?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
[linux-2.6.git] / drivers / usb / musb / musb_gadget.c
blobd2d3a173b31503b54f9071e9af48f4878567856f
1 /*
2 * MUSB OTG driver peripheral support
3 *
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
7 * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
21 * 02110-1301 USA
22 *
23 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
24 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
26 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
29 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
30 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 */
35
36 #include <linux/kernel.h>
37 #include <linux/list.h>
38 #include <linux/timer.h>
39 #include <linux/module.h>
40 #include <linux/smp.h>
41 #include <linux/spinlock.h>
42 #include <linux/delay.h>
43 #include <linux/dma-mapping.h>
44 #include <linux/slab.h>
45
46 #include "musb_core.h"
47
48
49 /* ----------------------------------------------------------------------- */
50
51 #define is_buffer_mapped(req) (is_dma_capable() && \
52 (req->map_state != UN_MAPPED))
53
54 /* Maps the buffer to dma */
55
56 static inline void map_dma_buffer(struct musb_request *request,
57 struct musb *musb, struct musb_ep *musb_ep)
58 {
59 int compatible = true;
60 struct dma_controller *dma = musb->dma_controller;
61
62 request->map_state = UN_MAPPED;
63
64 if (!is_dma_capable() || !musb_ep->dma)
65 return;
66
67 /* Check if DMA engine can handle this request.
68 * DMA code must reject the USB request explicitly.
69 * Default behaviour is to map the request.
70 */
71 if (dma->is_compatible)
72 compatible = dma->is_compatible(musb_ep->dma,
73 musb_ep->packet_sz, request->request.buf,
74 request->request.length);
75 if (!compatible)
76 return;
77
78 if (request->request.dma == DMA_ADDR_INVALID) {
79 dma_addr_t dma_addr;
80 int ret;
81
82 dma_addr = dma_map_single(
83 musb->controller,
84 request->request.buf,
85 request->request.length,
86 request->tx
87 ? DMA_TO_DEVICE
88 : DMA_FROM_DEVICE);
89 ret = dma_mapping_error(musb->controller, dma_addr);
90 if (ret)
91 return;
92
93 request->request.dma = dma_addr;
94 request->map_state = MUSB_MAPPED;
95 } else {
96 dma_sync_single_for_device(musb->controller,
97 request->request.dma,
98 request->request.length,
99 request->tx
100 ? DMA_TO_DEVICE
101 : DMA_FROM_DEVICE);
102 request->map_state = PRE_MAPPED;
103 }
104 }
105
106 /* Unmap the buffer from dma and maps it back to cpu */
107 static inline void unmap_dma_buffer(struct musb_request *request,
108 struct musb *musb)
109 {
110 struct musb_ep *musb_ep = request->ep;
111
112 if (!is_buffer_mapped(request) || !musb_ep->dma)
113 return;
114
115 if (request->request.dma == DMA_ADDR_INVALID) {
116 dev_vdbg(musb->controller,
117 "not unmapping a never mapped buffer\n");
118 return;
119 }
120 if (request->map_state == MUSB_MAPPED) {
121 dma_unmap_single(musb->controller,
122 request->request.dma,
123 request->request.length,
124 request->tx
125 ? DMA_TO_DEVICE
126 : DMA_FROM_DEVICE);
127 request->request.dma = DMA_ADDR_INVALID;
128 } else { /* PRE_MAPPED */
129 dma_sync_single_for_cpu(musb->controller,
130 request->request.dma,
131 request->request.length,
132 request->tx
133 ? DMA_TO_DEVICE
134 : DMA_FROM_DEVICE);
135 }
136 request->map_state = UN_MAPPED;
137 }
138
139 /*
140 * Immediately complete a request.
141 *
142 * @param request the request to complete
143 * @param status the status to complete the request with
144 * Context: controller locked, IRQs blocked.
145 */
146 void musb_g_giveback(
147 struct musb_ep *ep,
148 struct usb_request *request,
149 int status)
150 __releases(ep->musb->lock)
151 __acquires(ep->musb->lock)
152 {
153 struct musb_request *req;
154 struct musb *musb;
155 int busy = ep->busy;
156
157 req = to_musb_request(request);
158
159 list_del(&req->list);
160 if (req->request.status == -EINPROGRESS)
161 req->request.status = status;
162 musb = req->musb;
163
164 ep->busy = 1;
165 spin_unlock(&musb->lock);
166
167 if (!dma_mapping_error(&musb->g.dev, request->dma))
168 unmap_dma_buffer(req, musb);
169
170 if (request->status == 0)
171 dev_dbg(musb->controller, "%s done request %p, %d/%d\n",
172 ep->end_point.name, request,
173 req->request.actual, req->request.length);
174 else
175 dev_dbg(musb->controller, "%s request %p, %d/%d fault %d\n",
176 ep->end_point.name, request,
177 req->request.actual, req->request.length,
178 request->status);
179 req->request.complete(&req->ep->end_point, &req->request);
180 spin_lock(&musb->lock);
181 ep->busy = busy;
182 }
183
184 /* ----------------------------------------------------------------------- */
185
186 /*
187 * Abort requests queued to an endpoint using the status. Synchronous.
188 * caller locked controller and blocked irqs, and selected this ep.
189 */
190 static void nuke(struct musb_ep *ep, const int status)
191 {
192 struct musb *musb = ep->musb;
193 struct musb_request *req = NULL;
194 void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
195
196 ep->busy = 1;
197
198 if (is_dma_capable() && ep->dma) {
199 struct dma_controller *c = ep->musb->dma_controller;
200 int value;
201
202 if (ep->is_in) {
203 /*
204 * The programming guide says that we must not clear
205 * the DMAMODE bit before DMAENAB, so we only
206 * clear it in the second write...
207 */
208 musb_writew(epio, MUSB_TXCSR,
209 MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
210 musb_writew(epio, MUSB_TXCSR,
211 0 | MUSB_TXCSR_FLUSHFIFO);
212 } else {
213 musb_writew(epio, MUSB_RXCSR,
214 0 | MUSB_RXCSR_FLUSHFIFO);
215 musb_writew(epio, MUSB_RXCSR,
216 0 | MUSB_RXCSR_FLUSHFIFO);
217 }
218
219 value = c->channel_abort(ep->dma);
220 dev_dbg(musb->controller, "%s: abort DMA --> %d\n",
221 ep->name, value);
222 c->channel_release(ep->dma);
223 ep->dma = NULL;
224 }
225
226 while (!list_empty(&ep->req_list)) {
227 req = list_first_entry(&ep->req_list, struct musb_request, list);
228 musb_g_giveback(ep, &req->request, status);
229 }
230 }
231
232 /* ----------------------------------------------------------------------- */
233
234 /* Data transfers - pure PIO, pure DMA, or mixed mode */
235
236 /*
237 * This assumes the separate CPPI engine is responding to DMA requests
238 * from the usb core ... sequenced a bit differently from mentor dma.
239 */
240
241 static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
242 {
243 if (can_bulk_split(musb, ep->type))
244 return ep->hw_ep->max_packet_sz_tx;
245 else
246 return ep->packet_sz;
247 }
248
249 /*
250 * An endpoint is transmitting data. This can be called either from
251 * the IRQ routine or from ep.queue() to kickstart a request on an
252 * endpoint.
253 *
254 * Context: controller locked, IRQs blocked, endpoint selected
255 */
256 static void txstate(struct musb *musb, struct musb_request *req)
257 {
258 u8 epnum = req->epnum;
259 struct musb_ep *musb_ep;
260 void __iomem *epio = musb->endpoints[epnum].regs;
261 struct usb_request *request;
262 u16 fifo_count = 0, csr;
263 int use_dma = 0;
264
265 musb_ep = req->ep;
266
267 /* Check if EP is disabled */
268 if (!musb_ep->desc) {
269 dev_dbg(musb->controller, "ep:%s disabled - ignore request\n",
270 musb_ep->end_point.name);
271 return;
272 }
273
274 /* we shouldn't get here while DMA is active ... but we do ... */
275 if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
276 dev_dbg(musb->controller, "dma pending...\n");
277 return;
278 }
279
280 /* read TXCSR before */
281 csr = musb_readw(epio, MUSB_TXCSR);
282
283 request = &req->request;
284 fifo_count = min(max_ep_writesize(musb, musb_ep),
285 (int)(request->length - request->actual));
286
287 if (csr & MUSB_TXCSR_TXPKTRDY) {
288 dev_dbg(musb->controller, "%s old packet still ready , txcsr %03x\n",
289 musb_ep->end_point.name, csr);
290 return;
291 }
292
293 if (csr & MUSB_TXCSR_P_SENDSTALL) {
294 dev_dbg(musb->controller, "%s stalling, txcsr %03x\n",
295 musb_ep->end_point.name, csr);
296 return;
297 }
298
299 dev_dbg(musb->controller, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
300 epnum, musb_ep->packet_sz, fifo_count,
301 csr);
302
303 #ifndef CONFIG_MUSB_PIO_ONLY
304 if (is_buffer_mapped(req)) {
305 struct dma_controller *c = musb->dma_controller;
306 size_t request_size;
307
308 /* setup DMA, then program endpoint CSR */
309 request_size = min_t(size_t, request->length - request->actual,
310 musb_ep->dma->max_len);
311
312 use_dma = (request->dma != DMA_ADDR_INVALID && request_size);
313
314 /* MUSB_TXCSR_P_ISO is still set correctly */
315
316 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
317 {
318 if (request_size < musb_ep->packet_sz)
319 musb_ep->dma->desired_mode = 0;
320 else
321 musb_ep->dma->desired_mode = 1;
322
323 use_dma = use_dma && c->channel_program(
324 musb_ep->dma, musb_ep->packet_sz,
325 musb_ep->dma->desired_mode,
326 request->dma + request->actual, request_size);
327 if (use_dma) {
328 if (musb_ep->dma->desired_mode == 0) {
329 /*
330 * We must not clear the DMAMODE bit
331 * before the DMAENAB bit -- and the
332 * latter doesn't always get cleared
333 * before we get here...
334 */
335 csr &= ~(MUSB_TXCSR_AUTOSET
336 | MUSB_TXCSR_DMAENAB);
337 musb_writew(epio, MUSB_TXCSR, csr
338 | MUSB_TXCSR_P_WZC_BITS);
339 csr &= ~MUSB_TXCSR_DMAMODE;
340 csr |= (MUSB_TXCSR_DMAENAB |
341 MUSB_TXCSR_MODE);
342 /* against programming guide */
343 } else {
344 csr |= (MUSB_TXCSR_DMAENAB
345 | MUSB_TXCSR_DMAMODE
346 | MUSB_TXCSR_MODE);
347 /*
348 * Enable Autoset according to table
349 * below
350 * bulk_split hb_mult Autoset_Enable
351 * 0 0 Yes(Normal)
352 * 0 >0 No(High BW ISO)
353 * 1 0 Yes(HS bulk)
354 * 1 >0 Yes(FS bulk)
355 */
356 if (!musb_ep->hb_mult ||
357 (musb_ep->hb_mult &&
358 can_bulk_split(musb,
359 musb_ep->type)))
360 csr |= MUSB_TXCSR_AUTOSET;
361 }
362 csr &= ~MUSB_TXCSR_P_UNDERRUN;
363
364 musb_writew(epio, MUSB_TXCSR, csr);
365 }
366 }
367
368 #endif
369 if (is_cppi_enabled()) {
370 /* program endpoint CSR first, then setup DMA */
371 csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
372 csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE |
373 MUSB_TXCSR_MODE;
374 musb_writew(epio, MUSB_TXCSR, (MUSB_TXCSR_P_WZC_BITS &
375 ~MUSB_TXCSR_P_UNDERRUN) | csr);
376
377 /* ensure writebuffer is empty */
378 csr = musb_readw(epio, MUSB_TXCSR);
379
380 /*
381 * NOTE host side sets DMAENAB later than this; both are
382 * OK since the transfer dma glue (between CPPI and
383 * Mentor fifos) just tells CPPI it could start. Data
384 * only moves to the USB TX fifo when both fifos are
385 * ready.
386 */
387 /*
388 * "mode" is irrelevant here; handle terminating ZLPs
389 * like PIO does, since the hardware RNDIS mode seems
390 * unreliable except for the
391 * last-packet-is-already-short case.
392 */
393 use_dma = use_dma && c->channel_program(
394 musb_ep->dma, musb_ep->packet_sz,
395 0,
396 request->dma + request->actual,
397 request_size);
398 if (!use_dma) {
399 c->channel_release(musb_ep->dma);
400 musb_ep->dma = NULL;
401 csr &= ~MUSB_TXCSR_DMAENAB;
402 musb_writew(epio, MUSB_TXCSR, csr);
403 /* invariant: prequest->buf is non-null */
404 }
405 } else if (tusb_dma_omap())
406 use_dma = use_dma && c->channel_program(
407 musb_ep->dma, musb_ep->packet_sz,
408 request->zero,
409 request->dma + request->actual,
410 request_size);
411 }
412 #endif
413
414 if (!use_dma) {
415 /*
416 * Unmap the dma buffer back to cpu if dma channel
417 * programming fails
418 */
419 unmap_dma_buffer(req, musb);
420
421 musb_write_fifo(musb_ep->hw_ep, fifo_count,
422 (u8 *) (request->buf + request->actual));
423 request->actual += fifo_count;
424 csr |= MUSB_TXCSR_TXPKTRDY;
425 csr &= ~MUSB_TXCSR_P_UNDERRUN;
426 musb_writew(epio, MUSB_TXCSR, csr);
427 }
428
429 /* host may already have the data when this message shows... */
430 dev_dbg(musb->controller, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
431 musb_ep->end_point.name, use_dma ? "dma" : "pio",
432 request->actual, request->length,
433 musb_readw(epio, MUSB_TXCSR),
434 fifo_count,
435 musb_readw(epio, MUSB_TXMAXP));
436 }
437
438 /*
439 * FIFO state update (e.g. data ready).
440 * Called from IRQ, with controller locked.
441 */
442 void musb_g_tx(struct musb *musb, u8 epnum)
443 {
444 u16 csr;
445 struct musb_request *req;
446 struct usb_request *request;
447 u8 __iomem *mbase = musb->mregs;
448 struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_in;
449 void __iomem *epio = musb->endpoints[epnum].regs;
450 struct dma_channel *dma;
451
452 musb_ep_select(mbase, epnum);
453 req = next_request(musb_ep);
454 request = &req->request;
455
456 csr = musb_readw(epio, MUSB_TXCSR);
457 dev_dbg(musb->controller, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
458
459 dma = is_dma_capable() ? musb_ep->dma : NULL;
460
461 /*
462 * REVISIT: for high bandwidth, MUSB_TXCSR_P_INCOMPTX
463 * probably rates reporting as a host error.
464 */
465 if (csr & MUSB_TXCSR_P_SENTSTALL) {
466 csr |= MUSB_TXCSR_P_WZC_BITS;
467 csr &= ~MUSB_TXCSR_P_SENTSTALL;
468 musb_writew(epio, MUSB_TXCSR, csr);
469 return;
470 }
471
472 if (csr & MUSB_TXCSR_P_UNDERRUN) {
473 /* We NAKed, no big deal... little reason to care. */
474 csr |= MUSB_TXCSR_P_WZC_BITS;
475 csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
476 musb_writew(epio, MUSB_TXCSR, csr);
477 dev_vdbg(musb->controller, "underrun on ep%d, req %p\n",
478 epnum, request);
479 }
480
481 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
482 /*
483 * SHOULD NOT HAPPEN... has with CPPI though, after
484 * changing SENDSTALL (and other cases); harmless?
485 */
486 dev_dbg(musb->controller, "%s dma still busy?\n", musb_ep->end_point.name);
487 return;
488 }
489
490 if (request) {
491 u8 is_dma = 0;
492
493 if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
494 is_dma = 1;
495 csr |= MUSB_TXCSR_P_WZC_BITS;
496 csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
497 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
498 musb_writew(epio, MUSB_TXCSR, csr);
499 /* Ensure writebuffer is empty. */
500 csr = musb_readw(epio, MUSB_TXCSR);
501 request->actual += musb_ep->dma->actual_len;
502 dev_dbg(musb->controller, "TXCSR%d %04x, DMA off, len %zu, req %p\n",
503 epnum, csr, musb_ep->dma->actual_len, request);
504 }
505
506 /*
507 * First, maybe a terminating short packet. Some DMA
508 * engines might handle this by themselves.
509 */
510 if ((request->zero && request->length
511 && (request->length % musb_ep->packet_sz == 0)
512 && (request->actual == request->length))
513 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
514 || (is_dma && (!dma->desired_mode ||
515 (request->actual &
516 (musb_ep->packet_sz - 1))))
517 #endif
518 ) {
519 /*
520 * On DMA completion, FIFO may not be
521 * available yet...
522 */
523 if (csr & MUSB_TXCSR_TXPKTRDY)
524 return;
525
526 dev_dbg(musb->controller, "sending zero pkt\n");
527 musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
528 | MUSB_TXCSR_TXPKTRDY);
529 request->zero = 0;
530 }
531
532 if (request->actual == request->length) {
533 musb_g_giveback(musb_ep, request, 0);
534 /*
535 * In the giveback function the MUSB lock is
536 * released and acquired after sometime. During
537 * this time period the INDEX register could get
538 * changed by the gadget_queue function especially
539 * on SMP systems. Reselect the INDEX to be sure
540 * we are reading/modifying the right registers
541 */
542 musb_ep_select(mbase, epnum);
543 req = musb_ep->desc ? next_request(musb_ep) : NULL;
544 if (!req) {
545 dev_dbg(musb->controller, "%s idle now\n",
546 musb_ep->end_point.name);
547 return;
548 }
549 }
550
551 txstate(musb, req);
552 }
553 }
554
555 /* ------------------------------------------------------------ */
556
557 /*
558 * Context: controller locked, IRQs blocked, endpoint selected
559 */
560 static void rxstate(struct musb *musb, struct musb_request *req)
561 {
562 const u8 epnum = req->epnum;
563 struct usb_request *request = &req->request;
564 struct musb_ep *musb_ep;
565 void __iomem *epio = musb->endpoints[epnum].regs;
566 unsigned len = 0;
567 u16 fifo_count;
568 u16 csr = musb_readw(epio, MUSB_RXCSR);
569 struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
570 u8 use_mode_1;
571
572 if (hw_ep->is_shared_fifo)
573 musb_ep = &hw_ep->ep_in;
574 else
575 musb_ep = &hw_ep->ep_out;
576
577 fifo_count = musb_ep->packet_sz;
578
579 /* Check if EP is disabled */
580 if (!musb_ep->desc) {
581 dev_dbg(musb->controller, "ep:%s disabled - ignore request\n",
582 musb_ep->end_point.name);
583 return;
584 }
585
586 /* We shouldn't get here while DMA is active, but we do... */
587 if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
588 dev_dbg(musb->controller, "DMA pending...\n");
589 return;
590 }
591
592 if (csr & MUSB_RXCSR_P_SENDSTALL) {
593 dev_dbg(musb->controller, "%s stalling, RXCSR %04x\n",
594 musb_ep->end_point.name, csr);
595 return;
596 }
597
598 if (is_cppi_enabled() && is_buffer_mapped(req)) {
599 struct dma_controller *c = musb->dma_controller;
600 struct dma_channel *channel = musb_ep->dma;
601
602 /* NOTE: CPPI won't actually stop advancing the DMA
603 * queue after short packet transfers, so this is almost
604 * always going to run as IRQ-per-packet DMA so that
605 * faults will be handled correctly.
606 */
607 if (c->channel_program(channel,
608 musb_ep->packet_sz,
609 !request->short_not_ok,
610 request->dma + request->actual,
611 request->length - request->actual)) {
612
613 /* make sure that if an rxpkt arrived after the irq,
614 * the cppi engine will be ready to take it as soon
615 * as DMA is enabled
616 */
617 csr &= ~(MUSB_RXCSR_AUTOCLEAR
618 | MUSB_RXCSR_DMAMODE);
619 csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS;
620 musb_writew(epio, MUSB_RXCSR, csr);
621 return;
622 }
623 }
624
625 if (csr & MUSB_RXCSR_RXPKTRDY) {
626 fifo_count = musb_readw(epio, MUSB_RXCOUNT);
627
628 /*
629 * Enable Mode 1 on RX transfers only when short_not_ok flag
630 * is set. Currently short_not_ok flag is set only from
631 * file_storage and f_mass_storage drivers
632 */
633
634 if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
635 use_mode_1 = 1;
636 else
637 use_mode_1 = 0;
638
639 if (request->actual < request->length) {
640 #ifdef CONFIG_USB_INVENTRA_DMA
641 if (is_buffer_mapped(req)) {
642 struct dma_controller *c;
643 struct dma_channel *channel;
644 int use_dma = 0;
645 unsigned int transfer_size;
646
647 c = musb->dma_controller;
648 channel = musb_ep->dma;
649
650 /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
651 * mode 0 only. So we do not get endpoint interrupts due to DMA
652 * completion. We only get interrupts from DMA controller.
653 *
654 * We could operate in DMA mode 1 if we knew the size of the tranfer
655 * in advance. For mass storage class, request->length = what the host
656 * sends, so that'd work. But for pretty much everything else,
657 * request->length is routinely more than what the host sends. For
658 * most these gadgets, end of is signified either by a short packet,
659 * or filling the last byte of the buffer. (Sending extra data in
660 * that last pckate should trigger an overflow fault.) But in mode 1,
661 * we don't get DMA completion interrupt for short packets.
662 *
663 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
664 * to get endpoint interrupt on every DMA req, but that didn't seem
665 * to work reliably.
666 *
667 * REVISIT an updated g_file_storage can set req->short_not_ok, which
668 * then becomes usable as a runtime "use mode 1" hint...
669 */
670
671 /* Experimental: Mode1 works with mass storage use cases */
672 if (use_mode_1) {
673 csr |= MUSB_RXCSR_AUTOCLEAR;
674 musb_writew(epio, MUSB_RXCSR, csr);
675 csr |= MUSB_RXCSR_DMAENAB;
676 musb_writew(epio, MUSB_RXCSR, csr);
677
678 /*
679 * this special sequence (enabling and then
680 * disabling MUSB_RXCSR_DMAMODE) is required
681 * to get DMAReq to activate
682 */
683 musb_writew(epio, MUSB_RXCSR,
684 csr | MUSB_RXCSR_DMAMODE);
685 musb_writew(epio, MUSB_RXCSR, csr);
686
687 transfer_size = min_t(unsigned int,
688 request->length -
689 request->actual,
690 channel->max_len);
691 musb_ep->dma->desired_mode = 1;
692 } else {
693 if (!musb_ep->hb_mult &&
694 musb_ep->hw_ep->rx_double_buffered)
695 csr |= MUSB_RXCSR_AUTOCLEAR;
696 csr |= MUSB_RXCSR_DMAENAB;
697 musb_writew(epio, MUSB_RXCSR, csr);
698
699 transfer_size = min(request->length - request->actual,
700 (unsigned)fifo_count);
701 musb_ep->dma->desired_mode = 0;
702 }
703
704 use_dma = c->channel_program(
705 channel,
706 musb_ep->packet_sz,
707 channel->desired_mode,
708 request->dma
709 + request->actual,
710 transfer_size);
711
712 if (use_dma)
713 return;
714 }
715 #elif defined(CONFIG_USB_UX500_DMA)
716 if ((is_buffer_mapped(req)) &&
717 (request->actual < request->length)) {
718
719 struct dma_controller *c;
720 struct dma_channel *channel;
721 unsigned int transfer_size = 0;
722
723 c = musb->dma_controller;
724 channel = musb_ep->dma;
725
726 /* In case first packet is short */
727 if (fifo_count < musb_ep->packet_sz)
728 transfer_size = fifo_count;
729 else if (request->short_not_ok)
730 transfer_size = min_t(unsigned int,
731 request->length -
732 request->actual,
733 channel->max_len);
734 else
735 transfer_size = min_t(unsigned int,
736 request->length -
737 request->actual,
738 (unsigned)fifo_count);
739
740 csr &= ~MUSB_RXCSR_DMAMODE;
741 csr |= (MUSB_RXCSR_DMAENAB |
742 MUSB_RXCSR_AUTOCLEAR);
743
744 musb_writew(epio, MUSB_RXCSR, csr);
745
746 if (transfer_size <= musb_ep->packet_sz) {
747 musb_ep->dma->desired_mode = 0;
748 } else {
749 musb_ep->dma->desired_mode = 1;
750 /* Mode must be set after DMAENAB */
751 csr |= MUSB_RXCSR_DMAMODE;
752 musb_writew(epio, MUSB_RXCSR, csr);
753 }
754
755 if (c->channel_program(channel,
756 musb_ep->packet_sz,
757 channel->desired_mode,
758 request->dma
759 + request->actual,
760 transfer_size))
761
762 return;
763 }
764 #endif /* Mentor's DMA */
765
766 len = request->length - request->actual;
767 dev_dbg(musb->controller, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
768 musb_ep->end_point.name,
769 fifo_count, len,
770 musb_ep->packet_sz);
771
772 fifo_count = min_t(unsigned, len, fifo_count);
773
774 #ifdef CONFIG_USB_TUSB_OMAP_DMA
775 if (tusb_dma_omap() && is_buffer_mapped(req)) {
776 struct dma_controller *c = musb->dma_controller;
777 struct dma_channel *channel = musb_ep->dma;
778 u32 dma_addr = request->dma + request->actual;
779 int ret;
780
781 ret = c->channel_program(channel,
782 musb_ep->packet_sz,
783 channel->desired_mode,
784 dma_addr,
785 fifo_count);
786 if (ret)
787 return;
788 }
789 #endif
790 /*
791 * Unmap the dma buffer back to cpu if dma channel
792 * programming fails. This buffer is mapped if the
793 * channel allocation is successful
794 */
795 if (is_buffer_mapped(req)) {
796 unmap_dma_buffer(req, musb);
797
798 /*
799 * Clear DMAENAB and AUTOCLEAR for the
800 * PIO mode transfer
801 */
802 csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
803 musb_writew(epio, MUSB_RXCSR, csr);
804 }
805
806 musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
807 (request->buf + request->actual));
808 request->actual += fifo_count;
809
810 /* REVISIT if we left anything in the fifo, flush
811 * it and report -EOVERFLOW
812 */
813
814 /* ack the read! */
815 csr |= MUSB_RXCSR_P_WZC_BITS;
816 csr &= ~MUSB_RXCSR_RXPKTRDY;
817 musb_writew(epio, MUSB_RXCSR, csr);
818 }
819 }
820
821 /* reach the end or short packet detected */
822 if (request->actual == request->length ||
823 fifo_count < musb_ep->packet_sz)
824 musb_g_giveback(musb_ep, request, 0);
825 }
826
827 /*
828 * Data ready for a request; called from IRQ
829 */
830 void musb_g_rx(struct musb *musb, u8 epnum)
831 {
832 u16 csr;
833 struct musb_request *req;
834 struct usb_request *request;
835 void __iomem *mbase = musb->mregs;
836 struct musb_ep *musb_ep;
837 void __iomem *epio = musb->endpoints[epnum].regs;
838 struct dma_channel *dma;
839 struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
840
841 if (hw_ep->is_shared_fifo)
842 musb_ep = &hw_ep->ep_in;
843 else
844 musb_ep = &hw_ep->ep_out;
845
846 musb_ep_select(mbase, epnum);
847
848 req = next_request(musb_ep);
849 if (!req)
850 return;
851
852 request = &req->request;
853
854 csr = musb_readw(epio, MUSB_RXCSR);
855 dma = is_dma_capable() ? musb_ep->dma : NULL;
856
857 dev_dbg(musb->controller, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
858 csr, dma ? " (dma)" : "", request);
859
860 if (csr & MUSB_RXCSR_P_SENTSTALL) {
861 csr |= MUSB_RXCSR_P_WZC_BITS;
862 csr &= ~MUSB_RXCSR_P_SENTSTALL;
863 musb_writew(epio, MUSB_RXCSR, csr);
864 return;
865 }
866
867 if (csr & MUSB_RXCSR_P_OVERRUN) {
868 /* csr |= MUSB_RXCSR_P_WZC_BITS; */
869 csr &= ~MUSB_RXCSR_P_OVERRUN;
870 musb_writew(epio, MUSB_RXCSR, csr);
871
872 dev_dbg(musb->controller, "%s iso overrun on %p\n", musb_ep->name, request);
873 if (request->status == -EINPROGRESS)
874 request->status = -EOVERFLOW;
875 }
876 if (csr & MUSB_RXCSR_INCOMPRX) {
877 /* REVISIT not necessarily an error */
878 dev_dbg(musb->controller, "%s, incomprx\n", musb_ep->end_point.name);
879 }
880
881 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
882 /* "should not happen"; likely RXPKTRDY pending for DMA */
883 dev_dbg(musb->controller, "%s busy, csr %04x\n",
884 musb_ep->end_point.name, csr);
885 return;
886 }
887
888 if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
889 csr &= ~(MUSB_RXCSR_AUTOCLEAR
890 | MUSB_RXCSR_DMAENAB
891 | MUSB_RXCSR_DMAMODE);
892 musb_writew(epio, MUSB_RXCSR,
893 MUSB_RXCSR_P_WZC_BITS | csr);
894
895 request->actual += musb_ep->dma->actual_len;
896
897 dev_dbg(musb->controller, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
898 epnum, csr,
899 musb_readw(epio, MUSB_RXCSR),
900 musb_ep->dma->actual_len, request);
901
902 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \
903 defined(CONFIG_USB_UX500_DMA)
904 /* Autoclear doesn't clear RxPktRdy for short packets */
905 if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered)
906 || (dma->actual_len
907 & (musb_ep->packet_sz - 1))) {
908 /* ack the read! */
909 csr &= ~MUSB_RXCSR_RXPKTRDY;
910 musb_writew(epio, MUSB_RXCSR, csr);
911 }
912
913 /* incomplete, and not short? wait for next IN packet */
914 if ((request->actual < request->length)
915 && (musb_ep->dma->actual_len
916 == musb_ep->packet_sz)) {
917 /* In double buffer case, continue to unload fifo if
918 * there is Rx packet in FIFO.
919 **/
920 csr = musb_readw(epio, MUSB_RXCSR);
921 if ((csr & MUSB_RXCSR_RXPKTRDY) &&
922 hw_ep->rx_double_buffered)
923 goto exit;
924 return;
925 }
926 #endif
927 musb_g_giveback(musb_ep, request, 0);
928 /*
929 * In the giveback function the MUSB lock is
930 * released and acquired after sometime. During
931 * this time period the INDEX register could get
932 * changed by the gadget_queue function especially
933 * on SMP systems. Reselect the INDEX to be sure
934 * we are reading/modifying the right registers
935 */
936 musb_ep_select(mbase, epnum);
937
938 req = next_request(musb_ep);
939 if (!req)
940 return;
941 }
942 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \
943 defined(CONFIG_USB_UX500_DMA)
944 exit:
945 #endif
946 /* Analyze request */
947 rxstate(musb, req);
948 }
949
950 /* ------------------------------------------------------------ */
951
952 static int musb_gadget_enable(struct usb_ep *ep,
953 const struct usb_endpoint_descriptor *desc)
954 {
955 unsigned long flags;
956 struct musb_ep *musb_ep;
957 struct musb_hw_ep *hw_ep;
958 void __iomem *regs;
959 struct musb *musb;
960 void __iomem *mbase;
961 u8 epnum;
962 u16 csr;
963 unsigned tmp;
964 int status = -EINVAL;
965
966 if (!ep || !desc)
967 return -EINVAL;
968
969 musb_ep = to_musb_ep(ep);
970 hw_ep = musb_ep->hw_ep;
971 regs = hw_ep->regs;
972 musb = musb_ep->musb;
973 mbase = musb->mregs;
974 epnum = musb_ep->current_epnum;
975
976 spin_lock_irqsave(&musb->lock, flags);
977
978 if (musb_ep->desc) {
979 status = -EBUSY;
980 goto fail;
981 }
982 musb_ep->type = usb_endpoint_type(desc);
983
984 /* check direction and (later) maxpacket size against endpoint */
985 if (usb_endpoint_num(desc) != epnum)
986 goto fail;
987
988 /* REVISIT this rules out high bandwidth periodic transfers */
989 tmp = usb_endpoint_maxp(desc);
990 if (tmp & ~0x07ff) {
991 int ok;
992
993 if (usb_endpoint_dir_in(desc))
994 ok = musb->hb_iso_tx;
995 else
996 ok = musb->hb_iso_rx;
997
998 if (!ok) {
999 dev_dbg(musb->controller, "no support for high bandwidth ISO\n");
1000 goto fail;
1001 }
1002 musb_ep->hb_mult = (tmp >> 11) & 3;
1003 } else {
1004 musb_ep->hb_mult = 0;
1005 }
1006
1007 musb_ep->packet_sz = tmp & 0x7ff;
1008 tmp = musb_ep->packet_sz * (musb_ep->hb_mult + 1);
1009
1010 /* enable the interrupts for the endpoint, set the endpoint
1011 * packet size (or fail), set the mode, clear the fifo
1012 */
1013 musb_ep_select(mbase, epnum);
1014 if (usb_endpoint_dir_in(desc)) {
1015
1016 if (hw_ep->is_shared_fifo)
1017 musb_ep->is_in = 1;
1018 if (!musb_ep->is_in)
1019 goto fail;
1020
1021 if (tmp > hw_ep->max_packet_sz_tx) {
1022 dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
1023 goto fail;
1024 }
1025
1026 musb->intrtxe |= (1 << epnum);
1027 musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe);
1028
1029 /* REVISIT if can_bulk_split(), use by updating "tmp";
1030 * likewise high bandwidth periodic tx
1031 */
1032 /* Set TXMAXP with the FIFO size of the endpoint
1033 * to disable double buffering mode.
1034 */
1035 if (musb->double_buffer_not_ok) {
1036 musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
1037 } else {
1038 if (can_bulk_split(musb, musb_ep->type))
1039 musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
1040 musb_ep->packet_sz) - 1;
1041 musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
1042 | (musb_ep->hb_mult << 11));
1043 }
1044
1045 csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
1046 if (musb_readw(regs, MUSB_TXCSR)
1047 & MUSB_TXCSR_FIFONOTEMPTY)
1048 csr |= MUSB_TXCSR_FLUSHFIFO;
1049 if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
1050 csr |= MUSB_TXCSR_P_ISO;
1051
1052 /* set twice in case of double buffering */
1053 musb_writew(regs, MUSB_TXCSR, csr);
1054 /* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
1055 musb_writew(regs, MUSB_TXCSR, csr);
1056
1057 } else {
1058
1059 if (hw_ep->is_shared_fifo)
1060 musb_ep->is_in = 0;
1061 if (musb_ep->is_in)
1062 goto fail;
1063
1064 if (tmp > hw_ep->max_packet_sz_rx) {
1065 dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
1066 goto fail;
1067 }
1068
1069 musb->intrrxe |= (1 << epnum);
1070 musb_writew(mbase, MUSB_INTRRXE, musb->intrrxe);
1071
1072 /* REVISIT if can_bulk_combine() use by updating "tmp"
1073 * likewise high bandwidth periodic rx
1074 */
1075 /* Set RXMAXP with the FIFO size of the endpoint
1076 * to disable double buffering mode.
1077 */
1078 if (musb->double_buffer_not_ok)
1079 musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
1080 else
1081 musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
1082 | (musb_ep->hb_mult << 11));
1083
1084 /* force shared fifo to OUT-only mode */
1085 if (hw_ep->is_shared_fifo) {
1086 csr = musb_readw(regs, MUSB_TXCSR);
1087 csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
1088 musb_writew(regs, MUSB_TXCSR, csr);
1089 }
1090
1091 csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG;
1092 if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
1093 csr |= MUSB_RXCSR_P_ISO;
1094 else if (musb_ep->type == USB_ENDPOINT_XFER_INT)
1095 csr |= MUSB_RXCSR_DISNYET;
1096
1097 /* set twice in case of double buffering */
1098 musb_writew(regs, MUSB_RXCSR, csr);
1099 musb_writew(regs, MUSB_RXCSR, csr);
1100 }
1101
1102 /* NOTE: all the I/O code _should_ work fine without DMA, in case
1103 * for some reason you run out of channels here.
1104 */
1105 if (is_dma_capable() && musb->dma_controller) {
1106 struct dma_controller *c = musb->dma_controller;
1107
1108 musb_ep->dma = c->channel_alloc(c, hw_ep,
1109 (desc->bEndpointAddress & USB_DIR_IN));
1110 } else
1111 musb_ep->dma = NULL;
1112
1113 musb_ep->desc = desc;
1114 musb_ep->busy = 0;
1115 musb_ep->wedged = 0;
1116 status = 0;
1117
1118 pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n",
1119 musb_driver_name, musb_ep->end_point.name,
1120 ({ char *s; switch (musb_ep->type) {
1121 case USB_ENDPOINT_XFER_BULK: s = "bulk"; break;
1122 case USB_ENDPOINT_XFER_INT: s = "int"; break;
1123 default: s = "iso"; break;
1124 } s; }),
1125 musb_ep->is_in ? "IN" : "OUT",
1126 musb_ep->dma ? "dma, " : "",
1127 musb_ep->packet_sz);
1128
1129 schedule_work(&musb->irq_work);
1130
1131 fail:
1132 spin_unlock_irqrestore(&musb->lock, flags);
1133 return status;
1134 }
1135
1136 /*
1137 * Disable an endpoint flushing all requests queued.
1138 */
1139 static int musb_gadget_disable(struct usb_ep *ep)
1140 {
1141 unsigned long flags;
1142 struct musb *musb;
1143 u8 epnum;
1144 struct musb_ep *musb_ep;
1145 void __iomem *epio;
1146 int status = 0;
1147
1148 musb_ep = to_musb_ep(ep);
1149 musb = musb_ep->musb;
1150 epnum = musb_ep->current_epnum;
1151 epio = musb->endpoints[epnum].regs;
1152
1153 spin_lock_irqsave(&musb->lock, flags);
1154 musb_ep_select(musb->mregs, epnum);
1155
1156 /* zero the endpoint sizes */
1157 if (musb_ep->is_in) {
1158 musb->intrtxe &= ~(1 << epnum);
1159 musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
1160 musb_writew(epio, MUSB_TXMAXP, 0);
1161 } else {
1162 musb->intrrxe &= ~(1 << epnum);
1163 musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe);
1164 musb_writew(epio, MUSB_RXMAXP, 0);
1165 }
1166
1167 musb_ep->desc = NULL;
1168 musb_ep->end_point.desc = NULL;
1169
1170 /* abort all pending DMA and requests */
1171 nuke(musb_ep, -ESHUTDOWN);
1172
1173 schedule_work(&musb->irq_work);
1174
1175 spin_unlock_irqrestore(&(musb->lock), flags);
1176
1177 dev_dbg(musb->controller, "%s\n", musb_ep->end_point.name);
1178
1179 return status;
1180 }
1181
1182 /*
1183 * Allocate a request for an endpoint.
1184 * Reused by ep0 code.
1185 */
1186 struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
1187 {
1188 struct musb_ep *musb_ep = to_musb_ep(ep);
1189 struct musb *musb = musb_ep->musb;
1190 struct musb_request *request = NULL;
1191
1192 request = kzalloc(sizeof *request, gfp_flags);
1193 if (!request) {
1194 dev_dbg(musb->controller, "not enough memory\n");
1195 return NULL;
1196 }
1197
1198 request->request.dma = DMA_ADDR_INVALID;
1199 request->epnum = musb_ep->current_epnum;
1200 request->ep = musb_ep;
1201
1202 return &request->request;
1203 }
1204
1205 /*
1206 * Free a request
1207 * Reused by ep0 code.
1208 */
1209 void musb_free_request(struct usb_ep *ep, struct usb_request *req)
1210 {
1211 kfree(to_musb_request(req));
1212 }
1213
1214 static LIST_HEAD(buffers);
1215
1216 struct free_record {
1217 struct list_head list;
1218 struct device *dev;
1219 unsigned bytes;
1220 dma_addr_t dma;
1221 };
1222
1223 /*
1224 * Context: controller locked, IRQs blocked.
1225 */
1226 void musb_ep_restart(struct musb *musb, struct musb_request *req)
1227 {
1228 dev_dbg(musb->controller, "<== %s request %p len %u on hw_ep%d\n",
1229 req->tx ? "TX/IN" : "RX/OUT",
1230 &req->request, req->request.length, req->epnum);
1231
1232 musb_ep_select(musb->mregs, req->epnum);
1233 if (req->tx)
1234 txstate(musb, req);
1235 else
1236 rxstate(musb, req);
1237 }
1238
1239 static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
1240 gfp_t gfp_flags)
1241 {
1242 struct musb_ep *musb_ep;
1243 struct musb_request *request;
1244 struct musb *musb;
1245 int status = 0;
1246 unsigned long lockflags;
1247
1248 if (!ep || !req)
1249 return -EINVAL;
1250 if (!req->buf)
1251 return -ENODATA;
1252
1253 musb_ep = to_musb_ep(ep);
1254 musb = musb_ep->musb;
1255
1256 request = to_musb_request(req);
1257 request->musb = musb;
1258
1259 if (request->ep != musb_ep)
1260 return -EINVAL;
1261
1262 dev_dbg(musb->controller, "<== to %s request=%p\n", ep->name, req);
1263
1264 /* request is mine now... */
1265 request->request.actual = 0;
1266 request->request.status = -EINPROGRESS;
1267 request->epnum = musb_ep->current_epnum;
1268 request->tx = musb_ep->is_in;
1269
1270 map_dma_buffer(request, musb, musb_ep);
1271
1272 spin_lock_irqsave(&musb->lock, lockflags);
1273
1274 /* don't queue if the ep is down */
1275 if (!musb_ep->desc) {
1276 dev_dbg(musb->controller, "req %p queued to %s while ep %s\n",
1277 req, ep->name, "disabled");
1278 status = -ESHUTDOWN;
1279 unmap_dma_buffer(request, musb);
1280 goto unlock;
1281 }
1282
1283 /* add request to the list */
1284 list_add_tail(&request->list, &musb_ep->req_list);
1285
1286 /* it this is the head of the queue, start i/o ... */
1287 if (!musb_ep->busy && &request->list == musb_ep->req_list.next)
1288 musb_ep_restart(musb, request);
1289
1290 unlock:
1291 spin_unlock_irqrestore(&musb->lock, lockflags);
1292 return status;
1293 }
1294
1295 static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
1296 {
1297 struct musb_ep *musb_ep = to_musb_ep(ep);
1298 struct musb_request *req = to_musb_request(request);
1299 struct musb_request *r;
1300 unsigned long flags;
1301 int status = 0;
1302 struct musb *musb = musb_ep->musb;
1303
1304 if (!ep || !request || to_musb_request(request)->ep != musb_ep)
1305 return -EINVAL;
1306
1307 spin_lock_irqsave(&musb->lock, flags);
1308
1309 list_for_each_entry(r, &musb_ep->req_list, list) {
1310 if (r == req)
1311 break;
1312 }
1313 if (r != req) {
1314 dev_dbg(musb->controller, "request %p not queued to %s\n", request, ep->name);
1315 status = -EINVAL;
1316 goto done;
1317 }
1318
1319 /* if the hardware doesn't have the request, easy ... */
1320 if (musb_ep->req_list.next != &req->list || musb_ep->busy)
1321 musb_g_giveback(musb_ep, request, -ECONNRESET);
1322
1323 /* ... else abort the dma transfer ... */
1324 else if (is_dma_capable() && musb_ep->dma) {
1325 struct dma_controller *c = musb->dma_controller;
1326
1327 musb_ep_select(musb->mregs, musb_ep->current_epnum);
1328 if (c->channel_abort)
1329 status = c->channel_abort(musb_ep->dma);
1330 else
1331 status = -EBUSY;
1332 if (status == 0)
1333 musb_g_giveback(musb_ep, request, -ECONNRESET);
1334 } else {
1335 /* NOTE: by sticking to easily tested hardware/driver states,
1336 * we leave counting of in-flight packets imprecise.
1337 */
1338 musb_g_giveback(musb_ep, request, -ECONNRESET);
1339 }
1340
1341 done:
1342 spin_unlock_irqrestore(&musb->lock, flags);
1343 return status;
1344 }
1345
1346 /*
1347 * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
1348 * data but will queue requests.
1349 *
1350 * exported to ep0 code
1351 */
1352 static int musb_gadget_set_halt(struct usb_ep *ep, int value)
1353 {
1354 struct musb_ep *musb_ep = to_musb_ep(ep);
1355 u8 epnum = musb_ep->current_epnum;
1356 struct musb *musb = musb_ep->musb;
1357 void __iomem *epio = musb->endpoints[epnum].regs;
1358 void __iomem *mbase;
1359 unsigned long flags;
1360 u16 csr;
1361 struct musb_request *request;
1362 int status = 0;
1363
1364 if (!ep)
1365 return -EINVAL;
1366 mbase = musb->mregs;
1367
1368 spin_lock_irqsave(&musb->lock, flags);
1369
1370 if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) {
1371 status = -EINVAL;
1372 goto done;
1373 }
1374
1375 musb_ep_select(mbase, epnum);
1376
1377 request = next_request(musb_ep);
1378 if (value) {
1379 if (request) {
1380 dev_dbg(musb->controller, "request in progress, cannot halt %s\n",
1381 ep->name);
1382 status = -EAGAIN;
1383 goto done;
1384 }
1385 /* Cannot portably stall with non-empty FIFO */
1386 if (musb_ep->is_in) {
1387 csr = musb_readw(epio, MUSB_TXCSR);
1388 if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
1389 dev_dbg(musb->controller, "FIFO busy, cannot halt %s\n", ep->name);
1390 status = -EAGAIN;
1391 goto done;
1392 }
1393 }
1394 } else
1395 musb_ep->wedged = 0;
1396
1397 /* set/clear the stall and toggle bits */
1398 dev_dbg(musb->controller, "%s: %s stall\n", ep->name, value ? "set" : "clear");
1399 if (musb_ep->is_in) {
1400 csr = musb_readw(epio, MUSB_TXCSR);
1401 csr |= MUSB_TXCSR_P_WZC_BITS
1402 | MUSB_TXCSR_CLRDATATOG;
1403 if (value)
1404 csr |= MUSB_TXCSR_P_SENDSTALL;
1405 else
1406 csr &= ~(MUSB_TXCSR_P_SENDSTALL
1407 | MUSB_TXCSR_P_SENTSTALL);
1408 csr &= ~MUSB_TXCSR_TXPKTRDY;
1409 musb_writew(epio, MUSB_TXCSR, csr);
1410 } else {
1411 csr = musb_readw(epio, MUSB_RXCSR);
1412 csr |= MUSB_RXCSR_P_WZC_BITS
1413 | MUSB_RXCSR_FLUSHFIFO
1414 | MUSB_RXCSR_CLRDATATOG;
1415 if (value)
1416 csr |= MUSB_RXCSR_P_SENDSTALL;
1417 else
1418 csr &= ~(MUSB_RXCSR_P_SENDSTALL
1419 | MUSB_RXCSR_P_SENTSTALL);
1420 musb_writew(epio, MUSB_RXCSR, csr);
1421 }
1422
1423 /* maybe start the first request in the queue */
1424 if (!musb_ep->busy && !value && request) {
1425 dev_dbg(musb->controller, "restarting the request\n");
1426 musb_ep_restart(musb, request);
1427 }
1428
1429 done:
1430 spin_unlock_irqrestore(&musb->lock, flags);
1431 return status;
1432 }
1433
1434 /*
1435 * Sets the halt feature with the clear requests ignored
1436 */
1437 static int musb_gadget_set_wedge(struct usb_ep *ep)
1438 {
1439 struct musb_ep *musb_ep = to_musb_ep(ep);
1440
1441 if (!ep)
1442 return -EINVAL;
1443
1444 musb_ep->wedged = 1;
1445
1446 return usb_ep_set_halt(ep);
1447 }
1448
1449 static int musb_gadget_fifo_status(struct usb_ep *ep)
1450 {
1451 struct musb_ep *musb_ep = to_musb_ep(ep);
1452 void __iomem *epio = musb_ep->hw_ep->regs;
1453 int retval = -EINVAL;
1454
1455 if (musb_ep->desc && !musb_ep->is_in) {
1456 struct musb *musb = musb_ep->musb;
1457 int epnum = musb_ep->current_epnum;
1458 void __iomem *mbase = musb->mregs;
1459 unsigned long flags;
1460
1461 spin_lock_irqsave(&musb->lock, flags);
1462
1463 musb_ep_select(mbase, epnum);
1464 /* FIXME return zero unless RXPKTRDY is set */
1465 retval = musb_readw(epio, MUSB_RXCOUNT);
1466
1467 spin_unlock_irqrestore(&musb->lock, flags);
1468 }
1469 return retval;
1470 }
1471
1472 static void musb_gadget_fifo_flush(struct usb_ep *ep)
1473 {
1474 struct musb_ep *musb_ep = to_musb_ep(ep);
1475 struct musb *musb = musb_ep->musb;
1476 u8 epnum = musb_ep->current_epnum;
1477 void __iomem *epio = musb->endpoints[epnum].regs;
1478 void __iomem *mbase;
1479 unsigned long flags;
1480 u16 csr;
1481
1482 mbase = musb->mregs;
1483
1484 spin_lock_irqsave(&musb->lock, flags);
1485 musb_ep_select(mbase, (u8) epnum);
1486
1487 /* disable interrupts */
1488 musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe & ~(1 << epnum));
1489
1490 if (musb_ep->is_in) {
1491 csr = musb_readw(epio, MUSB_TXCSR);
1492 if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
1493 csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
1494 /*
1495 * Setting both TXPKTRDY and FLUSHFIFO makes controller
1496 * to interrupt current FIFO loading, but not flushing
1497 * the already loaded ones.
1498 */
1499 csr &= ~MUSB_TXCSR_TXPKTRDY;
1500 musb_writew(epio, MUSB_TXCSR, csr);
1501 /* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
1502 musb_writew(epio, MUSB_TXCSR, csr);
1503 }
1504 } else {
1505 csr = musb_readw(epio, MUSB_RXCSR);
1506 csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS;
1507 musb_writew(epio, MUSB_RXCSR, csr);
1508 musb_writew(epio, MUSB_RXCSR, csr);
1509 }
1510
1511 /* re-enable interrupt */
1512 musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe);
1513 spin_unlock_irqrestore(&musb->lock, flags);
1514 }
1515
1516 static const struct usb_ep_ops musb_ep_ops = {
1517 .enable = musb_gadget_enable,
1518 .disable = musb_gadget_disable,
1519 .alloc_request = musb_alloc_request,
1520 .free_request = musb_free_request,
1521 .queue = musb_gadget_queue,
1522 .dequeue = musb_gadget_dequeue,
1523 .set_halt = musb_gadget_set_halt,
1524 .set_wedge = musb_gadget_set_wedge,
1525 .fifo_status = musb_gadget_fifo_status,
1526 .fifo_flush = musb_gadget_fifo_flush
1527 };
1528
1529 /* ----------------------------------------------------------------------- */
1530
1531 static int musb_gadget_get_frame(struct usb_gadget *gadget)
1532 {
1533 struct musb *musb = gadget_to_musb(gadget);
1534
1535 return (int)musb_readw(musb->mregs, MUSB_FRAME);
1536 }
1537
1538 static int musb_gadget_wakeup(struct usb_gadget *gadget)
1539 {
1540 struct musb *musb = gadget_to_musb(gadget);
1541 void __iomem *mregs = musb->mregs;
1542 unsigned long flags;
1543 int status = -EINVAL;
1544 u8 power, devctl;
1545 int retries;
1546
1547 spin_lock_irqsave(&musb->lock, flags);
1548
1549 switch (musb->xceiv->state) {
1550 case OTG_STATE_B_PERIPHERAL:
1551 /* NOTE: OTG state machine doesn't include B_SUSPENDED;
1552 * that's part of the standard usb 1.1 state machine, and
1553 * doesn't affect OTG transitions.
1554 */
1555 if (musb->may_wakeup && musb->is_suspended)
1556 break;
1557 goto done;
1558 case OTG_STATE_B_IDLE:
1559 /* Start SRP ... OTG not required. */
1560 devctl = musb_readb(mregs, MUSB_DEVCTL);
1561 dev_dbg(musb->controller, "Sending SRP: devctl: %02x\n", devctl);
1562 devctl |= MUSB_DEVCTL_SESSION;
1563 musb_writeb(mregs, MUSB_DEVCTL, devctl);
1564 devctl = musb_readb(mregs, MUSB_DEVCTL);
1565 retries = 100;
1566 while (!(devctl & MUSB_DEVCTL_SESSION)) {
1567 devctl = musb_readb(mregs, MUSB_DEVCTL);
1568 if (retries-- < 1)
1569 break;
1570 }
1571 retries = 10000;
1572 while (devctl & MUSB_DEVCTL_SESSION) {
1573 devctl = musb_readb(mregs, MUSB_DEVCTL);
1574 if (retries-- < 1)
1575 break;
1576 }
1577
1578 spin_unlock_irqrestore(&musb->lock, flags);
1579 otg_start_srp(musb->xceiv->otg);
1580 spin_lock_irqsave(&musb->lock, flags);
1581
1582 /* Block idling for at least 1s */
1583 musb_platform_try_idle(musb,
1584 jiffies + msecs_to_jiffies(1 * HZ));
1585
1586 status = 0;
1587 goto done;
1588 default:
1589 dev_dbg(musb->controller, "Unhandled wake: %s\n",
1590 usb_otg_state_string(musb->xceiv->state));
1591 goto done;
1592 }
1593
1594 status = 0;
1595
1596 power = musb_readb(mregs, MUSB_POWER);
1597 power |= MUSB_POWER_RESUME;
1598 musb_writeb(mregs, MUSB_POWER, power);
1599 dev_dbg(musb->controller, "issue wakeup\n");
1600
1601 /* FIXME do this next chunk in a timer callback, no udelay */
1602 mdelay(2);
1603
1604 power = musb_readb(mregs, MUSB_POWER);
1605 power &= ~MUSB_POWER_RESUME;
1606 musb_writeb(mregs, MUSB_POWER, power);
1607 done:
1608 spin_unlock_irqrestore(&musb->lock, flags);
1609 return status;
1610 }
1611
1612 static int
1613 musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered)
1614 {
1615 struct musb *musb = gadget_to_musb(gadget);
1616
1617 musb->is_self_powered = !!is_selfpowered;
1618 return 0;
1619 }
1620
1621 static void musb_pullup(struct musb *musb, int is_on)
1622 {
1623 u8 power;
1624
1625 power = musb_readb(musb->mregs, MUSB_POWER);
1626 if (is_on)
1627 power |= MUSB_POWER_SOFTCONN;
1628 else
1629 power &= ~MUSB_POWER_SOFTCONN;
1630
1631 /* FIXME if on, HdrcStart; if off, HdrcStop */
1632
1633 dev_dbg(musb->controller, "gadget D+ pullup %s\n",
1634 is_on ? "on" : "off");
1635 musb_writeb(musb->mregs, MUSB_POWER, power);
1636 }
1637
1638 #if 0
1639 static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
1640 {
1641 dev_dbg(musb->controller, "<= %s =>\n", __func__);
1642
1643 /*
1644 * FIXME iff driver's softconnect flag is set (as it is during probe,
1645 * though that can clear it), just musb_pullup().
1646 */
1647
1648 return -EINVAL;
1649 }
1650 #endif
1651
1652 static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
1653 {
1654 struct musb *musb = gadget_to_musb(gadget);
1655
1656 if (!musb->xceiv->set_power)
1657 return -EOPNOTSUPP;
1658 return usb_phy_set_power(musb->xceiv, mA);
1659 }
1660
1661 static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
1662 {
1663 struct musb *musb = gadget_to_musb(gadget);
1664 unsigned long flags;
1665
1666 is_on = !!is_on;
1667
1668 pm_runtime_get_sync(musb->controller);
1669
1670 /* NOTE: this assumes we are sensing vbus; we'd rather
1671 * not pullup unless the B-session is active.
1672 */
1673 spin_lock_irqsave(&musb->lock, flags);
1674 if (is_on != musb->softconnect) {
1675 musb->softconnect = is_on;
1676 musb_pullup(musb, is_on);
1677 }
1678 spin_unlock_irqrestore(&musb->lock, flags);
1679
1680 pm_runtime_put(musb->controller);
1681
1682 return 0;
1683 }
1684
1685 static int musb_gadget_start(struct usb_gadget *g,
1686 struct usb_gadget_driver *driver);
1687 static int musb_gadget_stop(struct usb_gadget *g,
1688 struct usb_gadget_driver *driver);
1689
1690 static const struct usb_gadget_ops musb_gadget_operations = {
1691 .get_frame = musb_gadget_get_frame,
1692 .wakeup = musb_gadget_wakeup,
1693 .set_selfpowered = musb_gadget_set_self_powered,
1694 /* .vbus_session = musb_gadget_vbus_session, */
1695 .vbus_draw = musb_gadget_vbus_draw,
1696 .pullup = musb_gadget_pullup,
1697 .udc_start = musb_gadget_start,
1698 .udc_stop = musb_gadget_stop,
1699 };
1700
1701 /* ----------------------------------------------------------------------- */
1702
1703 /* Registration */
1704
1705 /* Only this registration code "knows" the rule (from USB standards)
1706 * about there being only one external upstream port. It assumes
1707 * all peripheral ports are external...
1708 */
1709
1710 static void
1711 init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
1712 {
1713 struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
1714
1715 memset(ep, 0, sizeof *ep);
1716
1717 ep->current_epnum = epnum;
1718 ep->musb = musb;
1719 ep->hw_ep = hw_ep;
1720 ep->is_in = is_in;
1721
1722 INIT_LIST_HEAD(&ep->req_list);
1723
1724 sprintf(ep->name, "ep%d%s", epnum,
1725 (!epnum || hw_ep->is_shared_fifo) ? "" : (
1726 is_in ? "in" : "out"));
1727 ep->end_point.name = ep->name;
1728 INIT_LIST_HEAD(&ep->end_point.ep_list);
1729 if (!epnum) {
1730 ep->end_point.maxpacket = 64;
1731 ep->end_point.ops = &musb_g_ep0_ops;
1732 musb->g.ep0 = &ep->end_point;
1733 } else {
1734 if (is_in)
1735 ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
1736 else
1737 ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
1738 ep->end_point.ops = &musb_ep_ops;
1739 list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
1740 }
1741 }
1742
1743 /*
1744 * Initialize the endpoints exposed to peripheral drivers, with backlinks
1745 * to the rest of the driver state.
1746 */
1747 static inline void musb_g_init_endpoints(struct musb *musb)
1748 {
1749 u8 epnum;
1750 struct musb_hw_ep *hw_ep;
1751 unsigned count = 0;
1752
1753 /* initialize endpoint list just once */
1754 INIT_LIST_HEAD(&(musb->g.ep_list));
1755
1756 for (epnum = 0, hw_ep = musb->endpoints;
1757 epnum < musb->nr_endpoints;
1758 epnum++, hw_ep++) {
1759 if (hw_ep->is_shared_fifo /* || !epnum */) {
1760 init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
1761 count++;
1762 } else {
1763 if (hw_ep->max_packet_sz_tx) {
1764 init_peripheral_ep(musb, &hw_ep->ep_in,
1765 epnum, 1);
1766 count++;
1767 }
1768 if (hw_ep->max_packet_sz_rx) {
1769 init_peripheral_ep(musb, &hw_ep->ep_out,
1770 epnum, 0);
1771 count++;
1772 }
1773 }
1774 }
1775 }
1776
1777 /* called once during driver setup to initialize and link into
1778 * the driver model; memory is zeroed.
1779 */
1780 int musb_gadget_setup(struct musb *musb)
1781 {
1782 int status;
1783
1784 /* REVISIT minor race: if (erroneously) setting up two
1785 * musb peripherals at the same time, only the bus lock
1786 * is probably held.
1787 */
1788
1789 musb->g.ops = &musb_gadget_operations;
1790 musb->g.max_speed = USB_SPEED_HIGH;
1791 musb->g.speed = USB_SPEED_UNKNOWN;
1792
1793 MUSB_DEV_MODE(musb);
1794 musb->xceiv->otg->default_a = 0;
1795 musb->xceiv->state = OTG_STATE_B_IDLE;
1796
1797 /* this "gadget" abstracts/virtualizes the controller */
1798 musb->g.name = musb_driver_name;
1799 musb->g.is_otg = 1;
1800
1801 musb_g_init_endpoints(musb);
1802
1803 musb->is_active = 0;
1804 musb_platform_try_idle(musb, 0);
1805
1806 status = usb_add_gadget_udc(musb->controller, &musb->g);
1807 if (status)
1808 goto err;
1809
1810 return 0;
1811 err:
1812 musb->g.dev.parent = NULL;
1813 device_unregister(&musb->g.dev);
1814 return status;
1815 }
1816
1817 void musb_gadget_cleanup(struct musb *musb)
1818 {
1819 if (musb->port_mode == MUSB_PORT_MODE_HOST)
1820 return;
1821 usb_del_gadget_udc(&musb->g);
1822 }
1823
1824 /*
1825 * Register the gadget driver. Used by gadget drivers when
1826 * registering themselves with the controller.
1827 *
1828 * -EINVAL something went wrong (not driver)
1829 * -EBUSY another gadget is already using the controller
1830 * -ENOMEM no memory to perform the operation
1831 *
1832 * @param driver the gadget driver
1833 * @return <0 if error, 0 if everything is fine
1834 */
1835 static int musb_gadget_start(struct usb_gadget *g,
1836 struct usb_gadget_driver *driver)
1837 {
1838 struct musb *musb = gadget_to_musb(g);
1839 struct usb_otg *otg = musb->xceiv->otg;
1840 unsigned long flags;
1841 int retval = 0;
1842
1843 if (driver->max_speed < USB_SPEED_HIGH) {
1844 retval = -EINVAL;
1845 goto err;
1846 }
1847
1848 pm_runtime_get_sync(musb->controller);
1849
1850 dev_dbg(musb->controller, "registering driver %s\n", driver->function);
1851
1852 musb->softconnect = 0;
1853 musb->gadget_driver = driver;
1854
1855 spin_lock_irqsave(&musb->lock, flags);
1856 musb->is_active = 1;
1857
1858 otg_set_peripheral(otg, &musb->g);
1859 musb->xceiv->state = OTG_STATE_B_IDLE;
1860 spin_unlock_irqrestore(&musb->lock, flags);
1861
1862 musb_start(musb);
1863
1864 /* REVISIT: funcall to other code, which also
1865 * handles power budgeting ... this way also
1866 * ensures HdrcStart is indirectly called.
1867 */
1868 if (musb->xceiv->last_event == USB_EVENT_ID)
1869 musb_platform_set_vbus(musb, 1);
1870
1871 if (musb->xceiv->last_event == USB_EVENT_NONE)
1872 pm_runtime_put(musb->controller);
1873
1874 return 0;
1875
1876 err:
1877 return retval;
1878 }
1879
1880 static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
1881 {
1882 int i;
1883 struct musb_hw_ep *hw_ep;
1884
1885 /* don't disconnect if it's not connected */
1886 if (musb->g.speed == USB_SPEED_UNKNOWN)
1887 driver = NULL;
1888 else
1889 musb->g.speed = USB_SPEED_UNKNOWN;
1890
1891 /* deactivate the hardware */
1892 if (musb->softconnect) {
1893 musb->softconnect = 0;
1894 musb_pullup(musb, 0);
1895 }
1896 musb_stop(musb);
1897
1898 /* killing any outstanding requests will quiesce the driver;
1899 * then report disconnect
1900 */
1901 if (driver) {
1902 for (i = 0, hw_ep = musb->endpoints;
1903 i < musb->nr_endpoints;
1904 i++, hw_ep++) {
1905 musb_ep_select(musb->mregs, i);
1906 if (hw_ep->is_shared_fifo /* || !epnum */) {
1907 nuke(&hw_ep->ep_in, -ESHUTDOWN);
1908 } else {
1909 if (hw_ep->max_packet_sz_tx)
1910 nuke(&hw_ep->ep_in, -ESHUTDOWN);
1911 if (hw_ep->max_packet_sz_rx)
1912 nuke(&hw_ep->ep_out, -ESHUTDOWN);
1913 }
1914 }
1915 }
1916 }
1917
1918 /*
1919 * Unregister the gadget driver. Used by gadget drivers when
1920 * unregistering themselves from the controller.
1921 *
1922 * @param driver the gadget driver to unregister
1923 */
1924 static int musb_gadget_stop(struct usb_gadget *g,
1925 struct usb_gadget_driver *driver)
1926 {
1927 struct musb *musb = gadget_to_musb(g);
1928 unsigned long flags;
1929
1930 if (musb->xceiv->last_event == USB_EVENT_NONE)
1931 pm_runtime_get_sync(musb->controller);
1932
1933 /*
1934 * REVISIT always use otg_set_peripheral() here too;
1935 * this needs to shut down the OTG engine.
1936 */
1937
1938 spin_lock_irqsave(&musb->lock, flags);
1939
1940 musb_hnp_stop(musb);
1941
1942 (void) musb_gadget_vbus_draw(&musb->g, 0);
1943
1944 musb->xceiv->state = OTG_STATE_UNDEFINED;
1945 stop_activity(musb, driver);
1946 otg_set_peripheral(musb->xceiv->otg, NULL);
1947
1948 dev_dbg(musb->controller, "unregistering driver %s\n",
1949 driver ? driver->function : "(removed)");
1950
1951 musb->is_active = 0;
1952 musb->gadget_driver = NULL;
1953 musb_platform_try_idle(musb, 0);
1954 spin_unlock_irqrestore(&musb->lock, flags);
1955
1956 /*
1957 * FIXME we need to be able to register another
1958 * gadget driver here and have everything work;
1959 * that currently misbehaves.
1960 */
1961
1962 pm_runtime_put(musb->controller);
1963
1964 return 0;
1965 }
1966
1967 /* ----------------------------------------------------------------------- */
1968
1969 /* lifecycle operations called through plat_uds.c */
1970
1971 void musb_g_resume(struct musb *musb)
1972 {
1973 musb->is_suspended = 0;
1974 switch (musb->xceiv->state) {
1975 case OTG_STATE_B_IDLE:
1976 break;
1977 case OTG_STATE_B_WAIT_ACON:
1978 case OTG_STATE_B_PERIPHERAL:
1979 musb->is_active = 1;
1980 if (musb->gadget_driver && musb->gadget_driver->resume) {
1981 spin_unlock(&musb->lock);
1982 musb->gadget_driver->resume(&musb->g);
1983 spin_lock(&musb->lock);
1984 }
1985 break;
1986 default:
1987 WARNING("unhandled RESUME transition (%s)\n",
1988 usb_otg_state_string(musb->xceiv->state));
1989 }
1990 }
1991
1992 /* called when SOF packets stop for 3+ msec */
1993 void musb_g_suspend(struct musb *musb)
1994 {
1995 u8 devctl;
1996
1997 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1998 dev_dbg(musb->controller, "devctl %02x\n", devctl);
1999
2000 switch (musb->xceiv->state) {
2001 case OTG_STATE_B_IDLE:
2002 if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
2003 musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
2004 break;
2005 case OTG_STATE_B_PERIPHERAL:
2006 musb->is_suspended = 1;
2007 if (musb->gadget_driver && musb->gadget_driver->suspend) {
2008 spin_unlock(&musb->lock);
2009 musb->gadget_driver->suspend(&musb->g);
2010 spin_lock(&musb->lock);
2011 }
2012 break;
2013 default:
2014 /* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
2015 * A_PERIPHERAL may need care too
2016 */
2017 WARNING("unhandled SUSPEND transition (%s)\n",
2018 usb_otg_state_string(musb->xceiv->state));
2019 }
2020 }
2021
2022 /* Called during SRP */
2023 void musb_g_wakeup(struct musb *musb)
2024 {
2025 musb_gadget_wakeup(&musb->g);
2026 }
2027
2028 /* called when VBUS drops below session threshold, and in other cases */
2029 void musb_g_disconnect(struct musb *musb)
2030 {
2031 void __iomem *mregs = musb->mregs;
2032 u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
2033
2034 dev_dbg(musb->controller, "devctl %02x\n", devctl);
2035
2036 /* clear HR */
2037 musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
2038
2039 /* don't draw vbus until new b-default session */
2040 (void) musb_gadget_vbus_draw(&musb->g, 0);
2041
2042 musb->g.speed = USB_SPEED_UNKNOWN;
2043 if (musb->gadget_driver && musb->gadget_driver->disconnect) {
2044 spin_unlock(&musb->lock);
2045 musb->gadget_driver->disconnect(&musb->g);
2046 spin_lock(&musb->lock);
2047 }
2048
2049 switch (musb->xceiv->state) {
2050 default:
2051 dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n",
2052 usb_otg_state_string(musb->xceiv->state));
2053 musb->xceiv->state = OTG_STATE_A_IDLE;
2054 MUSB_HST_MODE(musb);
2055 break;
2056 case OTG_STATE_A_PERIPHERAL:
2057 musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
2058 MUSB_HST_MODE(musb);
2059 break;
2060 case OTG_STATE_B_WAIT_ACON:
2061 case OTG_STATE_B_HOST:
2062 case OTG_STATE_B_PERIPHERAL:
2063 case OTG_STATE_B_IDLE:
2064 musb->xceiv->state = OTG_STATE_B_IDLE;
2065 break;
2066 case OTG_STATE_B_SRP_INIT:
2067 break;
2068 }
2069
2070 musb->is_active = 0;
2071 }
2072
2073 void musb_g_reset(struct musb *musb)
2074 __releases(musb->lock)
2075 __acquires(musb->lock)
2076 {
2077 void __iomem *mbase = musb->mregs;
2078 u8 devctl = musb_readb(mbase, MUSB_DEVCTL);
2079 u8 power;
2080
2081 dev_dbg(musb->controller, "<== %s driver '%s'\n",
2082 (devctl & MUSB_DEVCTL_BDEVICE)
2083 ? "B-Device" : "A-Device",
2084 musb->gadget_driver
2085 ? musb->gadget_driver->driver.name
2086 : NULL
2087 );
2088
2089 /* report disconnect, if we didn't already (flushing EP state) */
2090 if (musb->g.speed != USB_SPEED_UNKNOWN)
2091 musb_g_disconnect(musb);
2092
2093 /* clear HR */
2094 else if (devctl & MUSB_DEVCTL_HR)
2095 musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
2096
2097
2098 /* what speed did we negotiate? */
2099 power = musb_readb(mbase, MUSB_POWER);
2100 musb->g.speed = (power & MUSB_POWER_HSMODE)
2101 ? USB_SPEED_HIGH : USB_SPEED_FULL;
2102
2103 /* start in USB_STATE_DEFAULT */
2104 musb->is_active = 1;
2105 musb->is_suspended = 0;
2106 MUSB_DEV_MODE(musb);
2107 musb->address = 0;
2108 musb->ep0_state = MUSB_EP0_STAGE_SETUP;
2109
2110 musb->may_wakeup = 0;
2111 musb->g.b_hnp_enable = 0;
2112 musb->g.a_alt_hnp_support = 0;
2113 musb->g.a_hnp_support = 0;
2114
2115 /* Normal reset, as B-Device;
2116 * or else after HNP, as A-Device
2117 */
2118 if (devctl & MUSB_DEVCTL_BDEVICE) {
2119 musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
2120 musb->g.is_a_peripheral = 0;
2121 } else {
2122 musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
2123 musb->g.is_a_peripheral = 1;
2124 }
2125
2126 /* start with default limits on VBUS power draw */
2127 (void) musb_gadget_vbus_draw(&musb->g, 8);
2128 }
Linus' kernel tree