1 /* ------------------------------------------------------------
3 * (C) Copyright IBM Corporation 1994, 2004
4 * Authors: Colin DeVilbiss (devilbis@us.ibm.com)
5 * Santiago Leon (santil@us.ibm.com)
6 * Dave Boutcher (sleddog@us.ibm.com)
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
23 * ------------------------------------------------------------
24 * Emulation of a SCSI host adapter for Virtual I/O devices
26 * This driver supports the SCSI adapter implemented by the IBM
27 * Power5 firmware. That SCSI adapter is not a physical adapter,
28 * but allows Linux SCSI peripheral drivers to directly
29 * access devices in another logical partition on the physical system.
31 * The virtual adapter(s) are present in the open firmware device
32 * tree just like real adapters.
34 * One of the capabilities provided on these systems is the ability
35 * to DMA between partitions. The architecture states that for VSCSI,
36 * the server side is allowed to DMA to and from the client. The client
37 * is never trusted to DMA to or from the server directly.
39 * Messages are sent between partitions on a "Command/Response Queue"
40 * (CRQ), which is just a buffer of 16 byte entries in the receiver's
41 * Senders cannot access the buffer directly, but send messages by
42 * making a hypervisor call and passing in the 16 bytes. The hypervisor
43 * puts the message in the next 16 byte space in round-robin fashion,
44 * turns on the high order bit of the message (the valid bit), and
45 * generates an interrupt to the receiver (if interrupts are turned on.)
46 * The receiver just turns off the valid bit when they have copied out
49 * The VSCSI client builds a SCSI Remote Protocol (SRP) Information Unit
50 * (IU) (as defined in the T10 standard available at www.t10.org), gets
51 * a DMA address for the message, and sends it to the server as the
52 * payload of a CRQ message. The server DMAs the SRP IU and processes it,
53 * including doing any additional data transfers. When it is done, it
54 * DMAs the SRP response back to the same address as the request came from,
55 * and sends a CRQ message back to inform the client that the request has
58 * TODO: This is currently pretty tied to the IBM pSeries hypervisor
59 * interfaces. It would be really nice to abstract this above an RDMA
63 #include <linux/module.h>
64 #include <linux/moduleparam.h>
65 #include <linux/dma-mapping.h>
66 #include <linux/delay.h>
67 #include <linux/slab.h>
70 #include <linux/kthread.h>
71 #include <asm/firmware.h>
73 #include <scsi/scsi.h>
74 #include <scsi/scsi_cmnd.h>
75 #include <scsi/scsi_host.h>
76 #include <scsi/scsi_device.h>
77 #include <scsi/scsi_transport_srp.h>
80 /* The values below are somewhat arbitrary default values, but
81 * OS/400 will use 3 busses (disks, CDs, tapes, I think.)
82 * Note that there are 3 bits of channel value, 6 bits of id, and
85 static int max_id
= 64;
86 static int max_channel
= 3;
87 static int init_timeout
= 300;
88 static int login_timeout
= 60;
89 static int info_timeout
= 30;
90 static int abort_timeout
= 60;
91 static int reset_timeout
= 60;
92 static int max_requests
= IBMVSCSI_MAX_REQUESTS_DEFAULT
;
93 static int max_events
= IBMVSCSI_MAX_REQUESTS_DEFAULT
+ 2;
94 static int fast_fail
= 1;
95 static int client_reserve
= 1;
96 static char partition_name
[97] = "UNKNOWN";
97 static unsigned int partition_number
= -1;
99 static struct scsi_transport_template
*ibmvscsi_transport_template
;
101 #define IBMVSCSI_VERSION "1.5.9"
103 MODULE_DESCRIPTION("IBM Virtual SCSI");
104 MODULE_AUTHOR("Dave Boutcher");
105 MODULE_LICENSE("GPL");
106 MODULE_VERSION(IBMVSCSI_VERSION
);
108 module_param_named(max_id
, max_id
, int, S_IRUGO
| S_IWUSR
);
109 MODULE_PARM_DESC(max_id
, "Largest ID value for each channel");
110 module_param_named(max_channel
, max_channel
, int, S_IRUGO
| S_IWUSR
);
111 MODULE_PARM_DESC(max_channel
, "Largest channel value");
112 module_param_named(init_timeout
, init_timeout
, int, S_IRUGO
| S_IWUSR
);
113 MODULE_PARM_DESC(init_timeout
, "Initialization timeout in seconds");
114 module_param_named(max_requests
, max_requests
, int, S_IRUGO
);
115 MODULE_PARM_DESC(max_requests
, "Maximum requests for this adapter");
116 module_param_named(fast_fail
, fast_fail
, int, S_IRUGO
| S_IWUSR
);
117 MODULE_PARM_DESC(fast_fail
, "Enable fast fail. [Default=1]");
118 module_param_named(client_reserve
, client_reserve
, int, S_IRUGO
);
119 MODULE_PARM_DESC(client_reserve
, "Attempt client managed reserve/release");
121 static void ibmvscsi_handle_crq(struct viosrp_crq
*crq
,
122 struct ibmvscsi_host_data
*hostdata
);
124 /* ------------------------------------------------------------
125 * Routines for managing the command/response queue
128 * ibmvscsi_handle_event: - Interrupt handler for crq events
129 * @irq: number of irq to handle, not used
130 * @dev_instance: ibmvscsi_host_data of host that received interrupt
132 * Disables interrupts and schedules srp_task
133 * Always returns IRQ_HANDLED
135 static irqreturn_t
ibmvscsi_handle_event(int irq
, void *dev_instance
)
137 struct ibmvscsi_host_data
*hostdata
=
138 (struct ibmvscsi_host_data
*)dev_instance
;
139 vio_disable_interrupts(to_vio_dev(hostdata
->dev
));
140 tasklet_schedule(&hostdata
->srp_task
);
145 * release_crq_queue: - Deallocates data and unregisters CRQ
146 * @queue: crq_queue to initialize and register
147 * @host_data: ibmvscsi_host_data of host
149 * Frees irq, deallocates a page for messages, unmaps dma, and unregisters
150 * the crq with the hypervisor.
152 static void ibmvscsi_release_crq_queue(struct crq_queue
*queue
,
153 struct ibmvscsi_host_data
*hostdata
,
157 struct vio_dev
*vdev
= to_vio_dev(hostdata
->dev
);
158 free_irq(vdev
->irq
, (void *)hostdata
);
159 tasklet_kill(&hostdata
->srp_task
);
163 rc
= plpar_hcall_norets(H_FREE_CRQ
, vdev
->unit_address
);
164 } while ((rc
== H_BUSY
) || (H_IS_LONG_BUSY(rc
)));
165 dma_unmap_single(hostdata
->dev
,
167 queue
->size
* sizeof(*queue
->msgs
), DMA_BIDIRECTIONAL
);
168 free_page((unsigned long)queue
->msgs
);
172 * crq_queue_next_crq: - Returns the next entry in message queue
173 * @queue: crq_queue to use
175 * Returns pointer to next entry in queue, or NULL if there are no new
176 * entried in the CRQ.
178 static struct viosrp_crq
*crq_queue_next_crq(struct crq_queue
*queue
)
180 struct viosrp_crq
*crq
;
183 spin_lock_irqsave(&queue
->lock
, flags
);
184 crq
= &queue
->msgs
[queue
->cur
];
185 if (crq
->valid
& 0x80) {
186 if (++queue
->cur
== queue
->size
)
190 spin_unlock_irqrestore(&queue
->lock
, flags
);
196 * ibmvscsi_send_crq: - Send a CRQ
197 * @hostdata: the adapter
198 * @word1: the first 64 bits of the data
199 * @word2: the second 64 bits of the data
201 static int ibmvscsi_send_crq(struct ibmvscsi_host_data
*hostdata
,
202 u64 word1
, u64 word2
)
204 struct vio_dev
*vdev
= to_vio_dev(hostdata
->dev
);
206 return plpar_hcall_norets(H_SEND_CRQ
, vdev
->unit_address
, word1
, word2
);
210 * ibmvscsi_task: - Process srps asynchronously
211 * @data: ibmvscsi_host_data of host
213 static void ibmvscsi_task(void *data
)
215 struct ibmvscsi_host_data
*hostdata
= (struct ibmvscsi_host_data
*)data
;
216 struct vio_dev
*vdev
= to_vio_dev(hostdata
->dev
);
217 struct viosrp_crq
*crq
;
221 /* Pull all the valid messages off the CRQ */
222 while ((crq
= crq_queue_next_crq(&hostdata
->queue
)) != NULL
) {
223 ibmvscsi_handle_crq(crq
, hostdata
);
227 vio_enable_interrupts(vdev
);
228 crq
= crq_queue_next_crq(&hostdata
->queue
);
230 vio_disable_interrupts(vdev
);
231 ibmvscsi_handle_crq(crq
, hostdata
);
239 static void gather_partition_info(void)
241 struct device_node
*rootdn
;
243 const char *ppartition_name
;
244 const unsigned int *p_number_ptr
;
246 /* Retrieve information about this partition */
247 rootdn
= of_find_node_by_path("/");
252 ppartition_name
= of_get_property(rootdn
, "ibm,partition-name", NULL
);
254 strncpy(partition_name
, ppartition_name
,
255 sizeof(partition_name
));
256 p_number_ptr
= of_get_property(rootdn
, "ibm,partition-no", NULL
);
258 partition_number
= *p_number_ptr
;
262 static void set_adapter_info(struct ibmvscsi_host_data
*hostdata
)
264 memset(&hostdata
->madapter_info
, 0x00,
265 sizeof(hostdata
->madapter_info
));
267 dev_info(hostdata
->dev
, "SRP_VERSION: %s\n", SRP_VERSION
);
268 strcpy(hostdata
->madapter_info
.srp_version
, SRP_VERSION
);
270 strncpy(hostdata
->madapter_info
.partition_name
, partition_name
,
271 sizeof(hostdata
->madapter_info
.partition_name
));
273 hostdata
->madapter_info
.partition_number
= partition_number
;
275 hostdata
->madapter_info
.mad_version
= 1;
276 hostdata
->madapter_info
.os_type
= 2;
280 * reset_crq_queue: - resets a crq after a failure
281 * @queue: crq_queue to initialize and register
282 * @hostdata: ibmvscsi_host_data of host
285 static int ibmvscsi_reset_crq_queue(struct crq_queue
*queue
,
286 struct ibmvscsi_host_data
*hostdata
)
289 struct vio_dev
*vdev
= to_vio_dev(hostdata
->dev
);
295 rc
= plpar_hcall_norets(H_FREE_CRQ
, vdev
->unit_address
);
296 } while ((rc
== H_BUSY
) || (H_IS_LONG_BUSY(rc
)));
298 /* Clean out the queue */
299 memset(queue
->msgs
, 0x00, PAGE_SIZE
);
302 set_adapter_info(hostdata
);
304 /* And re-open it again */
305 rc
= plpar_hcall_norets(H_REG_CRQ
,
307 queue
->msg_token
, PAGE_SIZE
);
309 /* Adapter is good, but other end is not ready */
310 dev_warn(hostdata
->dev
, "Partner adapter not ready\n");
311 } else if (rc
!= 0) {
312 dev_warn(hostdata
->dev
, "couldn't register crq--rc 0x%x\n", rc
);
318 * initialize_crq_queue: - Initializes and registers CRQ with hypervisor
319 * @queue: crq_queue to initialize and register
320 * @hostdata: ibmvscsi_host_data of host
322 * Allocates a page for messages, maps it for dma, and registers
323 * the crq with the hypervisor.
324 * Returns zero on success.
326 static int ibmvscsi_init_crq_queue(struct crq_queue
*queue
,
327 struct ibmvscsi_host_data
*hostdata
,
332 struct vio_dev
*vdev
= to_vio_dev(hostdata
->dev
);
334 queue
->msgs
= (struct viosrp_crq
*)get_zeroed_page(GFP_KERNEL
);
338 queue
->size
= PAGE_SIZE
/ sizeof(*queue
->msgs
);
340 queue
->msg_token
= dma_map_single(hostdata
->dev
, queue
->msgs
,
341 queue
->size
* sizeof(*queue
->msgs
),
344 if (dma_mapping_error(hostdata
->dev
, queue
->msg_token
))
347 gather_partition_info();
348 set_adapter_info(hostdata
);
350 retrc
= rc
= plpar_hcall_norets(H_REG_CRQ
,
352 queue
->msg_token
, PAGE_SIZE
);
353 if (rc
== H_RESOURCE
)
354 /* maybe kexecing and resource is busy. try a reset */
355 rc
= ibmvscsi_reset_crq_queue(queue
,
359 /* Adapter is good, but other end is not ready */
360 dev_warn(hostdata
->dev
, "Partner adapter not ready\n");
362 } else if (rc
!= 0) {
363 dev_warn(hostdata
->dev
, "Error %d opening adapter\n", rc
);
368 spin_lock_init(&queue
->lock
);
370 tasklet_init(&hostdata
->srp_task
, (void *)ibmvscsi_task
,
371 (unsigned long)hostdata
);
373 if (request_irq(vdev
->irq
,
374 ibmvscsi_handle_event
,
375 0, "ibmvscsi", (void *)hostdata
) != 0) {
376 dev_err(hostdata
->dev
, "couldn't register irq 0x%x\n",
381 rc
= vio_enable_interrupts(vdev
);
383 dev_err(hostdata
->dev
, "Error %d enabling interrupts!!!\n", rc
);
390 tasklet_kill(&hostdata
->srp_task
);
395 rc
= plpar_hcall_norets(H_FREE_CRQ
, vdev
->unit_address
);
396 } while ((rc
== H_BUSY
) || (H_IS_LONG_BUSY(rc
)));
398 dma_unmap_single(hostdata
->dev
,
400 queue
->size
* sizeof(*queue
->msgs
), DMA_BIDIRECTIONAL
);
402 free_page((unsigned long)queue
->msgs
);
408 * reenable_crq_queue: - reenables a crq after
409 * @queue: crq_queue to initialize and register
410 * @hostdata: ibmvscsi_host_data of host
413 static int ibmvscsi_reenable_crq_queue(struct crq_queue
*queue
,
414 struct ibmvscsi_host_data
*hostdata
)
417 struct vio_dev
*vdev
= to_vio_dev(hostdata
->dev
);
419 /* Re-enable the CRQ */
423 rc
= plpar_hcall_norets(H_ENABLE_CRQ
, vdev
->unit_address
);
424 } while ((rc
== H_IN_PROGRESS
) || (rc
== H_BUSY
) || (H_IS_LONG_BUSY(rc
)));
427 dev_err(hostdata
->dev
, "Error %d enabling adapter\n", rc
);
431 /* ------------------------------------------------------------
432 * Routines for the event pool and event structs
435 * initialize_event_pool: - Allocates and initializes the event pool for a host
436 * @pool: event_pool to be initialized
437 * @size: Number of events in pool
438 * @hostdata: ibmvscsi_host_data who owns the event pool
440 * Returns zero on success.
442 static int initialize_event_pool(struct event_pool
*pool
,
443 int size
, struct ibmvscsi_host_data
*hostdata
)
449 pool
->events
= kcalloc(pool
->size
, sizeof(*pool
->events
), GFP_KERNEL
);
454 dma_alloc_coherent(hostdata
->dev
,
455 pool
->size
* sizeof(*pool
->iu_storage
),
457 if (!pool
->iu_storage
) {
462 for (i
= 0; i
< pool
->size
; ++i
) {
463 struct srp_event_struct
*evt
= &pool
->events
[i
];
464 memset(&evt
->crq
, 0x00, sizeof(evt
->crq
));
465 atomic_set(&evt
->free
, 1);
466 evt
->crq
.valid
= 0x80;
467 evt
->crq
.IU_length
= sizeof(*evt
->xfer_iu
);
468 evt
->crq
.IU_data_ptr
= pool
->iu_token
+
469 sizeof(*evt
->xfer_iu
) * i
;
470 evt
->xfer_iu
= pool
->iu_storage
+ i
;
471 evt
->hostdata
= hostdata
;
472 evt
->ext_list
= NULL
;
473 evt
->ext_list_token
= 0;
480 * release_event_pool: - Frees memory of an event pool of a host
481 * @pool: event_pool to be released
482 * @hostdata: ibmvscsi_host_data who owns the even pool
484 * Returns zero on success.
486 static void release_event_pool(struct event_pool
*pool
,
487 struct ibmvscsi_host_data
*hostdata
)
490 for (i
= 0; i
< pool
->size
; ++i
) {
491 if (atomic_read(&pool
->events
[i
].free
) != 1)
493 if (pool
->events
[i
].ext_list
) {
494 dma_free_coherent(hostdata
->dev
,
495 SG_ALL
* sizeof(struct srp_direct_buf
),
496 pool
->events
[i
].ext_list
,
497 pool
->events
[i
].ext_list_token
);
501 dev_warn(hostdata
->dev
, "releasing event pool with %d "
502 "events still in use?\n", in_use
);
504 dma_free_coherent(hostdata
->dev
,
505 pool
->size
* sizeof(*pool
->iu_storage
),
506 pool
->iu_storage
, pool
->iu_token
);
510 * valid_event_struct: - Determines if event is valid.
511 * @pool: event_pool that contains the event
512 * @evt: srp_event_struct to be checked for validity
514 * Returns zero if event is invalid, one otherwise.
516 static int valid_event_struct(struct event_pool
*pool
,
517 struct srp_event_struct
*evt
)
519 int index
= evt
- pool
->events
;
520 if (index
< 0 || index
>= pool
->size
) /* outside of bounds */
522 if (evt
!= pool
->events
+ index
) /* unaligned */
528 * ibmvscsi_free-event_struct: - Changes status of event to "free"
529 * @pool: event_pool that contains the event
530 * @evt: srp_event_struct to be modified
533 static void free_event_struct(struct event_pool
*pool
,
534 struct srp_event_struct
*evt
)
536 if (!valid_event_struct(pool
, evt
)) {
537 dev_err(evt
->hostdata
->dev
, "Freeing invalid event_struct %p "
538 "(not in pool %p)\n", evt
, pool
->events
);
541 if (atomic_inc_return(&evt
->free
) != 1) {
542 dev_err(evt
->hostdata
->dev
, "Freeing event_struct %p "
543 "which is not in use!\n", evt
);
549 * get_evt_struct: - Gets the next free event in pool
550 * @pool: event_pool that contains the events to be searched
552 * Returns the next event in "free" state, and NULL if none are free.
553 * Note that no synchronization is done here, we assume the host_lock
554 * will syncrhonze things.
556 static struct srp_event_struct
*get_event_struct(struct event_pool
*pool
)
559 int poolsize
= pool
->size
;
560 int offset
= pool
->next
;
562 for (i
= 0; i
< poolsize
; i
++) {
563 offset
= (offset
+ 1) % poolsize
;
564 if (!atomic_dec_if_positive(&pool
->events
[offset
].free
)) {
566 return &pool
->events
[offset
];
570 printk(KERN_ERR
"ibmvscsi: found no event struct in pool!\n");
575 * init_event_struct: Initialize fields in an event struct that are always
578 * @done: Routine to call when the event is responded to
579 * @format: SRP or MAD format
580 * @timeout: timeout value set in the CRQ
582 static void init_event_struct(struct srp_event_struct
*evt_struct
,
583 void (*done
) (struct srp_event_struct
*),
587 evt_struct
->cmnd
= NULL
;
588 evt_struct
->cmnd_done
= NULL
;
589 evt_struct
->sync_srp
= NULL
;
590 evt_struct
->crq
.format
= format
;
591 evt_struct
->crq
.timeout
= timeout
;
592 evt_struct
->done
= done
;
595 /* ------------------------------------------------------------
596 * Routines for receiving SCSI responses from the hosting partition
600 * set_srp_direction: Set the fields in the srp related to data
601 * direction and number of buffers based on the direction in
602 * the scsi_cmnd and the number of buffers
604 static void set_srp_direction(struct scsi_cmnd
*cmd
,
605 struct srp_cmd
*srp_cmd
,
614 fmt
= SRP_DATA_DESC_DIRECT
;
616 fmt
= SRP_DATA_DESC_INDIRECT
;
617 numbuf
= min(numbuf
, MAX_INDIRECT_BUFS
);
619 if (cmd
->sc_data_direction
== DMA_TO_DEVICE
)
620 srp_cmd
->data_out_desc_cnt
= numbuf
;
622 srp_cmd
->data_in_desc_cnt
= numbuf
;
625 if (cmd
->sc_data_direction
== DMA_TO_DEVICE
)
626 srp_cmd
->buf_fmt
= fmt
<< 4;
628 srp_cmd
->buf_fmt
= fmt
;
632 * unmap_cmd_data: - Unmap data pointed in srp_cmd based on the format
633 * @cmd: srp_cmd whose additional_data member will be unmapped
634 * @dev: device for which the memory is mapped
637 static void unmap_cmd_data(struct srp_cmd
*cmd
,
638 struct srp_event_struct
*evt_struct
,
643 out_fmt
= cmd
->buf_fmt
>> 4;
644 in_fmt
= cmd
->buf_fmt
& ((1U << 4) - 1);
646 if (out_fmt
== SRP_NO_DATA_DESC
&& in_fmt
== SRP_NO_DATA_DESC
)
649 if (evt_struct
->cmnd
)
650 scsi_dma_unmap(evt_struct
->cmnd
);
653 static int map_sg_list(struct scsi_cmnd
*cmd
, int nseg
,
654 struct srp_direct_buf
*md
)
657 struct scatterlist
*sg
;
658 u64 total_length
= 0;
660 scsi_for_each_sg(cmd
, sg
, nseg
, i
) {
661 struct srp_direct_buf
*descr
= md
+ i
;
662 descr
->va
= sg_dma_address(sg
);
663 descr
->len
= sg_dma_len(sg
);
665 total_length
+= sg_dma_len(sg
);
671 * map_sg_data: - Maps dma for a scatterlist and initializes decriptor fields
672 * @cmd: Scsi_Cmnd with the scatterlist
673 * @srp_cmd: srp_cmd that contains the memory descriptor
674 * @dev: device for which to map dma memory
676 * Called by map_data_for_srp_cmd() when building srp cmd from scsi cmd.
677 * Returns 1 on success.
679 static int map_sg_data(struct scsi_cmnd
*cmd
,
680 struct srp_event_struct
*evt_struct
,
681 struct srp_cmd
*srp_cmd
, struct device
*dev
)
685 u64 total_length
= 0;
686 struct srp_direct_buf
*data
=
687 (struct srp_direct_buf
*) srp_cmd
->add_data
;
688 struct srp_indirect_buf
*indirect
=
689 (struct srp_indirect_buf
*) data
;
691 sg_mapped
= scsi_dma_map(cmd
);
694 else if (sg_mapped
< 0)
697 set_srp_direction(cmd
, srp_cmd
, sg_mapped
);
699 /* special case; we can use a single direct descriptor */
700 if (sg_mapped
== 1) {
701 map_sg_list(cmd
, sg_mapped
, data
);
705 indirect
->table_desc
.va
= 0;
706 indirect
->table_desc
.len
= sg_mapped
* sizeof(struct srp_direct_buf
);
707 indirect
->table_desc
.key
= 0;
709 if (sg_mapped
<= MAX_INDIRECT_BUFS
) {
710 total_length
= map_sg_list(cmd
, sg_mapped
,
711 &indirect
->desc_list
[0]);
712 indirect
->len
= total_length
;
716 /* get indirect table */
717 if (!evt_struct
->ext_list
) {
718 evt_struct
->ext_list
= (struct srp_direct_buf
*)
719 dma_alloc_coherent(dev
,
720 SG_ALL
* sizeof(struct srp_direct_buf
),
721 &evt_struct
->ext_list_token
, 0);
722 if (!evt_struct
->ext_list
) {
723 if (!firmware_has_feature(FW_FEATURE_CMO
))
724 sdev_printk(KERN_ERR
, cmd
->device
,
725 "Can't allocate memory "
726 "for indirect table\n");
732 total_length
= map_sg_list(cmd
, sg_mapped
, evt_struct
->ext_list
);
734 indirect
->len
= total_length
;
735 indirect
->table_desc
.va
= evt_struct
->ext_list_token
;
736 indirect
->table_desc
.len
= sg_mapped
* sizeof(indirect
->desc_list
[0]);
737 memcpy(indirect
->desc_list
, evt_struct
->ext_list
,
738 MAX_INDIRECT_BUFS
* sizeof(struct srp_direct_buf
));
743 * map_data_for_srp_cmd: - Calls functions to map data for srp cmds
744 * @cmd: struct scsi_cmnd with the memory to be mapped
745 * @srp_cmd: srp_cmd that contains the memory descriptor
746 * @dev: dma device for which to map dma memory
748 * Called by scsi_cmd_to_srp_cmd() when converting scsi cmds to srp cmds
749 * Returns 1 on success.
751 static int map_data_for_srp_cmd(struct scsi_cmnd
*cmd
,
752 struct srp_event_struct
*evt_struct
,
753 struct srp_cmd
*srp_cmd
, struct device
*dev
)
755 switch (cmd
->sc_data_direction
) {
756 case DMA_FROM_DEVICE
:
761 case DMA_BIDIRECTIONAL
:
762 sdev_printk(KERN_ERR
, cmd
->device
,
763 "Can't map DMA_BIDIRECTIONAL to read/write\n");
766 sdev_printk(KERN_ERR
, cmd
->device
,
767 "Unknown data direction 0x%02x; can't map!\n",
768 cmd
->sc_data_direction
);
772 return map_sg_data(cmd
, evt_struct
, srp_cmd
, dev
);
776 * purge_requests: Our virtual adapter just shut down. purge any sent requests
777 * @hostdata: the adapter
779 static void purge_requests(struct ibmvscsi_host_data
*hostdata
, int error_code
)
781 struct srp_event_struct
*evt
;
784 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
785 while (!list_empty(&hostdata
->sent
)) {
786 evt
= list_first_entry(&hostdata
->sent
, struct srp_event_struct
, list
);
787 list_del(&evt
->list
);
788 del_timer(&evt
->timer
);
790 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
792 evt
->cmnd
->result
= (error_code
<< 16);
793 unmap_cmd_data(&evt
->iu
.srp
.cmd
, evt
,
796 evt
->cmnd_done(evt
->cmnd
);
797 } else if (evt
->done
)
799 free_event_struct(&evt
->hostdata
->pool
, evt
);
800 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
802 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
806 * ibmvscsi_reset_host - Reset the connection to the server
807 * @hostdata: struct ibmvscsi_host_data to reset
809 static void ibmvscsi_reset_host(struct ibmvscsi_host_data
*hostdata
)
811 scsi_block_requests(hostdata
->host
);
812 atomic_set(&hostdata
->request_limit
, 0);
814 purge_requests(hostdata
, DID_ERROR
);
815 hostdata
->reset_crq
= 1;
816 wake_up(&hostdata
->work_wait_q
);
820 * ibmvscsi_timeout - Internal command timeout handler
821 * @evt_struct: struct srp_event_struct that timed out
823 * Called when an internally generated command times out
825 static void ibmvscsi_timeout(struct srp_event_struct
*evt_struct
)
827 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
829 dev_err(hostdata
->dev
, "Command timed out (%x). Resetting connection\n",
830 evt_struct
->iu
.srp
.cmd
.opcode
);
832 ibmvscsi_reset_host(hostdata
);
836 /* ------------------------------------------------------------
837 * Routines for sending and receiving SRPs
840 * ibmvscsi_send_srp_event: - Transforms event to u64 array and calls send_crq()
841 * @evt_struct: evt_struct to be sent
842 * @hostdata: ibmvscsi_host_data of host
843 * @timeout: timeout in seconds - 0 means do not time command
845 * Returns the value returned from ibmvscsi_send_crq(). (Zero for success)
846 * Note that this routine assumes that host_lock is held for synchronization
848 static int ibmvscsi_send_srp_event(struct srp_event_struct
*evt_struct
,
849 struct ibmvscsi_host_data
*hostdata
,
850 unsigned long timeout
)
852 u64
*crq_as_u64
= (u64
*) &evt_struct
->crq
;
853 int request_status
= 0;
857 /* If we have exhausted our request limit, just fail this request,
858 * unless it is for a reset or abort.
859 * Note that there are rare cases involving driver generated requests
860 * (such as task management requests) that the mid layer may think we
861 * can handle more requests (can_queue) when we actually can't
863 if (evt_struct
->crq
.format
== VIOSRP_SRP_FORMAT
) {
866 atomic_dec_if_positive(&hostdata
->request_limit
);
867 /* If request limit was -1 when we started, it is now even
870 if (request_status
< -1)
872 /* Otherwise, we may have run out of requests. */
873 /* If request limit was 0 when we started the adapter is in the
874 * process of performing a login with the server adapter, or
875 * we may have run out of requests.
877 else if (request_status
== -1 &&
878 evt_struct
->iu
.srp
.login_req
.opcode
!= SRP_LOGIN_REQ
)
880 /* Abort and reset calls should make it through.
881 * Nothing except abort and reset should use the last two
882 * slots unless we had two or less to begin with.
884 else if (request_status
< 2 &&
885 evt_struct
->iu
.srp
.cmd
.opcode
!= SRP_TSK_MGMT
) {
886 /* In the case that we have less than two requests
887 * available, check the server limit as a combination
888 * of the request limit and the number of requests
889 * in-flight (the size of the send list). If the
890 * server limit is greater than 2, return busy so
891 * that the last two are reserved for reset and abort.
893 int server_limit
= request_status
;
894 struct srp_event_struct
*tmp_evt
;
896 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
900 if (server_limit
> 2)
905 /* Copy the IU into the transfer area */
906 *evt_struct
->xfer_iu
= evt_struct
->iu
;
907 evt_struct
->xfer_iu
->srp
.rsp
.tag
= (u64
)evt_struct
;
909 /* Add this to the sent list. We need to do this
910 * before we actually send
911 * in case it comes back REALLY fast
913 list_add_tail(&evt_struct
->list
, &hostdata
->sent
);
915 init_timer(&evt_struct
->timer
);
917 evt_struct
->timer
.data
= (unsigned long) evt_struct
;
918 evt_struct
->timer
.expires
= jiffies
+ (timeout
* HZ
);
919 evt_struct
->timer
.function
= (void (*)(unsigned long))ibmvscsi_timeout
;
920 add_timer(&evt_struct
->timer
);
924 ibmvscsi_send_crq(hostdata
, crq_as_u64
[0], crq_as_u64
[1])) != 0) {
925 list_del(&evt_struct
->list
);
926 del_timer(&evt_struct
->timer
);
928 /* If send_crq returns H_CLOSED, return SCSI_MLQUEUE_HOST_BUSY.
929 * Firmware will send a CRQ with a transport event (0xFF) to
930 * tell this client what has happened to the transport. This
931 * will be handled in ibmvscsi_handle_crq()
933 if (rc
== H_CLOSED
) {
934 dev_warn(hostdata
->dev
, "send warning. "
935 "Receive queue closed, will retry.\n");
938 dev_err(hostdata
->dev
, "send error %d\n", rc
);
940 atomic_inc(&hostdata
->request_limit
);
947 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
, evt_struct
, hostdata
->dev
);
949 free_event_struct(&hostdata
->pool
, evt_struct
);
950 if (srp_req
&& request_status
!= -1)
951 atomic_inc(&hostdata
->request_limit
);
952 return SCSI_MLQUEUE_HOST_BUSY
;
955 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
, evt_struct
, hostdata
->dev
);
957 if (evt_struct
->cmnd
!= NULL
) {
958 evt_struct
->cmnd
->result
= DID_ERROR
<< 16;
959 evt_struct
->cmnd_done(evt_struct
->cmnd
);
960 } else if (evt_struct
->done
)
961 evt_struct
->done(evt_struct
);
963 free_event_struct(&hostdata
->pool
, evt_struct
);
968 * handle_cmd_rsp: - Handle responses from commands
969 * @evt_struct: srp_event_struct to be handled
971 * Used as a callback by when sending scsi cmds.
972 * Gets called by ibmvscsi_handle_crq()
974 static void handle_cmd_rsp(struct srp_event_struct
*evt_struct
)
976 struct srp_rsp
*rsp
= &evt_struct
->xfer_iu
->srp
.rsp
;
977 struct scsi_cmnd
*cmnd
= evt_struct
->cmnd
;
979 if (unlikely(rsp
->opcode
!= SRP_RSP
)) {
980 if (printk_ratelimit())
981 dev_warn(evt_struct
->hostdata
->dev
,
982 "bad SRP RSP type %d\n", rsp
->opcode
);
986 cmnd
->result
|= rsp
->status
;
987 if (((cmnd
->result
>> 1) & 0x1f) == CHECK_CONDITION
)
988 memcpy(cmnd
->sense_buffer
,
990 rsp
->sense_data_len
);
991 unmap_cmd_data(&evt_struct
->iu
.srp
.cmd
,
993 evt_struct
->hostdata
->dev
);
995 if (rsp
->flags
& SRP_RSP_FLAG_DOOVER
)
996 scsi_set_resid(cmnd
, rsp
->data_out_res_cnt
);
997 else if (rsp
->flags
& SRP_RSP_FLAG_DIOVER
)
998 scsi_set_resid(cmnd
, rsp
->data_in_res_cnt
);
1001 if (evt_struct
->cmnd_done
)
1002 evt_struct
->cmnd_done(cmnd
);
1006 * lun_from_dev: - Returns the lun of the scsi device
1007 * @dev: struct scsi_device
1010 static inline u16
lun_from_dev(struct scsi_device
*dev
)
1012 return (0x2 << 14) | (dev
->id
<< 8) | (dev
->channel
<< 5) | dev
->lun
;
1016 * ibmvscsi_queue: - The queuecommand function of the scsi template
1017 * @cmd: struct scsi_cmnd to be executed
1018 * @done: Callback function to be called when cmd is completed
1020 static int ibmvscsi_queuecommand_lck(struct scsi_cmnd
*cmnd
,
1021 void (*done
) (struct scsi_cmnd
*))
1023 struct srp_cmd
*srp_cmd
;
1024 struct srp_event_struct
*evt_struct
;
1025 struct srp_indirect_buf
*indirect
;
1026 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmnd
->device
->host
);
1027 u16 lun
= lun_from_dev(cmnd
->device
);
1030 cmnd
->result
= (DID_OK
<< 16);
1031 evt_struct
= get_event_struct(&hostdata
->pool
);
1033 return SCSI_MLQUEUE_HOST_BUSY
;
1035 /* Set up the actual SRP IU */
1036 srp_cmd
= &evt_struct
->iu
.srp
.cmd
;
1037 memset(srp_cmd
, 0x00, SRP_MAX_IU_LEN
);
1038 srp_cmd
->opcode
= SRP_CMD
;
1039 memcpy(srp_cmd
->cdb
, cmnd
->cmnd
, sizeof(srp_cmd
->cdb
));
1040 srp_cmd
->lun
= ((u64
) lun
) << 48;
1042 if (!map_data_for_srp_cmd(cmnd
, evt_struct
, srp_cmd
, hostdata
->dev
)) {
1043 if (!firmware_has_feature(FW_FEATURE_CMO
))
1044 sdev_printk(KERN_ERR
, cmnd
->device
,
1045 "couldn't convert cmd to srp_cmd\n");
1046 free_event_struct(&hostdata
->pool
, evt_struct
);
1047 return SCSI_MLQUEUE_HOST_BUSY
;
1050 init_event_struct(evt_struct
,
1053 cmnd
->request
->timeout
/HZ
);
1055 evt_struct
->cmnd
= cmnd
;
1056 evt_struct
->cmnd_done
= done
;
1058 /* Fix up dma address of the buffer itself */
1059 indirect
= (struct srp_indirect_buf
*) srp_cmd
->add_data
;
1060 out_fmt
= srp_cmd
->buf_fmt
>> 4;
1061 in_fmt
= srp_cmd
->buf_fmt
& ((1U << 4) - 1);
1062 if ((in_fmt
== SRP_DATA_DESC_INDIRECT
||
1063 out_fmt
== SRP_DATA_DESC_INDIRECT
) &&
1064 indirect
->table_desc
.va
== 0) {
1065 indirect
->table_desc
.va
= evt_struct
->crq
.IU_data_ptr
+
1066 offsetof(struct srp_cmd
, add_data
) +
1067 offsetof(struct srp_indirect_buf
, desc_list
);
1070 return ibmvscsi_send_srp_event(evt_struct
, hostdata
, 0);
1073 static DEF_SCSI_QCMD(ibmvscsi_queuecommand
)
1075 /* ------------------------------------------------------------
1076 * Routines for driver initialization
1080 * map_persist_bufs: - Pre-map persistent data for adapter logins
1081 * @hostdata: ibmvscsi_host_data of host
1083 * Map the capabilities and adapter info DMA buffers to avoid runtime failures.
1084 * Return 1 on error, 0 on success.
1086 static int map_persist_bufs(struct ibmvscsi_host_data
*hostdata
)
1089 hostdata
->caps_addr
= dma_map_single(hostdata
->dev
, &hostdata
->caps
,
1090 sizeof(hostdata
->caps
), DMA_BIDIRECTIONAL
);
1092 if (dma_mapping_error(hostdata
->dev
, hostdata
->caps_addr
)) {
1093 dev_err(hostdata
->dev
, "Unable to map capabilities buffer!\n");
1097 hostdata
->adapter_info_addr
= dma_map_single(hostdata
->dev
,
1098 &hostdata
->madapter_info
,
1099 sizeof(hostdata
->madapter_info
),
1101 if (dma_mapping_error(hostdata
->dev
, hostdata
->adapter_info_addr
)) {
1102 dev_err(hostdata
->dev
, "Unable to map adapter info buffer!\n");
1103 dma_unmap_single(hostdata
->dev
, hostdata
->caps_addr
,
1104 sizeof(hostdata
->caps
), DMA_BIDIRECTIONAL
);
1112 * unmap_persist_bufs: - Unmap persistent data needed for adapter logins
1113 * @hostdata: ibmvscsi_host_data of host
1115 * Unmap the capabilities and adapter info DMA buffers
1117 static void unmap_persist_bufs(struct ibmvscsi_host_data
*hostdata
)
1119 dma_unmap_single(hostdata
->dev
, hostdata
->caps_addr
,
1120 sizeof(hostdata
->caps
), DMA_BIDIRECTIONAL
);
1122 dma_unmap_single(hostdata
->dev
, hostdata
->adapter_info_addr
,
1123 sizeof(hostdata
->madapter_info
), DMA_BIDIRECTIONAL
);
1127 * login_rsp: - Handle response to SRP login request
1128 * @evt_struct: srp_event_struct with the response
1130 * Used as a "done" callback by when sending srp_login. Gets called
1131 * by ibmvscsi_handle_crq()
1133 static void login_rsp(struct srp_event_struct
*evt_struct
)
1135 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
1136 switch (evt_struct
->xfer_iu
->srp
.login_rsp
.opcode
) {
1137 case SRP_LOGIN_RSP
: /* it worked! */
1139 case SRP_LOGIN_REJ
: /* refused! */
1140 dev_info(hostdata
->dev
, "SRP_LOGIN_REJ reason %u\n",
1141 evt_struct
->xfer_iu
->srp
.login_rej
.reason
);
1143 atomic_set(&hostdata
->request_limit
, -1);
1146 dev_err(hostdata
->dev
, "Invalid login response typecode 0x%02x!\n",
1147 evt_struct
->xfer_iu
->srp
.login_rsp
.opcode
);
1149 atomic_set(&hostdata
->request_limit
, -1);
1153 dev_info(hostdata
->dev
, "SRP_LOGIN succeeded\n");
1154 hostdata
->client_migrated
= 0;
1156 /* Now we know what the real request-limit is.
1157 * This value is set rather than added to request_limit because
1158 * request_limit could have been set to -1 by this client.
1160 atomic_set(&hostdata
->request_limit
,
1161 evt_struct
->xfer_iu
->srp
.login_rsp
.req_lim_delta
);
1163 /* If we had any pending I/Os, kick them */
1164 scsi_unblock_requests(hostdata
->host
);
1168 * send_srp_login: - Sends the srp login
1169 * @hostdata: ibmvscsi_host_data of host
1171 * Returns zero if successful.
1173 static int send_srp_login(struct ibmvscsi_host_data
*hostdata
)
1176 unsigned long flags
;
1177 struct srp_login_req
*login
;
1178 struct srp_event_struct
*evt_struct
= get_event_struct(&hostdata
->pool
);
1180 BUG_ON(!evt_struct
);
1181 init_event_struct(evt_struct
, login_rsp
,
1182 VIOSRP_SRP_FORMAT
, login_timeout
);
1184 login
= &evt_struct
->iu
.srp
.login_req
;
1185 memset(login
, 0, sizeof(*login
));
1186 login
->opcode
= SRP_LOGIN_REQ
;
1187 login
->req_it_iu_len
= sizeof(union srp_iu
);
1188 login
->req_buf_fmt
= SRP_BUF_FORMAT_DIRECT
| SRP_BUF_FORMAT_INDIRECT
;
1190 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1191 /* Start out with a request limit of 0, since this is negotiated in
1192 * the login request we are just sending and login requests always
1193 * get sent by the driver regardless of request_limit.
1195 atomic_set(&hostdata
->request_limit
, 0);
1197 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, login_timeout
* 2);
1198 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1199 dev_info(hostdata
->dev
, "sent SRP login\n");
1204 * capabilities_rsp: - Handle response to MAD adapter capabilities request
1205 * @evt_struct: srp_event_struct with the response
1207 * Used as a "done" callback by when sending adapter_info.
1209 static void capabilities_rsp(struct srp_event_struct
*evt_struct
)
1211 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
1213 if (evt_struct
->xfer_iu
->mad
.capabilities
.common
.status
) {
1214 dev_err(hostdata
->dev
, "error 0x%X getting capabilities info\n",
1215 evt_struct
->xfer_iu
->mad
.capabilities
.common
.status
);
1217 if (hostdata
->caps
.migration
.common
.server_support
!= SERVER_SUPPORTS_CAP
)
1218 dev_info(hostdata
->dev
, "Partition migration not supported\n");
1220 if (client_reserve
) {
1221 if (hostdata
->caps
.reserve
.common
.server_support
==
1222 SERVER_SUPPORTS_CAP
)
1223 dev_info(hostdata
->dev
, "Client reserve enabled\n");
1225 dev_info(hostdata
->dev
, "Client reserve not supported\n");
1229 send_srp_login(hostdata
);
1233 * send_mad_capabilities: - Sends the mad capabilities request
1234 * and stores the result so it can be retrieved with
1235 * @hostdata: ibmvscsi_host_data of host
1237 static void send_mad_capabilities(struct ibmvscsi_host_data
*hostdata
)
1239 struct viosrp_capabilities
*req
;
1240 struct srp_event_struct
*evt_struct
;
1241 unsigned long flags
;
1242 struct device_node
*of_node
= hostdata
->dev
->of_node
;
1243 const char *location
;
1245 evt_struct
= get_event_struct(&hostdata
->pool
);
1246 BUG_ON(!evt_struct
);
1248 init_event_struct(evt_struct
, capabilities_rsp
,
1249 VIOSRP_MAD_FORMAT
, info_timeout
);
1251 req
= &evt_struct
->iu
.mad
.capabilities
;
1252 memset(req
, 0, sizeof(*req
));
1254 hostdata
->caps
.flags
= CAP_LIST_SUPPORTED
;
1255 if (hostdata
->client_migrated
)
1256 hostdata
->caps
.flags
|= CLIENT_MIGRATED
;
1258 strncpy(hostdata
->caps
.name
, dev_name(&hostdata
->host
->shost_gendev
),
1259 sizeof(hostdata
->caps
.name
));
1260 hostdata
->caps
.name
[sizeof(hostdata
->caps
.name
) - 1] = '\0';
1262 location
= of_get_property(of_node
, "ibm,loc-code", NULL
);
1263 location
= location
? location
: dev_name(hostdata
->dev
);
1264 strncpy(hostdata
->caps
.loc
, location
, sizeof(hostdata
->caps
.loc
));
1265 hostdata
->caps
.loc
[sizeof(hostdata
->caps
.loc
) - 1] = '\0';
1267 req
->common
.type
= VIOSRP_CAPABILITIES_TYPE
;
1268 req
->buffer
= hostdata
->caps_addr
;
1270 hostdata
->caps
.migration
.common
.cap_type
= MIGRATION_CAPABILITIES
;
1271 hostdata
->caps
.migration
.common
.length
= sizeof(hostdata
->caps
.migration
);
1272 hostdata
->caps
.migration
.common
.server_support
= SERVER_SUPPORTS_CAP
;
1273 hostdata
->caps
.migration
.ecl
= 1;
1275 if (client_reserve
) {
1276 hostdata
->caps
.reserve
.common
.cap_type
= RESERVATION_CAPABILITIES
;
1277 hostdata
->caps
.reserve
.common
.length
= sizeof(hostdata
->caps
.reserve
);
1278 hostdata
->caps
.reserve
.common
.server_support
= SERVER_SUPPORTS_CAP
;
1279 hostdata
->caps
.reserve
.type
= CLIENT_RESERVE_SCSI_2
;
1280 req
->common
.length
= sizeof(hostdata
->caps
);
1282 req
->common
.length
= sizeof(hostdata
->caps
) - sizeof(hostdata
->caps
.reserve
);
1284 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1285 if (ibmvscsi_send_srp_event(evt_struct
, hostdata
, info_timeout
* 2))
1286 dev_err(hostdata
->dev
, "couldn't send CAPABILITIES_REQ!\n");
1287 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1291 * fast_fail_rsp: - Handle response to MAD enable fast fail
1292 * @evt_struct: srp_event_struct with the response
1294 * Used as a "done" callback by when sending enable fast fail. Gets called
1295 * by ibmvscsi_handle_crq()
1297 static void fast_fail_rsp(struct srp_event_struct
*evt_struct
)
1299 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
1300 u8 status
= evt_struct
->xfer_iu
->mad
.fast_fail
.common
.status
;
1302 if (status
== VIOSRP_MAD_NOT_SUPPORTED
)
1303 dev_err(hostdata
->dev
, "fast_fail not supported in server\n");
1304 else if (status
== VIOSRP_MAD_FAILED
)
1305 dev_err(hostdata
->dev
, "fast_fail request failed\n");
1306 else if (status
!= VIOSRP_MAD_SUCCESS
)
1307 dev_err(hostdata
->dev
, "error 0x%X enabling fast_fail\n", status
);
1309 send_mad_capabilities(hostdata
);
1313 * init_host - Start host initialization
1314 * @hostdata: ibmvscsi_host_data of host
1316 * Returns zero if successful.
1318 static int enable_fast_fail(struct ibmvscsi_host_data
*hostdata
)
1321 unsigned long flags
;
1322 struct viosrp_fast_fail
*fast_fail_mad
;
1323 struct srp_event_struct
*evt_struct
;
1326 send_mad_capabilities(hostdata
);
1330 evt_struct
= get_event_struct(&hostdata
->pool
);
1331 BUG_ON(!evt_struct
);
1333 init_event_struct(evt_struct
, fast_fail_rsp
, VIOSRP_MAD_FORMAT
, info_timeout
);
1335 fast_fail_mad
= &evt_struct
->iu
.mad
.fast_fail
;
1336 memset(fast_fail_mad
, 0, sizeof(*fast_fail_mad
));
1337 fast_fail_mad
->common
.type
= VIOSRP_ENABLE_FAST_FAIL
;
1338 fast_fail_mad
->common
.length
= sizeof(*fast_fail_mad
);
1340 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1341 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, info_timeout
* 2);
1342 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1347 * adapter_info_rsp: - Handle response to MAD adapter info request
1348 * @evt_struct: srp_event_struct with the response
1350 * Used as a "done" callback by when sending adapter_info. Gets called
1351 * by ibmvscsi_handle_crq()
1353 static void adapter_info_rsp(struct srp_event_struct
*evt_struct
)
1355 struct ibmvscsi_host_data
*hostdata
= evt_struct
->hostdata
;
1357 if (evt_struct
->xfer_iu
->mad
.adapter_info
.common
.status
) {
1358 dev_err(hostdata
->dev
, "error %d getting adapter info\n",
1359 evt_struct
->xfer_iu
->mad
.adapter_info
.common
.status
);
1361 dev_info(hostdata
->dev
, "host srp version: %s, "
1362 "host partition %s (%d), OS %d, max io %u\n",
1363 hostdata
->madapter_info
.srp_version
,
1364 hostdata
->madapter_info
.partition_name
,
1365 hostdata
->madapter_info
.partition_number
,
1366 hostdata
->madapter_info
.os_type
,
1367 hostdata
->madapter_info
.port_max_txu
[0]);
1369 if (hostdata
->madapter_info
.port_max_txu
[0])
1370 hostdata
->host
->max_sectors
=
1371 hostdata
->madapter_info
.port_max_txu
[0] >> 9;
1373 if (hostdata
->madapter_info
.os_type
== 3 &&
1374 strcmp(hostdata
->madapter_info
.srp_version
, "1.6a") <= 0) {
1375 dev_err(hostdata
->dev
, "host (Ver. %s) doesn't support large transfers\n",
1376 hostdata
->madapter_info
.srp_version
);
1377 dev_err(hostdata
->dev
, "limiting scatterlists to %d\n",
1379 hostdata
->host
->sg_tablesize
= MAX_INDIRECT_BUFS
;
1382 if (hostdata
->madapter_info
.os_type
== 3) {
1383 enable_fast_fail(hostdata
);
1388 send_srp_login(hostdata
);
1392 * send_mad_adapter_info: - Sends the mad adapter info request
1393 * and stores the result so it can be retrieved with
1394 * sysfs. We COULD consider causing a failure if the
1395 * returned SRP version doesn't match ours.
1396 * @hostdata: ibmvscsi_host_data of host
1398 * Returns zero if successful.
1400 static void send_mad_adapter_info(struct ibmvscsi_host_data
*hostdata
)
1402 struct viosrp_adapter_info
*req
;
1403 struct srp_event_struct
*evt_struct
;
1404 unsigned long flags
;
1406 evt_struct
= get_event_struct(&hostdata
->pool
);
1407 BUG_ON(!evt_struct
);
1409 init_event_struct(evt_struct
,
1414 req
= &evt_struct
->iu
.mad
.adapter_info
;
1415 memset(req
, 0x00, sizeof(*req
));
1417 req
->common
.type
= VIOSRP_ADAPTER_INFO_TYPE
;
1418 req
->common
.length
= sizeof(hostdata
->madapter_info
);
1419 req
->buffer
= hostdata
->adapter_info_addr
;
1421 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1422 if (ibmvscsi_send_srp_event(evt_struct
, hostdata
, info_timeout
* 2))
1423 dev_err(hostdata
->dev
, "couldn't send ADAPTER_INFO_REQ!\n");
1424 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1428 * init_adapter: Start virtual adapter initialization sequence
1431 static void init_adapter(struct ibmvscsi_host_data
*hostdata
)
1433 send_mad_adapter_info(hostdata
);
1437 * sync_completion: Signal that a synchronous command has completed
1438 * Note that after returning from this call, the evt_struct is freed.
1439 * the caller waiting on this completion shouldn't touch the evt_struct
1442 static void sync_completion(struct srp_event_struct
*evt_struct
)
1444 /* copy the response back */
1445 if (evt_struct
->sync_srp
)
1446 *evt_struct
->sync_srp
= *evt_struct
->xfer_iu
;
1448 complete(&evt_struct
->comp
);
1452 * ibmvscsi_abort: Abort a command...from scsi host template
1453 * send this over to the server and wait synchronously for the response
1455 static int ibmvscsi_eh_abort_handler(struct scsi_cmnd
*cmd
)
1457 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1458 struct srp_tsk_mgmt
*tsk_mgmt
;
1459 struct srp_event_struct
*evt
;
1460 struct srp_event_struct
*tmp_evt
, *found_evt
;
1461 union viosrp_iu srp_rsp
;
1463 unsigned long flags
;
1464 u16 lun
= lun_from_dev(cmd
->device
);
1465 unsigned long wait_switch
= 0;
1467 /* First, find this command in our sent list so we can figure
1468 * out the correct tag
1470 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1471 wait_switch
= jiffies
+ (init_timeout
* HZ
);
1474 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
1475 if (tmp_evt
->cmnd
== cmd
) {
1476 found_evt
= tmp_evt
;
1482 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1486 evt
= get_event_struct(&hostdata
->pool
);
1488 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1489 sdev_printk(KERN_ERR
, cmd
->device
,
1490 "failed to allocate abort event\n");
1494 init_event_struct(evt
,
1499 tsk_mgmt
= &evt
->iu
.srp
.tsk_mgmt
;
1501 /* Set up an abort SRP command */
1502 memset(tsk_mgmt
, 0x00, sizeof(*tsk_mgmt
));
1503 tsk_mgmt
->opcode
= SRP_TSK_MGMT
;
1504 tsk_mgmt
->lun
= ((u64
) lun
) << 48;
1505 tsk_mgmt
->tsk_mgmt_func
= SRP_TSK_ABORT_TASK
;
1506 tsk_mgmt
->task_tag
= (u64
) found_evt
;
1508 evt
->sync_srp
= &srp_rsp
;
1510 init_completion(&evt
->comp
);
1511 rsp_rc
= ibmvscsi_send_srp_event(evt
, hostdata
, abort_timeout
* 2);
1513 if (rsp_rc
!= SCSI_MLQUEUE_HOST_BUSY
)
1516 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1518 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1519 } while (time_before(jiffies
, wait_switch
));
1521 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1524 sdev_printk(KERN_ERR
, cmd
->device
,
1525 "failed to send abort() event. rc=%d\n", rsp_rc
);
1529 sdev_printk(KERN_INFO
, cmd
->device
,
1530 "aborting command. lun 0x%llx, tag 0x%llx\n",
1531 (((u64
) lun
) << 48), (u64
) found_evt
);
1533 wait_for_completion(&evt
->comp
);
1535 /* make sure we got a good response */
1536 if (unlikely(srp_rsp
.srp
.rsp
.opcode
!= SRP_RSP
)) {
1537 if (printk_ratelimit())
1538 sdev_printk(KERN_WARNING
, cmd
->device
, "abort bad SRP RSP type %d\n",
1539 srp_rsp
.srp
.rsp
.opcode
);
1543 if (srp_rsp
.srp
.rsp
.flags
& SRP_RSP_FLAG_RSPVALID
)
1544 rsp_rc
= *((int *)srp_rsp
.srp
.rsp
.data
);
1546 rsp_rc
= srp_rsp
.srp
.rsp
.status
;
1549 if (printk_ratelimit())
1550 sdev_printk(KERN_WARNING
, cmd
->device
,
1551 "abort code %d for task tag 0x%llx\n",
1552 rsp_rc
, tsk_mgmt
->task_tag
);
1556 /* Because we dropped the spinlock above, it's possible
1557 * The event is no longer in our list. Make sure it didn't
1558 * complete while we were aborting
1560 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1562 list_for_each_entry(tmp_evt
, &hostdata
->sent
, list
) {
1563 if (tmp_evt
->cmnd
== cmd
) {
1564 found_evt
= tmp_evt
;
1569 if (found_evt
== NULL
) {
1570 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1571 sdev_printk(KERN_INFO
, cmd
->device
, "aborted task tag 0x%llx completed\n",
1572 tsk_mgmt
->task_tag
);
1576 sdev_printk(KERN_INFO
, cmd
->device
, "successfully aborted task tag 0x%llx\n",
1577 tsk_mgmt
->task_tag
);
1579 cmd
->result
= (DID_ABORT
<< 16);
1580 list_del(&found_evt
->list
);
1581 unmap_cmd_data(&found_evt
->iu
.srp
.cmd
, found_evt
,
1582 found_evt
->hostdata
->dev
);
1583 free_event_struct(&found_evt
->hostdata
->pool
, found_evt
);
1584 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1585 atomic_inc(&hostdata
->request_limit
);
1590 * ibmvscsi_eh_device_reset_handler: Reset a single LUN...from scsi host
1591 * template send this over to the server and wait synchronously for the
1594 static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd
*cmd
)
1596 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1597 struct srp_tsk_mgmt
*tsk_mgmt
;
1598 struct srp_event_struct
*evt
;
1599 struct srp_event_struct
*tmp_evt
, *pos
;
1600 union viosrp_iu srp_rsp
;
1602 unsigned long flags
;
1603 u16 lun
= lun_from_dev(cmd
->device
);
1604 unsigned long wait_switch
= 0;
1606 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1607 wait_switch
= jiffies
+ (init_timeout
* HZ
);
1609 evt
= get_event_struct(&hostdata
->pool
);
1611 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1612 sdev_printk(KERN_ERR
, cmd
->device
,
1613 "failed to allocate reset event\n");
1617 init_event_struct(evt
,
1622 tsk_mgmt
= &evt
->iu
.srp
.tsk_mgmt
;
1624 /* Set up a lun reset SRP command */
1625 memset(tsk_mgmt
, 0x00, sizeof(*tsk_mgmt
));
1626 tsk_mgmt
->opcode
= SRP_TSK_MGMT
;
1627 tsk_mgmt
->lun
= ((u64
) lun
) << 48;
1628 tsk_mgmt
->tsk_mgmt_func
= SRP_TSK_LUN_RESET
;
1630 evt
->sync_srp
= &srp_rsp
;
1632 init_completion(&evt
->comp
);
1633 rsp_rc
= ibmvscsi_send_srp_event(evt
, hostdata
, reset_timeout
* 2);
1635 if (rsp_rc
!= SCSI_MLQUEUE_HOST_BUSY
)
1638 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1640 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1641 } while (time_before(jiffies
, wait_switch
));
1643 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1646 sdev_printk(KERN_ERR
, cmd
->device
,
1647 "failed to send reset event. rc=%d\n", rsp_rc
);
1651 sdev_printk(KERN_INFO
, cmd
->device
, "resetting device. lun 0x%llx\n",
1652 (((u64
) lun
) << 48));
1654 wait_for_completion(&evt
->comp
);
1656 /* make sure we got a good response */
1657 if (unlikely(srp_rsp
.srp
.rsp
.opcode
!= SRP_RSP
)) {
1658 if (printk_ratelimit())
1659 sdev_printk(KERN_WARNING
, cmd
->device
, "reset bad SRP RSP type %d\n",
1660 srp_rsp
.srp
.rsp
.opcode
);
1664 if (srp_rsp
.srp
.rsp
.flags
& SRP_RSP_FLAG_RSPVALID
)
1665 rsp_rc
= *((int *)srp_rsp
.srp
.rsp
.data
);
1667 rsp_rc
= srp_rsp
.srp
.rsp
.status
;
1670 if (printk_ratelimit())
1671 sdev_printk(KERN_WARNING
, cmd
->device
,
1672 "reset code %d for task tag 0x%llx\n",
1673 rsp_rc
, tsk_mgmt
->task_tag
);
1677 /* We need to find all commands for this LUN that have not yet been
1678 * responded to, and fail them with DID_RESET
1680 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1681 list_for_each_entry_safe(tmp_evt
, pos
, &hostdata
->sent
, list
) {
1682 if ((tmp_evt
->cmnd
) && (tmp_evt
->cmnd
->device
== cmd
->device
)) {
1684 tmp_evt
->cmnd
->result
= (DID_RESET
<< 16);
1685 list_del(&tmp_evt
->list
);
1686 unmap_cmd_data(&tmp_evt
->iu
.srp
.cmd
, tmp_evt
,
1687 tmp_evt
->hostdata
->dev
);
1688 free_event_struct(&tmp_evt
->hostdata
->pool
,
1690 atomic_inc(&hostdata
->request_limit
);
1691 if (tmp_evt
->cmnd_done
)
1692 tmp_evt
->cmnd_done(tmp_evt
->cmnd
);
1693 else if (tmp_evt
->done
)
1694 tmp_evt
->done(tmp_evt
);
1697 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1702 * ibmvscsi_eh_host_reset_handler - Reset the connection to the server
1703 * @cmd: struct scsi_cmnd having problems
1705 static int ibmvscsi_eh_host_reset_handler(struct scsi_cmnd
*cmd
)
1707 unsigned long wait_switch
= 0;
1708 struct ibmvscsi_host_data
*hostdata
= shost_priv(cmd
->device
->host
);
1710 dev_err(hostdata
->dev
, "Resetting connection due to error recovery\n");
1712 ibmvscsi_reset_host(hostdata
);
1714 for (wait_switch
= jiffies
+ (init_timeout
* HZ
);
1715 time_before(jiffies
, wait_switch
) &&
1716 atomic_read(&hostdata
->request_limit
) < 2;) {
1721 if (atomic_read(&hostdata
->request_limit
) <= 0)
1728 * ibmvscsi_handle_crq: - Handles and frees received events in the CRQ
1729 * @crq: Command/Response queue
1730 * @hostdata: ibmvscsi_host_data of host
1733 static void ibmvscsi_handle_crq(struct viosrp_crq
*crq
,
1734 struct ibmvscsi_host_data
*hostdata
)
1737 unsigned long flags
;
1738 struct srp_event_struct
*evt_struct
=
1739 (struct srp_event_struct
*)crq
->IU_data_ptr
;
1740 switch (crq
->valid
) {
1741 case 0xC0: /* initialization */
1742 switch (crq
->format
) {
1743 case 0x01: /* Initialization message */
1744 dev_info(hostdata
->dev
, "partner initialized\n");
1745 /* Send back a response */
1746 rc
= ibmvscsi_send_crq(hostdata
, 0xC002000000000000LL
, 0);
1749 init_adapter(hostdata
);
1751 dev_err(hostdata
->dev
, "Unable to send init rsp. rc=%ld\n", rc
);
1755 case 0x02: /* Initialization response */
1756 dev_info(hostdata
->dev
, "partner initialization complete\n");
1759 init_adapter(hostdata
);
1762 dev_err(hostdata
->dev
, "unknown crq message type: %d\n", crq
->format
);
1765 case 0xFF: /* Hypervisor telling us the connection is closed */
1766 scsi_block_requests(hostdata
->host
);
1767 atomic_set(&hostdata
->request_limit
, 0);
1768 if (crq
->format
== 0x06) {
1769 /* We need to re-setup the interpartition connection */
1770 dev_info(hostdata
->dev
, "Re-enabling adapter!\n");
1771 hostdata
->client_migrated
= 1;
1772 hostdata
->reenable_crq
= 1;
1773 purge_requests(hostdata
, DID_REQUEUE
);
1774 wake_up(&hostdata
->work_wait_q
);
1776 dev_err(hostdata
->dev
, "Virtual adapter failed rc %d!\n",
1778 ibmvscsi_reset_host(hostdata
);
1781 case 0x80: /* real payload */
1784 dev_err(hostdata
->dev
, "got an invalid message type 0x%02x\n",
1789 /* The only kind of payload CRQs we should get are responses to
1790 * things we send. Make sure this response is to something we
1793 if (!valid_event_struct(&hostdata
->pool
, evt_struct
)) {
1794 dev_err(hostdata
->dev
, "returned correlation_token 0x%p is invalid!\n",
1795 (void *)crq
->IU_data_ptr
);
1799 if (atomic_read(&evt_struct
->free
)) {
1800 dev_err(hostdata
->dev
, "received duplicate correlation_token 0x%p!\n",
1801 (void *)crq
->IU_data_ptr
);
1805 if (crq
->format
== VIOSRP_SRP_FORMAT
)
1806 atomic_add(evt_struct
->xfer_iu
->srp
.rsp
.req_lim_delta
,
1807 &hostdata
->request_limit
);
1809 del_timer(&evt_struct
->timer
);
1811 if ((crq
->status
!= VIOSRP_OK
&& crq
->status
!= VIOSRP_OK2
) && evt_struct
->cmnd
)
1812 evt_struct
->cmnd
->result
= DID_ERROR
<< 16;
1813 if (evt_struct
->done
)
1814 evt_struct
->done(evt_struct
);
1816 dev_err(hostdata
->dev
, "returned done() is NULL; not running it!\n");
1819 * Lock the host_lock before messing with these structures, since we
1820 * are running in a task context
1822 spin_lock_irqsave(evt_struct
->hostdata
->host
->host_lock
, flags
);
1823 list_del(&evt_struct
->list
);
1824 free_event_struct(&evt_struct
->hostdata
->pool
, evt_struct
);
1825 spin_unlock_irqrestore(evt_struct
->hostdata
->host
->host_lock
, flags
);
1829 * ibmvscsi_get_host_config: Send the command to the server to get host
1830 * configuration data. The data is opaque to us.
1832 static int ibmvscsi_do_host_config(struct ibmvscsi_host_data
*hostdata
,
1833 unsigned char *buffer
, int length
)
1835 struct viosrp_host_config
*host_config
;
1836 struct srp_event_struct
*evt_struct
;
1837 unsigned long flags
;
1841 evt_struct
= get_event_struct(&hostdata
->pool
);
1843 dev_err(hostdata
->dev
, "couldn't allocate event for HOST_CONFIG!\n");
1847 init_event_struct(evt_struct
,
1852 host_config
= &evt_struct
->iu
.mad
.host_config
;
1854 /* The transport length field is only 16-bit */
1855 length
= min(0xffff, length
);
1857 /* Set up a lun reset SRP command */
1858 memset(host_config
, 0x00, sizeof(*host_config
));
1859 host_config
->common
.type
= VIOSRP_HOST_CONFIG_TYPE
;
1860 host_config
->common
.length
= length
;
1861 host_config
->buffer
= addr
= dma_map_single(hostdata
->dev
, buffer
,
1865 if (dma_mapping_error(hostdata
->dev
, host_config
->buffer
)) {
1866 if (!firmware_has_feature(FW_FEATURE_CMO
))
1867 dev_err(hostdata
->dev
,
1868 "dma_mapping error getting host config\n");
1869 free_event_struct(&hostdata
->pool
, evt_struct
);
1873 init_completion(&evt_struct
->comp
);
1874 spin_lock_irqsave(hostdata
->host
->host_lock
, flags
);
1875 rc
= ibmvscsi_send_srp_event(evt_struct
, hostdata
, info_timeout
* 2);
1876 spin_unlock_irqrestore(hostdata
->host
->host_lock
, flags
);
1878 wait_for_completion(&evt_struct
->comp
);
1879 dma_unmap_single(hostdata
->dev
, addr
, length
, DMA_BIDIRECTIONAL
);
1885 * ibmvscsi_slave_configure: Set the "allow_restart" flag for each disk.
1886 * @sdev: struct scsi_device device to configure
1888 * Enable allow_restart for a device if it is a disk. Adjust the
1889 * queue_depth here also as is required by the documentation for
1890 * struct scsi_host_template.
1892 static int ibmvscsi_slave_configure(struct scsi_device
*sdev
)
1894 struct Scsi_Host
*shost
= sdev
->host
;
1895 unsigned long lock_flags
= 0;
1897 spin_lock_irqsave(shost
->host_lock
, lock_flags
);
1898 if (sdev
->type
== TYPE_DISK
) {
1899 sdev
->allow_restart
= 1;
1900 blk_queue_rq_timeout(sdev
->request_queue
, 120 * HZ
);
1902 spin_unlock_irqrestore(shost
->host_lock
, lock_flags
);
1903 scsi_adjust_queue_depth(sdev
, 0, shost
->cmd_per_lun
);
1908 * ibmvscsi_change_queue_depth - Change the device's queue depth
1909 * @sdev: scsi device struct
1910 * @qdepth: depth to set
1911 * @reason: calling context
1916 static int ibmvscsi_change_queue_depth(struct scsi_device
*sdev
, int qdepth
,
1919 if (reason
!= SCSI_QDEPTH_DEFAULT
)
1922 if (qdepth
> IBMVSCSI_MAX_CMDS_PER_LUN
)
1923 qdepth
= IBMVSCSI_MAX_CMDS_PER_LUN
;
1925 scsi_adjust_queue_depth(sdev
, 0, qdepth
);
1926 return sdev
->queue_depth
;
1929 /* ------------------------------------------------------------
1932 static ssize_t
show_host_vhost_loc(struct device
*dev
,
1933 struct device_attribute
*attr
, char *buf
)
1935 struct Scsi_Host
*shost
= class_to_shost(dev
);
1936 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1939 len
= snprintf(buf
, sizeof(hostdata
->caps
.loc
), "%s\n",
1940 hostdata
->caps
.loc
);
1944 static struct device_attribute ibmvscsi_host_vhost_loc
= {
1946 .name
= "vhost_loc",
1949 .show
= show_host_vhost_loc
,
1952 static ssize_t
show_host_vhost_name(struct device
*dev
,
1953 struct device_attribute
*attr
, char *buf
)
1955 struct Scsi_Host
*shost
= class_to_shost(dev
);
1956 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1959 len
= snprintf(buf
, sizeof(hostdata
->caps
.name
), "%s\n",
1960 hostdata
->caps
.name
);
1964 static struct device_attribute ibmvscsi_host_vhost_name
= {
1966 .name
= "vhost_name",
1969 .show
= show_host_vhost_name
,
1972 static ssize_t
show_host_srp_version(struct device
*dev
,
1973 struct device_attribute
*attr
, char *buf
)
1975 struct Scsi_Host
*shost
= class_to_shost(dev
);
1976 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
1979 len
= snprintf(buf
, PAGE_SIZE
, "%s\n",
1980 hostdata
->madapter_info
.srp_version
);
1984 static struct device_attribute ibmvscsi_host_srp_version
= {
1986 .name
= "srp_version",
1989 .show
= show_host_srp_version
,
1992 static ssize_t
show_host_partition_name(struct device
*dev
,
1993 struct device_attribute
*attr
,
1996 struct Scsi_Host
*shost
= class_to_shost(dev
);
1997 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
2000 len
= snprintf(buf
, PAGE_SIZE
, "%s\n",
2001 hostdata
->madapter_info
.partition_name
);
2005 static struct device_attribute ibmvscsi_host_partition_name
= {
2007 .name
= "partition_name",
2010 .show
= show_host_partition_name
,
2013 static ssize_t
show_host_partition_number(struct device
*dev
,
2014 struct device_attribute
*attr
,
2017 struct Scsi_Host
*shost
= class_to_shost(dev
);
2018 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
2021 len
= snprintf(buf
, PAGE_SIZE
, "%d\n",
2022 hostdata
->madapter_info
.partition_number
);
2026 static struct device_attribute ibmvscsi_host_partition_number
= {
2028 .name
= "partition_number",
2031 .show
= show_host_partition_number
,
2034 static ssize_t
show_host_mad_version(struct device
*dev
,
2035 struct device_attribute
*attr
, char *buf
)
2037 struct Scsi_Host
*shost
= class_to_shost(dev
);
2038 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
2041 len
= snprintf(buf
, PAGE_SIZE
, "%d\n",
2042 hostdata
->madapter_info
.mad_version
);
2046 static struct device_attribute ibmvscsi_host_mad_version
= {
2048 .name
= "mad_version",
2051 .show
= show_host_mad_version
,
2054 static ssize_t
show_host_os_type(struct device
*dev
,
2055 struct device_attribute
*attr
, char *buf
)
2057 struct Scsi_Host
*shost
= class_to_shost(dev
);
2058 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
2061 len
= snprintf(buf
, PAGE_SIZE
, "%d\n", hostdata
->madapter_info
.os_type
);
2065 static struct device_attribute ibmvscsi_host_os_type
= {
2070 .show
= show_host_os_type
,
2073 static ssize_t
show_host_config(struct device
*dev
,
2074 struct device_attribute
*attr
, char *buf
)
2076 struct Scsi_Host
*shost
= class_to_shost(dev
);
2077 struct ibmvscsi_host_data
*hostdata
= shost_priv(shost
);
2079 /* returns null-terminated host config data */
2080 if (ibmvscsi_do_host_config(hostdata
, buf
, PAGE_SIZE
) == 0)
2086 static struct device_attribute ibmvscsi_host_config
= {
2091 .show
= show_host_config
,
2094 static struct device_attribute
*ibmvscsi_attrs
[] = {
2095 &ibmvscsi_host_vhost_loc
,
2096 &ibmvscsi_host_vhost_name
,
2097 &ibmvscsi_host_srp_version
,
2098 &ibmvscsi_host_partition_name
,
2099 &ibmvscsi_host_partition_number
,
2100 &ibmvscsi_host_mad_version
,
2101 &ibmvscsi_host_os_type
,
2102 &ibmvscsi_host_config
,
2106 /* ------------------------------------------------------------
2107 * SCSI driver registration
2109 static struct scsi_host_template driver_template
= {
2110 .module
= THIS_MODULE
,
2111 .name
= "IBM POWER Virtual SCSI Adapter " IBMVSCSI_VERSION
,
2112 .proc_name
= "ibmvscsi",
2113 .queuecommand
= ibmvscsi_queuecommand
,
2114 .eh_abort_handler
= ibmvscsi_eh_abort_handler
,
2115 .eh_device_reset_handler
= ibmvscsi_eh_device_reset_handler
,
2116 .eh_host_reset_handler
= ibmvscsi_eh_host_reset_handler
,
2117 .slave_configure
= ibmvscsi_slave_configure
,
2118 .change_queue_depth
= ibmvscsi_change_queue_depth
,
2119 .cmd_per_lun
= IBMVSCSI_CMDS_PER_LUN_DEFAULT
,
2120 .can_queue
= IBMVSCSI_MAX_REQUESTS_DEFAULT
,
2122 .sg_tablesize
= SG_ALL
,
2123 .use_clustering
= ENABLE_CLUSTERING
,
2124 .shost_attrs
= ibmvscsi_attrs
,
2128 * ibmvscsi_get_desired_dma - Calculate IO memory desired by the driver
2130 * @vdev: struct vio_dev for the device whose desired IO mem is to be returned
2133 * Number of bytes of IO data the driver will need to perform well.
2135 static unsigned long ibmvscsi_get_desired_dma(struct vio_dev
*vdev
)
2137 /* iu_storage data allocated in initialize_event_pool */
2138 unsigned long desired_io
= max_events
* sizeof(union viosrp_iu
);
2140 /* add io space for sg data */
2141 desired_io
+= (IBMVSCSI_MAX_SECTORS_DEFAULT
* 512 *
2142 IBMVSCSI_CMDS_PER_LUN_DEFAULT
);
2147 static void ibmvscsi_do_work(struct ibmvscsi_host_data
*hostdata
)
2150 char *action
= "reset";
2152 if (hostdata
->reset_crq
) {
2154 hostdata
->reset_crq
= 0;
2156 rc
= ibmvscsi_reset_crq_queue(&hostdata
->queue
, hostdata
);
2158 rc
= ibmvscsi_send_crq(hostdata
, 0xC001000000000000LL
, 0);
2159 vio_enable_interrupts(to_vio_dev(hostdata
->dev
));
2160 } else if (hostdata
->reenable_crq
) {
2163 rc
= ibmvscsi_reenable_crq_queue(&hostdata
->queue
, hostdata
);
2164 hostdata
->reenable_crq
= 0;
2166 rc
= ibmvscsi_send_crq(hostdata
, 0xC001000000000000LL
, 0);
2171 atomic_set(&hostdata
->request_limit
, -1);
2172 dev_err(hostdata
->dev
, "error after %s\n", action
);
2175 scsi_unblock_requests(hostdata
->host
);
2178 static int ibmvscsi_work_to_do(struct ibmvscsi_host_data
*hostdata
)
2180 if (kthread_should_stop())
2182 else if (hostdata
->reset_crq
) {
2185 } else if (hostdata
->reenable_crq
) {
2193 static int ibmvscsi_work(void *data
)
2195 struct ibmvscsi_host_data
*hostdata
= data
;
2198 set_user_nice(current
, -20);
2201 rc
= wait_event_interruptible(hostdata
->work_wait_q
,
2202 ibmvscsi_work_to_do(hostdata
));
2206 if (kthread_should_stop())
2209 ibmvscsi_do_work(hostdata
);
2216 * Called by bus code for each adapter
2218 static int ibmvscsi_probe(struct vio_dev
*vdev
, const struct vio_device_id
*id
)
2220 struct ibmvscsi_host_data
*hostdata
;
2221 struct Scsi_Host
*host
;
2222 struct device
*dev
= &vdev
->dev
;
2223 struct srp_rport_identifiers ids
;
2224 struct srp_rport
*rport
;
2225 unsigned long wait_switch
= 0;
2228 dev_set_drvdata(&vdev
->dev
, NULL
);
2230 host
= scsi_host_alloc(&driver_template
, sizeof(*hostdata
));
2232 dev_err(&vdev
->dev
, "couldn't allocate host data\n");
2233 goto scsi_host_alloc_failed
;
2236 host
->transportt
= ibmvscsi_transport_template
;
2237 hostdata
= shost_priv(host
);
2238 memset(hostdata
, 0x00, sizeof(*hostdata
));
2239 INIT_LIST_HEAD(&hostdata
->sent
);
2240 init_waitqueue_head(&hostdata
->work_wait_q
);
2241 hostdata
->host
= host
;
2242 hostdata
->dev
= dev
;
2243 atomic_set(&hostdata
->request_limit
, -1);
2244 hostdata
->host
->max_sectors
= IBMVSCSI_MAX_SECTORS_DEFAULT
;
2246 if (map_persist_bufs(hostdata
)) {
2247 dev_err(&vdev
->dev
, "couldn't map persistent buffers\n");
2248 goto persist_bufs_failed
;
2251 hostdata
->work_thread
= kthread_run(ibmvscsi_work
, hostdata
, "%s_%d",
2252 "ibmvscsi", host
->host_no
);
2254 if (IS_ERR(hostdata
->work_thread
)) {
2255 dev_err(&vdev
->dev
, "couldn't initialize kthread. rc=%ld\n",
2256 PTR_ERR(hostdata
->work_thread
));
2257 goto init_crq_failed
;
2260 rc
= ibmvscsi_init_crq_queue(&hostdata
->queue
, hostdata
, max_events
);
2261 if (rc
!= 0 && rc
!= H_RESOURCE
) {
2262 dev_err(&vdev
->dev
, "couldn't initialize crq. rc=%d\n", rc
);
2265 if (initialize_event_pool(&hostdata
->pool
, max_events
, hostdata
) != 0) {
2266 dev_err(&vdev
->dev
, "couldn't initialize event pool\n");
2267 goto init_pool_failed
;
2271 host
->max_id
= max_id
;
2272 host
->max_channel
= max_channel
;
2273 host
->max_cmd_len
= 16;
2275 if (scsi_add_host(hostdata
->host
, hostdata
->dev
))
2276 goto add_host_failed
;
2278 /* we don't have a proper target_port_id so let's use the fake one */
2279 memcpy(ids
.port_id
, hostdata
->madapter_info
.partition_name
,
2280 sizeof(ids
.port_id
));
2281 ids
.roles
= SRP_RPORT_ROLE_TARGET
;
2282 rport
= srp_rport_add(host
, &ids
);
2284 goto add_srp_port_failed
;
2286 /* Try to send an initialization message. Note that this is allowed
2287 * to fail if the other end is not acive. In that case we don't
2290 if (ibmvscsi_send_crq(hostdata
, 0xC001000000000000LL
, 0) == 0
2291 || rc
== H_RESOURCE
) {
2293 * Wait around max init_timeout secs for the adapter to finish
2294 * initializing. When we are done initializing, we will have a
2295 * valid request_limit. We don't want Linux scanning before
2298 for (wait_switch
= jiffies
+ (init_timeout
* HZ
);
2299 time_before(jiffies
, wait_switch
) &&
2300 atomic_read(&hostdata
->request_limit
) < 2;) {
2305 /* if we now have a valid request_limit, initiate a scan */
2306 if (atomic_read(&hostdata
->request_limit
) > 0)
2307 scsi_scan_host(host
);
2310 dev_set_drvdata(&vdev
->dev
, hostdata
);
2313 add_srp_port_failed
:
2314 scsi_remove_host(hostdata
->host
);
2316 release_event_pool(&hostdata
->pool
, hostdata
);
2318 ibmvscsi_release_crq_queue(&hostdata
->queue
, hostdata
, max_events
);
2320 kthread_stop(hostdata
->work_thread
);
2322 unmap_persist_bufs(hostdata
);
2323 persist_bufs_failed
:
2324 scsi_host_put(host
);
2325 scsi_host_alloc_failed
:
2329 static int ibmvscsi_remove(struct vio_dev
*vdev
)
2331 struct ibmvscsi_host_data
*hostdata
= dev_get_drvdata(&vdev
->dev
);
2332 unmap_persist_bufs(hostdata
);
2333 release_event_pool(&hostdata
->pool
, hostdata
);
2334 ibmvscsi_release_crq_queue(&hostdata
->queue
, hostdata
,
2337 kthread_stop(hostdata
->work_thread
);
2338 srp_remove_host(hostdata
->host
);
2339 scsi_remove_host(hostdata
->host
);
2340 scsi_host_put(hostdata
->host
);
2346 * ibmvscsi_resume: Resume from suspend
2347 * @dev: device struct
2349 * We may have lost an interrupt across suspend/resume, so kick the
2352 static int ibmvscsi_resume(struct device
*dev
)
2354 struct ibmvscsi_host_data
*hostdata
= dev_get_drvdata(dev
);
2355 vio_disable_interrupts(to_vio_dev(hostdata
->dev
));
2356 tasklet_schedule(&hostdata
->srp_task
);
2362 * ibmvscsi_device_table: Used by vio.c to match devices in the device tree we
2365 static struct vio_device_id ibmvscsi_device_table
[] = {
2366 {"vscsi", "IBM,v-scsi"},
2369 MODULE_DEVICE_TABLE(vio
, ibmvscsi_device_table
);
2371 static struct dev_pm_ops ibmvscsi_pm_ops
= {
2372 .resume
= ibmvscsi_resume
2375 static struct vio_driver ibmvscsi_driver
= {
2376 .id_table
= ibmvscsi_device_table
,
2377 .probe
= ibmvscsi_probe
,
2378 .remove
= ibmvscsi_remove
,
2379 .get_desired_dma
= ibmvscsi_get_desired_dma
,
2381 .pm
= &ibmvscsi_pm_ops
,
2384 static struct srp_function_template ibmvscsi_transport_functions
= {
2387 int __init
ibmvscsi_module_init(void)
2391 /* Ensure we have two requests to do error recovery */
2392 driver_template
.can_queue
= max_requests
;
2393 max_events
= max_requests
+ 2;
2395 if (!firmware_has_feature(FW_FEATURE_VIO
))
2398 ibmvscsi_transport_template
=
2399 srp_attach_transport(&ibmvscsi_transport_functions
);
2400 if (!ibmvscsi_transport_template
)
2403 ret
= vio_register_driver(&ibmvscsi_driver
);
2405 srp_release_transport(ibmvscsi_transport_template
);
2409 void __exit
ibmvscsi_module_exit(void)
2411 vio_unregister_driver(&ibmvscsi_driver
);
2412 srp_release_transport(ibmvscsi_transport_template
);
2415 module_init(ibmvscsi_module_init
);
2416 module_exit(ibmvscsi_module_exit
);