scripts/recordmcount.pl

   1 #!/usr/bin/perl -w
   2 # (c) 2008, Steven Rostedt <srostedt@redhat.com>
   3 # Licensed under the terms of the GNU GPL License version 2
   4 #
   5 # recordmcount.pl - makes a section called __mcount_loc that holds
   6 #                   all the offsets to the calls to mcount.
   7 #
   8 #
   9 # What we want to end up with this is that each object file will have a
  10 # section called __mcount_loc that will hold the list of pointers to mcount
  11 # callers. After final linking, the vmlinux will have within .init.data the
  12 # list of all callers to mcount between __start_mcount_loc and __stop_mcount_loc.
  13 # Later on boot up, the kernel will read this list, save the locations and turn
  14 # them into nops. When tracing or profiling is later enabled, these locations
  15 # will then be converted back to pointers to some function.
  16 #
  17 # This is no easy feat. This script is called just after the original
  18 # object is compiled and before it is linked.
  19 #
  20 # When parse this object file using 'objdump', the references to the call
  21 # sites are offsets from the section that the call site is in. Hence, all
  22 # functions in a section that has a call site to mcount, will have the
  23 # offset from the beginning of the section and not the beginning of the
  24 # function.
  25 #
  26 # But where this section will reside finally in vmlinx is undetermined at
  27 # this point. So we can't use this kind of offsets to record the final
  28 # address of this call site.
  29 #
  30 # The trick is to change the call offset referring the start of a section to
  31 # referring a function symbol in this section. During the link step, 'ld' will
  32 # compute the final address according to the information we record.
  33 #
  34 # e.g.
  35 #
  36 #  .section ".sched.text", "ax"
  37 #        [...]
  38 #  func1:
  39 #        [...]
  40 #        call mcount  (offset: 0x10)
  41 #        [...]
  42 #        ret
  43 #  .globl fun2
  44 #  func2:             (offset: 0x20)
  45 #        [...]
  46 #        [...]
  47 #        ret
  48 #  func3:
  49 #        [...]
  50 #        call mcount (offset: 0x30)
  51 #        [...]
  52 #
  53 # Both relocation offsets for the mcounts in the above example will be
  54 # offset from .sched.text. If we choose global symbol func2 as a reference and
  55 # make another file called tmp.s with the new offsets:
  56 #
  57 #  .section __mcount_loc
  58 #  .quad  func2 - 0x10
  59 #  .quad  func2 + 0x10
  60 #
  61 # We can then compile this tmp.s into tmp.o, and link it back to the original
  62 # object.
  63 #
  64 # In our algorithm, we will choose the first global function we meet in this
  65 # section as the reference. But this gets hard if there is no global functions
  66 # in this section. In such a case we have to select a local one. E.g. func1:
  67 #
  68 #  .section ".sched.text", "ax"
  69 #  func1:
  70 #        [...]
  71 #        call mcount  (offset: 0x10)
  72 #        [...]
  73 #        ret
  74 #  func2:
  75 #        [...]
  76 #        call mcount (offset: 0x20)
  77 #        [...]
  78 #  .section "other.section"
  79 #
  80 # If we make the tmp.s the same as above, when we link together with
  81 # the original object, we will end up with two symbols for func1:
  82 # one local, one global.  After final compile, we will end up with
  83 # an undefined reference to func1 or a wrong reference to another global
  84 # func1 in other files.
  85 #
  86 # Since local objects can reference local variables, we need to find
  87 # a way to make tmp.o reference the local objects of the original object
  88 # file after it is linked together. To do this, we convert func1
  89 # into a global symbol before linking tmp.o. Then after we link tmp.o
  90 # we will only have a single symbol for func1 that is global.
  91 # We can convert func1 back into a local symbol and we are done.
  92 #
  93 # Here are the steps we take:
  94 #
  95 # 1) Record all the local and weak symbols by using 'nm'
  96 # 2) Use objdump to find all the call site offsets and sections for
  97 #    mcount.
  98 # 3) Compile the list into its own object.
  99 # 4) Do we have to deal with local functions? If not, go to step 8.
 100 # 5) Make an object that converts these local functions to global symbols
 101 #    with objcopy.
 102 # 6) Link together this new object with the list object.
 103 # 7) Convert the local functions back to local symbols and rename
 104 #    the result as the original object.
 105 # 8) Link the object with the list object.
 106 # 9) Move the result back to the original object.
 107 #
 108
 109 use strict;
 110
 111 my $P = $0;
 112 $P =~ s@.*/@@g;
 113
 114 my $V = '0.1';
 115
 116 if ($#ARGV != 11) {
 117         print "usage: $P arch endian bits objdump objcopy cc ld nm rm mv is_module inputfile\n";
 118         print "version: $V\n";
 119         exit(1);
 120 }
 121
 122 my ($arch, $endian, $bits, $objdump, $objcopy, $cc,
 123     $ld, $nm, $rm, $mv, $is_module, $inputfile) = @ARGV;
 124
 125 # This file refers to mcount and shouldn't be ftraced, so lets' ignore it
 126 if ($inputfile =~ m,kernel/trace/ftrace\.o$,) {
 127     exit(0);
 128 }
 129
 130 # Acceptable sections to record.
 131 my %text_sections = (
 132      ".text" => 1,
 133      ".ref.text" => 1,
 134      ".sched.text" => 1,
 135      ".spinlock.text" => 1,
 136      ".irqentry.text" => 1,
 137      ".text.unlikely" => 1,
 138 );
 139
 140 # Note: we are nice to C-programmers here, thus we skip the '||='-idiom.
 141 $objdump = 'objdump' if (!$objdump);
 142 $objcopy = 'objcopy' if (!$objcopy);
 143 $cc = 'gcc' if (!$cc);
 144 $ld = 'ld' if (!$ld);
 145 $nm = 'nm' if (!$nm);
 146 $rm = 'rm' if (!$rm);
 147 $mv = 'mv' if (!$mv);
 148
 149 #print STDERR "running: $P '$arch' '$objdump' '$objcopy' '$cc' '$ld' " .
 150 #    "'$nm' '$rm' '$mv' '$inputfile'\n";
 151
 152 my %locals;             # List of local (static) functions
 153 my %weak;               # List of weak functions
 154 my %convert;            # List of local functions used that needs conversion
 155
 156 my $type;
 157 my $local_regex;        # Match a local function (return function)
 158 my $weak_regex;         # Match a weak function (return function)
 159 my $section_regex;      # Find the start of a section
 160 my $function_regex;     # Find the name of a function
 161                         #    (return offset and func name)
 162 my $mcount_regex;       # Find the call site to mcount (return offset)
 163 my $mcount_adjust;      # Address adjustment to mcount offset
 164 my $alignment;          # The .align value to use for $mcount_section
 165 my $section_type;       # Section header plus possible alignment command
 166 my $can_use_local = 0;  # If we can use local function references
 167
 168 # Shut up recordmcount if user has older objcopy
 169 my $quiet_recordmcount = ".tmp_quiet_recordmcount";
 170 my $print_warning = 1;
 171 $print_warning = 0 if ( -f $quiet_recordmcount);
 172
 173 ##
 174 # check_objcopy - whether objcopy supports --globalize-symbols
 175 #
 176 #  --globalize-symbols came out in 2.17, we must test the version
 177 #  of objcopy, and if it is less than 2.17, then we can not
 178 #  record local functions.
 179 sub check_objcopy
 180 {
 181     open (IN, "$objcopy --version |") or die "error running $objcopy";
 182     while (<IN>) {
 183         if (/objcopy.*\s(\d+)\.(\d+)/) {
 184             $can_use_local = 1 if ($1 > 2 || ($1 == 2 && $2 >= 17));
 185             last;
 186         }
 187     }
 188     close (IN);
 189
 190     if (!$can_use_local && $print_warning) {
 191         print STDERR "WARNING: could not find objcopy version or version " .
 192             "is less than 2.17.\n" .
 193             "\tLocal function references are disabled.\n";
 194         open (QUIET, ">$quiet_recordmcount");
 195         printf QUIET "Disables the warning from recordmcount.pl\n";
 196         close QUIET;
 197     }
 198 }
 199
 200 if ($arch =~ /(x86(_64)?)|(i386)/) {
 201     if ($bits == 64) {
 202         $arch = "x86_64";
 203     } else {
 204         $arch = "i386";
 205     }
 206 }
 207
 208 #
 209 # We base the defaults off of i386, the other archs may
 210 # feel free to change them in the below if statements.
 211 #
 212 $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
 213 $weak_regex = "^[0-9a-fA-F]+\\s+([wW])\\s+(\\S+)";
 214 $section_regex = "Disassembly of section\\s+(\\S+):";
 215 $function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
 216 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount\$";
 217 $section_type = '@progbits';
 218 $mcount_adjust = 0;
 219 $type = ".long";
 220
 221 if ($arch eq "x86_64") {
 222     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount([+-]0x[0-9a-zA-Z]+)?\$";
 223     $type = ".quad";
 224     $alignment = 8;
 225
 226     # force flags for this arch
 227     $ld .= " -m elf_x86_64";
 228     $objdump .= " -M x86-64";
 229     $objcopy .= " -O elf64-x86-64";
 230     $cc .= " -m64";
 231
 232 } elsif ($arch eq "i386") {
 233     $alignment = 4;
 234
 235     # force flags for this arch
 236     $ld .= " -m elf_i386";
 237     $objdump .= " -M i386";
 238     $objcopy .= " -O elf32-i386";
 239     $cc .= " -m32";
 240
 241 } elsif ($arch eq "s390" && $bits == 32) {
 242     $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_32\\s+_mcount\$";
 243     $alignment = 4;
 244     $ld .= " -m elf_s390";
 245     $cc .= " -m31";
 246
 247 } elsif ($arch eq "s390" && $bits == 64) {
 248     $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";
 249     $alignment = 8;
 250     $type = ".quad";
 251     $ld .= " -m elf64_s390";
 252     $cc .= " -m64";
 253
 254 } elsif ($arch eq "sh") {
 255     $alignment = 2;
 256
 257     # force flags for this arch
 258     $ld .= " -m shlelf_linux";
 259     $objcopy .= " -O elf32-sh-linux";
 260     $cc .= " -m32";
 261
 262 } elsif ($arch eq "powerpc") {
 263     $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
 264     $function_regex = "^([0-9a-fA-F]+)\\s+<(\\.?.*?)>:";
 265     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s\\.?_mcount\$";
 266
 267     if ($bits == 64) {
 268         $type = ".quad";
 269     }
 270
 271 } elsif ($arch eq "arm") {
 272     $alignment = 2;
 273     $section_type = '%progbits';
 274     $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_ARM_(CALL|PC24|THM_CALL)" .
 275                         "\\s+(__gnu_mcount_nc|mcount)\$";
 276
 277 } elsif ($arch eq "ia64") {
 278     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
 279     $type = "data8";
 280
 281     if ($is_module eq "0") {
 282         $cc .= " -mconstant-gp";
 283     }
 284 } elsif ($arch eq "sparc64") {
 285     # In the objdump output there are giblets like:
 286     # 0000000000000000 <igmp_net_exit-0x18>:
 287     # As there's some data blobs that get emitted into the
 288     # text section before the first instructions and the first
 289     # real symbols.  We don't want to match that, so to combat
 290     # this we use '\w' so we'll match just plain symbol names,
 291     # and not those that also include hex offsets inside of the
 292     # '<>' brackets.  Actually the generic function_regex setting
 293     # could safely use this too.
 294     $function_regex = "^([0-9a-fA-F]+)\\s+<(\\w*?)>:";
 295
 296     # Sparc64 calls '_mcount' instead of plain 'mcount'.
 297     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
 298
 299     $alignment = 8;
 300     $type = ".xword";
 301     $ld .= " -m elf64_sparc";
 302     $cc .= " -m64";
 303     $objcopy .= " -O elf64-sparc";
 304 } elsif ($arch eq "mips") {
 305     # To enable module support, we need to enable the -mlong-calls option
 306     # of gcc for module, after using this option, we can not get the real
 307     # offset of the calling to _mcount, but the offset of the lui
 308     # instruction or the addiu one. herein, we record the address of the
 309     # first one, and then we can replace this instruction by a branch
 310     # instruction to jump over the profiling function to filter the
 311     # indicated functions, or swith back to the lui instruction to trace
 312     # them, which means dynamic tracing.
 313     #
 314     #       c:  3c030000        lui     v1,0x0
 315     #                   c: R_MIPS_HI16  _mcount
 316     #                   c: R_MIPS_NONE  *ABS*
 317     #                   c: R_MIPS_NONE  *ABS*
 318     #      10:  64630000        daddiu  v1,v1,0
 319     #                   10: R_MIPS_LO16 _mcount
 320     #                   10: R_MIPS_NONE *ABS*
 321     #                   10: R_MIPS_NONE *ABS*
 322     #      14:  03e0082d        move    at,ra
 323     #      18:  0060f809        jalr    v1
 324     #
 325     # for the kernel:
 326     #
 327     #     10:   03e0082d        move    at,ra
 328     #     14:   0c000000        jal     0 <loongson_halt>
 329     #                    14: R_MIPS_26   _mcount
 330     #                    14: R_MIPS_NONE *ABS*
 331     #                    14: R_MIPS_NONE *ABS*
 332     #    18:   00020021        nop
 333     if ($is_module eq "0") {
 334             $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_26\\s+_mcount\$";
 335     } else {
 336             $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_HI16\\s+_mcount\$";
 337     }
 338     $objdump .= " -Melf-trad".$endian."mips ";
 339
 340     if ($endian eq "big") {
 341             $endian = " -EB ";
 342             $ld .= " -melf".$bits."btsmip";
 343     } else {
 344             $endian = " -EL ";
 345             $ld .= " -melf".$bits."ltsmip";
 346     }
 347
 348     $cc .= " -mno-abicalls -fno-pic -mabi=" . $bits . $endian;
 349     $ld .= $endian;
 350
 351     if ($bits == 64) {
 352             $function_regex =
 353                 "^([0-9a-fA-F]+)\\s+<(.|[^\$]L.*?|\$[^L].*?|[^\$][^L].*?)>:";
 354             $type = ".dword";
 355     }
 356 } elsif ($arch eq "microblaze") {
 357     # Microblaze calls '_mcount' instead of plain 'mcount'.
 358     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
 359 } elsif ($arch eq "blackfin") {
 360     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s__mcount\$";
 361     $mcount_adjust = -4;
 362 } else {
 363     die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
 364 }
 365
 366 my $text_found = 0;
 367 my $read_function = 0;
 368 my $opened = 0;
 369 my $mcount_section = "__mcount_loc";
 370
 371 my $dirname;
 372 my $filename;
 373 my $prefix;
 374 my $ext;
 375
 376 if ($inputfile =~ m,^(.*)/([^/]*)$,) {
 377     $dirname = $1;
 378     $filename = $2;
 379 } else {
 380     $dirname = ".";
 381     $filename = $inputfile;
 382 }
 383
 384 if ($filename =~ m,^(.*)(\.\S),) {
 385     $prefix = $1;
 386     $ext = $2;
 387 } else {
 388     $prefix = $filename;
 389     $ext = "";
 390 }
 391
 392 my $mcount_s = $dirname . "/.tmp_mc_" . $prefix . ".s";
 393 my $mcount_o = $dirname . "/.tmp_mc_" . $prefix . ".o";
 394
 395 check_objcopy();
 396
 397 #
 398 # Step 1: find all the local (static functions) and weak symbols.
 399 #         't' is local, 'w/W' is weak
 400 #
 401 open (IN, "$nm $inputfile|") || die "error running $nm";
 402 while (<IN>) {
 403     if (/$local_regex/) {
 404         $locals{$1} = 1;
 405     } elsif (/$weak_regex/) {
 406         $weak{$2} = $1;
 407     }
 408 }
 409 close(IN);
 410
 411 my @offsets;            # Array of offsets of mcount callers
 412 my $ref_func;           # reference function to use for offsets
 413 my $offset = 0;         # offset of ref_func to section beginning
 414
 415 ##
 416 # update_funcs - print out the current mcount callers
 417 #
 418 #  Go through the list of offsets to callers and write them to
 419 #  the output file in a format that can be read by an assembler.
 420 #
 421 sub update_funcs
 422 {
 423     return unless ($ref_func and @offsets);
 424
 425     # Sanity check on weak function. A weak function may be overwritten by
 426     # another function of the same name, making all these offsets incorrect.
 427     if (defined $weak{$ref_func}) {
 428         die "$inputfile: ERROR: referencing weak function" .
 429             " $ref_func for mcount\n";
 430     }
 431
 432     # is this function static? If so, note this fact.
 433     if (defined $locals{$ref_func}) {
 434
 435         # only use locals if objcopy supports globalize-symbols
 436         if (!$can_use_local) {
 437             return;
 438         }
 439         $convert{$ref_func} = 1;
 440     }
 441
 442     # Loop through all the mcount caller offsets and print a reference
 443     # to the caller based from the ref_func.
 444     if (!$opened) {
 445         open(FILE, ">$mcount_s") || die "can't create $mcount_s\n";
 446         $opened = 1;
 447         print FILE "\t.section $mcount_section,\"a\",$section_type\n";
 448         print FILE "\t.align $alignment\n" if (defined($alignment));
 449     }
 450     foreach my $cur_offset (@offsets) {
 451         printf FILE "\t%s %s + %d\n", $type, $ref_func, $cur_offset - $offset;
 452     }
 453 }
 454
 455 #
 456 # Step 2: find the sections and mcount call sites
 457 #
 458 open(IN, "$objdump -hdr $inputfile|") || die "error running $objdump";
 459
 460 my $text;
 461
 462
 463 # read headers first
 464 my $read_headers = 1;
 465
 466 while (<IN>) {
 467
 468     if ($read_headers && /$mcount_section/) {
 469         #
 470         # Somehow the make process can execute this script on an
 471         # object twice. If it does, we would duplicate the mcount
 472         # section and it will cause the function tracer self test
 473         # to fail. Check if the mcount section exists, and if it does,
 474         # warn and exit.
 475         #
 476         print STDERR "ERROR: $mcount_section already in $inputfile\n" .
 477             "\tThis may be an indication that your build is corrupted.\n" .
 478             "\tDelete $inputfile and try again. If the same object file\n" .
 479             "\tstill causes an issue, then disable CONFIG_DYNAMIC_FTRACE.\n";
 480         exit(-1);
 481     }
 482
 483     # is it a section?
 484     if (/$section_regex/) {
 485         $read_headers = 0;
 486
 487         # Only record text sections that we know are safe
 488         $read_function = defined($text_sections{$1});
 489         # print out any recorded offsets
 490         update_funcs();
 491
 492         # reset all markers and arrays
 493         $text_found = 0;
 494         undef($ref_func);
 495         undef(@offsets);
 496
 497     # section found, now is this a start of a function?
 498     } elsif ($read_function && /$function_regex/) {
 499         $text_found = 1;
 500         $text = $2;
 501
 502         # if this is either a local function or a weak function
 503         # keep looking for functions that are global that
 504         # we can use safely.
 505         if (!defined($locals{$text}) && !defined($weak{$text})) {
 506             $ref_func = $text;
 507             $read_function = 0;
 508             $offset = hex $1;
 509         } else {
 510             # if we already have a function, and this is weak, skip it
 511             if (!defined($ref_func) && !defined($weak{$text}) &&
 512                  # PPC64 can have symbols that start with .L and
 513                  # gcc considers these special. Don't use them!
 514                  $text !~ /^\.L/) {
 515                 $ref_func = $text;
 516                 $offset = hex $1;
 517             }
 518         }
 519     }
 520     # is this a call site to mcount? If so, record it to print later
 521     if ($text_found && /$mcount_regex/) {
 522         push(@offsets, (hex $1) + $mcount_adjust);
 523     }
 524 }
 525
 526 # dump out anymore offsets that may have been found
 527 update_funcs();
 528
 529 # If we did not find any mcount callers, we are done (do nothing).
 530 if (!$opened) {
 531     exit(0);
 532 }
 533
 534 close(FILE);
 535
 536 #
 537 # Step 3: Compile the file that holds the list of call sites to mcount.
 538 #
 539 `$cc -o $mcount_o -c $mcount_s`;
 540
 541 my @converts = keys %convert;
 542
 543 #
 544 # Step 4: Do we have sections that started with local functions?
 545 #
 546 if ($#converts >= 0) {
 547     my $globallist = "";
 548     my $locallist = "";
 549
 550     foreach my $con (@converts) {
 551         $globallist .= " --globalize-symbol $con";
 552         $locallist .= " --localize-symbol $con";
 553     }
 554
 555     my $globalobj = $dirname . "/.tmp_gl_" . $filename;
 556     my $globalmix = $dirname . "/.tmp_mx_" . $filename;
 557
 558     #
 559     # Step 5: set up each local function as a global
 560     #
 561     `$objcopy $globallist $inputfile $globalobj`;
 562
 563     #
 564     # Step 6: Link the global version to our list.
 565     #
 566     `$ld -r $globalobj $mcount_o -o $globalmix`;
 567
 568     #
 569     # Step 7: Convert the local functions back into local symbols
 570     #
 571     `$objcopy $locallist $globalmix $inputfile`;
 572
 573     # Remove the temp files
 574     `$rm $globalobj $globalmix`;
 575
 576 } else {
 577
 578     my $mix = $dirname . "/.tmp_mx_" . $filename;
 579
 580     #
 581     # Step 8: Link the object with our list of call sites object.
 582     #
 583     `$ld -r $inputfile $mcount_o -o $mix`;
 584
 585     #
 586     # Step 9: Move the result back to the original object.
 587     #
 588     `$mv $mix $inputfile`;
 589 }
 590
 591 # Clean up the temp files
 592 `$rm $mcount_o $mcount_s`;
 593
 594 exit(0);