2 * sata_mv.c - Marvell SATA support
4 * Copyright 2008-2009: Marvell Corporation, all rights reserved.
5 * Copyright 2005: EMC Corporation, all rights reserved.
6 * Copyright 2005 Red Hat, Inc. All rights reserved.
8 * Originally written by Brett Russ.
9 * Extensive overhaul and enhancement by Mark Lord <mlord@pobox.com>.
11 * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; version 2 of the License.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
31 * --> Develop a low-power-consumption strategy, and implement it.
33 * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds.
35 * --> [Experiment, Marvell value added] Is it possible to use target
36 * mode to cross-connect two Linux boxes with Marvell cards? If so,
37 * creating LibATA target mode support would be very interesting.
39 * Target mode, for those without docs, is the ability to directly
40 * connect two SATA ports.
44 * 80x1-B2 errata PCI#11:
46 * Users of the 6041/6081 Rev.B2 chips (current is C0)
47 * should be careful to insert those cards only onto PCI-X bus #0,
48 * and only in device slots 0..7, not higher. The chips may not
49 * work correctly otherwise (note: this is a pretty rare condition).
52 #include <linux/kernel.h>
53 #include <linux/module.h>
54 #include <linux/pci.h>
55 #include <linux/init.h>
56 #include <linux/blkdev.h>
57 #include <linux/delay.h>
58 #include <linux/interrupt.h>
59 #include <linux/dmapool.h>
60 #include <linux/dma-mapping.h>
61 #include <linux/device.h>
62 #include <linux/clk.h>
63 #include <linux/platform_device.h>
64 #include <linux/ata_platform.h>
65 #include <linux/mbus.h>
66 #include <linux/bitops.h>
67 #include <linux/gfp.h>
68 #include <scsi/scsi_host.h>
69 #include <scsi/scsi_cmnd.h>
70 #include <scsi/scsi_device.h>
71 #include <linux/libata.h>
73 #define DRV_NAME "sata_mv"
74 #define DRV_VERSION "1.28"
82 module_param(msi
, int, S_IRUGO
);
83 MODULE_PARM_DESC(msi
, "Enable use of PCI MSI (0=off, 1=on)");
86 static int irq_coalescing_io_count
;
87 module_param(irq_coalescing_io_count
, int, S_IRUGO
);
88 MODULE_PARM_DESC(irq_coalescing_io_count
,
89 "IRQ coalescing I/O count threshold (0..255)");
91 static int irq_coalescing_usecs
;
92 module_param(irq_coalescing_usecs
, int, S_IRUGO
);
93 MODULE_PARM_DESC(irq_coalescing_usecs
,
94 "IRQ coalescing time threshold in usecs");
97 /* BAR's are enumerated in terms of pci_resource_start() terms */
98 MV_PRIMARY_BAR
= 0, /* offset 0x10: memory space */
99 MV_IO_BAR
= 2, /* offset 0x18: IO space */
100 MV_MISC_BAR
= 3, /* offset 0x1c: FLASH, NVRAM, SRAM */
102 MV_MAJOR_REG_AREA_SZ
= 0x10000, /* 64KB */
103 MV_MINOR_REG_AREA_SZ
= 0x2000, /* 8KB */
105 /* For use with both IRQ coalescing methods ("all ports" or "per-HC" */
106 COAL_CLOCKS_PER_USEC
= 150, /* for calculating COAL_TIMEs */
107 MAX_COAL_TIME_THRESHOLD
= ((1 << 24) - 1), /* internal clocks count */
108 MAX_COAL_IO_COUNT
= 255, /* completed I/O count */
113 * Per-chip ("all ports") interrupt coalescing feature.
114 * This is only for GEN_II / GEN_IIE hardware.
116 * Coalescing defers the interrupt until either the IO_THRESHOLD
117 * (count of completed I/Os) is met, or the TIME_THRESHOLD is met.
119 COAL_REG_BASE
= 0x18000,
120 IRQ_COAL_CAUSE
= (COAL_REG_BASE
+ 0x08),
121 ALL_PORTS_COAL_IRQ
= (1 << 4), /* all ports irq event */
123 IRQ_COAL_IO_THRESHOLD
= (COAL_REG_BASE
+ 0xcc),
124 IRQ_COAL_TIME_THRESHOLD
= (COAL_REG_BASE
+ 0xd0),
127 * Registers for the (unused here) transaction coalescing feature:
129 TRAN_COAL_CAUSE_LO
= (COAL_REG_BASE
+ 0x88),
130 TRAN_COAL_CAUSE_HI
= (COAL_REG_BASE
+ 0x8c),
132 SATAHC0_REG_BASE
= 0x20000,
134 GPIO_PORT_CTL
= 0x104f0,
137 MV_PCI_REG_SZ
= MV_MAJOR_REG_AREA_SZ
,
138 MV_SATAHC_REG_SZ
= MV_MAJOR_REG_AREA_SZ
,
139 MV_SATAHC_ARBTR_REG_SZ
= MV_MINOR_REG_AREA_SZ
, /* arbiter */
140 MV_PORT_REG_SZ
= MV_MINOR_REG_AREA_SZ
,
143 MV_MAX_Q_DEPTH_MASK
= MV_MAX_Q_DEPTH
- 1,
145 /* CRQB needs alignment on a 1KB boundary. Size == 1KB
146 * CRPB needs alignment on a 256B boundary. Size == 256B
147 * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
149 MV_CRQB_Q_SZ
= (32 * MV_MAX_Q_DEPTH
),
150 MV_CRPB_Q_SZ
= (8 * MV_MAX_Q_DEPTH
),
152 MV_SG_TBL_SZ
= (16 * MV_MAX_SG_CT
),
154 /* Determine hc from 0-7 port: hc = port >> MV_PORT_HC_SHIFT */
155 MV_PORT_HC_SHIFT
= 2,
156 MV_PORTS_PER_HC
= (1 << MV_PORT_HC_SHIFT
), /* 4 */
157 /* Determine hc port from 0-7 port: hardport = port & MV_PORT_MASK */
158 MV_PORT_MASK
= (MV_PORTS_PER_HC
- 1), /* 3 */
161 MV_FLAG_DUAL_HC
= (1 << 30), /* two SATA Host Controllers */
163 MV_COMMON_FLAGS
= ATA_FLAG_SATA
| ATA_FLAG_NO_LEGACY
|
164 ATA_FLAG_MMIO
| ATA_FLAG_PIO_POLLING
,
166 MV_GEN_I_FLAGS
= MV_COMMON_FLAGS
| ATA_FLAG_NO_ATAPI
,
168 MV_GEN_II_FLAGS
= MV_COMMON_FLAGS
| ATA_FLAG_NCQ
|
169 ATA_FLAG_PMP
| ATA_FLAG_ACPI_SATA
,
171 MV_GEN_IIE_FLAGS
= MV_GEN_II_FLAGS
| ATA_FLAG_AN
,
173 CRQB_FLAG_READ
= (1 << 0),
175 CRQB_IOID_SHIFT
= 6, /* CRQB Gen-II/IIE IO Id shift */
176 CRQB_PMP_SHIFT
= 12, /* CRQB Gen-II/IIE PMP shift */
177 CRQB_HOSTQ_SHIFT
= 17, /* CRQB Gen-II/IIE HostQueTag shift */
178 CRQB_CMD_ADDR_SHIFT
= 8,
179 CRQB_CMD_CS
= (0x2 << 11),
180 CRQB_CMD_LAST
= (1 << 15),
182 CRPB_FLAG_STATUS_SHIFT
= 8,
183 CRPB_IOID_SHIFT_6
= 5, /* CRPB Gen-II IO Id shift */
184 CRPB_IOID_SHIFT_7
= 7, /* CRPB Gen-IIE IO Id shift */
186 EPRD_FLAG_END_OF_TBL
= (1 << 31),
188 /* PCI interface registers */
190 MV_PCI_COMMAND
= 0xc00,
191 MV_PCI_COMMAND_MWRCOM
= (1 << 4), /* PCI Master Write Combining */
192 MV_PCI_COMMAND_MRDTRIG
= (1 << 7), /* PCI Master Read Trigger */
194 PCI_MAIN_CMD_STS
= 0xd30,
195 STOP_PCI_MASTER
= (1 << 2),
196 PCI_MASTER_EMPTY
= (1 << 3),
197 GLOB_SFT_RST
= (1 << 4),
200 MV_PCI_MODE_MASK
= 0x30,
202 MV_PCI_EXP_ROM_BAR_CTL
= 0xd2c,
203 MV_PCI_DISC_TIMER
= 0xd04,
204 MV_PCI_MSI_TRIGGER
= 0xc38,
205 MV_PCI_SERR_MASK
= 0xc28,
206 MV_PCI_XBAR_TMOUT
= 0x1d04,
207 MV_PCI_ERR_LOW_ADDRESS
= 0x1d40,
208 MV_PCI_ERR_HIGH_ADDRESS
= 0x1d44,
209 MV_PCI_ERR_ATTRIBUTE
= 0x1d48,
210 MV_PCI_ERR_COMMAND
= 0x1d50,
212 PCI_IRQ_CAUSE
= 0x1d58,
213 PCI_IRQ_MASK
= 0x1d5c,
214 PCI_UNMASK_ALL_IRQS
= 0x7fffff, /* bits 22-0 */
216 PCIE_IRQ_CAUSE
= 0x1900,
217 PCIE_IRQ_MASK
= 0x1910,
218 PCIE_UNMASK_ALL_IRQS
= 0x40a, /* assorted bits */
220 /* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */
221 PCI_HC_MAIN_IRQ_CAUSE
= 0x1d60,
222 PCI_HC_MAIN_IRQ_MASK
= 0x1d64,
223 SOC_HC_MAIN_IRQ_CAUSE
= 0x20020,
224 SOC_HC_MAIN_IRQ_MASK
= 0x20024,
225 ERR_IRQ
= (1 << 0), /* shift by (2 * port #) */
226 DONE_IRQ
= (1 << 1), /* shift by (2 * port #) */
227 HC0_IRQ_PEND
= 0x1ff, /* bits 0-8 = HC0's ports */
228 HC_SHIFT
= 9, /* bits 9-17 = HC1's ports */
229 DONE_IRQ_0_3
= 0x000000aa, /* DONE_IRQ ports 0,1,2,3 */
230 DONE_IRQ_4_7
= (DONE_IRQ_0_3
<< HC_SHIFT
), /* 4,5,6,7 */
232 TRAN_COAL_LO_DONE
= (1 << 19), /* transaction coalescing */
233 TRAN_COAL_HI_DONE
= (1 << 20), /* transaction coalescing */
234 PORTS_0_3_COAL_DONE
= (1 << 8), /* HC0 IRQ coalescing */
235 PORTS_4_7_COAL_DONE
= (1 << 17), /* HC1 IRQ coalescing */
236 ALL_PORTS_COAL_DONE
= (1 << 21), /* GEN_II(E) IRQ coalescing */
237 GPIO_INT
= (1 << 22),
238 SELF_INT
= (1 << 23),
239 TWSI_INT
= (1 << 24),
240 HC_MAIN_RSVD
= (0x7f << 25), /* bits 31-25 */
241 HC_MAIN_RSVD_5
= (0x1fff << 19), /* bits 31-19 */
242 HC_MAIN_RSVD_SOC
= (0x3fffffb << 6), /* bits 31-9, 7-6 */
244 /* SATAHC registers */
248 DMA_IRQ
= (1 << 0), /* shift by port # */
249 HC_COAL_IRQ
= (1 << 4), /* IRQ coalescing */
250 DEV_IRQ
= (1 << 8), /* shift by port # */
253 * Per-HC (Host-Controller) interrupt coalescing feature.
254 * This is present on all chip generations.
256 * Coalescing defers the interrupt until either the IO_THRESHOLD
257 * (count of completed I/Os) is met, or the TIME_THRESHOLD is met.
259 HC_IRQ_COAL_IO_THRESHOLD
= 0x000c,
260 HC_IRQ_COAL_TIME_THRESHOLD
= 0x0010,
263 SOC_LED_CTRL_BLINK
= (1 << 0), /* Active LED blink */
264 SOC_LED_CTRL_ACT_PRESENCE
= (1 << 2), /* Multiplex dev presence */
265 /* with dev activity LED */
267 /* Shadow block registers */
269 SHD_CTL_AST
= 0x20, /* ofs from SHD_BLK */
272 SATA_STATUS
= 0x300, /* ctrl, err regs follow status */
274 FIS_IRQ_CAUSE
= 0x364,
275 FIS_IRQ_CAUSE_AN
= (1 << 9), /* async notification */
277 LTMODE
= 0x30c, /* requires read-after-write */
278 LTMODE_BIT8
= (1 << 8), /* unknown, but necessary */
283 PHY_MODE4
= 0x314, /* requires read-after-write */
284 PHY_MODE4_CFG_MASK
= 0x00000003, /* phy internal config field */
285 PHY_MODE4_CFG_VALUE
= 0x00000001, /* phy internal config field */
286 PHY_MODE4_RSVD_ZEROS
= 0x5de3fffa, /* Gen2e always write zeros */
287 PHY_MODE4_RSVD_ONES
= 0x00000005, /* Gen2e always write ones */
290 SATA_TESTCTL
= 0x348,
292 VENDOR_UNIQUE_FIS
= 0x35c,
295 FISCFG_WAIT_DEV_ERR
= (1 << 8), /* wait for host on DevErr */
296 FISCFG_SINGLE_SYNC
= (1 << 16), /* SYNC on DMA activation */
298 PHY_MODE9_GEN2
= 0x398,
299 PHY_MODE9_GEN1
= 0x39c,
300 PHYCFG_OFS
= 0x3a0, /* only in 65n devices */
307 MV_M2_PREAMP_MASK
= 0x7e0,
311 EDMA_CFG_Q_DEPTH
= 0x1f, /* max device queue depth */
312 EDMA_CFG_NCQ
= (1 << 5), /* for R/W FPDMA queued */
313 EDMA_CFG_NCQ_GO_ON_ERR
= (1 << 14), /* continue on error */
314 EDMA_CFG_RD_BRST_EXT
= (1 << 11), /* read burst 512B */
315 EDMA_CFG_WR_BUFF_LEN
= (1 << 13), /* write buffer 512B */
316 EDMA_CFG_EDMA_FBS
= (1 << 16), /* EDMA FIS-Based Switching */
317 EDMA_CFG_FBS
= (1 << 26), /* FIS-Based Switching */
319 EDMA_ERR_IRQ_CAUSE
= 0x8,
320 EDMA_ERR_IRQ_MASK
= 0xc,
321 EDMA_ERR_D_PAR
= (1 << 0), /* UDMA data parity err */
322 EDMA_ERR_PRD_PAR
= (1 << 1), /* UDMA PRD parity err */
323 EDMA_ERR_DEV
= (1 << 2), /* device error */
324 EDMA_ERR_DEV_DCON
= (1 << 3), /* device disconnect */
325 EDMA_ERR_DEV_CON
= (1 << 4), /* device connected */
326 EDMA_ERR_SERR
= (1 << 5), /* SError bits [WBDST] raised */
327 EDMA_ERR_SELF_DIS
= (1 << 7), /* Gen II/IIE self-disable */
328 EDMA_ERR_SELF_DIS_5
= (1 << 8), /* Gen I self-disable */
329 EDMA_ERR_BIST_ASYNC
= (1 << 8), /* BIST FIS or Async Notify */
330 EDMA_ERR_TRANS_IRQ_7
= (1 << 8), /* Gen IIE transprt layer irq */
331 EDMA_ERR_CRQB_PAR
= (1 << 9), /* CRQB parity error */
332 EDMA_ERR_CRPB_PAR
= (1 << 10), /* CRPB parity error */
333 EDMA_ERR_INTRL_PAR
= (1 << 11), /* internal parity error */
334 EDMA_ERR_IORDY
= (1 << 12), /* IORdy timeout */
336 EDMA_ERR_LNK_CTRL_RX
= (0xf << 13), /* link ctrl rx error */
337 EDMA_ERR_LNK_CTRL_RX_0
= (1 << 13), /* transient: CRC err */
338 EDMA_ERR_LNK_CTRL_RX_1
= (1 << 14), /* transient: FIFO err */
339 EDMA_ERR_LNK_CTRL_RX_2
= (1 << 15), /* fatal: caught SYNC */
340 EDMA_ERR_LNK_CTRL_RX_3
= (1 << 16), /* transient: FIS rx err */
342 EDMA_ERR_LNK_DATA_RX
= (0xf << 17), /* link data rx error */
344 EDMA_ERR_LNK_CTRL_TX
= (0x1f << 21), /* link ctrl tx error */
345 EDMA_ERR_LNK_CTRL_TX_0
= (1 << 21), /* transient: CRC err */
346 EDMA_ERR_LNK_CTRL_TX_1
= (1 << 22), /* transient: FIFO err */
347 EDMA_ERR_LNK_CTRL_TX_2
= (1 << 23), /* transient: caught SYNC */
348 EDMA_ERR_LNK_CTRL_TX_3
= (1 << 24), /* transient: caught DMAT */
349 EDMA_ERR_LNK_CTRL_TX_4
= (1 << 25), /* transient: FIS collision */
351 EDMA_ERR_LNK_DATA_TX
= (0x1f << 26), /* link data tx error */
353 EDMA_ERR_TRANS_PROTO
= (1 << 31), /* transport protocol error */
354 EDMA_ERR_OVERRUN_5
= (1 << 5),
355 EDMA_ERR_UNDERRUN_5
= (1 << 6),
357 EDMA_ERR_IRQ_TRANSIENT
= EDMA_ERR_LNK_CTRL_RX_0
|
358 EDMA_ERR_LNK_CTRL_RX_1
|
359 EDMA_ERR_LNK_CTRL_RX_3
|
360 EDMA_ERR_LNK_CTRL_TX
,
362 EDMA_EH_FREEZE
= EDMA_ERR_D_PAR
|
372 EDMA_ERR_LNK_CTRL_RX_2
|
373 EDMA_ERR_LNK_DATA_RX
|
374 EDMA_ERR_LNK_DATA_TX
|
375 EDMA_ERR_TRANS_PROTO
,
377 EDMA_EH_FREEZE_5
= EDMA_ERR_D_PAR
|
382 EDMA_ERR_UNDERRUN_5
|
383 EDMA_ERR_SELF_DIS_5
|
389 EDMA_REQ_Q_BASE_HI
= 0x10,
390 EDMA_REQ_Q_IN_PTR
= 0x14, /* also contains BASE_LO */
392 EDMA_REQ_Q_OUT_PTR
= 0x18,
393 EDMA_REQ_Q_PTR_SHIFT
= 5,
395 EDMA_RSP_Q_BASE_HI
= 0x1c,
396 EDMA_RSP_Q_IN_PTR
= 0x20,
397 EDMA_RSP_Q_OUT_PTR
= 0x24, /* also contains BASE_LO */
398 EDMA_RSP_Q_PTR_SHIFT
= 3,
400 EDMA_CMD
= 0x28, /* EDMA command register */
401 EDMA_EN
= (1 << 0), /* enable EDMA */
402 EDMA_DS
= (1 << 1), /* disable EDMA; self-negated */
403 EDMA_RESET
= (1 << 2), /* reset eng/trans/link/phy */
405 EDMA_STATUS
= 0x30, /* EDMA engine status */
406 EDMA_STATUS_CACHE_EMPTY
= (1 << 6), /* GenIIe command cache empty */
407 EDMA_STATUS_IDLE
= (1 << 7), /* GenIIe EDMA enabled/idle */
409 EDMA_IORDY_TMOUT
= 0x34,
412 EDMA_HALTCOND
= 0x60, /* GenIIe halt conditions */
413 EDMA_UNKNOWN_RSVD
= 0x6C, /* GenIIe unknown/reserved */
415 BMDMA_CMD
= 0x224, /* bmdma command register */
416 BMDMA_STATUS
= 0x228, /* bmdma status register */
417 BMDMA_PRD_LOW
= 0x22c, /* bmdma PRD addr 31:0 */
418 BMDMA_PRD_HIGH
= 0x230, /* bmdma PRD addr 63:32 */
420 /* Host private flags (hp_flags) */
421 MV_HP_FLAG_MSI
= (1 << 0),
422 MV_HP_ERRATA_50XXB0
= (1 << 1),
423 MV_HP_ERRATA_50XXB2
= (1 << 2),
424 MV_HP_ERRATA_60X1B2
= (1 << 3),
425 MV_HP_ERRATA_60X1C0
= (1 << 4),
426 MV_HP_GEN_I
= (1 << 6), /* Generation I: 50xx */
427 MV_HP_GEN_II
= (1 << 7), /* Generation II: 60xx */
428 MV_HP_GEN_IIE
= (1 << 8), /* Generation IIE: 6042/7042 */
429 MV_HP_PCIE
= (1 << 9), /* PCIe bus/regs: 7042 */
430 MV_HP_CUT_THROUGH
= (1 << 10), /* can use EDMA cut-through */
431 MV_HP_FLAG_SOC
= (1 << 11), /* SystemOnChip, no PCI */
432 MV_HP_QUIRK_LED_BLINK_EN
= (1 << 12), /* is led blinking enabled? */
434 /* Port private flags (pp_flags) */
435 MV_PP_FLAG_EDMA_EN
= (1 << 0), /* is EDMA engine enabled? */
436 MV_PP_FLAG_NCQ_EN
= (1 << 1), /* is EDMA set up for NCQ? */
437 MV_PP_FLAG_FBS_EN
= (1 << 2), /* is EDMA set up for FBS? */
438 MV_PP_FLAG_DELAYED_EH
= (1 << 3), /* delayed dev err handling */
439 MV_PP_FLAG_FAKE_ATA_BUSY
= (1 << 4), /* ignore initial ATA_DRDY */
442 #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
443 #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
444 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
445 #define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
446 #define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC)
448 #define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
449 #define WINDOW_BASE(i) (0x20034 + ((i) << 4))
452 /* DMA boundary 0xffff is required by the s/g splitting
453 * we need on /length/ in mv_fill-sg().
455 MV_DMA_BOUNDARY
= 0xffffU
,
457 /* mask of register bits containing lower 32 bits
458 * of EDMA request queue DMA address
460 EDMA_REQ_Q_BASE_LO_MASK
= 0xfffffc00U
,
462 /* ditto, for response queue */
463 EDMA_RSP_Q_BASE_LO_MASK
= 0xffffff00U
,
477 /* Command ReQuest Block: 32B */
493 /* Command ResPonse Block: 8B */
500 /* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */
509 * We keep a local cache of a few frequently accessed port
510 * registers here, to avoid having to read them (very slow)
511 * when switching between EDMA and non-EDMA modes.
513 struct mv_cached_regs
{
520 struct mv_port_priv
{
521 struct mv_crqb
*crqb
;
523 struct mv_crpb
*crpb
;
525 struct mv_sg
*sg_tbl
[MV_MAX_Q_DEPTH
];
526 dma_addr_t sg_tbl_dma
[MV_MAX_Q_DEPTH
];
528 unsigned int req_idx
;
529 unsigned int resp_idx
;
532 struct mv_cached_regs cached
;
533 unsigned int delayed_eh_pmp_map
;
536 struct mv_port_signal
{
541 struct mv_host_priv
{
543 unsigned int board_idx
;
545 struct mv_port_signal signal
[8];
546 const struct mv_hw_ops
*ops
;
549 void __iomem
*main_irq_cause_addr
;
550 void __iomem
*main_irq_mask_addr
;
551 u32 irq_cause_offset
;
555 #if defined(CONFIG_HAVE_CLK)
559 * These consistent DMA memory pools give us guaranteed
560 * alignment for hardware-accessed data structures,
561 * and less memory waste in accomplishing the alignment.
563 struct dma_pool
*crqb_pool
;
564 struct dma_pool
*crpb_pool
;
565 struct dma_pool
*sg_tbl_pool
;
569 void (*phy_errata
)(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
571 void (*enable_leds
)(struct mv_host_priv
*hpriv
, void __iomem
*mmio
);
572 void (*read_preamp
)(struct mv_host_priv
*hpriv
, int idx
,
574 int (*reset_hc
)(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
576 void (*reset_flash
)(struct mv_host_priv
*hpriv
, void __iomem
*mmio
);
577 void (*reset_bus
)(struct ata_host
*host
, void __iomem
*mmio
);
580 static int mv_scr_read(struct ata_link
*link
, unsigned int sc_reg_in
, u32
*val
);
581 static int mv_scr_write(struct ata_link
*link
, unsigned int sc_reg_in
, u32 val
);
582 static int mv5_scr_read(struct ata_link
*link
, unsigned int sc_reg_in
, u32
*val
);
583 static int mv5_scr_write(struct ata_link
*link
, unsigned int sc_reg_in
, u32 val
);
584 static int mv_port_start(struct ata_port
*ap
);
585 static void mv_port_stop(struct ata_port
*ap
);
586 static int mv_qc_defer(struct ata_queued_cmd
*qc
);
587 static void mv_qc_prep(struct ata_queued_cmd
*qc
);
588 static void mv_qc_prep_iie(struct ata_queued_cmd
*qc
);
589 static unsigned int mv_qc_issue(struct ata_queued_cmd
*qc
);
590 static int mv_hardreset(struct ata_link
*link
, unsigned int *class,
591 unsigned long deadline
);
592 static void mv_eh_freeze(struct ata_port
*ap
);
593 static void mv_eh_thaw(struct ata_port
*ap
);
594 static void mv6_dev_config(struct ata_device
*dev
);
596 static void mv5_phy_errata(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
598 static void mv5_enable_leds(struct mv_host_priv
*hpriv
, void __iomem
*mmio
);
599 static void mv5_read_preamp(struct mv_host_priv
*hpriv
, int idx
,
601 static int mv5_reset_hc(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
603 static void mv5_reset_flash(struct mv_host_priv
*hpriv
, void __iomem
*mmio
);
604 static void mv5_reset_bus(struct ata_host
*host
, void __iomem
*mmio
);
606 static void mv6_phy_errata(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
608 static void mv6_enable_leds(struct mv_host_priv
*hpriv
, void __iomem
*mmio
);
609 static void mv6_read_preamp(struct mv_host_priv
*hpriv
, int idx
,
611 static int mv6_reset_hc(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
613 static void mv6_reset_flash(struct mv_host_priv
*hpriv
, void __iomem
*mmio
);
614 static void mv_soc_enable_leds(struct mv_host_priv
*hpriv
,
616 static void mv_soc_read_preamp(struct mv_host_priv
*hpriv
, int idx
,
618 static int mv_soc_reset_hc(struct mv_host_priv
*hpriv
,
619 void __iomem
*mmio
, unsigned int n_hc
);
620 static void mv_soc_reset_flash(struct mv_host_priv
*hpriv
,
622 static void mv_soc_reset_bus(struct ata_host
*host
, void __iomem
*mmio
);
623 static void mv_soc_65n_phy_errata(struct mv_host_priv
*hpriv
,
624 void __iomem
*mmio
, unsigned int port
);
625 static void mv_reset_pci_bus(struct ata_host
*host
, void __iomem
*mmio
);
626 static void mv_reset_channel(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
627 unsigned int port_no
);
628 static int mv_stop_edma(struct ata_port
*ap
);
629 static int mv_stop_edma_engine(void __iomem
*port_mmio
);
630 static void mv_edma_cfg(struct ata_port
*ap
, int want_ncq
, int want_edma
);
632 static void mv_pmp_select(struct ata_port
*ap
, int pmp
);
633 static int mv_pmp_hardreset(struct ata_link
*link
, unsigned int *class,
634 unsigned long deadline
);
635 static int mv_softreset(struct ata_link
*link
, unsigned int *class,
636 unsigned long deadline
);
637 static void mv_pmp_error_handler(struct ata_port
*ap
);
638 static void mv_process_crpb_entries(struct ata_port
*ap
,
639 struct mv_port_priv
*pp
);
641 static void mv_sff_irq_clear(struct ata_port
*ap
);
642 static int mv_check_atapi_dma(struct ata_queued_cmd
*qc
);
643 static void mv_bmdma_setup(struct ata_queued_cmd
*qc
);
644 static void mv_bmdma_start(struct ata_queued_cmd
*qc
);
645 static void mv_bmdma_stop(struct ata_queued_cmd
*qc
);
646 static u8
mv_bmdma_status(struct ata_port
*ap
);
647 static u8
mv_sff_check_status(struct ata_port
*ap
);
649 /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
650 * because we have to allow room for worst case splitting of
651 * PRDs for 64K boundaries in mv_fill_sg().
653 static struct scsi_host_template mv5_sht
= {
654 ATA_BASE_SHT(DRV_NAME
),
655 .sg_tablesize
= MV_MAX_SG_CT
/ 2,
656 .dma_boundary
= MV_DMA_BOUNDARY
,
659 static struct scsi_host_template mv6_sht
= {
660 ATA_NCQ_SHT(DRV_NAME
),
661 .can_queue
= MV_MAX_Q_DEPTH
- 1,
662 .sg_tablesize
= MV_MAX_SG_CT
/ 2,
663 .dma_boundary
= MV_DMA_BOUNDARY
,
666 static struct ata_port_operations mv5_ops
= {
667 .inherits
= &ata_sff_port_ops
,
669 .lost_interrupt
= ATA_OP_NULL
,
671 .qc_defer
= mv_qc_defer
,
672 .qc_prep
= mv_qc_prep
,
673 .qc_issue
= mv_qc_issue
,
675 .freeze
= mv_eh_freeze
,
677 .hardreset
= mv_hardreset
,
679 .scr_read
= mv5_scr_read
,
680 .scr_write
= mv5_scr_write
,
682 .port_start
= mv_port_start
,
683 .port_stop
= mv_port_stop
,
686 static struct ata_port_operations mv6_ops
= {
687 .inherits
= &ata_bmdma_port_ops
,
689 .lost_interrupt
= ATA_OP_NULL
,
691 .qc_defer
= mv_qc_defer
,
692 .qc_prep
= mv_qc_prep
,
693 .qc_issue
= mv_qc_issue
,
695 .dev_config
= mv6_dev_config
,
697 .freeze
= mv_eh_freeze
,
699 .hardreset
= mv_hardreset
,
700 .softreset
= mv_softreset
,
701 .pmp_hardreset
= mv_pmp_hardreset
,
702 .pmp_softreset
= mv_softreset
,
703 .error_handler
= mv_pmp_error_handler
,
705 .scr_read
= mv_scr_read
,
706 .scr_write
= mv_scr_write
,
708 .sff_check_status
= mv_sff_check_status
,
709 .sff_irq_clear
= mv_sff_irq_clear
,
710 .check_atapi_dma
= mv_check_atapi_dma
,
711 .bmdma_setup
= mv_bmdma_setup
,
712 .bmdma_start
= mv_bmdma_start
,
713 .bmdma_stop
= mv_bmdma_stop
,
714 .bmdma_status
= mv_bmdma_status
,
716 .port_start
= mv_port_start
,
717 .port_stop
= mv_port_stop
,
720 static struct ata_port_operations mv_iie_ops
= {
721 .inherits
= &mv6_ops
,
722 .dev_config
= ATA_OP_NULL
,
723 .qc_prep
= mv_qc_prep_iie
,
726 static const struct ata_port_info mv_port_info
[] = {
728 .flags
= MV_GEN_I_FLAGS
,
729 .pio_mask
= ATA_PIO4
,
730 .udma_mask
= ATA_UDMA6
,
731 .port_ops
= &mv5_ops
,
734 .flags
= MV_GEN_I_FLAGS
| MV_FLAG_DUAL_HC
,
735 .pio_mask
= ATA_PIO4
,
736 .udma_mask
= ATA_UDMA6
,
737 .port_ops
= &mv5_ops
,
740 .flags
= MV_GEN_I_FLAGS
| MV_FLAG_DUAL_HC
,
741 .pio_mask
= ATA_PIO4
,
742 .udma_mask
= ATA_UDMA6
,
743 .port_ops
= &mv5_ops
,
746 .flags
= MV_GEN_II_FLAGS
,
747 .pio_mask
= ATA_PIO4
,
748 .udma_mask
= ATA_UDMA6
,
749 .port_ops
= &mv6_ops
,
752 .flags
= MV_GEN_II_FLAGS
| MV_FLAG_DUAL_HC
,
753 .pio_mask
= ATA_PIO4
,
754 .udma_mask
= ATA_UDMA6
,
755 .port_ops
= &mv6_ops
,
758 .flags
= MV_GEN_IIE_FLAGS
,
759 .pio_mask
= ATA_PIO4
,
760 .udma_mask
= ATA_UDMA6
,
761 .port_ops
= &mv_iie_ops
,
764 .flags
= MV_GEN_IIE_FLAGS
,
765 .pio_mask
= ATA_PIO4
,
766 .udma_mask
= ATA_UDMA6
,
767 .port_ops
= &mv_iie_ops
,
770 .flags
= MV_GEN_IIE_FLAGS
,
771 .pio_mask
= ATA_PIO4
,
772 .udma_mask
= ATA_UDMA6
,
773 .port_ops
= &mv_iie_ops
,
777 static const struct pci_device_id mv_pci_tbl
[] = {
778 { PCI_VDEVICE(MARVELL
, 0x5040), chip_504x
},
779 { PCI_VDEVICE(MARVELL
, 0x5041), chip_504x
},
780 { PCI_VDEVICE(MARVELL
, 0x5080), chip_5080
},
781 { PCI_VDEVICE(MARVELL
, 0x5081), chip_508x
},
782 /* RocketRAID 1720/174x have different identifiers */
783 { PCI_VDEVICE(TTI
, 0x1720), chip_6042
},
784 { PCI_VDEVICE(TTI
, 0x1740), chip_6042
},
785 { PCI_VDEVICE(TTI
, 0x1742), chip_6042
},
787 { PCI_VDEVICE(MARVELL
, 0x6040), chip_604x
},
788 { PCI_VDEVICE(MARVELL
, 0x6041), chip_604x
},
789 { PCI_VDEVICE(MARVELL
, 0x6042), chip_6042
},
790 { PCI_VDEVICE(MARVELL
, 0x6080), chip_608x
},
791 { PCI_VDEVICE(MARVELL
, 0x6081), chip_608x
},
793 { PCI_VDEVICE(ADAPTEC2
, 0x0241), chip_604x
},
796 { PCI_VDEVICE(ADAPTEC2
, 0x0243), chip_7042
},
798 /* Marvell 7042 support */
799 { PCI_VDEVICE(MARVELL
, 0x7042), chip_7042
},
801 /* Highpoint RocketRAID PCIe series */
802 { PCI_VDEVICE(TTI
, 0x2300), chip_7042
},
803 { PCI_VDEVICE(TTI
, 0x2310), chip_7042
},
805 { } /* terminate list */
808 static const struct mv_hw_ops mv5xxx_ops
= {
809 .phy_errata
= mv5_phy_errata
,
810 .enable_leds
= mv5_enable_leds
,
811 .read_preamp
= mv5_read_preamp
,
812 .reset_hc
= mv5_reset_hc
,
813 .reset_flash
= mv5_reset_flash
,
814 .reset_bus
= mv5_reset_bus
,
817 static const struct mv_hw_ops mv6xxx_ops
= {
818 .phy_errata
= mv6_phy_errata
,
819 .enable_leds
= mv6_enable_leds
,
820 .read_preamp
= mv6_read_preamp
,
821 .reset_hc
= mv6_reset_hc
,
822 .reset_flash
= mv6_reset_flash
,
823 .reset_bus
= mv_reset_pci_bus
,
826 static const struct mv_hw_ops mv_soc_ops
= {
827 .phy_errata
= mv6_phy_errata
,
828 .enable_leds
= mv_soc_enable_leds
,
829 .read_preamp
= mv_soc_read_preamp
,
830 .reset_hc
= mv_soc_reset_hc
,
831 .reset_flash
= mv_soc_reset_flash
,
832 .reset_bus
= mv_soc_reset_bus
,
835 static const struct mv_hw_ops mv_soc_65n_ops
= {
836 .phy_errata
= mv_soc_65n_phy_errata
,
837 .enable_leds
= mv_soc_enable_leds
,
838 .reset_hc
= mv_soc_reset_hc
,
839 .reset_flash
= mv_soc_reset_flash
,
840 .reset_bus
= mv_soc_reset_bus
,
847 static inline void writelfl(unsigned long data
, void __iomem
*addr
)
850 (void) readl(addr
); /* flush to avoid PCI posted write */
853 static inline unsigned int mv_hc_from_port(unsigned int port
)
855 return port
>> MV_PORT_HC_SHIFT
;
858 static inline unsigned int mv_hardport_from_port(unsigned int port
)
860 return port
& MV_PORT_MASK
;
864 * Consolidate some rather tricky bit shift calculations.
865 * This is hot-path stuff, so not a function.
866 * Simple code, with two return values, so macro rather than inline.
868 * port is the sole input, in range 0..7.
869 * shift is one output, for use with main_irq_cause / main_irq_mask registers.
870 * hardport is the other output, in range 0..3.
872 * Note that port and hardport may be the same variable in some cases.
874 #define MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport) \
876 shift = mv_hc_from_port(port) * HC_SHIFT; \
877 hardport = mv_hardport_from_port(port); \
878 shift += hardport * 2; \
881 static inline void __iomem
*mv_hc_base(void __iomem
*base
, unsigned int hc
)
883 return (base
+ SATAHC0_REG_BASE
+ (hc
* MV_SATAHC_REG_SZ
));
886 static inline void __iomem
*mv_hc_base_from_port(void __iomem
*base
,
889 return mv_hc_base(base
, mv_hc_from_port(port
));
892 static inline void __iomem
*mv_port_base(void __iomem
*base
, unsigned int port
)
894 return mv_hc_base_from_port(base
, port
) +
895 MV_SATAHC_ARBTR_REG_SZ
+
896 (mv_hardport_from_port(port
) * MV_PORT_REG_SZ
);
899 static void __iomem
*mv5_phy_base(void __iomem
*mmio
, unsigned int port
)
901 void __iomem
*hc_mmio
= mv_hc_base_from_port(mmio
, port
);
902 unsigned long ofs
= (mv_hardport_from_port(port
) + 1) * 0x100UL
;
904 return hc_mmio
+ ofs
;
907 static inline void __iomem
*mv_host_base(struct ata_host
*host
)
909 struct mv_host_priv
*hpriv
= host
->private_data
;
913 static inline void __iomem
*mv_ap_base(struct ata_port
*ap
)
915 return mv_port_base(mv_host_base(ap
->host
), ap
->port_no
);
918 static inline int mv_get_hc_count(unsigned long port_flags
)
920 return ((port_flags
& MV_FLAG_DUAL_HC
) ? 2 : 1);
924 * mv_save_cached_regs - (re-)initialize cached port registers
925 * @ap: the port whose registers we are caching
927 * Initialize the local cache of port registers,
928 * so that reading them over and over again can
929 * be avoided on the hotter paths of this driver.
930 * This saves a few microseconds each time we switch
931 * to/from EDMA mode to perform (eg.) a drive cache flush.
933 static void mv_save_cached_regs(struct ata_port
*ap
)
935 void __iomem
*port_mmio
= mv_ap_base(ap
);
936 struct mv_port_priv
*pp
= ap
->private_data
;
938 pp
->cached
.fiscfg
= readl(port_mmio
+ FISCFG
);
939 pp
->cached
.ltmode
= readl(port_mmio
+ LTMODE
);
940 pp
->cached
.haltcond
= readl(port_mmio
+ EDMA_HALTCOND
);
941 pp
->cached
.unknown_rsvd
= readl(port_mmio
+ EDMA_UNKNOWN_RSVD
);
945 * mv_write_cached_reg - write to a cached port register
946 * @addr: hardware address of the register
947 * @old: pointer to cached value of the register
948 * @new: new value for the register
950 * Write a new value to a cached register,
951 * but only if the value is different from before.
953 static inline void mv_write_cached_reg(void __iomem
*addr
, u32
*old
, u32
new)
959 * Workaround for 88SX60x1-B2 FEr SATA#13:
960 * Read-after-write is needed to prevent generating 64-bit
961 * write cycles on the PCI bus for SATA interface registers
962 * at offsets ending in 0x4 or 0xc.
964 * Looks like a lot of fuss, but it avoids an unnecessary
965 * +1 usec read-after-write delay for unaffected registers.
967 laddr
= (long)addr
& 0xffff;
968 if (laddr
>= 0x300 && laddr
<= 0x33c) {
970 if (laddr
== 0x4 || laddr
== 0xc) {
971 writelfl(new, addr
); /* read after write */
975 writel(new, addr
); /* unaffected by the errata */
979 static void mv_set_edma_ptrs(void __iomem
*port_mmio
,
980 struct mv_host_priv
*hpriv
,
981 struct mv_port_priv
*pp
)
986 * initialize request queue
988 pp
->req_idx
&= MV_MAX_Q_DEPTH_MASK
; /* paranoia */
989 index
= pp
->req_idx
<< EDMA_REQ_Q_PTR_SHIFT
;
991 WARN_ON(pp
->crqb_dma
& 0x3ff);
992 writel((pp
->crqb_dma
>> 16) >> 16, port_mmio
+ EDMA_REQ_Q_BASE_HI
);
993 writelfl((pp
->crqb_dma
& EDMA_REQ_Q_BASE_LO_MASK
) | index
,
994 port_mmio
+ EDMA_REQ_Q_IN_PTR
);
995 writelfl(index
, port_mmio
+ EDMA_REQ_Q_OUT_PTR
);
998 * initialize response queue
1000 pp
->resp_idx
&= MV_MAX_Q_DEPTH_MASK
; /* paranoia */
1001 index
= pp
->resp_idx
<< EDMA_RSP_Q_PTR_SHIFT
;
1003 WARN_ON(pp
->crpb_dma
& 0xff);
1004 writel((pp
->crpb_dma
>> 16) >> 16, port_mmio
+ EDMA_RSP_Q_BASE_HI
);
1005 writelfl(index
, port_mmio
+ EDMA_RSP_Q_IN_PTR
);
1006 writelfl((pp
->crpb_dma
& EDMA_RSP_Q_BASE_LO_MASK
) | index
,
1007 port_mmio
+ EDMA_RSP_Q_OUT_PTR
);
1010 static void mv_write_main_irq_mask(u32 mask
, struct mv_host_priv
*hpriv
)
1013 * When writing to the main_irq_mask in hardware,
1014 * we must ensure exclusivity between the interrupt coalescing bits
1015 * and the corresponding individual port DONE_IRQ bits.
1017 * Note that this register is really an "IRQ enable" register,
1018 * not an "IRQ mask" register as Marvell's naming might suggest.
1020 if (mask
& (ALL_PORTS_COAL_DONE
| PORTS_0_3_COAL_DONE
))
1021 mask
&= ~DONE_IRQ_0_3
;
1022 if (mask
& (ALL_PORTS_COAL_DONE
| PORTS_4_7_COAL_DONE
))
1023 mask
&= ~DONE_IRQ_4_7
;
1024 writelfl(mask
, hpriv
->main_irq_mask_addr
);
1027 static void mv_set_main_irq_mask(struct ata_host
*host
,
1028 u32 disable_bits
, u32 enable_bits
)
1030 struct mv_host_priv
*hpriv
= host
->private_data
;
1031 u32 old_mask
, new_mask
;
1033 old_mask
= hpriv
->main_irq_mask
;
1034 new_mask
= (old_mask
& ~disable_bits
) | enable_bits
;
1035 if (new_mask
!= old_mask
) {
1036 hpriv
->main_irq_mask
= new_mask
;
1037 mv_write_main_irq_mask(new_mask
, hpriv
);
1041 static void mv_enable_port_irqs(struct ata_port
*ap
,
1042 unsigned int port_bits
)
1044 unsigned int shift
, hardport
, port
= ap
->port_no
;
1045 u32 disable_bits
, enable_bits
;
1047 MV_PORT_TO_SHIFT_AND_HARDPORT(port
, shift
, hardport
);
1049 disable_bits
= (DONE_IRQ
| ERR_IRQ
) << shift
;
1050 enable_bits
= port_bits
<< shift
;
1051 mv_set_main_irq_mask(ap
->host
, disable_bits
, enable_bits
);
1054 static void mv_clear_and_enable_port_irqs(struct ata_port
*ap
,
1055 void __iomem
*port_mmio
,
1056 unsigned int port_irqs
)
1058 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
1059 int hardport
= mv_hardport_from_port(ap
->port_no
);
1060 void __iomem
*hc_mmio
= mv_hc_base_from_port(
1061 mv_host_base(ap
->host
), ap
->port_no
);
1064 /* clear EDMA event indicators, if any */
1065 writelfl(0, port_mmio
+ EDMA_ERR_IRQ_CAUSE
);
1067 /* clear pending irq events */
1068 hc_irq_cause
= ~((DEV_IRQ
| DMA_IRQ
) << hardport
);
1069 writelfl(hc_irq_cause
, hc_mmio
+ HC_IRQ_CAUSE
);
1071 /* clear FIS IRQ Cause */
1072 if (IS_GEN_IIE(hpriv
))
1073 writelfl(0, port_mmio
+ FIS_IRQ_CAUSE
);
1075 mv_enable_port_irqs(ap
, port_irqs
);
1078 static void mv_set_irq_coalescing(struct ata_host
*host
,
1079 unsigned int count
, unsigned int usecs
)
1081 struct mv_host_priv
*hpriv
= host
->private_data
;
1082 void __iomem
*mmio
= hpriv
->base
, *hc_mmio
;
1083 u32 coal_enable
= 0;
1084 unsigned long flags
;
1085 unsigned int clks
, is_dual_hc
= hpriv
->n_ports
> MV_PORTS_PER_HC
;
1086 const u32 coal_disable
= PORTS_0_3_COAL_DONE
| PORTS_4_7_COAL_DONE
|
1087 ALL_PORTS_COAL_DONE
;
1089 /* Disable IRQ coalescing if either threshold is zero */
1090 if (!usecs
|| !count
) {
1093 /* Respect maximum limits of the hardware */
1094 clks
= usecs
* COAL_CLOCKS_PER_USEC
;
1095 if (clks
> MAX_COAL_TIME_THRESHOLD
)
1096 clks
= MAX_COAL_TIME_THRESHOLD
;
1097 if (count
> MAX_COAL_IO_COUNT
)
1098 count
= MAX_COAL_IO_COUNT
;
1101 spin_lock_irqsave(&host
->lock
, flags
);
1102 mv_set_main_irq_mask(host
, coal_disable
, 0);
1104 if (is_dual_hc
&& !IS_GEN_I(hpriv
)) {
1106 * GEN_II/GEN_IIE with dual host controllers:
1107 * one set of global thresholds for the entire chip.
1109 writel(clks
, mmio
+ IRQ_COAL_TIME_THRESHOLD
);
1110 writel(count
, mmio
+ IRQ_COAL_IO_THRESHOLD
);
1111 /* clear leftover coal IRQ bit */
1112 writel(~ALL_PORTS_COAL_IRQ
, mmio
+ IRQ_COAL_CAUSE
);
1114 coal_enable
= ALL_PORTS_COAL_DONE
;
1115 clks
= count
= 0; /* force clearing of regular regs below */
1119 * All chips: independent thresholds for each HC on the chip.
1121 hc_mmio
= mv_hc_base_from_port(mmio
, 0);
1122 writel(clks
, hc_mmio
+ HC_IRQ_COAL_TIME_THRESHOLD
);
1123 writel(count
, hc_mmio
+ HC_IRQ_COAL_IO_THRESHOLD
);
1124 writel(~HC_COAL_IRQ
, hc_mmio
+ HC_IRQ_CAUSE
);
1126 coal_enable
|= PORTS_0_3_COAL_DONE
;
1128 hc_mmio
= mv_hc_base_from_port(mmio
, MV_PORTS_PER_HC
);
1129 writel(clks
, hc_mmio
+ HC_IRQ_COAL_TIME_THRESHOLD
);
1130 writel(count
, hc_mmio
+ HC_IRQ_COAL_IO_THRESHOLD
);
1131 writel(~HC_COAL_IRQ
, hc_mmio
+ HC_IRQ_CAUSE
);
1133 coal_enable
|= PORTS_4_7_COAL_DONE
;
1136 mv_set_main_irq_mask(host
, 0, coal_enable
);
1137 spin_unlock_irqrestore(&host
->lock
, flags
);
1141 * mv_start_edma - Enable eDMA engine
1142 * @base: port base address
1143 * @pp: port private data
1145 * Verify the local cache of the eDMA state is accurate with a
1149 * Inherited from caller.
1151 static void mv_start_edma(struct ata_port
*ap
, void __iomem
*port_mmio
,
1152 struct mv_port_priv
*pp
, u8 protocol
)
1154 int want_ncq
= (protocol
== ATA_PROT_NCQ
);
1156 if (pp
->pp_flags
& MV_PP_FLAG_EDMA_EN
) {
1157 int using_ncq
= ((pp
->pp_flags
& MV_PP_FLAG_NCQ_EN
) != 0);
1158 if (want_ncq
!= using_ncq
)
1161 if (!(pp
->pp_flags
& MV_PP_FLAG_EDMA_EN
)) {
1162 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
1164 mv_edma_cfg(ap
, want_ncq
, 1);
1166 mv_set_edma_ptrs(port_mmio
, hpriv
, pp
);
1167 mv_clear_and_enable_port_irqs(ap
, port_mmio
, DONE_IRQ
|ERR_IRQ
);
1169 writelfl(EDMA_EN
, port_mmio
+ EDMA_CMD
);
1170 pp
->pp_flags
|= MV_PP_FLAG_EDMA_EN
;
1174 static void mv_wait_for_edma_empty_idle(struct ata_port
*ap
)
1176 void __iomem
*port_mmio
= mv_ap_base(ap
);
1177 const u32 empty_idle
= (EDMA_STATUS_CACHE_EMPTY
| EDMA_STATUS_IDLE
);
1178 const int per_loop
= 5, timeout
= (15 * 1000 / per_loop
);
1182 * Wait for the EDMA engine to finish transactions in progress.
1183 * No idea what a good "timeout" value might be, but measurements
1184 * indicate that it often requires hundreds of microseconds
1185 * with two drives in-use. So we use the 15msec value above
1186 * as a rough guess at what even more drives might require.
1188 for (i
= 0; i
< timeout
; ++i
) {
1189 u32 edma_stat
= readl(port_mmio
+ EDMA_STATUS
);
1190 if ((edma_stat
& empty_idle
) == empty_idle
)
1194 /* ata_port_printk(ap, KERN_INFO, "%s: %u+ usecs\n", __func__, i); */
1198 * mv_stop_edma_engine - Disable eDMA engine
1199 * @port_mmio: io base address
1202 * Inherited from caller.
1204 static int mv_stop_edma_engine(void __iomem
*port_mmio
)
1208 /* Disable eDMA. The disable bit auto clears. */
1209 writelfl(EDMA_DS
, port_mmio
+ EDMA_CMD
);
1211 /* Wait for the chip to confirm eDMA is off. */
1212 for (i
= 10000; i
> 0; i
--) {
1213 u32 reg
= readl(port_mmio
+ EDMA_CMD
);
1214 if (!(reg
& EDMA_EN
))
1221 static int mv_stop_edma(struct ata_port
*ap
)
1223 void __iomem
*port_mmio
= mv_ap_base(ap
);
1224 struct mv_port_priv
*pp
= ap
->private_data
;
1227 if (!(pp
->pp_flags
& MV_PP_FLAG_EDMA_EN
))
1229 pp
->pp_flags
&= ~MV_PP_FLAG_EDMA_EN
;
1230 mv_wait_for_edma_empty_idle(ap
);
1231 if (mv_stop_edma_engine(port_mmio
)) {
1232 ata_port_printk(ap
, KERN_ERR
, "Unable to stop eDMA\n");
1235 mv_edma_cfg(ap
, 0, 0);
1240 static void mv_dump_mem(void __iomem
*start
, unsigned bytes
)
1243 for (b
= 0; b
< bytes
; ) {
1244 DPRINTK("%p: ", start
+ b
);
1245 for (w
= 0; b
< bytes
&& w
< 4; w
++) {
1246 printk("%08x ", readl(start
+ b
));
1254 static void mv_dump_pci_cfg(struct pci_dev
*pdev
, unsigned bytes
)
1259 for (b
= 0; b
< bytes
; ) {
1260 DPRINTK("%02x: ", b
);
1261 for (w
= 0; b
< bytes
&& w
< 4; w
++) {
1262 (void) pci_read_config_dword(pdev
, b
, &dw
);
1263 printk("%08x ", dw
);
1270 static void mv_dump_all_regs(void __iomem
*mmio_base
, int port
,
1271 struct pci_dev
*pdev
)
1274 void __iomem
*hc_base
= mv_hc_base(mmio_base
,
1275 port
>> MV_PORT_HC_SHIFT
);
1276 void __iomem
*port_base
;
1277 int start_port
, num_ports
, p
, start_hc
, num_hcs
, hc
;
1280 start_hc
= start_port
= 0;
1281 num_ports
= 8; /* shld be benign for 4 port devs */
1284 start_hc
= port
>> MV_PORT_HC_SHIFT
;
1286 num_ports
= num_hcs
= 1;
1288 DPRINTK("All registers for port(s) %u-%u:\n", start_port
,
1289 num_ports
> 1 ? num_ports
- 1 : start_port
);
1292 DPRINTK("PCI config space regs:\n");
1293 mv_dump_pci_cfg(pdev
, 0x68);
1295 DPRINTK("PCI regs:\n");
1296 mv_dump_mem(mmio_base
+0xc00, 0x3c);
1297 mv_dump_mem(mmio_base
+0xd00, 0x34);
1298 mv_dump_mem(mmio_base
+0xf00, 0x4);
1299 mv_dump_mem(mmio_base
+0x1d00, 0x6c);
1300 for (hc
= start_hc
; hc
< start_hc
+ num_hcs
; hc
++) {
1301 hc_base
= mv_hc_base(mmio_base
, hc
);
1302 DPRINTK("HC regs (HC %i):\n", hc
);
1303 mv_dump_mem(hc_base
, 0x1c);
1305 for (p
= start_port
; p
< start_port
+ num_ports
; p
++) {
1306 port_base
= mv_port_base(mmio_base
, p
);
1307 DPRINTK("EDMA regs (port %i):\n", p
);
1308 mv_dump_mem(port_base
, 0x54);
1309 DPRINTK("SATA regs (port %i):\n", p
);
1310 mv_dump_mem(port_base
+0x300, 0x60);
1315 static unsigned int mv_scr_offset(unsigned int sc_reg_in
)
1319 switch (sc_reg_in
) {
1323 ofs
= SATA_STATUS
+ (sc_reg_in
* sizeof(u32
));
1326 ofs
= SATA_ACTIVE
; /* active is not with the others */
1335 static int mv_scr_read(struct ata_link
*link
, unsigned int sc_reg_in
, u32
*val
)
1337 unsigned int ofs
= mv_scr_offset(sc_reg_in
);
1339 if (ofs
!= 0xffffffffU
) {
1340 *val
= readl(mv_ap_base(link
->ap
) + ofs
);
1346 static int mv_scr_write(struct ata_link
*link
, unsigned int sc_reg_in
, u32 val
)
1348 unsigned int ofs
= mv_scr_offset(sc_reg_in
);
1350 if (ofs
!= 0xffffffffU
) {
1351 void __iomem
*addr
= mv_ap_base(link
->ap
) + ofs
;
1352 if (sc_reg_in
== SCR_CONTROL
) {
1354 * Workaround for 88SX60x1 FEr SATA#26:
1356 * COMRESETs have to take care not to accidently
1357 * put the drive to sleep when writing SCR_CONTROL.
1358 * Setting bits 12..15 prevents this problem.
1360 * So if we see an outbound COMMRESET, set those bits.
1361 * Ditto for the followup write that clears the reset.
1363 * The proprietary driver does this for
1364 * all chip versions, and so do we.
1366 if ((val
& 0xf) == 1 || (readl(addr
) & 0xf) == 1)
1369 writelfl(val
, addr
);
1375 static void mv6_dev_config(struct ata_device
*adev
)
1378 * Deal with Gen-II ("mv6") hardware quirks/restrictions:
1380 * Gen-II does not support NCQ over a port multiplier
1381 * (no FIS-based switching).
1383 if (adev
->flags
& ATA_DFLAG_NCQ
) {
1384 if (sata_pmp_attached(adev
->link
->ap
)) {
1385 adev
->flags
&= ~ATA_DFLAG_NCQ
;
1386 ata_dev_printk(adev
, KERN_INFO
,
1387 "NCQ disabled for command-based switching\n");
1392 static int mv_qc_defer(struct ata_queued_cmd
*qc
)
1394 struct ata_link
*link
= qc
->dev
->link
;
1395 struct ata_port
*ap
= link
->ap
;
1396 struct mv_port_priv
*pp
= ap
->private_data
;
1399 * Don't allow new commands if we're in a delayed EH state
1400 * for NCQ and/or FIS-based switching.
1402 if (pp
->pp_flags
& MV_PP_FLAG_DELAYED_EH
)
1403 return ATA_DEFER_PORT
;
1405 /* PIO commands need exclusive link: no other commands [DMA or PIO]
1406 * can run concurrently.
1407 * set excl_link when we want to send a PIO command in DMA mode
1408 * or a non-NCQ command in NCQ mode.
1409 * When we receive a command from that link, and there are no
1410 * outstanding commands, mark a flag to clear excl_link and let
1411 * the command go through.
1413 if (unlikely(ap
->excl_link
)) {
1414 if (link
== ap
->excl_link
) {
1415 if (ap
->nr_active_links
)
1416 return ATA_DEFER_PORT
;
1417 qc
->flags
|= ATA_QCFLAG_CLEAR_EXCL
;
1420 return ATA_DEFER_PORT
;
1424 * If the port is completely idle, then allow the new qc.
1426 if (ap
->nr_active_links
== 0)
1430 * The port is operating in host queuing mode (EDMA) with NCQ
1431 * enabled, allow multiple NCQ commands. EDMA also allows
1432 * queueing multiple DMA commands but libata core currently
1435 if ((pp
->pp_flags
& MV_PP_FLAG_EDMA_EN
) &&
1436 (pp
->pp_flags
& MV_PP_FLAG_NCQ_EN
)) {
1437 if (ata_is_ncq(qc
->tf
.protocol
))
1440 ap
->excl_link
= link
;
1441 return ATA_DEFER_PORT
;
1445 return ATA_DEFER_PORT
;
1448 static void mv_config_fbs(struct ata_port
*ap
, int want_ncq
, int want_fbs
)
1450 struct mv_port_priv
*pp
= ap
->private_data
;
1451 void __iomem
*port_mmio
;
1453 u32 fiscfg
, *old_fiscfg
= &pp
->cached
.fiscfg
;
1454 u32 ltmode
, *old_ltmode
= &pp
->cached
.ltmode
;
1455 u32 haltcond
, *old_haltcond
= &pp
->cached
.haltcond
;
1457 ltmode
= *old_ltmode
& ~LTMODE_BIT8
;
1458 haltcond
= *old_haltcond
| EDMA_ERR_DEV
;
1461 fiscfg
= *old_fiscfg
| FISCFG_SINGLE_SYNC
;
1462 ltmode
= *old_ltmode
| LTMODE_BIT8
;
1464 haltcond
&= ~EDMA_ERR_DEV
;
1466 fiscfg
|= FISCFG_WAIT_DEV_ERR
;
1468 fiscfg
= *old_fiscfg
& ~(FISCFG_SINGLE_SYNC
| FISCFG_WAIT_DEV_ERR
);
1471 port_mmio
= mv_ap_base(ap
);
1472 mv_write_cached_reg(port_mmio
+ FISCFG
, old_fiscfg
, fiscfg
);
1473 mv_write_cached_reg(port_mmio
+ LTMODE
, old_ltmode
, ltmode
);
1474 mv_write_cached_reg(port_mmio
+ EDMA_HALTCOND
, old_haltcond
, haltcond
);
1477 static void mv_60x1_errata_sata25(struct ata_port
*ap
, int want_ncq
)
1479 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
1482 /* workaround for 88SX60x1 FEr SATA#25 (part 1) */
1483 old
= readl(hpriv
->base
+ GPIO_PORT_CTL
);
1485 new = old
| (1 << 22);
1487 new = old
& ~(1 << 22);
1489 writel(new, hpriv
->base
+ GPIO_PORT_CTL
);
1493 * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma
1494 * @ap: Port being initialized
1496 * There are two DMA modes on these chips: basic DMA, and EDMA.
1498 * Bit-0 of the "EDMA RESERVED" register enables/disables use
1499 * of basic DMA on the GEN_IIE versions of the chips.
1501 * This bit survives EDMA resets, and must be set for basic DMA
1502 * to function, and should be cleared when EDMA is active.
1504 static void mv_bmdma_enable_iie(struct ata_port
*ap
, int enable_bmdma
)
1506 struct mv_port_priv
*pp
= ap
->private_data
;
1507 u32
new, *old
= &pp
->cached
.unknown_rsvd
;
1513 mv_write_cached_reg(mv_ap_base(ap
) + EDMA_UNKNOWN_RSVD
, old
, new);
1517 * SOC chips have an issue whereby the HDD LEDs don't always blink
1518 * during I/O when NCQ is enabled. Enabling a special "LED blink" mode
1519 * of the SOC takes care of it, generating a steady blink rate when
1520 * any drive on the chip is active.
1522 * Unfortunately, the blink mode is a global hardware setting for the SOC,
1523 * so we must use it whenever at least one port on the SOC has NCQ enabled.
1525 * We turn "LED blink" off when NCQ is not in use anywhere, because the normal
1526 * LED operation works then, and provides better (more accurate) feedback.
1528 * Note that this code assumes that an SOC never has more than one HC onboard.
1530 static void mv_soc_led_blink_enable(struct ata_port
*ap
)
1532 struct ata_host
*host
= ap
->host
;
1533 struct mv_host_priv
*hpriv
= host
->private_data
;
1534 void __iomem
*hc_mmio
;
1537 if (hpriv
->hp_flags
& MV_HP_QUIRK_LED_BLINK_EN
)
1539 hpriv
->hp_flags
|= MV_HP_QUIRK_LED_BLINK_EN
;
1540 hc_mmio
= mv_hc_base_from_port(mv_host_base(host
), ap
->port_no
);
1541 led_ctrl
= readl(hc_mmio
+ SOC_LED_CTRL
);
1542 writel(led_ctrl
| SOC_LED_CTRL_BLINK
, hc_mmio
+ SOC_LED_CTRL
);
1545 static void mv_soc_led_blink_disable(struct ata_port
*ap
)
1547 struct ata_host
*host
= ap
->host
;
1548 struct mv_host_priv
*hpriv
= host
->private_data
;
1549 void __iomem
*hc_mmio
;
1553 if (!(hpriv
->hp_flags
& MV_HP_QUIRK_LED_BLINK_EN
))
1556 /* disable led-blink only if no ports are using NCQ */
1557 for (port
= 0; port
< hpriv
->n_ports
; port
++) {
1558 struct ata_port
*this_ap
= host
->ports
[port
];
1559 struct mv_port_priv
*pp
= this_ap
->private_data
;
1561 if (pp
->pp_flags
& MV_PP_FLAG_NCQ_EN
)
1565 hpriv
->hp_flags
&= ~MV_HP_QUIRK_LED_BLINK_EN
;
1566 hc_mmio
= mv_hc_base_from_port(mv_host_base(host
), ap
->port_no
);
1567 led_ctrl
= readl(hc_mmio
+ SOC_LED_CTRL
);
1568 writel(led_ctrl
& ~SOC_LED_CTRL_BLINK
, hc_mmio
+ SOC_LED_CTRL
);
1571 static void mv_edma_cfg(struct ata_port
*ap
, int want_ncq
, int want_edma
)
1574 struct mv_port_priv
*pp
= ap
->private_data
;
1575 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
1576 void __iomem
*port_mmio
= mv_ap_base(ap
);
1578 /* set up non-NCQ EDMA configuration */
1579 cfg
= EDMA_CFG_Q_DEPTH
; /* always 0x1f for *all* chips */
1581 ~(MV_PP_FLAG_FBS_EN
| MV_PP_FLAG_NCQ_EN
| MV_PP_FLAG_FAKE_ATA_BUSY
);
1583 if (IS_GEN_I(hpriv
))
1584 cfg
|= (1 << 8); /* enab config burst size mask */
1586 else if (IS_GEN_II(hpriv
)) {
1587 cfg
|= EDMA_CFG_RD_BRST_EXT
| EDMA_CFG_WR_BUFF_LEN
;
1588 mv_60x1_errata_sata25(ap
, want_ncq
);
1590 } else if (IS_GEN_IIE(hpriv
)) {
1591 int want_fbs
= sata_pmp_attached(ap
);
1593 * Possible future enhancement:
1595 * The chip can use FBS with non-NCQ, if we allow it,
1596 * But first we need to have the error handling in place
1597 * for this mode (datasheet section 7.3.15.4.2.3).
1598 * So disallow non-NCQ FBS for now.
1600 want_fbs
&= want_ncq
;
1602 mv_config_fbs(ap
, want_ncq
, want_fbs
);
1605 pp
->pp_flags
|= MV_PP_FLAG_FBS_EN
;
1606 cfg
|= EDMA_CFG_EDMA_FBS
; /* FIS-based switching */
1609 cfg
|= (1 << 23); /* do not mask PM field in rx'd FIS */
1611 cfg
|= (1 << 22); /* enab 4-entry host queue cache */
1613 cfg
|= (1 << 18); /* enab early completion */
1615 if (hpriv
->hp_flags
& MV_HP_CUT_THROUGH
)
1616 cfg
|= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
1617 mv_bmdma_enable_iie(ap
, !want_edma
);
1619 if (IS_SOC(hpriv
)) {
1621 mv_soc_led_blink_enable(ap
);
1623 mv_soc_led_blink_disable(ap
);
1628 cfg
|= EDMA_CFG_NCQ
;
1629 pp
->pp_flags
|= MV_PP_FLAG_NCQ_EN
;
1632 writelfl(cfg
, port_mmio
+ EDMA_CFG
);
1635 static void mv_port_free_dma_mem(struct ata_port
*ap
)
1637 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
1638 struct mv_port_priv
*pp
= ap
->private_data
;
1642 dma_pool_free(hpriv
->crqb_pool
, pp
->crqb
, pp
->crqb_dma
);
1646 dma_pool_free(hpriv
->crpb_pool
, pp
->crpb
, pp
->crpb_dma
);
1650 * For GEN_I, there's no NCQ, so we have only a single sg_tbl.
1651 * For later hardware, we have one unique sg_tbl per NCQ tag.
1653 for (tag
= 0; tag
< MV_MAX_Q_DEPTH
; ++tag
) {
1654 if (pp
->sg_tbl
[tag
]) {
1655 if (tag
== 0 || !IS_GEN_I(hpriv
))
1656 dma_pool_free(hpriv
->sg_tbl_pool
,
1658 pp
->sg_tbl_dma
[tag
]);
1659 pp
->sg_tbl
[tag
] = NULL
;
1665 * mv_port_start - Port specific init/start routine.
1666 * @ap: ATA channel to manipulate
1668 * Allocate and point to DMA memory, init port private memory,
1672 * Inherited from caller.
1674 static int mv_port_start(struct ata_port
*ap
)
1676 struct device
*dev
= ap
->host
->dev
;
1677 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
1678 struct mv_port_priv
*pp
;
1679 unsigned long flags
;
1682 pp
= devm_kzalloc(dev
, sizeof(*pp
), GFP_KERNEL
);
1685 ap
->private_data
= pp
;
1687 pp
->crqb
= dma_pool_alloc(hpriv
->crqb_pool
, GFP_KERNEL
, &pp
->crqb_dma
);
1690 memset(pp
->crqb
, 0, MV_CRQB_Q_SZ
);
1692 pp
->crpb
= dma_pool_alloc(hpriv
->crpb_pool
, GFP_KERNEL
, &pp
->crpb_dma
);
1694 goto out_port_free_dma_mem
;
1695 memset(pp
->crpb
, 0, MV_CRPB_Q_SZ
);
1697 /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
1698 if (hpriv
->hp_flags
& MV_HP_ERRATA_60X1C0
)
1699 ap
->flags
|= ATA_FLAG_AN
;
1701 * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
1702 * For later hardware, we need one unique sg_tbl per NCQ tag.
1704 for (tag
= 0; tag
< MV_MAX_Q_DEPTH
; ++tag
) {
1705 if (tag
== 0 || !IS_GEN_I(hpriv
)) {
1706 pp
->sg_tbl
[tag
] = dma_pool_alloc(hpriv
->sg_tbl_pool
,
1707 GFP_KERNEL
, &pp
->sg_tbl_dma
[tag
]);
1708 if (!pp
->sg_tbl
[tag
])
1709 goto out_port_free_dma_mem
;
1711 pp
->sg_tbl
[tag
] = pp
->sg_tbl
[0];
1712 pp
->sg_tbl_dma
[tag
] = pp
->sg_tbl_dma
[0];
1716 spin_lock_irqsave(ap
->lock
, flags
);
1717 mv_save_cached_regs(ap
);
1718 mv_edma_cfg(ap
, 0, 0);
1719 spin_unlock_irqrestore(ap
->lock
, flags
);
1723 out_port_free_dma_mem
:
1724 mv_port_free_dma_mem(ap
);
1729 * mv_port_stop - Port specific cleanup/stop routine.
1730 * @ap: ATA channel to manipulate
1732 * Stop DMA, cleanup port memory.
1735 * This routine uses the host lock to protect the DMA stop.
1737 static void mv_port_stop(struct ata_port
*ap
)
1739 unsigned long flags
;
1741 spin_lock_irqsave(ap
->lock
, flags
);
1743 mv_enable_port_irqs(ap
, 0);
1744 spin_unlock_irqrestore(ap
->lock
, flags
);
1745 mv_port_free_dma_mem(ap
);
1749 * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
1750 * @qc: queued command whose SG list to source from
1752 * Populate the SG list and mark the last entry.
1755 * Inherited from caller.
1757 static void mv_fill_sg(struct ata_queued_cmd
*qc
)
1759 struct mv_port_priv
*pp
= qc
->ap
->private_data
;
1760 struct scatterlist
*sg
;
1761 struct mv_sg
*mv_sg
, *last_sg
= NULL
;
1764 mv_sg
= pp
->sg_tbl
[qc
->tag
];
1765 for_each_sg(qc
->sg
, sg
, qc
->n_elem
, si
) {
1766 dma_addr_t addr
= sg_dma_address(sg
);
1767 u32 sg_len
= sg_dma_len(sg
);
1770 u32 offset
= addr
& 0xffff;
1773 if (offset
+ len
> 0x10000)
1774 len
= 0x10000 - offset
;
1776 mv_sg
->addr
= cpu_to_le32(addr
& 0xffffffff);
1777 mv_sg
->addr_hi
= cpu_to_le32((addr
>> 16) >> 16);
1778 mv_sg
->flags_size
= cpu_to_le32(len
& 0xffff);
1779 mv_sg
->reserved
= 0;
1789 if (likely(last_sg
))
1790 last_sg
->flags_size
|= cpu_to_le32(EPRD_FLAG_END_OF_TBL
);
1791 mb(); /* ensure data structure is visible to the chipset */
1794 static void mv_crqb_pack_cmd(__le16
*cmdw
, u8 data
, u8 addr
, unsigned last
)
1796 u16 tmp
= data
| (addr
<< CRQB_CMD_ADDR_SHIFT
) | CRQB_CMD_CS
|
1797 (last
? CRQB_CMD_LAST
: 0);
1798 *cmdw
= cpu_to_le16(tmp
);
1802 * mv_sff_irq_clear - Clear hardware interrupt after DMA.
1803 * @ap: Port associated with this ATA transaction.
1805 * We need this only for ATAPI bmdma transactions,
1806 * as otherwise we experience spurious interrupts
1807 * after libata-sff handles the bmdma interrupts.
1809 static void mv_sff_irq_clear(struct ata_port
*ap
)
1811 mv_clear_and_enable_port_irqs(ap
, mv_ap_base(ap
), ERR_IRQ
);
1815 * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA.
1816 * @qc: queued command to check for chipset/DMA compatibility.
1818 * The bmdma engines cannot handle speculative data sizes
1819 * (bytecount under/over flow). So only allow DMA for
1820 * data transfer commands with known data sizes.
1823 * Inherited from caller.
1825 static int mv_check_atapi_dma(struct ata_queued_cmd
*qc
)
1827 struct scsi_cmnd
*scmd
= qc
->scsicmd
;
1830 switch (scmd
->cmnd
[0]) {
1838 case GPCMD_SEND_DVD_STRUCTURE
:
1839 case GPCMD_SEND_CUE_SHEET
:
1840 return 0; /* DMA is safe */
1843 return -EOPNOTSUPP
; /* use PIO instead */
1847 * mv_bmdma_setup - Set up BMDMA transaction
1848 * @qc: queued command to prepare DMA for.
1851 * Inherited from caller.
1853 static void mv_bmdma_setup(struct ata_queued_cmd
*qc
)
1855 struct ata_port
*ap
= qc
->ap
;
1856 void __iomem
*port_mmio
= mv_ap_base(ap
);
1857 struct mv_port_priv
*pp
= ap
->private_data
;
1861 /* clear all DMA cmd bits */
1862 writel(0, port_mmio
+ BMDMA_CMD
);
1864 /* load PRD table addr. */
1865 writel((pp
->sg_tbl_dma
[qc
->tag
] >> 16) >> 16,
1866 port_mmio
+ BMDMA_PRD_HIGH
);
1867 writelfl(pp
->sg_tbl_dma
[qc
->tag
],
1868 port_mmio
+ BMDMA_PRD_LOW
);
1870 /* issue r/w command */
1871 ap
->ops
->sff_exec_command(ap
, &qc
->tf
);
1875 * mv_bmdma_start - Start a BMDMA transaction
1876 * @qc: queued command to start DMA on.
1879 * Inherited from caller.
1881 static void mv_bmdma_start(struct ata_queued_cmd
*qc
)
1883 struct ata_port
*ap
= qc
->ap
;
1884 void __iomem
*port_mmio
= mv_ap_base(ap
);
1885 unsigned int rw
= (qc
->tf
.flags
& ATA_TFLAG_WRITE
);
1886 u32 cmd
= (rw
? 0 : ATA_DMA_WR
) | ATA_DMA_START
;
1888 /* start host DMA transaction */
1889 writelfl(cmd
, port_mmio
+ BMDMA_CMD
);
1893 * mv_bmdma_stop - Stop BMDMA transfer
1894 * @qc: queued command to stop DMA on.
1896 * Clears the ATA_DMA_START flag in the bmdma control register
1899 * Inherited from caller.
1901 static void mv_bmdma_stop_ap(struct ata_port
*ap
)
1903 void __iomem
*port_mmio
= mv_ap_base(ap
);
1906 /* clear start/stop bit */
1907 cmd
= readl(port_mmio
+ BMDMA_CMD
);
1908 if (cmd
& ATA_DMA_START
) {
1909 cmd
&= ~ATA_DMA_START
;
1910 writelfl(cmd
, port_mmio
+ BMDMA_CMD
);
1912 /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
1913 ata_sff_dma_pause(ap
);
1917 static void mv_bmdma_stop(struct ata_queued_cmd
*qc
)
1919 mv_bmdma_stop_ap(qc
->ap
);
1923 * mv_bmdma_status - Read BMDMA status
1924 * @ap: port for which to retrieve DMA status.
1926 * Read and return equivalent of the sff BMDMA status register.
1929 * Inherited from caller.
1931 static u8
mv_bmdma_status(struct ata_port
*ap
)
1933 void __iomem
*port_mmio
= mv_ap_base(ap
);
1937 * Other bits are valid only if ATA_DMA_ACTIVE==0,
1938 * and the ATA_DMA_INTR bit doesn't exist.
1940 reg
= readl(port_mmio
+ BMDMA_STATUS
);
1941 if (reg
& ATA_DMA_ACTIVE
)
1942 status
= ATA_DMA_ACTIVE
;
1943 else if (reg
& ATA_DMA_ERR
)
1944 status
= (reg
& ATA_DMA_ERR
) | ATA_DMA_INTR
;
1947 * Just because DMA_ACTIVE is 0 (DMA completed),
1948 * this does _not_ mean the device is "done".
1949 * So we should not yet be signalling ATA_DMA_INTR
1950 * in some cases. Eg. DSM/TRIM, and perhaps others.
1952 mv_bmdma_stop_ap(ap
);
1953 if (ioread8(ap
->ioaddr
.altstatus_addr
) & ATA_BUSY
)
1956 status
= ATA_DMA_INTR
;
1961 static void mv_rw_multi_errata_sata24(struct ata_queued_cmd
*qc
)
1963 struct ata_taskfile
*tf
= &qc
->tf
;
1965 * Workaround for 88SX60x1 FEr SATA#24.
1967 * Chip may corrupt WRITEs if multi_count >= 4kB.
1968 * Note that READs are unaffected.
1970 * It's not clear if this errata really means "4K bytes",
1971 * or if it always happens for multi_count > 7
1972 * regardless of device sector_size.
1974 * So, for safety, any write with multi_count > 7
1975 * gets converted here into a regular PIO write instead:
1977 if ((tf
->flags
& ATA_TFLAG_WRITE
) && is_multi_taskfile(tf
)) {
1978 if (qc
->dev
->multi_count
> 7) {
1979 switch (tf
->command
) {
1980 case ATA_CMD_WRITE_MULTI
:
1981 tf
->command
= ATA_CMD_PIO_WRITE
;
1983 case ATA_CMD_WRITE_MULTI_FUA_EXT
:
1984 tf
->flags
&= ~ATA_TFLAG_FUA
; /* ugh */
1986 case ATA_CMD_WRITE_MULTI_EXT
:
1987 tf
->command
= ATA_CMD_PIO_WRITE_EXT
;
1995 * mv_qc_prep - Host specific command preparation.
1996 * @qc: queued command to prepare
1998 * This routine simply redirects to the general purpose routine
1999 * if command is not DMA. Else, it handles prep of the CRQB
2000 * (command request block), does some sanity checking, and calls
2001 * the SG load routine.
2004 * Inherited from caller.
2006 static void mv_qc_prep(struct ata_queued_cmd
*qc
)
2008 struct ata_port
*ap
= qc
->ap
;
2009 struct mv_port_priv
*pp
= ap
->private_data
;
2011 struct ata_taskfile
*tf
= &qc
->tf
;
2015 switch (tf
->protocol
) {
2017 if (tf
->command
== ATA_CMD_DSM
)
2021 break; /* continue below */
2023 mv_rw_multi_errata_sata24(qc
);
2029 /* Fill in command request block
2031 if (!(tf
->flags
& ATA_TFLAG_WRITE
))
2032 flags
|= CRQB_FLAG_READ
;
2033 WARN_ON(MV_MAX_Q_DEPTH
<= qc
->tag
);
2034 flags
|= qc
->tag
<< CRQB_TAG_SHIFT
;
2035 flags
|= (qc
->dev
->link
->pmp
& 0xf) << CRQB_PMP_SHIFT
;
2037 /* get current queue index from software */
2038 in_index
= pp
->req_idx
;
2040 pp
->crqb
[in_index
].sg_addr
=
2041 cpu_to_le32(pp
->sg_tbl_dma
[qc
->tag
] & 0xffffffff);
2042 pp
->crqb
[in_index
].sg_addr_hi
=
2043 cpu_to_le32((pp
->sg_tbl_dma
[qc
->tag
] >> 16) >> 16);
2044 pp
->crqb
[in_index
].ctrl_flags
= cpu_to_le16(flags
);
2046 cw
= &pp
->crqb
[in_index
].ata_cmd
[0];
2048 /* Sadly, the CRQB cannot accomodate all registers--there are
2049 * only 11 bytes...so we must pick and choose required
2050 * registers based on the command. So, we drop feature and
2051 * hob_feature for [RW] DMA commands, but they are needed for
2052 * NCQ. NCQ will drop hob_nsect, which is not needed there
2053 * (nsect is used only for the tag; feat/hob_feat hold true nsect).
2055 switch (tf
->command
) {
2057 case ATA_CMD_READ_EXT
:
2059 case ATA_CMD_WRITE_EXT
:
2060 case ATA_CMD_WRITE_FUA_EXT
:
2061 mv_crqb_pack_cmd(cw
++, tf
->hob_nsect
, ATA_REG_NSECT
, 0);
2063 case ATA_CMD_FPDMA_READ
:
2064 case ATA_CMD_FPDMA_WRITE
:
2065 mv_crqb_pack_cmd(cw
++, tf
->hob_feature
, ATA_REG_FEATURE
, 0);
2066 mv_crqb_pack_cmd(cw
++, tf
->feature
, ATA_REG_FEATURE
, 0);
2069 /* The only other commands EDMA supports in non-queued and
2070 * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
2071 * of which are defined/used by Linux. If we get here, this
2072 * driver needs work.
2074 * FIXME: modify libata to give qc_prep a return value and
2075 * return error here.
2077 BUG_ON(tf
->command
);
2080 mv_crqb_pack_cmd(cw
++, tf
->nsect
, ATA_REG_NSECT
, 0);
2081 mv_crqb_pack_cmd(cw
++, tf
->hob_lbal
, ATA_REG_LBAL
, 0);
2082 mv_crqb_pack_cmd(cw
++, tf
->lbal
, ATA_REG_LBAL
, 0);
2083 mv_crqb_pack_cmd(cw
++, tf
->hob_lbam
, ATA_REG_LBAM
, 0);
2084 mv_crqb_pack_cmd(cw
++, tf
->lbam
, ATA_REG_LBAM
, 0);
2085 mv_crqb_pack_cmd(cw
++, tf
->hob_lbah
, ATA_REG_LBAH
, 0);
2086 mv_crqb_pack_cmd(cw
++, tf
->lbah
, ATA_REG_LBAH
, 0);
2087 mv_crqb_pack_cmd(cw
++, tf
->device
, ATA_REG_DEVICE
, 0);
2088 mv_crqb_pack_cmd(cw
++, tf
->command
, ATA_REG_CMD
, 1); /* last */
2090 if (!(qc
->flags
& ATA_QCFLAG_DMAMAP
))
2096 * mv_qc_prep_iie - Host specific command preparation.
2097 * @qc: queued command to prepare
2099 * This routine simply redirects to the general purpose routine
2100 * if command is not DMA. Else, it handles prep of the CRQB
2101 * (command request block), does some sanity checking, and calls
2102 * the SG load routine.
2105 * Inherited from caller.
2107 static void mv_qc_prep_iie(struct ata_queued_cmd
*qc
)
2109 struct ata_port
*ap
= qc
->ap
;
2110 struct mv_port_priv
*pp
= ap
->private_data
;
2111 struct mv_crqb_iie
*crqb
;
2112 struct ata_taskfile
*tf
= &qc
->tf
;
2116 if ((tf
->protocol
!= ATA_PROT_DMA
) &&
2117 (tf
->protocol
!= ATA_PROT_NCQ
))
2119 if (tf
->command
== ATA_CMD_DSM
)
2120 return; /* use bmdma for this */
2122 /* Fill in Gen IIE command request block */
2123 if (!(tf
->flags
& ATA_TFLAG_WRITE
))
2124 flags
|= CRQB_FLAG_READ
;
2126 WARN_ON(MV_MAX_Q_DEPTH
<= qc
->tag
);
2127 flags
|= qc
->tag
<< CRQB_TAG_SHIFT
;
2128 flags
|= qc
->tag
<< CRQB_HOSTQ_SHIFT
;
2129 flags
|= (qc
->dev
->link
->pmp
& 0xf) << CRQB_PMP_SHIFT
;
2131 /* get current queue index from software */
2132 in_index
= pp
->req_idx
;
2134 crqb
= (struct mv_crqb_iie
*) &pp
->crqb
[in_index
];
2135 crqb
->addr
= cpu_to_le32(pp
->sg_tbl_dma
[qc
->tag
] & 0xffffffff);
2136 crqb
->addr_hi
= cpu_to_le32((pp
->sg_tbl_dma
[qc
->tag
] >> 16) >> 16);
2137 crqb
->flags
= cpu_to_le32(flags
);
2139 crqb
->ata_cmd
[0] = cpu_to_le32(
2140 (tf
->command
<< 16) |
2143 crqb
->ata_cmd
[1] = cpu_to_le32(
2149 crqb
->ata_cmd
[2] = cpu_to_le32(
2150 (tf
->hob_lbal
<< 0) |
2151 (tf
->hob_lbam
<< 8) |
2152 (tf
->hob_lbah
<< 16) |
2153 (tf
->hob_feature
<< 24)
2155 crqb
->ata_cmd
[3] = cpu_to_le32(
2157 (tf
->hob_nsect
<< 8)
2160 if (!(qc
->flags
& ATA_QCFLAG_DMAMAP
))
2166 * mv_sff_check_status - fetch device status, if valid
2167 * @ap: ATA port to fetch status from
2169 * When using command issue via mv_qc_issue_fis(),
2170 * the initial ATA_BUSY state does not show up in the
2171 * ATA status (shadow) register. This can confuse libata!
2173 * So we have a hook here to fake ATA_BUSY for that situation,
2174 * until the first time a BUSY, DRQ, or ERR bit is seen.
2176 * The rest of the time, it simply returns the ATA status register.
2178 static u8
mv_sff_check_status(struct ata_port
*ap
)
2180 u8 stat
= ioread8(ap
->ioaddr
.status_addr
);
2181 struct mv_port_priv
*pp
= ap
->private_data
;
2183 if (pp
->pp_flags
& MV_PP_FLAG_FAKE_ATA_BUSY
) {
2184 if (stat
& (ATA_BUSY
| ATA_DRQ
| ATA_ERR
))
2185 pp
->pp_flags
&= ~MV_PP_FLAG_FAKE_ATA_BUSY
;
2193 * mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register
2194 * @fis: fis to be sent
2195 * @nwords: number of 32-bit words in the fis
2197 static unsigned int mv_send_fis(struct ata_port
*ap
, u32
*fis
, int nwords
)
2199 void __iomem
*port_mmio
= mv_ap_base(ap
);
2200 u32 ifctl
, old_ifctl
, ifstat
;
2201 int i
, timeout
= 200, final_word
= nwords
- 1;
2203 /* Initiate FIS transmission mode */
2204 old_ifctl
= readl(port_mmio
+ SATA_IFCTL
);
2205 ifctl
= 0x100 | (old_ifctl
& 0xf);
2206 writelfl(ifctl
, port_mmio
+ SATA_IFCTL
);
2208 /* Send all words of the FIS except for the final word */
2209 for (i
= 0; i
< final_word
; ++i
)
2210 writel(fis
[i
], port_mmio
+ VENDOR_UNIQUE_FIS
);
2212 /* Flag end-of-transmission, and then send the final word */
2213 writelfl(ifctl
| 0x200, port_mmio
+ SATA_IFCTL
);
2214 writelfl(fis
[final_word
], port_mmio
+ VENDOR_UNIQUE_FIS
);
2217 * Wait for FIS transmission to complete.
2218 * This typically takes just a single iteration.
2221 ifstat
= readl(port_mmio
+ SATA_IFSTAT
);
2222 } while (!(ifstat
& 0x1000) && --timeout
);
2224 /* Restore original port configuration */
2225 writelfl(old_ifctl
, port_mmio
+ SATA_IFCTL
);
2227 /* See if it worked */
2228 if ((ifstat
& 0x3000) != 0x1000) {
2229 ata_port_printk(ap
, KERN_WARNING
,
2230 "%s transmission error, ifstat=%08x\n",
2232 return AC_ERR_OTHER
;
2238 * mv_qc_issue_fis - Issue a command directly as a FIS
2239 * @qc: queued command to start
2241 * Note that the ATA shadow registers are not updated
2242 * after command issue, so the device will appear "READY"
2243 * if polled, even while it is BUSY processing the command.
2245 * So we use a status hook to fake ATA_BUSY until the drive changes state.
2247 * Note: we don't get updated shadow regs on *completion*
2248 * of non-data commands. So avoid sending them via this function,
2249 * as they will appear to have completed immediately.
2251 * GEN_IIE has special registers that we could get the result tf from,
2252 * but earlier chipsets do not. For now, we ignore those registers.
2254 static unsigned int mv_qc_issue_fis(struct ata_queued_cmd
*qc
)
2256 struct ata_port
*ap
= qc
->ap
;
2257 struct mv_port_priv
*pp
= ap
->private_data
;
2258 struct ata_link
*link
= qc
->dev
->link
;
2262 ata_tf_to_fis(&qc
->tf
, link
->pmp
, 1, (void *)fis
);
2263 err
= mv_send_fis(ap
, fis
, ARRAY_SIZE(fis
));
2267 switch (qc
->tf
.protocol
) {
2268 case ATAPI_PROT_PIO
:
2269 pp
->pp_flags
|= MV_PP_FLAG_FAKE_ATA_BUSY
;
2271 case ATAPI_PROT_NODATA
:
2272 ap
->hsm_task_state
= HSM_ST_FIRST
;
2275 pp
->pp_flags
|= MV_PP_FLAG_FAKE_ATA_BUSY
;
2276 if (qc
->tf
.flags
& ATA_TFLAG_WRITE
)
2277 ap
->hsm_task_state
= HSM_ST_FIRST
;
2279 ap
->hsm_task_state
= HSM_ST
;
2282 ap
->hsm_task_state
= HSM_ST_LAST
;
2286 if (qc
->tf
.flags
& ATA_TFLAG_POLLING
)
2287 ata_sff_queue_pio_task(link
, 0);
2292 * mv_qc_issue - Initiate a command to the host
2293 * @qc: queued command to start
2295 * This routine simply redirects to the general purpose routine
2296 * if command is not DMA. Else, it sanity checks our local
2297 * caches of the request producer/consumer indices then enables
2298 * DMA and bumps the request producer index.
2301 * Inherited from caller.
2303 static unsigned int mv_qc_issue(struct ata_queued_cmd
*qc
)
2305 static int limit_warnings
= 10;
2306 struct ata_port
*ap
= qc
->ap
;
2307 void __iomem
*port_mmio
= mv_ap_base(ap
);
2308 struct mv_port_priv
*pp
= ap
->private_data
;
2310 unsigned int port_irqs
;
2312 pp
->pp_flags
&= ~MV_PP_FLAG_FAKE_ATA_BUSY
; /* paranoia */
2314 switch (qc
->tf
.protocol
) {
2316 if (qc
->tf
.command
== ATA_CMD_DSM
) {
2317 if (!ap
->ops
->bmdma_setup
) /* no bmdma on GEN_I */
2318 return AC_ERR_OTHER
;
2319 break; /* use bmdma for this */
2323 mv_start_edma(ap
, port_mmio
, pp
, qc
->tf
.protocol
);
2324 pp
->req_idx
= (pp
->req_idx
+ 1) & MV_MAX_Q_DEPTH_MASK
;
2325 in_index
= pp
->req_idx
<< EDMA_REQ_Q_PTR_SHIFT
;
2327 /* Write the request in pointer to kick the EDMA to life */
2328 writelfl((pp
->crqb_dma
& EDMA_REQ_Q_BASE_LO_MASK
) | in_index
,
2329 port_mmio
+ EDMA_REQ_Q_IN_PTR
);
2334 * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
2336 * Someday, we might implement special polling workarounds
2337 * for these, but it all seems rather unnecessary since we
2338 * normally use only DMA for commands which transfer more
2339 * than a single block of data.
2341 * Much of the time, this could just work regardless.
2342 * So for now, just log the incident, and allow the attempt.
2344 if (limit_warnings
> 0 && (qc
->nbytes
/ qc
->sect_size
) > 1) {
2346 ata_link_printk(qc
->dev
->link
, KERN_WARNING
, DRV_NAME
2347 ": attempting PIO w/multiple DRQ: "
2348 "this may fail due to h/w errata\n");
2351 case ATA_PROT_NODATA
:
2352 case ATAPI_PROT_PIO
:
2353 case ATAPI_PROT_NODATA
:
2354 if (ap
->flags
& ATA_FLAG_PIO_POLLING
)
2355 qc
->tf
.flags
|= ATA_TFLAG_POLLING
;
2359 if (qc
->tf
.flags
& ATA_TFLAG_POLLING
)
2360 port_irqs
= ERR_IRQ
; /* mask device interrupt when polling */
2362 port_irqs
= ERR_IRQ
| DONE_IRQ
; /* unmask all interrupts */
2365 * We're about to send a non-EDMA capable command to the
2366 * port. Turn off EDMA so there won't be problems accessing
2367 * shadow block, etc registers.
2370 mv_clear_and_enable_port_irqs(ap
, mv_ap_base(ap
), port_irqs
);
2371 mv_pmp_select(ap
, qc
->dev
->link
->pmp
);
2373 if (qc
->tf
.command
== ATA_CMD_READ_LOG_EXT
) {
2374 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
2376 * Workaround for 88SX60x1 FEr SATA#25 (part 2).
2378 * After any NCQ error, the READ_LOG_EXT command
2379 * from libata-eh *must* use mv_qc_issue_fis().
2380 * Otherwise it might fail, due to chip errata.
2382 * Rather than special-case it, we'll just *always*
2383 * use this method here for READ_LOG_EXT, making for
2386 if (IS_GEN_II(hpriv
))
2387 return mv_qc_issue_fis(qc
);
2389 return ata_bmdma_qc_issue(qc
);
2392 static struct ata_queued_cmd
*mv_get_active_qc(struct ata_port
*ap
)
2394 struct mv_port_priv
*pp
= ap
->private_data
;
2395 struct ata_queued_cmd
*qc
;
2397 if (pp
->pp_flags
& MV_PP_FLAG_NCQ_EN
)
2399 qc
= ata_qc_from_tag(ap
, ap
->link
.active_tag
);
2400 if (qc
&& !(qc
->tf
.flags
& ATA_TFLAG_POLLING
))
2405 static void mv_pmp_error_handler(struct ata_port
*ap
)
2407 unsigned int pmp
, pmp_map
;
2408 struct mv_port_priv
*pp
= ap
->private_data
;
2410 if (pp
->pp_flags
& MV_PP_FLAG_DELAYED_EH
) {
2412 * Perform NCQ error analysis on failed PMPs
2413 * before we freeze the port entirely.
2415 * The failed PMPs are marked earlier by mv_pmp_eh_prep().
2417 pmp_map
= pp
->delayed_eh_pmp_map
;
2418 pp
->pp_flags
&= ~MV_PP_FLAG_DELAYED_EH
;
2419 for (pmp
= 0; pmp_map
!= 0; pmp
++) {
2420 unsigned int this_pmp
= (1 << pmp
);
2421 if (pmp_map
& this_pmp
) {
2422 struct ata_link
*link
= &ap
->pmp_link
[pmp
];
2423 pmp_map
&= ~this_pmp
;
2424 ata_eh_analyze_ncq_error(link
);
2427 ata_port_freeze(ap
);
2429 sata_pmp_error_handler(ap
);
2432 static unsigned int mv_get_err_pmp_map(struct ata_port
*ap
)
2434 void __iomem
*port_mmio
= mv_ap_base(ap
);
2436 return readl(port_mmio
+ SATA_TESTCTL
) >> 16;
2439 static void mv_pmp_eh_prep(struct ata_port
*ap
, unsigned int pmp_map
)
2441 struct ata_eh_info
*ehi
;
2445 * Initialize EH info for PMPs which saw device errors
2447 ehi
= &ap
->link
.eh_info
;
2448 for (pmp
= 0; pmp_map
!= 0; pmp
++) {
2449 unsigned int this_pmp
= (1 << pmp
);
2450 if (pmp_map
& this_pmp
) {
2451 struct ata_link
*link
= &ap
->pmp_link
[pmp
];
2453 pmp_map
&= ~this_pmp
;
2454 ehi
= &link
->eh_info
;
2455 ata_ehi_clear_desc(ehi
);
2456 ata_ehi_push_desc(ehi
, "dev err");
2457 ehi
->err_mask
|= AC_ERR_DEV
;
2458 ehi
->action
|= ATA_EH_RESET
;
2459 ata_link_abort(link
);
2464 static int mv_req_q_empty(struct ata_port
*ap
)
2466 void __iomem
*port_mmio
= mv_ap_base(ap
);
2467 u32 in_ptr
, out_ptr
;
2469 in_ptr
= (readl(port_mmio
+ EDMA_REQ_Q_IN_PTR
)
2470 >> EDMA_REQ_Q_PTR_SHIFT
) & MV_MAX_Q_DEPTH_MASK
;
2471 out_ptr
= (readl(port_mmio
+ EDMA_REQ_Q_OUT_PTR
)
2472 >> EDMA_REQ_Q_PTR_SHIFT
) & MV_MAX_Q_DEPTH_MASK
;
2473 return (in_ptr
== out_ptr
); /* 1 == queue_is_empty */
2476 static int mv_handle_fbs_ncq_dev_err(struct ata_port
*ap
)
2478 struct mv_port_priv
*pp
= ap
->private_data
;
2480 unsigned int old_map
, new_map
;
2483 * Device error during FBS+NCQ operation:
2485 * Set a port flag to prevent further I/O being enqueued.
2486 * Leave the EDMA running to drain outstanding commands from this port.
2487 * Perform the post-mortem/EH only when all responses are complete.
2488 * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.2).
2490 if (!(pp
->pp_flags
& MV_PP_FLAG_DELAYED_EH
)) {
2491 pp
->pp_flags
|= MV_PP_FLAG_DELAYED_EH
;
2492 pp
->delayed_eh_pmp_map
= 0;
2494 old_map
= pp
->delayed_eh_pmp_map
;
2495 new_map
= old_map
| mv_get_err_pmp_map(ap
);
2497 if (old_map
!= new_map
) {
2498 pp
->delayed_eh_pmp_map
= new_map
;
2499 mv_pmp_eh_prep(ap
, new_map
& ~old_map
);
2501 failed_links
= hweight16(new_map
);
2503 ata_port_printk(ap
, KERN_INFO
, "%s: pmp_map=%04x qc_map=%04x "
2504 "failed_links=%d nr_active_links=%d\n",
2505 __func__
, pp
->delayed_eh_pmp_map
,
2506 ap
->qc_active
, failed_links
,
2507 ap
->nr_active_links
);
2509 if (ap
->nr_active_links
<= failed_links
&& mv_req_q_empty(ap
)) {
2510 mv_process_crpb_entries(ap
, pp
);
2513 ata_port_printk(ap
, KERN_INFO
, "%s: done\n", __func__
);
2514 return 1; /* handled */
2516 ata_port_printk(ap
, KERN_INFO
, "%s: waiting\n", __func__
);
2517 return 1; /* handled */
2520 static int mv_handle_fbs_non_ncq_dev_err(struct ata_port
*ap
)
2523 * Possible future enhancement:
2525 * FBS+non-NCQ operation is not yet implemented.
2526 * See related notes in mv_edma_cfg().
2528 * Device error during FBS+non-NCQ operation:
2530 * We need to snapshot the shadow registers for each failed command.
2531 * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.3).
2533 return 0; /* not handled */
2536 static int mv_handle_dev_err(struct ata_port
*ap
, u32 edma_err_cause
)
2538 struct mv_port_priv
*pp
= ap
->private_data
;
2540 if (!(pp
->pp_flags
& MV_PP_FLAG_EDMA_EN
))
2541 return 0; /* EDMA was not active: not handled */
2542 if (!(pp
->pp_flags
& MV_PP_FLAG_FBS_EN
))
2543 return 0; /* FBS was not active: not handled */
2545 if (!(edma_err_cause
& EDMA_ERR_DEV
))
2546 return 0; /* non DEV error: not handled */
2547 edma_err_cause
&= ~EDMA_ERR_IRQ_TRANSIENT
;
2548 if (edma_err_cause
& ~(EDMA_ERR_DEV
| EDMA_ERR_SELF_DIS
))
2549 return 0; /* other problems: not handled */
2551 if (pp
->pp_flags
& MV_PP_FLAG_NCQ_EN
) {
2553 * EDMA should NOT have self-disabled for this case.
2554 * If it did, then something is wrong elsewhere,
2555 * and we cannot handle it here.
2557 if (edma_err_cause
& EDMA_ERR_SELF_DIS
) {
2558 ata_port_printk(ap
, KERN_WARNING
,
2559 "%s: err_cause=0x%x pp_flags=0x%x\n",
2560 __func__
, edma_err_cause
, pp
->pp_flags
);
2561 return 0; /* not handled */
2563 return mv_handle_fbs_ncq_dev_err(ap
);
2566 * EDMA should have self-disabled for this case.
2567 * If it did not, then something is wrong elsewhere,
2568 * and we cannot handle it here.
2570 if (!(edma_err_cause
& EDMA_ERR_SELF_DIS
)) {
2571 ata_port_printk(ap
, KERN_WARNING
,
2572 "%s: err_cause=0x%x pp_flags=0x%x\n",
2573 __func__
, edma_err_cause
, pp
->pp_flags
);
2574 return 0; /* not handled */
2576 return mv_handle_fbs_non_ncq_dev_err(ap
);
2578 return 0; /* not handled */
2581 static void mv_unexpected_intr(struct ata_port
*ap
, int edma_was_enabled
)
2583 struct ata_eh_info
*ehi
= &ap
->link
.eh_info
;
2584 char *when
= "idle";
2586 ata_ehi_clear_desc(ehi
);
2587 if (edma_was_enabled
) {
2588 when
= "EDMA enabled";
2590 struct ata_queued_cmd
*qc
= ata_qc_from_tag(ap
, ap
->link
.active_tag
);
2591 if (qc
&& (qc
->tf
.flags
& ATA_TFLAG_POLLING
))
2594 ata_ehi_push_desc(ehi
, "unexpected device interrupt while %s", when
);
2595 ehi
->err_mask
|= AC_ERR_OTHER
;
2596 ehi
->action
|= ATA_EH_RESET
;
2597 ata_port_freeze(ap
);
2601 * mv_err_intr - Handle error interrupts on the port
2602 * @ap: ATA channel to manipulate
2604 * Most cases require a full reset of the chip's state machine,
2605 * which also performs a COMRESET.
2606 * Also, if the port disabled DMA, update our cached copy to match.
2609 * Inherited from caller.
2611 static void mv_err_intr(struct ata_port
*ap
)
2613 void __iomem
*port_mmio
= mv_ap_base(ap
);
2614 u32 edma_err_cause
, eh_freeze_mask
, serr
= 0;
2616 struct mv_port_priv
*pp
= ap
->private_data
;
2617 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
2618 unsigned int action
= 0, err_mask
= 0;
2619 struct ata_eh_info
*ehi
= &ap
->link
.eh_info
;
2620 struct ata_queued_cmd
*qc
;
2624 * Read and clear the SError and err_cause bits.
2625 * For GenIIe, if EDMA_ERR_TRANS_IRQ_7 is set, we also must read/clear
2626 * the FIS_IRQ_CAUSE register before clearing edma_err_cause.
2628 sata_scr_read(&ap
->link
, SCR_ERROR
, &serr
);
2629 sata_scr_write_flush(&ap
->link
, SCR_ERROR
, serr
);
2631 edma_err_cause
= readl(port_mmio
+ EDMA_ERR_IRQ_CAUSE
);
2632 if (IS_GEN_IIE(hpriv
) && (edma_err_cause
& EDMA_ERR_TRANS_IRQ_7
)) {
2633 fis_cause
= readl(port_mmio
+ FIS_IRQ_CAUSE
);
2634 writelfl(~fis_cause
, port_mmio
+ FIS_IRQ_CAUSE
);
2636 writelfl(~edma_err_cause
, port_mmio
+ EDMA_ERR_IRQ_CAUSE
);
2638 if (edma_err_cause
& EDMA_ERR_DEV
) {
2640 * Device errors during FIS-based switching operation
2641 * require special handling.
2643 if (mv_handle_dev_err(ap
, edma_err_cause
))
2647 qc
= mv_get_active_qc(ap
);
2648 ata_ehi_clear_desc(ehi
);
2649 ata_ehi_push_desc(ehi
, "edma_err_cause=%08x pp_flags=%08x",
2650 edma_err_cause
, pp
->pp_flags
);
2652 if (IS_GEN_IIE(hpriv
) && (edma_err_cause
& EDMA_ERR_TRANS_IRQ_7
)) {
2653 ata_ehi_push_desc(ehi
, "fis_cause=%08x", fis_cause
);
2654 if (fis_cause
& FIS_IRQ_CAUSE_AN
) {
2655 u32 ec
= edma_err_cause
&
2656 ~(EDMA_ERR_TRANS_IRQ_7
| EDMA_ERR_IRQ_TRANSIENT
);
2657 sata_async_notification(ap
);
2659 return; /* Just an AN; no need for the nukes */
2660 ata_ehi_push_desc(ehi
, "SDB notify");
2664 * All generations share these EDMA error cause bits:
2666 if (edma_err_cause
& EDMA_ERR_DEV
) {
2667 err_mask
|= AC_ERR_DEV
;
2668 action
|= ATA_EH_RESET
;
2669 ata_ehi_push_desc(ehi
, "dev error");
2671 if (edma_err_cause
& (EDMA_ERR_D_PAR
| EDMA_ERR_PRD_PAR
|
2672 EDMA_ERR_CRQB_PAR
| EDMA_ERR_CRPB_PAR
|
2673 EDMA_ERR_INTRL_PAR
)) {
2674 err_mask
|= AC_ERR_ATA_BUS
;
2675 action
|= ATA_EH_RESET
;
2676 ata_ehi_push_desc(ehi
, "parity error");
2678 if (edma_err_cause
& (EDMA_ERR_DEV_DCON
| EDMA_ERR_DEV_CON
)) {
2679 ata_ehi_hotplugged(ehi
);
2680 ata_ehi_push_desc(ehi
, edma_err_cause
& EDMA_ERR_DEV_DCON
?
2681 "dev disconnect" : "dev connect");
2682 action
|= ATA_EH_RESET
;
2686 * Gen-I has a different SELF_DIS bit,
2687 * different FREEZE bits, and no SERR bit:
2689 if (IS_GEN_I(hpriv
)) {
2690 eh_freeze_mask
= EDMA_EH_FREEZE_5
;
2691 if (edma_err_cause
& EDMA_ERR_SELF_DIS_5
) {
2692 pp
->pp_flags
&= ~MV_PP_FLAG_EDMA_EN
;
2693 ata_ehi_push_desc(ehi
, "EDMA self-disable");
2696 eh_freeze_mask
= EDMA_EH_FREEZE
;
2697 if (edma_err_cause
& EDMA_ERR_SELF_DIS
) {
2698 pp
->pp_flags
&= ~MV_PP_FLAG_EDMA_EN
;
2699 ata_ehi_push_desc(ehi
, "EDMA self-disable");
2701 if (edma_err_cause
& EDMA_ERR_SERR
) {
2702 ata_ehi_push_desc(ehi
, "SError=%08x", serr
);
2703 err_mask
|= AC_ERR_ATA_BUS
;
2704 action
|= ATA_EH_RESET
;
2709 err_mask
= AC_ERR_OTHER
;
2710 action
|= ATA_EH_RESET
;
2713 ehi
->serror
|= serr
;
2714 ehi
->action
|= action
;
2717 qc
->err_mask
|= err_mask
;
2719 ehi
->err_mask
|= err_mask
;
2721 if (err_mask
== AC_ERR_DEV
) {
2723 * Cannot do ata_port_freeze() here,
2724 * because it would kill PIO access,
2725 * which is needed for further diagnosis.
2729 } else if (edma_err_cause
& eh_freeze_mask
) {
2731 * Note to self: ata_port_freeze() calls ata_port_abort()
2733 ata_port_freeze(ap
);
2740 ata_link_abort(qc
->dev
->link
);
2746 static void mv_process_crpb_response(struct ata_port
*ap
,
2747 struct mv_crpb
*response
, unsigned int tag
, int ncq_enabled
)
2750 u16 edma_status
= le16_to_cpu(response
->flags
);
2751 struct ata_queued_cmd
*qc
= ata_qc_from_tag(ap
, tag
);
2753 if (unlikely(!qc
)) {
2754 ata_port_printk(ap
, KERN_ERR
, "%s: no qc for tag=%d\n",
2760 * edma_status from a response queue entry:
2761 * LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only).
2762 * MSB is saved ATA status from command completion.
2765 u8 err_cause
= edma_status
& 0xff & ~EDMA_ERR_DEV
;
2768 * Error will be seen/handled by
2769 * mv_err_intr(). So do nothing at all here.
2774 ata_status
= edma_status
>> CRPB_FLAG_STATUS_SHIFT
;
2775 if (!ac_err_mask(ata_status
))
2776 ata_qc_complete(qc
);
2777 /* else: leave it for mv_err_intr() */
2780 static void mv_process_crpb_entries(struct ata_port
*ap
, struct mv_port_priv
*pp
)
2782 void __iomem
*port_mmio
= mv_ap_base(ap
);
2783 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
2785 bool work_done
= false;
2786 int ncq_enabled
= (pp
->pp_flags
& MV_PP_FLAG_NCQ_EN
);
2788 /* Get the hardware queue position index */
2789 in_index
= (readl(port_mmio
+ EDMA_RSP_Q_IN_PTR
)
2790 >> EDMA_RSP_Q_PTR_SHIFT
) & MV_MAX_Q_DEPTH_MASK
;
2792 /* Process new responses from since the last time we looked */
2793 while (in_index
!= pp
->resp_idx
) {
2795 struct mv_crpb
*response
= &pp
->crpb
[pp
->resp_idx
];
2797 pp
->resp_idx
= (pp
->resp_idx
+ 1) & MV_MAX_Q_DEPTH_MASK
;
2799 if (IS_GEN_I(hpriv
)) {
2800 /* 50xx: no NCQ, only one command active at a time */
2801 tag
= ap
->link
.active_tag
;
2803 /* Gen II/IIE: get command tag from CRPB entry */
2804 tag
= le16_to_cpu(response
->id
) & 0x1f;
2806 mv_process_crpb_response(ap
, response
, tag
, ncq_enabled
);
2810 /* Update the software queue position index in hardware */
2812 writelfl((pp
->crpb_dma
& EDMA_RSP_Q_BASE_LO_MASK
) |
2813 (pp
->resp_idx
<< EDMA_RSP_Q_PTR_SHIFT
),
2814 port_mmio
+ EDMA_RSP_Q_OUT_PTR
);
2817 static void mv_port_intr(struct ata_port
*ap
, u32 port_cause
)
2819 struct mv_port_priv
*pp
;
2820 int edma_was_enabled
;
2823 * Grab a snapshot of the EDMA_EN flag setting,
2824 * so that we have a consistent view for this port,
2825 * even if something we call of our routines changes it.
2827 pp
= ap
->private_data
;
2828 edma_was_enabled
= (pp
->pp_flags
& MV_PP_FLAG_EDMA_EN
);
2830 * Process completed CRPB response(s) before other events.
2832 if (edma_was_enabled
&& (port_cause
& DONE_IRQ
)) {
2833 mv_process_crpb_entries(ap
, pp
);
2834 if (pp
->pp_flags
& MV_PP_FLAG_DELAYED_EH
)
2835 mv_handle_fbs_ncq_dev_err(ap
);
2838 * Handle chip-reported errors, or continue on to handle PIO.
2840 if (unlikely(port_cause
& ERR_IRQ
)) {
2842 } else if (!edma_was_enabled
) {
2843 struct ata_queued_cmd
*qc
= mv_get_active_qc(ap
);
2845 ata_bmdma_port_intr(ap
, qc
);
2847 mv_unexpected_intr(ap
, edma_was_enabled
);
2852 * mv_host_intr - Handle all interrupts on the given host controller
2853 * @host: host specific structure
2854 * @main_irq_cause: Main interrupt cause register for the chip.
2857 * Inherited from caller.
2859 static int mv_host_intr(struct ata_host
*host
, u32 main_irq_cause
)
2861 struct mv_host_priv
*hpriv
= host
->private_data
;
2862 void __iomem
*mmio
= hpriv
->base
, *hc_mmio
;
2863 unsigned int handled
= 0, port
;
2865 /* If asserted, clear the "all ports" IRQ coalescing bit */
2866 if (main_irq_cause
& ALL_PORTS_COAL_DONE
)
2867 writel(~ALL_PORTS_COAL_IRQ
, mmio
+ IRQ_COAL_CAUSE
);
2869 for (port
= 0; port
< hpriv
->n_ports
; port
++) {
2870 struct ata_port
*ap
= host
->ports
[port
];
2871 unsigned int p
, shift
, hardport
, port_cause
;
2873 MV_PORT_TO_SHIFT_AND_HARDPORT(port
, shift
, hardport
);
2875 * Each hc within the host has its own hc_irq_cause register,
2876 * where the interrupting ports bits get ack'd.
2878 if (hardport
== 0) { /* first port on this hc ? */
2879 u32 hc_cause
= (main_irq_cause
>> shift
) & HC0_IRQ_PEND
;
2880 u32 port_mask
, ack_irqs
;
2882 * Skip this entire hc if nothing pending for any ports
2885 port
+= MV_PORTS_PER_HC
- 1;
2889 * We don't need/want to read the hc_irq_cause register,
2890 * because doing so hurts performance, and
2891 * main_irq_cause already gives us everything we need.
2893 * But we do have to *write* to the hc_irq_cause to ack
2894 * the ports that we are handling this time through.
2896 * This requires that we create a bitmap for those
2897 * ports which interrupted us, and use that bitmap
2898 * to ack (only) those ports via hc_irq_cause.
2901 if (hc_cause
& PORTS_0_3_COAL_DONE
)
2902 ack_irqs
= HC_COAL_IRQ
;
2903 for (p
= 0; p
< MV_PORTS_PER_HC
; ++p
) {
2904 if ((port
+ p
) >= hpriv
->n_ports
)
2906 port_mask
= (DONE_IRQ
| ERR_IRQ
) << (p
* 2);
2907 if (hc_cause
& port_mask
)
2908 ack_irqs
|= (DMA_IRQ
| DEV_IRQ
) << p
;
2910 hc_mmio
= mv_hc_base_from_port(mmio
, port
);
2911 writelfl(~ack_irqs
, hc_mmio
+ HC_IRQ_CAUSE
);
2915 * Handle interrupts signalled for this port:
2917 port_cause
= (main_irq_cause
>> shift
) & (DONE_IRQ
| ERR_IRQ
);
2919 mv_port_intr(ap
, port_cause
);
2924 static int mv_pci_error(struct ata_host
*host
, void __iomem
*mmio
)
2926 struct mv_host_priv
*hpriv
= host
->private_data
;
2927 struct ata_port
*ap
;
2928 struct ata_queued_cmd
*qc
;
2929 struct ata_eh_info
*ehi
;
2930 unsigned int i
, err_mask
, printed
= 0;
2933 err_cause
= readl(mmio
+ hpriv
->irq_cause_offset
);
2935 dev_printk(KERN_ERR
, host
->dev
, "PCI ERROR; PCI IRQ cause=0x%08x\n",
2938 DPRINTK("All regs @ PCI error\n");
2939 mv_dump_all_regs(mmio
, -1, to_pci_dev(host
->dev
));
2941 writelfl(0, mmio
+ hpriv
->irq_cause_offset
);
2943 for (i
= 0; i
< host
->n_ports
; i
++) {
2944 ap
= host
->ports
[i
];
2945 if (!ata_link_offline(&ap
->link
)) {
2946 ehi
= &ap
->link
.eh_info
;
2947 ata_ehi_clear_desc(ehi
);
2949 ata_ehi_push_desc(ehi
,
2950 "PCI err cause 0x%08x", err_cause
);
2951 err_mask
= AC_ERR_HOST_BUS
;
2952 ehi
->action
= ATA_EH_RESET
;
2953 qc
= ata_qc_from_tag(ap
, ap
->link
.active_tag
);
2955 qc
->err_mask
|= err_mask
;
2957 ehi
->err_mask
|= err_mask
;
2959 ata_port_freeze(ap
);
2962 return 1; /* handled */
2966 * mv_interrupt - Main interrupt event handler
2968 * @dev_instance: private data; in this case the host structure
2970 * Read the read only register to determine if any host
2971 * controllers have pending interrupts. If so, call lower level
2972 * routine to handle. Also check for PCI errors which are only
2976 * This routine holds the host lock while processing pending
2979 static irqreturn_t
mv_interrupt(int irq
, void *dev_instance
)
2981 struct ata_host
*host
= dev_instance
;
2982 struct mv_host_priv
*hpriv
= host
->private_data
;
2983 unsigned int handled
= 0;
2984 int using_msi
= hpriv
->hp_flags
& MV_HP_FLAG_MSI
;
2985 u32 main_irq_cause
, pending_irqs
;
2987 spin_lock(&host
->lock
);
2989 /* for MSI: block new interrupts while in here */
2991 mv_write_main_irq_mask(0, hpriv
);
2993 main_irq_cause
= readl(hpriv
->main_irq_cause_addr
);
2994 pending_irqs
= main_irq_cause
& hpriv
->main_irq_mask
;
2996 * Deal with cases where we either have nothing pending, or have read
2997 * a bogus register value which can indicate HW removal or PCI fault.
2999 if (pending_irqs
&& main_irq_cause
!= 0xffffffffU
) {
3000 if (unlikely((pending_irqs
& PCI_ERR
) && !IS_SOC(hpriv
)))
3001 handled
= mv_pci_error(host
, hpriv
->base
);
3003 handled
= mv_host_intr(host
, pending_irqs
);
3006 /* for MSI: unmask; interrupt cause bits will retrigger now */
3008 mv_write_main_irq_mask(hpriv
->main_irq_mask
, hpriv
);
3010 spin_unlock(&host
->lock
);
3012 return IRQ_RETVAL(handled
);
3015 static unsigned int mv5_scr_offset(unsigned int sc_reg_in
)
3019 switch (sc_reg_in
) {
3023 ofs
= sc_reg_in
* sizeof(u32
);
3032 static int mv5_scr_read(struct ata_link
*link
, unsigned int sc_reg_in
, u32
*val
)
3034 struct mv_host_priv
*hpriv
= link
->ap
->host
->private_data
;
3035 void __iomem
*mmio
= hpriv
->base
;
3036 void __iomem
*addr
= mv5_phy_base(mmio
, link
->ap
->port_no
);
3037 unsigned int ofs
= mv5_scr_offset(sc_reg_in
);
3039 if (ofs
!= 0xffffffffU
) {
3040 *val
= readl(addr
+ ofs
);
3046 static int mv5_scr_write(struct ata_link
*link
, unsigned int sc_reg_in
, u32 val
)
3048 struct mv_host_priv
*hpriv
= link
->ap
->host
->private_data
;
3049 void __iomem
*mmio
= hpriv
->base
;
3050 void __iomem
*addr
= mv5_phy_base(mmio
, link
->ap
->port_no
);
3051 unsigned int ofs
= mv5_scr_offset(sc_reg_in
);
3053 if (ofs
!= 0xffffffffU
) {
3054 writelfl(val
, addr
+ ofs
);
3060 static void mv5_reset_bus(struct ata_host
*host
, void __iomem
*mmio
)
3062 struct pci_dev
*pdev
= to_pci_dev(host
->dev
);
3065 early_5080
= (pdev
->device
== 0x5080) && (pdev
->revision
== 0);
3068 u32 tmp
= readl(mmio
+ MV_PCI_EXP_ROM_BAR_CTL
);
3070 writel(tmp
, mmio
+ MV_PCI_EXP_ROM_BAR_CTL
);
3073 mv_reset_pci_bus(host
, mmio
);
3076 static void mv5_reset_flash(struct mv_host_priv
*hpriv
, void __iomem
*mmio
)
3078 writel(0x0fcfffff, mmio
+ FLASH_CTL
);
3081 static void mv5_read_preamp(struct mv_host_priv
*hpriv
, int idx
,
3084 void __iomem
*phy_mmio
= mv5_phy_base(mmio
, idx
);
3087 tmp
= readl(phy_mmio
+ MV5_PHY_MODE
);
3089 hpriv
->signal
[idx
].pre
= tmp
& 0x1800; /* bits 12:11 */
3090 hpriv
->signal
[idx
].amps
= tmp
& 0xe0; /* bits 7:5 */
3093 static void mv5_enable_leds(struct mv_host_priv
*hpriv
, void __iomem
*mmio
)
3097 writel(0, mmio
+ GPIO_PORT_CTL
);
3099 /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
3101 tmp
= readl(mmio
+ MV_PCI_EXP_ROM_BAR_CTL
);
3103 writel(tmp
, mmio
+ MV_PCI_EXP_ROM_BAR_CTL
);
3106 static void mv5_phy_errata(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
3109 void __iomem
*phy_mmio
= mv5_phy_base(mmio
, port
);
3110 const u32 mask
= (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5);
3112 int fix_apm_sq
= (hpriv
->hp_flags
& MV_HP_ERRATA_50XXB0
);
3115 tmp
= readl(phy_mmio
+ MV5_LTMODE
);
3117 writel(tmp
, phy_mmio
+ MV5_LTMODE
);
3119 tmp
= readl(phy_mmio
+ MV5_PHY_CTL
);
3122 writel(tmp
, phy_mmio
+ MV5_PHY_CTL
);
3125 tmp
= readl(phy_mmio
+ MV5_PHY_MODE
);
3127 tmp
|= hpriv
->signal
[port
].pre
;
3128 tmp
|= hpriv
->signal
[port
].amps
;
3129 writel(tmp
, phy_mmio
+ MV5_PHY_MODE
);
3134 #define ZERO(reg) writel(0, port_mmio + (reg))
3135 static void mv5_reset_hc_port(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
3138 void __iomem
*port_mmio
= mv_port_base(mmio
, port
);
3140 mv_reset_channel(hpriv
, mmio
, port
);
3142 ZERO(0x028); /* command */
3143 writel(0x11f, port_mmio
+ EDMA_CFG
);
3144 ZERO(0x004); /* timer */
3145 ZERO(0x008); /* irq err cause */
3146 ZERO(0x00c); /* irq err mask */
3147 ZERO(0x010); /* rq bah */
3148 ZERO(0x014); /* rq inp */
3149 ZERO(0x018); /* rq outp */
3150 ZERO(0x01c); /* respq bah */
3151 ZERO(0x024); /* respq outp */
3152 ZERO(0x020); /* respq inp */
3153 ZERO(0x02c); /* test control */
3154 writel(0xbc, port_mmio
+ EDMA_IORDY_TMOUT
);
3158 #define ZERO(reg) writel(0, hc_mmio + (reg))
3159 static void mv5_reset_one_hc(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
3162 void __iomem
*hc_mmio
= mv_hc_base(mmio
, hc
);
3170 tmp
= readl(hc_mmio
+ 0x20);
3173 writel(tmp
, hc_mmio
+ 0x20);
3177 static int mv5_reset_hc(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
3180 unsigned int hc
, port
;
3182 for (hc
= 0; hc
< n_hc
; hc
++) {
3183 for (port
= 0; port
< MV_PORTS_PER_HC
; port
++)
3184 mv5_reset_hc_port(hpriv
, mmio
,
3185 (hc
* MV_PORTS_PER_HC
) + port
);
3187 mv5_reset_one_hc(hpriv
, mmio
, hc
);
3194 #define ZERO(reg) writel(0, mmio + (reg))
3195 static void mv_reset_pci_bus(struct ata_host
*host
, void __iomem
*mmio
)
3197 struct mv_host_priv
*hpriv
= host
->private_data
;
3200 tmp
= readl(mmio
+ MV_PCI_MODE
);
3202 writel(tmp
, mmio
+ MV_PCI_MODE
);
3204 ZERO(MV_PCI_DISC_TIMER
);
3205 ZERO(MV_PCI_MSI_TRIGGER
);
3206 writel(0x000100ff, mmio
+ MV_PCI_XBAR_TMOUT
);
3207 ZERO(MV_PCI_SERR_MASK
);
3208 ZERO(hpriv
->irq_cause_offset
);
3209 ZERO(hpriv
->irq_mask_offset
);
3210 ZERO(MV_PCI_ERR_LOW_ADDRESS
);
3211 ZERO(MV_PCI_ERR_HIGH_ADDRESS
);
3212 ZERO(MV_PCI_ERR_ATTRIBUTE
);
3213 ZERO(MV_PCI_ERR_COMMAND
);
3217 static void mv6_reset_flash(struct mv_host_priv
*hpriv
, void __iomem
*mmio
)
3221 mv5_reset_flash(hpriv
, mmio
);
3223 tmp
= readl(mmio
+ GPIO_PORT_CTL
);
3225 tmp
|= (1 << 5) | (1 << 6);
3226 writel(tmp
, mmio
+ GPIO_PORT_CTL
);
3230 * mv6_reset_hc - Perform the 6xxx global soft reset
3231 * @mmio: base address of the HBA
3233 * This routine only applies to 6xxx parts.
3236 * Inherited from caller.
3238 static int mv6_reset_hc(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
3241 void __iomem
*reg
= mmio
+ PCI_MAIN_CMD_STS
;
3245 /* Following procedure defined in PCI "main command and status
3249 writel(t
| STOP_PCI_MASTER
, reg
);
3251 for (i
= 0; i
< 1000; i
++) {
3254 if (PCI_MASTER_EMPTY
& t
)
3257 if (!(PCI_MASTER_EMPTY
& t
)) {
3258 printk(KERN_ERR DRV_NAME
": PCI master won't flush\n");
3266 writel(t
| GLOB_SFT_RST
, reg
);
3269 } while (!(GLOB_SFT_RST
& t
) && (i
-- > 0));
3271 if (!(GLOB_SFT_RST
& t
)) {
3272 printk(KERN_ERR DRV_NAME
": can't set global reset\n");
3277 /* clear reset and *reenable the PCI master* (not mentioned in spec) */
3280 writel(t
& ~(GLOB_SFT_RST
| STOP_PCI_MASTER
), reg
);
3283 } while ((GLOB_SFT_RST
& t
) && (i
-- > 0));
3285 if (GLOB_SFT_RST
& t
) {
3286 printk(KERN_ERR DRV_NAME
": can't clear global reset\n");
3293 static void mv6_read_preamp(struct mv_host_priv
*hpriv
, int idx
,
3296 void __iomem
*port_mmio
;
3299 tmp
= readl(mmio
+ RESET_CFG
);
3300 if ((tmp
& (1 << 0)) == 0) {
3301 hpriv
->signal
[idx
].amps
= 0x7 << 8;
3302 hpriv
->signal
[idx
].pre
= 0x1 << 5;
3306 port_mmio
= mv_port_base(mmio
, idx
);
3307 tmp
= readl(port_mmio
+ PHY_MODE2
);
3309 hpriv
->signal
[idx
].amps
= tmp
& 0x700; /* bits 10:8 */
3310 hpriv
->signal
[idx
].pre
= tmp
& 0xe0; /* bits 7:5 */
3313 static void mv6_enable_leds(struct mv_host_priv
*hpriv
, void __iomem
*mmio
)
3315 writel(0x00000060, mmio
+ GPIO_PORT_CTL
);
3318 static void mv6_phy_errata(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
3321 void __iomem
*port_mmio
= mv_port_base(mmio
, port
);
3323 u32 hp_flags
= hpriv
->hp_flags
;
3325 hp_flags
& (MV_HP_ERRATA_60X1B2
| MV_HP_ERRATA_60X1C0
);
3327 hp_flags
& (MV_HP_ERRATA_60X1B2
| MV_HP_ERRATA_60X1C0
);
3330 if (fix_phy_mode2
) {
3331 m2
= readl(port_mmio
+ PHY_MODE2
);
3334 writel(m2
, port_mmio
+ PHY_MODE2
);
3338 m2
= readl(port_mmio
+ PHY_MODE2
);
3339 m2
&= ~((1 << 16) | (1 << 31));
3340 writel(m2
, port_mmio
+ PHY_MODE2
);
3346 * Gen-II/IIe PHY_MODE3 errata RM#2:
3347 * Achieves better receiver noise performance than the h/w default:
3349 m3
= readl(port_mmio
+ PHY_MODE3
);
3350 m3
= (m3
& 0x1f) | (0x5555601 << 5);
3352 /* Guideline 88F5182 (GL# SATA-S11) */
3356 if (fix_phy_mode4
) {
3357 u32 m4
= readl(port_mmio
+ PHY_MODE4
);
3359 * Enforce reserved-bit restrictions on GenIIe devices only.
3360 * For earlier chipsets, force only the internal config field
3361 * (workaround for errata FEr SATA#10 part 1).
3363 if (IS_GEN_IIE(hpriv
))
3364 m4
= (m4
& ~PHY_MODE4_RSVD_ZEROS
) | PHY_MODE4_RSVD_ONES
;
3366 m4
= (m4
& ~PHY_MODE4_CFG_MASK
) | PHY_MODE4_CFG_VALUE
;
3367 writel(m4
, port_mmio
+ PHY_MODE4
);
3370 * Workaround for 60x1-B2 errata SATA#13:
3371 * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
3372 * so we must always rewrite PHY_MODE3 after PHY_MODE4.
3373 * Or ensure we use writelfl() when writing PHY_MODE4.
3375 writel(m3
, port_mmio
+ PHY_MODE3
);
3377 /* Revert values of pre-emphasis and signal amps to the saved ones */
3378 m2
= readl(port_mmio
+ PHY_MODE2
);
3380 m2
&= ~MV_M2_PREAMP_MASK
;
3381 m2
|= hpriv
->signal
[port
].amps
;
3382 m2
|= hpriv
->signal
[port
].pre
;
3385 /* according to mvSata 3.6.1, some IIE values are fixed */
3386 if (IS_GEN_IIE(hpriv
)) {
3391 writel(m2
, port_mmio
+ PHY_MODE2
);
3394 /* TODO: use the generic LED interface to configure the SATA Presence */
3395 /* & Acitivy LEDs on the board */
3396 static void mv_soc_enable_leds(struct mv_host_priv
*hpriv
,
3402 static void mv_soc_read_preamp(struct mv_host_priv
*hpriv
, int idx
,
3405 void __iomem
*port_mmio
;
3408 port_mmio
= mv_port_base(mmio
, idx
);
3409 tmp
= readl(port_mmio
+ PHY_MODE2
);
3411 hpriv
->signal
[idx
].amps
= tmp
& 0x700; /* bits 10:8 */
3412 hpriv
->signal
[idx
].pre
= tmp
& 0xe0; /* bits 7:5 */
3416 #define ZERO(reg) writel(0, port_mmio + (reg))
3417 static void mv_soc_reset_hc_port(struct mv_host_priv
*hpriv
,
3418 void __iomem
*mmio
, unsigned int port
)
3420 void __iomem
*port_mmio
= mv_port_base(mmio
, port
);
3422 mv_reset_channel(hpriv
, mmio
, port
);
3424 ZERO(0x028); /* command */
3425 writel(0x101f, port_mmio
+ EDMA_CFG
);
3426 ZERO(0x004); /* timer */
3427 ZERO(0x008); /* irq err cause */
3428 ZERO(0x00c); /* irq err mask */
3429 ZERO(0x010); /* rq bah */
3430 ZERO(0x014); /* rq inp */
3431 ZERO(0x018); /* rq outp */
3432 ZERO(0x01c); /* respq bah */
3433 ZERO(0x024); /* respq outp */
3434 ZERO(0x020); /* respq inp */
3435 ZERO(0x02c); /* test control */
3436 writel(0x800, port_mmio
+ EDMA_IORDY_TMOUT
);
3441 #define ZERO(reg) writel(0, hc_mmio + (reg))
3442 static void mv_soc_reset_one_hc(struct mv_host_priv
*hpriv
,
3445 void __iomem
*hc_mmio
= mv_hc_base(mmio
, 0);
3455 static int mv_soc_reset_hc(struct mv_host_priv
*hpriv
,
3456 void __iomem
*mmio
, unsigned int n_hc
)
3460 for (port
= 0; port
< hpriv
->n_ports
; port
++)
3461 mv_soc_reset_hc_port(hpriv
, mmio
, port
);
3463 mv_soc_reset_one_hc(hpriv
, mmio
);
3468 static void mv_soc_reset_flash(struct mv_host_priv
*hpriv
,
3474 static void mv_soc_reset_bus(struct ata_host
*host
, void __iomem
*mmio
)
3479 static void mv_soc_65n_phy_errata(struct mv_host_priv
*hpriv
,
3480 void __iomem
*mmio
, unsigned int port
)
3482 void __iomem
*port_mmio
= mv_port_base(mmio
, port
);
3485 reg
= readl(port_mmio
+ PHY_MODE3
);
3486 reg
&= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */
3488 reg
&= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */
3490 writel(reg
, port_mmio
+ PHY_MODE3
);
3492 reg
= readl(port_mmio
+ PHY_MODE4
);
3493 reg
&= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
3495 writel(reg
, port_mmio
+ PHY_MODE4
);
3497 reg
= readl(port_mmio
+ PHY_MODE9_GEN2
);
3498 reg
&= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
3500 reg
&= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
3501 writel(reg
, port_mmio
+ PHY_MODE9_GEN2
);
3503 reg
= readl(port_mmio
+ PHY_MODE9_GEN1
);
3504 reg
&= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
3506 reg
&= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
3507 writel(reg
, port_mmio
+ PHY_MODE9_GEN1
);
3511 * soc_is_65 - check if the soc is 65 nano device
3513 * Detect the type of the SoC, this is done by reading the PHYCFG_OFS
3514 * register, this register should contain non-zero value and it exists only
3515 * in the 65 nano devices, when reading it from older devices we get 0.
3517 static bool soc_is_65n(struct mv_host_priv
*hpriv
)
3519 void __iomem
*port0_mmio
= mv_port_base(hpriv
->base
, 0);
3521 if (readl(port0_mmio
+ PHYCFG_OFS
))
3526 static void mv_setup_ifcfg(void __iomem
*port_mmio
, int want_gen2i
)
3528 u32 ifcfg
= readl(port_mmio
+ SATA_IFCFG
);
3530 ifcfg
= (ifcfg
& 0xf7f) | 0x9b1000; /* from chip spec */
3532 ifcfg
|= (1 << 7); /* enable gen2i speed */
3533 writelfl(ifcfg
, port_mmio
+ SATA_IFCFG
);
3536 static void mv_reset_channel(struct mv_host_priv
*hpriv
, void __iomem
*mmio
,
3537 unsigned int port_no
)
3539 void __iomem
*port_mmio
= mv_port_base(mmio
, port_no
);
3542 * The datasheet warns against setting EDMA_RESET when EDMA is active
3543 * (but doesn't say what the problem might be). So we first try
3544 * to disable the EDMA engine before doing the EDMA_RESET operation.
3546 mv_stop_edma_engine(port_mmio
);
3547 writelfl(EDMA_RESET
, port_mmio
+ EDMA_CMD
);
3549 if (!IS_GEN_I(hpriv
)) {
3550 /* Enable 3.0gb/s link speed: this survives EDMA_RESET */
3551 mv_setup_ifcfg(port_mmio
, 1);
3554 * Strobing EDMA_RESET here causes a hard reset of the SATA transport,
3555 * link, and physical layers. It resets all SATA interface registers
3556 * (except for SATA_IFCFG), and issues a COMRESET to the dev.
3558 writelfl(EDMA_RESET
, port_mmio
+ EDMA_CMD
);
3559 udelay(25); /* allow reset propagation */
3560 writelfl(0, port_mmio
+ EDMA_CMD
);
3562 hpriv
->ops
->phy_errata(hpriv
, mmio
, port_no
);
3564 if (IS_GEN_I(hpriv
))
3568 static void mv_pmp_select(struct ata_port
*ap
, int pmp
)
3570 if (sata_pmp_supported(ap
)) {
3571 void __iomem
*port_mmio
= mv_ap_base(ap
);
3572 u32 reg
= readl(port_mmio
+ SATA_IFCTL
);
3573 int old
= reg
& 0xf;
3576 reg
= (reg
& ~0xf) | pmp
;
3577 writelfl(reg
, port_mmio
+ SATA_IFCTL
);
3582 static int mv_pmp_hardreset(struct ata_link
*link
, unsigned int *class,
3583 unsigned long deadline
)
3585 mv_pmp_select(link
->ap
, sata_srst_pmp(link
));
3586 return sata_std_hardreset(link
, class, deadline
);
3589 static int mv_softreset(struct ata_link
*link
, unsigned int *class,
3590 unsigned long deadline
)
3592 mv_pmp_select(link
->ap
, sata_srst_pmp(link
));
3593 return ata_sff_softreset(link
, class, deadline
);
3596 static int mv_hardreset(struct ata_link
*link
, unsigned int *class,
3597 unsigned long deadline
)
3599 struct ata_port
*ap
= link
->ap
;
3600 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
3601 struct mv_port_priv
*pp
= ap
->private_data
;
3602 void __iomem
*mmio
= hpriv
->base
;
3603 int rc
, attempts
= 0, extra
= 0;
3607 mv_reset_channel(hpriv
, mmio
, ap
->port_no
);
3608 pp
->pp_flags
&= ~MV_PP_FLAG_EDMA_EN
;
3610 ~(MV_PP_FLAG_FBS_EN
| MV_PP_FLAG_NCQ_EN
| MV_PP_FLAG_FAKE_ATA_BUSY
);
3612 /* Workaround for errata FEr SATA#10 (part 2) */
3614 const unsigned long *timing
=
3615 sata_ehc_deb_timing(&link
->eh_context
);
3617 rc
= sata_link_hardreset(link
, timing
, deadline
+ extra
,
3619 rc
= online
? -EAGAIN
: rc
;
3622 sata_scr_read(link
, SCR_STATUS
, &sstatus
);
3623 if (!IS_GEN_I(hpriv
) && ++attempts
>= 5 && sstatus
== 0x121) {
3624 /* Force 1.5gb/s link speed and try again */
3625 mv_setup_ifcfg(mv_ap_base(ap
), 0);
3626 if (time_after(jiffies
+ HZ
, deadline
))
3627 extra
= HZ
; /* only extend it once, max */
3629 } while (sstatus
!= 0x0 && sstatus
!= 0x113 && sstatus
!= 0x123);
3630 mv_save_cached_regs(ap
);
3631 mv_edma_cfg(ap
, 0, 0);
3636 static void mv_eh_freeze(struct ata_port
*ap
)
3639 mv_enable_port_irqs(ap
, 0);
3642 static void mv_eh_thaw(struct ata_port
*ap
)
3644 struct mv_host_priv
*hpriv
= ap
->host
->private_data
;
3645 unsigned int port
= ap
->port_no
;
3646 unsigned int hardport
= mv_hardport_from_port(port
);
3647 void __iomem
*hc_mmio
= mv_hc_base_from_port(hpriv
->base
, port
);
3648 void __iomem
*port_mmio
= mv_ap_base(ap
);
3651 /* clear EDMA errors on this port */
3652 writel(0, port_mmio
+ EDMA_ERR_IRQ_CAUSE
);
3654 /* clear pending irq events */
3655 hc_irq_cause
= ~((DEV_IRQ
| DMA_IRQ
) << hardport
);
3656 writelfl(hc_irq_cause
, hc_mmio
+ HC_IRQ_CAUSE
);
3658 mv_enable_port_irqs(ap
, ERR_IRQ
);
3662 * mv_port_init - Perform some early initialization on a single port.
3663 * @port: libata data structure storing shadow register addresses
3664 * @port_mmio: base address of the port
3666 * Initialize shadow register mmio addresses, clear outstanding
3667 * interrupts on the port, and unmask interrupts for the future
3668 * start of the port.
3671 * Inherited from caller.
3673 static void mv_port_init(struct ata_ioports
*port
, void __iomem
*port_mmio
)
3675 void __iomem
*serr
, *shd_base
= port_mmio
+ SHD_BLK
;
3677 /* PIO related setup
3679 port
->data_addr
= shd_base
+ (sizeof(u32
) * ATA_REG_DATA
);
3681 port
->feature_addr
= shd_base
+ (sizeof(u32
) * ATA_REG_ERR
);
3682 port
->nsect_addr
= shd_base
+ (sizeof(u32
) * ATA_REG_NSECT
);
3683 port
->lbal_addr
= shd_base
+ (sizeof(u32
) * ATA_REG_LBAL
);
3684 port
->lbam_addr
= shd_base
+ (sizeof(u32
) * ATA_REG_LBAM
);
3685 port
->lbah_addr
= shd_base
+ (sizeof(u32
) * ATA_REG_LBAH
);
3686 port
->device_addr
= shd_base
+ (sizeof(u32
) * ATA_REG_DEVICE
);
3688 port
->command_addr
= shd_base
+ (sizeof(u32
) * ATA_REG_STATUS
);
3689 /* special case: control/altstatus doesn't have ATA_REG_ address */
3690 port
->altstatus_addr
= port
->ctl_addr
= shd_base
+ SHD_CTL_AST
;
3692 /* Clear any currently outstanding port interrupt conditions */
3693 serr
= port_mmio
+ mv_scr_offset(SCR_ERROR
);
3694 writelfl(readl(serr
), serr
);
3695 writelfl(0, port_mmio
+ EDMA_ERR_IRQ_CAUSE
);
3697 /* unmask all non-transient EDMA error interrupts */
3698 writelfl(~EDMA_ERR_IRQ_TRANSIENT
, port_mmio
+ EDMA_ERR_IRQ_MASK
);
3700 VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
3701 readl(port_mmio
+ EDMA_CFG
),
3702 readl(port_mmio
+ EDMA_ERR_IRQ_CAUSE
),
3703 readl(port_mmio
+ EDMA_ERR_IRQ_MASK
));
3706 static unsigned int mv_in_pcix_mode(struct ata_host
*host
)
3708 struct mv_host_priv
*hpriv
= host
->private_data
;
3709 void __iomem
*mmio
= hpriv
->base
;
3712 if (IS_SOC(hpriv
) || !IS_PCIE(hpriv
))
3713 return 0; /* not PCI-X capable */
3714 reg
= readl(mmio
+ MV_PCI_MODE
);
3715 if ((reg
& MV_PCI_MODE_MASK
) == 0)
3716 return 0; /* conventional PCI mode */
3717 return 1; /* chip is in PCI-X mode */
3720 static int mv_pci_cut_through_okay(struct ata_host
*host
)
3722 struct mv_host_priv
*hpriv
= host
->private_data
;
3723 void __iomem
*mmio
= hpriv
->base
;
3726 if (!mv_in_pcix_mode(host
)) {
3727 reg
= readl(mmio
+ MV_PCI_COMMAND
);
3728 if (reg
& MV_PCI_COMMAND_MRDTRIG
)
3729 return 0; /* not okay */
3731 return 1; /* okay */
3734 static void mv_60x1b2_errata_pci7(struct ata_host
*host
)
3736 struct mv_host_priv
*hpriv
= host
->private_data
;
3737 void __iomem
*mmio
= hpriv
->base
;
3739 /* workaround for 60x1-B2 errata PCI#7 */
3740 if (mv_in_pcix_mode(host
)) {
3741 u32 reg
= readl(mmio
+ MV_PCI_COMMAND
);
3742 writelfl(reg
& ~MV_PCI_COMMAND_MWRCOM
, mmio
+ MV_PCI_COMMAND
);
3746 static int mv_chip_id(struct ata_host
*host
, unsigned int board_idx
)
3748 struct pci_dev
*pdev
= to_pci_dev(host
->dev
);
3749 struct mv_host_priv
*hpriv
= host
->private_data
;
3750 u32 hp_flags
= hpriv
->hp_flags
;
3752 switch (board_idx
) {
3754 hpriv
->ops
= &mv5xxx_ops
;
3755 hp_flags
|= MV_HP_GEN_I
;
3757 switch (pdev
->revision
) {
3759 hp_flags
|= MV_HP_ERRATA_50XXB0
;
3762 hp_flags
|= MV_HP_ERRATA_50XXB2
;
3765 dev_printk(KERN_WARNING
, &pdev
->dev
,
3766 "Applying 50XXB2 workarounds to unknown rev\n");
3767 hp_flags
|= MV_HP_ERRATA_50XXB2
;
3774 hpriv
->ops
= &mv5xxx_ops
;
3775 hp_flags
|= MV_HP_GEN_I
;
3777 switch (pdev
->revision
) {
3779 hp_flags
|= MV_HP_ERRATA_50XXB0
;
3782 hp_flags
|= MV_HP_ERRATA_50XXB2
;
3785 dev_printk(KERN_WARNING
, &pdev
->dev
,
3786 "Applying B2 workarounds to unknown rev\n");
3787 hp_flags
|= MV_HP_ERRATA_50XXB2
;
3794 hpriv
->ops
= &mv6xxx_ops
;
3795 hp_flags
|= MV_HP_GEN_II
;
3797 switch (pdev
->revision
) {
3799 mv_60x1b2_errata_pci7(host
);
3800 hp_flags
|= MV_HP_ERRATA_60X1B2
;
3803 hp_flags
|= MV_HP_ERRATA_60X1C0
;
3806 dev_printk(KERN_WARNING
, &pdev
->dev
,
3807 "Applying B2 workarounds to unknown rev\n");
3808 hp_flags
|= MV_HP_ERRATA_60X1B2
;
3814 hp_flags
|= MV_HP_PCIE
| MV_HP_CUT_THROUGH
;
3815 if (pdev
->vendor
== PCI_VENDOR_ID_TTI
&&
3816 (pdev
->device
== 0x2300 || pdev
->device
== 0x2310))
3819 * Highpoint RocketRAID PCIe 23xx series cards:
3821 * Unconfigured drives are treated as "Legacy"
3822 * by the BIOS, and it overwrites sector 8 with
3823 * a "Lgcy" metadata block prior to Linux boot.
3825 * Configured drives (RAID or JBOD) leave sector 8
3826 * alone, but instead overwrite a high numbered
3827 * sector for the RAID metadata. This sector can
3828 * be determined exactly, by truncating the physical
3829 * drive capacity to a nice even GB value.
3831 * RAID metadata is at: (dev->n_sectors & ~0xfffff)
3833 * Warn the user, lest they think we're just buggy.
3835 printk(KERN_WARNING DRV_NAME
": Highpoint RocketRAID"
3836 " BIOS CORRUPTS DATA on all attached drives,"
3837 " regardless of if/how they are configured."
3839 printk(KERN_WARNING DRV_NAME
": For data safety, do not"
3840 " use sectors 8-9 on \"Legacy\" drives,"
3841 " and avoid the final two gigabytes on"
3842 " all RocketRAID BIOS initialized drives.\n");
3846 hpriv
->ops
= &mv6xxx_ops
;
3847 hp_flags
|= MV_HP_GEN_IIE
;
3848 if (board_idx
== chip_6042
&& mv_pci_cut_through_okay(host
))
3849 hp_flags
|= MV_HP_CUT_THROUGH
;
3851 switch (pdev
->revision
) {
3852 case 0x2: /* Rev.B0: the first/only public release */
3853 hp_flags
|= MV_HP_ERRATA_60X1C0
;
3856 dev_printk(KERN_WARNING
, &pdev
->dev
,
3857 "Applying 60X1C0 workarounds to unknown rev\n");
3858 hp_flags
|= MV_HP_ERRATA_60X1C0
;
3863 if (soc_is_65n(hpriv
))
3864 hpriv
->ops
= &mv_soc_65n_ops
;
3866 hpriv
->ops
= &mv_soc_ops
;
3867 hp_flags
|= MV_HP_FLAG_SOC
| MV_HP_GEN_IIE
|
3868 MV_HP_ERRATA_60X1C0
;
3872 dev_printk(KERN_ERR
, host
->dev
,
3873 "BUG: invalid board index %u\n", board_idx
);
3877 hpriv
->hp_flags
= hp_flags
;
3878 if (hp_flags
& MV_HP_PCIE
) {
3879 hpriv
->irq_cause_offset
= PCIE_IRQ_CAUSE
;
3880 hpriv
->irq_mask_offset
= PCIE_IRQ_MASK
;
3881 hpriv
->unmask_all_irqs
= PCIE_UNMASK_ALL_IRQS
;
3883 hpriv
->irq_cause_offset
= PCI_IRQ_CAUSE
;
3884 hpriv
->irq_mask_offset
= PCI_IRQ_MASK
;
3885 hpriv
->unmask_all_irqs
= PCI_UNMASK_ALL_IRQS
;
3892 * mv_init_host - Perform some early initialization of the host.
3893 * @host: ATA host to initialize
3895 * If possible, do an early global reset of the host. Then do
3896 * our port init and clear/unmask all/relevant host interrupts.
3899 * Inherited from caller.
3901 static int mv_init_host(struct ata_host
*host
)
3903 int rc
= 0, n_hc
, port
, hc
;
3904 struct mv_host_priv
*hpriv
= host
->private_data
;
3905 void __iomem
*mmio
= hpriv
->base
;
3907 rc
= mv_chip_id(host
, hpriv
->board_idx
);
3911 if (IS_SOC(hpriv
)) {
3912 hpriv
->main_irq_cause_addr
= mmio
+ SOC_HC_MAIN_IRQ_CAUSE
;
3913 hpriv
->main_irq_mask_addr
= mmio
+ SOC_HC_MAIN_IRQ_MASK
;
3915 hpriv
->main_irq_cause_addr
= mmio
+ PCI_HC_MAIN_IRQ_CAUSE
;
3916 hpriv
->main_irq_mask_addr
= mmio
+ PCI_HC_MAIN_IRQ_MASK
;
3919 /* initialize shadow irq mask with register's value */
3920 hpriv
->main_irq_mask
= readl(hpriv
->main_irq_mask_addr
);
3922 /* global interrupt mask: 0 == mask everything */
3923 mv_set_main_irq_mask(host
, ~0, 0);
3925 n_hc
= mv_get_hc_count(host
->ports
[0]->flags
);
3927 for (port
= 0; port
< host
->n_ports
; port
++)
3928 if (hpriv
->ops
->read_preamp
)
3929 hpriv
->ops
->read_preamp(hpriv
, port
, mmio
);
3931 rc
= hpriv
->ops
->reset_hc(hpriv
, mmio
, n_hc
);
3935 hpriv
->ops
->reset_flash(hpriv
, mmio
);
3936 hpriv
->ops
->reset_bus(host
, mmio
);
3937 hpriv
->ops
->enable_leds(hpriv
, mmio
);
3939 for (port
= 0; port
< host
->n_ports
; port
++) {
3940 struct ata_port
*ap
= host
->ports
[port
];
3941 void __iomem
*port_mmio
= mv_port_base(mmio
, port
);
3943 mv_port_init(&ap
->ioaddr
, port_mmio
);
3946 for (hc
= 0; hc
< n_hc
; hc
++) {
3947 void __iomem
*hc_mmio
= mv_hc_base(mmio
, hc
);
3949 VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
3950 "(before clear)=0x%08x\n", hc
,
3951 readl(hc_mmio
+ HC_CFG
),
3952 readl(hc_mmio
+ HC_IRQ_CAUSE
));
3954 /* Clear any currently outstanding hc interrupt conditions */
3955 writelfl(0, hc_mmio
+ HC_IRQ_CAUSE
);
3958 if (!IS_SOC(hpriv
)) {
3959 /* Clear any currently outstanding host interrupt conditions */
3960 writelfl(0, mmio
+ hpriv
->irq_cause_offset
);
3962 /* and unmask interrupt generation for host regs */
3963 writelfl(hpriv
->unmask_all_irqs
, mmio
+ hpriv
->irq_mask_offset
);
3967 * enable only global host interrupts for now.
3968 * The per-port interrupts get done later as ports are set up.
3970 mv_set_main_irq_mask(host
, 0, PCI_ERR
);
3971 mv_set_irq_coalescing(host
, irq_coalescing_io_count
,
3972 irq_coalescing_usecs
);
3977 static int mv_create_dma_pools(struct mv_host_priv
*hpriv
, struct device
*dev
)
3979 hpriv
->crqb_pool
= dmam_pool_create("crqb_q", dev
, MV_CRQB_Q_SZ
,
3981 if (!hpriv
->crqb_pool
)
3984 hpriv
->crpb_pool
= dmam_pool_create("crpb_q", dev
, MV_CRPB_Q_SZ
,
3986 if (!hpriv
->crpb_pool
)
3989 hpriv
->sg_tbl_pool
= dmam_pool_create("sg_tbl", dev
, MV_SG_TBL_SZ
,
3991 if (!hpriv
->sg_tbl_pool
)
3997 static void mv_conf_mbus_windows(struct mv_host_priv
*hpriv
,
3998 struct mbus_dram_target_info
*dram
)
4002 for (i
= 0; i
< 4; i
++) {
4003 writel(0, hpriv
->base
+ WINDOW_CTRL(i
));
4004 writel(0, hpriv
->base
+ WINDOW_BASE(i
));
4007 for (i
= 0; i
< dram
->num_cs
; i
++) {
4008 struct mbus_dram_window
*cs
= dram
->cs
+ i
;
4010 writel(((cs
->size
- 1) & 0xffff0000) |
4011 (cs
->mbus_attr
<< 8) |
4012 (dram
->mbus_dram_target_id
<< 4) | 1,
4013 hpriv
->base
+ WINDOW_CTRL(i
));
4014 writel(cs
->base
, hpriv
->base
+ WINDOW_BASE(i
));
4019 * mv_platform_probe - handle a positive probe of an soc Marvell
4021 * @pdev: platform device found
4024 * Inherited from caller.
4026 static int mv_platform_probe(struct platform_device
*pdev
)
4028 static int printed_version
;
4029 const struct mv_sata_platform_data
*mv_platform_data
;
4030 const struct ata_port_info
*ppi
[] =
4031 { &mv_port_info
[chip_soc
], NULL
};
4032 struct ata_host
*host
;
4033 struct mv_host_priv
*hpriv
;
4034 struct resource
*res
;
4037 if (!printed_version
++)
4038 dev_printk(KERN_INFO
, &pdev
->dev
, "version " DRV_VERSION
"\n");
4041 * Simple resource validation ..
4043 if (unlikely(pdev
->num_resources
!= 2)) {
4044 dev_err(&pdev
->dev
, "invalid number of resources\n");
4049 * Get the register base first
4051 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
4056 mv_platform_data
= pdev
->dev
.platform_data
;
4057 n_ports
= mv_platform_data
->n_ports
;
4059 host
= ata_host_alloc_pinfo(&pdev
->dev
, ppi
, n_ports
);
4060 hpriv
= devm_kzalloc(&pdev
->dev
, sizeof(*hpriv
), GFP_KERNEL
);
4062 if (!host
|| !hpriv
)
4064 host
->private_data
= hpriv
;
4065 hpriv
->n_ports
= n_ports
;
4066 hpriv
->board_idx
= chip_soc
;
4069 hpriv
->base
= devm_ioremap(&pdev
->dev
, res
->start
,
4070 resource_size(res
));
4071 hpriv
->base
-= SATAHC0_REG_BASE
;
4073 #if defined(CONFIG_HAVE_CLK)
4074 hpriv
->clk
= clk_get(&pdev
->dev
, NULL
);
4075 if (IS_ERR(hpriv
->clk
))
4076 dev_notice(&pdev
->dev
, "cannot get clkdev\n");
4078 clk_enable(hpriv
->clk
);
4082 * (Re-)program MBUS remapping windows if we are asked to.
4084 if (mv_platform_data
->dram
!= NULL
)
4085 mv_conf_mbus_windows(hpriv
, mv_platform_data
->dram
);
4087 rc
= mv_create_dma_pools(hpriv
, &pdev
->dev
);
4091 /* initialize adapter */
4092 rc
= mv_init_host(host
);
4096 dev_printk(KERN_INFO
, &pdev
->dev
,
4097 "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH
,
4100 return ata_host_activate(host
, platform_get_irq(pdev
, 0), mv_interrupt
,
4101 IRQF_SHARED
, &mv6_sht
);
4103 #if defined(CONFIG_HAVE_CLK)
4104 if (!IS_ERR(hpriv
->clk
)) {
4105 clk_disable(hpriv
->clk
);
4106 clk_put(hpriv
->clk
);
4115 * mv_platform_remove - unplug a platform interface
4116 * @pdev: platform device
4118 * A platform bus SATA device has been unplugged. Perform the needed
4119 * cleanup. Also called on module unload for any active devices.
4121 static int __devexit
mv_platform_remove(struct platform_device
*pdev
)
4123 struct device
*dev
= &pdev
->dev
;
4124 struct ata_host
*host
= dev_get_drvdata(dev
);
4125 #if defined(CONFIG_HAVE_CLK)
4126 struct mv_host_priv
*hpriv
= host
->private_data
;
4128 ata_host_detach(host
);
4130 #if defined(CONFIG_HAVE_CLK)
4131 if (!IS_ERR(hpriv
->clk
)) {
4132 clk_disable(hpriv
->clk
);
4133 clk_put(hpriv
->clk
);
4140 static int mv_platform_suspend(struct platform_device
*pdev
, pm_message_t state
)
4142 struct ata_host
*host
= dev_get_drvdata(&pdev
->dev
);
4144 return ata_host_suspend(host
, state
);
4149 static int mv_platform_resume(struct platform_device
*pdev
)
4151 struct ata_host
*host
= dev_get_drvdata(&pdev
->dev
);
4155 struct mv_host_priv
*hpriv
= host
->private_data
;
4156 const struct mv_sata_platform_data
*mv_platform_data
= \
4157 pdev
->dev
.platform_data
;
4159 * (Re-)program MBUS remapping windows if we are asked to.
4161 if (mv_platform_data
->dram
!= NULL
)
4162 mv_conf_mbus_windows(hpriv
, mv_platform_data
->dram
);
4164 /* initialize adapter */
4165 ret
= mv_init_host(host
);
4167 printk(KERN_ERR DRV_NAME
": Error during HW init\n");
4170 ata_host_resume(host
);
4176 #define mv_platform_suspend NULL
4177 #define mv_platform_resume NULL
4180 static struct platform_driver mv_platform_driver
= {
4181 .probe
= mv_platform_probe
,
4182 .remove
= __devexit_p(mv_platform_remove
),
4183 .suspend
= mv_platform_suspend
,
4184 .resume
= mv_platform_resume
,
4187 .owner
= THIS_MODULE
,
4193 static int mv_pci_init_one(struct pci_dev
*pdev
,
4194 const struct pci_device_id
*ent
);
4196 static int mv_pci_device_resume(struct pci_dev
*pdev
);
4200 static struct pci_driver mv_pci_driver
= {
4202 .id_table
= mv_pci_tbl
,
4203 .probe
= mv_pci_init_one
,
4204 .remove
= ata_pci_remove_one
,
4206 .suspend
= ata_pci_device_suspend
,
4207 .resume
= mv_pci_device_resume
,
4212 /* move to PCI layer or libata core? */
4213 static int pci_go_64(struct pci_dev
*pdev
)
4217 if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(64))) {
4218 rc
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(64));
4220 rc
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
4222 dev_printk(KERN_ERR
, &pdev
->dev
,
4223 "64-bit DMA enable failed\n");
4228 rc
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
4230 dev_printk(KERN_ERR
, &pdev
->dev
,
4231 "32-bit DMA enable failed\n");
4234 rc
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
4236 dev_printk(KERN_ERR
, &pdev
->dev
,
4237 "32-bit consistent DMA enable failed\n");
4246 * mv_print_info - Dump key info to kernel log for perusal.
4247 * @host: ATA host to print info about
4249 * FIXME: complete this.
4252 * Inherited from caller.
4254 static void mv_print_info(struct ata_host
*host
)
4256 struct pci_dev
*pdev
= to_pci_dev(host
->dev
);
4257 struct mv_host_priv
*hpriv
= host
->private_data
;
4259 const char *scc_s
, *gen
;
4261 /* Use this to determine the HW stepping of the chip so we know
4262 * what errata to workaround
4264 pci_read_config_byte(pdev
, PCI_CLASS_DEVICE
, &scc
);
4267 else if (scc
== 0x01)
4272 if (IS_GEN_I(hpriv
))
4274 else if (IS_GEN_II(hpriv
))
4276 else if (IS_GEN_IIE(hpriv
))
4281 dev_printk(KERN_INFO
, &pdev
->dev
,
4282 "Gen-%s %u slots %u ports %s mode IRQ via %s\n",
4283 gen
, (unsigned)MV_MAX_Q_DEPTH
, host
->n_ports
,
4284 scc_s
, (MV_HP_FLAG_MSI
& hpriv
->hp_flags
) ? "MSI" : "INTx");
4288 * mv_pci_init_one - handle a positive probe of a PCI Marvell host
4289 * @pdev: PCI device found
4290 * @ent: PCI device ID entry for the matched host
4293 * Inherited from caller.
4295 static int mv_pci_init_one(struct pci_dev
*pdev
,
4296 const struct pci_device_id
*ent
)
4298 static int printed_version
;
4299 unsigned int board_idx
= (unsigned int)ent
->driver_data
;
4300 const struct ata_port_info
*ppi
[] = { &mv_port_info
[board_idx
], NULL
};
4301 struct ata_host
*host
;
4302 struct mv_host_priv
*hpriv
;
4303 int n_ports
, port
, rc
;
4305 if (!printed_version
++)
4306 dev_printk(KERN_INFO
, &pdev
->dev
, "version " DRV_VERSION
"\n");
4309 n_ports
= mv_get_hc_count(ppi
[0]->flags
) * MV_PORTS_PER_HC
;
4311 host
= ata_host_alloc_pinfo(&pdev
->dev
, ppi
, n_ports
);
4312 hpriv
= devm_kzalloc(&pdev
->dev
, sizeof(*hpriv
), GFP_KERNEL
);
4313 if (!host
|| !hpriv
)
4315 host
->private_data
= hpriv
;
4316 hpriv
->n_ports
= n_ports
;
4317 hpriv
->board_idx
= board_idx
;
4319 /* acquire resources */
4320 rc
= pcim_enable_device(pdev
);
4324 rc
= pcim_iomap_regions(pdev
, 1 << MV_PRIMARY_BAR
, DRV_NAME
);
4326 pcim_pin_device(pdev
);
4329 host
->iomap
= pcim_iomap_table(pdev
);
4330 hpriv
->base
= host
->iomap
[MV_PRIMARY_BAR
];
4332 rc
= pci_go_64(pdev
);
4336 rc
= mv_create_dma_pools(hpriv
, &pdev
->dev
);
4340 for (port
= 0; port
< host
->n_ports
; port
++) {
4341 struct ata_port
*ap
= host
->ports
[port
];
4342 void __iomem
*port_mmio
= mv_port_base(hpriv
->base
, port
);
4343 unsigned int offset
= port_mmio
- hpriv
->base
;
4345 ata_port_pbar_desc(ap
, MV_PRIMARY_BAR
, -1, "mmio");
4346 ata_port_pbar_desc(ap
, MV_PRIMARY_BAR
, offset
, "port");
4349 /* initialize adapter */
4350 rc
= mv_init_host(host
);
4354 /* Enable message-switched interrupts, if requested */
4355 if (msi
&& pci_enable_msi(pdev
) == 0)
4356 hpriv
->hp_flags
|= MV_HP_FLAG_MSI
;
4358 mv_dump_pci_cfg(pdev
, 0x68);
4359 mv_print_info(host
);
4361 pci_set_master(pdev
);
4362 pci_try_set_mwi(pdev
);
4363 return ata_host_activate(host
, pdev
->irq
, mv_interrupt
, IRQF_SHARED
,
4364 IS_GEN_I(hpriv
) ? &mv5_sht
: &mv6_sht
);
4368 static int mv_pci_device_resume(struct pci_dev
*pdev
)
4370 struct ata_host
*host
= dev_get_drvdata(&pdev
->dev
);
4373 rc
= ata_pci_device_do_resume(pdev
);
4377 /* initialize adapter */
4378 rc
= mv_init_host(host
);
4382 ata_host_resume(host
);
4389 static int mv_platform_probe(struct platform_device
*pdev
);
4390 static int __devexit
mv_platform_remove(struct platform_device
*pdev
);
4392 static int __init
mv_init(void)
4396 rc
= pci_register_driver(&mv_pci_driver
);
4400 rc
= platform_driver_register(&mv_platform_driver
);
4404 pci_unregister_driver(&mv_pci_driver
);
4409 static void __exit
mv_exit(void)
4412 pci_unregister_driver(&mv_pci_driver
);
4414 platform_driver_unregister(&mv_platform_driver
);
4417 MODULE_AUTHOR("Brett Russ");
4418 MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
4419 MODULE_LICENSE("GPL");
4420 MODULE_DEVICE_TABLE(pci
, mv_pci_tbl
);
4421 MODULE_VERSION(DRV_VERSION
);
4422 MODULE_ALIAS("platform:" DRV_NAME
);
4424 module_init(mv_init
);
4425 module_exit(mv_exit
);