3 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
5 * Extended 3 / 2005 by Hartmut Hackmann to support various
6 * cards with the tda10046 DVB-T channel decoder
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 #include <linux/init.h>
24 #include <linux/list.h>
25 #include <linux/module.h>
26 #include <linux/kernel.h>
27 #include <linux/delay.h>
28 #include <linux/kthread.h>
29 #include <linux/suspend.h>
31 #include "saa7134-reg.h"
33 #include <media/v4l2-common.h>
35 #include <dvb_frontend.h>
38 #include "mt352_priv.h" /* FIXME */
41 #include "tuner-xc2028.h"
50 #include "tuner-simple.h"
63 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
64 MODULE_LICENSE("GPL");
66 static unsigned int antenna_pwr
;
68 module_param(antenna_pwr
, int, 0444);
69 MODULE_PARM_DESC(antenna_pwr
,"enable antenna power (Pinnacle 300i)");
71 static int use_frontend
;
72 module_param(use_frontend
, int, 0644);
73 MODULE_PARM_DESC(use_frontend
,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
76 module_param(debug
, int, 0644);
77 MODULE_PARM_DESC(debug
, "Turn on/off module debugging (default:off).");
79 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr
);
81 #define dprintk(fmt, arg...) do { if (debug) \
82 printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0)
85 #define wprintk(fmt, arg...) \
86 printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg)
88 /* ------------------------------------------------------------------
89 * mt352 based DVB-T cards
92 static int pinnacle_antenna_pwr(struct saa7134_dev
*dev
, int on
)
97 saa_setl(SAA7134_GPIO_GPMODE0
>> 2, (1 << 26));
98 saa_clearl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 26));
102 saa_setl(SAA7134_GPIO_GPMODE0
>> 2, (1 << 26));
103 saa_setl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 26));
106 saa_setl(SAA7134_GPIO_GPMODE0
>> 2, (1 << 28));
107 saa_clearl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 28));
109 saa_setl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 28));
111 ok
= saa_readl(SAA7134_GPIO_GPSTATUS0
) & (1 << 27);
112 dprintk("%s %s\n", __func__
, ok
? "on" : "off");
115 saa_clearl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 26));
119 static int mt352_pinnacle_init(struct dvb_frontend
* fe
)
121 static u8 clock_config
[] = { CLOCK_CTL
, 0x3d, 0x28 };
122 static u8 reset
[] = { RESET
, 0x80 };
123 static u8 adc_ctl_1_cfg
[] = { ADC_CTL_1
, 0x40 };
124 static u8 agc_cfg
[] = { AGC_TARGET
, 0x28, 0xa0 };
125 static u8 capt_range_cfg
[] = { CAPT_RANGE
, 0x31 };
126 static u8 fsm_ctl_cfg
[] = { 0x7b, 0x04 };
127 static u8 gpp_ctl_cfg
[] = { GPP_CTL
, 0x0f };
128 static u8 scan_ctl_cfg
[] = { SCAN_CTL
, 0x0d };
129 static u8 irq_cfg
[] = { INTERRUPT_EN_0
, 0x00, 0x00, 0x00, 0x00 };
130 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
132 dprintk("%s called\n", __func__
);
134 mt352_write(fe
, clock_config
, sizeof(clock_config
));
136 mt352_write(fe
, reset
, sizeof(reset
));
137 mt352_write(fe
, adc_ctl_1_cfg
, sizeof(adc_ctl_1_cfg
));
138 mt352_write(fe
, agc_cfg
, sizeof(agc_cfg
));
139 mt352_write(fe
, capt_range_cfg
, sizeof(capt_range_cfg
));
140 mt352_write(fe
, gpp_ctl_cfg
, sizeof(gpp_ctl_cfg
));
142 mt352_write(fe
, fsm_ctl_cfg
, sizeof(fsm_ctl_cfg
));
143 mt352_write(fe
, scan_ctl_cfg
, sizeof(scan_ctl_cfg
));
144 mt352_write(fe
, irq_cfg
, sizeof(irq_cfg
));
149 static int mt352_aver777_init(struct dvb_frontend
* fe
)
151 static u8 clock_config
[] = { CLOCK_CTL
, 0x38, 0x2d };
152 static u8 reset
[] = { RESET
, 0x80 };
153 static u8 adc_ctl_1_cfg
[] = { ADC_CTL_1
, 0x40 };
154 static u8 agc_cfg
[] = { AGC_TARGET
, 0x28, 0xa0 };
155 static u8 capt_range_cfg
[] = { CAPT_RANGE
, 0x33 };
157 mt352_write(fe
, clock_config
, sizeof(clock_config
));
159 mt352_write(fe
, reset
, sizeof(reset
));
160 mt352_write(fe
, adc_ctl_1_cfg
, sizeof(adc_ctl_1_cfg
));
161 mt352_write(fe
, agc_cfg
, sizeof(agc_cfg
));
162 mt352_write(fe
, capt_range_cfg
, sizeof(capt_range_cfg
));
167 static int mt352_avermedia_xc3028_init(struct dvb_frontend
*fe
)
169 static u8 clock_config
[] = { CLOCK_CTL
, 0x38, 0x2d };
170 static u8 reset
[] = { RESET
, 0x80 };
171 static u8 adc_ctl_1_cfg
[] = { ADC_CTL_1
, 0x40 };
172 static u8 agc_cfg
[] = { AGC_TARGET
, 0xe };
173 static u8 capt_range_cfg
[] = { CAPT_RANGE
, 0x33 };
175 mt352_write(fe
, clock_config
, sizeof(clock_config
));
177 mt352_write(fe
, reset
, sizeof(reset
));
178 mt352_write(fe
, adc_ctl_1_cfg
, sizeof(adc_ctl_1_cfg
));
179 mt352_write(fe
, agc_cfg
, sizeof(agc_cfg
));
180 mt352_write(fe
, capt_range_cfg
, sizeof(capt_range_cfg
));
184 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend
* fe
,
185 struct dvb_frontend_parameters
* params
)
187 u8 off
[] = { 0x00, 0xf1};
188 u8 on
[] = { 0x00, 0x71};
189 struct i2c_msg msg
= {.addr
=0x43, .flags
=0, .buf
=off
, .len
= sizeof(off
)};
191 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
192 struct v4l2_frequency f
;
194 /* set frequency (mt2050) */
196 f
.type
= V4L2_TUNER_DIGITAL_TV
;
197 f
.frequency
= params
->frequency
/ 1000 * 16 / 1000;
198 if (fe
->ops
.i2c_gate_ctrl
)
199 fe
->ops
.i2c_gate_ctrl(fe
, 1);
200 i2c_transfer(&dev
->i2c_adap
, &msg
, 1);
201 saa_call_all(dev
, tuner
, s_frequency
, &f
);
203 if (fe
->ops
.i2c_gate_ctrl
)
204 fe
->ops
.i2c_gate_ctrl(fe
, 1);
205 i2c_transfer(&dev
->i2c_adap
, &msg
, 1);
207 pinnacle_antenna_pwr(dev
, antenna_pwr
);
210 return mt352_pinnacle_init(fe
);
213 static struct mt352_config pinnacle_300i
= {
214 .demod_address
= 0x3c >> 1,
218 .demod_init
= mt352_pinnacle_init
,
221 static struct mt352_config avermedia_777
= {
222 .demod_address
= 0xf,
223 .demod_init
= mt352_aver777_init
,
226 static struct mt352_config avermedia_xc3028_mt352_dev
= {
227 .demod_address
= (0x1e >> 1),
229 .demod_init
= mt352_avermedia_xc3028_init
,
232 static struct tda18271_std_map mb86a20s_tda18271_std_map
= {
233 .dvbt_6
= { .if_freq
= 3300, .agc_mode
= 3, .std
= 4,
234 .if_lvl
= 7, .rfagc_top
= 0x37, },
237 static struct tda18271_config kworld_tda18271_config
= {
238 .std_map
= &mb86a20s_tda18271_std_map
,
239 .gate
= TDA18271_GATE_ANALOG
,
242 static const struct mb86a20s_config kworld_mb86a20s_config
= {
243 .demod_address
= 0x10,
246 /* ==================================================================
247 * tda1004x based DVB-T cards, helper functions
250 static int philips_tda1004x_request_firmware(struct dvb_frontend
*fe
,
251 const struct firmware
**fw
, char *name
)
253 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
254 return request_firmware(fw
, name
, &dev
->pci
->dev
);
257 /* ------------------------------------------------------------------
258 * these tuners are tu1216, td1316(a)
261 static int philips_tda6651_pll_set(struct dvb_frontend
*fe
, struct dvb_frontend_parameters
*params
)
263 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
264 struct tda1004x_state
*state
= fe
->demodulator_priv
;
265 u8 addr
= state
->config
->tuner_address
;
267 struct i2c_msg tuner_msg
= {.addr
= addr
,.flags
= 0,.buf
= tuner_buf
,.len
=
269 int tuner_frequency
= 0;
272 /* determine charge pump */
273 tuner_frequency
= params
->frequency
+ 36166000;
274 if (tuner_frequency
< 87000000)
276 else if (tuner_frequency
< 130000000)
278 else if (tuner_frequency
< 160000000)
280 else if (tuner_frequency
< 200000000)
282 else if (tuner_frequency
< 290000000)
284 else if (tuner_frequency
< 420000000)
286 else if (tuner_frequency
< 480000000)
288 else if (tuner_frequency
< 620000000)
290 else if (tuner_frequency
< 830000000)
292 else if (tuner_frequency
< 895000000)
298 if (params
->frequency
< 49000000)
300 else if (params
->frequency
< 161000000)
302 else if (params
->frequency
< 444000000)
304 else if (params
->frequency
< 861000000)
309 /* setup PLL filter */
310 switch (params
->u
.ofdm
.bandwidth
) {
311 case BANDWIDTH_6_MHZ
:
315 case BANDWIDTH_7_MHZ
:
319 case BANDWIDTH_8_MHZ
:
328 * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
330 tuner_frequency
= (((params
->frequency
/ 1000) * 6) + 217496) / 1000;
332 /* setup tuner buffer */
333 tuner_buf
[0] = (tuner_frequency
>> 8) & 0x7f;
334 tuner_buf
[1] = tuner_frequency
& 0xff;
336 tuner_buf
[3] = (cp
<< 5) | (filter
<< 3) | band
;
338 if (fe
->ops
.i2c_gate_ctrl
)
339 fe
->ops
.i2c_gate_ctrl(fe
, 1);
340 if (i2c_transfer(&dev
->i2c_adap
, &tuner_msg
, 1) != 1) {
341 wprintk("could not write to tuner at addr: 0x%02x\n",
349 static int philips_tu1216_init(struct dvb_frontend
*fe
)
351 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
352 struct tda1004x_state
*state
= fe
->demodulator_priv
;
353 u8 addr
= state
->config
->tuner_address
;
354 static u8 tu1216_init
[] = { 0x0b, 0xf5, 0x85, 0xab };
355 struct i2c_msg tuner_msg
= {.addr
= addr
,.flags
= 0,.buf
= tu1216_init
,.len
= sizeof(tu1216_init
) };
357 /* setup PLL configuration */
358 if (fe
->ops
.i2c_gate_ctrl
)
359 fe
->ops
.i2c_gate_ctrl(fe
, 1);
360 if (i2c_transfer(&dev
->i2c_adap
, &tuner_msg
, 1) != 1)
367 /* ------------------------------------------------------------------ */
369 static struct tda1004x_config philips_tu1216_60_config
= {
370 .demod_address
= 0x8,
373 .xtal_freq
= TDA10046_XTAL_4M
,
374 .agc_config
= TDA10046_AGC_DEFAULT
,
375 .if_freq
= TDA10046_FREQ_3617
,
376 .tuner_address
= 0x60,
377 .request_firmware
= philips_tda1004x_request_firmware
380 static struct tda1004x_config philips_tu1216_61_config
= {
382 .demod_address
= 0x8,
385 .xtal_freq
= TDA10046_XTAL_4M
,
386 .agc_config
= TDA10046_AGC_DEFAULT
,
387 .if_freq
= TDA10046_FREQ_3617
,
388 .tuner_address
= 0x61,
389 .request_firmware
= philips_tda1004x_request_firmware
392 /* ------------------------------------------------------------------ */
394 static int philips_td1316_tuner_init(struct dvb_frontend
*fe
)
396 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
397 struct tda1004x_state
*state
= fe
->demodulator_priv
;
398 u8 addr
= state
->config
->tuner_address
;
399 static u8 msg
[] = { 0x0b, 0xf5, 0x86, 0xab };
400 struct i2c_msg init_msg
= {.addr
= addr
,.flags
= 0,.buf
= msg
,.len
= sizeof(msg
) };
402 /* setup PLL configuration */
403 if (fe
->ops
.i2c_gate_ctrl
)
404 fe
->ops
.i2c_gate_ctrl(fe
, 1);
405 if (i2c_transfer(&dev
->i2c_adap
, &init_msg
, 1) != 1)
410 static int philips_td1316_tuner_set_params(struct dvb_frontend
*fe
, struct dvb_frontend_parameters
*params
)
412 return philips_tda6651_pll_set(fe
, params
);
415 static int philips_td1316_tuner_sleep(struct dvb_frontend
*fe
)
417 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
418 struct tda1004x_state
*state
= fe
->demodulator_priv
;
419 u8 addr
= state
->config
->tuner_address
;
420 static u8 msg
[] = { 0x0b, 0xdc, 0x86, 0xa4 };
421 struct i2c_msg analog_msg
= {.addr
= addr
,.flags
= 0,.buf
= msg
,.len
= sizeof(msg
) };
423 /* switch the tuner to analog mode */
424 if (fe
->ops
.i2c_gate_ctrl
)
425 fe
->ops
.i2c_gate_ctrl(fe
, 1);
426 if (i2c_transfer(&dev
->i2c_adap
, &analog_msg
, 1) != 1)
431 /* ------------------------------------------------------------------ */
433 static int philips_europa_tuner_init(struct dvb_frontend
*fe
)
435 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
436 static u8 msg
[] = { 0x00, 0x40};
437 struct i2c_msg init_msg
= {.addr
= 0x43,.flags
= 0,.buf
= msg
,.len
= sizeof(msg
) };
440 if (philips_td1316_tuner_init(fe
))
443 if (i2c_transfer(&dev
->i2c_adap
, &init_msg
, 1) != 1)
449 static int philips_europa_tuner_sleep(struct dvb_frontend
*fe
)
451 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
453 static u8 msg
[] = { 0x00, 0x14 };
454 struct i2c_msg analog_msg
= {.addr
= 0x43,.flags
= 0,.buf
= msg
,.len
= sizeof(msg
) };
456 if (philips_td1316_tuner_sleep(fe
))
459 /* switch the board to analog mode */
460 if (fe
->ops
.i2c_gate_ctrl
)
461 fe
->ops
.i2c_gate_ctrl(fe
, 1);
462 i2c_transfer(&dev
->i2c_adap
, &analog_msg
, 1);
466 static int philips_europa_demod_sleep(struct dvb_frontend
*fe
)
468 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
470 if (dev
->original_demod_sleep
)
471 dev
->original_demod_sleep(fe
);
472 fe
->ops
.i2c_gate_ctrl(fe
, 1);
476 static struct tda1004x_config philips_europa_config
= {
478 .demod_address
= 0x8,
481 .xtal_freq
= TDA10046_XTAL_4M
,
482 .agc_config
= TDA10046_AGC_IFO_AUTO_POS
,
483 .if_freq
= TDA10046_FREQ_052
,
484 .tuner_address
= 0x61,
485 .request_firmware
= philips_tda1004x_request_firmware
488 static struct tda1004x_config medion_cardbus
= {
489 .demod_address
= 0x08,
492 .xtal_freq
= TDA10046_XTAL_16M
,
493 .agc_config
= TDA10046_AGC_IFO_AUTO_NEG
,
494 .if_freq
= TDA10046_FREQ_3613
,
495 .tuner_address
= 0x61,
496 .request_firmware
= philips_tda1004x_request_firmware
499 static struct tda1004x_config technotrend_budget_t3000_config
= {
500 .demod_address
= 0x8,
503 .xtal_freq
= TDA10046_XTAL_4M
,
504 .agc_config
= TDA10046_AGC_DEFAULT
,
505 .if_freq
= TDA10046_FREQ_3617
,
506 .tuner_address
= 0x63,
507 .request_firmware
= philips_tda1004x_request_firmware
510 /* ------------------------------------------------------------------
511 * tda 1004x based cards with philips silicon tuner
514 static int tda8290_i2c_gate_ctrl( struct dvb_frontend
* fe
, int enable
)
516 struct tda1004x_state
*state
= fe
->demodulator_priv
;
518 u8 addr
= state
->config
->i2c_gate
;
519 static u8 tda8290_close
[] = { 0x21, 0xc0};
520 static u8 tda8290_open
[] = { 0x21, 0x80};
521 struct i2c_msg tda8290_msg
= {.addr
= addr
,.flags
= 0, .len
= 2};
523 tda8290_msg
.buf
= tda8290_close
;
525 tda8290_msg
.buf
= tda8290_open
;
527 if (i2c_transfer(state
->i2c
, &tda8290_msg
, 1) != 1) {
528 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
529 wprintk("could not access tda8290 I2C gate\n");
536 static int philips_tda827x_tuner_init(struct dvb_frontend
*fe
)
538 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
539 struct tda1004x_state
*state
= fe
->demodulator_priv
;
541 switch (state
->config
->antenna_switch
) {
543 case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
544 saa7134_set_gpio(dev
, 21, 0);
546 case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
547 saa7134_set_gpio(dev
, 21, 1);
553 static int philips_tda827x_tuner_sleep(struct dvb_frontend
*fe
)
555 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
556 struct tda1004x_state
*state
= fe
->demodulator_priv
;
558 switch (state
->config
->antenna_switch
) {
560 case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
561 saa7134_set_gpio(dev
, 21, 1);
563 case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
564 saa7134_set_gpio(dev
, 21, 0);
570 static int configure_tda827x_fe(struct saa7134_dev
*dev
,
571 struct tda1004x_config
*cdec_conf
,
572 struct tda827x_config
*tuner_conf
)
574 struct videobuf_dvb_frontend
*fe0
;
576 /* Get the first frontend */
577 fe0
= videobuf_dvb_get_frontend(&dev
->frontends
, 1);
579 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
, cdec_conf
, &dev
->i2c_adap
);
580 if (fe0
->dvb
.frontend
) {
581 if (cdec_conf
->i2c_gate
)
582 fe0
->dvb
.frontend
->ops
.i2c_gate_ctrl
= tda8290_i2c_gate_ctrl
;
583 if (dvb_attach(tda827x_attach
, fe0
->dvb
.frontend
,
584 cdec_conf
->tuner_address
,
585 &dev
->i2c_adap
, tuner_conf
))
588 wprintk("no tda827x tuner found at addr: %02x\n",
589 cdec_conf
->tuner_address
);
594 /* ------------------------------------------------------------------ */
596 static struct tda827x_config tda827x_cfg_0
= {
597 .init
= philips_tda827x_tuner_init
,
598 .sleep
= philips_tda827x_tuner_sleep
,
603 static struct tda827x_config tda827x_cfg_1
= {
604 .init
= philips_tda827x_tuner_init
,
605 .sleep
= philips_tda827x_tuner_sleep
,
610 static struct tda827x_config tda827x_cfg_2
= {
611 .init
= philips_tda827x_tuner_init
,
612 .sleep
= philips_tda827x_tuner_sleep
,
617 static struct tda827x_config tda827x_cfg_2_sw42
= {
618 .init
= philips_tda827x_tuner_init
,
619 .sleep
= philips_tda827x_tuner_sleep
,
624 /* ------------------------------------------------------------------ */
626 static struct tda1004x_config tda827x_lifeview_config
= {
627 .demod_address
= 0x08,
630 .xtal_freq
= TDA10046_XTAL_16M
,
631 .agc_config
= TDA10046_AGC_TDA827X
,
632 .gpio_config
= TDA10046_GP11_I
,
633 .if_freq
= TDA10046_FREQ_045
,
634 .tuner_address
= 0x60,
635 .request_firmware
= philips_tda1004x_request_firmware
638 static struct tda1004x_config philips_tiger_config
= {
639 .demod_address
= 0x08,
642 .xtal_freq
= TDA10046_XTAL_16M
,
643 .agc_config
= TDA10046_AGC_TDA827X
,
644 .gpio_config
= TDA10046_GP11_I
,
645 .if_freq
= TDA10046_FREQ_045
,
647 .tuner_address
= 0x61,
649 .request_firmware
= philips_tda1004x_request_firmware
652 static struct tda1004x_config cinergy_ht_config
= {
653 .demod_address
= 0x08,
656 .xtal_freq
= TDA10046_XTAL_16M
,
657 .agc_config
= TDA10046_AGC_TDA827X
,
658 .gpio_config
= TDA10046_GP01_I
,
659 .if_freq
= TDA10046_FREQ_045
,
661 .tuner_address
= 0x61,
662 .request_firmware
= philips_tda1004x_request_firmware
665 static struct tda1004x_config cinergy_ht_pci_config
= {
666 .demod_address
= 0x08,
669 .xtal_freq
= TDA10046_XTAL_16M
,
670 .agc_config
= TDA10046_AGC_TDA827X
,
671 .gpio_config
= TDA10046_GP01_I
,
672 .if_freq
= TDA10046_FREQ_045
,
674 .tuner_address
= 0x60,
675 .request_firmware
= philips_tda1004x_request_firmware
678 static struct tda1004x_config philips_tiger_s_config
= {
679 .demod_address
= 0x08,
682 .xtal_freq
= TDA10046_XTAL_16M
,
683 .agc_config
= TDA10046_AGC_TDA827X
,
684 .gpio_config
= TDA10046_GP01_I
,
685 .if_freq
= TDA10046_FREQ_045
,
687 .tuner_address
= 0x61,
689 .request_firmware
= philips_tda1004x_request_firmware
692 static struct tda1004x_config pinnacle_pctv_310i_config
= {
693 .demod_address
= 0x08,
696 .xtal_freq
= TDA10046_XTAL_16M
,
697 .agc_config
= TDA10046_AGC_TDA827X
,
698 .gpio_config
= TDA10046_GP11_I
,
699 .if_freq
= TDA10046_FREQ_045
,
701 .tuner_address
= 0x61,
702 .request_firmware
= philips_tda1004x_request_firmware
705 static struct tda1004x_config hauppauge_hvr_1110_config
= {
706 .demod_address
= 0x08,
709 .xtal_freq
= TDA10046_XTAL_16M
,
710 .agc_config
= TDA10046_AGC_TDA827X
,
711 .gpio_config
= TDA10046_GP11_I
,
712 .if_freq
= TDA10046_FREQ_045
,
714 .tuner_address
= 0x61,
715 .request_firmware
= philips_tda1004x_request_firmware
718 static struct tda1004x_config asus_p7131_dual_config
= {
719 .demod_address
= 0x08,
722 .xtal_freq
= TDA10046_XTAL_16M
,
723 .agc_config
= TDA10046_AGC_TDA827X
,
724 .gpio_config
= TDA10046_GP11_I
,
725 .if_freq
= TDA10046_FREQ_045
,
727 .tuner_address
= 0x61,
729 .request_firmware
= philips_tda1004x_request_firmware
732 static struct tda1004x_config lifeview_trio_config
= {
733 .demod_address
= 0x09,
736 .xtal_freq
= TDA10046_XTAL_16M
,
737 .agc_config
= TDA10046_AGC_TDA827X
,
738 .gpio_config
= TDA10046_GP00_I
,
739 .if_freq
= TDA10046_FREQ_045
,
740 .tuner_address
= 0x60,
741 .request_firmware
= philips_tda1004x_request_firmware
744 static struct tda1004x_config tevion_dvbt220rf_config
= {
745 .demod_address
= 0x08,
748 .xtal_freq
= TDA10046_XTAL_16M
,
749 .agc_config
= TDA10046_AGC_TDA827X
,
750 .gpio_config
= TDA10046_GP11_I
,
751 .if_freq
= TDA10046_FREQ_045
,
752 .tuner_address
= 0x60,
753 .request_firmware
= philips_tda1004x_request_firmware
756 static struct tda1004x_config md8800_dvbt_config
= {
757 .demod_address
= 0x08,
760 .xtal_freq
= TDA10046_XTAL_16M
,
761 .agc_config
= TDA10046_AGC_TDA827X
,
762 .gpio_config
= TDA10046_GP01_I
,
763 .if_freq
= TDA10046_FREQ_045
,
765 .tuner_address
= 0x60,
766 .request_firmware
= philips_tda1004x_request_firmware
769 static struct tda1004x_config asus_p7131_4871_config
= {
770 .demod_address
= 0x08,
773 .xtal_freq
= TDA10046_XTAL_16M
,
774 .agc_config
= TDA10046_AGC_TDA827X
,
775 .gpio_config
= TDA10046_GP01_I
,
776 .if_freq
= TDA10046_FREQ_045
,
778 .tuner_address
= 0x61,
780 .request_firmware
= philips_tda1004x_request_firmware
783 static struct tda1004x_config asus_p7131_hybrid_lna_config
= {
784 .demod_address
= 0x08,
787 .xtal_freq
= TDA10046_XTAL_16M
,
788 .agc_config
= TDA10046_AGC_TDA827X
,
789 .gpio_config
= TDA10046_GP11_I
,
790 .if_freq
= TDA10046_FREQ_045
,
792 .tuner_address
= 0x61,
794 .request_firmware
= philips_tda1004x_request_firmware
797 static struct tda1004x_config kworld_dvb_t_210_config
= {
798 .demod_address
= 0x08,
801 .xtal_freq
= TDA10046_XTAL_16M
,
802 .agc_config
= TDA10046_AGC_TDA827X
,
803 .gpio_config
= TDA10046_GP11_I
,
804 .if_freq
= TDA10046_FREQ_045
,
806 .tuner_address
= 0x61,
808 .request_firmware
= philips_tda1004x_request_firmware
811 static struct tda1004x_config avermedia_super_007_config
= {
812 .demod_address
= 0x08,
815 .xtal_freq
= TDA10046_XTAL_16M
,
816 .agc_config
= TDA10046_AGC_TDA827X
,
817 .gpio_config
= TDA10046_GP01_I
,
818 .if_freq
= TDA10046_FREQ_045
,
820 .tuner_address
= 0x60,
822 .request_firmware
= philips_tda1004x_request_firmware
825 static struct tda1004x_config twinhan_dtv_dvb_3056_config
= {
826 .demod_address
= 0x08,
829 .xtal_freq
= TDA10046_XTAL_16M
,
830 .agc_config
= TDA10046_AGC_TDA827X
,
831 .gpio_config
= TDA10046_GP01_I
,
832 .if_freq
= TDA10046_FREQ_045
,
834 .tuner_address
= 0x61,
836 .request_firmware
= philips_tda1004x_request_firmware
839 static struct tda1004x_config asus_tiger_3in1_config
= {
840 .demod_address
= 0x0b,
843 .xtal_freq
= TDA10046_XTAL_16M
,
844 .agc_config
= TDA10046_AGC_TDA827X
,
845 .gpio_config
= TDA10046_GP11_I
,
846 .if_freq
= TDA10046_FREQ_045
,
848 .tuner_address
= 0x61,
850 .request_firmware
= philips_tda1004x_request_firmware
853 /* ------------------------------------------------------------------
854 * special case: this card uses saa713x GPIO22 for the mode switch
857 static int ads_duo_tuner_init(struct dvb_frontend
*fe
)
859 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
860 philips_tda827x_tuner_init(fe
);
861 /* route TDA8275a AGC input to the channel decoder */
862 saa7134_set_gpio(dev
, 22, 1);
866 static int ads_duo_tuner_sleep(struct dvb_frontend
*fe
)
868 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
869 /* route TDA8275a AGC input to the analog IF chip*/
870 saa7134_set_gpio(dev
, 22, 0);
871 philips_tda827x_tuner_sleep(fe
);
875 static struct tda827x_config ads_duo_cfg
= {
876 .init
= ads_duo_tuner_init
,
877 .sleep
= ads_duo_tuner_sleep
,
881 static struct tda1004x_config ads_tech_duo_config
= {
882 .demod_address
= 0x08,
885 .xtal_freq
= TDA10046_XTAL_16M
,
886 .agc_config
= TDA10046_AGC_TDA827X
,
887 .gpio_config
= TDA10046_GP00_I
,
888 .if_freq
= TDA10046_FREQ_045
,
889 .tuner_address
= 0x61,
890 .request_firmware
= philips_tda1004x_request_firmware
893 static struct zl10353_config behold_h6_config
= {
894 .demod_address
= 0x1e>>1,
897 .disable_i2c_gate_ctrl
= 1,
900 static struct xc5000_config behold_x7_tunerconfig
= {
901 .i2c_address
= 0xc2>>1,
903 .radio_input
= XC5000_RADIO_FM1
,
906 static struct zl10353_config behold_x7_config
= {
907 .demod_address
= 0x1e>>1,
911 .disable_i2c_gate_ctrl
= 1,
914 /* ==================================================================
915 * tda10086 based DVB-S cards, helper functions
918 static struct tda10086_config flydvbs
= {
919 .demod_address
= 0x0e,
922 .xtal_freq
= TDA10086_XTAL_16M
,
925 static struct tda10086_config sd1878_4m
= {
926 .demod_address
= 0x0e,
929 .xtal_freq
= TDA10086_XTAL_4M
,
932 /* ------------------------------------------------------------------
933 * special case: lnb supply is connected to the gated i2c
936 static int md8800_set_voltage(struct dvb_frontend
*fe
, fe_sec_voltage_t voltage
)
939 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
940 if (fe
->ops
.i2c_gate_ctrl
) {
941 fe
->ops
.i2c_gate_ctrl(fe
, 1);
942 if (dev
->original_set_voltage
)
943 res
= dev
->original_set_voltage(fe
, voltage
);
944 fe
->ops
.i2c_gate_ctrl(fe
, 0);
949 static int md8800_set_high_voltage(struct dvb_frontend
*fe
, long arg
)
952 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
953 if (fe
->ops
.i2c_gate_ctrl
) {
954 fe
->ops
.i2c_gate_ctrl(fe
, 1);
955 if (dev
->original_set_high_voltage
)
956 res
= dev
->original_set_high_voltage(fe
, arg
);
957 fe
->ops
.i2c_gate_ctrl(fe
, 0);
962 static int md8800_set_voltage2(struct dvb_frontend
*fe
, fe_sec_voltage_t voltage
)
964 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
965 u8 wbuf
[2] = { 0x1f, 00 };
967 struct i2c_msg msg
[] = { { .addr
= 0x08, .flags
= 0, .buf
= wbuf
, .len
= 1 },
968 { .addr
= 0x08, .flags
= I2C_M_RD
, .buf
= &rbuf
, .len
= 1 } };
970 if (i2c_transfer(&dev
->i2c_adap
, msg
, 2) != 2)
972 /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */
973 if (voltage
== SEC_VOLTAGE_18
)
974 wbuf
[1] = rbuf
| 0x10;
976 wbuf
[1] = rbuf
& 0xef;
978 i2c_transfer(&dev
->i2c_adap
, msg
, 1);
982 static int md8800_set_high_voltage2(struct dvb_frontend
*fe
, long arg
)
984 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
985 wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__
);
989 /* ==================================================================
990 * nxt200x based ATSC cards, helper functions
993 static struct nxt200x_config avertvhda180
= {
994 .demod_address
= 0x0a,
997 static struct nxt200x_config kworldatsc110
= {
998 .demod_address
= 0x0a,
1001 /* ------------------------------------------------------------------ */
1003 static struct mt312_config avertv_a700_mt312
= {
1004 .demod_address
= 0x0e,
1005 .voltage_inverted
= 1,
1008 static struct zl10036_config avertv_a700_tuner
= {
1009 .tuner_address
= 0x60,
1012 static struct mt312_config zl10313_compro_s350_config
= {
1013 .demod_address
= 0x0e,
1016 static struct lgdt3305_config hcw_lgdt3305_config
= {
1018 .mpeg_mode
= LGDT3305_MPEG_SERIAL
,
1019 .tpclk_edge
= LGDT3305_TPCLK_RISING_EDGE
,
1020 .tpvalid_polarity
= LGDT3305_TP_VALID_HIGH
,
1022 .spectral_inversion
= 1,
1027 static struct tda10048_config hcw_tda10048_config
= {
1028 .demod_address
= 0x10 >> 1,
1029 .output_mode
= TDA10048_SERIAL_OUTPUT
,
1030 .fwbulkwritelen
= TDA10048_BULKWRITE_200
,
1031 .inversion
= TDA10048_INVERSION_ON
,
1032 .dtv6_if_freq_khz
= TDA10048_IF_3300
,
1033 .dtv7_if_freq_khz
= TDA10048_IF_3500
,
1034 .dtv8_if_freq_khz
= TDA10048_IF_4000
,
1035 .clk_freq_khz
= TDA10048_CLK_16000
,
1036 .disable_gate_access
= 1,
1039 static struct tda18271_std_map hauppauge_tda18271_std_map
= {
1040 .atsc_6
= { .if_freq
= 3250, .agc_mode
= 3, .std
= 4,
1041 .if_lvl
= 1, .rfagc_top
= 0x58, },
1042 .qam_6
= { .if_freq
= 4000, .agc_mode
= 3, .std
= 5,
1043 .if_lvl
= 1, .rfagc_top
= 0x58, },
1046 static struct tda18271_config hcw_tda18271_config
= {
1047 .std_map
= &hauppauge_tda18271_std_map
,
1048 .gate
= TDA18271_GATE_ANALOG
,
1050 .output_opt
= TDA18271_OUTPUT_LT_OFF
,
1053 static struct tda829x_config tda829x_no_probe
= {
1054 .probe_tuner
= TDA829X_DONT_PROBE
,
1057 static struct tda10048_config zolid_tda10048_config
= {
1058 .demod_address
= 0x10 >> 1,
1059 .output_mode
= TDA10048_PARALLEL_OUTPUT
,
1060 .fwbulkwritelen
= TDA10048_BULKWRITE_200
,
1061 .inversion
= TDA10048_INVERSION_ON
,
1062 .dtv6_if_freq_khz
= TDA10048_IF_3300
,
1063 .dtv7_if_freq_khz
= TDA10048_IF_3500
,
1064 .dtv8_if_freq_khz
= TDA10048_IF_4000
,
1065 .clk_freq_khz
= TDA10048_CLK_16000
,
1066 .disable_gate_access
= 1,
1069 static struct tda18271_config zolid_tda18271_config
= {
1070 .gate
= TDA18271_GATE_ANALOG
,
1073 static struct tda10048_config dtv1000s_tda10048_config
= {
1074 .demod_address
= 0x10 >> 1,
1075 .output_mode
= TDA10048_PARALLEL_OUTPUT
,
1076 .fwbulkwritelen
= TDA10048_BULKWRITE_200
,
1077 .inversion
= TDA10048_INVERSION_ON
,
1078 .dtv6_if_freq_khz
= TDA10048_IF_3300
,
1079 .dtv7_if_freq_khz
= TDA10048_IF_3800
,
1080 .dtv8_if_freq_khz
= TDA10048_IF_4300
,
1081 .clk_freq_khz
= TDA10048_CLK_16000
,
1082 .disable_gate_access
= 1,
1085 static struct tda18271_std_map dtv1000s_tda18271_std_map
= {
1086 .dvbt_6
= { .if_freq
= 3300, .agc_mode
= 3, .std
= 4,
1087 .if_lvl
= 1, .rfagc_top
= 0x37, },
1088 .dvbt_7
= { .if_freq
= 3800, .agc_mode
= 3, .std
= 5,
1089 .if_lvl
= 1, .rfagc_top
= 0x37, },
1090 .dvbt_8
= { .if_freq
= 4300, .agc_mode
= 3, .std
= 6,
1091 .if_lvl
= 1, .rfagc_top
= 0x37, },
1094 static struct tda18271_config dtv1000s_tda18271_config
= {
1095 .std_map
= &dtv1000s_tda18271_std_map
,
1096 .gate
= TDA18271_GATE_ANALOG
,
1099 /* ==================================================================
1103 static int dvb_init(struct saa7134_dev
*dev
)
1106 int attach_xc3028
= 0;
1107 struct videobuf_dvb_frontend
*fe0
;
1109 /* FIXME: add support for multi-frontend */
1110 mutex_init(&dev
->frontends
.lock
);
1111 INIT_LIST_HEAD(&dev
->frontends
.felist
);
1113 printk(KERN_INFO
"%s() allocating 1 frontend\n", __func__
);
1114 fe0
= videobuf_dvb_alloc_frontend(&dev
->frontends
, 1);
1116 printk(KERN_ERR
"%s() failed to alloc\n", __func__
);
1120 /* init struct videobuf_dvb */
1121 dev
->ts
.nr_bufs
= 32;
1122 dev
->ts
.nr_packets
= 32*4;
1123 fe0
->dvb
.name
= dev
->name
;
1124 videobuf_queue_sg_init(&fe0
->dvb
.dvbq
, &saa7134_ts_qops
,
1125 &dev
->pci
->dev
, &dev
->slock
,
1126 V4L2_BUF_TYPE_VIDEO_CAPTURE
,
1127 V4L2_FIELD_ALTERNATE
,
1128 sizeof(struct saa7134_buf
),
1131 switch (dev
->board
) {
1132 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL
:
1133 dprintk("pinnacle 300i dvb setup\n");
1134 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
, &pinnacle_300i
,
1136 if (fe0
->dvb
.frontend
) {
1137 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= mt352_pinnacle_tuner_set_params
;
1140 case SAA7134_BOARD_AVERMEDIA_777
:
1141 case SAA7134_BOARD_AVERMEDIA_A16AR
:
1142 dprintk("avertv 777 dvb setup\n");
1143 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
, &avermedia_777
,
1145 if (fe0
->dvb
.frontend
) {
1146 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1147 &dev
->i2c_adap
, 0x61,
1148 TUNER_PHILIPS_TD1316
);
1151 case SAA7134_BOARD_AVERMEDIA_A16D
:
1152 dprintk("AverMedia A16D dvb setup\n");
1153 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
,
1154 &avermedia_xc3028_mt352_dev
,
1158 case SAA7134_BOARD_MD7134
:
1159 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1162 if (fe0
->dvb
.frontend
) {
1163 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1164 &dev
->i2c_adap
, medion_cardbus
.tuner_address
,
1165 TUNER_PHILIPS_FMD1216ME_MK3
);
1168 case SAA7134_BOARD_PHILIPS_TOUGH
:
1169 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1170 &philips_tu1216_60_config
,
1172 if (fe0
->dvb
.frontend
) {
1173 fe0
->dvb
.frontend
->ops
.tuner_ops
.init
= philips_tu1216_init
;
1174 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= philips_tda6651_pll_set
;
1177 case SAA7134_BOARD_FLYDVBTDUO
:
1178 case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS
:
1179 if (configure_tda827x_fe(dev
, &tda827x_lifeview_config
,
1180 &tda827x_cfg_0
) < 0)
1181 goto dettach_frontend
;
1183 case SAA7134_BOARD_PHILIPS_EUROPA
:
1184 case SAA7134_BOARD_VIDEOMATE_DVBT_300
:
1185 case SAA7134_BOARD_ASUS_EUROPA_HYBRID
:
1186 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1187 &philips_europa_config
,
1189 if (fe0
->dvb
.frontend
) {
1190 dev
->original_demod_sleep
= fe0
->dvb
.frontend
->ops
.sleep
;
1191 fe0
->dvb
.frontend
->ops
.sleep
= philips_europa_demod_sleep
;
1192 fe0
->dvb
.frontend
->ops
.tuner_ops
.init
= philips_europa_tuner_init
;
1193 fe0
->dvb
.frontend
->ops
.tuner_ops
.sleep
= philips_europa_tuner_sleep
;
1194 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= philips_td1316_tuner_set_params
;
1197 case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000
:
1198 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1199 &technotrend_budget_t3000_config
,
1201 if (fe0
->dvb
.frontend
) {
1202 dev
->original_demod_sleep
= fe0
->dvb
.frontend
->ops
.sleep
;
1203 fe0
->dvb
.frontend
->ops
.sleep
= philips_europa_demod_sleep
;
1204 fe0
->dvb
.frontend
->ops
.tuner_ops
.init
= philips_europa_tuner_init
;
1205 fe0
->dvb
.frontend
->ops
.tuner_ops
.sleep
= philips_europa_tuner_sleep
;
1206 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= philips_td1316_tuner_set_params
;
1209 case SAA7134_BOARD_VIDEOMATE_DVBT_200
:
1210 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1211 &philips_tu1216_61_config
,
1213 if (fe0
->dvb
.frontend
) {
1214 fe0
->dvb
.frontend
->ops
.tuner_ops
.init
= philips_tu1216_init
;
1215 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= philips_tda6651_pll_set
;
1218 case SAA7134_BOARD_KWORLD_DVBT_210
:
1219 if (configure_tda827x_fe(dev
, &kworld_dvb_t_210_config
,
1220 &tda827x_cfg_2
) < 0)
1221 goto dettach_frontend
;
1223 case SAA7134_BOARD_HAUPPAUGE_HVR1120
:
1224 fe0
->dvb
.frontend
= dvb_attach(tda10048_attach
,
1225 &hcw_tda10048_config
,
1227 if (fe0
->dvb
.frontend
!= NULL
) {
1228 dvb_attach(tda829x_attach
, fe0
->dvb
.frontend
,
1229 &dev
->i2c_adap
, 0x4b,
1231 dvb_attach(tda18271_attach
, fe0
->dvb
.frontend
,
1232 0x60, &dev
->i2c_adap
,
1233 &hcw_tda18271_config
);
1236 case SAA7134_BOARD_PHILIPS_TIGER
:
1237 if (configure_tda827x_fe(dev
, &philips_tiger_config
,
1238 &tda827x_cfg_0
) < 0)
1239 goto dettach_frontend
;
1241 case SAA7134_BOARD_PINNACLE_PCTV_310i
:
1242 if (configure_tda827x_fe(dev
, &pinnacle_pctv_310i_config
,
1243 &tda827x_cfg_1
) < 0)
1244 goto dettach_frontend
;
1246 case SAA7134_BOARD_HAUPPAUGE_HVR1110
:
1247 if (configure_tda827x_fe(dev
, &hauppauge_hvr_1110_config
,
1248 &tda827x_cfg_1
) < 0)
1249 goto dettach_frontend
;
1251 case SAA7134_BOARD_HAUPPAUGE_HVR1150
:
1252 fe0
->dvb
.frontend
= dvb_attach(lgdt3305_attach
,
1253 &hcw_lgdt3305_config
,
1255 if (fe0
->dvb
.frontend
) {
1256 dvb_attach(tda829x_attach
, fe0
->dvb
.frontend
,
1257 &dev
->i2c_adap
, 0x4b,
1259 dvb_attach(tda18271_attach
, fe0
->dvb
.frontend
,
1260 0x60, &dev
->i2c_adap
,
1261 &hcw_tda18271_config
);
1264 case SAA7134_BOARD_ASUSTeK_P7131_DUAL
:
1265 if (configure_tda827x_fe(dev
, &asus_p7131_dual_config
,
1266 &tda827x_cfg_0
) < 0)
1267 goto dettach_frontend
;
1269 case SAA7134_BOARD_FLYDVBT_LR301
:
1270 if (configure_tda827x_fe(dev
, &tda827x_lifeview_config
,
1271 &tda827x_cfg_0
) < 0)
1272 goto dettach_frontend
;
1274 case SAA7134_BOARD_FLYDVB_TRIO
:
1275 if (!use_frontend
) { /* terrestrial */
1276 if (configure_tda827x_fe(dev
, &lifeview_trio_config
,
1277 &tda827x_cfg_0
) < 0)
1278 goto dettach_frontend
;
1279 } else { /* satellite */
1280 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
, &flydvbs
, &dev
->i2c_adap
);
1281 if (fe0
->dvb
.frontend
) {
1282 if (dvb_attach(tda826x_attach
, fe0
->dvb
.frontend
, 0x63,
1283 &dev
->i2c_adap
, 0) == NULL
) {
1284 wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__
);
1285 goto dettach_frontend
;
1287 if (dvb_attach(isl6421_attach
, fe0
->dvb
.frontend
, &dev
->i2c_adap
,
1288 0x08, 0, 0) == NULL
) {
1289 wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__
);
1290 goto dettach_frontend
;
1295 case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331
:
1296 case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS
:
1297 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1298 &ads_tech_duo_config
,
1300 if (fe0
->dvb
.frontend
) {
1301 if (dvb_attach(tda827x_attach
,fe0
->dvb
.frontend
,
1302 ads_tech_duo_config
.tuner_address
, &dev
->i2c_adap
,
1303 &ads_duo_cfg
) == NULL
) {
1304 wprintk("no tda827x tuner found at addr: %02x\n",
1305 ads_tech_duo_config
.tuner_address
);
1306 goto dettach_frontend
;
1309 wprintk("failed to attach tda10046\n");
1311 case SAA7134_BOARD_TEVION_DVBT_220RF
:
1312 if (configure_tda827x_fe(dev
, &tevion_dvbt220rf_config
,
1313 &tda827x_cfg_0
) < 0)
1314 goto dettach_frontend
;
1316 case SAA7134_BOARD_MEDION_MD8800_QUADRO
:
1317 if (!use_frontend
) { /* terrestrial */
1318 if (configure_tda827x_fe(dev
, &md8800_dvbt_config
,
1319 &tda827x_cfg_0
) < 0)
1320 goto dettach_frontend
;
1321 } else { /* satellite */
1322 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
,
1323 &flydvbs
, &dev
->i2c_adap
);
1324 if (fe0
->dvb
.frontend
) {
1325 struct dvb_frontend
*fe
= fe0
->dvb
.frontend
;
1326 u8 dev_id
= dev
->eedata
[2];
1328 struct i2c_msg msg
= {.addr
= 0x08, .flags
= 0, .len
= 1};
1330 if (dvb_attach(tda826x_attach
, fe0
->dvb
.frontend
,
1331 0x60, &dev
->i2c_adap
, 0) == NULL
) {
1332 wprintk("%s: Medion Quadro, no tda826x "
1333 "found !\n", __func__
);
1334 goto dettach_frontend
;
1336 if (dev_id
!= 0x08) {
1337 /* we need to open the i2c gate (we know it exists) */
1338 fe
->ops
.i2c_gate_ctrl(fe
, 1);
1339 if (dvb_attach(isl6405_attach
, fe
,
1340 &dev
->i2c_adap
, 0x08, 0, 0) == NULL
) {
1341 wprintk("%s: Medion Quadro, no ISL6405 "
1342 "found !\n", __func__
);
1343 goto dettach_frontend
;
1345 if (dev_id
== 0x07) {
1346 /* fire up the 2nd section of the LNB supply since
1347 we can't do this from the other section */
1349 i2c_transfer(&dev
->i2c_adap
, &msg
, 1);
1351 fe
->ops
.i2c_gate_ctrl(fe
, 0);
1352 dev
->original_set_voltage
= fe
->ops
.set_voltage
;
1353 fe
->ops
.set_voltage
= md8800_set_voltage
;
1354 dev
->original_set_high_voltage
= fe
->ops
.enable_high_lnb_voltage
;
1355 fe
->ops
.enable_high_lnb_voltage
= md8800_set_high_voltage
;
1357 fe
->ops
.set_voltage
= md8800_set_voltage2
;
1358 fe
->ops
.enable_high_lnb_voltage
= md8800_set_high_voltage2
;
1363 case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180
:
1364 fe0
->dvb
.frontend
= dvb_attach(nxt200x_attach
, &avertvhda180
,
1366 if (fe0
->dvb
.frontend
)
1367 dvb_attach(dvb_pll_attach
, fe0
->dvb
.frontend
, 0x61,
1368 NULL
, DVB_PLL_TDHU2
);
1370 case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI
:
1371 case SAA7134_BOARD_KWORLD_ATSC110
:
1372 fe0
->dvb
.frontend
= dvb_attach(nxt200x_attach
, &kworldatsc110
,
1374 if (fe0
->dvb
.frontend
)
1375 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1376 &dev
->i2c_adap
, 0x61,
1377 TUNER_PHILIPS_TUV1236D
);
1379 case SAA7134_BOARD_FLYDVBS_LR300
:
1380 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
, &flydvbs
,
1382 if (fe0
->dvb
.frontend
) {
1383 if (dvb_attach(tda826x_attach
, fe0
->dvb
.frontend
, 0x60,
1384 &dev
->i2c_adap
, 0) == NULL
) {
1385 wprintk("%s: No tda826x found!\n", __func__
);
1386 goto dettach_frontend
;
1388 if (dvb_attach(isl6421_attach
, fe0
->dvb
.frontend
,
1389 &dev
->i2c_adap
, 0x08, 0, 0) == NULL
) {
1390 wprintk("%s: No ISL6421 found!\n", __func__
);
1391 goto dettach_frontend
;
1395 case SAA7134_BOARD_ASUS_EUROPA2_HYBRID
:
1396 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1399 if (fe0
->dvb
.frontend
) {
1400 dev
->original_demod_sleep
= fe0
->dvb
.frontend
->ops
.sleep
;
1401 fe0
->dvb
.frontend
->ops
.sleep
= philips_europa_demod_sleep
;
1403 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1404 &dev
->i2c_adap
, medion_cardbus
.tuner_address
,
1405 TUNER_PHILIPS_FMD1216ME_MK3
);
1408 case SAA7134_BOARD_VIDEOMATE_DVBT_200A
:
1409 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1410 &philips_europa_config
,
1412 if (fe0
->dvb
.frontend
) {
1413 fe0
->dvb
.frontend
->ops
.tuner_ops
.init
= philips_td1316_tuner_init
;
1414 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= philips_td1316_tuner_set_params
;
1417 case SAA7134_BOARD_CINERGY_HT_PCMCIA
:
1418 if (configure_tda827x_fe(dev
, &cinergy_ht_config
,
1419 &tda827x_cfg_0
) < 0)
1420 goto dettach_frontend
;
1422 case SAA7134_BOARD_CINERGY_HT_PCI
:
1423 if (configure_tda827x_fe(dev
, &cinergy_ht_pci_config
,
1424 &tda827x_cfg_0
) < 0)
1425 goto dettach_frontend
;
1427 case SAA7134_BOARD_PHILIPS_TIGER_S
:
1428 if (configure_tda827x_fe(dev
, &philips_tiger_s_config
,
1429 &tda827x_cfg_2
) < 0)
1430 goto dettach_frontend
;
1432 case SAA7134_BOARD_ASUS_P7131_4871
:
1433 if (configure_tda827x_fe(dev
, &asus_p7131_4871_config
,
1434 &tda827x_cfg_2
) < 0)
1435 goto dettach_frontend
;
1437 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA
:
1438 if (configure_tda827x_fe(dev
, &asus_p7131_hybrid_lna_config
,
1439 &tda827x_cfg_2
) < 0)
1440 goto dettach_frontend
;
1442 case SAA7134_BOARD_AVERMEDIA_SUPER_007
:
1443 if (configure_tda827x_fe(dev
, &avermedia_super_007_config
,
1444 &tda827x_cfg_0
) < 0)
1445 goto dettach_frontend
;
1447 case SAA7134_BOARD_TWINHAN_DTV_DVB_3056
:
1448 if (configure_tda827x_fe(dev
, &twinhan_dtv_dvb_3056_config
,
1449 &tda827x_cfg_2_sw42
) < 0)
1450 goto dettach_frontend
;
1452 case SAA7134_BOARD_PHILIPS_SNAKE
:
1453 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
, &flydvbs
,
1455 if (fe0
->dvb
.frontend
) {
1456 if (dvb_attach(tda826x_attach
, fe0
->dvb
.frontend
, 0x60,
1457 &dev
->i2c_adap
, 0) == NULL
) {
1458 wprintk("%s: No tda826x found!\n", __func__
);
1459 goto dettach_frontend
;
1461 if (dvb_attach(lnbp21_attach
, fe0
->dvb
.frontend
,
1462 &dev
->i2c_adap
, 0, 0) == NULL
) {
1463 wprintk("%s: No lnbp21 found!\n", __func__
);
1464 goto dettach_frontend
;
1468 case SAA7134_BOARD_CREATIX_CTX953
:
1469 if (configure_tda827x_fe(dev
, &md8800_dvbt_config
,
1470 &tda827x_cfg_0
) < 0)
1471 goto dettach_frontend
;
1473 case SAA7134_BOARD_MSI_TVANYWHERE_AD11
:
1474 if (configure_tda827x_fe(dev
, &philips_tiger_s_config
,
1475 &tda827x_cfg_2
) < 0)
1476 goto dettach_frontend
;
1478 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506
:
1479 dprintk("AverMedia E506R dvb setup\n");
1480 saa7134_set_gpio(dev
, 25, 0);
1482 saa7134_set_gpio(dev
, 25, 1);
1483 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
,
1484 &avermedia_xc3028_mt352_dev
,
1488 case SAA7134_BOARD_MD7134_BRIDGE_2
:
1489 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
,
1490 &sd1878_4m
, &dev
->i2c_adap
);
1491 if (fe0
->dvb
.frontend
) {
1492 struct dvb_frontend
*fe
;
1493 if (dvb_attach(dvb_pll_attach
, fe0
->dvb
.frontend
, 0x60,
1494 &dev
->i2c_adap
, DVB_PLL_PHILIPS_SD1878_TDA8261
) == NULL
) {
1495 wprintk("%s: MD7134 DVB-S, no SD1878 "
1496 "found !\n", __func__
);
1497 goto dettach_frontend
;
1499 /* we need to open the i2c gate (we know it exists) */
1500 fe
= fe0
->dvb
.frontend
;
1501 fe
->ops
.i2c_gate_ctrl(fe
, 1);
1502 if (dvb_attach(isl6405_attach
, fe
,
1503 &dev
->i2c_adap
, 0x08, 0, 0) == NULL
) {
1504 wprintk("%s: MD7134 DVB-S, no ISL6405 "
1505 "found !\n", __func__
);
1506 goto dettach_frontend
;
1508 fe
->ops
.i2c_gate_ctrl(fe
, 0);
1509 dev
->original_set_voltage
= fe
->ops
.set_voltage
;
1510 fe
->ops
.set_voltage
= md8800_set_voltage
;
1511 dev
->original_set_high_voltage
= fe
->ops
.enable_high_lnb_voltage
;
1512 fe
->ops
.enable_high_lnb_voltage
= md8800_set_high_voltage
;
1515 case SAA7134_BOARD_AVERMEDIA_M103
:
1516 saa7134_set_gpio(dev
, 25, 0);
1518 saa7134_set_gpio(dev
, 25, 1);
1519 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
,
1520 &avermedia_xc3028_mt352_dev
,
1524 case SAA7134_BOARD_ASUSTeK_TIGER_3IN1
:
1525 if (!use_frontend
) { /* terrestrial */
1526 if (configure_tda827x_fe(dev
, &asus_tiger_3in1_config
,
1527 &tda827x_cfg_2
) < 0)
1528 goto dettach_frontend
;
1529 } else { /* satellite */
1530 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
,
1531 &flydvbs
, &dev
->i2c_adap
);
1532 if (fe0
->dvb
.frontend
) {
1533 if (dvb_attach(tda826x_attach
,
1534 fe0
->dvb
.frontend
, 0x60,
1535 &dev
->i2c_adap
, 0) == NULL
) {
1536 wprintk("%s: Asus Tiger 3in1, no "
1537 "tda826x found!\n", __func__
);
1538 goto dettach_frontend
;
1540 if (dvb_attach(lnbp21_attach
, fe0
->dvb
.frontend
,
1541 &dev
->i2c_adap
, 0, 0) == NULL
) {
1542 wprintk("%s: Asus Tiger 3in1, no lnbp21"
1543 " found!\n", __func__
);
1544 goto dettach_frontend
;
1549 case SAA7134_BOARD_ASUSTeK_TIGER
:
1550 if (configure_tda827x_fe(dev
, &philips_tiger_config
,
1551 &tda827x_cfg_0
) < 0)
1552 goto dettach_frontend
;
1554 case SAA7134_BOARD_BEHOLD_H6
:
1555 fe0
->dvb
.frontend
= dvb_attach(zl10353_attach
,
1558 if (fe0
->dvb
.frontend
) {
1559 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1560 &dev
->i2c_adap
, 0x61,
1561 TUNER_PHILIPS_FMD1216MEX_MK3
);
1564 case SAA7134_BOARD_BEHOLD_X7
:
1565 fe0
->dvb
.frontend
= dvb_attach(zl10353_attach
,
1568 if (fe0
->dvb
.frontend
) {
1569 dvb_attach(xc5000_attach
, fe0
->dvb
.frontend
,
1570 &dev
->i2c_adap
, &behold_x7_tunerconfig
);
1573 case SAA7134_BOARD_BEHOLD_H7
:
1574 fe0
->dvb
.frontend
= dvb_attach(zl10353_attach
,
1577 if (fe0
->dvb
.frontend
) {
1578 dvb_attach(xc5000_attach
, fe0
->dvb
.frontend
,
1579 &dev
->i2c_adap
, &behold_x7_tunerconfig
);
1582 case SAA7134_BOARD_AVERMEDIA_A700_PRO
:
1583 case SAA7134_BOARD_AVERMEDIA_A700_HYBRID
:
1584 /* Zarlink ZL10313 */
1585 fe0
->dvb
.frontend
= dvb_attach(mt312_attach
,
1586 &avertv_a700_mt312
, &dev
->i2c_adap
);
1587 if (fe0
->dvb
.frontend
) {
1588 if (dvb_attach(zl10036_attach
, fe0
->dvb
.frontend
,
1589 &avertv_a700_tuner
, &dev
->i2c_adap
) == NULL
) {
1590 wprintk("%s: No zl10036 found!\n",
1595 case SAA7134_BOARD_VIDEOMATE_S350
:
1596 fe0
->dvb
.frontend
= dvb_attach(mt312_attach
,
1597 &zl10313_compro_s350_config
, &dev
->i2c_adap
);
1598 if (fe0
->dvb
.frontend
)
1599 if (dvb_attach(zl10039_attach
, fe0
->dvb
.frontend
,
1600 0x60, &dev
->i2c_adap
) == NULL
)
1601 wprintk("%s: No zl10039 found!\n",
1605 case SAA7134_BOARD_ZOLID_HYBRID_PCI
:
1606 fe0
->dvb
.frontend
= dvb_attach(tda10048_attach
,
1607 &zolid_tda10048_config
,
1609 if (fe0
->dvb
.frontend
!= NULL
) {
1610 dvb_attach(tda829x_attach
, fe0
->dvb
.frontend
,
1611 &dev
->i2c_adap
, 0x4b,
1613 dvb_attach(tda18271_attach
, fe0
->dvb
.frontend
,
1614 0x60, &dev
->i2c_adap
,
1615 &zolid_tda18271_config
);
1618 case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S
:
1619 fe0
->dvb
.frontend
= dvb_attach(tda10048_attach
,
1620 &dtv1000s_tda10048_config
,
1622 if (fe0
->dvb
.frontend
!= NULL
) {
1623 dvb_attach(tda829x_attach
, fe0
->dvb
.frontend
,
1624 &dev
->i2c_adap
, 0x4b,
1626 dvb_attach(tda18271_attach
, fe0
->dvb
.frontend
,
1627 0x60, &dev
->i2c_adap
,
1628 &dtv1000s_tda18271_config
);
1631 case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG
:
1632 saa_writel(SAA7134_GPIO_GPMODE0
>> 2, 0x14000);
1633 saa_writel(SAA7134_GPIO_GPSTATUS0
>> 2, 0x14000);
1635 saa_writel(SAA7134_GPIO_GPMODE0
>> 2, 0x54000);
1636 saa_writel(SAA7134_GPIO_GPSTATUS0
>> 2, 0x54000);
1638 fe0
->dvb
.frontend
= dvb_attach(mb86a20s_attach
,
1639 &kworld_mb86a20s_config
,
1641 if (fe0
->dvb
.frontend
!= NULL
) {
1642 dvb_attach(tda18271_attach
, fe0
->dvb
.frontend
,
1643 0x60, &dev
->i2c_adap
,
1644 &kworld_tda18271_config
);
1648 wprintk("Huh? unknown DVB card?\n");
1652 if (attach_xc3028
) {
1653 struct dvb_frontend
*fe
;
1654 struct xc2028_config cfg
= {
1655 .i2c_adap
= &dev
->i2c_adap
,
1659 if (!fe0
->dvb
.frontend
)
1660 goto dettach_frontend
;
1662 fe
= dvb_attach(xc2028_attach
, fe0
->dvb
.frontend
, &cfg
);
1664 printk(KERN_ERR
"%s/2: xc3028 attach failed\n",
1666 goto dettach_frontend
;
1670 if (NULL
== fe0
->dvb
.frontend
) {
1671 printk(KERN_ERR
"%s/dvb: frontend initialization failed\n", dev
->name
);
1672 goto dettach_frontend
;
1674 /* define general-purpose callback pointer */
1675 fe0
->dvb
.frontend
->callback
= saa7134_tuner_callback
;
1677 /* register everything else */
1678 ret
= videobuf_dvb_register_bus(&dev
->frontends
, THIS_MODULE
, dev
,
1679 &dev
->pci
->dev
, adapter_nr
, 0, NULL
);
1681 /* this sequence is necessary to make the tda1004x load its firmware
1682 * and to enter analog mode of hybrid boards
1685 if (fe0
->dvb
.frontend
->ops
.init
)
1686 fe0
->dvb
.frontend
->ops
.init(fe0
->dvb
.frontend
);
1687 if (fe0
->dvb
.frontend
->ops
.sleep
)
1688 fe0
->dvb
.frontend
->ops
.sleep(fe0
->dvb
.frontend
);
1689 if (fe0
->dvb
.frontend
->ops
.tuner_ops
.sleep
)
1690 fe0
->dvb
.frontend
->ops
.tuner_ops
.sleep(fe0
->dvb
.frontend
);
1695 videobuf_dvb_dealloc_frontends(&dev
->frontends
);
1699 static int dvb_fini(struct saa7134_dev
*dev
)
1701 struct videobuf_dvb_frontend
*fe0
;
1703 /* Get the first frontend */
1704 fe0
= videobuf_dvb_get_frontend(&dev
->frontends
, 1);
1708 /* FIXME: I suspect that this code is bogus, since the entry for
1709 Pinnacle 300I DVB-T PAL already defines the proper init to allow
1710 the detection of mt2032 (TDA9887_PORT2_INACTIVE)
1712 if (dev
->board
== SAA7134_BOARD_PINNACLE_300I_DVBT_PAL
) {
1713 struct v4l2_priv_tun_config tda9887_cfg
;
1714 static int on
= TDA9887_PRESENT
| TDA9887_PORT2_INACTIVE
;
1716 tda9887_cfg
.tuner
= TUNER_TDA9887
;
1717 tda9887_cfg
.priv
= &on
;
1719 /* otherwise we don't detect the tuner on next insmod */
1720 saa_call_all(dev
, tuner
, s_config
, &tda9887_cfg
);
1721 } else if (dev
->board
== SAA7134_BOARD_MEDION_MD8800_QUADRO
) {
1722 if ((dev
->eedata
[2] == 0x07) && use_frontend
) {
1723 /* turn off the 2nd lnb supply */
1725 struct i2c_msg msg
= {.addr
= 0x08, .buf
= &data
, .flags
= 0, .len
= 1};
1726 struct dvb_frontend
*fe
;
1727 fe
= fe0
->dvb
.frontend
;
1728 if (fe
->ops
.i2c_gate_ctrl
) {
1729 fe
->ops
.i2c_gate_ctrl(fe
, 1);
1730 i2c_transfer(&dev
->i2c_adap
, &msg
, 1);
1731 fe
->ops
.i2c_gate_ctrl(fe
, 0);
1735 videobuf_dvb_unregister_bus(&dev
->frontends
);
1739 static struct saa7134_mpeg_ops dvb_ops
= {
1740 .type
= SAA7134_MPEG_DVB
,
1745 static int __init
dvb_register(void)
1747 return saa7134_ts_register(&dvb_ops
);
1750 static void __exit
dvb_unregister(void)
1752 saa7134_ts_unregister(&dvb_ops
);
1755 module_init(dvb_register
);
1756 module_exit(dvb_unregister
);
1758 /* ------------------------------------------------------------------ */