drivers/net/wireless/libertas/host.h

   1 /**
   2   * This file function prototypes, data structure
   3   * and  definitions for all the host/station commands
   4   */
   5
   6 #ifndef _LBS_HOST_H_
   7 #define _LBS_HOST_H_
   8
   9 #include "types.h"
  10 #include "defs.h"
  11
  12 #define DEFAULT_AD_HOC_CHANNEL                  6
  13
  14 #define CMD_OPTION_WAITFORRSP                   0x0002
  15
  16 /** Host command IDs */
  17
  18 /* Return command are almost always the same as the host command, but with
  19  * bit 15 set high.  There are a few exceptions, though...
  20  */
  21 #define CMD_RET(cmd)                            (0x8000 | cmd)
  22
  23 /* Return command convention exceptions: */
  24 #define CMD_RET_802_11_ASSOCIATE                0x8012
  25
  26 /* Command codes */
  27 #define CMD_GET_HW_SPEC                         0x0003
  28 #define CMD_EEPROM_UPDATE                       0x0004
  29 #define CMD_802_11_RESET                        0x0005
  30 #define CMD_802_11_SCAN                         0x0006
  31 #define CMD_802_11_GET_LOG                      0x000b
  32 #define CMD_MAC_MULTICAST_ADR                   0x0010
  33 #define CMD_802_11_AUTHENTICATE                 0x0011
  34 #define CMD_802_11_EEPROM_ACCESS                0x0059
  35 #define CMD_802_11_ASSOCIATE                    0x0050
  36 #define CMD_802_11_SET_WEP                      0x0013
  37 #define CMD_802_11_GET_STAT                     0x0014
  38 #define CMD_802_3_GET_STAT                      0x0015
  39 #define CMD_802_11_SNMP_MIB                     0x0016
  40 #define CMD_MAC_REG_MAP                         0x0017
  41 #define CMD_BBP_REG_MAP                         0x0018
  42 #define CMD_MAC_REG_ACCESS                      0x0019
  43 #define CMD_BBP_REG_ACCESS                      0x001a
  44 #define CMD_RF_REG_ACCESS                       0x001b
  45 #define CMD_802_11_RADIO_CONTROL                0x001c
  46 #define CMD_802_11_RF_CHANNEL                   0x001d
  47 #define CMD_802_11_RF_TX_POWER                  0x001e
  48 #define CMD_802_11_RSSI                         0x001f
  49 #define CMD_802_11_RF_ANTENNA                   0x0020
  50 #define CMD_802_11_PS_MODE                      0x0021
  51 #define CMD_802_11_DATA_RATE                    0x0022
  52 #define CMD_RF_REG_MAP                          0x0023
  53 #define CMD_802_11_DEAUTHENTICATE               0x0024
  54 #define CMD_802_11_REASSOCIATE                  0x0025
  55 #define CMD_MAC_CONTROL                         0x0028
  56 #define CMD_802_11_AD_HOC_START                 0x002b
  57 #define CMD_802_11_AD_HOC_JOIN                  0x002c
  58 #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
  59 #define CMD_802_11_ENABLE_RSN                   0x002f
  60 #define CMD_802_11_SET_AFC                      0x003c
  61 #define CMD_802_11_GET_AFC                      0x003d
  62 #define CMD_802_11_DEEP_SLEEP                   0x003e
  63 #define CMD_802_11_AD_HOC_STOP                  0x0040
  64 #define CMD_802_11_HOST_SLEEP_CFG               0x0043
  65 #define CMD_802_11_WAKEUP_CONFIRM               0x0044
  66 #define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
  67 #define CMD_802_11_BEACON_STOP                  0x0049
  68 #define CMD_802_11_MAC_ADDRESS                  0x004d
  69 #define CMD_802_11_LED_GPIO_CTRL                0x004e
  70 #define CMD_802_11_EEPROM_ACCESS                0x0059
  71 #define CMD_802_11_BAND_CONFIG                  0x0058
  72 #define CMD_GSPI_BUS_CONFIG                     0x005a
  73 #define CMD_802_11D_DOMAIN_INFO                 0x005b
  74 #define CMD_802_11_KEY_MATERIAL                 0x005e
  75 #define CMD_802_11_SLEEP_PARAMS                 0x0066
  76 #define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
  77 #define CMD_802_11_SLEEP_PERIOD                 0x0068
  78 #define CMD_802_11_TPC_CFG                      0x0072
  79 #define CMD_802_11_PA_CFG                       0x0073
  80 #define CMD_802_11_FW_WAKE_METHOD               0x0074
  81 #define CMD_802_11_SUBSCRIBE_EVENT              0x0075
  82 #define CMD_802_11_RATE_ADAPT_RATESET           0x0076
  83 #define CMD_802_11_TX_RATE_QUERY                0x007f
  84 #define CMD_GET_TSF                             0x0080
  85 #define CMD_BT_ACCESS                           0x0087
  86 #define CMD_FWT_ACCESS                          0x0095
  87 #define CMD_802_11_MONITOR_MODE                 0x0098
  88 #define CMD_MESH_ACCESS                         0x009b
  89 #define CMD_MESH_CONFIG_OLD                     0x00a3
  90 #define CMD_MESH_CONFIG                         0x00ac
  91 #define CMD_SET_BOOT2_VER                       0x00a5
  92 #define CMD_FUNC_INIT                           0x00a9
  93 #define CMD_FUNC_SHUTDOWN                       0x00aa
  94 #define CMD_802_11_BEACON_CTRL                  0x00b0
  95
  96 /* For the IEEE Power Save */
  97 #define PS_MODE_ACTION_ENTER_PS                 0x0030
  98 #define PS_MODE_ACTION_EXIT_PS                  0x0031
  99 #define PS_MODE_ACTION_SLEEP_CONFIRMED          0x0034
 100
 101 #define CMD_ENABLE_RSN                          0x0001
 102 #define CMD_DISABLE_RSN                         0x0000
 103
 104 #define CMD_ACT_GET                             0x0000
 105 #define CMD_ACT_SET                             0x0001
 106
 107 /* Define action or option for CMD_802_11_SET_WEP */
 108 #define CMD_ACT_ADD                             0x0002
 109 #define CMD_ACT_REMOVE                          0x0004
 110
 111 #define CMD_TYPE_WEP_40_BIT                     0x01
 112 #define CMD_TYPE_WEP_104_BIT                    0x02
 113
 114 #define CMD_NUM_OF_WEP_KEYS                     4
 115
 116 #define CMD_WEP_KEY_INDEX_MASK                  0x3fff
 117
 118 /* Define action or option for CMD_802_11_SCAN */
 119 #define CMD_BSS_TYPE_BSS                        0x0001
 120 #define CMD_BSS_TYPE_IBSS                       0x0002
 121 #define CMD_BSS_TYPE_ANY                        0x0003
 122
 123 /* Define action or option for CMD_802_11_SCAN */
 124 #define CMD_SCAN_TYPE_ACTIVE                    0x0000
 125 #define CMD_SCAN_TYPE_PASSIVE                   0x0001
 126
 127 #define CMD_SCAN_RADIO_TYPE_BG                  0
 128
 129 #define CMD_SCAN_PROBE_DELAY_TIME               0
 130
 131 /* Define action or option for CMD_MAC_CONTROL */
 132 #define CMD_ACT_MAC_RX_ON                       0x0001
 133 #define CMD_ACT_MAC_TX_ON                       0x0002
 134 #define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
 135 #define CMD_ACT_MAC_WEP_ENABLE                  0x0008
 136 #define CMD_ACT_MAC_INT_ENABLE                  0x0010
 137 #define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
 138 #define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
 139 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
 140 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
 141 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
 142
 143 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
 144 #define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
 145 #define CMD_SUBSCRIBE_SNR_LOW                   0x0002
 146 #define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
 147 #define CMD_SUBSCRIBE_BCNMISS                   0x0008
 148 #define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
 149 #define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
 150
 151 #define RADIO_PREAMBLE_LONG                     0x00
 152 #define RADIO_PREAMBLE_SHORT                    0x02
 153 #define RADIO_PREAMBLE_AUTO                     0x04
 154
 155 /* Define action or option for CMD_802_11_RF_CHANNEL */
 156 #define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
 157 #define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
 158
 159 /* Define action or option for CMD_802_11_DATA_RATE */
 160 #define CMD_ACT_SET_TX_AUTO                     0x0000
 161 #define CMD_ACT_SET_TX_FIX_RATE                 0x0001
 162 #define CMD_ACT_GET_TX_RATE                     0x0002
 163
 164 /* Options for CMD_802_11_FW_WAKE_METHOD */
 165 #define CMD_WAKE_METHOD_UNCHANGED               0x0000
 166 #define CMD_WAKE_METHOD_COMMAND_INT             0x0001
 167 #define CMD_WAKE_METHOD_GPIO                    0x0002
 168
 169 /* Object IDs for CMD_802_11_SNMP_MIB */
 170 #define SNMP_MIB_OID_BSS_TYPE                   0x0000
 171 #define SNMP_MIB_OID_OP_RATE_SET                0x0001
 172 #define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
 173 #define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
 174 #define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
 175 #define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
 176 #define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
 177 #define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
 178 #define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
 179 #define SNMP_MIB_OID_11D_ENABLE                 0x0009
 180 #define SNMP_MIB_OID_11H_ENABLE                 0x000A
 181
 182 /* Define action or option for CMD_BT_ACCESS */
 183 enum cmd_bt_access_opts {
 184         /* The bt commands start at 5 instead of 1 because the old dft commands
 185          * are mapped to 1-4.  These old commands are no longer maintained and
 186          * should not be called.
 187          */
 188         CMD_ACT_BT_ACCESS_ADD = 5,
 189         CMD_ACT_BT_ACCESS_DEL,
 190         CMD_ACT_BT_ACCESS_LIST,
 191         CMD_ACT_BT_ACCESS_RESET,
 192         CMD_ACT_BT_ACCESS_SET_INVERT,
 193         CMD_ACT_BT_ACCESS_GET_INVERT
 194 };
 195
 196 /* Define action or option for CMD_FWT_ACCESS */
 197 enum cmd_fwt_access_opts {
 198         CMD_ACT_FWT_ACCESS_ADD = 1,
 199         CMD_ACT_FWT_ACCESS_DEL,
 200         CMD_ACT_FWT_ACCESS_LOOKUP,
 201         CMD_ACT_FWT_ACCESS_LIST,
 202         CMD_ACT_FWT_ACCESS_LIST_ROUTE,
 203         CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
 204         CMD_ACT_FWT_ACCESS_RESET,
 205         CMD_ACT_FWT_ACCESS_CLEANUP,
 206         CMD_ACT_FWT_ACCESS_TIME,
 207 };
 208
 209 /* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
 210 enum cmd_wol_cfg_opts {
 211         CMD_ACT_ACTION_NONE = 0,
 212         CMD_ACT_SET_WOL_RULE,
 213         CMD_ACT_GET_WOL_RULE,
 214         CMD_ACT_RESET_WOL_RULE,
 215 };
 216
 217 /* Define action or option for CMD_MESH_ACCESS */
 218 enum cmd_mesh_access_opts {
 219         CMD_ACT_MESH_GET_TTL = 1,
 220         CMD_ACT_MESH_SET_TTL,
 221         CMD_ACT_MESH_GET_STATS,
 222         CMD_ACT_MESH_GET_ANYCAST,
 223         CMD_ACT_MESH_SET_ANYCAST,
 224         CMD_ACT_MESH_SET_LINK_COSTS,
 225         CMD_ACT_MESH_GET_LINK_COSTS,
 226         CMD_ACT_MESH_SET_BCAST_RATE,
 227         CMD_ACT_MESH_GET_BCAST_RATE,
 228         CMD_ACT_MESH_SET_RREQ_DELAY,
 229         CMD_ACT_MESH_GET_RREQ_DELAY,
 230         CMD_ACT_MESH_SET_ROUTE_EXP,
 231         CMD_ACT_MESH_GET_ROUTE_EXP,
 232         CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
 233         CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
 234         CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
 235 };
 236
 237 /* Define actions and types for CMD_MESH_CONFIG */
 238 enum cmd_mesh_config_actions {
 239         CMD_ACT_MESH_CONFIG_STOP = 0,
 240         CMD_ACT_MESH_CONFIG_START,
 241         CMD_ACT_MESH_CONFIG_SET,
 242         CMD_ACT_MESH_CONFIG_GET,
 243 };
 244
 245 enum cmd_mesh_config_types {
 246         CMD_TYPE_MESH_SET_BOOTFLAG = 1,
 247         CMD_TYPE_MESH_SET_BOOTTIME,
 248         CMD_TYPE_MESH_SET_DEF_CHANNEL,
 249         CMD_TYPE_MESH_SET_MESH_IE,
 250         CMD_TYPE_MESH_GET_DEFAULTS,
 251         CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
 252 };
 253
 254 /** Card Event definition */
 255 #define MACREG_INT_CODE_TX_PPA_FREE             0
 256 #define MACREG_INT_CODE_TX_DMA_DONE             1
 257 #define MACREG_INT_CODE_LINK_LOST_W_SCAN        2
 258 #define MACREG_INT_CODE_LINK_LOST_NO_SCAN       3
 259 #define MACREG_INT_CODE_LINK_SENSED             4
 260 #define MACREG_INT_CODE_CMD_FINISHED            5
 261 #define MACREG_INT_CODE_MIB_CHANGED             6
 262 #define MACREG_INT_CODE_INIT_DONE               7
 263 #define MACREG_INT_CODE_DEAUTHENTICATED         8
 264 #define MACREG_INT_CODE_DISASSOCIATED           9
 265 #define MACREG_INT_CODE_PS_AWAKE                10
 266 #define MACREG_INT_CODE_PS_SLEEP                11
 267 #define MACREG_INT_CODE_MIC_ERR_MULTICAST       13
 268 #define MACREG_INT_CODE_MIC_ERR_UNICAST         14
 269 #define MACREG_INT_CODE_WM_AWAKE                15
 270 #define MACREG_INT_CODE_DEEP_SLEEP_AWAKE        16
 271 #define MACREG_INT_CODE_ADHOC_BCN_LOST          17
 272 #define MACREG_INT_CODE_HOST_AWAKE              18
 273 #define MACREG_INT_CODE_STOP_TX                 19
 274 #define MACREG_INT_CODE_START_TX                20
 275 #define MACREG_INT_CODE_CHANNEL_SWITCH          21
 276 #define MACREG_INT_CODE_MEASUREMENT_RDY         22
 277 #define MACREG_INT_CODE_WMM_CHANGE              23
 278 #define MACREG_INT_CODE_BG_SCAN_REPORT          24
 279 #define MACREG_INT_CODE_RSSI_LOW                25
 280 #define MACREG_INT_CODE_SNR_LOW                 26
 281 #define MACREG_INT_CODE_MAX_FAIL                27
 282 #define MACREG_INT_CODE_RSSI_HIGH               28
 283 #define MACREG_INT_CODE_SNR_HIGH                29
 284 #define MACREG_INT_CODE_MESH_AUTO_STARTED       35
 285 #define MACREG_INT_CODE_FIRMWARE_READY          48
 286
 287
 288 /* 802.11-related definitions */
 289
 290 /* TxPD descriptor */
 291 struct txpd {
 292         /* union to cope up with later FW revisions */
 293         union {
 294                 /* Current Tx packet status */
 295                 __le32 tx_status;
 296                 struct {
 297                         /* BSS type: client, AP, etc. */
 298                         u8 bss_type;
 299                         /* BSS number */
 300                         u8 bss_num;
 301                         /* Reserved */
 302                         __le16 reserved;
 303                 } bss;
 304         } u;
 305         /* Tx control */
 306         __le32 tx_control;
 307         __le32 tx_packet_location;
 308         /* Tx packet length */
 309         __le16 tx_packet_length;
 310         /* First 2 byte of destination MAC address */
 311         u8 tx_dest_addr_high[2];
 312         /* Last 4 byte of destination MAC address */
 313         u8 tx_dest_addr_low[4];
 314         /* Pkt Priority */
 315         u8 priority;
 316         /* Pkt Trasnit Power control */
 317         u8 powermgmt;
 318         /* Amount of time the packet has been queued (units = 2ms) */
 319         u8 pktdelay_2ms;
 320         /* reserved */
 321         u8 reserved1;
 322 } __packed;
 323
 324 /* RxPD Descriptor */
 325 struct rxpd {
 326         /* union to cope up with later FW revisions */
 327         union {
 328                 /* Current Rx packet status */
 329                 __le16 status;
 330                 struct {
 331                         /* BSS type: client, AP, etc. */
 332                         u8 bss_type;
 333                         /* BSS number */
 334                         u8 bss_num;
 335                 } __packed bss;
 336         } __packed u;
 337
 338         /* SNR */
 339         u8 snr;
 340
 341         /* Tx control */
 342         u8 rx_control;
 343
 344         /* Pkt length */
 345         __le16 pkt_len;
 346
 347         /* Noise Floor */
 348         u8 nf;
 349
 350         /* Rx Packet Rate */
 351         u8 rx_rate;
 352
 353         /* Pkt addr */
 354         __le32 pkt_ptr;
 355
 356         /* Next Rx RxPD addr */
 357         __le32 next_rxpd_ptr;
 358
 359         /* Pkt Priority */
 360         u8 priority;
 361         u8 reserved[3];
 362 } __packed;
 363
 364 struct cmd_header {
 365         __le16 command;
 366         __le16 size;
 367         __le16 seqnum;
 368         __le16 result;
 369 } __packed;
 370
 371 /* Generic structure to hold all key types. */
 372 struct enc_key {
 373         u16 len;
 374         u16 flags;  /* KEY_INFO_* from defs.h */
 375         u16 type; /* KEY_TYPE_* from defs.h */
 376         u8 key[32];
 377 };
 378
 379 /* lbs_offset_value */
 380 struct lbs_offset_value {
 381         u32 offset;
 382         u32 value;
 383 } __packed;
 384
 385 #define MAX_11D_TRIPLETS        83
 386
 387 struct mrvl_ie_domain_param_set {
 388         struct mrvl_ie_header header;
 389
 390         u8 country_code[3];
 391         struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
 392 } __packed;
 393
 394 struct cmd_ds_802_11d_domain_info {
 395         struct cmd_header hdr;
 396
 397         __le16 action;
 398         struct mrvl_ie_domain_param_set domain;
 399 } __packed;
 400
 401 /*
 402  * Define data structure for CMD_GET_HW_SPEC
 403  * This structure defines the response for the GET_HW_SPEC command
 404  */
 405 struct cmd_ds_get_hw_spec {
 406         struct cmd_header hdr;
 407
 408         /* HW Interface version number */
 409         __le16 hwifversion;
 410         /* HW version number */
 411         __le16 version;
 412         /* Max number of TxPD FW can handle */
 413         __le16 nr_txpd;
 414         /* Max no of Multicast address */
 415         __le16 nr_mcast_adr;
 416         /* MAC address */
 417         u8 permanentaddr[6];
 418
 419         /* region Code */
 420         __le16 regioncode;
 421
 422         /* Number of antenna used */
 423         __le16 nr_antenna;
 424
 425         /* FW release number, example 0x01030304 = 2.3.4p1 */
 426         __le32 fwrelease;
 427
 428         /* Base Address of TxPD queue */
 429         __le32 wcb_base;
 430         /* Read Pointer of RxPd queue */
 431         __le32 rxpd_rdptr;
 432
 433         /* Write Pointer of RxPd queue */
 434         __le32 rxpd_wrptr;
 435
 436         /*FW/HW capability */
 437         __le32 fwcapinfo;
 438 } __packed;
 439
 440 struct cmd_ds_802_11_subscribe_event {
 441         struct cmd_header hdr;
 442
 443         __le16 action;
 444         __le16 events;
 445
 446         /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
 447          * number of TLVs. From the v5.1 manual, those TLVs would add up to
 448          * 40 bytes. However, future firmware might add additional TLVs, so I
 449          * bump this up a bit.
 450          */
 451         uint8_t tlv[128];
 452 } __packed;
 453
 454 /*
 455  * This scan handle Country Information IE(802.11d compliant)
 456  * Define data structure for CMD_802_11_SCAN
 457  */
 458 struct cmd_ds_802_11_scan {
 459         struct cmd_header hdr;
 460
 461         uint8_t bsstype;
 462         uint8_t bssid[ETH_ALEN];
 463         uint8_t tlvbuffer[0];
 464 } __packed;
 465
 466 struct cmd_ds_802_11_scan_rsp {
 467         struct cmd_header hdr;
 468
 469         __le16 bssdescriptsize;
 470         uint8_t nr_sets;
 471         uint8_t bssdesc_and_tlvbuffer[0];
 472 } __packed;
 473
 474 struct cmd_ds_802_11_get_log {
 475         struct cmd_header hdr;
 476
 477         __le32 mcasttxframe;
 478         __le32 failed;
 479         __le32 retry;
 480         __le32 multiretry;
 481         __le32 framedup;
 482         __le32 rtssuccess;
 483         __le32 rtsfailure;
 484         __le32 ackfailure;
 485         __le32 rxfrag;
 486         __le32 mcastrxframe;
 487         __le32 fcserror;
 488         __le32 txframe;
 489         __le32 wepundecryptable;
 490 } __packed;
 491
 492 struct cmd_ds_mac_control {
 493         struct cmd_header hdr;
 494         __le16 action;
 495         u16 reserved;
 496 } __packed;
 497
 498 struct cmd_ds_mac_multicast_adr {
 499         struct cmd_header hdr;
 500         __le16 action;
 501         __le16 nr_of_adrs;
 502         u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
 503 } __packed;
 504
 505 struct cmd_ds_802_11_authenticate {
 506         struct cmd_header hdr;
 507
 508         u8 bssid[ETH_ALEN];
 509         u8 authtype;
 510         u8 reserved[10];
 511 } __packed;
 512
 513 struct cmd_ds_802_11_deauthenticate {
 514         struct cmd_header hdr;
 515
 516         u8 macaddr[ETH_ALEN];
 517         __le16 reasoncode;
 518 } __packed;
 519
 520 struct cmd_ds_802_11_associate {
 521         struct cmd_header hdr;
 522
 523         u8 bssid[6];
 524         __le16 capability;
 525         __le16 listeninterval;
 526         __le16 bcnperiod;
 527         u8 dtimperiod;
 528         u8 iebuf[512];    /* Enough for required and most optional IEs */
 529 } __packed;
 530
 531 struct cmd_ds_802_11_associate_response {
 532         struct cmd_header hdr;
 533
 534         __le16 capability;
 535         __le16 statuscode;
 536         __le16 aid;
 537         u8 iebuf[512];
 538 } __packed;
 539
 540 struct cmd_ds_802_11_set_wep {
 541         struct cmd_header hdr;
 542
 543         /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
 544         __le16 action;
 545
 546         /* key Index selected for Tx */
 547         __le16 keyindex;
 548
 549         /* 40, 128bit or TXWEP */
 550         uint8_t keytype[4];
 551         uint8_t keymaterial[4][16];
 552 } __packed;
 553
 554 struct cmd_ds_802_11_snmp_mib {
 555         struct cmd_header hdr;
 556
 557         __le16 action;
 558         __le16 oid;
 559         __le16 bufsize;
 560         u8 value[128];
 561 } __packed;
 562
 563 struct cmd_ds_reg_access {
 564         struct cmd_header hdr;
 565
 566         __le16 action;
 567         __le16 offset;
 568         union {
 569                 u8 bbp_rf;  /* for BBP and RF registers */
 570                 __le32 mac; /* for MAC registers */
 571         } value;
 572 } __packed;
 573
 574 struct cmd_ds_802_11_radio_control {
 575         struct cmd_header hdr;
 576
 577         __le16 action;
 578         __le16 control;
 579 } __packed;
 580
 581 struct cmd_ds_802_11_beacon_control {
 582         struct cmd_header hdr;
 583
 584         __le16 action;
 585         __le16 beacon_enable;
 586         __le16 beacon_period;
 587 } __packed;
 588
 589 struct cmd_ds_802_11_sleep_params {
 590         struct cmd_header hdr;
 591
 592         /* ACT_GET/ACT_SET */
 593         __le16 action;
 594
 595         /* Sleep clock error in ppm */
 596         __le16 error;
 597
 598         /* Wakeup offset in usec */
 599         __le16 offset;
 600
 601         /* Clock stabilization time in usec */
 602         __le16 stabletime;
 603
 604         /* control periodic calibration */
 605         uint8_t calcontrol;
 606
 607         /* control the use of external sleep clock */
 608         uint8_t externalsleepclk;
 609
 610         /* reserved field, should be set to zero */
 611         __le16 reserved;
 612 } __packed;
 613
 614 struct cmd_ds_802_11_rf_channel {
 615         struct cmd_header hdr;
 616
 617         __le16 action;
 618         __le16 channel;
 619         __le16 rftype;      /* unused */
 620         __le16 reserved;    /* unused */
 621         u8 channellist[32]; /* unused */
 622 } __packed;
 623
 624 struct cmd_ds_802_11_rssi {
 625         struct cmd_header hdr;
 626
 627         /* request:  number of beacons (N) to average the SNR and NF over
 628          * response: SNR of most recent beacon
 629          */
 630         __le16 n_or_snr;
 631
 632         /* The following fields are only set in the response.
 633          * In the request these are reserved and should be set to 0.
 634          */
 635         __le16 nf;       /* most recent beacon noise floor */
 636         __le16 avg_snr;  /* average SNR weighted by N from request */
 637         __le16 avg_nf;   /* average noise floor weighted by N from request */
 638 } __packed;
 639
 640 struct cmd_ds_802_11_mac_address {
 641         struct cmd_header hdr;
 642
 643         __le16 action;
 644         u8 macadd[ETH_ALEN];
 645 } __packed;
 646
 647 struct cmd_ds_802_11_rf_tx_power {
 648         struct cmd_header hdr;
 649
 650         __le16 action;
 651         __le16 curlevel;
 652         s8 maxlevel;
 653         s8 minlevel;
 654 } __packed;
 655
 656 /* MONITOR_MODE only exists in OLPC v5 firmware */
 657 struct cmd_ds_802_11_monitor_mode {
 658         struct cmd_header hdr;
 659
 660         __le16 action;
 661         __le16 mode;
 662 } __packed;
 663
 664 struct cmd_ds_set_boot2_ver {
 665         struct cmd_header hdr;
 666
 667         __le16 action;
 668         __le16 version;
 669 } __packed;
 670
 671 struct cmd_ds_802_11_fw_wake_method {
 672         struct cmd_header hdr;
 673
 674         __le16 action;
 675         __le16 method;
 676 } __packed;
 677
 678 struct cmd_ds_802_11_ps_mode {
 679         struct cmd_header hdr;
 680
 681         __le16 action;
 682
 683         /* Interval for keepalive in PS mode:
 684          * 0x0000 = don't change
 685          * 0x001E = firmware default
 686          * 0xFFFF = disable
 687          */
 688         __le16 nullpktinterval;
 689
 690         /* Number of DTIM intervals to wake up for:
 691          * 0 = don't change
 692          * 1 = firmware default
 693          * 5 = max
 694          */
 695         __le16 multipledtim;
 696
 697         __le16 reserved;
 698         __le16 locallisteninterval;
 699
 700         /* AdHoc awake period (FW v9+ only):
 701          * 0 = don't change
 702          * 1 = always awake (IEEE standard behavior)
 703          * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
 704          * 32 - 254 = invalid
 705          * 255 = sleep at each ATIM
 706          */
 707         __le16 adhoc_awake_period;
 708 } __packed;
 709
 710 struct cmd_confirm_sleep {
 711         struct cmd_header hdr;
 712
 713         __le16 action;
 714         __le16 nullpktinterval;
 715         __le16 multipledtim;
 716         __le16 reserved;
 717         __le16 locallisteninterval;
 718 } __packed;
 719
 720 struct cmd_ds_802_11_data_rate {
 721         struct cmd_header hdr;
 722
 723         __le16 action;
 724         __le16 reserved;
 725         u8 rates[MAX_RATES];
 726 } __packed;
 727
 728 struct cmd_ds_802_11_rate_adapt_rateset {
 729         struct cmd_header hdr;
 730         __le16 action;
 731         __le16 enablehwauto;
 732         __le16 bitmap;
 733 } __packed;
 734
 735 struct cmd_ds_802_11_ad_hoc_start {
 736         struct cmd_header hdr;
 737
 738         u8 ssid[IEEE80211_MAX_SSID_LEN];
 739         u8 bsstype;
 740         __le16 beaconperiod;
 741         u8 dtimperiod;   /* Reserved on v9 and later */
 742         struct ieee_ie_ibss_param_set ibss;
 743         u8 reserved1[4];
 744         struct ieee_ie_ds_param_set ds;
 745         u8 reserved2[4];
 746         __le16 probedelay;  /* Reserved on v9 and later */
 747         __le16 capability;
 748         u8 rates[MAX_RATES];
 749         u8 tlv_memory_size_pad[100];
 750 } __packed;
 751
 752 struct cmd_ds_802_11_ad_hoc_result {
 753         struct cmd_header hdr;
 754
 755         u8 pad[3];
 756         u8 bssid[ETH_ALEN];
 757 } __packed;
 758
 759 struct adhoc_bssdesc {
 760         u8 bssid[ETH_ALEN];
 761         u8 ssid[IEEE80211_MAX_SSID_LEN];
 762         u8 type;
 763         __le16 beaconperiod;
 764         u8 dtimperiod;
 765         __le64 timestamp;
 766         __le64 localtime;
 767         struct ieee_ie_ds_param_set ds;
 768         u8 reserved1[4];
 769         struct ieee_ie_ibss_param_set ibss;
 770         u8 reserved2[4];
 771         __le16 capability;
 772         u8 rates[MAX_RATES];
 773
 774         /* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
 775          * Adhoc join command and will cause a binary layout mismatch with
 776          * the firmware
 777          */
 778 } __packed;
 779
 780 struct cmd_ds_802_11_ad_hoc_join {
 781         struct cmd_header hdr;
 782
 783         struct adhoc_bssdesc bss;
 784         __le16 failtimeout;   /* Reserved on v9 and later */
 785         __le16 probedelay;    /* Reserved on v9 and later */
 786 } __packed;
 787
 788 struct cmd_ds_802_11_ad_hoc_stop {
 789         struct cmd_header hdr;
 790 } __packed;
 791
 792 struct cmd_ds_802_11_enable_rsn {
 793         struct cmd_header hdr;
 794
 795         __le16 action;
 796         __le16 enable;
 797 } __packed;
 798
 799 struct MrvlIEtype_keyParamSet {
 800         /* type ID */
 801         __le16 type;
 802
 803         /* length of Payload */
 804         __le16 length;
 805
 806         /* type of key: WEP=0, TKIP=1, AES=2 */
 807         __le16 keytypeid;
 808
 809         /* key control Info specific to a keytypeid */
 810         __le16 keyinfo;
 811
 812         /* length of key */
 813         __le16 keylen;
 814
 815         /* key material of size keylen */
 816         u8 key[32];
 817 } __packed;
 818
 819 #define MAX_WOL_RULES           16
 820
 821 struct host_wol_rule {
 822         uint8_t rule_no;
 823         uint8_t rule_ops;
 824         __le16 sig_offset;
 825         __le16 sig_length;
 826         __le16 reserve;
 827         __be32 sig_mask;
 828         __be32 signature;
 829 } __packed;
 830
 831 struct wol_config {
 832         uint8_t action;
 833         uint8_t pattern;
 834         uint8_t no_rules_in_cmd;
 835         uint8_t result;
 836         struct host_wol_rule rule[MAX_WOL_RULES];
 837 } __packed;
 838
 839 struct cmd_ds_host_sleep {
 840         struct cmd_header hdr;
 841         __le32 criteria;
 842         uint8_t gpio;
 843         uint16_t gap;
 844         struct wol_config wol_conf;
 845 } __packed;
 846
 847
 848
 849 struct cmd_ds_802_11_key_material {
 850         struct cmd_header hdr;
 851
 852         __le16 action;
 853         struct MrvlIEtype_keyParamSet keyParamSet[2];
 854 } __packed;
 855
 856 struct cmd_ds_802_11_eeprom_access {
 857         struct cmd_header hdr;
 858         __le16 action;
 859         __le16 offset;
 860         __le16 len;
 861         /* firmware says it returns a maximum of 20 bytes */
 862 #define LBS_EEPROM_READ_LEN 20
 863         u8 value[LBS_EEPROM_READ_LEN];
 864 } __packed;
 865
 866 struct cmd_ds_802_11_tpc_cfg {
 867         struct cmd_header hdr;
 868
 869         __le16 action;
 870         uint8_t enable;
 871         int8_t P0;
 872         int8_t P1;
 873         int8_t P2;
 874         uint8_t usesnr;
 875 } __packed;
 876
 877
 878 struct cmd_ds_802_11_pa_cfg {
 879         struct cmd_header hdr;
 880
 881         __le16 action;
 882         uint8_t enable;
 883         int8_t P0;
 884         int8_t P1;
 885         int8_t P2;
 886 } __packed;
 887
 888
 889 struct cmd_ds_802_11_led_ctrl {
 890         struct cmd_header hdr;
 891
 892         __le16 action;
 893         __le16 numled;
 894         u8 data[256];
 895 } __packed;
 896
 897 /* Automatic Frequency Control */
 898 struct cmd_ds_802_11_afc {
 899         struct cmd_header hdr;
 900
 901         __le16 afc_auto;
 902         union {
 903                 struct {
 904                         __le16 threshold;
 905                         __le16 period;
 906                 };
 907                 struct {
 908                         __le16 timing_offset; /* signed */
 909                         __le16 carrier_offset; /* signed */
 910                 };
 911         };
 912 } __packed;
 913
 914 struct cmd_tx_rate_query {
 915         __le16 txrate;
 916 } __packed;
 917
 918 struct cmd_ds_get_tsf {
 919         __le64 tsfvalue;
 920 } __packed;
 921
 922 struct cmd_ds_bt_access {
 923         struct cmd_header hdr;
 924
 925         __le16 action;
 926         __le32 id;
 927         u8 addr1[ETH_ALEN];
 928         u8 addr2[ETH_ALEN];
 929 } __packed;
 930
 931 struct cmd_ds_fwt_access {
 932         struct cmd_header hdr;
 933
 934         __le16 action;
 935         __le32 id;
 936         u8 valid;
 937         u8 da[ETH_ALEN];
 938         u8 dir;
 939         u8 ra[ETH_ALEN];
 940         __le32 ssn;
 941         __le32 dsn;
 942         __le32 metric;
 943         u8 rate;
 944         u8 hopcount;
 945         u8 ttl;
 946         __le32 expiration;
 947         u8 sleepmode;
 948         __le32 snr;
 949         __le32 references;
 950         u8 prec[ETH_ALEN];
 951 } __packed;
 952
 953 struct cmd_ds_mesh_config {
 954         struct cmd_header hdr;
 955
 956         __le16 action;
 957         __le16 channel;
 958         __le16 type;
 959         __le16 length;
 960         u8 data[128];   /* last position reserved */
 961 } __packed;
 962
 963 struct cmd_ds_mesh_access {
 964         struct cmd_header hdr;
 965
 966         __le16 action;
 967         __le32 data[32];        /* last position reserved */
 968 } __packed;
 969
 970 /* Number of stats counters returned by the firmware */
 971 #define MESH_STATS_NUM 8
 972 #endif