1 /******************************************************************************
3 * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/delay.h>
36 #include <linux/skbuff.h>
37 #include <linux/netdevice.h>
38 #include <linux/wireless.h>
39 #include <linux/firmware.h>
40 #include <linux/etherdevice.h>
41 #include <linux/if_arp.h>
43 #include <net/ieee80211_radiotap.h>
44 #include <net/mac80211.h>
46 #include <asm/div64.h>
48 #define DRV_NAME "iwl3945"
51 #include "iwl-3945-fh.h"
52 #include "iwl-commands.h"
55 #include "iwl-helpers.h"
60 * module name, copyright, version, etc.
63 #define DRV_DESCRIPTION \
64 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
66 #ifdef CONFIG_IWLWIFI_DEBUG
72 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
78 #define IWL39_VERSION "1.2.26k" VD VS
79 #define DRV_COPYRIGHT "Copyright(c) 2003-2009 Intel Corporation"
80 #define DRV_AUTHOR "<ilw@linux.intel.com>"
81 #define DRV_VERSION IWL39_VERSION
84 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
85 MODULE_VERSION(DRV_VERSION
);
86 MODULE_AUTHOR(DRV_COPYRIGHT
" " DRV_AUTHOR
);
87 MODULE_LICENSE("GPL");
89 /* module parameters */
90 struct iwl_mod_params iwl3945_mod_params
= {
93 /* the rest are 0 by default */
97 * iwl3945_get_antenna_flags - Get antenna flags for RXON command
98 * @priv: eeprom and antenna fields are used to determine antenna flags
100 * priv->eeprom39 is used to determine if antenna AUX/MAIN are reversed
101 * iwl3945_mod_params.antenna specifies the antenna diversity mode:
103 * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
104 * IWL_ANTENNA_MAIN - Force MAIN antenna
105 * IWL_ANTENNA_AUX - Force AUX antenna
107 __le32
iwl3945_get_antenna_flags(const struct iwl_priv
*priv
)
109 struct iwl3945_eeprom
*eeprom
= (struct iwl3945_eeprom
*)priv
->eeprom
;
111 switch (iwl3945_mod_params
.antenna
) {
112 case IWL_ANTENNA_DIVERSITY
:
115 case IWL_ANTENNA_MAIN
:
116 if (eeprom
->antenna_switch_type
)
117 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_B_MSK
;
118 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_A_MSK
;
120 case IWL_ANTENNA_AUX
:
121 if (eeprom
->antenna_switch_type
)
122 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_A_MSK
;
123 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_B_MSK
;
126 /* bad antenna selector value */
127 IWL_ERR(priv
, "Bad antenna selector value (0x%x)\n",
128 iwl3945_mod_params
.antenna
);
130 return 0; /* "diversity" is default if error */
133 static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv
*priv
,
134 struct ieee80211_key_conf
*keyconf
,
138 __le16 key_flags
= 0;
141 key_flags
|= (STA_KEY_FLG_CCMP
| STA_KEY_FLG_MAP_KEY_MSK
);
142 key_flags
|= cpu_to_le16(keyconf
->keyidx
<< STA_KEY_FLG_KEYID_POS
);
144 if (sta_id
== priv
->hw_params
.bcast_sta_id
)
145 key_flags
|= STA_KEY_MULTICAST_MSK
;
147 keyconf
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
148 keyconf
->hw_key_idx
= keyconf
->keyidx
;
149 key_flags
&= ~STA_KEY_FLG_INVALID
;
151 spin_lock_irqsave(&priv
->sta_lock
, flags
);
152 priv
->stations
[sta_id
].keyinfo
.alg
= keyconf
->alg
;
153 priv
->stations
[sta_id
].keyinfo
.keylen
= keyconf
->keylen
;
154 memcpy(priv
->stations
[sta_id
].keyinfo
.key
, keyconf
->key
,
157 memcpy(priv
->stations
[sta_id
].sta
.key
.key
, keyconf
->key
,
160 if ((priv
->stations
[sta_id
].sta
.key
.key_flags
& STA_KEY_FLG_ENCRYPT_MSK
)
161 == STA_KEY_FLG_NO_ENC
)
162 priv
->stations
[sta_id
].sta
.key
.key_offset
=
163 iwl_get_free_ucode_key_index(priv
);
164 /* else, we are overriding an existing key => no need to allocated room
167 WARN(priv
->stations
[sta_id
].sta
.key
.key_offset
== WEP_INVALID_OFFSET
,
168 "no space for a new key");
170 priv
->stations
[sta_id
].sta
.key
.key_flags
= key_flags
;
171 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
172 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
174 IWL_DEBUG_INFO(priv
, "hwcrypto: modify ucode station key info\n");
176 ret
= iwl_send_add_sta(priv
, &priv
->stations
[sta_id
].sta
, CMD_ASYNC
);
178 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
183 static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv
*priv
,
184 struct ieee80211_key_conf
*keyconf
,
190 static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv
*priv
,
191 struct ieee80211_key_conf
*keyconf
,
197 static int iwl3945_clear_sta_key_info(struct iwl_priv
*priv
, u8 sta_id
)
201 spin_lock_irqsave(&priv
->sta_lock
, flags
);
202 memset(&priv
->stations
[sta_id
].keyinfo
, 0, sizeof(struct iwl_hw_key
));
203 memset(&priv
->stations
[sta_id
].sta
.key
, 0,
204 sizeof(struct iwl4965_keyinfo
));
205 priv
->stations
[sta_id
].sta
.key
.key_flags
= STA_KEY_FLG_NO_ENC
;
206 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
207 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
208 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
210 IWL_DEBUG_INFO(priv
, "hwcrypto: clear ucode station key info\n");
211 iwl_send_add_sta(priv
, &priv
->stations
[sta_id
].sta
, 0);
215 static int iwl3945_set_dynamic_key(struct iwl_priv
*priv
,
216 struct ieee80211_key_conf
*keyconf
, u8 sta_id
)
220 keyconf
->hw_key_idx
= HW_KEY_DYNAMIC
;
222 switch (keyconf
->alg
) {
224 ret
= iwl3945_set_ccmp_dynamic_key_info(priv
, keyconf
, sta_id
);
227 ret
= iwl3945_set_tkip_dynamic_key_info(priv
, keyconf
, sta_id
);
230 ret
= iwl3945_set_wep_dynamic_key_info(priv
, keyconf
, sta_id
);
233 IWL_ERR(priv
, "Unknown alg: %s alg = %d\n", __func__
, keyconf
->alg
);
237 IWL_DEBUG_WEP(priv
, "Set dynamic key: alg= %d len=%d idx=%d sta=%d ret=%d\n",
238 keyconf
->alg
, keyconf
->keylen
, keyconf
->keyidx
,
244 static int iwl3945_remove_static_key(struct iwl_priv
*priv
)
246 int ret
= -EOPNOTSUPP
;
251 static int iwl3945_set_static_key(struct iwl_priv
*priv
,
252 struct ieee80211_key_conf
*key
)
254 if (key
->alg
== ALG_WEP
)
257 IWL_ERR(priv
, "Static key invalid: alg %d\n", key
->alg
);
261 static void iwl3945_clear_free_frames(struct iwl_priv
*priv
)
263 struct list_head
*element
;
265 IWL_DEBUG_INFO(priv
, "%d frames on pre-allocated heap on clear.\n",
268 while (!list_empty(&priv
->free_frames
)) {
269 element
= priv
->free_frames
.next
;
271 kfree(list_entry(element
, struct iwl3945_frame
, list
));
272 priv
->frames_count
--;
275 if (priv
->frames_count
) {
276 IWL_WARN(priv
, "%d frames still in use. Did we lose one?\n",
278 priv
->frames_count
= 0;
282 static struct iwl3945_frame
*iwl3945_get_free_frame(struct iwl_priv
*priv
)
284 struct iwl3945_frame
*frame
;
285 struct list_head
*element
;
286 if (list_empty(&priv
->free_frames
)) {
287 frame
= kzalloc(sizeof(*frame
), GFP_KERNEL
);
289 IWL_ERR(priv
, "Could not allocate frame!\n");
293 priv
->frames_count
++;
297 element
= priv
->free_frames
.next
;
299 return list_entry(element
, struct iwl3945_frame
, list
);
302 static void iwl3945_free_frame(struct iwl_priv
*priv
, struct iwl3945_frame
*frame
)
304 memset(frame
, 0, sizeof(*frame
));
305 list_add(&frame
->list
, &priv
->free_frames
);
308 unsigned int iwl3945_fill_beacon_frame(struct iwl_priv
*priv
,
309 struct ieee80211_hdr
*hdr
,
313 if (!iwl_is_associated(priv
) || !priv
->ibss_beacon
||
314 ((priv
->iw_mode
!= NL80211_IFTYPE_ADHOC
) &&
315 (priv
->iw_mode
!= NL80211_IFTYPE_AP
)))
318 if (priv
->ibss_beacon
->len
> left
)
321 memcpy(hdr
, priv
->ibss_beacon
->data
, priv
->ibss_beacon
->len
);
323 return priv
->ibss_beacon
->len
;
326 static int iwl3945_send_beacon_cmd(struct iwl_priv
*priv
)
328 struct iwl3945_frame
*frame
;
329 unsigned int frame_size
;
333 frame
= iwl3945_get_free_frame(priv
);
336 IWL_ERR(priv
, "Could not obtain free frame buffer for beacon "
341 rate
= iwl_rate_get_lowest_plcp(priv
);
343 frame_size
= iwl3945_hw_get_beacon_cmd(priv
, frame
, rate
);
345 rc
= iwl_send_cmd_pdu(priv
, REPLY_TX_BEACON
, frame_size
,
348 iwl3945_free_frame(priv
, frame
);
353 static void iwl3945_unset_hw_params(struct iwl_priv
*priv
)
355 if (priv
->shared_virt
)
356 pci_free_consistent(priv
->pci_dev
,
357 sizeof(struct iwl3945_shared
),
362 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv
*priv
,
363 struct ieee80211_tx_info
*info
,
364 struct iwl_device_cmd
*cmd
,
365 struct sk_buff
*skb_frag
,
368 struct iwl3945_tx_cmd
*tx_cmd
= (struct iwl3945_tx_cmd
*)cmd
->cmd
.payload
;
369 struct iwl_hw_key
*keyinfo
= &priv
->stations
[sta_id
].keyinfo
;
371 switch (keyinfo
->alg
) {
373 tx_cmd
->sec_ctl
= TX_CMD_SEC_CCM
;
374 memcpy(tx_cmd
->key
, keyinfo
->key
, keyinfo
->keylen
);
375 IWL_DEBUG_TX(priv
, "tx_cmd with AES hwcrypto\n");
382 tx_cmd
->sec_ctl
= TX_CMD_SEC_WEP
|
383 (info
->control
.hw_key
->hw_key_idx
& TX_CMD_SEC_MSK
) << TX_CMD_SEC_SHIFT
;
385 if (keyinfo
->keylen
== 13)
386 tx_cmd
->sec_ctl
|= TX_CMD_SEC_KEY128
;
388 memcpy(&tx_cmd
->key
[3], keyinfo
->key
, keyinfo
->keylen
);
390 IWL_DEBUG_TX(priv
, "Configuring packet for WEP encryption "
391 "with key %d\n", info
->control
.hw_key
->hw_key_idx
);
395 IWL_ERR(priv
, "Unknown encode alg %d\n", keyinfo
->alg
);
401 * handle build REPLY_TX command notification.
403 static void iwl3945_build_tx_cmd_basic(struct iwl_priv
*priv
,
404 struct iwl_device_cmd
*cmd
,
405 struct ieee80211_tx_info
*info
,
406 struct ieee80211_hdr
*hdr
, u8 std_id
)
408 struct iwl3945_tx_cmd
*tx_cmd
= (struct iwl3945_tx_cmd
*)cmd
->cmd
.payload
;
409 __le32 tx_flags
= tx_cmd
->tx_flags
;
410 __le16 fc
= hdr
->frame_control
;
412 tx_cmd
->stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
413 if (!(info
->flags
& IEEE80211_TX_CTL_NO_ACK
)) {
414 tx_flags
|= TX_CMD_FLG_ACK_MSK
;
415 if (ieee80211_is_mgmt(fc
))
416 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
417 if (ieee80211_is_probe_resp(fc
) &&
418 !(le16_to_cpu(hdr
->seq_ctrl
) & 0xf))
419 tx_flags
|= TX_CMD_FLG_TSF_MSK
;
421 tx_flags
&= (~TX_CMD_FLG_ACK_MSK
);
422 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
425 tx_cmd
->sta_id
= std_id
;
426 if (ieee80211_has_morefrags(fc
))
427 tx_flags
|= TX_CMD_FLG_MORE_FRAG_MSK
;
429 if (ieee80211_is_data_qos(fc
)) {
430 u8
*qc
= ieee80211_get_qos_ctl(hdr
);
431 tx_cmd
->tid_tspec
= qc
[0] & 0xf;
432 tx_flags
&= ~TX_CMD_FLG_SEQ_CTL_MSK
;
434 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
437 priv
->cfg
->ops
->utils
->rts_tx_cmd_flag(info
, &tx_flags
);
439 if ((tx_flags
& TX_CMD_FLG_RTS_MSK
) || (tx_flags
& TX_CMD_FLG_CTS_MSK
))
440 tx_flags
|= TX_CMD_FLG_FULL_TXOP_PROT_MSK
;
442 tx_flags
&= ~(TX_CMD_FLG_ANT_SEL_MSK
);
443 if (ieee80211_is_mgmt(fc
)) {
444 if (ieee80211_is_assoc_req(fc
) || ieee80211_is_reassoc_req(fc
))
445 tx_cmd
->timeout
.pm_frame_timeout
= cpu_to_le16(3);
447 tx_cmd
->timeout
.pm_frame_timeout
= cpu_to_le16(2);
449 tx_cmd
->timeout
.pm_frame_timeout
= 0;
452 tx_cmd
->driver_txop
= 0;
453 tx_cmd
->tx_flags
= tx_flags
;
454 tx_cmd
->next_frame_len
= 0;
458 * start REPLY_TX command process
460 static int iwl3945_tx_skb(struct iwl_priv
*priv
, struct sk_buff
*skb
)
462 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
463 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
464 struct iwl3945_tx_cmd
*tx_cmd
;
465 struct iwl_tx_queue
*txq
= NULL
;
466 struct iwl_queue
*q
= NULL
;
467 struct iwl_device_cmd
*out_cmd
;
468 struct iwl_cmd_meta
*out_meta
;
469 dma_addr_t phys_addr
;
470 dma_addr_t txcmd_phys
;
471 int txq_id
= skb_get_queue_mapping(skb
);
472 u16 len
, idx
, len_org
, hdr_len
; /* TODO: len_org is not used */
479 u8 wait_write_ptr
= 0;
484 spin_lock_irqsave(&priv
->lock
, flags
);
485 if (iwl_is_rfkill(priv
)) {
486 IWL_DEBUG_DROP(priv
, "Dropping - RF KILL\n");
490 if ((ieee80211_get_tx_rate(priv
->hw
, info
)->hw_value
& 0xFF) == IWL_INVALID_RATE
) {
491 IWL_ERR(priv
, "ERROR: No TX rate available.\n");
495 unicast
= !is_multicast_ether_addr(hdr
->addr1
);
498 fc
= hdr
->frame_control
;
500 #ifdef CONFIG_IWLWIFI_DEBUG
501 if (ieee80211_is_auth(fc
))
502 IWL_DEBUG_TX(priv
, "Sending AUTH frame\n");
503 else if (ieee80211_is_assoc_req(fc
))
504 IWL_DEBUG_TX(priv
, "Sending ASSOC frame\n");
505 else if (ieee80211_is_reassoc_req(fc
))
506 IWL_DEBUG_TX(priv
, "Sending REASSOC frame\n");
509 /* drop all non-injected data frame if we are not associated */
510 if (ieee80211_is_data(fc
) &&
511 !(info
->flags
& IEEE80211_TX_CTL_INJECTED
) &&
512 (!iwl_is_associated(priv
) ||
513 ((priv
->iw_mode
== NL80211_IFTYPE_STATION
) && !priv
->assoc_id
))) {
514 IWL_DEBUG_DROP(priv
, "Dropping - !iwl_is_associated\n");
518 spin_unlock_irqrestore(&priv
->lock
, flags
);
520 hdr_len
= ieee80211_hdrlen(fc
);
522 /* Find (or create) index into station table for destination station */
523 if (info
->flags
& IEEE80211_TX_CTL_INJECTED
)
524 sta_id
= priv
->hw_params
.bcast_sta_id
;
526 sta_id
= iwl_get_sta_id(priv
, hdr
);
527 if (sta_id
== IWL_INVALID_STATION
) {
528 IWL_DEBUG_DROP(priv
, "Dropping - INVALID STATION: %pM\n",
533 IWL_DEBUG_RATE(priv
, "station Id %d\n", sta_id
);
535 if (ieee80211_is_data_qos(fc
)) {
536 qc
= ieee80211_get_qos_ctl(hdr
);
537 tid
= qc
[0] & IEEE80211_QOS_CTL_TID_MASK
;
538 if (unlikely(tid
>= MAX_TID_COUNT
))
540 seq_number
= priv
->stations
[sta_id
].tid
[tid
].seq_number
&
542 hdr
->seq_ctrl
= cpu_to_le16(seq_number
) |
544 cpu_to_le16(IEEE80211_SCTL_FRAG
));
548 /* Descriptor for chosen Tx queue */
549 txq
= &priv
->txq
[txq_id
];
552 spin_lock_irqsave(&priv
->lock
, flags
);
554 idx
= get_cmd_index(q
, q
->write_ptr
, 0);
556 /* Set up driver data for this TFD */
557 memset(&(txq
->txb
[q
->write_ptr
]), 0, sizeof(struct iwl_tx_info
));
558 txq
->txb
[q
->write_ptr
].skb
[0] = skb
;
560 /* Init first empty entry in queue's array of Tx/cmd buffers */
561 out_cmd
= txq
->cmd
[idx
];
562 out_meta
= &txq
->meta
[idx
];
563 tx_cmd
= (struct iwl3945_tx_cmd
*)out_cmd
->cmd
.payload
;
564 memset(&out_cmd
->hdr
, 0, sizeof(out_cmd
->hdr
));
565 memset(tx_cmd
, 0, sizeof(*tx_cmd
));
568 * Set up the Tx-command (not MAC!) header.
569 * Store the chosen Tx queue and TFD index within the sequence field;
570 * after Tx, uCode's Tx response will return this value so driver can
571 * locate the frame within the tx queue and do post-tx processing.
573 out_cmd
->hdr
.cmd
= REPLY_TX
;
574 out_cmd
->hdr
.sequence
= cpu_to_le16((u16
)(QUEUE_TO_SEQ(txq_id
) |
575 INDEX_TO_SEQ(q
->write_ptr
)));
577 /* Copy MAC header from skb into command buffer */
578 memcpy(tx_cmd
->hdr
, hdr
, hdr_len
);
581 if (info
->control
.hw_key
)
582 iwl3945_build_tx_cmd_hwcrypto(priv
, info
, out_cmd
, skb
, sta_id
);
584 /* TODO need this for burst mode later on */
585 iwl3945_build_tx_cmd_basic(priv
, out_cmd
, info
, hdr
, sta_id
);
587 /* set is_hcca to 0; it probably will never be implemented */
588 iwl3945_hw_build_tx_cmd_rate(priv
, out_cmd
, info
, hdr
, sta_id
, 0);
590 /* Total # bytes to be transmitted */
592 tx_cmd
->len
= cpu_to_le16(len
);
594 iwl_dbg_log_tx_data_frame(priv
, len
, hdr
);
595 iwl_update_stats(priv
, true, fc
, len
);
596 tx_cmd
->tx_flags
&= ~TX_CMD_FLG_ANT_A_MSK
;
597 tx_cmd
->tx_flags
&= ~TX_CMD_FLG_ANT_B_MSK
;
599 if (!ieee80211_has_morefrags(hdr
->frame_control
)) {
600 txq
->need_update
= 1;
602 priv
->stations
[sta_id
].tid
[tid
].seq_number
= seq_number
;
605 txq
->need_update
= 0;
608 IWL_DEBUG_TX(priv
, "sequence nr = 0X%x \n",
609 le16_to_cpu(out_cmd
->hdr
.sequence
));
610 IWL_DEBUG_TX(priv
, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd
->tx_flags
));
611 iwl_print_hex_dump(priv
, IWL_DL_TX
, tx_cmd
, sizeof(*tx_cmd
));
612 iwl_print_hex_dump(priv
, IWL_DL_TX
, (u8
*)tx_cmd
->hdr
,
613 ieee80211_hdrlen(fc
));
616 * Use the first empty entry in this queue's command buffer array
617 * to contain the Tx command and MAC header concatenated together
618 * (payload data will be in another buffer).
619 * Size of this varies, due to varying MAC header length.
620 * If end is not dword aligned, we'll have 2 extra bytes at the end
621 * of the MAC header (device reads on dword boundaries).
622 * We'll tell device about this padding later.
624 len
= sizeof(struct iwl3945_tx_cmd
) +
625 sizeof(struct iwl_cmd_header
) + hdr_len
;
628 len
= (len
+ 3) & ~3;
635 /* Physical address of this Tx command's header (not MAC header!),
636 * within command buffer array. */
637 txcmd_phys
= pci_map_single(priv
->pci_dev
, &out_cmd
->hdr
,
638 len
, PCI_DMA_TODEVICE
);
639 /* we do not map meta data ... so we can safely access address to
640 * provide to unmap command*/
641 pci_unmap_addr_set(out_meta
, mapping
, txcmd_phys
);
642 pci_unmap_len_set(out_meta
, len
, len
);
644 /* Add buffer containing Tx command and MAC(!) header to TFD's
646 priv
->cfg
->ops
->lib
->txq_attach_buf_to_tfd(priv
, txq
,
647 txcmd_phys
, len
, 1, 0);
650 /* Set up TFD's 2nd entry to point directly to remainder of skb,
651 * if any (802.11 null frames have no payload). */
652 len
= skb
->len
- hdr_len
;
654 phys_addr
= pci_map_single(priv
->pci_dev
, skb
->data
+ hdr_len
,
655 len
, PCI_DMA_TODEVICE
);
656 priv
->cfg
->ops
->lib
->txq_attach_buf_to_tfd(priv
, txq
,
662 /* Tell device the write index *just past* this latest filled TFD */
663 q
->write_ptr
= iwl_queue_inc_wrap(q
->write_ptr
, q
->n_bd
);
664 rc
= iwl_txq_update_write_ptr(priv
, txq
);
665 spin_unlock_irqrestore(&priv
->lock
, flags
);
670 if ((iwl_queue_space(q
) < q
->high_mark
)
671 && priv
->mac80211_registered
) {
672 if (wait_write_ptr
) {
673 spin_lock_irqsave(&priv
->lock
, flags
);
674 txq
->need_update
= 1;
675 iwl_txq_update_write_ptr(priv
, txq
);
676 spin_unlock_irqrestore(&priv
->lock
, flags
);
679 iwl_stop_queue(priv
, skb_get_queue_mapping(skb
));
685 spin_unlock_irqrestore(&priv
->lock
, flags
);
690 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
692 #include "iwl-spectrum.h"
694 #define BEACON_TIME_MASK_LOW 0x00FFFFFF
695 #define BEACON_TIME_MASK_HIGH 0xFF000000
696 #define TIME_UNIT 1024
699 * extended beacon time format
700 * time in usec will be changed into a 32-bit value in 8:24 format
701 * the high 1 byte is the beacon counts
702 * the lower 3 bytes is the time in usec within one beacon interval
705 static u32
iwl3945_usecs_to_beacons(u32 usec
, u32 beacon_interval
)
709 u32 interval
= beacon_interval
* 1024;
711 if (!interval
|| !usec
)
714 quot
= (usec
/ interval
) & (BEACON_TIME_MASK_HIGH
>> 24);
715 rem
= (usec
% interval
) & BEACON_TIME_MASK_LOW
;
717 return (quot
<< 24) + rem
;
720 /* base is usually what we get from ucode with each received frame,
721 * the same as HW timer counter counting down
724 static __le32
iwl3945_add_beacon_time(u32 base
, u32 addon
, u32 beacon_interval
)
726 u32 base_low
= base
& BEACON_TIME_MASK_LOW
;
727 u32 addon_low
= addon
& BEACON_TIME_MASK_LOW
;
728 u32 interval
= beacon_interval
* TIME_UNIT
;
729 u32 res
= (base
& BEACON_TIME_MASK_HIGH
) +
730 (addon
& BEACON_TIME_MASK_HIGH
);
732 if (base_low
> addon_low
)
733 res
+= base_low
- addon_low
;
734 else if (base_low
< addon_low
) {
735 res
+= interval
+ base_low
- addon_low
;
740 return cpu_to_le32(res
);
743 static int iwl3945_get_measurement(struct iwl_priv
*priv
,
744 struct ieee80211_measurement_params
*params
,
747 struct iwl_spectrum_cmd spectrum
;
748 struct iwl_rx_packet
*pkt
;
749 struct iwl_host_cmd cmd
= {
750 .id
= REPLY_SPECTRUM_MEASUREMENT_CMD
,
751 .data
= (void *)&spectrum
,
752 .flags
= CMD_WANT_SKB
,
754 u32 add_time
= le64_to_cpu(params
->start_time
);
756 int spectrum_resp_status
;
757 int duration
= le16_to_cpu(params
->duration
);
759 if (iwl_is_associated(priv
))
761 iwl3945_usecs_to_beacons(
762 le64_to_cpu(params
->start_time
) - priv
->last_tsf
,
763 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
765 memset(&spectrum
, 0, sizeof(spectrum
));
767 spectrum
.channel_count
= cpu_to_le16(1);
769 RXON_FLG_TSF2HOST_MSK
| RXON_FLG_ANT_A_MSK
| RXON_FLG_DIS_DIV_MSK
;
770 spectrum
.filter_flags
= MEASUREMENT_FILTER_FLAG
;
771 cmd
.len
= sizeof(spectrum
);
772 spectrum
.len
= cpu_to_le16(cmd
.len
- sizeof(spectrum
.len
));
774 if (iwl_is_associated(priv
))
775 spectrum
.start_time
=
776 iwl3945_add_beacon_time(priv
->last_beacon_time
,
778 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
780 spectrum
.start_time
= 0;
782 spectrum
.channels
[0].duration
= cpu_to_le32(duration
* TIME_UNIT
);
783 spectrum
.channels
[0].channel
= params
->channel
;
784 spectrum
.channels
[0].type
= type
;
785 if (priv
->active_rxon
.flags
& RXON_FLG_BAND_24G_MSK
)
786 spectrum
.flags
|= RXON_FLG_BAND_24G_MSK
|
787 RXON_FLG_AUTO_DETECT_MSK
| RXON_FLG_TGG_PROTECT_MSK
;
789 rc
= iwl_send_cmd_sync(priv
, &cmd
);
793 pkt
= (struct iwl_rx_packet
*)cmd
.reply_page
;
794 if (pkt
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
795 IWL_ERR(priv
, "Bad return from REPLY_RX_ON_ASSOC command\n");
799 spectrum_resp_status
= le16_to_cpu(pkt
->u
.spectrum
.status
);
800 switch (spectrum_resp_status
) {
801 case 0: /* Command will be handled */
802 if (pkt
->u
.spectrum
.id
!= 0xff) {
803 IWL_DEBUG_INFO(priv
, "Replaced existing measurement: %d\n",
805 priv
->measurement_status
&= ~MEASUREMENT_READY
;
807 priv
->measurement_status
|= MEASUREMENT_ACTIVE
;
811 case 1: /* Command will not be handled */
816 free_pages(cmd
.reply_page
, priv
->hw_params
.rx_page_order
);
822 static void iwl3945_rx_reply_alive(struct iwl_priv
*priv
,
823 struct iwl_rx_mem_buffer
*rxb
)
825 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
826 struct iwl_alive_resp
*palive
;
827 struct delayed_work
*pwork
;
829 palive
= &pkt
->u
.alive_frame
;
831 IWL_DEBUG_INFO(priv
, "Alive ucode status 0x%08X revision "
833 palive
->is_valid
, palive
->ver_type
,
834 palive
->ver_subtype
);
836 if (palive
->ver_subtype
== INITIALIZE_SUBTYPE
) {
837 IWL_DEBUG_INFO(priv
, "Initialization Alive received.\n");
838 memcpy(&priv
->card_alive_init
, &pkt
->u
.alive_frame
,
839 sizeof(struct iwl_alive_resp
));
840 pwork
= &priv
->init_alive_start
;
842 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
843 memcpy(&priv
->card_alive
, &pkt
->u
.alive_frame
,
844 sizeof(struct iwl_alive_resp
));
845 pwork
= &priv
->alive_start
;
846 iwl3945_disable_events(priv
);
849 /* We delay the ALIVE response by 5ms to
850 * give the HW RF Kill time to activate... */
851 if (palive
->is_valid
== UCODE_VALID_OK
)
852 queue_delayed_work(priv
->workqueue
, pwork
,
853 msecs_to_jiffies(5));
855 IWL_WARN(priv
, "uCode did not respond OK.\n");
858 static void iwl3945_rx_reply_add_sta(struct iwl_priv
*priv
,
859 struct iwl_rx_mem_buffer
*rxb
)
861 #ifdef CONFIG_IWLWIFI_DEBUG
862 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
865 IWL_DEBUG_RX(priv
, "Received REPLY_ADD_STA: 0x%02X\n", pkt
->u
.status
);
869 static void iwl3945_bg_beacon_update(struct work_struct
*work
)
871 struct iwl_priv
*priv
=
872 container_of(work
, struct iwl_priv
, beacon_update
);
873 struct sk_buff
*beacon
;
875 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
876 beacon
= ieee80211_beacon_get(priv
->hw
, priv
->vif
);
879 IWL_ERR(priv
, "update beacon failed\n");
883 mutex_lock(&priv
->mutex
);
884 /* new beacon skb is allocated every time; dispose previous.*/
885 if (priv
->ibss_beacon
)
886 dev_kfree_skb(priv
->ibss_beacon
);
888 priv
->ibss_beacon
= beacon
;
889 mutex_unlock(&priv
->mutex
);
891 iwl3945_send_beacon_cmd(priv
);
894 static void iwl3945_rx_beacon_notif(struct iwl_priv
*priv
,
895 struct iwl_rx_mem_buffer
*rxb
)
897 #ifdef CONFIG_IWLWIFI_DEBUG
898 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
899 struct iwl3945_beacon_notif
*beacon
= &(pkt
->u
.beacon_status
);
900 u8 rate
= beacon
->beacon_notify_hdr
.rate
;
902 IWL_DEBUG_RX(priv
, "beacon status %x retries %d iss %d "
903 "tsf %d %d rate %d\n",
904 le32_to_cpu(beacon
->beacon_notify_hdr
.status
) & TX_STATUS_MSK
,
905 beacon
->beacon_notify_hdr
.failure_frame
,
906 le32_to_cpu(beacon
->ibss_mgr_status
),
907 le32_to_cpu(beacon
->high_tsf
),
908 le32_to_cpu(beacon
->low_tsf
), rate
);
911 if ((priv
->iw_mode
== NL80211_IFTYPE_AP
) &&
912 (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
)))
913 queue_work(priv
->workqueue
, &priv
->beacon_update
);
916 /* Handle notification from uCode that card's power state is changing
917 * due to software, hardware, or critical temperature RFKILL */
918 static void iwl3945_rx_card_state_notif(struct iwl_priv
*priv
,
919 struct iwl_rx_mem_buffer
*rxb
)
921 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
922 u32 flags
= le32_to_cpu(pkt
->u
.card_state_notif
.flags
);
923 unsigned long status
= priv
->status
;
925 IWL_WARN(priv
, "Card state received: HW:%s SW:%s\n",
926 (flags
& HW_CARD_DISABLED
) ? "Kill" : "On",
927 (flags
& SW_CARD_DISABLED
) ? "Kill" : "On");
929 iwl_write32(priv
, CSR_UCODE_DRV_GP1_SET
,
930 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
932 if (flags
& HW_CARD_DISABLED
)
933 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
935 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
938 iwl_scan_cancel(priv
);
940 if ((test_bit(STATUS_RF_KILL_HW
, &status
) !=
941 test_bit(STATUS_RF_KILL_HW
, &priv
->status
)))
942 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
,
943 test_bit(STATUS_RF_KILL_HW
, &priv
->status
));
945 wake_up_interruptible(&priv
->wait_command_queue
);
949 * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
951 * Setup the RX handlers for each of the reply types sent from the uCode
954 * This function chains into the hardware specific files for them to setup
955 * any hardware specific handlers as well.
957 static void iwl3945_setup_rx_handlers(struct iwl_priv
*priv
)
959 priv
->rx_handlers
[REPLY_ALIVE
] = iwl3945_rx_reply_alive
;
960 priv
->rx_handlers
[REPLY_ADD_STA
] = iwl3945_rx_reply_add_sta
;
961 priv
->rx_handlers
[REPLY_ERROR
] = iwl_rx_reply_error
;
962 priv
->rx_handlers
[CHANNEL_SWITCH_NOTIFICATION
] = iwl_rx_csa
;
963 priv
->rx_handlers
[PM_SLEEP_NOTIFICATION
] = iwl_rx_pm_sleep_notif
;
964 priv
->rx_handlers
[PM_DEBUG_STATISTIC_NOTIFIC
] =
965 iwl_rx_pm_debug_statistics_notif
;
966 priv
->rx_handlers
[BEACON_NOTIFICATION
] = iwl3945_rx_beacon_notif
;
969 * The same handler is used for both the REPLY to a discrete
970 * statistics request from the host as well as for the periodic
971 * statistics notifications (after received beacons) from the uCode.
973 priv
->rx_handlers
[REPLY_STATISTICS_CMD
] = iwl3945_hw_rx_statistics
;
974 priv
->rx_handlers
[STATISTICS_NOTIFICATION
] = iwl3945_hw_rx_statistics
;
976 iwl_setup_spectrum_handlers(priv
);
977 iwl_setup_rx_scan_handlers(priv
);
978 priv
->rx_handlers
[CARD_STATE_NOTIFICATION
] = iwl3945_rx_card_state_notif
;
980 /* Set up hardware specific Rx handlers */
981 iwl3945_hw_rx_handler_setup(priv
);
984 /************************** RX-FUNCTIONS ****************************/
986 * Rx theory of operation
988 * The host allocates 32 DMA target addresses and passes the host address
989 * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
993 * The host/firmware share two index registers for managing the Rx buffers.
995 * The READ index maps to the first position that the firmware may be writing
996 * to -- the driver can read up to (but not including) this position and get
998 * The READ index is managed by the firmware once the card is enabled.
1000 * The WRITE index maps to the last position the driver has read from -- the
1001 * position preceding WRITE is the last slot the firmware can place a packet.
1003 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
1006 * During initialization, the host sets up the READ queue position to the first
1007 * INDEX position, and WRITE to the last (READ - 1 wrapped)
1009 * When the firmware places a packet in a buffer, it will advance the READ index
1010 * and fire the RX interrupt. The driver can then query the READ index and
1011 * process as many packets as possible, moving the WRITE index forward as it
1012 * resets the Rx queue buffers with new memory.
1014 * The management in the driver is as follows:
1015 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
1016 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
1017 * to replenish the iwl->rxq->rx_free.
1018 * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
1019 * iwl->rxq is replenished and the READ INDEX is updated (updating the
1020 * 'processed' and 'read' driver indexes as well)
1021 * + A received packet is processed and handed to the kernel network stack,
1022 * detached from the iwl->rxq. The driver 'processed' index is updated.
1023 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
1024 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
1025 * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
1026 * were enough free buffers and RX_STALLED is set it is cleared.
1031 * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
1032 * iwl3945_rx_queue_restock
1033 * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
1034 * queue, updates firmware pointers, and updates
1035 * the WRITE index. If insufficient rx_free buffers
1036 * are available, schedules iwl3945_rx_replenish
1038 * -- enable interrupts --
1039 * ISR - iwl3945_rx() Detach iwl_rx_mem_buffers from pool up to the
1040 * READ INDEX, detaching the SKB from the pool.
1041 * Moves the packet buffer from queue to rx_used.
1042 * Calls iwl3945_rx_queue_restock to refill any empty
1049 * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
1051 static inline __le32
iwl3945_dma_addr2rbd_ptr(struct iwl_priv
*priv
,
1052 dma_addr_t dma_addr
)
1054 return cpu_to_le32((u32
)dma_addr
);
1058 * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
1060 * If there are slots in the RX queue that need to be restocked,
1061 * and we have free pre-allocated buffers, fill the ranks as much
1062 * as we can, pulling from rx_free.
1064 * This moves the 'write' index forward to catch up with 'processed', and
1065 * also updates the memory address in the firmware to reference the new
1068 static int iwl3945_rx_queue_restock(struct iwl_priv
*priv
)
1070 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
1071 struct list_head
*element
;
1072 struct iwl_rx_mem_buffer
*rxb
;
1073 unsigned long flags
;
1076 spin_lock_irqsave(&rxq
->lock
, flags
);
1077 write
= rxq
->write
& ~0x7;
1078 while ((iwl_rx_queue_space(rxq
) > 0) && (rxq
->free_count
)) {
1079 /* Get next free Rx buffer, remove from free list */
1080 element
= rxq
->rx_free
.next
;
1081 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
1084 /* Point to Rx buffer via next RBD in circular buffer */
1085 rxq
->bd
[rxq
->write
] = iwl3945_dma_addr2rbd_ptr(priv
, rxb
->page_dma
);
1086 rxq
->queue
[rxq
->write
] = rxb
;
1087 rxq
->write
= (rxq
->write
+ 1) & RX_QUEUE_MASK
;
1090 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1091 /* If the pre-allocated buffer pool is dropping low, schedule to
1093 if (rxq
->free_count
<= RX_LOW_WATERMARK
)
1094 queue_work(priv
->workqueue
, &priv
->rx_replenish
);
1097 /* If we've added more space for the firmware to place data, tell it.
1098 * Increment device's write pointer in multiples of 8. */
1099 if ((rxq
->write_actual
!= (rxq
->write
& ~0x7))
1100 || (abs(rxq
->write
- rxq
->read
) > 7)) {
1101 spin_lock_irqsave(&rxq
->lock
, flags
);
1102 rxq
->need_update
= 1;
1103 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1104 rc
= iwl_rx_queue_update_write_ptr(priv
, rxq
);
1113 * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
1115 * When moving to rx_free an SKB is allocated for the slot.
1117 * Also restock the Rx queue via iwl3945_rx_queue_restock.
1118 * This is called as a scheduled work item (except for during initialization)
1120 static void iwl3945_rx_allocate(struct iwl_priv
*priv
, gfp_t priority
)
1122 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
1123 struct list_head
*element
;
1124 struct iwl_rx_mem_buffer
*rxb
;
1126 unsigned long flags
;
1127 gfp_t gfp_mask
= priority
;
1130 spin_lock_irqsave(&rxq
->lock
, flags
);
1132 if (list_empty(&rxq
->rx_used
)) {
1133 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1136 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1138 if (rxq
->free_count
> RX_LOW_WATERMARK
)
1139 gfp_mask
|= __GFP_NOWARN
;
1141 if (priv
->hw_params
.rx_page_order
> 0)
1142 gfp_mask
|= __GFP_COMP
;
1144 /* Alloc a new receive buffer */
1145 page
= alloc_pages(gfp_mask
, priv
->hw_params
.rx_page_order
);
1147 if (net_ratelimit())
1148 IWL_DEBUG_INFO(priv
, "Failed to allocate SKB buffer.\n");
1149 if ((rxq
->free_count
<= RX_LOW_WATERMARK
) &&
1151 IWL_CRIT(priv
, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
1152 priority
== GFP_ATOMIC
? "GFP_ATOMIC" : "GFP_KERNEL",
1154 /* We don't reschedule replenish work here -- we will
1155 * call the restock method and if it still needs
1156 * more buffers it will schedule replenish */
1160 spin_lock_irqsave(&rxq
->lock
, flags
);
1161 if (list_empty(&rxq
->rx_used
)) {
1162 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1163 __free_pages(page
, priv
->hw_params
.rx_page_order
);
1166 element
= rxq
->rx_used
.next
;
1167 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
1169 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1172 /* Get physical address of RB/SKB */
1173 rxb
->page_dma
= pci_map_page(priv
->pci_dev
, page
, 0,
1174 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1175 PCI_DMA_FROMDEVICE
);
1177 spin_lock_irqsave(&rxq
->lock
, flags
);
1179 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
1181 priv
->alloc_rxb_page
++;
1183 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1187 void iwl3945_rx_queue_reset(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
1189 unsigned long flags
;
1191 spin_lock_irqsave(&rxq
->lock
, flags
);
1192 INIT_LIST_HEAD(&rxq
->rx_free
);
1193 INIT_LIST_HEAD(&rxq
->rx_used
);
1194 /* Fill the rx_used queue with _all_ of the Rx buffers */
1195 for (i
= 0; i
< RX_FREE_BUFFERS
+ RX_QUEUE_SIZE
; i
++) {
1196 /* In the reset function, these buffers may have been allocated
1197 * to an SKB, so we need to unmap and free potential storage */
1198 if (rxq
->pool
[i
].page
!= NULL
) {
1199 pci_unmap_page(priv
->pci_dev
, rxq
->pool
[i
].page_dma
,
1200 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1201 PCI_DMA_FROMDEVICE
);
1202 priv
->alloc_rxb_page
--;
1203 __free_pages(rxq
->pool
[i
].page
,
1204 priv
->hw_params
.rx_page_order
);
1205 rxq
->pool
[i
].page
= NULL
;
1207 list_add_tail(&rxq
->pool
[i
].list
, &rxq
->rx_used
);
1210 /* Set us so that we have processed and used all buffers, but have
1211 * not restocked the Rx queue with fresh buffers */
1212 rxq
->read
= rxq
->write
= 0;
1213 rxq
->write_actual
= 0;
1214 rxq
->free_count
= 0;
1215 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1218 void iwl3945_rx_replenish(void *data
)
1220 struct iwl_priv
*priv
= data
;
1221 unsigned long flags
;
1223 iwl3945_rx_allocate(priv
, GFP_KERNEL
);
1225 spin_lock_irqsave(&priv
->lock
, flags
);
1226 iwl3945_rx_queue_restock(priv
);
1227 spin_unlock_irqrestore(&priv
->lock
, flags
);
1230 static void iwl3945_rx_replenish_now(struct iwl_priv
*priv
)
1232 iwl3945_rx_allocate(priv
, GFP_ATOMIC
);
1234 iwl3945_rx_queue_restock(priv
);
1238 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
1239 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
1240 * This free routine walks the list of POOL entries and if SKB is set to
1241 * non NULL it is unmapped and freed
1243 static void iwl3945_rx_queue_free(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
1246 for (i
= 0; i
< RX_QUEUE_SIZE
+ RX_FREE_BUFFERS
; i
++) {
1247 if (rxq
->pool
[i
].page
!= NULL
) {
1248 pci_unmap_page(priv
->pci_dev
, rxq
->pool
[i
].page_dma
,
1249 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1250 PCI_DMA_FROMDEVICE
);
1251 __free_pages(rxq
->pool
[i
].page
,
1252 priv
->hw_params
.rx_page_order
);
1253 rxq
->pool
[i
].page
= NULL
;
1254 priv
->alloc_rxb_page
--;
1258 pci_free_consistent(priv
->pci_dev
, 4 * RX_QUEUE_SIZE
, rxq
->bd
,
1260 pci_free_consistent(priv
->pci_dev
, sizeof(struct iwl_rb_status
),
1261 rxq
->rb_stts
, rxq
->rb_stts_dma
);
1263 rxq
->rb_stts
= NULL
;
1267 /* Convert linear signal-to-noise ratio into dB */
1268 static u8 ratio2dB
[100] = {
1269 /* 0 1 2 3 4 5 6 7 8 9 */
1270 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
1271 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
1272 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
1273 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
1274 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
1275 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
1276 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
1277 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
1278 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
1279 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
1282 /* Calculates a relative dB value from a ratio of linear
1283 * (i.e. not dB) signal levels.
1284 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
1285 int iwl3945_calc_db_from_ratio(int sig_ratio
)
1287 /* 1000:1 or higher just report as 60 dB */
1288 if (sig_ratio
>= 1000)
1291 /* 100:1 or higher, divide by 10 and use table,
1292 * add 20 dB to make up for divide by 10 */
1293 if (sig_ratio
>= 100)
1294 return 20 + (int)ratio2dB
[sig_ratio
/10];
1296 /* We shouldn't see this */
1300 /* Use table for ratios 1:1 - 99:1 */
1301 return (int)ratio2dB
[sig_ratio
];
1304 #define PERFECT_RSSI (-20) /* dBm */
1305 #define WORST_RSSI (-95) /* dBm */
1306 #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
1308 /* Calculate an indication of rx signal quality (a percentage, not dBm!).
1309 * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
1310 * about formulas used below. */
1311 int iwl3945_calc_sig_qual(int rssi_dbm
, int noise_dbm
)
1314 int degradation
= PERFECT_RSSI
- rssi_dbm
;
1316 /* If we get a noise measurement, use signal-to-noise ratio (SNR)
1317 * as indicator; formula is (signal dbm - noise dbm).
1318 * SNR at or above 40 is a great signal (100%).
1319 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
1320 * Weakest usable signal is usually 10 - 15 dB SNR. */
1322 if (rssi_dbm
- noise_dbm
>= 40)
1324 else if (rssi_dbm
< noise_dbm
)
1326 sig_qual
= ((rssi_dbm
- noise_dbm
) * 5) / 2;
1328 /* Else use just the signal level.
1329 * This formula is a least squares fit of data points collected and
1330 * compared with a reference system that had a percentage (%) display
1331 * for signal quality. */
1333 sig_qual
= (100 * (RSSI_RANGE
* RSSI_RANGE
) - degradation
*
1334 (15 * RSSI_RANGE
+ 62 * degradation
)) /
1335 (RSSI_RANGE
* RSSI_RANGE
);
1339 else if (sig_qual
< 1)
1346 * iwl3945_rx_handle - Main entry function for receiving responses from uCode
1348 * Uses the priv->rx_handlers callback function array to invoke
1349 * the appropriate handlers, including command responses,
1350 * frame-received notifications, and other notifications.
1352 static void iwl3945_rx_handle(struct iwl_priv
*priv
)
1354 struct iwl_rx_mem_buffer
*rxb
;
1355 struct iwl_rx_packet
*pkt
;
1356 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
1359 unsigned long flags
;
1362 int total_empty
= 0;
1364 /* uCode's read index (stored in shared DRAM) indicates the last Rx
1365 * buffer that the driver may process (last buffer filled by ucode). */
1366 r
= le16_to_cpu(rxq
->rb_stts
->closed_rb_num
) & 0x0FFF;
1369 /* calculate total frames need to be restock after handling RX */
1370 total_empty
= r
- rxq
->write_actual
;
1371 if (total_empty
< 0)
1372 total_empty
+= RX_QUEUE_SIZE
;
1374 if (total_empty
> (RX_QUEUE_SIZE
/ 2))
1376 /* Rx interrupt, but nothing sent from uCode */
1378 IWL_DEBUG_RX(priv
, "r = %d, i = %d\n", r
, i
);
1381 rxb
= rxq
->queue
[i
];
1383 /* If an RXB doesn't have a Rx queue slot associated with it,
1384 * then a bug has been introduced in the queue refilling
1385 * routines -- catch it here */
1386 BUG_ON(rxb
== NULL
);
1388 rxq
->queue
[i
] = NULL
;
1390 pci_unmap_page(priv
->pci_dev
, rxb
->page_dma
,
1391 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1392 PCI_DMA_FROMDEVICE
);
1393 pkt
= rxb_addr(rxb
);
1395 trace_iwlwifi_dev_rx(priv
, pkt
,
1396 le32_to_cpu(pkt
->len_n_flags
) & FH_RSCSR_FRAME_SIZE_MSK
);
1398 /* Reclaim a command buffer only if this packet is a response
1399 * to a (driver-originated) command.
1400 * If the packet (e.g. Rx frame) originated from uCode,
1401 * there is no command buffer to reclaim.
1402 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
1403 * but apparently a few don't get set; catch them here. */
1404 reclaim
= !(pkt
->hdr
.sequence
& SEQ_RX_FRAME
) &&
1405 (pkt
->hdr
.cmd
!= STATISTICS_NOTIFICATION
) &&
1406 (pkt
->hdr
.cmd
!= REPLY_TX
);
1408 /* Based on type of command response or notification,
1409 * handle those that need handling via function in
1410 * rx_handlers table. See iwl3945_setup_rx_handlers() */
1411 if (priv
->rx_handlers
[pkt
->hdr
.cmd
]) {
1412 IWL_DEBUG_RX(priv
, "r = %d, i = %d, %s, 0x%02x\n", r
, i
,
1413 get_cmd_string(pkt
->hdr
.cmd
), pkt
->hdr
.cmd
);
1414 priv
->isr_stats
.rx_handlers
[pkt
->hdr
.cmd
]++;
1415 priv
->rx_handlers
[pkt
->hdr
.cmd
] (priv
, rxb
);
1417 /* No handling needed */
1419 "r %d i %d No handler needed for %s, 0x%02x\n",
1420 r
, i
, get_cmd_string(pkt
->hdr
.cmd
),
1425 * XXX: After here, we should always check rxb->page
1426 * against NULL before touching it or its virtual
1427 * memory (pkt). Because some rx_handler might have
1428 * already taken or freed the pages.
1432 /* Invoke any callbacks, transfer the buffer to caller,
1433 * and fire off the (possibly) blocking iwl_send_cmd()
1434 * as we reclaim the driver command queue */
1436 iwl_tx_cmd_complete(priv
, rxb
);
1438 IWL_WARN(priv
, "Claim null rxb?\n");
1441 /* Reuse the page if possible. For notification packets and
1442 * SKBs that fail to Rx correctly, add them back into the
1443 * rx_free list for reuse later. */
1444 spin_lock_irqsave(&rxq
->lock
, flags
);
1445 if (rxb
->page
!= NULL
) {
1446 rxb
->page_dma
= pci_map_page(priv
->pci_dev
, rxb
->page
,
1447 0, PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1448 PCI_DMA_FROMDEVICE
);
1449 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
1452 list_add_tail(&rxb
->list
, &rxq
->rx_used
);
1454 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1456 i
= (i
+ 1) & RX_QUEUE_MASK
;
1457 /* If there are a lot of unused frames,
1458 * restock the Rx queue so ucode won't assert. */
1463 iwl3945_rx_replenish_now(priv
);
1469 /* Backtrack one entry */
1472 iwl3945_rx_replenish_now(priv
);
1474 iwl3945_rx_queue_restock(priv
);
1477 /* call this function to flush any scheduled tasklet */
1478 static inline void iwl_synchronize_irq(struct iwl_priv
*priv
)
1480 /* wait to make sure we flush pending tasklet*/
1481 synchronize_irq(priv
->pci_dev
->irq
);
1482 tasklet_kill(&priv
->irq_tasklet
);
1485 #ifdef CONFIG_IWLWIFI_DEBUG
1486 static const char *desc_lookup(int i
)
1494 return "BAD_CHECKSUM";
1496 return "NMI_INTERRUPT";
1500 return "FATAL_ERROR";
1506 #define ERROR_START_OFFSET (1 * sizeof(u32))
1507 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1509 void iwl3945_dump_nic_error_log(struct iwl_priv
*priv
)
1512 u32 desc
, time
, count
, base
, data1
;
1513 u32 blink1
, blink2
, ilink1
, ilink2
;
1515 base
= le32_to_cpu(priv
->card_alive
.error_event_table_ptr
);
1517 if (!iwl3945_hw_valid_rtc_data_addr(base
)) {
1518 IWL_ERR(priv
, "Not valid error log pointer 0x%08X\n", base
);
1523 count
= iwl_read_targ_mem(priv
, base
);
1525 if (ERROR_START_OFFSET
<= count
* ERROR_ELEM_SIZE
) {
1526 IWL_ERR(priv
, "Start IWL Error Log Dump:\n");
1527 IWL_ERR(priv
, "Status: 0x%08lX, count: %d\n",
1528 priv
->status
, count
);
1531 IWL_ERR(priv
, "Desc Time asrtPC blink2 "
1532 "ilink1 nmiPC Line\n");
1533 for (i
= ERROR_START_OFFSET
;
1534 i
< (count
* ERROR_ELEM_SIZE
) + ERROR_START_OFFSET
;
1535 i
+= ERROR_ELEM_SIZE
) {
1536 desc
= iwl_read_targ_mem(priv
, base
+ i
);
1538 iwl_read_targ_mem(priv
, base
+ i
+ 1 * sizeof(u32
));
1540 iwl_read_targ_mem(priv
, base
+ i
+ 2 * sizeof(u32
));
1542 iwl_read_targ_mem(priv
, base
+ i
+ 3 * sizeof(u32
));
1544 iwl_read_targ_mem(priv
, base
+ i
+ 4 * sizeof(u32
));
1546 iwl_read_targ_mem(priv
, base
+ i
+ 5 * sizeof(u32
));
1548 iwl_read_targ_mem(priv
, base
+ i
+ 6 * sizeof(u32
));
1551 "%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
1552 desc_lookup(desc
), desc
, time
, blink1
, blink2
,
1553 ilink1
, ilink2
, data1
);
1554 trace_iwlwifi_dev_ucode_error(priv
, desc
, time
, data1
, 0,
1555 0, blink1
, blink2
, ilink1
, ilink2
);
1559 #define EVENT_START_OFFSET (6 * sizeof(u32))
1562 * iwl3945_print_event_log - Dump error event log to syslog
1565 static void iwl3945_print_event_log(struct iwl_priv
*priv
, u32 start_idx
,
1566 u32 num_events
, u32 mode
)
1569 u32 base
; /* SRAM byte address of event log header */
1570 u32 event_size
; /* 2 u32s, or 3 u32s if timestamp recorded */
1571 u32 ptr
; /* SRAM byte address of log data */
1572 u32 ev
, time
, data
; /* event log data */
1574 if (num_events
== 0)
1577 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
1580 event_size
= 2 * sizeof(u32
);
1582 event_size
= 3 * sizeof(u32
);
1584 ptr
= base
+ EVENT_START_OFFSET
+ (start_idx
* event_size
);
1586 /* "time" is actually "data" for mode 0 (no timestamp).
1587 * place event id # at far right for easier visual parsing. */
1588 for (i
= 0; i
< num_events
; i
++) {
1589 ev
= iwl_read_targ_mem(priv
, ptr
);
1591 time
= iwl_read_targ_mem(priv
, ptr
);
1595 IWL_ERR(priv
, "0x%08x\t%04u\n", time
, ev
);
1596 trace_iwlwifi_dev_ucode_event(priv
, 0, time
, ev
);
1598 data
= iwl_read_targ_mem(priv
, ptr
);
1600 IWL_ERR(priv
, "%010u\t0x%08x\t%04u\n", time
, data
, ev
);
1601 trace_iwlwifi_dev_ucode_event(priv
, time
, data
, ev
);
1606 void iwl3945_dump_nic_event_log(struct iwl_priv
*priv
)
1608 u32 base
; /* SRAM byte address of event log header */
1609 u32 capacity
; /* event log capacity in # entries */
1610 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
1611 u32 num_wraps
; /* # times uCode wrapped to top of log */
1612 u32 next_entry
; /* index of next entry to be written by uCode */
1613 u32 size
; /* # entries that we'll print */
1615 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
1616 if (!iwl3945_hw_valid_rtc_data_addr(base
)) {
1617 IWL_ERR(priv
, "Invalid event log pointer 0x%08X\n", base
);
1621 /* event log header */
1622 capacity
= iwl_read_targ_mem(priv
, base
);
1623 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
1624 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
1625 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
1627 size
= num_wraps
? capacity
: next_entry
;
1629 /* bail out if nothing in log */
1631 IWL_ERR(priv
, "Start IWL Event Log Dump: nothing in log\n");
1635 IWL_ERR(priv
, "Start IWL Event Log Dump: display count %d, wraps %d\n",
1638 /* if uCode has wrapped back to top of log, start at the oldest entry,
1639 * i.e the next one that uCode would fill. */
1641 iwl3945_print_event_log(priv
, next_entry
,
1642 capacity
- next_entry
, mode
);
1644 /* (then/else) start at top of log */
1645 iwl3945_print_event_log(priv
, 0, next_entry
, mode
);
1649 void iwl3945_dump_nic_event_log(struct iwl_priv
*priv
)
1653 void iwl3945_dump_nic_error_log(struct iwl_priv
*priv
)
1659 static void iwl3945_irq_tasklet(struct iwl_priv
*priv
)
1661 u32 inta
, handled
= 0;
1663 unsigned long flags
;
1664 #ifdef CONFIG_IWLWIFI_DEBUG
1668 spin_lock_irqsave(&priv
->lock
, flags
);
1670 /* Ack/clear/reset pending uCode interrupts.
1671 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1672 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
1673 inta
= iwl_read32(priv
, CSR_INT
);
1674 iwl_write32(priv
, CSR_INT
, inta
);
1676 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1677 * Any new interrupts that happen after this, either while we're
1678 * in this tasklet, or later, will show up in next ISR/tasklet. */
1679 inta_fh
= iwl_read32(priv
, CSR_FH_INT_STATUS
);
1680 iwl_write32(priv
, CSR_FH_INT_STATUS
, inta_fh
);
1682 #ifdef CONFIG_IWLWIFI_DEBUG
1683 if (iwl_get_debug_level(priv
) & IWL_DL_ISR
) {
1684 /* just for debug */
1685 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
1686 IWL_DEBUG_ISR(priv
, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
1687 inta
, inta_mask
, inta_fh
);
1691 spin_unlock_irqrestore(&priv
->lock
, flags
);
1693 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1694 * atomic, make sure that inta covers all the interrupts that
1695 * we've discovered, even if FH interrupt came in just after
1696 * reading CSR_INT. */
1697 if (inta_fh
& CSR39_FH_INT_RX_MASK
)
1698 inta
|= CSR_INT_BIT_FH_RX
;
1699 if (inta_fh
& CSR39_FH_INT_TX_MASK
)
1700 inta
|= CSR_INT_BIT_FH_TX
;
1702 /* Now service all interrupt bits discovered above. */
1703 if (inta
& CSR_INT_BIT_HW_ERR
) {
1704 IWL_ERR(priv
, "Hardware error detected. Restarting.\n");
1706 /* Tell the device to stop sending interrupts */
1707 iwl_disable_interrupts(priv
);
1709 priv
->isr_stats
.hw
++;
1710 iwl_irq_handle_error(priv
);
1712 handled
|= CSR_INT_BIT_HW_ERR
;
1717 #ifdef CONFIG_IWLWIFI_DEBUG
1718 if (iwl_get_debug_level(priv
) & (IWL_DL_ISR
)) {
1719 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1720 if (inta
& CSR_INT_BIT_SCD
) {
1721 IWL_DEBUG_ISR(priv
, "Scheduler finished to transmit "
1722 "the frame/frames.\n");
1723 priv
->isr_stats
.sch
++;
1726 /* Alive notification via Rx interrupt will do the real work */
1727 if (inta
& CSR_INT_BIT_ALIVE
) {
1728 IWL_DEBUG_ISR(priv
, "Alive interrupt\n");
1729 priv
->isr_stats
.alive
++;
1733 /* Safely ignore these bits for debug checks below */
1734 inta
&= ~(CSR_INT_BIT_SCD
| CSR_INT_BIT_ALIVE
);
1736 /* Error detected by uCode */
1737 if (inta
& CSR_INT_BIT_SW_ERR
) {
1738 IWL_ERR(priv
, "Microcode SW error detected. "
1739 "Restarting 0x%X.\n", inta
);
1740 priv
->isr_stats
.sw
++;
1741 priv
->isr_stats
.sw_err
= inta
;
1742 iwl_irq_handle_error(priv
);
1743 handled
|= CSR_INT_BIT_SW_ERR
;
1746 /* uCode wakes up after power-down sleep */
1747 if (inta
& CSR_INT_BIT_WAKEUP
) {
1748 IWL_DEBUG_ISR(priv
, "Wakeup interrupt\n");
1749 iwl_rx_queue_update_write_ptr(priv
, &priv
->rxq
);
1750 iwl_txq_update_write_ptr(priv
, &priv
->txq
[0]);
1751 iwl_txq_update_write_ptr(priv
, &priv
->txq
[1]);
1752 iwl_txq_update_write_ptr(priv
, &priv
->txq
[2]);
1753 iwl_txq_update_write_ptr(priv
, &priv
->txq
[3]);
1754 iwl_txq_update_write_ptr(priv
, &priv
->txq
[4]);
1755 iwl_txq_update_write_ptr(priv
, &priv
->txq
[5]);
1757 priv
->isr_stats
.wakeup
++;
1758 handled
|= CSR_INT_BIT_WAKEUP
;
1761 /* All uCode command responses, including Tx command responses,
1762 * Rx "responses" (frame-received notification), and other
1763 * notifications from uCode come through here*/
1764 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
)) {
1765 iwl3945_rx_handle(priv
);
1766 priv
->isr_stats
.rx
++;
1767 handled
|= (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
);
1770 if (inta
& CSR_INT_BIT_FH_TX
) {
1771 IWL_DEBUG_ISR(priv
, "Tx interrupt\n");
1772 priv
->isr_stats
.tx
++;
1774 iwl_write32(priv
, CSR_FH_INT_STATUS
, (1 << 6));
1775 iwl_write_direct32(priv
, FH39_TCSR_CREDIT
1776 (FH39_SRVC_CHNL
), 0x0);
1777 handled
|= CSR_INT_BIT_FH_TX
;
1780 if (inta
& ~handled
) {
1781 IWL_ERR(priv
, "Unhandled INTA bits 0x%08x\n", inta
& ~handled
);
1782 priv
->isr_stats
.unhandled
++;
1785 if (inta
& ~priv
->inta_mask
) {
1786 IWL_WARN(priv
, "Disabled INTA bits 0x%08x were pending\n",
1787 inta
& ~priv
->inta_mask
);
1788 IWL_WARN(priv
, " with FH_INT = 0x%08x\n", inta_fh
);
1791 /* Re-enable all interrupts */
1792 /* only Re-enable if disabled by irq */
1793 if (test_bit(STATUS_INT_ENABLED
, &priv
->status
))
1794 iwl_enable_interrupts(priv
);
1796 #ifdef CONFIG_IWLWIFI_DEBUG
1797 if (iwl_get_debug_level(priv
) & (IWL_DL_ISR
)) {
1798 inta
= iwl_read32(priv
, CSR_INT
);
1799 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
1800 inta_fh
= iwl_read32(priv
, CSR_FH_INT_STATUS
);
1801 IWL_DEBUG_ISR(priv
, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1802 "flags 0x%08lx\n", inta
, inta_mask
, inta_fh
, flags
);
1807 static int iwl3945_get_channels_for_scan(struct iwl_priv
*priv
,
1808 enum ieee80211_band band
,
1809 u8 is_active
, u8 n_probes
,
1810 struct iwl3945_scan_channel
*scan_ch
)
1812 struct ieee80211_channel
*chan
;
1813 const struct ieee80211_supported_band
*sband
;
1814 const struct iwl_channel_info
*ch_info
;
1815 u16 passive_dwell
= 0;
1816 u16 active_dwell
= 0;
1819 sband
= iwl_get_hw_mode(priv
, band
);
1823 active_dwell
= iwl_get_active_dwell_time(priv
, band
, n_probes
);
1824 passive_dwell
= iwl_get_passive_dwell_time(priv
, band
);
1826 if (passive_dwell
<= active_dwell
)
1827 passive_dwell
= active_dwell
+ 1;
1829 for (i
= 0, added
= 0; i
< priv
->scan_request
->n_channels
; i
++) {
1830 chan
= priv
->scan_request
->channels
[i
];
1832 if (chan
->band
!= band
)
1835 scan_ch
->channel
= chan
->hw_value
;
1837 ch_info
= iwl_get_channel_info(priv
, band
, scan_ch
->channel
);
1838 if (!is_channel_valid(ch_info
)) {
1839 IWL_DEBUG_SCAN(priv
, "Channel %d is INVALID for this band.\n",
1844 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
1845 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
1846 /* If passive , set up for auto-switch
1847 * and use long active_dwell time.
1849 if (!is_active
|| is_channel_passive(ch_info
) ||
1850 (chan
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)) {
1851 scan_ch
->type
= 0; /* passive */
1852 if (IWL_UCODE_API(priv
->ucode_ver
) == 1)
1853 scan_ch
->active_dwell
= cpu_to_le16(passive_dwell
- 1);
1855 scan_ch
->type
= 1; /* active */
1858 /* Set direct probe bits. These may be used both for active
1859 * scan channels (probes gets sent right away),
1860 * or for passive channels (probes get se sent only after
1861 * hearing clear Rx packet).*/
1862 if (IWL_UCODE_API(priv
->ucode_ver
) >= 2) {
1864 scan_ch
->type
|= IWL39_SCAN_PROBE_MASK(n_probes
);
1866 /* uCode v1 does not allow setting direct probe bits on
1867 * passive channel. */
1868 if ((scan_ch
->type
& 1) && n_probes
)
1869 scan_ch
->type
|= IWL39_SCAN_PROBE_MASK(n_probes
);
1872 /* Set txpower levels to defaults */
1873 scan_ch
->tpc
.dsp_atten
= 110;
1874 /* scan_pwr_info->tpc.dsp_atten; */
1876 /*scan_pwr_info->tpc.tx_gain; */
1877 if (band
== IEEE80211_BAND_5GHZ
)
1878 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (3 << 3)) | 3;
1880 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (5 << 3));
1881 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1883 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
1887 IWL_DEBUG_SCAN(priv
, "Scanning %d [%s %d]\n",
1889 (scan_ch
->type
& 1) ? "ACTIVE" : "PASSIVE",
1890 (scan_ch
->type
& 1) ?
1891 active_dwell
: passive_dwell
);
1897 IWL_DEBUG_SCAN(priv
, "total channels to scan %d \n", added
);
1901 static void iwl3945_init_hw_rates(struct iwl_priv
*priv
,
1902 struct ieee80211_rate
*rates
)
1906 for (i
= 0; i
< IWL_RATE_COUNT
; i
++) {
1907 rates
[i
].bitrate
= iwl3945_rates
[i
].ieee
* 5;
1908 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
1909 rates
[i
].hw_value_short
= i
;
1911 if ((i
> IWL39_LAST_OFDM_RATE
) || (i
< IWL_FIRST_OFDM_RATE
)) {
1913 * If CCK != 1M then set short preamble rate flag.
1915 rates
[i
].flags
|= (iwl3945_rates
[i
].plcp
== 10) ?
1916 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
1921 /******************************************************************************
1923 * uCode download functions
1925 ******************************************************************************/
1927 static void iwl3945_dealloc_ucode_pci(struct iwl_priv
*priv
)
1929 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_code
);
1930 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_data
);
1931 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_data_backup
);
1932 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_init
);
1933 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_init_data
);
1934 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_boot
);
1938 * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
1939 * looking at all data.
1941 static int iwl3945_verify_inst_full(struct iwl_priv
*priv
, __le32
*image
, u32 len
)
1948 IWL_DEBUG_INFO(priv
, "ucode inst image size is %u\n", len
);
1950 iwl_write_direct32(priv
, HBUS_TARG_MEM_RADDR
,
1951 IWL39_RTC_INST_LOWER_BOUND
);
1954 for (; len
> 0; len
-= sizeof(u32
), image
++) {
1955 /* read data comes through single port, auto-incr addr */
1956 /* NOTE: Use the debugless read so we don't flood kernel log
1957 * if IWL_DL_IO is set */
1958 val
= _iwl_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
1959 if (val
!= le32_to_cpu(*image
)) {
1960 IWL_ERR(priv
, "uCode INST section is invalid at "
1961 "offset 0x%x, is 0x%x, s/b 0x%x\n",
1962 save_len
- len
, val
, le32_to_cpu(*image
));
1972 IWL_DEBUG_INFO(priv
,
1973 "ucode image in INSTRUCTION memory is good\n");
1980 * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
1981 * using sample data 100 bytes apart. If these sample points are good,
1982 * it's a pretty good bet that everything between them is good, too.
1984 static int iwl3945_verify_inst_sparse(struct iwl_priv
*priv
, __le32
*image
, u32 len
)
1991 IWL_DEBUG_INFO(priv
, "ucode inst image size is %u\n", len
);
1993 for (i
= 0; i
< len
; i
+= 100, image
+= 100/sizeof(u32
)) {
1994 /* read data comes through single port, auto-incr addr */
1995 /* NOTE: Use the debugless read so we don't flood kernel log
1996 * if IWL_DL_IO is set */
1997 iwl_write_direct32(priv
, HBUS_TARG_MEM_RADDR
,
1998 i
+ IWL39_RTC_INST_LOWER_BOUND
);
1999 val
= _iwl_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
2000 if (val
!= le32_to_cpu(*image
)) {
2001 #if 0 /* Enable this if you want to see details */
2002 IWL_ERR(priv
, "uCode INST section is invalid at "
2003 "offset 0x%x, is 0x%x, s/b 0x%x\n",
2018 * iwl3945_verify_ucode - determine which instruction image is in SRAM,
2019 * and verify its contents
2021 static int iwl3945_verify_ucode(struct iwl_priv
*priv
)
2028 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
2029 len
= priv
->ucode_boot
.len
;
2030 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
2032 IWL_DEBUG_INFO(priv
, "Bootstrap uCode is good in inst SRAM\n");
2036 /* Try initialize */
2037 image
= (__le32
*)priv
->ucode_init
.v_addr
;
2038 len
= priv
->ucode_init
.len
;
2039 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
2041 IWL_DEBUG_INFO(priv
, "Initialize uCode is good in inst SRAM\n");
2045 /* Try runtime/protocol */
2046 image
= (__le32
*)priv
->ucode_code
.v_addr
;
2047 len
= priv
->ucode_code
.len
;
2048 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
2050 IWL_DEBUG_INFO(priv
, "Runtime uCode is good in inst SRAM\n");
2054 IWL_ERR(priv
, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
2056 /* Since nothing seems to match, show first several data entries in
2057 * instruction SRAM, so maybe visual inspection will give a clue.
2058 * Selection of bootstrap image (vs. other images) is arbitrary. */
2059 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
2060 len
= priv
->ucode_boot
.len
;
2061 rc
= iwl3945_verify_inst_full(priv
, image
, len
);
2066 static void iwl3945_nic_start(struct iwl_priv
*priv
)
2068 /* Remove all resets to allow NIC to operate */
2069 iwl_write32(priv
, CSR_RESET
, 0);
2073 * iwl3945_read_ucode - Read uCode images from disk file.
2075 * Copy into buffers for card to fetch via bus-mastering
2077 static int iwl3945_read_ucode(struct iwl_priv
*priv
)
2079 const struct iwl_ucode_header
*ucode
;
2080 int ret
= -EINVAL
, index
;
2081 const struct firmware
*ucode_raw
;
2082 /* firmware file name contains uCode/driver compatibility version */
2083 const char *name_pre
= priv
->cfg
->fw_name_pre
;
2084 const unsigned int api_max
= priv
->cfg
->ucode_api_max
;
2085 const unsigned int api_min
= priv
->cfg
->ucode_api_min
;
2089 u32 api_ver
, inst_size
, data_size
, init_size
, init_data_size
, boot_size
;
2091 /* Ask kernel firmware_class module to get the boot firmware off disk.
2092 * request_firmware() is synchronous, file is in memory on return. */
2093 for (index
= api_max
; index
>= api_min
; index
--) {
2094 sprintf(buf
, "%s%u%s", name_pre
, index
, ".ucode");
2095 ret
= request_firmware(&ucode_raw
, buf
, &priv
->pci_dev
->dev
);
2097 IWL_ERR(priv
, "%s firmware file req failed: %d\n",
2104 if (index
< api_max
)
2105 IWL_ERR(priv
, "Loaded firmware %s, "
2106 "which is deprecated. "
2107 " Please use API v%u instead.\n",
2109 IWL_DEBUG_INFO(priv
, "Got firmware '%s' file "
2110 "(%zd bytes) from disk\n",
2111 buf
, ucode_raw
->size
);
2119 /* Make sure that we got at least our header! */
2120 if (ucode_raw
->size
< priv
->cfg
->ops
->ucode
->get_header_size(1)) {
2121 IWL_ERR(priv
, "File size way too small!\n");
2126 /* Data from ucode file: header followed by uCode images */
2127 ucode
= (struct iwl_ucode_header
*)ucode_raw
->data
;
2129 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
2130 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
2131 inst_size
= priv
->cfg
->ops
->ucode
->get_inst_size(ucode
, api_ver
);
2132 data_size
= priv
->cfg
->ops
->ucode
->get_data_size(ucode
, api_ver
);
2133 init_size
= priv
->cfg
->ops
->ucode
->get_init_size(ucode
, api_ver
);
2135 priv
->cfg
->ops
->ucode
->get_init_data_size(ucode
, api_ver
);
2136 boot_size
= priv
->cfg
->ops
->ucode
->get_boot_size(ucode
, api_ver
);
2137 src
= priv
->cfg
->ops
->ucode
->get_data(ucode
, api_ver
);
2139 /* api_ver should match the api version forming part of the
2140 * firmware filename ... but we don't check for that and only rely
2141 * on the API version read from firmware header from here on forward */
2143 if (api_ver
< api_min
|| api_ver
> api_max
) {
2144 IWL_ERR(priv
, "Driver unable to support your firmware API. "
2145 "Driver supports v%u, firmware is v%u.\n",
2147 priv
->ucode_ver
= 0;
2151 if (api_ver
!= api_max
)
2152 IWL_ERR(priv
, "Firmware has old API version. Expected %u, "
2153 "got %u. New firmware can be obtained "
2154 "from http://www.intellinuxwireless.org.\n",
2157 IWL_INFO(priv
, "loaded firmware version %u.%u.%u.%u\n",
2158 IWL_UCODE_MAJOR(priv
->ucode_ver
),
2159 IWL_UCODE_MINOR(priv
->ucode_ver
),
2160 IWL_UCODE_API(priv
->ucode_ver
),
2161 IWL_UCODE_SERIAL(priv
->ucode_ver
));
2163 IWL_DEBUG_INFO(priv
, "f/w package hdr ucode version raw = 0x%x\n",
2165 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime inst size = %u\n",
2167 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime data size = %u\n",
2169 IWL_DEBUG_INFO(priv
, "f/w package hdr init inst size = %u\n",
2171 IWL_DEBUG_INFO(priv
, "f/w package hdr init data size = %u\n",
2173 IWL_DEBUG_INFO(priv
, "f/w package hdr boot inst size = %u\n",
2177 /* Verify size of file vs. image size info in file's header */
2178 if (ucode_raw
->size
!= priv
->cfg
->ops
->ucode
->get_header_size(api_ver
) +
2179 inst_size
+ data_size
+ init_size
+
2180 init_data_size
+ boot_size
) {
2182 IWL_DEBUG_INFO(priv
,
2183 "uCode file size %zd does not match expected size\n",
2189 /* Verify that uCode images will fit in card's SRAM */
2190 if (inst_size
> IWL39_MAX_INST_SIZE
) {
2191 IWL_DEBUG_INFO(priv
, "uCode instr len %d too large to fit in\n",
2197 if (data_size
> IWL39_MAX_DATA_SIZE
) {
2198 IWL_DEBUG_INFO(priv
, "uCode data len %d too large to fit in\n",
2203 if (init_size
> IWL39_MAX_INST_SIZE
) {
2204 IWL_DEBUG_INFO(priv
,
2205 "uCode init instr len %d too large to fit in\n",
2210 if (init_data_size
> IWL39_MAX_DATA_SIZE
) {
2211 IWL_DEBUG_INFO(priv
,
2212 "uCode init data len %d too large to fit in\n",
2217 if (boot_size
> IWL39_MAX_BSM_SIZE
) {
2218 IWL_DEBUG_INFO(priv
,
2219 "uCode boot instr len %d too large to fit in\n",
2225 /* Allocate ucode buffers for card's bus-master loading ... */
2227 /* Runtime instructions and 2 copies of data:
2228 * 1) unmodified from disk
2229 * 2) backup cache for save/restore during power-downs */
2230 priv
->ucode_code
.len
= inst_size
;
2231 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_code
);
2233 priv
->ucode_data
.len
= data_size
;
2234 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_data
);
2236 priv
->ucode_data_backup
.len
= data_size
;
2237 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_data_backup
);
2239 if (!priv
->ucode_code
.v_addr
|| !priv
->ucode_data
.v_addr
||
2240 !priv
->ucode_data_backup
.v_addr
)
2243 /* Initialization instructions and data */
2244 if (init_size
&& init_data_size
) {
2245 priv
->ucode_init
.len
= init_size
;
2246 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_init
);
2248 priv
->ucode_init_data
.len
= init_data_size
;
2249 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_init_data
);
2251 if (!priv
->ucode_init
.v_addr
|| !priv
->ucode_init_data
.v_addr
)
2255 /* Bootstrap (instructions only, no data) */
2257 priv
->ucode_boot
.len
= boot_size
;
2258 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_boot
);
2260 if (!priv
->ucode_boot
.v_addr
)
2264 /* Copy images into buffers for card's bus-master reads ... */
2266 /* Runtime instructions (first block of data in file) */
2268 IWL_DEBUG_INFO(priv
,
2269 "Copying (but not loading) uCode instr len %zd\n", len
);
2270 memcpy(priv
->ucode_code
.v_addr
, src
, len
);
2273 IWL_DEBUG_INFO(priv
, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
2274 priv
->ucode_code
.v_addr
, (u32
)priv
->ucode_code
.p_addr
);
2276 /* Runtime data (2nd block)
2277 * NOTE: Copy into backup buffer will be done in iwl3945_up() */
2279 IWL_DEBUG_INFO(priv
,
2280 "Copying (but not loading) uCode data len %zd\n", len
);
2281 memcpy(priv
->ucode_data
.v_addr
, src
, len
);
2282 memcpy(priv
->ucode_data_backup
.v_addr
, src
, len
);
2285 /* Initialization instructions (3rd block) */
2288 IWL_DEBUG_INFO(priv
,
2289 "Copying (but not loading) init instr len %zd\n", len
);
2290 memcpy(priv
->ucode_init
.v_addr
, src
, len
);
2294 /* Initialization data (4th block) */
2295 if (init_data_size
) {
2296 len
= init_data_size
;
2297 IWL_DEBUG_INFO(priv
,
2298 "Copying (but not loading) init data len %zd\n", len
);
2299 memcpy(priv
->ucode_init_data
.v_addr
, src
, len
);
2303 /* Bootstrap instructions (5th block) */
2305 IWL_DEBUG_INFO(priv
,
2306 "Copying (but not loading) boot instr len %zd\n", len
);
2307 memcpy(priv
->ucode_boot
.v_addr
, src
, len
);
2309 /* We have our copies now, allow OS release its copies */
2310 release_firmware(ucode_raw
);
2314 IWL_ERR(priv
, "failed to allocate pci memory\n");
2316 iwl3945_dealloc_ucode_pci(priv
);
2319 release_firmware(ucode_raw
);
2327 * iwl3945_set_ucode_ptrs - Set uCode address location
2329 * Tell initialization uCode where to find runtime uCode.
2331 * BSM registers initially contain pointers to initialization uCode.
2332 * We need to replace them to load runtime uCode inst and data,
2333 * and to save runtime data when powering down.
2335 static int iwl3945_set_ucode_ptrs(struct iwl_priv
*priv
)
2340 /* bits 31:0 for 3945 */
2341 pinst
= priv
->ucode_code
.p_addr
;
2342 pdata
= priv
->ucode_data_backup
.p_addr
;
2344 /* Tell bootstrap uCode where to find image to load */
2345 iwl_write_prph(priv
, BSM_DRAM_INST_PTR_REG
, pinst
);
2346 iwl_write_prph(priv
, BSM_DRAM_DATA_PTR_REG
, pdata
);
2347 iwl_write_prph(priv
, BSM_DRAM_DATA_BYTECOUNT_REG
,
2348 priv
->ucode_data
.len
);
2350 /* Inst byte count must be last to set up, bit 31 signals uCode
2351 * that all new ptr/size info is in place */
2352 iwl_write_prph(priv
, BSM_DRAM_INST_BYTECOUNT_REG
,
2353 priv
->ucode_code
.len
| BSM_DRAM_INST_LOAD
);
2355 IWL_DEBUG_INFO(priv
, "Runtime uCode pointers are set.\n");
2361 * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
2363 * Called after REPLY_ALIVE notification received from "initialize" uCode.
2365 * Tell "initialize" uCode to go ahead and load the runtime uCode.
2367 static void iwl3945_init_alive_start(struct iwl_priv
*priv
)
2369 /* Check alive response for "valid" sign from uCode */
2370 if (priv
->card_alive_init
.is_valid
!= UCODE_VALID_OK
) {
2371 /* We had an error bringing up the hardware, so take it
2372 * all the way back down so we can try again */
2373 IWL_DEBUG_INFO(priv
, "Initialize Alive failed.\n");
2377 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
2378 * This is a paranoid check, because we would not have gotten the
2379 * "initialize" alive if code weren't properly loaded. */
2380 if (iwl3945_verify_ucode(priv
)) {
2381 /* Runtime instruction load was bad;
2382 * take it all the way back down so we can try again */
2383 IWL_DEBUG_INFO(priv
, "Bad \"initialize\" uCode load.\n");
2387 /* Send pointers to protocol/runtime uCode image ... init code will
2388 * load and launch runtime uCode, which will send us another "Alive"
2390 IWL_DEBUG_INFO(priv
, "Initialization Alive received.\n");
2391 if (iwl3945_set_ucode_ptrs(priv
)) {
2392 /* Runtime instruction load won't happen;
2393 * take it all the way back down so we can try again */
2394 IWL_DEBUG_INFO(priv
, "Couldn't set up uCode pointers.\n");
2400 queue_work(priv
->workqueue
, &priv
->restart
);
2404 * iwl3945_alive_start - called after REPLY_ALIVE notification received
2405 * from protocol/runtime uCode (initialization uCode's
2406 * Alive gets handled by iwl3945_init_alive_start()).
2408 static void iwl3945_alive_start(struct iwl_priv
*priv
)
2410 int thermal_spin
= 0;
2413 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
2415 if (priv
->card_alive
.is_valid
!= UCODE_VALID_OK
) {
2416 /* We had an error bringing up the hardware, so take it
2417 * all the way back down so we can try again */
2418 IWL_DEBUG_INFO(priv
, "Alive failed.\n");
2422 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2423 * This is a paranoid check, because we would not have gotten the
2424 * "runtime" alive if code weren't properly loaded. */
2425 if (iwl3945_verify_ucode(priv
)) {
2426 /* Runtime instruction load was bad;
2427 * take it all the way back down so we can try again */
2428 IWL_DEBUG_INFO(priv
, "Bad runtime uCode load.\n");
2432 iwl_clear_stations_table(priv
);
2434 rfkill
= iwl_read_prph(priv
, APMG_RFKILL_REG
);
2435 IWL_DEBUG_INFO(priv
, "RFKILL status: 0x%x\n", rfkill
);
2438 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2439 /* if RFKILL is not on, then wait for thermal
2440 * sensor in adapter to kick in */
2441 while (iwl3945_hw_get_temperature(priv
) == 0) {
2447 IWL_DEBUG_INFO(priv
, "Thermal calibration took %dus\n",
2450 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2452 /* After the ALIVE response, we can send commands to 3945 uCode */
2453 set_bit(STATUS_ALIVE
, &priv
->status
);
2455 if (iwl_is_rfkill(priv
))
2458 ieee80211_wake_queues(priv
->hw
);
2460 priv
->active_rate
= priv
->rates_mask
;
2461 priv
->active_rate_basic
= priv
->rates_mask
& IWL_BASIC_RATES_MASK
;
2463 iwl_power_update_mode(priv
, false);
2465 if (iwl_is_associated(priv
)) {
2466 struct iwl3945_rxon_cmd
*active_rxon
=
2467 (struct iwl3945_rxon_cmd
*)(&priv
->active_rxon
);
2469 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
2470 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
2472 /* Initialize our rx_config data */
2473 iwl_connection_init_rx_config(priv
, priv
->iw_mode
);
2476 /* Configure Bluetooth device coexistence support */
2477 iwl_send_bt_config(priv
);
2479 /* Configure the adapter for unassociated operation */
2480 iwlcore_commit_rxon(priv
);
2482 iwl3945_reg_txpower_periodic(priv
);
2484 iwl_leds_init(priv
);
2486 IWL_DEBUG_INFO(priv
, "ALIVE processing complete.\n");
2487 set_bit(STATUS_READY
, &priv
->status
);
2488 wake_up_interruptible(&priv
->wait_command_queue
);
2490 /* reassociate for ADHOC mode */
2491 if (priv
->vif
&& (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)) {
2492 struct sk_buff
*beacon
= ieee80211_beacon_get(priv
->hw
,
2495 iwl_mac_beacon_update(priv
->hw
, beacon
);
2498 if (test_and_clear_bit(STATUS_MODE_PENDING
, &priv
->status
))
2499 iwl_set_mode(priv
, priv
->iw_mode
);
2504 queue_work(priv
->workqueue
, &priv
->restart
);
2507 static void iwl3945_cancel_deferred_work(struct iwl_priv
*priv
);
2509 static void __iwl3945_down(struct iwl_priv
*priv
)
2511 unsigned long flags
;
2512 int exit_pending
= test_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2513 struct ieee80211_conf
*conf
= NULL
;
2515 IWL_DEBUG_INFO(priv
, DRV_NAME
" is going down\n");
2517 conf
= ieee80211_get_hw_conf(priv
->hw
);
2520 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2522 iwl_clear_stations_table(priv
);
2524 /* Unblock any waiting calls */
2525 wake_up_interruptible_all(&priv
->wait_command_queue
);
2527 /* Wipe out the EXIT_PENDING status bit if we are not actually
2528 * exiting the module */
2530 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2532 /* stop and reset the on-board processor */
2533 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
2535 /* tell the device to stop sending interrupts */
2536 spin_lock_irqsave(&priv
->lock
, flags
);
2537 iwl_disable_interrupts(priv
);
2538 spin_unlock_irqrestore(&priv
->lock
, flags
);
2539 iwl_synchronize_irq(priv
);
2541 if (priv
->mac80211_registered
)
2542 ieee80211_stop_queues(priv
->hw
);
2544 /* If we have not previously called iwl3945_init() then
2545 * clear all bits but the RF Kill bits and return */
2546 if (!iwl_is_init(priv
)) {
2547 priv
->status
= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
2549 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
2550 STATUS_GEO_CONFIGURED
|
2551 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
2552 STATUS_EXIT_PENDING
;
2556 /* ...otherwise clear out all the status bits but the RF Kill
2557 * bit and continue taking the NIC down. */
2558 priv
->status
&= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
2560 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
2561 STATUS_GEO_CONFIGURED
|
2562 test_bit(STATUS_FW_ERROR
, &priv
->status
) <<
2564 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
2565 STATUS_EXIT_PENDING
;
2567 iwl3945_hw_txq_ctx_stop(priv
);
2568 iwl3945_hw_rxq_stop(priv
);
2570 iwl_write_prph(priv
, APMG_CLK_DIS_REG
,
2571 APMG_CLK_VAL_DMA_CLK_RQT
);
2575 /* Stop the device, and put it in low power state */
2576 priv
->cfg
->ops
->lib
->apm_ops
.stop(priv
);
2579 memset(&priv
->card_alive
, 0, sizeof(struct iwl_alive_resp
));
2581 if (priv
->ibss_beacon
)
2582 dev_kfree_skb(priv
->ibss_beacon
);
2583 priv
->ibss_beacon
= NULL
;
2585 /* clear out any free frames */
2586 iwl3945_clear_free_frames(priv
);
2589 static void iwl3945_down(struct iwl_priv
*priv
)
2591 mutex_lock(&priv
->mutex
);
2592 __iwl3945_down(priv
);
2593 mutex_unlock(&priv
->mutex
);
2595 iwl3945_cancel_deferred_work(priv
);
2598 #define MAX_HW_RESTARTS 5
2600 static int __iwl3945_up(struct iwl_priv
*priv
)
2604 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
2605 IWL_WARN(priv
, "Exit pending; will not bring the NIC up\n");
2609 if (!priv
->ucode_data_backup
.v_addr
|| !priv
->ucode_data
.v_addr
) {
2610 IWL_ERR(priv
, "ucode not available for device bring up\n");
2614 /* If platform's RF_KILL switch is NOT set to KILL */
2615 if (iwl_read32(priv
, CSR_GP_CNTRL
) &
2616 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
2617 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2619 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2620 IWL_WARN(priv
, "Radio disabled by HW RF Kill switch\n");
2624 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2626 rc
= iwl3945_hw_nic_init(priv
);
2628 IWL_ERR(priv
, "Unable to int nic\n");
2632 /* make sure rfkill handshake bits are cleared */
2633 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2634 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
2635 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
2637 /* clear (again), then enable host interrupts */
2638 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2639 iwl_enable_interrupts(priv
);
2641 /* really make sure rfkill handshake bits are cleared */
2642 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2643 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2645 /* Copy original ucode data image from disk into backup cache.
2646 * This will be used to initialize the on-board processor's
2647 * data SRAM for a clean start when the runtime program first loads. */
2648 memcpy(priv
->ucode_data_backup
.v_addr
, priv
->ucode_data
.v_addr
,
2649 priv
->ucode_data
.len
);
2651 /* We return success when we resume from suspend and rf_kill is on. */
2652 if (test_bit(STATUS_RF_KILL_HW
, &priv
->status
))
2655 for (i
= 0; i
< MAX_HW_RESTARTS
; i
++) {
2657 iwl_clear_stations_table(priv
);
2659 /* load bootstrap state machine,
2660 * load bootstrap program into processor's memory,
2661 * prepare to load the "initialize" uCode */
2662 priv
->cfg
->ops
->lib
->load_ucode(priv
);
2666 "Unable to set up bootstrap uCode: %d\n", rc
);
2670 /* start card; "initialize" will load runtime ucode */
2671 iwl3945_nic_start(priv
);
2673 IWL_DEBUG_INFO(priv
, DRV_NAME
" is coming up\n");
2678 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2679 __iwl3945_down(priv
);
2680 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2682 /* tried to restart and config the device for as long as our
2683 * patience could withstand */
2684 IWL_ERR(priv
, "Unable to initialize device after %d attempts.\n", i
);
2689 /*****************************************************************************
2691 * Workqueue callbacks
2693 *****************************************************************************/
2695 static void iwl3945_bg_init_alive_start(struct work_struct
*data
)
2697 struct iwl_priv
*priv
=
2698 container_of(data
, struct iwl_priv
, init_alive_start
.work
);
2700 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2703 mutex_lock(&priv
->mutex
);
2704 iwl3945_init_alive_start(priv
);
2705 mutex_unlock(&priv
->mutex
);
2708 static void iwl3945_bg_alive_start(struct work_struct
*data
)
2710 struct iwl_priv
*priv
=
2711 container_of(data
, struct iwl_priv
, alive_start
.work
);
2713 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2716 mutex_lock(&priv
->mutex
);
2717 iwl3945_alive_start(priv
);
2718 mutex_unlock(&priv
->mutex
);
2722 * 3945 cannot interrupt driver when hardware rf kill switch toggles;
2723 * driver must poll CSR_GP_CNTRL_REG register for change. This register
2724 * *is* readable even when device has been SW_RESET into low power mode
2725 * (e.g. during RF KILL).
2727 static void iwl3945_rfkill_poll(struct work_struct
*data
)
2729 struct iwl_priv
*priv
=
2730 container_of(data
, struct iwl_priv
, rfkill_poll
.work
);
2731 bool old_rfkill
= test_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2732 bool new_rfkill
= !(iwl_read32(priv
, CSR_GP_CNTRL
)
2733 & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
);
2735 if (new_rfkill
!= old_rfkill
) {
2737 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2739 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2741 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
, new_rfkill
);
2743 IWL_DEBUG_RF_KILL(priv
, "RF_KILL bit toggled to %s.\n",
2744 new_rfkill
? "disable radio" : "enable radio");
2747 /* Keep this running, even if radio now enabled. This will be
2748 * cancelled in mac_start() if system decides to start again */
2749 queue_delayed_work(priv
->workqueue
, &priv
->rfkill_poll
,
2750 round_jiffies_relative(2 * HZ
));
2754 #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
2755 static void iwl3945_bg_request_scan(struct work_struct
*data
)
2757 struct iwl_priv
*priv
=
2758 container_of(data
, struct iwl_priv
, request_scan
);
2759 struct iwl_host_cmd cmd
= {
2760 .id
= REPLY_SCAN_CMD
,
2761 .len
= sizeof(struct iwl3945_scan_cmd
),
2762 .flags
= CMD_SIZE_HUGE
,
2765 struct iwl3945_scan_cmd
*scan
;
2766 struct ieee80211_conf
*conf
= NULL
;
2768 enum ieee80211_band band
;
2769 bool is_active
= false;
2771 conf
= ieee80211_get_hw_conf(priv
->hw
);
2773 mutex_lock(&priv
->mutex
);
2775 cancel_delayed_work(&priv
->scan_check
);
2777 if (!iwl_is_ready(priv
)) {
2778 IWL_WARN(priv
, "request scan called when driver not ready.\n");
2782 /* Make sure the scan wasn't canceled before this queued work
2783 * was given the chance to run... */
2784 if (!test_bit(STATUS_SCANNING
, &priv
->status
))
2787 /* This should never be called or scheduled if there is currently
2788 * a scan active in the hardware. */
2789 if (test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
2790 IWL_DEBUG_INFO(priv
, "Multiple concurrent scan requests "
2791 "Ignoring second request.\n");
2796 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
2797 IWL_DEBUG_SCAN(priv
, "Aborting scan due to device shutdown\n");
2801 if (test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
2803 "Scan request while abort pending. Queuing.\n");
2807 if (iwl_is_rfkill(priv
)) {
2808 IWL_DEBUG_HC(priv
, "Aborting scan due to RF Kill activation\n");
2812 if (!test_bit(STATUS_READY
, &priv
->status
)) {
2814 "Scan request while uninitialized. Queuing.\n");
2818 if (!priv
->scan_bands
) {
2819 IWL_DEBUG_HC(priv
, "Aborting scan due to no requested bands\n");
2824 priv
->scan
= kmalloc(sizeof(struct iwl3945_scan_cmd
) +
2825 IWL_MAX_SCAN_SIZE
, GFP_KERNEL
);
2832 memset(scan
, 0, sizeof(struct iwl3945_scan_cmd
) + IWL_MAX_SCAN_SIZE
);
2834 scan
->quiet_plcp_th
= IWL_PLCP_QUIET_THRESH
;
2835 scan
->quiet_time
= IWL_ACTIVE_QUIET_TIME
;
2837 if (iwl_is_associated(priv
)) {
2840 u32 suspend_time
= 100;
2841 u32 scan_suspend_time
= 100;
2842 unsigned long flags
;
2844 IWL_DEBUG_INFO(priv
, "Scanning while associated...\n");
2846 spin_lock_irqsave(&priv
->lock
, flags
);
2847 interval
= priv
->beacon_int
;
2848 spin_unlock_irqrestore(&priv
->lock
, flags
);
2850 scan
->suspend_time
= 0;
2851 scan
->max_out_time
= cpu_to_le32(200 * 1024);
2853 interval
= suspend_time
;
2855 * suspend time format:
2856 * 0-19: beacon interval in usec (time before exec.)
2858 * 24-31: number of beacons (suspend between channels)
2861 extra
= (suspend_time
/ interval
) << 24;
2862 scan_suspend_time
= 0xFF0FFFFF &
2863 (extra
| ((suspend_time
% interval
) * 1024));
2865 scan
->suspend_time
= cpu_to_le32(scan_suspend_time
);
2866 IWL_DEBUG_SCAN(priv
, "suspend_time 0x%X beacon interval %d\n",
2867 scan_suspend_time
, interval
);
2870 if (priv
->scan_request
->n_ssids
) {
2872 IWL_DEBUG_SCAN(priv
, "Kicking off active scan\n");
2873 for (i
= 0; i
< priv
->scan_request
->n_ssids
; i
++) {
2874 /* always does wildcard anyway */
2875 if (!priv
->scan_request
->ssids
[i
].ssid_len
)
2877 scan
->direct_scan
[p
].id
= WLAN_EID_SSID
;
2878 scan
->direct_scan
[p
].len
=
2879 priv
->scan_request
->ssids
[i
].ssid_len
;
2880 memcpy(scan
->direct_scan
[p
].ssid
,
2881 priv
->scan_request
->ssids
[i
].ssid
,
2882 priv
->scan_request
->ssids
[i
].ssid_len
);
2888 IWL_DEBUG_SCAN(priv
, "Kicking off passive scan.\n");
2890 /* We don't build a direct scan probe request; the uCode will do
2891 * that based on the direct_mask added to each channel entry */
2892 scan
->tx_cmd
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
;
2893 scan
->tx_cmd
.sta_id
= priv
->hw_params
.bcast_sta_id
;
2894 scan
->tx_cmd
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
2896 /* flags + rate selection */
2898 if (priv
->scan_bands
& BIT(IEEE80211_BAND_2GHZ
)) {
2899 scan
->flags
= RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
;
2900 scan
->tx_cmd
.rate
= IWL_RATE_1M_PLCP
;
2901 scan
->good_CRC_th
= 0;
2902 band
= IEEE80211_BAND_2GHZ
;
2903 } else if (priv
->scan_bands
& BIT(IEEE80211_BAND_5GHZ
)) {
2904 scan
->tx_cmd
.rate
= IWL_RATE_6M_PLCP
;
2906 * If active scaning is requested but a certain channel
2907 * is marked passive, we can do active scanning if we
2908 * detect transmissions.
2910 scan
->good_CRC_th
= is_active
? IWL_GOOD_CRC_TH
: 0;
2911 band
= IEEE80211_BAND_5GHZ
;
2913 IWL_WARN(priv
, "Invalid scan band count\n");
2917 scan
->tx_cmd
.len
= cpu_to_le16(
2918 iwl_fill_probe_req(priv
,
2919 (struct ieee80211_mgmt
*)scan
->data
,
2920 priv
->scan_request
->ie
,
2921 priv
->scan_request
->ie_len
,
2922 IWL_MAX_SCAN_SIZE
- sizeof(*scan
)));
2924 /* select Rx antennas */
2925 scan
->flags
|= iwl3945_get_antenna_flags(priv
);
2927 if (iwl_is_monitor_mode(priv
))
2928 scan
->filter_flags
= RXON_FILTER_PROMISC_MSK
;
2930 scan
->channel_count
=
2931 iwl3945_get_channels_for_scan(priv
, band
, is_active
, n_probes
,
2932 (void *)&scan
->data
[le16_to_cpu(scan
->tx_cmd
.len
)]);
2934 if (scan
->channel_count
== 0) {
2935 IWL_DEBUG_SCAN(priv
, "channel count %d\n", scan
->channel_count
);
2939 cmd
.len
+= le16_to_cpu(scan
->tx_cmd
.len
) +
2940 scan
->channel_count
* sizeof(struct iwl3945_scan_channel
);
2942 scan
->len
= cpu_to_le16(cmd
.len
);
2944 set_bit(STATUS_SCAN_HW
, &priv
->status
);
2945 rc
= iwl_send_cmd_sync(priv
, &cmd
);
2949 queue_delayed_work(priv
->workqueue
, &priv
->scan_check
,
2950 IWL_SCAN_CHECK_WATCHDOG
);
2952 mutex_unlock(&priv
->mutex
);
2956 /* can not perform scan make sure we clear scanning
2957 * bits from status so next scan request can be performed.
2958 * if we dont clear scanning status bit here all next scan
2961 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
2962 clear_bit(STATUS_SCANNING
, &priv
->status
);
2964 /* inform mac80211 scan aborted */
2965 queue_work(priv
->workqueue
, &priv
->scan_completed
);
2966 mutex_unlock(&priv
->mutex
);
2969 static void iwl3945_bg_up(struct work_struct
*data
)
2971 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, up
);
2973 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2976 mutex_lock(&priv
->mutex
);
2978 mutex_unlock(&priv
->mutex
);
2981 static void iwl3945_bg_restart(struct work_struct
*data
)
2983 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, restart
);
2985 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2988 if (test_and_clear_bit(STATUS_FW_ERROR
, &priv
->status
)) {
2989 mutex_lock(&priv
->mutex
);
2992 mutex_unlock(&priv
->mutex
);
2994 ieee80211_restart_hw(priv
->hw
);
2997 queue_work(priv
->workqueue
, &priv
->up
);
3001 static void iwl3945_bg_rx_replenish(struct work_struct
*data
)
3003 struct iwl_priv
*priv
=
3004 container_of(data
, struct iwl_priv
, rx_replenish
);
3006 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
3009 mutex_lock(&priv
->mutex
);
3010 iwl3945_rx_replenish(priv
);
3011 mutex_unlock(&priv
->mutex
);
3014 #define IWL_DELAY_NEXT_SCAN (HZ*2)
3016 void iwl3945_post_associate(struct iwl_priv
*priv
)
3019 struct ieee80211_conf
*conf
= NULL
;
3021 if (priv
->iw_mode
== NL80211_IFTYPE_AP
) {
3022 IWL_ERR(priv
, "%s Should not be called in AP mode\n", __func__
);
3027 IWL_DEBUG_ASSOC(priv
, "Associated as %d to: %pM\n",
3028 priv
->assoc_id
, priv
->active_rxon
.bssid_addr
);
3030 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
3033 if (!priv
->vif
|| !priv
->is_open
)
3036 iwl_scan_cancel_timeout(priv
, 200);
3038 conf
= ieee80211_get_hw_conf(priv
->hw
);
3040 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3041 iwlcore_commit_rxon(priv
);
3043 memset(&priv
->rxon_timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
3044 iwl_setup_rxon_timing(priv
);
3045 rc
= iwl_send_cmd_pdu(priv
, REPLY_RXON_TIMING
,
3046 sizeof(priv
->rxon_timing
), &priv
->rxon_timing
);
3048 IWL_WARN(priv
, "REPLY_RXON_TIMING failed - "
3049 "Attempting to continue.\n");
3051 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
3053 priv
->staging_rxon
.assoc_id
= cpu_to_le16(priv
->assoc_id
);
3055 IWL_DEBUG_ASSOC(priv
, "assoc id %d beacon interval %d\n",
3056 priv
->assoc_id
, priv
->beacon_int
);
3058 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_PREAMBLE
)
3059 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
3061 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
3063 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) {
3064 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_SLOT_TIME
)
3065 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
3067 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
3069 if (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)
3070 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
3074 iwlcore_commit_rxon(priv
);
3076 switch (priv
->iw_mode
) {
3077 case NL80211_IFTYPE_STATION
:
3078 iwl3945_rate_scale_init(priv
->hw
, IWL_AP_ID
);
3081 case NL80211_IFTYPE_ADHOC
:
3084 iwl_add_station(priv
, priv
->bssid
, 0, CMD_SYNC
, NULL
);
3085 iwl3945_sync_sta(priv
, IWL_STA_ID
,
3086 (priv
->band
== IEEE80211_BAND_5GHZ
) ?
3087 IWL_RATE_6M_PLCP
: IWL_RATE_1M_PLCP
,
3089 iwl3945_rate_scale_init(priv
->hw
, IWL_STA_ID
);
3090 iwl3945_send_beacon_cmd(priv
);
3095 IWL_ERR(priv
, "%s Should not be called in %d mode\n",
3096 __func__
, priv
->iw_mode
);
3100 iwl_activate_qos(priv
, 0);
3102 /* we have just associated, don't start scan too early */
3103 priv
->next_scan_jiffies
= jiffies
+ IWL_DELAY_NEXT_SCAN
;
3106 /*****************************************************************************
3108 * mac80211 entry point functions
3110 *****************************************************************************/
3112 #define UCODE_READY_TIMEOUT (2 * HZ)
3114 static int iwl3945_mac_start(struct ieee80211_hw
*hw
)
3116 struct iwl_priv
*priv
= hw
->priv
;
3119 IWL_DEBUG_MAC80211(priv
, "enter\n");
3121 /* we should be verifying the device is ready to be opened */
3122 mutex_lock(&priv
->mutex
);
3124 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
3125 * ucode filename and max sizes are card-specific. */
3127 if (!priv
->ucode_code
.len
) {
3128 ret
= iwl3945_read_ucode(priv
);
3130 IWL_ERR(priv
, "Could not read microcode: %d\n", ret
);
3131 mutex_unlock(&priv
->mutex
);
3132 goto out_release_irq
;
3136 ret
= __iwl3945_up(priv
);
3138 mutex_unlock(&priv
->mutex
);
3141 goto out_release_irq
;
3143 IWL_DEBUG_INFO(priv
, "Start UP work.\n");
3145 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
3146 * mac80211 will not be run successfully. */
3147 ret
= wait_event_interruptible_timeout(priv
->wait_command_queue
,
3148 test_bit(STATUS_READY
, &priv
->status
),
3149 UCODE_READY_TIMEOUT
);
3151 if (!test_bit(STATUS_READY
, &priv
->status
)) {
3153 "Wait for START_ALIVE timeout after %dms.\n",
3154 jiffies_to_msecs(UCODE_READY_TIMEOUT
));
3156 goto out_release_irq
;
3160 /* ucode is running and will send rfkill notifications,
3161 * no need to poll the killswitch state anymore */
3162 cancel_delayed_work(&priv
->rfkill_poll
);
3164 iwl_led_start(priv
);
3167 IWL_DEBUG_MAC80211(priv
, "leave\n");
3172 IWL_DEBUG_MAC80211(priv
, "leave - failed\n");
3176 static void iwl3945_mac_stop(struct ieee80211_hw
*hw
)
3178 struct iwl_priv
*priv
= hw
->priv
;
3180 IWL_DEBUG_MAC80211(priv
, "enter\n");
3182 if (!priv
->is_open
) {
3183 IWL_DEBUG_MAC80211(priv
, "leave - skip\n");
3189 if (iwl_is_ready_rf(priv
)) {
3190 /* stop mac, cancel any scan request and clear
3191 * RXON_FILTER_ASSOC_MSK BIT
3193 mutex_lock(&priv
->mutex
);
3194 iwl_scan_cancel_timeout(priv
, 100);
3195 mutex_unlock(&priv
->mutex
);
3200 flush_workqueue(priv
->workqueue
);
3202 /* start polling the killswitch state again */
3203 queue_delayed_work(priv
->workqueue
, &priv
->rfkill_poll
,
3204 round_jiffies_relative(2 * HZ
));
3206 IWL_DEBUG_MAC80211(priv
, "leave\n");
3209 static int iwl3945_mac_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
3211 struct iwl_priv
*priv
= hw
->priv
;
3213 IWL_DEBUG_MAC80211(priv
, "enter\n");
3215 IWL_DEBUG_TX(priv
, "dev->xmit(%d bytes) at rate 0x%02x\n", skb
->len
,
3216 ieee80211_get_tx_rate(hw
, IEEE80211_SKB_CB(skb
))->bitrate
);
3218 if (iwl3945_tx_skb(priv
, skb
))
3219 dev_kfree_skb_any(skb
);
3221 IWL_DEBUG_MAC80211(priv
, "leave\n");
3222 return NETDEV_TX_OK
;
3225 void iwl3945_config_ap(struct iwl_priv
*priv
)
3229 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
3232 /* The following should be done only at AP bring up */
3233 if (!(iwl_is_associated(priv
))) {
3235 /* RXON - unassoc (to set timing command) */
3236 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3237 iwlcore_commit_rxon(priv
);
3240 memset(&priv
->rxon_timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
3241 iwl_setup_rxon_timing(priv
);
3242 rc
= iwl_send_cmd_pdu(priv
, REPLY_RXON_TIMING
,
3243 sizeof(priv
->rxon_timing
),
3244 &priv
->rxon_timing
);
3246 IWL_WARN(priv
, "REPLY_RXON_TIMING failed - "
3247 "Attempting to continue.\n");
3249 /* FIXME: what should be the assoc_id for AP? */
3250 priv
->staging_rxon
.assoc_id
= cpu_to_le16(priv
->assoc_id
);
3251 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_PREAMBLE
)
3252 priv
->staging_rxon
.flags
|=
3253 RXON_FLG_SHORT_PREAMBLE_MSK
;
3255 priv
->staging_rxon
.flags
&=
3256 ~RXON_FLG_SHORT_PREAMBLE_MSK
;
3258 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) {
3259 if (priv
->assoc_capability
&
3260 WLAN_CAPABILITY_SHORT_SLOT_TIME
)
3261 priv
->staging_rxon
.flags
|=
3262 RXON_FLG_SHORT_SLOT_MSK
;
3264 priv
->staging_rxon
.flags
&=
3265 ~RXON_FLG_SHORT_SLOT_MSK
;
3267 if (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)
3268 priv
->staging_rxon
.flags
&=
3269 ~RXON_FLG_SHORT_SLOT_MSK
;
3271 /* restore RXON assoc */
3272 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
3273 iwlcore_commit_rxon(priv
);
3274 iwl_add_station(priv
, iwl_bcast_addr
, 0, CMD_SYNC
, NULL
);
3276 iwl3945_send_beacon_cmd(priv
);
3278 /* FIXME - we need to add code here to detect a totally new
3279 * configuration, reset the AP, unassoc, rxon timing, assoc,
3280 * clear sta table, add BCAST sta... */
3283 static int iwl3945_mac_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
3284 struct ieee80211_vif
*vif
,
3285 struct ieee80211_sta
*sta
,
3286 struct ieee80211_key_conf
*key
)
3288 struct iwl_priv
*priv
= hw
->priv
;
3291 u8 sta_id
= IWL_INVALID_STATION
;
3294 IWL_DEBUG_MAC80211(priv
, "enter\n");
3296 if (iwl3945_mod_params
.sw_crypto
) {
3297 IWL_DEBUG_MAC80211(priv
, "leave - hwcrypto disabled\n");
3301 addr
= sta
? sta
->addr
: iwl_bcast_addr
;
3302 static_key
= !iwl_is_associated(priv
);
3305 sta_id
= iwl_find_station(priv
, addr
);
3306 if (sta_id
== IWL_INVALID_STATION
) {
3307 IWL_DEBUG_MAC80211(priv
, "leave - %pM not in station map.\n",
3313 mutex_lock(&priv
->mutex
);
3314 iwl_scan_cancel_timeout(priv
, 100);
3315 mutex_unlock(&priv
->mutex
);
3320 ret
= iwl3945_set_static_key(priv
, key
);
3322 ret
= iwl3945_set_dynamic_key(priv
, key
, sta_id
);
3323 IWL_DEBUG_MAC80211(priv
, "enable hwcrypto key\n");
3327 ret
= iwl3945_remove_static_key(priv
);
3329 ret
= iwl3945_clear_sta_key_info(priv
, sta_id
);
3330 IWL_DEBUG_MAC80211(priv
, "disable hwcrypto key\n");
3336 IWL_DEBUG_MAC80211(priv
, "leave\n");
3341 /*****************************************************************************
3345 *****************************************************************************/
3347 #ifdef CONFIG_IWLWIFI_DEBUG
3350 * The following adds a new attribute to the sysfs representation
3351 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
3352 * used for controlling the debug level.
3354 * See the level definitions in iwl for details.
3356 * The debug_level being managed using sysfs below is a per device debug
3357 * level that is used instead of the global debug level if it (the per
3358 * device debug level) is set.
3360 static ssize_t
show_debug_level(struct device
*d
,
3361 struct device_attribute
*attr
, char *buf
)
3363 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3364 return sprintf(buf
, "0x%08X\n", iwl_get_debug_level(priv
));
3366 static ssize_t
store_debug_level(struct device
*d
,
3367 struct device_attribute
*attr
,
3368 const char *buf
, size_t count
)
3370 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3374 ret
= strict_strtoul(buf
, 0, &val
);
3376 IWL_INFO(priv
, "%s is not in hex or decimal form.\n", buf
);
3378 priv
->debug_level
= val
;
3379 if (iwl_alloc_traffic_mem(priv
))
3381 "Not enough memory to generate traffic log\n");
3383 return strnlen(buf
, count
);
3386 static DEVICE_ATTR(debug_level
, S_IWUSR
| S_IRUGO
,
3387 show_debug_level
, store_debug_level
);
3389 #endif /* CONFIG_IWLWIFI_DEBUG */
3391 static ssize_t
show_temperature(struct device
*d
,
3392 struct device_attribute
*attr
, char *buf
)
3394 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3396 if (!iwl_is_alive(priv
))
3399 return sprintf(buf
, "%d\n", iwl3945_hw_get_temperature(priv
));
3402 static DEVICE_ATTR(temperature
, S_IRUGO
, show_temperature
, NULL
);
3404 static ssize_t
show_tx_power(struct device
*d
,
3405 struct device_attribute
*attr
, char *buf
)
3407 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3408 return sprintf(buf
, "%d\n", priv
->tx_power_user_lmt
);
3411 static ssize_t
store_tx_power(struct device
*d
,
3412 struct device_attribute
*attr
,
3413 const char *buf
, size_t count
)
3415 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3416 char *p
= (char *)buf
;
3419 val
= simple_strtoul(p
, &p
, 10);
3421 IWL_INFO(priv
, ": %s is not in decimal form.\n", buf
);
3423 iwl3945_hw_reg_set_txpower(priv
, val
);
3428 static DEVICE_ATTR(tx_power
, S_IWUSR
| S_IRUGO
, show_tx_power
, store_tx_power
);
3430 static ssize_t
show_flags(struct device
*d
,
3431 struct device_attribute
*attr
, char *buf
)
3433 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3435 return sprintf(buf
, "0x%04X\n", priv
->active_rxon
.flags
);
3438 static ssize_t
store_flags(struct device
*d
,
3439 struct device_attribute
*attr
,
3440 const char *buf
, size_t count
)
3442 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3443 u32 flags
= simple_strtoul(buf
, NULL
, 0);
3445 mutex_lock(&priv
->mutex
);
3446 if (le32_to_cpu(priv
->staging_rxon
.flags
) != flags
) {
3447 /* Cancel any currently running scans... */
3448 if (iwl_scan_cancel_timeout(priv
, 100))
3449 IWL_WARN(priv
, "Could not cancel scan.\n");
3451 IWL_DEBUG_INFO(priv
, "Committing rxon.flags = 0x%04X\n",
3453 priv
->staging_rxon
.flags
= cpu_to_le32(flags
);
3454 iwlcore_commit_rxon(priv
);
3457 mutex_unlock(&priv
->mutex
);
3462 static DEVICE_ATTR(flags
, S_IWUSR
| S_IRUGO
, show_flags
, store_flags
);
3464 static ssize_t
show_filter_flags(struct device
*d
,
3465 struct device_attribute
*attr
, char *buf
)
3467 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3469 return sprintf(buf
, "0x%04X\n",
3470 le32_to_cpu(priv
->active_rxon
.filter_flags
));
3473 static ssize_t
store_filter_flags(struct device
*d
,
3474 struct device_attribute
*attr
,
3475 const char *buf
, size_t count
)
3477 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3478 u32 filter_flags
= simple_strtoul(buf
, NULL
, 0);
3480 mutex_lock(&priv
->mutex
);
3481 if (le32_to_cpu(priv
->staging_rxon
.filter_flags
) != filter_flags
) {
3482 /* Cancel any currently running scans... */
3483 if (iwl_scan_cancel_timeout(priv
, 100))
3484 IWL_WARN(priv
, "Could not cancel scan.\n");
3486 IWL_DEBUG_INFO(priv
, "Committing rxon.filter_flags = "
3487 "0x%04X\n", filter_flags
);
3488 priv
->staging_rxon
.filter_flags
=
3489 cpu_to_le32(filter_flags
);
3490 iwlcore_commit_rxon(priv
);
3493 mutex_unlock(&priv
->mutex
);
3498 static DEVICE_ATTR(filter_flags
, S_IWUSR
| S_IRUGO
, show_filter_flags
,
3499 store_filter_flags
);
3501 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
3503 static ssize_t
show_measurement(struct device
*d
,
3504 struct device_attribute
*attr
, char *buf
)
3506 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3507 struct iwl_spectrum_notification measure_report
;
3508 u32 size
= sizeof(measure_report
), len
= 0, ofs
= 0;
3509 u8
*data
= (u8
*)&measure_report
;
3510 unsigned long flags
;
3512 spin_lock_irqsave(&priv
->lock
, flags
);
3513 if (!(priv
->measurement_status
& MEASUREMENT_READY
)) {
3514 spin_unlock_irqrestore(&priv
->lock
, flags
);
3517 memcpy(&measure_report
, &priv
->measure_report
, size
);
3518 priv
->measurement_status
= 0;
3519 spin_unlock_irqrestore(&priv
->lock
, flags
);
3521 while (size
&& (PAGE_SIZE
- len
)) {
3522 hex_dump_to_buffer(data
+ ofs
, size
, 16, 1, buf
+ len
,
3523 PAGE_SIZE
- len
, 1);
3525 if (PAGE_SIZE
- len
)
3529 size
-= min(size
, 16U);
3535 static ssize_t
store_measurement(struct device
*d
,
3536 struct device_attribute
*attr
,
3537 const char *buf
, size_t count
)
3539 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3540 struct ieee80211_measurement_params params
= {
3541 .channel
= le16_to_cpu(priv
->active_rxon
.channel
),
3542 .start_time
= cpu_to_le64(priv
->last_tsf
),
3543 .duration
= cpu_to_le16(1),
3545 u8 type
= IWL_MEASURE_BASIC
;
3551 strncpy(buffer
, buf
, min(sizeof(buffer
), count
));
3552 channel
= simple_strtoul(p
, NULL
, 0);
3554 params
.channel
= channel
;
3557 while (*p
&& *p
!= ' ')
3560 type
= simple_strtoul(p
+ 1, NULL
, 0);
3563 IWL_DEBUG_INFO(priv
, "Invoking measurement of type %d on "
3564 "channel %d (for '%s')\n", type
, params
.channel
, buf
);
3565 iwl3945_get_measurement(priv
, ¶ms
, type
);
3570 static DEVICE_ATTR(measurement
, S_IRUSR
| S_IWUSR
,
3571 show_measurement
, store_measurement
);
3572 #endif /* CONFIG_IWL3945_SPECTRUM_MEASUREMENT */
3574 static ssize_t
store_retry_rate(struct device
*d
,
3575 struct device_attribute
*attr
,
3576 const char *buf
, size_t count
)
3578 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3580 priv
->retry_rate
= simple_strtoul(buf
, NULL
, 0);
3581 if (priv
->retry_rate
<= 0)
3582 priv
->retry_rate
= 1;
3587 static ssize_t
show_retry_rate(struct device
*d
,
3588 struct device_attribute
*attr
, char *buf
)
3590 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3591 return sprintf(buf
, "%d", priv
->retry_rate
);
3594 static DEVICE_ATTR(retry_rate
, S_IWUSR
| S_IRUSR
, show_retry_rate
,
3598 static ssize_t
show_channels(struct device
*d
,
3599 struct device_attribute
*attr
, char *buf
)
3601 /* all this shit doesn't belong into sysfs anyway */
3605 static DEVICE_ATTR(channels
, S_IRUSR
, show_channels
, NULL
);
3607 static ssize_t
show_statistics(struct device
*d
,
3608 struct device_attribute
*attr
, char *buf
)
3610 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3611 u32 size
= sizeof(struct iwl3945_notif_statistics
);
3612 u32 len
= 0, ofs
= 0;
3613 u8
*data
= (u8
*)&priv
->statistics_39
;
3616 if (!iwl_is_alive(priv
))
3619 mutex_lock(&priv
->mutex
);
3620 rc
= iwl_send_statistics_request(priv
, 0);
3621 mutex_unlock(&priv
->mutex
);
3625 "Error sending statistics request: 0x%08X\n", rc
);
3629 while (size
&& (PAGE_SIZE
- len
)) {
3630 hex_dump_to_buffer(data
+ ofs
, size
, 16, 1, buf
+ len
,
3631 PAGE_SIZE
- len
, 1);
3633 if (PAGE_SIZE
- len
)
3637 size
-= min(size
, 16U);
3643 static DEVICE_ATTR(statistics
, S_IRUGO
, show_statistics
, NULL
);
3645 static ssize_t
show_antenna(struct device
*d
,
3646 struct device_attribute
*attr
, char *buf
)
3648 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3650 if (!iwl_is_alive(priv
))
3653 return sprintf(buf
, "%d\n", iwl3945_mod_params
.antenna
);
3656 static ssize_t
store_antenna(struct device
*d
,
3657 struct device_attribute
*attr
,
3658 const char *buf
, size_t count
)
3660 struct iwl_priv
*priv __maybe_unused
= dev_get_drvdata(d
);
3666 if (sscanf(buf
, "%1i", &ant
) != 1) {
3667 IWL_DEBUG_INFO(priv
, "not in hex or decimal form.\n");
3671 if ((ant
>= 0) && (ant
<= 2)) {
3672 IWL_DEBUG_INFO(priv
, "Setting antenna select to %d.\n", ant
);
3673 iwl3945_mod_params
.antenna
= (enum iwl3945_antenna
)ant
;
3675 IWL_DEBUG_INFO(priv
, "Bad antenna select value %d.\n", ant
);
3681 static DEVICE_ATTR(antenna
, S_IWUSR
| S_IRUGO
, show_antenna
, store_antenna
);
3683 static ssize_t
show_status(struct device
*d
,
3684 struct device_attribute
*attr
, char *buf
)
3686 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3687 if (!iwl_is_alive(priv
))
3689 return sprintf(buf
, "0x%08x\n", (int)priv
->status
);
3692 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3694 static ssize_t
dump_error_log(struct device
*d
,
3695 struct device_attribute
*attr
,
3696 const char *buf
, size_t count
)
3698 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3699 char *p
= (char *)buf
;
3702 iwl3945_dump_nic_error_log(priv
);
3704 return strnlen(buf
, count
);
3707 static DEVICE_ATTR(dump_errors
, S_IWUSR
, NULL
, dump_error_log
);
3709 /*****************************************************************************
3711 * driver setup and tear down
3713 *****************************************************************************/
3715 static void iwl3945_setup_deferred_work(struct iwl_priv
*priv
)
3717 priv
->workqueue
= create_singlethread_workqueue(DRV_NAME
);
3719 init_waitqueue_head(&priv
->wait_command_queue
);
3721 INIT_WORK(&priv
->up
, iwl3945_bg_up
);
3722 INIT_WORK(&priv
->restart
, iwl3945_bg_restart
);
3723 INIT_WORK(&priv
->rx_replenish
, iwl3945_bg_rx_replenish
);
3724 INIT_WORK(&priv
->beacon_update
, iwl3945_bg_beacon_update
);
3725 INIT_DELAYED_WORK(&priv
->init_alive_start
, iwl3945_bg_init_alive_start
);
3726 INIT_DELAYED_WORK(&priv
->alive_start
, iwl3945_bg_alive_start
);
3727 INIT_DELAYED_WORK(&priv
->rfkill_poll
, iwl3945_rfkill_poll
);
3728 INIT_WORK(&priv
->scan_completed
, iwl_bg_scan_completed
);
3729 INIT_WORK(&priv
->request_scan
, iwl3945_bg_request_scan
);
3730 INIT_WORK(&priv
->abort_scan
, iwl_bg_abort_scan
);
3731 INIT_DELAYED_WORK(&priv
->scan_check
, iwl_bg_scan_check
);
3733 iwl3945_hw_setup_deferred_work(priv
);
3735 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
3736 iwl3945_irq_tasklet
, (unsigned long)priv
);
3739 static void iwl3945_cancel_deferred_work(struct iwl_priv
*priv
)
3741 iwl3945_hw_cancel_deferred_work(priv
);
3743 cancel_delayed_work_sync(&priv
->init_alive_start
);
3744 cancel_delayed_work(&priv
->scan_check
);
3745 cancel_delayed_work(&priv
->alive_start
);
3746 cancel_work_sync(&priv
->beacon_update
);
3749 static struct attribute
*iwl3945_sysfs_entries
[] = {
3750 &dev_attr_antenna
.attr
,
3751 &dev_attr_channels
.attr
,
3752 &dev_attr_dump_errors
.attr
,
3753 &dev_attr_flags
.attr
,
3754 &dev_attr_filter_flags
.attr
,
3755 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
3756 &dev_attr_measurement
.attr
,
3758 &dev_attr_retry_rate
.attr
,
3759 &dev_attr_statistics
.attr
,
3760 &dev_attr_status
.attr
,
3761 &dev_attr_temperature
.attr
,
3762 &dev_attr_tx_power
.attr
,
3763 #ifdef CONFIG_IWLWIFI_DEBUG
3764 &dev_attr_debug_level
.attr
,
3769 static struct attribute_group iwl3945_attribute_group
= {
3770 .name
= NULL
, /* put in device directory */
3771 .attrs
= iwl3945_sysfs_entries
,
3774 static struct ieee80211_ops iwl3945_hw_ops
= {
3775 .tx
= iwl3945_mac_tx
,
3776 .start
= iwl3945_mac_start
,
3777 .stop
= iwl3945_mac_stop
,
3778 .add_interface
= iwl_mac_add_interface
,
3779 .remove_interface
= iwl_mac_remove_interface
,
3780 .config
= iwl_mac_config
,
3781 .configure_filter
= iwl_configure_filter
,
3782 .set_key
= iwl3945_mac_set_key
,
3783 .get_tx_stats
= iwl_mac_get_tx_stats
,
3784 .conf_tx
= iwl_mac_conf_tx
,
3785 .reset_tsf
= iwl_mac_reset_tsf
,
3786 .bss_info_changed
= iwl_bss_info_changed
,
3787 .hw_scan
= iwl_mac_hw_scan
3790 static int iwl3945_init_drv(struct iwl_priv
*priv
)
3793 struct iwl3945_eeprom
*eeprom
= (struct iwl3945_eeprom
*)priv
->eeprom
;
3795 priv
->retry_rate
= 1;
3796 priv
->ibss_beacon
= NULL
;
3798 spin_lock_init(&priv
->lock
);
3799 spin_lock_init(&priv
->sta_lock
);
3800 spin_lock_init(&priv
->hcmd_lock
);
3802 INIT_LIST_HEAD(&priv
->free_frames
);
3804 mutex_init(&priv
->mutex
);
3806 /* Clear the driver's (not device's) station table */
3807 iwl_clear_stations_table(priv
);
3809 priv
->ieee_channels
= NULL
;
3810 priv
->ieee_rates
= NULL
;
3811 priv
->band
= IEEE80211_BAND_2GHZ
;
3813 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
3815 iwl_reset_qos(priv
);
3817 priv
->qos_data
.qos_active
= 0;
3818 priv
->qos_data
.qos_cap
.val
= 0;
3820 priv
->rates_mask
= IWL_RATES_MASK
;
3821 priv
->tx_power_user_lmt
= IWL_DEFAULT_TX_POWER
;
3823 if (eeprom
->version
< EEPROM_3945_EEPROM_VERSION
) {
3824 IWL_WARN(priv
, "Unsupported EEPROM version: 0x%04X\n",
3829 ret
= iwl_init_channel_map(priv
);
3831 IWL_ERR(priv
, "initializing regulatory failed: %d\n", ret
);
3835 /* Set up txpower settings in driver for all channels */
3836 if (iwl3945_txpower_set_from_eeprom(priv
)) {
3838 goto err_free_channel_map
;
3841 ret
= iwlcore_init_geos(priv
);
3843 IWL_ERR(priv
, "initializing geos failed: %d\n", ret
);
3844 goto err_free_channel_map
;
3846 iwl3945_init_hw_rates(priv
, priv
->ieee_rates
);
3850 err_free_channel_map
:
3851 iwl_free_channel_map(priv
);
3856 static int iwl3945_setup_mac(struct iwl_priv
*priv
)
3859 struct ieee80211_hw
*hw
= priv
->hw
;
3861 hw
->rate_control_algorithm
= "iwl-3945-rs";
3862 hw
->sta_data_size
= sizeof(struct iwl3945_sta_priv
);
3864 /* Tell mac80211 our characteristics */
3865 hw
->flags
= IEEE80211_HW_SIGNAL_DBM
|
3866 IEEE80211_HW_NOISE_DBM
|
3867 IEEE80211_HW_SPECTRUM_MGMT
|
3868 IEEE80211_HW_SUPPORTS_PS
|
3869 IEEE80211_HW_SUPPORTS_DYNAMIC_PS
;
3871 hw
->wiphy
->interface_modes
=
3872 BIT(NL80211_IFTYPE_STATION
) |
3873 BIT(NL80211_IFTYPE_ADHOC
);
3875 hw
->wiphy
->custom_regulatory
= true;
3877 /* Firmware does not support this */
3878 hw
->wiphy
->disable_beacon_hints
= true;
3880 hw
->wiphy
->max_scan_ssids
= PROBE_OPTION_MAX_3945
;
3881 /* we create the 802.11 header and a zero-length SSID element */
3882 hw
->wiphy
->max_scan_ie_len
= IWL_MAX_PROBE_REQUEST
- 24 - 2;
3884 /* Default value; 4 EDCA QOS priorities */
3887 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
)
3888 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
3889 &priv
->bands
[IEEE80211_BAND_2GHZ
];
3891 if (priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
)
3892 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
3893 &priv
->bands
[IEEE80211_BAND_5GHZ
];
3895 ret
= ieee80211_register_hw(priv
->hw
);
3897 IWL_ERR(priv
, "Failed to register hw (error %d)\n", ret
);
3900 priv
->mac80211_registered
= 1;
3905 static int iwl3945_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
3908 struct iwl_priv
*priv
;
3909 struct ieee80211_hw
*hw
;
3910 struct iwl_cfg
*cfg
= (struct iwl_cfg
*)(ent
->driver_data
);
3911 struct iwl3945_eeprom
*eeprom
;
3912 unsigned long flags
;
3914 /***********************
3915 * 1. Allocating HW data
3916 * ********************/
3918 /* mac80211 allocates memory for this device instance, including
3919 * space for this driver's private structure */
3920 hw
= iwl_alloc_all(cfg
, &iwl3945_hw_ops
);
3922 printk(KERN_ERR DRV_NAME
"Can not allocate network device\n");
3927 SET_IEEE80211_DEV(hw
, &pdev
->dev
);
3930 * Disabling hardware scan means that mac80211 will perform scans
3931 * "the hard way", rather than using device's scan.
3933 if (iwl3945_mod_params
.disable_hw_scan
) {
3934 IWL_DEBUG_INFO(priv
, "Disabling hw_scan\n");
3935 iwl3945_hw_ops
.hw_scan
= NULL
;
3939 IWL_DEBUG_INFO(priv
, "*** LOAD DRIVER ***\n");
3941 priv
->pci_dev
= pdev
;
3942 priv
->inta_mask
= CSR_INI_SET_MASK
;
3944 #ifdef CONFIG_IWLWIFI_DEBUG
3945 atomic_set(&priv
->restrict_refcnt
, 0);
3947 if (iwl_alloc_traffic_mem(priv
))
3948 IWL_ERR(priv
, "Not enough memory to generate traffic log\n");
3950 /***************************
3951 * 2. Initializing PCI bus
3952 * *************************/
3953 if (pci_enable_device(pdev
)) {
3955 goto out_ieee80211_free_hw
;
3958 pci_set_master(pdev
);
3960 err
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
3962 err
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
3964 IWL_WARN(priv
, "No suitable DMA available.\n");
3965 goto out_pci_disable_device
;
3968 pci_set_drvdata(pdev
, priv
);
3969 err
= pci_request_regions(pdev
, DRV_NAME
);
3971 goto out_pci_disable_device
;
3973 /***********************
3974 * 3. Read REV Register
3975 * ********************/
3976 priv
->hw_base
= pci_iomap(pdev
, 0, 0);
3977 if (!priv
->hw_base
) {
3979 goto out_pci_release_regions
;
3982 IWL_DEBUG_INFO(priv
, "pci_resource_len = 0x%08llx\n",
3983 (unsigned long long) pci_resource_len(pdev
, 0));
3984 IWL_DEBUG_INFO(priv
, "pci_resource_base = %p\n", priv
->hw_base
);
3986 /* We disable the RETRY_TIMEOUT register (0x41) to keep
3987 * PCI Tx retries from interfering with C3 CPU state */
3988 pci_write_config_byte(pdev
, 0x41, 0x00);
3990 /* this spin lock will be used in apm_ops.init and EEPROM access
3991 * we should init now
3993 spin_lock_init(&priv
->reg_lock
);
3996 err
= priv
->cfg
->ops
->lib
->apm_ops
.init(priv
);
3998 IWL_DEBUG_INFO(priv
, "Failed to init the card\n");
4002 /***********************
4004 * ********************/
4006 /* Read the EEPROM */
4007 err
= iwl_eeprom_init(priv
);
4009 IWL_ERR(priv
, "Unable to init EEPROM\n");
4012 /* MAC Address location in EEPROM same for 3945/4965 */
4013 eeprom
= (struct iwl3945_eeprom
*)priv
->eeprom
;
4014 memcpy(priv
->mac_addr
, eeprom
->mac_address
, ETH_ALEN
);
4015 IWL_DEBUG_INFO(priv
, "MAC address: %pM\n", priv
->mac_addr
);
4016 SET_IEEE80211_PERM_ADDR(priv
->hw
, priv
->mac_addr
);
4018 /***********************
4019 * 5. Setup HW Constants
4020 * ********************/
4021 /* Device-specific setup */
4022 if (iwl3945_hw_set_hw_params(priv
)) {
4023 IWL_ERR(priv
, "failed to set hw settings\n");
4024 goto out_eeprom_free
;
4027 /***********************
4029 * ********************/
4031 err
= iwl3945_init_drv(priv
);
4033 IWL_ERR(priv
, "initializing driver failed\n");
4034 goto out_unset_hw_params
;
4037 IWL_INFO(priv
, "Detected Intel Wireless WiFi Link %s\n",
4040 /***********************
4042 * ********************/
4044 spin_lock_irqsave(&priv
->lock
, flags
);
4045 iwl_disable_interrupts(priv
);
4046 spin_unlock_irqrestore(&priv
->lock
, flags
);
4048 pci_enable_msi(priv
->pci_dev
);
4050 err
= request_irq(priv
->pci_dev
->irq
, priv
->cfg
->ops
->lib
->isr
,
4051 IRQF_SHARED
, DRV_NAME
, priv
);
4053 IWL_ERR(priv
, "Error allocating IRQ %d\n", priv
->pci_dev
->irq
);
4054 goto out_disable_msi
;
4057 err
= sysfs_create_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
4059 IWL_ERR(priv
, "failed to create sysfs device attributes\n");
4060 goto out_release_irq
;
4063 iwl_set_rxon_channel(priv
,
4064 &priv
->bands
[IEEE80211_BAND_2GHZ
].channels
[5]);
4065 iwl3945_setup_deferred_work(priv
);
4066 iwl3945_setup_rx_handlers(priv
);
4067 iwl_power_initialize(priv
);
4069 /*********************************
4070 * 8. Setup and Register mac80211
4071 * *******************************/
4073 iwl_enable_interrupts(priv
);
4075 err
= iwl3945_setup_mac(priv
);
4077 goto out_remove_sysfs
;
4079 err
= iwl_dbgfs_register(priv
, DRV_NAME
);
4081 IWL_ERR(priv
, "failed to create debugfs files. Ignoring error: %d\n", err
);
4083 /* Start monitoring the killswitch */
4084 queue_delayed_work(priv
->workqueue
, &priv
->rfkill_poll
,
4090 destroy_workqueue(priv
->workqueue
);
4091 priv
->workqueue
= NULL
;
4092 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
4094 free_irq(priv
->pci_dev
->irq
, priv
);
4096 pci_disable_msi(priv
->pci_dev
);
4097 iwlcore_free_geos(priv
);
4098 iwl_free_channel_map(priv
);
4099 out_unset_hw_params
:
4100 iwl3945_unset_hw_params(priv
);
4102 iwl_eeprom_free(priv
);
4104 pci_iounmap(pdev
, priv
->hw_base
);
4105 out_pci_release_regions
:
4106 pci_release_regions(pdev
);
4107 out_pci_disable_device
:
4108 pci_set_drvdata(pdev
, NULL
);
4109 pci_disable_device(pdev
);
4110 out_ieee80211_free_hw
:
4111 iwl_free_traffic_mem(priv
);
4112 ieee80211_free_hw(priv
->hw
);
4117 static void __devexit
iwl3945_pci_remove(struct pci_dev
*pdev
)
4119 struct iwl_priv
*priv
= pci_get_drvdata(pdev
);
4120 unsigned long flags
;
4125 IWL_DEBUG_INFO(priv
, "*** UNLOAD DRIVER ***\n");
4127 iwl_dbgfs_unregister(priv
);
4129 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
4131 if (priv
->mac80211_registered
) {
4132 ieee80211_unregister_hw(priv
->hw
);
4133 priv
->mac80211_registered
= 0;
4138 /* make sure we flush any pending irq or
4139 * tasklet for the driver
4141 spin_lock_irqsave(&priv
->lock
, flags
);
4142 iwl_disable_interrupts(priv
);
4143 spin_unlock_irqrestore(&priv
->lock
, flags
);
4145 iwl_synchronize_irq(priv
);
4147 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
4149 cancel_delayed_work_sync(&priv
->rfkill_poll
);
4151 iwl3945_dealloc_ucode_pci(priv
);
4154 iwl3945_rx_queue_free(priv
, &priv
->rxq
);
4155 iwl3945_hw_txq_ctx_free(priv
);
4157 iwl3945_unset_hw_params(priv
);
4158 iwl_clear_stations_table(priv
);
4160 /*netif_stop_queue(dev); */
4161 flush_workqueue(priv
->workqueue
);
4163 /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
4164 * priv->workqueue... so we can't take down the workqueue
4166 destroy_workqueue(priv
->workqueue
);
4167 priv
->workqueue
= NULL
;
4168 iwl_free_traffic_mem(priv
);
4170 free_irq(pdev
->irq
, priv
);
4171 pci_disable_msi(pdev
);
4173 pci_iounmap(pdev
, priv
->hw_base
);
4174 pci_release_regions(pdev
);
4175 pci_disable_device(pdev
);
4176 pci_set_drvdata(pdev
, NULL
);
4178 iwl_free_channel_map(priv
);
4179 iwlcore_free_geos(priv
);
4181 if (priv
->ibss_beacon
)
4182 dev_kfree_skb(priv
->ibss_beacon
);
4184 ieee80211_free_hw(priv
->hw
);
4188 /*****************************************************************************
4190 * driver and module entry point
4192 *****************************************************************************/
4194 static struct pci_driver iwl3945_driver
= {
4196 .id_table
= iwl3945_hw_card_ids
,
4197 .probe
= iwl3945_pci_probe
,
4198 .remove
= __devexit_p(iwl3945_pci_remove
),
4200 .suspend
= iwl_pci_suspend
,
4201 .resume
= iwl_pci_resume
,
4205 static int __init
iwl3945_init(void)
4209 printk(KERN_INFO DRV_NAME
": " DRV_DESCRIPTION
", " DRV_VERSION
"\n");
4210 printk(KERN_INFO DRV_NAME
": " DRV_COPYRIGHT
"\n");
4212 ret
= iwl3945_rate_control_register();
4214 printk(KERN_ERR DRV_NAME
4215 "Unable to register rate control algorithm: %d\n", ret
);
4219 ret
= pci_register_driver(&iwl3945_driver
);
4221 printk(KERN_ERR DRV_NAME
"Unable to initialize PCI module\n");
4222 goto error_register
;
4228 iwl3945_rate_control_unregister();
4232 static void __exit
iwl3945_exit(void)
4234 pci_unregister_driver(&iwl3945_driver
);
4235 iwl3945_rate_control_unregister();
4238 MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX
));
4240 module_param_named(antenna
, iwl3945_mod_params
.antenna
, int, S_IRUGO
);
4241 MODULE_PARM_DESC(antenna
, "select antenna (1=Main, 2=Aux, default 0 [both])");
4242 module_param_named(swcrypto
, iwl3945_mod_params
.sw_crypto
, int, S_IRUGO
);
4243 MODULE_PARM_DESC(swcrypto
,
4244 "using software crypto (default 1 [software])\n");
4245 #ifdef CONFIG_IWLWIFI_DEBUG
4246 module_param_named(debug
, iwl_debug_level
, uint
, S_IRUGO
| S_IWUSR
);
4247 MODULE_PARM_DESC(debug
, "debug output mask");
4249 module_param_named(disable_hw_scan
, iwl3945_mod_params
.disable_hw_scan
,
4251 MODULE_PARM_DESC(disable_hw_scan
, "disable hardware scanning (default 0)");
4252 module_param_named(fw_restart3945
, iwl3945_mod_params
.restart_fw
, int, S_IRUGO
);
4253 MODULE_PARM_DESC(fw_restart3945
, "restart firmware in case of error");
4255 module_exit(iwl3945_exit
);
4256 module_init(iwl3945_init
);