2 * linux/fs/ext4/indirect.c
6 * linux/fs/ext4/inode.c
8 * Copyright (C) 1992, 1993, 1994, 1995
9 * Remy Card (card@masi.ibp.fr)
10 * Laboratoire MASI - Institut Blaise Pascal
11 * Universite Pierre et Marie Curie (Paris VI)
15 * linux/fs/minix/inode.c
17 * Copyright (C) 1991, 1992 Linus Torvalds
19 * Goal-directed block allocation by Stephen Tweedie
20 * (sct@redhat.com), 1993, 1998
23 #include <linux/aio.h>
24 #include "ext4_jbd2.h"
26 #include "ext4_extents.h" /* Needed for EXT_MAX_BLOCKS */
28 #include <trace/events/ext4.h>
33 struct buffer_head
*bh
;
36 static inline void add_chain(Indirect
*p
, struct buffer_head
*bh
, __le32
*v
)
43 * ext4_block_to_path - parse the block number into array of offsets
44 * @inode: inode in question (we are only interested in its superblock)
45 * @i_block: block number to be parsed
46 * @offsets: array to store the offsets in
47 * @boundary: set this non-zero if the referred-to block is likely to be
48 * followed (on disk) by an indirect block.
50 * To store the locations of file's data ext4 uses a data structure common
51 * for UNIX filesystems - tree of pointers anchored in the inode, with
52 * data blocks at leaves and indirect blocks in intermediate nodes.
53 * This function translates the block number into path in that tree -
54 * return value is the path length and @offsets[n] is the offset of
55 * pointer to (n+1)th node in the nth one. If @block is out of range
56 * (negative or too large) warning is printed and zero returned.
58 * Note: function doesn't find node addresses, so no IO is needed. All
59 * we need to know is the capacity of indirect blocks (taken from the
64 * Portability note: the last comparison (check that we fit into triple
65 * indirect block) is spelled differently, because otherwise on an
66 * architecture with 32-bit longs and 8Kb pages we might get into trouble
67 * if our filesystem had 8Kb blocks. We might use long long, but that would
68 * kill us on x86. Oh, well, at least the sign propagation does not matter -
69 * i_block would have to be negative in the very beginning, so we would not
73 static int ext4_block_to_path(struct inode
*inode
,
75 ext4_lblk_t offsets
[4], int *boundary
)
77 int ptrs
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
78 int ptrs_bits
= EXT4_ADDR_PER_BLOCK_BITS(inode
->i_sb
);
79 const long direct_blocks
= EXT4_NDIR_BLOCKS
,
80 indirect_blocks
= ptrs
,
81 double_blocks
= (1 << (ptrs_bits
* 2));
85 if (i_block
< direct_blocks
) {
86 offsets
[n
++] = i_block
;
87 final
= direct_blocks
;
88 } else if ((i_block
-= direct_blocks
) < indirect_blocks
) {
89 offsets
[n
++] = EXT4_IND_BLOCK
;
90 offsets
[n
++] = i_block
;
92 } else if ((i_block
-= indirect_blocks
) < double_blocks
) {
93 offsets
[n
++] = EXT4_DIND_BLOCK
;
94 offsets
[n
++] = i_block
>> ptrs_bits
;
95 offsets
[n
++] = i_block
& (ptrs
- 1);
97 } else if (((i_block
-= double_blocks
) >> (ptrs_bits
* 2)) < ptrs
) {
98 offsets
[n
++] = EXT4_TIND_BLOCK
;
99 offsets
[n
++] = i_block
>> (ptrs_bits
* 2);
100 offsets
[n
++] = (i_block
>> ptrs_bits
) & (ptrs
- 1);
101 offsets
[n
++] = i_block
& (ptrs
- 1);
104 ext4_warning(inode
->i_sb
, "block %lu > max in inode %lu",
105 i_block
+ direct_blocks
+
106 indirect_blocks
+ double_blocks
, inode
->i_ino
);
109 *boundary
= final
- 1 - (i_block
& (ptrs
- 1));
114 * ext4_get_branch - read the chain of indirect blocks leading to data
115 * @inode: inode in question
116 * @depth: depth of the chain (1 - direct pointer, etc.)
117 * @offsets: offsets of pointers in inode/indirect blocks
118 * @chain: place to store the result
119 * @err: here we store the error value
121 * Function fills the array of triples <key, p, bh> and returns %NULL
122 * if everything went OK or the pointer to the last filled triple
123 * (incomplete one) otherwise. Upon the return chain[i].key contains
124 * the number of (i+1)-th block in the chain (as it is stored in memory,
125 * i.e. little-endian 32-bit), chain[i].p contains the address of that
126 * number (it points into struct inode for i==0 and into the bh->b_data
127 * for i>0) and chain[i].bh points to the buffer_head of i-th indirect
128 * block for i>0 and NULL for i==0. In other words, it holds the block
129 * numbers of the chain, addresses they were taken from (and where we can
130 * verify that chain did not change) and buffer_heads hosting these
133 * Function stops when it stumbles upon zero pointer (absent block)
134 * (pointer to last triple returned, *@err == 0)
135 * or when it gets an IO error reading an indirect block
136 * (ditto, *@err == -EIO)
137 * or when it reads all @depth-1 indirect blocks successfully and finds
138 * the whole chain, all way to the data (returns %NULL, *err == 0).
140 * Need to be called with
141 * down_read(&EXT4_I(inode)->i_data_sem)
143 static Indirect
*ext4_get_branch(struct inode
*inode
, int depth
,
144 ext4_lblk_t
*offsets
,
145 Indirect chain
[4], int *err
)
147 struct super_block
*sb
= inode
->i_sb
;
149 struct buffer_head
*bh
;
153 /* i_data is not going away, no lock needed */
154 add_chain(chain
, NULL
, EXT4_I(inode
)->i_data
+ *offsets
);
158 bh
= sb_getblk(sb
, le32_to_cpu(p
->key
));
164 if (!bh_uptodate_or_lock(bh
)) {
165 if (bh_submit_read(bh
) < 0) {
169 /* validate block references */
170 if (ext4_check_indirect_blockref(inode
, bh
)) {
176 add_chain(++p
, bh
, (__le32
*)bh
->b_data
+ *++offsets
);
190 * ext4_find_near - find a place for allocation with sufficient locality
192 * @ind: descriptor of indirect block.
194 * This function returns the preferred place for block allocation.
195 * It is used when heuristic for sequential allocation fails.
197 * + if there is a block to the left of our position - allocate near it.
198 * + if pointer will live in indirect block - allocate near that block.
199 * + if pointer will live in inode - allocate in the same
202 * In the latter case we colour the starting block by the callers PID to
203 * prevent it from clashing with concurrent allocations for a different inode
204 * in the same block group. The PID is used here so that functionally related
205 * files will be close-by on-disk.
207 * Caller must make sure that @ind is valid and will stay that way.
209 static ext4_fsblk_t
ext4_find_near(struct inode
*inode
, Indirect
*ind
)
211 struct ext4_inode_info
*ei
= EXT4_I(inode
);
212 __le32
*start
= ind
->bh
? (__le32
*) ind
->bh
->b_data
: ei
->i_data
;
215 /* Try to find previous block */
216 for (p
= ind
->p
- 1; p
>= start
; p
--) {
218 return le32_to_cpu(*p
);
221 /* No such thing, so let's try location of indirect block */
223 return ind
->bh
->b_blocknr
;
226 * It is going to be referred to from the inode itself? OK, just put it
227 * into the same cylinder group then.
229 return ext4_inode_to_goal_block(inode
);
233 * ext4_find_goal - find a preferred place for allocation.
235 * @block: block we want
236 * @partial: pointer to the last triple within a chain
238 * Normally this function find the preferred place for block allocation,
240 * Because this is only used for non-extent files, we limit the block nr
243 static ext4_fsblk_t
ext4_find_goal(struct inode
*inode
, ext4_lblk_t block
,
249 * XXX need to get goal block from mballoc's data structures
252 goal
= ext4_find_near(inode
, partial
);
253 goal
= goal
& EXT4_MAX_BLOCK_FILE_PHYS
;
258 * ext4_blks_to_allocate - Look up the block map and count the number
259 * of direct blocks need to be allocated for the given branch.
261 * @branch: chain of indirect blocks
262 * @k: number of blocks need for indirect blocks
263 * @blks: number of data blocks to be mapped.
264 * @blocks_to_boundary: the offset in the indirect block
266 * return the total number of blocks to be allocate, including the
267 * direct and indirect blocks.
269 static int ext4_blks_to_allocate(Indirect
*branch
, int k
, unsigned int blks
,
270 int blocks_to_boundary
)
272 unsigned int count
= 0;
275 * Simple case, [t,d]Indirect block(s) has not allocated yet
276 * then it's clear blocks on that path have not allocated
279 /* right now we don't handle cross boundary allocation */
280 if (blks
< blocks_to_boundary
+ 1)
283 count
+= blocks_to_boundary
+ 1;
288 while (count
< blks
&& count
<= blocks_to_boundary
&&
289 le32_to_cpu(*(branch
[0].p
+ count
)) == 0) {
296 * ext4_alloc_branch - allocate and set up a chain of blocks.
297 * @handle: handle for this transaction
299 * @indirect_blks: number of allocated indirect blocks
300 * @blks: number of allocated direct blocks
301 * @goal: preferred place for allocation
302 * @offsets: offsets (in the blocks) to store the pointers to next.
303 * @branch: place to store the chain in.
305 * This function allocates blocks, zeroes out all but the last one,
306 * links them into chain and (if we are synchronous) writes them to disk.
307 * In other words, it prepares a branch that can be spliced onto the
308 * inode. It stores the information about that chain in the branch[], in
309 * the same format as ext4_get_branch() would do. We are calling it after
310 * we had read the existing part of chain and partial points to the last
311 * triple of that (one with zero ->key). Upon the exit we have the same
312 * picture as after the successful ext4_get_block(), except that in one
313 * place chain is disconnected - *branch->p is still zero (we did not
314 * set the last link), but branch->key contains the number that should
315 * be placed into *branch->p to fill that gap.
317 * If allocation fails we free all blocks we've allocated (and forget
318 * their buffer_heads) and return the error value the from failed
319 * ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain
320 * as described above and return 0.
322 static int ext4_alloc_branch(handle_t
*handle
, struct inode
*inode
,
323 ext4_lblk_t iblock
, int indirect_blks
,
324 int *blks
, ext4_fsblk_t goal
,
325 ext4_lblk_t
*offsets
, Indirect
*branch
)
327 struct ext4_allocation_request ar
;
328 struct buffer_head
* bh
;
329 ext4_fsblk_t b
, new_blocks
[4];
331 int i
, j
, err
, len
= 1;
334 * Set up for the direct block allocation
336 memset(&ar
, 0, sizeof(ar
));
340 if (S_ISREG(inode
->i_mode
))
341 ar
.flags
= EXT4_MB_HINT_DATA
;
343 for (i
= 0; i
<= indirect_blks
; i
++) {
344 if (i
== indirect_blks
) {
346 new_blocks
[i
] = ext4_mb_new_blocks(handle
, &ar
, &err
);
348 goal
= new_blocks
[i
] = ext4_new_meta_blocks(handle
, inode
,
349 goal
, 0, NULL
, &err
);
354 branch
[i
].key
= cpu_to_le32(new_blocks
[i
]);
358 bh
= branch
[i
].bh
= sb_getblk(inode
->i_sb
, new_blocks
[i
-1]);
364 BUFFER_TRACE(bh
, "call get_create_access");
365 err
= ext4_journal_get_create_access(handle
, bh
);
371 memset(bh
->b_data
, 0, bh
->b_size
);
372 p
= branch
[i
].p
= (__le32
*) bh
->b_data
+ offsets
[i
];
375 if (i
== indirect_blks
)
377 for (j
= 0; j
< len
; j
++)
378 *p
++ = cpu_to_le32(b
++);
380 BUFFER_TRACE(bh
, "marking uptodate");
381 set_buffer_uptodate(bh
);
384 BUFFER_TRACE(bh
, "call ext4_handle_dirty_metadata");
385 err
= ext4_handle_dirty_metadata(handle
, inode
, bh
);
392 for (; i
>= 0; i
--) {
393 if (i
!= indirect_blks
&& branch
[i
].bh
)
394 ext4_forget(handle
, 1, inode
, branch
[i
].bh
,
395 branch
[i
].bh
->b_blocknr
);
396 ext4_free_blocks(handle
, inode
, NULL
, new_blocks
[i
],
397 (i
== indirect_blks
) ? ar
.len
: 1, 0);
403 * ext4_splice_branch - splice the allocated branch onto inode.
404 * @handle: handle for this transaction
406 * @block: (logical) number of block we are adding
407 * @chain: chain of indirect blocks (with a missing link - see
409 * @where: location of missing link
410 * @num: number of indirect blocks we are adding
411 * @blks: number of direct blocks we are adding
413 * This function fills the missing link and does all housekeeping needed in
414 * inode (->i_blocks, etc.). In case of success we end up with the full
415 * chain to new block and return 0.
417 static int ext4_splice_branch(handle_t
*handle
, struct inode
*inode
,
418 ext4_lblk_t block
, Indirect
*where
, int num
,
423 ext4_fsblk_t current_block
;
426 * If we're splicing into a [td]indirect block (as opposed to the
427 * inode) then we need to get write access to the [td]indirect block
431 BUFFER_TRACE(where
->bh
, "get_write_access");
432 err
= ext4_journal_get_write_access(handle
, where
->bh
);
438 *where
->p
= where
->key
;
441 * Update the host buffer_head or inode to point to more just allocated
442 * direct blocks blocks
444 if (num
== 0 && blks
> 1) {
445 current_block
= le32_to_cpu(where
->key
) + 1;
446 for (i
= 1; i
< blks
; i
++)
447 *(where
->p
+ i
) = cpu_to_le32(current_block
++);
450 /* We are done with atomic stuff, now do the rest of housekeeping */
451 /* had we spliced it onto indirect block? */
454 * If we spliced it onto an indirect block, we haven't
455 * altered the inode. Note however that if it is being spliced
456 * onto an indirect block at the very end of the file (the
457 * file is growing) then we *will* alter the inode to reflect
458 * the new i_size. But that is not done here - it is done in
459 * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode.
461 jbd_debug(5, "splicing indirect only\n");
462 BUFFER_TRACE(where
->bh
, "call ext4_handle_dirty_metadata");
463 err
= ext4_handle_dirty_metadata(handle
, inode
, where
->bh
);
468 * OK, we spliced it into the inode itself on a direct block.
470 ext4_mark_inode_dirty(handle
, inode
);
471 jbd_debug(5, "splicing direct\n");
476 for (i
= 1; i
<= num
; i
++) {
478 * branch[i].bh is newly allocated, so there is no
479 * need to revoke the block, which is why we don't
480 * need to set EXT4_FREE_BLOCKS_METADATA.
482 ext4_free_blocks(handle
, inode
, where
[i
].bh
, 0, 1,
483 EXT4_FREE_BLOCKS_FORGET
);
485 ext4_free_blocks(handle
, inode
, NULL
, le32_to_cpu(where
[num
].key
),
492 * The ext4_ind_map_blocks() function handles non-extents inodes
493 * (i.e., using the traditional indirect/double-indirect i_blocks
494 * scheme) for ext4_map_blocks().
496 * Allocation strategy is simple: if we have to allocate something, we will
497 * have to go the whole way to leaf. So let's do it before attaching anything
498 * to tree, set linkage between the newborn blocks, write them if sync is
499 * required, recheck the path, free and repeat if check fails, otherwise
500 * set the last missing link (that will protect us from any truncate-generated
501 * removals - all blocks on the path are immune now) and possibly force the
502 * write on the parent block.
503 * That has a nice additional property: no special recovery from the failed
504 * allocations is needed - we simply release blocks and do not touch anything
505 * reachable from inode.
507 * `handle' can be NULL if create == 0.
509 * return > 0, # of blocks mapped or allocated.
510 * return = 0, if plain lookup failed.
511 * return < 0, error case.
513 * The ext4_ind_get_blocks() function should be called with
514 * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem
515 * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or
516 * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system
519 int ext4_ind_map_blocks(handle_t
*handle
, struct inode
*inode
,
520 struct ext4_map_blocks
*map
,
524 ext4_lblk_t offsets
[4];
529 int blocks_to_boundary
= 0;
532 ext4_fsblk_t first_block
= 0;
534 trace_ext4_ind_map_blocks_enter(inode
, map
->m_lblk
, map
->m_len
, flags
);
535 J_ASSERT(!(ext4_test_inode_flag(inode
, EXT4_INODE_EXTENTS
)));
536 J_ASSERT(handle
!= NULL
|| (flags
& EXT4_GET_BLOCKS_CREATE
) == 0);
537 depth
= ext4_block_to_path(inode
, map
->m_lblk
, offsets
,
538 &blocks_to_boundary
);
543 partial
= ext4_get_branch(inode
, depth
, offsets
, chain
, &err
);
545 /* Simplest case - block found, no allocation needed */
547 first_block
= le32_to_cpu(chain
[depth
- 1].key
);
550 while (count
< map
->m_len
&& count
<= blocks_to_boundary
) {
553 blk
= le32_to_cpu(*(chain
[depth
-1].p
+ count
));
555 if (blk
== first_block
+ count
)
563 /* Next simple case - plain lookup or failed read of indirect block */
564 if ((flags
& EXT4_GET_BLOCKS_CREATE
) == 0 || err
== -EIO
)
568 * Okay, we need to do block allocation.
570 if (EXT4_HAS_RO_COMPAT_FEATURE(inode
->i_sb
,
571 EXT4_FEATURE_RO_COMPAT_BIGALLOC
)) {
572 EXT4_ERROR_INODE(inode
, "Can't allocate blocks for "
573 "non-extent mapped inodes with bigalloc");
577 goal
= ext4_find_goal(inode
, map
->m_lblk
, partial
);
579 /* the number of blocks need to allocate for [d,t]indirect blocks */
580 indirect_blks
= (chain
+ depth
) - partial
- 1;
583 * Next look up the indirect map to count the totoal number of
584 * direct blocks to allocate for this branch.
586 count
= ext4_blks_to_allocate(partial
, indirect_blks
,
587 map
->m_len
, blocks_to_boundary
);
589 * Block out ext4_truncate while we alter the tree
591 err
= ext4_alloc_branch(handle
, inode
, map
->m_lblk
, indirect_blks
,
593 offsets
+ (partial
- chain
), partial
);
596 * The ext4_splice_branch call will free and forget any buffers
597 * on the new chain if there is a failure, but that risks using
598 * up transaction credits, especially for bitmaps where the
599 * credits cannot be returned. Can we handle this somehow? We
600 * may need to return -EAGAIN upwards in the worst case. --sct
603 err
= ext4_splice_branch(handle
, inode
, map
->m_lblk
,
604 partial
, indirect_blks
, count
);
608 map
->m_flags
|= EXT4_MAP_NEW
;
610 ext4_update_inode_fsync_trans(handle
, inode
, 1);
612 map
->m_flags
|= EXT4_MAP_MAPPED
;
613 map
->m_pblk
= le32_to_cpu(chain
[depth
-1].key
);
615 if (count
> blocks_to_boundary
)
616 map
->m_flags
|= EXT4_MAP_BOUNDARY
;
618 /* Clean up and exit */
619 partial
= chain
+ depth
- 1; /* the whole chain */
621 while (partial
> chain
) {
622 BUFFER_TRACE(partial
->bh
, "call brelse");
627 trace_ext4_ind_map_blocks_exit(inode
, flags
, map
, err
);
632 * O_DIRECT for ext3 (or indirect map) based files
634 * If the O_DIRECT write will extend the file then add this inode to the
635 * orphan list. So recovery will truncate it back to the original size
636 * if the machine crashes during the write.
638 * If the O_DIRECT write is intantiating holes inside i_size and the machine
639 * crashes then stale disk data _may_ be exposed inside the file. But current
640 * VFS code falls back into buffered path in that case so we are safe.
642 ssize_t
ext4_ind_direct_IO(int rw
, struct kiocb
*iocb
,
643 const struct iovec
*iov
, loff_t offset
,
644 unsigned long nr_segs
)
646 struct file
*file
= iocb
->ki_filp
;
647 struct inode
*inode
= file
->f_mapping
->host
;
648 struct ext4_inode_info
*ei
= EXT4_I(inode
);
652 size_t count
= iov_length(iov
, nr_segs
);
656 loff_t final_size
= offset
+ count
;
658 if (final_size
> inode
->i_size
) {
659 /* Credits for sb + inode write */
660 handle
= ext4_journal_start(inode
, EXT4_HT_INODE
, 2);
661 if (IS_ERR(handle
)) {
662 ret
= PTR_ERR(handle
);
665 ret
= ext4_orphan_add(handle
, inode
);
667 ext4_journal_stop(handle
);
671 ei
->i_disksize
= inode
->i_size
;
672 ext4_journal_stop(handle
);
677 if (rw
== READ
&& ext4_should_dioread_nolock(inode
)) {
679 * Nolock dioread optimization may be dynamically disabled
680 * via ext4_inode_block_unlocked_dio(). Check inode's state
681 * while holding extra i_dio_count ref.
683 atomic_inc(&inode
->i_dio_count
);
685 if (unlikely(ext4_test_inode_state(inode
,
686 EXT4_STATE_DIOREAD_LOCK
))) {
687 inode_dio_done(inode
);
690 ret
= __blockdev_direct_IO(rw
, iocb
, inode
,
691 inode
->i_sb
->s_bdev
, iov
,
693 ext4_get_block
, NULL
, NULL
, 0);
694 inode_dio_done(inode
);
697 ret
= blockdev_direct_IO(rw
, iocb
, inode
, iov
,
698 offset
, nr_segs
, ext4_get_block
);
700 if (unlikely((rw
& WRITE
) && ret
< 0)) {
701 loff_t isize
= i_size_read(inode
);
702 loff_t end
= offset
+ iov_length(iov
, nr_segs
);
705 ext4_truncate_failed_write(inode
);
708 if (ret
== -ENOSPC
&& ext4_should_retry_alloc(inode
->i_sb
, &retries
))
714 /* Credits for sb + inode write */
715 handle
= ext4_journal_start(inode
, EXT4_HT_INODE
, 2);
716 if (IS_ERR(handle
)) {
717 /* This is really bad luck. We've written the data
718 * but cannot extend i_size. Bail out and pretend
719 * the write failed... */
720 ret
= PTR_ERR(handle
);
722 ext4_orphan_del(NULL
, inode
);
727 ext4_orphan_del(handle
, inode
);
729 loff_t end
= offset
+ ret
;
730 if (end
> inode
->i_size
) {
731 ei
->i_disksize
= end
;
732 i_size_write(inode
, end
);
734 * We're going to return a positive `ret'
735 * here due to non-zero-length I/O, so there's
736 * no way of reporting error returns from
737 * ext4_mark_inode_dirty() to userspace. So
740 ext4_mark_inode_dirty(handle
, inode
);
743 err
= ext4_journal_stop(handle
);
752 * Calculate the number of metadata blocks need to reserve
753 * to allocate a new block at @lblocks for non extent file based file
755 int ext4_ind_calc_metadata_amount(struct inode
*inode
, sector_t lblock
)
757 struct ext4_inode_info
*ei
= EXT4_I(inode
);
758 sector_t dind_mask
= ~((sector_t
)EXT4_ADDR_PER_BLOCK(inode
->i_sb
) - 1);
761 if (lblock
< EXT4_NDIR_BLOCKS
)
764 lblock
-= EXT4_NDIR_BLOCKS
;
766 if (ei
->i_da_metadata_calc_len
&&
767 (lblock
& dind_mask
) == ei
->i_da_metadata_calc_last_lblock
) {
768 ei
->i_da_metadata_calc_len
++;
771 ei
->i_da_metadata_calc_last_lblock
= lblock
& dind_mask
;
772 ei
->i_da_metadata_calc_len
= 1;
773 blk_bits
= order_base_2(lblock
);
774 return (blk_bits
/ EXT4_ADDR_PER_BLOCK_BITS(inode
->i_sb
)) + 1;
778 * Calculate number of indirect blocks touched by mapping @nrblocks logically
781 int ext4_ind_trans_blocks(struct inode
*inode
, int nrblocks
)
784 * With N contiguous data blocks, we need at most
785 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks,
786 * 2 dindirect blocks, and 1 tindirect block
788 return DIV_ROUND_UP(nrblocks
, EXT4_ADDR_PER_BLOCK(inode
->i_sb
)) + 4;
792 * Truncate transactions can be complex and absolutely huge. So we need to
793 * be able to restart the transaction at a conventient checkpoint to make
794 * sure we don't overflow the journal.
796 * Try to extend this transaction for the purposes of truncation. If
797 * extend fails, we need to propagate the failure up and restart the
798 * transaction in the top-level truncate loop. --sct
800 * Returns 0 if we managed to create more room. If we can't create more
801 * room, and the transaction must be restarted we return 1.
803 static int try_to_extend_transaction(handle_t
*handle
, struct inode
*inode
)
805 if (!ext4_handle_valid(handle
))
807 if (ext4_handle_has_enough_credits(handle
, EXT4_RESERVE_TRANS_BLOCKS
+1))
809 if (!ext4_journal_extend(handle
, ext4_blocks_for_truncate(inode
)))
815 * Probably it should be a library function... search for first non-zero word
816 * or memcmp with zero_page, whatever is better for particular architecture.
819 static inline int all_zeroes(__le32
*p
, __le32
*q
)
828 * ext4_find_shared - find the indirect blocks for partial truncation.
829 * @inode: inode in question
830 * @depth: depth of the affected branch
831 * @offsets: offsets of pointers in that branch (see ext4_block_to_path)
832 * @chain: place to store the pointers to partial indirect blocks
833 * @top: place to the (detached) top of branch
835 * This is a helper function used by ext4_truncate().
837 * When we do truncate() we may have to clean the ends of several
838 * indirect blocks but leave the blocks themselves alive. Block is
839 * partially truncated if some data below the new i_size is referred
840 * from it (and it is on the path to the first completely truncated
841 * data block, indeed). We have to free the top of that path along
842 * with everything to the right of the path. Since no allocation
843 * past the truncation point is possible until ext4_truncate()
844 * finishes, we may safely do the latter, but top of branch may
845 * require special attention - pageout below the truncation point
846 * might try to populate it.
848 * We atomically detach the top of branch from the tree, store the
849 * block number of its root in *@top, pointers to buffer_heads of
850 * partially truncated blocks - in @chain[].bh and pointers to
851 * their last elements that should not be removed - in
852 * @chain[].p. Return value is the pointer to last filled element
855 * The work left to caller to do the actual freeing of subtrees:
856 * a) free the subtree starting from *@top
857 * b) free the subtrees whose roots are stored in
858 * (@chain[i].p+1 .. end of @chain[i].bh->b_data)
859 * c) free the subtrees growing from the inode past the @chain[0].
860 * (no partially truncated stuff there). */
862 static Indirect
*ext4_find_shared(struct inode
*inode
, int depth
,
863 ext4_lblk_t offsets
[4], Indirect chain
[4],
866 Indirect
*partial
, *p
;
870 /* Make k index the deepest non-null offset + 1 */
871 for (k
= depth
; k
> 1 && !offsets
[k
-1]; k
--)
873 partial
= ext4_get_branch(inode
, k
, offsets
, chain
, &err
);
874 /* Writer: pointers */
876 partial
= chain
+ k
-1;
878 * If the branch acquired continuation since we've looked at it -
879 * fine, it should all survive and (new) top doesn't belong to us.
881 if (!partial
->key
&& *partial
->p
)
884 for (p
= partial
; (p
> chain
) && all_zeroes((__le32
*) p
->bh
->b_data
, p
->p
); p
--)
887 * OK, we've found the last block that must survive. The rest of our
888 * branch should be detached before unlocking. However, if that rest
889 * of branch is all ours and does not grow immediately from the inode
890 * it's easier to cheat and just decrement partial->p.
892 if (p
== chain
+ k
- 1 && p
> chain
) {
896 /* Nope, don't do this in ext4. Must leave the tree intact */
903 while (partial
> p
) {
912 * Zero a number of block pointers in either an inode or an indirect block.
913 * If we restart the transaction we must again get write access to the
914 * indirect block for further modification.
916 * We release `count' blocks on disk, but (last - first) may be greater
917 * than `count' because there can be holes in there.
919 * Return 0 on success, 1 on invalid block range
920 * and < 0 on fatal error.
922 static int ext4_clear_blocks(handle_t
*handle
, struct inode
*inode
,
923 struct buffer_head
*bh
,
924 ext4_fsblk_t block_to_free
,
925 unsigned long count
, __le32
*first
,
929 int flags
= EXT4_FREE_BLOCKS_VALIDATED
;
932 if (S_ISDIR(inode
->i_mode
) || S_ISLNK(inode
->i_mode
))
933 flags
|= EXT4_FREE_BLOCKS_FORGET
| EXT4_FREE_BLOCKS_METADATA
;
934 else if (ext4_should_journal_data(inode
))
935 flags
|= EXT4_FREE_BLOCKS_FORGET
;
937 if (!ext4_data_block_valid(EXT4_SB(inode
->i_sb
), block_to_free
,
939 EXT4_ERROR_INODE(inode
, "attempt to clear invalid "
940 "blocks %llu len %lu",
941 (unsigned long long) block_to_free
, count
);
945 if (try_to_extend_transaction(handle
, inode
)) {
947 BUFFER_TRACE(bh
, "call ext4_handle_dirty_metadata");
948 err
= ext4_handle_dirty_metadata(handle
, inode
, bh
);
952 err
= ext4_mark_inode_dirty(handle
, inode
);
955 err
= ext4_truncate_restart_trans(handle
, inode
,
956 ext4_blocks_for_truncate(inode
));
960 BUFFER_TRACE(bh
, "retaking write access");
961 err
= ext4_journal_get_write_access(handle
, bh
);
967 for (p
= first
; p
< last
; p
++)
970 ext4_free_blocks(handle
, inode
, NULL
, block_to_free
, count
, flags
);
973 ext4_std_error(inode
->i_sb
, err
);
978 * ext4_free_data - free a list of data blocks
979 * @handle: handle for this transaction
980 * @inode: inode we are dealing with
981 * @this_bh: indirect buffer_head which contains *@first and *@last
982 * @first: array of block numbers
983 * @last: points immediately past the end of array
985 * We are freeing all blocks referred from that array (numbers are stored as
986 * little-endian 32-bit) and updating @inode->i_blocks appropriately.
988 * We accumulate contiguous runs of blocks to free. Conveniently, if these
989 * blocks are contiguous then releasing them at one time will only affect one
990 * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't
991 * actually use a lot of journal space.
993 * @this_bh will be %NULL if @first and @last point into the inode's direct
996 static void ext4_free_data(handle_t
*handle
, struct inode
*inode
,
997 struct buffer_head
*this_bh
,
998 __le32
*first
, __le32
*last
)
1000 ext4_fsblk_t block_to_free
= 0; /* Starting block # of a run */
1001 unsigned long count
= 0; /* Number of blocks in the run */
1002 __le32
*block_to_free_p
= NULL
; /* Pointer into inode/ind
1005 ext4_fsblk_t nr
; /* Current block # */
1006 __le32
*p
; /* Pointer into inode/ind
1007 for current block */
1010 if (this_bh
) { /* For indirect block */
1011 BUFFER_TRACE(this_bh
, "get_write_access");
1012 err
= ext4_journal_get_write_access(handle
, this_bh
);
1013 /* Important: if we can't update the indirect pointers
1014 * to the blocks, we can't free them. */
1019 for (p
= first
; p
< last
; p
++) {
1020 nr
= le32_to_cpu(*p
);
1022 /* accumulate blocks to free if they're contiguous */
1025 block_to_free_p
= p
;
1027 } else if (nr
== block_to_free
+ count
) {
1030 err
= ext4_clear_blocks(handle
, inode
, this_bh
,
1031 block_to_free
, count
,
1032 block_to_free_p
, p
);
1036 block_to_free_p
= p
;
1042 if (!err
&& count
> 0)
1043 err
= ext4_clear_blocks(handle
, inode
, this_bh
, block_to_free
,
1044 count
, block_to_free_p
, p
);
1050 BUFFER_TRACE(this_bh
, "call ext4_handle_dirty_metadata");
1053 * The buffer head should have an attached journal head at this
1054 * point. However, if the data is corrupted and an indirect
1055 * block pointed to itself, it would have been detached when
1056 * the block was cleared. Check for this instead of OOPSing.
1058 if ((EXT4_JOURNAL(inode
) == NULL
) || bh2jh(this_bh
))
1059 ext4_handle_dirty_metadata(handle
, inode
, this_bh
);
1061 EXT4_ERROR_INODE(inode
,
1062 "circular indirect block detected at "
1064 (unsigned long long) this_bh
->b_blocknr
);
1069 * ext4_free_branches - free an array of branches
1070 * @handle: JBD handle for this transaction
1071 * @inode: inode we are dealing with
1072 * @parent_bh: the buffer_head which contains *@first and *@last
1073 * @first: array of block numbers
1074 * @last: pointer immediately past the end of array
1075 * @depth: depth of the branches to free
1077 * We are freeing all blocks referred from these branches (numbers are
1078 * stored as little-endian 32-bit) and updating @inode->i_blocks
1081 static void ext4_free_branches(handle_t
*handle
, struct inode
*inode
,
1082 struct buffer_head
*parent_bh
,
1083 __le32
*first
, __le32
*last
, int depth
)
1088 if (ext4_handle_is_aborted(handle
))
1092 struct buffer_head
*bh
;
1093 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1095 while (--p
>= first
) {
1096 nr
= le32_to_cpu(*p
);
1098 continue; /* A hole */
1100 if (!ext4_data_block_valid(EXT4_SB(inode
->i_sb
),
1102 EXT4_ERROR_INODE(inode
,
1103 "invalid indirect mapped "
1104 "block %lu (level %d)",
1105 (unsigned long) nr
, depth
);
1109 /* Go read the buffer for the next level down */
1110 bh
= sb_bread(inode
->i_sb
, nr
);
1113 * A read failure? Report error and clear slot
1117 EXT4_ERROR_INODE_BLOCK(inode
, nr
,
1122 /* This zaps the entire block. Bottom up. */
1123 BUFFER_TRACE(bh
, "free child branches");
1124 ext4_free_branches(handle
, inode
, bh
,
1125 (__le32
*) bh
->b_data
,
1126 (__le32
*) bh
->b_data
+ addr_per_block
,
1131 * Everything below this this pointer has been
1132 * released. Now let this top-of-subtree go.
1134 * We want the freeing of this indirect block to be
1135 * atomic in the journal with the updating of the
1136 * bitmap block which owns it. So make some room in
1139 * We zero the parent pointer *after* freeing its
1140 * pointee in the bitmaps, so if extend_transaction()
1141 * for some reason fails to put the bitmap changes and
1142 * the release into the same transaction, recovery
1143 * will merely complain about releasing a free block,
1144 * rather than leaking blocks.
1146 if (ext4_handle_is_aborted(handle
))
1148 if (try_to_extend_transaction(handle
, inode
)) {
1149 ext4_mark_inode_dirty(handle
, inode
);
1150 ext4_truncate_restart_trans(handle
, inode
,
1151 ext4_blocks_for_truncate(inode
));
1155 * The forget flag here is critical because if
1156 * we are journaling (and not doing data
1157 * journaling), we have to make sure a revoke
1158 * record is written to prevent the journal
1159 * replay from overwriting the (former)
1160 * indirect block if it gets reallocated as a
1161 * data block. This must happen in the same
1162 * transaction where the data blocks are
1165 ext4_free_blocks(handle
, inode
, NULL
, nr
, 1,
1166 EXT4_FREE_BLOCKS_METADATA
|
1167 EXT4_FREE_BLOCKS_FORGET
);
1171 * The block which we have just freed is
1172 * pointed to by an indirect block: journal it
1174 BUFFER_TRACE(parent_bh
, "get_write_access");
1175 if (!ext4_journal_get_write_access(handle
,
1178 BUFFER_TRACE(parent_bh
,
1179 "call ext4_handle_dirty_metadata");
1180 ext4_handle_dirty_metadata(handle
,
1187 /* We have reached the bottom of the tree. */
1188 BUFFER_TRACE(parent_bh
, "free data blocks");
1189 ext4_free_data(handle
, inode
, parent_bh
, first
, last
);
1193 void ext4_ind_truncate(handle_t
*handle
, struct inode
*inode
)
1195 struct ext4_inode_info
*ei
= EXT4_I(inode
);
1196 __le32
*i_data
= ei
->i_data
;
1197 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1198 ext4_lblk_t offsets
[4];
1203 ext4_lblk_t last_block
, max_block
;
1204 unsigned blocksize
= inode
->i_sb
->s_blocksize
;
1206 last_block
= (inode
->i_size
+ blocksize
-1)
1207 >> EXT4_BLOCK_SIZE_BITS(inode
->i_sb
);
1208 max_block
= (EXT4_SB(inode
->i_sb
)->s_bitmap_maxbytes
+ blocksize
-1)
1209 >> EXT4_BLOCK_SIZE_BITS(inode
->i_sb
);
1211 if (last_block
!= max_block
) {
1212 n
= ext4_block_to_path(inode
, last_block
, offsets
, NULL
);
1217 ext4_es_remove_extent(inode
, last_block
, EXT_MAX_BLOCKS
- last_block
);
1220 * The orphan list entry will now protect us from any crash which
1221 * occurs before the truncate completes, so it is now safe to propagate
1222 * the new, shorter inode size (held for now in i_size) into the
1223 * on-disk inode. We do this via i_disksize, which is the value which
1224 * ext4 *really* writes onto the disk inode.
1226 ei
->i_disksize
= inode
->i_size
;
1228 if (last_block
== max_block
) {
1230 * It is unnecessary to free any data blocks if last_block is
1231 * equal to the indirect block limit.
1234 } else if (n
== 1) { /* direct blocks */
1235 ext4_free_data(handle
, inode
, NULL
, i_data
+offsets
[0],
1236 i_data
+ EXT4_NDIR_BLOCKS
);
1240 partial
= ext4_find_shared(inode
, n
, offsets
, chain
, &nr
);
1241 /* Kill the top of shared branch (not detached) */
1243 if (partial
== chain
) {
1244 /* Shared branch grows from the inode */
1245 ext4_free_branches(handle
, inode
, NULL
,
1246 &nr
, &nr
+1, (chain
+n
-1) - partial
);
1249 * We mark the inode dirty prior to restart,
1250 * and prior to stop. No need for it here.
1253 /* Shared branch grows from an indirect block */
1254 BUFFER_TRACE(partial
->bh
, "get_write_access");
1255 ext4_free_branches(handle
, inode
, partial
->bh
,
1257 partial
->p
+1, (chain
+n
-1) - partial
);
1260 /* Clear the ends of indirect blocks on the shared branch */
1261 while (partial
> chain
) {
1262 ext4_free_branches(handle
, inode
, partial
->bh
, partial
->p
+ 1,
1263 (__le32
*)partial
->bh
->b_data
+addr_per_block
,
1264 (chain
+n
-1) - partial
);
1265 BUFFER_TRACE(partial
->bh
, "call brelse");
1266 brelse(partial
->bh
);
1270 /* Kill the remaining (whole) subtrees */
1271 switch (offsets
[0]) {
1273 nr
= i_data
[EXT4_IND_BLOCK
];
1275 ext4_free_branches(handle
, inode
, NULL
, &nr
, &nr
+1, 1);
1276 i_data
[EXT4_IND_BLOCK
] = 0;
1278 case EXT4_IND_BLOCK
:
1279 nr
= i_data
[EXT4_DIND_BLOCK
];
1281 ext4_free_branches(handle
, inode
, NULL
, &nr
, &nr
+1, 2);
1282 i_data
[EXT4_DIND_BLOCK
] = 0;
1284 case EXT4_DIND_BLOCK
:
1285 nr
= i_data
[EXT4_TIND_BLOCK
];
1287 ext4_free_branches(handle
, inode
, NULL
, &nr
, &nr
+1, 3);
1288 i_data
[EXT4_TIND_BLOCK
] = 0;
1290 case EXT4_TIND_BLOCK
:
1295 static int free_hole_blocks(handle_t
*handle
, struct inode
*inode
,
1296 struct buffer_head
*parent_bh
, __le32
*i_data
,
1297 int level
, ext4_lblk_t first
,
1298 ext4_lblk_t count
, int max
)
1300 struct buffer_head
*bh
= NULL
;
1301 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1307 inc
= 1 << ((EXT4_BLOCK_SIZE_BITS(inode
->i_sb
) - 2) * level
);
1308 for (i
= 0, offset
= 0; i
< max
; i
++, i_data
++, offset
+= inc
) {
1309 if (offset
>= count
+ first
)
1311 if (*i_data
== 0 || (offset
+ inc
) <= first
)
1316 bh
= sb_bread(inode
->i_sb
, le32_to_cpu(blk
));
1318 EXT4_ERROR_INODE_BLOCK(inode
, le32_to_cpu(blk
),
1322 first2
= (first
> offset
) ? first
- offset
: 0;
1323 ret
= free_hole_blocks(handle
, inode
, bh
,
1324 (__le32
*)bh
->b_data
, level
- 1,
1325 first2
, count
- offset
,
1326 inode
->i_sb
->s_blocksize
>> 2);
1333 (bh
&& all_zeroes((__le32
*)bh
->b_data
,
1334 (__le32
*)bh
->b_data
+ addr_per_block
))) {
1335 ext4_free_data(handle
, inode
, parent_bh
, &blk
, &blk
+1);
1346 int ext4_free_hole_blocks(handle_t
*handle
, struct inode
*inode
,
1347 ext4_lblk_t first
, ext4_lblk_t stop
)
1349 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1351 int num
= EXT4_NDIR_BLOCKS
;
1352 ext4_lblk_t count
, max
= EXT4_NDIR_BLOCKS
;
1353 __le32
*i_data
= EXT4_I(inode
)->i_data
;
1355 count
= stop
- first
;
1356 for (level
= 0; level
< 4; level
++, max
*= addr_per_block
) {
1358 ret
= free_hole_blocks(handle
, inode
, NULL
, i_data
,
1359 level
, first
, count
, num
);
1362 if (count
> max
- first
)
1363 count
-= max
- first
;