2 * Copyright 2004 James Cleverdon, IBM.
3 * Subject to the GNU Public License, v.2
5 * Flat APIC subarch code.
7 * Hacked for x86-64 by James Cleverdon from i386 architecture code by
8 * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
11 #include <linux/errno.h>
12 #include <linux/threads.h>
13 #include <linux/cpumask.h>
14 #include <linux/string.h>
15 #include <linux/kernel.h>
16 #include <linux/ctype.h>
17 #include <linux/init.h>
18 #include <linux/hardirq.h>
24 #include <acpi/acpi_bus.h>
27 static int flat_acpi_madt_oem_check(char *oem_id
, char *oem_table_id
)
32 static const struct cpumask
*flat_target_cpus(void)
34 return cpu_online_mask
;
37 static void flat_vector_allocation_domain(int cpu
, struct cpumask
*retmask
)
39 /* Careful. Some cpus do not strictly honor the set of cpus
40 * specified in the interrupt destination when using lowest
41 * priority interrupt delivery mode.
43 * In particular there was a hyperthreading cpu observed to
44 * deliver interrupts to the wrong hyperthread when only one
45 * hyperthread was specified in the interrupt desitination.
47 cpumask_clear(retmask
);
48 cpumask_bits(retmask
)[0] = APIC_ALL_CPUS
;
52 * Set up the logical destination ID.
54 * Intel recommends to set DFR, LDR and TPR before enabling
55 * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
56 * document number 292116). So here it goes...
58 static void flat_init_apic_ldr(void)
61 unsigned long num
, id
;
63 num
= smp_processor_id();
65 apic_write(APIC_DFR
, APIC_DFR_FLAT
);
66 val
= apic_read(APIC_LDR
) & ~APIC_LDR_MASK
;
67 val
|= SET_APIC_LOGICAL_ID(id
);
68 apic_write(APIC_LDR
, val
);
71 static inline void _flat_send_IPI_mask(unsigned long mask
, int vector
)
75 local_irq_save(flags
);
76 __default_send_IPI_dest_field(mask
, vector
, apic
->dest_logical
);
77 local_irq_restore(flags
);
80 static void flat_send_IPI_mask(const struct cpumask
*cpumask
, int vector
)
82 unsigned long mask
= cpumask_bits(cpumask
)[0];
84 _flat_send_IPI_mask(mask
, vector
);
88 flat_send_IPI_mask_allbutself(const struct cpumask
*cpumask
, int vector
)
90 unsigned long mask
= cpumask_bits(cpumask
)[0];
91 int cpu
= smp_processor_id();
93 if (cpu
< BITS_PER_LONG
)
94 clear_bit(cpu
, &mask
);
96 _flat_send_IPI_mask(mask
, vector
);
99 static void flat_send_IPI_allbutself(int vector
)
101 int cpu
= smp_processor_id();
102 #ifdef CONFIG_HOTPLUG_CPU
107 if (hotplug
|| vector
== NMI_VECTOR
) {
108 if (!cpumask_equal(cpu_online_mask
, cpumask_of(cpu
))) {
109 unsigned long mask
= cpumask_bits(cpu_online_mask
)[0];
111 if (cpu
< BITS_PER_LONG
)
112 clear_bit(cpu
, &mask
);
114 _flat_send_IPI_mask(mask
, vector
);
116 } else if (num_online_cpus() > 1) {
117 __default_send_IPI_shortcut(APIC_DEST_ALLBUT
,
118 vector
, apic
->dest_logical
);
122 static void flat_send_IPI_all(int vector
)
124 if (vector
== NMI_VECTOR
) {
125 flat_send_IPI_mask(cpu_online_mask
, vector
);
127 __default_send_IPI_shortcut(APIC_DEST_ALLINC
,
128 vector
, apic
->dest_logical
);
132 static unsigned int flat_get_apic_id(unsigned long x
)
136 id
= (((x
)>>24) & 0xFFu
);
141 static unsigned long set_apic_id(unsigned int id
)
145 x
= ((id
& 0xFFu
)<<24);
149 static unsigned int read_xapic_id(void)
153 id
= flat_get_apic_id(apic_read(APIC_ID
));
157 static int flat_apic_id_registered(void)
159 return physid_isset(read_xapic_id(), phys_cpu_present_map
);
162 static int flat_phys_pkg_id(int initial_apic_id
, int index_msb
)
164 return initial_apic_id
>> index_msb
;
167 struct apic apic_flat
= {
170 .acpi_madt_oem_check
= flat_acpi_madt_oem_check
,
171 .apic_id_registered
= flat_apic_id_registered
,
173 .irq_delivery_mode
= dest_LowestPrio
,
174 .irq_dest_mode
= 1, /* logical */
176 .target_cpus
= flat_target_cpus
,
178 .dest_logical
= APIC_DEST_LOGICAL
,
179 .check_apicid_used
= NULL
,
180 .check_apicid_present
= NULL
,
182 .vector_allocation_domain
= flat_vector_allocation_domain
,
183 .init_apic_ldr
= flat_init_apic_ldr
,
185 .ioapic_phys_id_map
= NULL
,
186 .setup_apic_routing
= NULL
,
187 .multi_timer_check
= NULL
,
188 .cpu_present_to_apicid
= default_cpu_present_to_apicid
,
189 .apicid_to_cpu_present
= NULL
,
190 .setup_portio_remap
= NULL
,
191 .check_phys_apicid_present
= default_check_phys_apicid_present
,
192 .enable_apic_mode
= NULL
,
193 .phys_pkg_id
= flat_phys_pkg_id
,
194 .mps_oem_check
= NULL
,
196 .get_apic_id
= flat_get_apic_id
,
197 .set_apic_id
= set_apic_id
,
198 .apic_id_mask
= 0xFFu
<< 24,
200 .cpu_mask_to_apicid
= default_cpu_mask_to_apicid
,
201 .cpu_mask_to_apicid_and
= default_cpu_mask_to_apicid_and
,
203 .send_IPI_mask
= flat_send_IPI_mask
,
204 .send_IPI_mask_allbutself
= flat_send_IPI_mask_allbutself
,
205 .send_IPI_allbutself
= flat_send_IPI_allbutself
,
206 .send_IPI_all
= flat_send_IPI_all
,
207 .send_IPI_self
= apic_send_IPI_self
,
209 .trampoline_phys_low
= DEFAULT_TRAMPOLINE_PHYS_LOW
,
210 .trampoline_phys_high
= DEFAULT_TRAMPOLINE_PHYS_HIGH
,
211 .wait_for_init_deassert
= NULL
,
212 .smp_callin_clear_local_apic
= NULL
,
213 .inquire_remote_apic
= default_inquire_remote_apic
,
215 .read
= native_apic_mem_read
,
216 .write
= native_apic_mem_write
,
217 .icr_read
= native_apic_icr_read
,
218 .icr_write
= native_apic_icr_write
,
219 .wait_icr_idle
= native_apic_wait_icr_idle
,
220 .safe_wait_icr_idle
= native_safe_apic_wait_icr_idle
,
224 * Physflat mode is used when there are more than 8 CPUs on a system.
225 * We cannot use logical delivery in this case because the mask
226 * overflows, so use physical mode.
228 static int physflat_acpi_madt_oem_check(char *oem_id
, char *oem_table_id
)
232 * Quirk: some x86_64 machines can only use physical APIC mode
233 * regardless of how many processors are present (x86_64 ES7000
236 if (acpi_gbl_FADT
.header
.revision
>= FADT2_REVISION_ID
&&
237 (acpi_gbl_FADT
.flags
& ACPI_FADT_APIC_PHYSICAL
)) {
238 printk(KERN_DEBUG
"system APIC only can use physical flat");
242 if (!strncmp(oem_id
, "IBM", 3) && !strncmp(oem_table_id
, "EXA", 3)) {
243 printk(KERN_DEBUG
"IBM Summit detected, will use apic physical");
251 static const struct cpumask
*physflat_target_cpus(void)
253 return cpu_online_mask
;
256 static void physflat_vector_allocation_domain(int cpu
, struct cpumask
*retmask
)
258 cpumask_clear(retmask
);
259 cpumask_set_cpu(cpu
, retmask
);
262 static void physflat_send_IPI_mask(const struct cpumask
*cpumask
, int vector
)
264 default_send_IPI_mask_sequence_phys(cpumask
, vector
);
267 static void physflat_send_IPI_mask_allbutself(const struct cpumask
*cpumask
,
270 default_send_IPI_mask_allbutself_phys(cpumask
, vector
);
273 static void physflat_send_IPI_allbutself(int vector
)
275 default_send_IPI_mask_allbutself_phys(cpu_online_mask
, vector
);
278 static void physflat_send_IPI_all(int vector
)
280 physflat_send_IPI_mask(cpu_online_mask
, vector
);
283 static unsigned int physflat_cpu_mask_to_apicid(const struct cpumask
*cpumask
)
288 * We're using fixed IRQ delivery, can only return one phys APIC ID.
289 * May as well be the first.
291 cpu
= cpumask_first(cpumask
);
292 if ((unsigned)cpu
< nr_cpu_ids
)
293 return per_cpu(x86_cpu_to_apicid
, cpu
);
299 physflat_cpu_mask_to_apicid_and(const struct cpumask
*cpumask
,
300 const struct cpumask
*andmask
)
305 * We're using fixed IRQ delivery, can only return one phys APIC ID.
306 * May as well be the first.
308 for_each_cpu_and(cpu
, cpumask
, andmask
) {
309 if (cpumask_test_cpu(cpu
, cpu_online_mask
))
312 return per_cpu(x86_cpu_to_apicid
, cpu
);
315 struct apic apic_physflat
= {
317 .name
= "physical flat",
319 .acpi_madt_oem_check
= physflat_acpi_madt_oem_check
,
320 .apic_id_registered
= flat_apic_id_registered
,
322 .irq_delivery_mode
= dest_Fixed
,
323 .irq_dest_mode
= 0, /* physical */
325 .target_cpus
= physflat_target_cpus
,
328 .check_apicid_used
= NULL
,
329 .check_apicid_present
= NULL
,
331 .vector_allocation_domain
= physflat_vector_allocation_domain
,
332 /* not needed, but shouldn't hurt: */
333 .init_apic_ldr
= flat_init_apic_ldr
,
335 .ioapic_phys_id_map
= NULL
,
336 .setup_apic_routing
= NULL
,
337 .multi_timer_check
= NULL
,
338 .cpu_present_to_apicid
= default_cpu_present_to_apicid
,
339 .apicid_to_cpu_present
= NULL
,
340 .setup_portio_remap
= NULL
,
341 .check_phys_apicid_present
= default_check_phys_apicid_present
,
342 .enable_apic_mode
= NULL
,
343 .phys_pkg_id
= flat_phys_pkg_id
,
344 .mps_oem_check
= NULL
,
346 .get_apic_id
= flat_get_apic_id
,
347 .set_apic_id
= set_apic_id
,
348 .apic_id_mask
= 0xFFu
<< 24,
350 .cpu_mask_to_apicid
= physflat_cpu_mask_to_apicid
,
351 .cpu_mask_to_apicid_and
= physflat_cpu_mask_to_apicid_and
,
353 .send_IPI_mask
= physflat_send_IPI_mask
,
354 .send_IPI_mask_allbutself
= physflat_send_IPI_mask_allbutself
,
355 .send_IPI_allbutself
= physflat_send_IPI_allbutself
,
356 .send_IPI_all
= physflat_send_IPI_all
,
357 .send_IPI_self
= apic_send_IPI_self
,
359 .trampoline_phys_low
= DEFAULT_TRAMPOLINE_PHYS_LOW
,
360 .trampoline_phys_high
= DEFAULT_TRAMPOLINE_PHYS_HIGH
,
361 .wait_for_init_deassert
= NULL
,
362 .smp_callin_clear_local_apic
= NULL
,
363 .inquire_remote_apic
= default_inquire_remote_apic
,
365 .read
= native_apic_mem_read
,
366 .write
= native_apic_mem_write
,
367 .icr_read
= native_apic_icr_read
,
368 .icr_write
= native_apic_icr_write
,
369 .wait_icr_idle
= native_apic_wait_icr_idle
,
370 .safe_wait_icr_idle
= native_safe_apic_wait_icr_idle
,