550 if (kthread_should_stop()) {
553 atomic_set(&d
->stop
, 1);
557 atomic_set(&d
->ready
, 0);
559 d
->ret
= lzo1x_1_compress(d
->unc
, d
->unc_len
,
560 d
->cmp
+ LZO_HEADER
, &d
->cmp_len
,
562 atomic_set(&d
->stop
, 1);
569 * save_image_lzo - Save the suspend image data compressed with LZO.
570 * @handle: Swap mam handle to use for saving the image.
571 * @snapshot: Image to read data from.
572 * @nr_to_write: Number of pages to save.
574 static int save_image_lzo(struct swap_map_handle
*handle
,
575 struct snapshot_handle
*snapshot
,
576 unsigned int nr_to_write
)
583 struct timeval start
;
586 unsigned thr
, run_threads
, nr_threads
;
587 unsigned char *page
= NULL
;
588 struct cmp_data
*data
= NULL
;
589 struct crc_data
*crc
= NULL
;
592 * We'll limit the number of threads for compression to limit memory
595 nr_threads
= num_online_cpus() - 1;
596 nr_threads
= clamp_val(nr_threads
, 1, LZO_THREADS
);
598 page
= (void *)__get_free_page(__GFP_WAIT
| __GFP_HIGH
);
600 printk(KERN_ERR
"PM: Failed to allocate LZO page\n");
605 data
= vmalloc(sizeof(*data
) * nr_threads
);
607 printk(KERN_ERR
"PM: Failed to allocate LZO data\n");
611 for (thr
= 0; thr
< nr_threads
; thr
++)
612 memset(&data
[thr
], 0, offsetof(struct cmp_data
, go
));
614 crc
= kmalloc(sizeof(*crc
), GFP_KERNEL
);
616 printk(KERN_ERR
"PM: Failed to allocate crc\n");
620 memset(crc
, 0, offsetof(struct crc_data
, go
));
623 * Start the compression threads.
625 for (thr
= 0; thr
< nr_threads
; thr
++) {
626 init_waitqueue_head(&data
[thr
].go
);
627 init_waitqueue_head(&data
[thr
].done
);
629 data
[thr
].thr
= kthread_run(lzo_compress_threadfn
,
631 "image_compress/%u", thr
);
632 if (IS_ERR(data
[thr
].thr
)) {
633 data
[thr
].thr
= NULL
;
635 "PM: Cannot start compression threads\n");
642 * Start the CRC32 thread.
644 init_waitqueue_head(&crc
->go
);
645 init_waitqueue_head(&crc
->done
);
648 crc
->crc32
= &handle
->crc32
;
649 for (thr
= 0; thr
< nr_threads
; thr
++) {
650 crc
->unc
[thr
] = data
[thr
].unc
;
651 crc
->unc_len
[thr
] = &data
[thr
].unc_len
;
654 crc
->thr
= kthread_run(crc32_threadfn
, crc
, "image_crc32");
655 if (IS_ERR(crc
->thr
)) {
657 printk(KERN_ERR
"PM: Cannot start CRC32 thread\n");
663 * Adjust the number of required free pages after all allocations have
664 * been done. We don't want to run out of pages when writing.
666 handle
->reqd_free_pages
= reqd_free_pages();
669 "PM: Using %u thread(s) for compression.\n"
670 "PM: Compressing and saving image data (%u pages)...\n",
671 nr_threads
, nr_to_write
);
672 m
= nr_to_write
/ 10;
677 do_gettimeofday(&start
);
679 for (thr
= 0; thr
< nr_threads
; thr
++) {
680 for (off
= 0; off
< LZO_UNC_SIZE
; off
+= PAGE_SIZE
) {
681 ret
= snapshot_read_next(snapshot
);
688 memcpy(data
[thr
].unc
+ off
,
689 data_of(*snapshot
), PAGE_SIZE
);
693 "PM: Image saving progress: "
701 data
[thr
].unc_len
= off
;
703 atomic_set(&data
[thr
].ready
, 1);
704 wake_up(&data
[thr
].go
);
710 crc
->run_threads
= thr
;
711 atomic_set(&crc
->ready
, 1);
714 for (run_threads
= thr
, thr
= 0; thr
< run_threads
; thr
++) {
715 wait_event(data
[thr
].done
,
716 atomic_read(&data
[thr
].stop
));
717 atomic_set(&data
[thr
].stop
, 0);
722 printk(KERN_ERR
"PM: LZO compression failed\n");
726 if (unlikely(!data
[thr
].cmp_len
||
728 lzo1x_worst_compress(data
[thr
].unc_len
))) {
730 "PM: Invalid LZO compressed length\n");
735 *(size_t *)data
[thr
].cmp
= data
[thr
].cmp_len
;
738 * Given we are writing one page at a time to disk, we
739 * copy that much from the buffer, although the last
740 * bit will likely be smaller than full page. This is
741 * OK - we saved the length of the compressed data, so
742 * any garbage at the end will be discarded when we
746 off
< LZO_HEADER
+ data
[thr
].cmp_len
;
748 memcpy(page
, data
[thr
].cmp
+ off
, PAGE_SIZE
);
750 ret
= swap_write_page(handle
, page
, &bio
);
756 wait_event(crc
->done
, atomic_read(&crc
->stop
));
757 atomic_set(&crc
->stop
, 0);
761 err2
= hib_wait_on_bio_chain(&bio
);
762 do_gettimeofday(&stop
);
766 printk(KERN_INFO
"PM: Image saving done.\n");
767 swsusp_show_speed(&start
, &stop
, nr_to_write
, "Wrote");
771 kthread_stop(crc
->thr
);
775 for (thr
= 0; thr
< nr_threads
; thr
++)
777 kthread_stop(data
[thr
].thr
);
780 if (page
) free_page((unsigned long)page
);
786 * enough_swap - Make sure we have enough swap to save the image.
788 * Returns TRUE or FALSE after checking the total amount of swap
789 * space avaiable from the resume partition.
792 static int enough_swap(unsigned int nr_pages
, unsigned int flags
)
794 unsigned int free_swap
= count_swap_pages(root_swap
, 1);
795 unsigned int required
;
797 pr_debug("PM: Free swap pages: %u\n", free_swap
);
799 required
= PAGES_FOR_IO
+ nr_pages
;
800 return free_swap
> required
;
804 * swsusp_write - Write entire image and metadata.
805 * @flags: flags to pass to the "boot" kernel in the image header
807 * It is important _NOT_ to umount filesystems at this point. We want
808 * them synced (in case something goes wrong) but we DO not want to mark
809 * filesystem clean: it is not. (And it does not matter, if we resume
810 * correctly, we'll mark system clean, anyway.)
813 int swsusp_write(unsigned int flags
)
815 struct swap_map_handle handle
;
816 struct snapshot_handle snapshot
;
817 struct swsusp_info
*header
;
821 pages
= snapshot_get_image_size();
822 error
= get_swap_writer(&handle
);
824 printk(KERN_ERR
"PM: Cannot get swap writer\n");
827 if (flags
& SF_NOCOMPRESS_MODE
) {
828 if (!enough_swap(pages
, flags
)) {
829 printk(KERN_ERR
"PM: Not enough free swap\n");
834 memset(&snapshot
, 0, sizeof(struct snapshot_handle
));
835 error
= snapshot_read_next(&snapshot
);
836 if (error
< PAGE_SIZE
) {
842 header
= (struct swsusp_info
*)data_of(snapshot
);
843 error
= swap_write_page(&handle
, header
, NULL
);
845 error
= (flags
& SF_NOCOMPRESS_MODE
) ?
846 save_image(&handle
, &snapshot
, pages
- 1) :
847 save_image_lzo(&handle
, &snapshot
, pages
- 1);
850 error
= swap_writer_finish(&handle
, flags
, error
);
855 * The following functions allow us to read data using a swap map
856 * in a file-alike way
859 static void release_swap_reader(struct swap_map_handle
*handle
)
861 struct swap_map_page_list
*tmp
;
863 while (handle
->maps
) {
864 if (handle
->maps
->map
)
865 free_page((unsigned long)handle
->maps
->map
);
867 handle
->maps
= handle
->maps
->next
;
873 static int get_swap_reader(struct swap_map_handle
*handle
,
874 unsigned int *flags_p
)
877 struct swap_map_page_list
*tmp
, *last
;
880 *flags_p
= swsusp_header
->flags
;
882 if (!swsusp_header
->image
) /* how can this happen? */
886 last
= handle
->maps
= NULL
;
887 offset
= swsusp_header
->image
;
889 tmp
= kmalloc(sizeof(*handle
->maps
), GFP_KERNEL
);
891 release_swap_reader(handle
);
894 memset(tmp
, 0, sizeof(*tmp
));
901 tmp
->map
= (struct swap_map_page
*)
902 __get_free_page(__GFP_WAIT
| __GFP_HIGH
);
904 release_swap_reader(handle
);
908 error
= hib_bio_read_page(offset
, tmp
->map
, NULL
);
910 release_swap_reader(handle
);
913 offset
= tmp
->map
->next_swap
;
916 handle
->cur
= handle
->maps
->map
;
920 static int swap_read_page(struct swap_map_handle
*handle
, void *buf
,
921 struct bio
**bio_chain
)
925 struct swap_map_page_list
*tmp
;
929 offset
= handle
->cur
->entries
[handle
->k
];
932 error
= hib_bio_read_page(offset
, buf
, bio_chain
);
935 if (++handle
->k
>= MAP_PAGE_ENTRIES
) {
937 free_page((unsigned long)handle
->maps
->map
);
939 handle
->maps
= handle
->maps
->next
;
942 release_swap_reader(handle
);
944 handle
->cur
= handle
->maps
->map
;
949 static int swap_reader_finish(struct swap_map_handle
*handle
)
951 release_swap_reader(handle
);
957 * load_image - load the image using the swap map handle
958 * @handle and the snapshot handle @snapshot
959 * (assume there are @nr_pages pages to load)
962 static int load_image(struct swap_map_handle
*handle
,
963 struct snapshot_handle
*snapshot
,
964 unsigned int nr_to_read
)
968 struct timeval start
;
974 printk(KERN_INFO
"PM: Loading image data pages (%u pages)...\n",
981 do_gettimeofday(&start
);
983 ret
= snapshot_write_next(snapshot
);
986 ret
= swap_read_page(handle
, data_of(*snapshot
), &bio
);
989 if (snapshot
->sync_read
)
990 ret
= hib_wait_on_bio_chain(&bio
);
994 printk(KERN_INFO
"PM: Image loading progress: %3d%%\n",
998 err2
= hib_wait_on_bio_chain(&bio
);
999 do_gettimeofday(&stop
);
1003 printk(KERN_INFO
"PM: Image loading done.\n");
1004 snapshot_write_finalize(snapshot
);
1005 if (!snapshot_image_loaded(snapshot
))
1008 swsusp_show_speed(&start
, &stop
, nr_to_read
, "Read");
1013 * Structure used for LZO data decompression.
1016 struct task_struct
*thr
; /* thread */
1017 atomic_t ready
; /* ready to start flag */
1018 atomic_t stop
; /* ready to stop flag */
1019 int ret
; /* return code */
1020 wait_queue_head_t go
; /* start decompression */
1021 wait_queue_head_t done
; /* decompression done */
1022 size_t unc_len
; /* uncompressed length */
1023 size_t cmp_len
; /* compressed length */
1024 unsigned char unc
[LZO_UNC_SIZE
]; /* uncompressed buffer */
1025 unsigned char cmp
[LZO_CMP_SIZE
]; /* compressed buffer */
1029 * Deompression function that runs in its own thread.
1031 static int lzo_decompress_threadfn(void *data
)
1033 struct dec_data
*d
= data
;
1036 wait_event(d
->go
, atomic_read(&d
->ready
) ||
1037 kthread_should_stop());
1038 if (kthread_should_stop()) {
1041 atomic_set(&d
->stop
, 1);
1045 atomic_set(&d
->ready
, 0);
1047 d
->unc_len
= LZO_UNC_SIZE
;
1048 d
->ret
= lzo1x_decompress_safe(d
->cmp
+ LZO_HEADER
, d
->cmp_len
,
1049 d
->unc
, &d
->unc_len
);
1050 atomic_set(&d
->stop
, 1);
1057 * load_image_lzo - Load compressed image data and decompress them with LZO.
1058 * @handle: Swap map handle to use for loading data.
1059 * @snapshot: Image to copy uncompressed data into.
1060 * @nr_to_read: Number of pages to load.
1062 static int load_image_lzo(struct swap_map_handle
*handle
,
1063 struct snapshot_handle
*snapshot
,
1064 unsigned int nr_to_read
)
1070 struct timeval start
;
1071 struct timeval stop
;
1074 unsigned i
, thr
, run_threads
, nr_threads
;
1075 unsigned ring
= 0, pg
= 0, ring_size
= 0,
1076 have
= 0, want
, need
, asked
= 0;
1077 unsigned long read_pages
= 0;
1078 unsigned char **page
= NULL
;
1079 struct dec_data
*data
= NULL
;
1080 struct crc_data
*crc
= NULL
;
1083 * We'll limit the number of threads for decompression to limit memory
1086 nr_threads
= num_online_cpus() - 1;
1087 nr_threads
= clamp_val(nr_threads
, 1, LZO_THREADS
);
1089 page
= vmalloc(sizeof(*page
) * LZO_MAX_RD_PAGES
);
1091 printk(KERN_ERR
"PM: Failed to allocate LZO page\n");
1096 data
= vmalloc(sizeof(*data
) * nr_threads
);
1098 printk(KERN_ERR
"PM: Failed to allocate LZO data\n");
1102 for (thr
= 0; thr
< nr_threads
; thr
++)
1103 memset(&data
[thr
], 0, offsetof(struct dec_data
, go
));
1105 crc
= kmalloc(sizeof(*crc
), GFP_KERNEL
);
1107 printk(KERN_ERR
"PM: Failed to allocate crc\n");
1111 memset(crc
, 0, offsetof(struct crc_data
, go
));
1114 * Start the decompression threads.
1116 for (thr
= 0; thr
< nr_threads
; thr
++) {
1117 init_waitqueue_head(&data
[thr
].go
);
1118 init_waitqueue_head(&data
[thr
].done
);
1120 data
[thr
].thr
= kthread_run(lzo_decompress_threadfn
,
1122 "image_decompress/%u", thr
);
1123 if (IS_ERR(data
[thr
].thr
)) {
1124 data
[thr
].thr
= NULL
;
1126 "PM: Cannot start decompression threads\n");
1133 * Start the CRC32 thread.
1135 init_waitqueue_head(&crc
->go
);
1136 init_waitqueue_head(&crc
->done
);
1139 crc
->crc32
= &handle
->crc32
;
1140 for (thr
= 0; thr
< nr_threads
; thr
++) {
1141 crc
->unc
[thr
] = data
[thr
].unc
;
1142 crc
->unc_len
[thr
] = &data
[thr
].unc_len
;
1145 crc
->thr
= kthread_run(crc32_threadfn
, crc
, "image_crc32");
1146 if (IS_ERR(crc
->thr
)) {
1148 printk(KERN_ERR
"PM: Cannot start CRC32 thread\n");
1154 * Set the number of pages for read buffering.
1155 * This is complete guesswork, because we'll only know the real
1156 * picture once prepare_image() is called, which is much later on
1157 * during the image load phase. We'll assume the worst case and
1158 * say that none of the image pages are from high memory.
1160 if (low_free_pages() > snapshot_get_image_size())
1161 read_pages
= (low_free_pages() - snapshot_get_image_size()) / 2;
1162 read_pages
= clamp_val(read_pages
, LZO_MIN_RD_PAGES
, LZO_MAX_RD_PAGES
);
1164 for (i
= 0; i
< read_pages
; i
++) {
1165 page
[i
] = (void *)__get_free_page(i
< LZO_CMP_PAGES
?
1166 __GFP_WAIT
| __GFP_HIGH
:
1167 __GFP_WAIT
| __GFP_NOWARN
|
1171 if (i
< LZO_CMP_PAGES
) {
1174 "PM: Failed to allocate LZO pages\n");
1182 want
= ring_size
= i
;
1185 "PM: Using %u thread(s) for decompression.\n"
1186 "PM: Loading and decompressing image data (%u pages)...\n",
1187 nr_threads
, nr_to_read
);
1188 m
= nr_to_read
/ 10;
1193 do_gettimeofday(&start
);
1195 ret
= snapshot_write_next(snapshot
);
1200 for (i
= 0; !eof
&& i
< want
; i
++) {
1201 ret
= swap_read_page(handle
, page
[ring
], &bio
);
1204 * On real read error, finish. On end of data,
1205 * set EOF flag and just exit the read loop.
1208 handle
->cur
->entries
[handle
->k
]) {
1215 if (++ring
>= ring_size
)
1222 * We are out of data, wait for some more.
1228 ret
= hib_wait_on_bio_chain(&bio
);
1237 if (crc
->run_threads
) {
1238 wait_event(crc
->done
, atomic_read(&crc
->stop
));
1239 atomic_set(&crc
->stop
, 0);
1240 crc
->run_threads
= 0;
1243 for (thr
= 0; have
&& thr
< nr_threads
; thr
++) {
1244 data
[thr
].cmp_len
= *(size_t *)page
[pg
];
1245 if (unlikely(!data
[thr
].cmp_len
||
1247 lzo1x_worst_compress(LZO_UNC_SIZE
))) {
1249 "PM: Invalid LZO compressed length\n");
1254 need
= DIV_ROUND_UP(data
[thr
].cmp_len
+ LZO_HEADER
,
1265 off
< LZO_HEADER
+ data
[thr
].cmp_len
;
1267 memcpy(data
[thr
].cmp
+ off
,
1268 page
[pg
], PAGE_SIZE
);
1271 if (++pg
>= ring_size
)
1275 atomic_set(&data
[thr
].ready
, 1);
1276 wake_up(&data
[thr
].go
);
1280 * Wait for more data while we are decompressing.
1282 if (have
< LZO_CMP_PAGES
&& asked
) {
1283 ret
= hib_wait_on_bio_chain(&bio
);
1292 for (run_threads
= thr
, thr
= 0; thr
< run_threads
; thr
++) {
1293 wait_event(data
[thr
].done
,
1294 atomic_read(&data
[thr
].stop
));
1295 atomic_set(&data
[thr
].stop
, 0);
1297 ret
= data
[thr
].ret
;
1301 "PM: LZO decompression failed\n");
1305 if (unlikely(!data
[thr
].unc_len
||
1306 data
[thr
].unc_len
> LZO_UNC_SIZE
||
1307 data
[thr
].unc_len
& (PAGE_SIZE
- 1))) {
1309 "PM: Invalid LZO uncompressed length\n");
1315 off
< data
[thr
].unc_len
; off
+= PAGE_SIZE
) {
1316 memcpy(data_of(*snapshot
),
1317 data
[thr
].unc
+ off
, PAGE_SIZE
);
1319 if (!(nr_pages
% m
))
1321 "PM: Image loading progress: "
1326 ret
= snapshot_write_next(snapshot
);
1328 crc
->run_threads
= thr
+ 1;
1329 atomic_set(&crc
->ready
, 1);
1336 crc
->run_threads
= thr
;
1337 atomic_set(&crc
->ready
, 1);
1342 if (crc
->run_threads
) {
1343 wait_event(crc
->done
, atomic_read(&crc
->stop
));
1344 atomic_set(&crc
->stop
, 0);
1346 do_gettimeofday(&stop
);
1348 printk(KERN_INFO
"PM: Image loading done.\n");
1349 snapshot_write_finalize(snapshot
);
1350 if (!snapshot_image_loaded(snapshot
))
1353 if (swsusp_header
->flags
& SF_CRC32_MODE
) {
1354 if(handle
->crc32
!= swsusp_header
->crc32
) {
1356 "PM: Invalid image CRC32!\n");
1362 swsusp_show_speed(&start
, &stop
, nr_to_read
, "Read");
1364 for (i
= 0; i
< ring_size
; i
++)
1365 free_page((unsigned long)page
[i
]);
1368 kthread_stop(crc
->thr
);
1372 for (thr
= 0; thr
< nr_threads
; thr
++)
1374 kthread_stop(data
[thr
].thr
);
1377 if (page
) vfree(page
);
1383 * swsusp_read - read the hibernation image.
1384 * @flags_p: flags passed by the "frozen" kernel in the image header should
1385 * be written into this memory location
1388 int swsusp_read(unsigned int *flags_p
)
1391 struct swap_map_handle handle
;
1392 struct snapshot_handle snapshot
;
1393 struct swsusp_info
*header
;
1395 memset(&snapshot
, 0, sizeof(struct snapshot_handle
));
1396 error
= snapshot_write_next(&snapshot
);
1397 if (error
< PAGE_SIZE
)
1398 return error
< 0 ? error
: -EFAULT
;
1399 header
= (struct swsusp_info
*)data_of(snapshot
);
1400 error
= get_swap_reader(&handle
, flags_p
);
1404 error
= swap_read_page(&handle
, header
, NULL
);
1406 error
= (*flags_p
& SF_NOCOMPRESS_MODE
) ?
1407 load_image(&handle
, &snapshot
, header
->pages
- 1) :
1408 load_image_lzo(&handle
, &snapshot
, header
->pages
- 1);
1410 swap_reader_finish(&handle
);
1413 pr_debug("PM: Image successfully loaded\n");
1415 pr_debug("PM: Error %d resuming\n", error
);
1420 * swsusp_check - Check for swsusp signature in the resume device
1423 int swsusp_check(void)
1427 hib_resume_bdev
= blkdev_get_by_dev(swsusp_resume_device
,
1429 if (!IS_ERR(hib_resume_bdev
)) {
1430 set_blocksize(hib_resume_bdev
, PAGE_SIZE
);
1431 clear_page(swsusp_header
);
1432 error
= hib_bio_read_page(swsusp_resume_block
,
1433 swsusp_header
, NULL
);
1437 if (!memcmp(HIBERNATE_SIG
, swsusp_header
->sig
, 10)) {
1438 memcpy(swsusp_header
->sig
, swsusp_header
->orig_sig
, 10);
1439 /* Reset swap signature now */
1440 error
= hib_bio_write_page(swsusp_resume_block
,
1441 swsusp_header
, NULL
);
1448 blkdev_put(hib_resume_bdev
, FMODE_READ
);
1450 pr_debug("PM: Image signature found, resuming\n");
1452 error
= PTR_ERR(hib_resume_bdev
);
1456 pr_debug("PM: Image not found (code %d)\n", error
);
1462 * swsusp_close - close swap device.
1465 void swsusp_close(fmode_t mode
)
1467 if (IS_ERR(hib_resume_bdev
)) {
1468 pr_debug("PM: Image device not initialised\n");
1472 blkdev_put(hib_resume_bdev
, mode
);
1476 * swsusp_unmark - Unmark swsusp signature in the resume device
1479 #ifdef CONFIG_SUSPEND
1480 int swsusp_unmark(void)
1484 hib_bio_read_page(swsusp_resume_block
, swsusp_header
, NULL
);
1485 if (!memcmp(HIBERNATE_SIG
,swsusp_header
->sig
, 10)) {
1486 memcpy(swsusp_header
->sig
,swsusp_header
->orig_sig
, 10);
1487 error
= hib_bio_write_page(swsusp_resume_block
,
1488 swsusp_header
, NULL
);
1490 printk(KERN_ERR
"PM: Cannot find swsusp signature!\n");
1495 * We just returned from suspend, we don't need the image any more.
1497 free_all_swap_pages(root_swap
);
1503 static int swsusp_header_init(void)
1505 swsusp_header
= (struct swsusp_header
*) __get_free_page(GFP_KERNEL
);
1507 panic("Could not allocate memory for swsusp_header\n");
1511 core_initcall(swsusp_header_init
);