tracing: Add boiler plate for subsystem filter
[linux-2.6.git] / drivers / video / bw2.c
blob7ba74cd4be61afced18e8a94e6ebbc57c83a00b2
1 /* bw2.c: BWTWO frame buffer driver
3 * Copyright (C) 2003, 2006 David S. Miller (davem@davemloft.net)
4 * Copyright (C) 1996,1998 Jakub Jelinek (jj@ultra.linux.cz)
5 * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
6 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
8 * Driver layout based loosely on tgafb.c, see that file for credits.
9 */
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/errno.h>
14 #include <linux/string.h>
15 #include <linux/delay.h>
16 #include <linux/init.h>
17 #include <linux/fb.h>
18 #include <linux/mm.h>
19 #include <linux/of_device.h>
21 #include <asm/io.h>
22 #include <asm/fbio.h>
24 #include "sbuslib.h"
27 * Local functions.
30 static int bw2_blank(int, struct fb_info *);
32 static int bw2_mmap(struct fb_info *, struct vm_area_struct *);
33 static int bw2_ioctl(struct fb_info *, unsigned int, unsigned long);
36 * Frame buffer operations
39 static struct fb_ops bw2_ops = {
40 .owner = THIS_MODULE,
41 .fb_blank = bw2_blank,
42 .fb_fillrect = cfb_fillrect,
43 .fb_copyarea = cfb_copyarea,
44 .fb_imageblit = cfb_imageblit,
45 .fb_mmap = bw2_mmap,
46 .fb_ioctl = bw2_ioctl,
47 #ifdef CONFIG_COMPAT
48 .fb_compat_ioctl = sbusfb_compat_ioctl,
49 #endif
52 /* OBio addresses for the bwtwo registers */
53 #define BWTWO_REGISTER_OFFSET 0x400000
55 struct bt_regs {
56 u32 addr;
57 u32 color_map;
58 u32 control;
59 u32 cursor;
62 struct bw2_regs {
63 struct bt_regs cmap;
64 u8 control;
65 u8 status;
66 u8 cursor_start;
67 u8 cursor_end;
68 u8 h_blank_start;
69 u8 h_blank_end;
70 u8 h_sync_start;
71 u8 h_sync_end;
72 u8 comp_sync_end;
73 u8 v_blank_start_high;
74 u8 v_blank_start_low;
75 u8 v_blank_end;
76 u8 v_sync_start;
77 u8 v_sync_end;
78 u8 xfer_holdoff_start;
79 u8 xfer_holdoff_end;
82 /* Status Register Constants */
83 #define BWTWO_SR_RES_MASK 0x70
84 #define BWTWO_SR_1600_1280 0x50
85 #define BWTWO_SR_1152_900_76_A 0x40
86 #define BWTWO_SR_1152_900_76_B 0x60
87 #define BWTWO_SR_ID_MASK 0x0f
88 #define BWTWO_SR_ID_MONO 0x02
89 #define BWTWO_SR_ID_MONO_ECL 0x03
90 #define BWTWO_SR_ID_MSYNC 0x04
91 #define BWTWO_SR_ID_NOCONN 0x0a
93 /* Control Register Constants */
94 #define BWTWO_CTL_ENABLE_INTS 0x80
95 #define BWTWO_CTL_ENABLE_VIDEO 0x40
96 #define BWTWO_CTL_ENABLE_TIMING 0x20
97 #define BWTWO_CTL_ENABLE_CURCMP 0x10
98 #define BWTWO_CTL_XTAL_MASK 0x0C
99 #define BWTWO_CTL_DIVISOR_MASK 0x03
101 /* Status Register Constants */
102 #define BWTWO_STAT_PENDING_INT 0x80
103 #define BWTWO_STAT_MSENSE_MASK 0x70
104 #define BWTWO_STAT_ID_MASK 0x0f
106 struct bw2_par {
107 spinlock_t lock;
108 struct bw2_regs __iomem *regs;
110 u32 flags;
111 #define BW2_FLAG_BLANKED 0x00000001
113 unsigned long which_io;
117 * bw2_blank - Optional function. Blanks the display.
118 * @blank_mode: the blank mode we want.
119 * @info: frame buffer structure that represents a single frame buffer
121 static int
122 bw2_blank(int blank, struct fb_info *info)
124 struct bw2_par *par = (struct bw2_par *) info->par;
125 struct bw2_regs __iomem *regs = par->regs;
126 unsigned long flags;
127 u8 val;
129 spin_lock_irqsave(&par->lock, flags);
131 switch (blank) {
132 case FB_BLANK_UNBLANK: /* Unblanking */
133 val = sbus_readb(&regs->control);
134 val |= BWTWO_CTL_ENABLE_VIDEO;
135 sbus_writeb(val, &regs->control);
136 par->flags &= ~BW2_FLAG_BLANKED;
137 break;
139 case FB_BLANK_NORMAL: /* Normal blanking */
140 case FB_BLANK_VSYNC_SUSPEND: /* VESA blank (vsync off) */
141 case FB_BLANK_HSYNC_SUSPEND: /* VESA blank (hsync off) */
142 case FB_BLANK_POWERDOWN: /* Poweroff */
143 val = sbus_readb(&regs->control);
144 val &= ~BWTWO_CTL_ENABLE_VIDEO;
145 sbus_writeb(val, &regs->control);
146 par->flags |= BW2_FLAG_BLANKED;
147 break;
150 spin_unlock_irqrestore(&par->lock, flags);
152 return 0;
155 static struct sbus_mmap_map bw2_mmap_map[] = {
157 .size = SBUS_MMAP_FBSIZE(1)
159 { .size = 0 }
162 static int bw2_mmap(struct fb_info *info, struct vm_area_struct *vma)
164 struct bw2_par *par = (struct bw2_par *)info->par;
166 return sbusfb_mmap_helper(bw2_mmap_map,
167 info->fix.smem_start, info->fix.smem_len,
168 par->which_io,
169 vma);
172 static int bw2_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
174 return sbusfb_ioctl_helper(cmd, arg, info,
175 FBTYPE_SUN2BW, 1, info->fix.smem_len);
179 * Initialisation
182 static void __devinit bw2_init_fix(struct fb_info *info, int linebytes)
184 strlcpy(info->fix.id, "bwtwo", sizeof(info->fix.id));
186 info->fix.type = FB_TYPE_PACKED_PIXELS;
187 info->fix.visual = FB_VISUAL_MONO01;
189 info->fix.line_length = linebytes;
191 info->fix.accel = FB_ACCEL_SUN_BWTWO;
194 static u8 bw2regs_1600[] __devinitdata = {
195 0x14, 0x8b, 0x15, 0x28, 0x16, 0x03, 0x17, 0x13,
196 0x18, 0x7b, 0x19, 0x05, 0x1a, 0x34, 0x1b, 0x2e,
197 0x1c, 0x00, 0x1d, 0x0a, 0x1e, 0xff, 0x1f, 0x01,
198 0x10, 0x21, 0
201 static u8 bw2regs_ecl[] __devinitdata = {
202 0x14, 0x65, 0x15, 0x1e, 0x16, 0x04, 0x17, 0x0c,
203 0x18, 0x5e, 0x19, 0x03, 0x1a, 0xa7, 0x1b, 0x23,
204 0x1c, 0x00, 0x1d, 0x08, 0x1e, 0xff, 0x1f, 0x01,
205 0x10, 0x20, 0
208 static u8 bw2regs_analog[] __devinitdata = {
209 0x14, 0xbb, 0x15, 0x2b, 0x16, 0x03, 0x17, 0x13,
210 0x18, 0xb0, 0x19, 0x03, 0x1a, 0xa6, 0x1b, 0x22,
211 0x1c, 0x01, 0x1d, 0x05, 0x1e, 0xff, 0x1f, 0x01,
212 0x10, 0x20, 0
215 static u8 bw2regs_76hz[] __devinitdata = {
216 0x14, 0xb7, 0x15, 0x27, 0x16, 0x03, 0x17, 0x0f,
217 0x18, 0xae, 0x19, 0x03, 0x1a, 0xae, 0x1b, 0x2a,
218 0x1c, 0x01, 0x1d, 0x09, 0x1e, 0xff, 0x1f, 0x01,
219 0x10, 0x24, 0
222 static u8 bw2regs_66hz[] __devinitdata = {
223 0x14, 0xbb, 0x15, 0x2b, 0x16, 0x04, 0x17, 0x14,
224 0x18, 0xae, 0x19, 0x03, 0x1a, 0xa8, 0x1b, 0x24,
225 0x1c, 0x01, 0x1d, 0x05, 0x1e, 0xff, 0x1f, 0x01,
226 0x10, 0x20, 0
229 static int __devinit bw2_do_default_mode(struct bw2_par *par,
230 struct fb_info *info,
231 int *linebytes)
233 u8 status, mon;
234 u8 *p;
236 status = sbus_readb(&par->regs->status);
237 mon = status & BWTWO_SR_RES_MASK;
238 switch (status & BWTWO_SR_ID_MASK) {
239 case BWTWO_SR_ID_MONO_ECL:
240 if (mon == BWTWO_SR_1600_1280) {
241 p = bw2regs_1600;
242 info->var.xres = info->var.xres_virtual = 1600;
243 info->var.yres = info->var.yres_virtual = 1280;
244 *linebytes = 1600 / 8;
245 } else
246 p = bw2regs_ecl;
247 break;
249 case BWTWO_SR_ID_MONO:
250 p = bw2regs_analog;
251 break;
253 case BWTWO_SR_ID_MSYNC:
254 if (mon == BWTWO_SR_1152_900_76_A ||
255 mon == BWTWO_SR_1152_900_76_B)
256 p = bw2regs_76hz;
257 else
258 p = bw2regs_66hz;
259 break;
261 case BWTWO_SR_ID_NOCONN:
262 return 0;
264 default:
265 printk(KERN_ERR "bw2: can't handle SR %02x\n",
266 status);
267 return -EINVAL;
269 for ( ; *p; p += 2) {
270 u8 __iomem *regp = &((u8 __iomem *)par->regs)[p[0]];
271 sbus_writeb(p[1], regp);
273 return 0;
276 static int __devinit bw2_probe(struct platform_device *op)
278 struct device_node *dp = op->dev.of_node;
279 struct fb_info *info;
280 struct bw2_par *par;
281 int linebytes, err;
283 info = framebuffer_alloc(sizeof(struct bw2_par), &op->dev);
285 err = -ENOMEM;
286 if (!info)
287 goto out_err;
288 par = info->par;
290 spin_lock_init(&par->lock);
292 info->fix.smem_start = op->resource[0].start;
293 par->which_io = op->resource[0].flags & IORESOURCE_BITS;
295 sbusfb_fill_var(&info->var, dp, 1);
296 linebytes = of_getintprop_default(dp, "linebytes",
297 info->var.xres);
299 info->var.red.length = info->var.green.length =
300 info->var.blue.length = info->var.bits_per_pixel;
301 info->var.red.offset = info->var.green.offset =
302 info->var.blue.offset = 0;
304 par->regs = of_ioremap(&op->resource[0], BWTWO_REGISTER_OFFSET,
305 sizeof(struct bw2_regs), "bw2 regs");
306 if (!par->regs)
307 goto out_release_fb;
309 if (!of_find_property(dp, "width", NULL)) {
310 err = bw2_do_default_mode(par, info, &linebytes);
311 if (err)
312 goto out_unmap_regs;
315 info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
317 info->flags = FBINFO_DEFAULT;
318 info->fbops = &bw2_ops;
320 info->screen_base = of_ioremap(&op->resource[0], 0,
321 info->fix.smem_len, "bw2 ram");
322 if (!info->screen_base)
323 goto out_unmap_regs;
325 bw2_blank(FB_BLANK_UNBLANK, info);
327 bw2_init_fix(info, linebytes);
329 err = register_framebuffer(info);
330 if (err < 0)
331 goto out_unmap_screen;
333 dev_set_drvdata(&op->dev, info);
335 printk(KERN_INFO "%s: bwtwo at %lx:%lx\n",
336 dp->full_name, par->which_io, info->fix.smem_start);
338 return 0;
340 out_unmap_screen:
341 of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
343 out_unmap_regs:
344 of_iounmap(&op->resource[0], par->regs, sizeof(struct bw2_regs));
346 out_release_fb:
347 framebuffer_release(info);
349 out_err:
350 return err;
353 static int __devexit bw2_remove(struct platform_device *op)
355 struct fb_info *info = dev_get_drvdata(&op->dev);
356 struct bw2_par *par = info->par;
358 unregister_framebuffer(info);
360 of_iounmap(&op->resource[0], par->regs, sizeof(struct bw2_regs));
361 of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
363 framebuffer_release(info);
365 dev_set_drvdata(&op->dev, NULL);
367 return 0;
370 static const struct of_device_id bw2_match[] = {
372 .name = "bwtwo",
376 MODULE_DEVICE_TABLE(of, bw2_match);
378 static struct platform_driver bw2_driver = {
379 .driver = {
380 .name = "bw2",
381 .owner = THIS_MODULE,
382 .of_match_table = bw2_match,
384 .probe = bw2_probe,
385 .remove = __devexit_p(bw2_remove),
388 static int __init bw2_init(void)
390 if (fb_get_options("bw2fb", NULL))
391 return -ENODEV;
393 return platform_driver_register(&bw2_driver);
396 static void __exit bw2_exit(void)
398 platform_driver_unregister(&bw2_driver);
401 module_init(bw2_init);
402 module_exit(bw2_exit);
404 MODULE_DESCRIPTION("framebuffer driver for BWTWO chipsets");
405 MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
406 MODULE_VERSION("2.0");
407 MODULE_LICENSE("GPL");