blackfin: cplb-mpu: fix page mask table overflow
[linux-2.6.git] / arch / x86 / kernel / quirks.c
blob03920a15a632289605c6f0ba0b563d64065214a7
1 /*
2 * This file contains work-arounds for x86 and x86_64 platform bugs.
3 */
4 #include <linux/pci.h>
5 #include <linux/irq.h>
7 #include <asm/hpet.h>
9 #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
11 static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
13 u8 config;
14 u16 word;
16 /* BIOS may enable hardware IRQ balancing for
17 * E7520/E7320/E7525(revision ID 0x9 and below)
18 * based platforms.
19 * Disable SW irqbalance/affinity on those platforms.
21 if (dev->revision > 0x9)
22 return;
24 /* enable access to config space*/
25 pci_read_config_byte(dev, 0xf4, &config);
26 pci_write_config_byte(dev, 0xf4, config|0x2);
29 * read xTPR register. We may not have a pci_dev for device 8
30 * because it might be hidden until the above write.
32 pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word);
34 if (!(word & (1 << 13))) {
35 dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
36 "disabling irq balancing and affinity\n");
37 noirqdebug_setup("");
38 #ifdef CONFIG_PROC_FS
39 no_irq_affinity = 1;
40 #endif
43 /* put back the original value for config space*/
44 if (!(config & 0x2))
45 pci_write_config_byte(dev, 0xf4, config);
47 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH,
48 quirk_intel_irqbalance);
49 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH,
50 quirk_intel_irqbalance);
51 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH,
52 quirk_intel_irqbalance);
53 #endif
55 #if defined(CONFIG_HPET_TIMER)
56 unsigned long force_hpet_address;
58 static enum {
59 NONE_FORCE_HPET_RESUME,
60 OLD_ICH_FORCE_HPET_RESUME,
61 ICH_FORCE_HPET_RESUME,
62 VT8237_FORCE_HPET_RESUME,
63 NVIDIA_FORCE_HPET_RESUME,
64 ATI_FORCE_HPET_RESUME,
65 } force_hpet_resume_type;
67 static void __iomem *rcba_base;
69 static void ich_force_hpet_resume(void)
71 u32 val;
73 if (!force_hpet_address)
74 return;
76 BUG_ON(rcba_base == NULL);
78 /* read the Function Disable register, dword mode only */
79 val = readl(rcba_base + 0x3404);
80 if (!(val & 0x80)) {
81 /* HPET disabled in HPTC. Trying to enable */
82 writel(val | 0x80, rcba_base + 0x3404);
85 val = readl(rcba_base + 0x3404);
86 if (!(val & 0x80))
87 BUG();
88 else
89 printk(KERN_DEBUG "Force enabled HPET at resume\n");
91 return;
94 static void ich_force_enable_hpet(struct pci_dev *dev)
96 u32 val;
97 u32 uninitialized_var(rcba);
98 int err = 0;
100 if (hpet_address || force_hpet_address)
101 return;
103 pci_read_config_dword(dev, 0xF0, &rcba);
104 rcba &= 0xFFFFC000;
105 if (rcba == 0) {
106 dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
107 "cannot force enable HPET\n");
108 return;
111 /* use bits 31:14, 16 kB aligned */
112 rcba_base = ioremap_nocache(rcba, 0x4000);
113 if (rcba_base == NULL) {
114 dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
115 "cannot force enable HPET\n");
116 return;
119 /* read the Function Disable register, dword mode only */
120 val = readl(rcba_base + 0x3404);
122 if (val & 0x80) {
123 /* HPET is enabled in HPTC. Just not reported by BIOS */
124 val = val & 0x3;
125 force_hpet_address = 0xFED00000 | (val << 12);
126 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
127 "0x%lx\n", force_hpet_address);
128 iounmap(rcba_base);
129 return;
132 /* HPET disabled in HPTC. Trying to enable */
133 writel(val | 0x80, rcba_base + 0x3404);
135 val = readl(rcba_base + 0x3404);
136 if (!(val & 0x80)) {
137 err = 1;
138 } else {
139 val = val & 0x3;
140 force_hpet_address = 0xFED00000 | (val << 12);
143 if (err) {
144 force_hpet_address = 0;
145 iounmap(rcba_base);
146 dev_printk(KERN_DEBUG, &dev->dev,
147 "Failed to force enable HPET\n");
148 } else {
149 force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
150 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
151 "0x%lx\n", force_hpet_address);
155 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
156 ich_force_enable_hpet);
157 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
158 ich_force_enable_hpet);
159 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
160 ich_force_enable_hpet);
161 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
162 ich_force_enable_hpet);
163 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
164 ich_force_enable_hpet);
165 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
166 ich_force_enable_hpet);
167 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
168 ich_force_enable_hpet);
169 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
170 ich_force_enable_hpet);
171 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
172 ich_force_enable_hpet);
173 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16, /* ICH10 */
174 ich_force_enable_hpet);
176 static struct pci_dev *cached_dev;
178 static void hpet_print_force_info(void)
180 printk(KERN_INFO "HPET not enabled in BIOS. "
181 "You might try hpet=force boot option\n");
184 static void old_ich_force_hpet_resume(void)
186 u32 val;
187 u32 uninitialized_var(gen_cntl);
189 if (!force_hpet_address || !cached_dev)
190 return;
192 pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
193 gen_cntl &= (~(0x7 << 15));
194 gen_cntl |= (0x4 << 15);
196 pci_write_config_dword(cached_dev, 0xD0, gen_cntl);
197 pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
198 val = gen_cntl >> 15;
199 val &= 0x7;
200 if (val == 0x4)
201 printk(KERN_DEBUG "Force enabled HPET at resume\n");
202 else
203 BUG();
206 static void old_ich_force_enable_hpet(struct pci_dev *dev)
208 u32 val;
209 u32 uninitialized_var(gen_cntl);
211 if (hpet_address || force_hpet_address)
212 return;
214 pci_read_config_dword(dev, 0xD0, &gen_cntl);
216 * Bit 17 is HPET enable bit.
217 * Bit 16:15 control the HPET base address.
219 val = gen_cntl >> 15;
220 val &= 0x7;
221 if (val & 0x4) {
222 val &= 0x3;
223 force_hpet_address = 0xFED00000 | (val << 12);
224 dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
225 force_hpet_address);
226 return;
230 * HPET is disabled. Trying enabling at FED00000 and check
231 * whether it sticks
233 gen_cntl &= (~(0x7 << 15));
234 gen_cntl |= (0x4 << 15);
235 pci_write_config_dword(dev, 0xD0, gen_cntl);
237 pci_read_config_dword(dev, 0xD0, &gen_cntl);
239 val = gen_cntl >> 15;
240 val &= 0x7;
241 if (val & 0x4) {
242 /* HPET is enabled in HPTC. Just not reported by BIOS */
243 val &= 0x3;
244 force_hpet_address = 0xFED00000 | (val << 12);
245 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
246 "0x%lx\n", force_hpet_address);
247 cached_dev = dev;
248 force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
249 return;
252 dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
256 * Undocumented chipset features. Make sure that the user enforced
257 * this.
259 static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
261 if (hpet_force_user)
262 old_ich_force_enable_hpet(dev);
265 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
266 old_ich_force_enable_hpet_user);
267 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
268 old_ich_force_enable_hpet_user);
269 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,
270 old_ich_force_enable_hpet_user);
271 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
272 old_ich_force_enable_hpet_user);
273 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,
274 old_ich_force_enable_hpet_user);
275 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
276 old_ich_force_enable_hpet);
277 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12,
278 old_ich_force_enable_hpet);
281 static void vt8237_force_hpet_resume(void)
283 u32 val;
285 if (!force_hpet_address || !cached_dev)
286 return;
288 val = 0xfed00000 | 0x80;
289 pci_write_config_dword(cached_dev, 0x68, val);
291 pci_read_config_dword(cached_dev, 0x68, &val);
292 if (val & 0x80)
293 printk(KERN_DEBUG "Force enabled HPET at resume\n");
294 else
295 BUG();
298 static void vt8237_force_enable_hpet(struct pci_dev *dev)
300 u32 uninitialized_var(val);
302 if (hpet_address || force_hpet_address)
303 return;
305 if (!hpet_force_user) {
306 hpet_print_force_info();
307 return;
310 pci_read_config_dword(dev, 0x68, &val);
312 * Bit 7 is HPET enable bit.
313 * Bit 31:10 is HPET base address (contrary to what datasheet claims)
315 if (val & 0x80) {
316 force_hpet_address = (val & ~0x3ff);
317 dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
318 force_hpet_address);
319 return;
323 * HPET is disabled. Trying enabling at FED00000 and check
324 * whether it sticks
326 val = 0xfed00000 | 0x80;
327 pci_write_config_dword(dev, 0x68, val);
329 pci_read_config_dword(dev, 0x68, &val);
330 if (val & 0x80) {
331 force_hpet_address = (val & ~0x3ff);
332 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
333 "0x%lx\n", force_hpet_address);
334 cached_dev = dev;
335 force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
336 return;
339 dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
342 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
343 vt8237_force_enable_hpet);
344 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
345 vt8237_force_enable_hpet);
346 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700,
347 vt8237_force_enable_hpet);
349 static void ati_force_hpet_resume(void)
351 pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
352 printk(KERN_DEBUG "Force enabled HPET at resume\n");
355 static u32 ati_ixp4x0_rev(struct pci_dev *dev)
357 u32 d;
358 u8 b;
360 pci_read_config_byte(dev, 0xac, &b);
361 b &= ~(1<<5);
362 pci_write_config_byte(dev, 0xac, b);
363 pci_read_config_dword(dev, 0x70, &d);
364 d |= 1<<8;
365 pci_write_config_dword(dev, 0x70, d);
366 pci_read_config_dword(dev, 0x8, &d);
367 d &= 0xff;
368 dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d);
369 return d;
372 static void ati_force_enable_hpet(struct pci_dev *dev)
374 u32 d, val;
375 u8 b;
377 if (hpet_address || force_hpet_address)
378 return;
380 if (!hpet_force_user) {
381 hpet_print_force_info();
382 return;
385 d = ati_ixp4x0_rev(dev);
386 if (d < 0x82)
387 return;
389 /* base address */
390 pci_write_config_dword(dev, 0x14, 0xfed00000);
391 pci_read_config_dword(dev, 0x14, &val);
393 /* enable interrupt */
394 outb(0x72, 0xcd6); b = inb(0xcd7);
395 b |= 0x1;
396 outb(0x72, 0xcd6); outb(b, 0xcd7);
397 outb(0x72, 0xcd6); b = inb(0xcd7);
398 if (!(b & 0x1))
399 return;
400 pci_read_config_dword(dev, 0x64, &d);
401 d |= (1<<10);
402 pci_write_config_dword(dev, 0x64, d);
403 pci_read_config_dword(dev, 0x64, &d);
404 if (!(d & (1<<10)))
405 return;
407 force_hpet_address = val;
408 force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
409 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
410 force_hpet_address);
411 cached_dev = dev;
413 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
414 ati_force_enable_hpet);
417 * Undocumented chipset feature taken from LinuxBIOS.
419 static void nvidia_force_hpet_resume(void)
421 pci_write_config_dword(cached_dev, 0x44, 0xfed00001);
422 printk(KERN_DEBUG "Force enabled HPET at resume\n");
425 static void nvidia_force_enable_hpet(struct pci_dev *dev)
427 u32 uninitialized_var(val);
429 if (hpet_address || force_hpet_address)
430 return;
432 if (!hpet_force_user) {
433 hpet_print_force_info();
434 return;
437 pci_write_config_dword(dev, 0x44, 0xfed00001);
438 pci_read_config_dword(dev, 0x44, &val);
439 force_hpet_address = val & 0xfffffffe;
440 force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
441 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
442 force_hpet_address);
443 cached_dev = dev;
444 return;
447 /* ISA Bridges */
448 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050,
449 nvidia_force_enable_hpet);
450 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051,
451 nvidia_force_enable_hpet);
453 /* LPC bridges */
454 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
455 nvidia_force_enable_hpet);
456 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
457 nvidia_force_enable_hpet);
458 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
459 nvidia_force_enable_hpet);
460 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362,
461 nvidia_force_enable_hpet);
462 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363,
463 nvidia_force_enable_hpet);
464 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364,
465 nvidia_force_enable_hpet);
466 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365,
467 nvidia_force_enable_hpet);
468 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366,
469 nvidia_force_enable_hpet);
470 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367,
471 nvidia_force_enable_hpet);
473 void force_hpet_resume(void)
475 switch (force_hpet_resume_type) {
476 case ICH_FORCE_HPET_RESUME:
477 ich_force_hpet_resume();
478 return;
479 case OLD_ICH_FORCE_HPET_RESUME:
480 old_ich_force_hpet_resume();
481 return;
482 case VT8237_FORCE_HPET_RESUME:
483 vt8237_force_hpet_resume();
484 return;
485 case NVIDIA_FORCE_HPET_RESUME:
486 nvidia_force_hpet_resume();
487 return;
488 case ATI_FORCE_HPET_RESUME:
489 ati_force_hpet_resume();
490 return;
491 default:
492 break;
497 * HPET MSI on some boards (ATI SB700/SB800) has side effect on
498 * floppy DMA. Disable HPET MSI on such platforms.
499 * See erratum #27 (Misinterpreted MSI Requests May Result in
500 * Corrupted LPC DMA Data) in AMD Publication #46837,
501 * "SB700 Family Product Errata", Rev. 1.0, March 2010.
503 static void force_disable_hpet_msi(struct pci_dev *unused)
505 hpet_msi_disable = 1;
508 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
509 force_disable_hpet_msi);
511 #endif
513 #if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
514 /* Set correct numa_node information for AMD NB functions */
515 static void __init quirk_amd_nb_node(struct pci_dev *dev)
517 struct pci_dev *nb_ht;
518 unsigned int devfn;
519 u32 node;
520 u32 val;
522 devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
523 nb_ht = pci_get_slot(dev->bus, devfn);
524 if (!nb_ht)
525 return;
527 pci_read_config_dword(nb_ht, 0x60, &val);
528 node = val & 7;
530 * Some hardware may return an invalid node ID,
531 * so check it first:
533 if (node_online(node))
534 set_dev_node(&dev->dev, node);
535 pci_dev_put(nb_ht);
538 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
539 quirk_amd_nb_node);
540 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
541 quirk_amd_nb_node);
542 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
543 quirk_amd_nb_node);
544 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC,
545 quirk_amd_nb_node);
546 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_HT,
547 quirk_amd_nb_node);
548 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MAP,
549 quirk_amd_nb_node);
550 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM,
551 quirk_amd_nb_node);
552 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
553 quirk_amd_nb_node);
554 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
555 quirk_amd_nb_node);
556 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0,
557 quirk_amd_nb_node);
558 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1,
559 quirk_amd_nb_node);
560 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2,
561 quirk_amd_nb_node);
562 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3,
563 quirk_amd_nb_node);
564 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4,
565 quirk_amd_nb_node);
566 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5,
567 quirk_amd_nb_node);
569 #endif