2 * TI DaVinci EVM board support
4 * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
6 * 2007 (c) MontaVista Software, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/dma-mapping.h>
14 #include <linux/platform_device.h>
15 #include <linux/gpio.h>
16 #include <linux/i2c.h>
17 #include <linux/i2c/pcf857x.h>
18 #include <linux/i2c/at24.h>
19 #include <linux/mtd/mtd.h>
20 #include <linux/mtd/nand.h>
21 #include <linux/mtd/partitions.h>
22 #include <linux/mtd/physmap.h>
23 #include <linux/phy.h>
24 #include <linux/clk.h>
25 #include <linux/videodev2.h>
26 #include <linux/export.h>
28 #include <media/tvp514x.h>
30 #include <asm/mach-types.h>
31 #include <asm/mach/arch.h>
33 #include <mach/common.h>
35 #include <mach/serial.h>
37 #include <mach/nand.h>
40 #include <mach/aemif.h>
44 #define DM644X_EVM_PHY_ID "0:01"
45 #define LXT971_PHY_ID (0x001378e2)
46 #define LXT971_PHY_MASK (0xfffffff0)
48 static struct mtd_partition davinci_evm_norflash_partitions
[] = {
49 /* bootloader (UBL, U-Boot, etc) in first 5 sectors */
54 .mask_flags
= MTD_WRITEABLE
, /* force read-only */
56 /* bootloader params in the next 1 sectors */
59 .offset
= MTDPART_OFS_APPEND
,
66 .offset
= MTDPART_OFS_APPEND
,
73 .offset
= MTDPART_OFS_APPEND
,
74 .size
= MTDPART_SIZ_FULL
,
79 static struct physmap_flash_data davinci_evm_norflash_data
= {
81 .parts
= davinci_evm_norflash_partitions
,
82 .nr_parts
= ARRAY_SIZE(davinci_evm_norflash_partitions
),
85 /* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
86 * limits addresses to 16M, so using addresses past 16M will wrap */
87 static struct resource davinci_evm_norflash_resource
= {
88 .start
= DM644X_ASYNC_EMIF_DATA_CE0_BASE
,
89 .end
= DM644X_ASYNC_EMIF_DATA_CE0_BASE
+ SZ_16M
- 1,
90 .flags
= IORESOURCE_MEM
,
93 static struct platform_device davinci_evm_norflash_device
= {
94 .name
= "physmap-flash",
97 .platform_data
= &davinci_evm_norflash_data
,
100 .resource
= &davinci_evm_norflash_resource
,
103 /* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
104 * It may used instead of the (default) NOR chip to boot, using TI's
105 * tools to install the secondary boot loader (UBL) and U-Boot.
107 static struct mtd_partition davinci_evm_nandflash_partition
[] = {
108 /* Bootloader layout depends on whose u-boot is installed, but we
109 * can hide all the details.
110 * - block 0 for u-boot environment ... in mainline u-boot
111 * - block 1 for UBL (plus up to four backup copies in blocks 2..5)
112 * - blocks 6...? for u-boot
113 * - blocks 16..23 for u-boot environment ... in TI's u-boot
116 .name
= "bootloader",
118 .size
= SZ_256K
+ SZ_128K
,
119 .mask_flags
= MTD_WRITEABLE
, /* force read-only */
124 .offset
= MTDPART_OFS_APPEND
,
128 /* File system (older GIT kernels started this on the 5MB mark) */
130 .name
= "filesystem",
131 .offset
= MTDPART_OFS_APPEND
,
132 .size
= MTDPART_SIZ_FULL
,
135 /* A few blocks at end hold a flash BBT ... created by TI's CCS
136 * using flashwriter_nand.out, but ignored by TI's versions of
137 * Linux and u-boot. We boot faster by using them.
141 static struct davinci_aemif_timing davinci_evm_nandflash_timing
= {
151 static struct davinci_nand_pdata davinci_evm_nandflash_data
= {
152 .parts
= davinci_evm_nandflash_partition
,
153 .nr_parts
= ARRAY_SIZE(davinci_evm_nandflash_partition
),
154 .ecc_mode
= NAND_ECC_HW
,
155 .bbt_options
= NAND_BBT_USE_FLASH
,
156 .timing
= &davinci_evm_nandflash_timing
,
159 static struct resource davinci_evm_nandflash_resource
[] = {
161 .start
= DM644X_ASYNC_EMIF_DATA_CE0_BASE
,
162 .end
= DM644X_ASYNC_EMIF_DATA_CE0_BASE
+ SZ_16M
- 1,
163 .flags
= IORESOURCE_MEM
,
165 .start
= DM644X_ASYNC_EMIF_CONTROL_BASE
,
166 .end
= DM644X_ASYNC_EMIF_CONTROL_BASE
+ SZ_4K
- 1,
167 .flags
= IORESOURCE_MEM
,
171 static struct platform_device davinci_evm_nandflash_device
= {
172 .name
= "davinci_nand",
175 .platform_data
= &davinci_evm_nandflash_data
,
177 .num_resources
= ARRAY_SIZE(davinci_evm_nandflash_resource
),
178 .resource
= davinci_evm_nandflash_resource
,
181 static u64 davinci_fb_dma_mask
= DMA_BIT_MASK(32);
183 static struct platform_device davinci_fb_device
= {
187 .dma_mask
= &davinci_fb_dma_mask
,
188 .coherent_dma_mask
= DMA_BIT_MASK(32),
193 static struct tvp514x_platform_data tvp5146_pdata
= {
199 #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
200 /* Inputs available at the TVP5146 */
201 static struct v4l2_input tvp5146_inputs
[] = {
205 .type
= V4L2_INPUT_TYPE_CAMERA
,
206 .std
= TVP514X_STD_ALL
,
211 .type
= V4L2_INPUT_TYPE_CAMERA
,
212 .std
= TVP514X_STD_ALL
,
217 * this is the route info for connecting each input to decoder
218 * ouput that goes to vpfe. There is a one to one correspondence
219 * with tvp5146_inputs
221 static struct vpfe_route tvp5146_routes
[] = {
223 .input
= INPUT_CVBS_VI2B
,
224 .output
= OUTPUT_10BIT_422_EMBEDDED_SYNC
,
227 .input
= INPUT_SVIDEO_VI2C_VI1C
,
228 .output
= OUTPUT_10BIT_422_EMBEDDED_SYNC
,
232 static struct vpfe_subdev_info vpfe_sub_devs
[] = {
236 .num_inputs
= ARRAY_SIZE(tvp5146_inputs
),
237 .inputs
= tvp5146_inputs
,
238 .routes
= tvp5146_routes
,
241 .if_type
= VPFE_BT656
,
242 .hdpol
= VPFE_PINPOL_POSITIVE
,
243 .vdpol
= VPFE_PINPOL_POSITIVE
,
246 I2C_BOARD_INFO("tvp5146", 0x5d),
247 .platform_data
= &tvp5146_pdata
,
252 static struct vpfe_config vpfe_cfg
= {
253 .num_subdevs
= ARRAY_SIZE(vpfe_sub_devs
),
255 .sub_devs
= vpfe_sub_devs
,
256 .card_name
= "DM6446 EVM",
257 .ccdc
= "DM6446 CCDC",
260 static struct platform_device rtc_dev
= {
261 .name
= "rtc_davinci_evm",
265 static struct snd_platform_data dm644x_evm_snd_data
;
267 /*----------------------------------------------------------------------*/
273 #define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8))
278 static struct gpio_led evm_leds
[] = {
279 { .name
= "DS8", .active_low
= 1,
280 .default_trigger
= "heartbeat", },
281 { .name
= "DS7", .active_low
= 1, },
282 { .name
= "DS6", .active_low
= 1, },
283 { .name
= "DS5", .active_low
= 1, },
284 { .name
= "DS4", .active_low
= 1, },
285 { .name
= "DS3", .active_low
= 1, },
286 { .name
= "DS2", .active_low
= 1,
287 .default_trigger
= "mmc0", },
288 { .name
= "DS1", .active_low
= 1,
289 .default_trigger
= "ide-disk", },
292 static const struct gpio_led_platform_data evm_led_data
= {
293 .num_leds
= ARRAY_SIZE(evm_leds
),
297 static struct platform_device
*evm_led_dev
;
300 evm_led_setup(struct i2c_client
*client
, int gpio
, unsigned ngpio
, void *c
)
302 struct gpio_led
*leds
= evm_leds
;
310 /* what an extremely annoying way to be forced to handle
311 * device unregistration ...
313 evm_led_dev
= platform_device_alloc("leds-gpio", 0);
314 platform_device_add_data(evm_led_dev
,
315 &evm_led_data
, sizeof evm_led_data
);
317 evm_led_dev
->dev
.parent
= &client
->dev
;
318 status
= platform_device_add(evm_led_dev
);
320 platform_device_put(evm_led_dev
);
327 evm_led_teardown(struct i2c_client
*client
, int gpio
, unsigned ngpio
, void *c
)
330 platform_device_unregister(evm_led_dev
);
336 static struct pcf857x_platform_data pcf_data_u2
= {
337 .gpio_base
= PCF_Uxx_BASE(0),
338 .setup
= evm_led_setup
,
339 .teardown
= evm_led_teardown
,
343 /* U18 - A/V clock generator and user switch */
348 sw_show(struct device
*d
, struct device_attribute
*a
, char *buf
)
350 char *s
= gpio_get_value_cansleep(sw_gpio
) ? "on\n" : "off\n";
356 static DEVICE_ATTR(user_sw
, S_IRUGO
, sw_show
, NULL
);
359 evm_u18_setup(struct i2c_client
*client
, int gpio
, unsigned ngpio
, void *c
)
363 /* export dip switch option */
365 status
= gpio_request(sw_gpio
, "user_sw");
367 status
= gpio_direction_input(sw_gpio
);
369 status
= device_create_file(&client
->dev
, &dev_attr_user_sw
);
375 /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
376 gpio_request(gpio
+ 3, "pll_fs2");
377 gpio_direction_output(gpio
+ 3, 0);
379 gpio_request(gpio
+ 2, "pll_fs1");
380 gpio_direction_output(gpio
+ 2, 0);
382 gpio_request(gpio
+ 1, "pll_sr");
383 gpio_direction_output(gpio
+ 1, 0);
389 evm_u18_teardown(struct i2c_client
*client
, int gpio
, unsigned ngpio
, void *c
)
396 device_remove_file(&client
->dev
, &dev_attr_user_sw
);
402 static struct pcf857x_platform_data pcf_data_u18
= {
403 .gpio_base
= PCF_Uxx_BASE(1),
404 .n_latch
= (1 << 3) | (1 << 2) | (1 << 1),
405 .setup
= evm_u18_setup
,
406 .teardown
= evm_u18_teardown
,
410 /* U35 - various I/O signals used to manage USB, CF, ATA, etc */
413 evm_u35_setup(struct i2c_client
*client
, int gpio
, unsigned ngpio
, void *c
)
415 /* p0 = nDRV_VBUS (initial: don't supply it) */
416 gpio_request(gpio
+ 0, "nDRV_VBUS");
417 gpio_direction_output(gpio
+ 0, 1);
420 gpio_request(gpio
+ 1, "VDDIMX_EN");
421 gpio_direction_output(gpio
+ 1, 1);
424 gpio_request(gpio
+ 2, "VLYNQ_EN");
425 gpio_direction_output(gpio
+ 2, 1);
427 /* p3 = n3V3_CF_RESET (initial: stay in reset) */
428 gpio_request(gpio
+ 3, "nCF_RESET");
429 gpio_direction_output(gpio
+ 3, 0);
433 /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
434 gpio_request(gpio
+ 5, "WLAN_RESET");
435 gpio_direction_output(gpio
+ 5, 1);
437 /* p6 = nATA_SEL (initial: select) */
438 gpio_request(gpio
+ 6, "nATA_SEL");
439 gpio_direction_output(gpio
+ 6, 0);
441 /* p7 = nCF_SEL (initial: deselect) */
442 gpio_request(gpio
+ 7, "nCF_SEL");
443 gpio_direction_output(gpio
+ 7, 1);
449 evm_u35_teardown(struct i2c_client
*client
, int gpio
, unsigned ngpio
, void *c
)
461 static struct pcf857x_platform_data pcf_data_u35
= {
462 .gpio_base
= PCF_Uxx_BASE(2),
463 .setup
= evm_u35_setup
,
464 .teardown
= evm_u35_teardown
,
467 /*----------------------------------------------------------------------*/
469 /* Most of this EEPROM is unused, but U-Boot uses some data:
470 * - 0x7f00, 6 bytes Ethernet Address
471 * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
472 * - ... newer boards may have more
475 static struct at24_platform_data eeprom_info
= {
476 .byte_len
= (256*1024) / 8,
478 .flags
= AT24_FLAG_ADDR16
,
479 .setup
= davinci_get_mac_addr
,
480 .context
= (void *)0x7f00,
484 * MSP430 supports RTC, card detection, input from IR remote, and
485 * a bit more. It triggers interrupts on GPIO(7) from pressing
486 * buttons on the IR remote, and for card detect switches.
488 static struct i2c_client
*dm6446evm_msp
;
490 static int dm6446evm_msp_probe(struct i2c_client
*client
,
491 const struct i2c_device_id
*id
)
493 dm6446evm_msp
= client
;
497 static int dm6446evm_msp_remove(struct i2c_client
*client
)
499 dm6446evm_msp
= NULL
;
503 static const struct i2c_device_id dm6446evm_msp_ids
[] = {
504 { "dm6446evm_msp", 0, },
505 { /* end of list */ },
508 static struct i2c_driver dm6446evm_msp_driver
= {
509 .driver
.name
= "dm6446evm_msp",
510 .id_table
= dm6446evm_msp_ids
,
511 .probe
= dm6446evm_msp_probe
,
512 .remove
= dm6446evm_msp_remove
,
515 static int dm6444evm_msp430_get_pins(void)
517 static const char txbuf
[2] = { 2, 4, };
519 struct i2c_msg msg
[2] = {
521 .addr
= dm6446evm_msp
->addr
,
524 .buf
= (void __force
*)txbuf
,
527 .addr
= dm6446evm_msp
->addr
,
538 /* Command 4 == get input state, returns port 2 and port3 data
539 * S Addr W [A] len=2 [A] cmd=4 [A]
540 * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
542 status
= i2c_transfer(dm6446evm_msp
->adapter
, msg
, 2);
546 dev_dbg(&dm6446evm_msp
->dev
,
547 "PINS: %02x %02x %02x %02x\n",
548 buf
[0], buf
[1], buf
[2], buf
[3]);
550 return (buf
[3] << 8) | buf
[2];
553 static int dm6444evm_mmc_get_cd(int module
)
555 int status
= dm6444evm_msp430_get_pins();
557 return (status
< 0) ? status
: !(status
& BIT(1));
560 static int dm6444evm_mmc_get_ro(int module
)
562 int status
= dm6444evm_msp430_get_pins();
564 return (status
< 0) ? status
: status
& BIT(6 + 8);
567 static struct davinci_mmc_config dm6446evm_mmc_config
= {
568 .get_cd
= dm6444evm_mmc_get_cd
,
569 .get_ro
= dm6444evm_mmc_get_ro
,
571 .version
= MMC_CTLR_VERSION_1
574 static struct i2c_board_info __initdata i2c_info
[] = {
576 I2C_BOARD_INFO("dm6446evm_msp", 0x23),
579 I2C_BOARD_INFO("pcf8574", 0x38),
580 .platform_data
= &pcf_data_u2
,
583 I2C_BOARD_INFO("pcf8574", 0x39),
584 .platform_data
= &pcf_data_u18
,
587 I2C_BOARD_INFO("pcf8574", 0x3a),
588 .platform_data
= &pcf_data_u35
,
591 I2C_BOARD_INFO("24c256", 0x50),
592 .platform_data
= &eeprom_info
,
595 I2C_BOARD_INFO("tlv320aic33", 0x1b),
599 /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
600 * which requires 100 usec of idle bus after i2c writes sent to it.
602 static struct davinci_i2c_platform_data i2c_pdata
= {
603 .bus_freq
= 20 /* kHz */,
604 .bus_delay
= 100 /* usec */,
609 static void __init
evm_init_i2c(void)
611 davinci_init_i2c(&i2c_pdata
);
612 i2c_add_driver(&dm6446evm_msp_driver
);
613 i2c_register_board_info(1, i2c_info
, ARRAY_SIZE(i2c_info
));
616 static struct platform_device
*davinci_evm_devices
[] __initdata
= {
621 static struct davinci_uart_config uart_config __initdata
= {
622 .enabled_uarts
= (1 << 0),
626 davinci_evm_map_io(void)
628 /* setup input configuration for VPFE input devices */
629 dm644x_set_vpfe_config(&vpfe_cfg
);
633 static int davinci_phy_fixup(struct phy_device
*phydev
)
635 unsigned int control
;
636 /* CRITICAL: Fix for increasing PHY signal drive strength for
637 * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
638 * signal strength was low causing TX to fail randomly. The
639 * fix is to Set bit 11 (Increased MII drive strength) of PHY
640 * register 26 (Digital Config register) on this phy. */
641 control
= phy_read(phydev
, 26);
642 phy_write(phydev
, 26, (control
| 0x800));
646 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
647 defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
653 #if defined(CONFIG_MTD_PHYSMAP) || \
654 defined(CONFIG_MTD_PHYSMAP_MODULE)
660 #if defined(CONFIG_MTD_NAND_DAVINCI) || \
661 defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
667 static __init
void davinci_evm_init(void)
669 struct clk
*aemif_clk
;
670 struct davinci_soc_info
*soc_info
= &davinci_soc_info
;
672 aemif_clk
= clk_get(NULL
, "aemif");
673 clk_enable(aemif_clk
);
676 if (HAS_NAND
|| HAS_NOR
)
677 pr_warning("WARNING: both IDE and Flash are "
678 "enabled, but they share AEMIF pins.\n"
679 "\tDisable IDE for NAND/NOR support.\n");
681 } else if (HAS_NAND
|| HAS_NOR
) {
682 davinci_cfg_reg(DM644X_HPIEN_DISABLE
);
683 davinci_cfg_reg(DM644X_ATAEN_DISABLE
);
685 /* only one device will be jumpered and detected */
687 platform_device_register(&davinci_evm_nandflash_device
);
688 evm_leds
[7].default_trigger
= "nand-disk";
690 pr_warning("WARNING: both NAND and NOR flash "
691 "are enabled; disable one of them.\n");
693 platform_device_register(&davinci_evm_norflash_device
);
696 platform_add_devices(davinci_evm_devices
,
697 ARRAY_SIZE(davinci_evm_devices
));
700 davinci_setup_mmc(0, &dm6446evm_mmc_config
);
702 davinci_serial_init(&uart_config
);
703 dm644x_init_asp(&dm644x_evm_snd_data
);
705 /* irlml6401 switches over 1A, in under 8 msec */
706 davinci_setup_usb(1000, 8);
708 soc_info
->emac_pdata
->phy_id
= DM644X_EVM_PHY_ID
;
709 /* Register the fixup for PHY on DaVinci */
710 phy_register_fixup_for_uid(LXT971_PHY_ID
, LXT971_PHY_MASK
,
715 MACHINE_START(DAVINCI_EVM
, "DaVinci DM644x EVM")
716 /* Maintainer: MontaVista Software <source@mvista.com> */
717 .atag_offset
= 0x100,
718 .map_io
= davinci_evm_map_io
,
719 .init_irq
= davinci_irq_init
,
720 .timer
= &davinci_timer
,
721 .init_machine
= davinci_evm_init
,
722 .dma_zone_size
= SZ_128M
,
723 .restart
= davinci_restart
,