mac80211: move aMPDU RX reorder code
[linux-2.6.git] / net / mac80211 / cfg.c
blob93ee1fd5c08dd6674152072e9045c48cb0863663
1 /*
2 * mac80211 configuration hooks for cfg80211
4 * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
6 * This file is GPLv2 as found in COPYING.
7 */
9 #include <linux/ieee80211.h>
10 #include <linux/nl80211.h>
11 #include <linux/rtnetlink.h>
12 #include <net/net_namespace.h>
13 #include <linux/rcupdate.h>
14 #include <net/cfg80211.h>
15 #include "ieee80211_i.h"
16 #include "driver-ops.h"
17 #include "cfg.h"
18 #include "rate.h"
19 #include "mesh.h"
21 static bool nl80211_type_check(enum nl80211_iftype type)
23 switch (type) {
24 case NL80211_IFTYPE_ADHOC:
25 case NL80211_IFTYPE_STATION:
26 case NL80211_IFTYPE_MONITOR:
27 #ifdef CONFIG_MAC80211_MESH
28 case NL80211_IFTYPE_MESH_POINT:
29 #endif
30 case NL80211_IFTYPE_AP:
31 case NL80211_IFTYPE_AP_VLAN:
32 case NL80211_IFTYPE_WDS:
33 return true;
34 default:
35 return false;
39 static bool nl80211_params_check(enum nl80211_iftype type,
40 struct vif_params *params)
42 if (!nl80211_type_check(type))
43 return false;
45 return true;
48 static int ieee80211_add_iface(struct wiphy *wiphy, char *name,
49 enum nl80211_iftype type, u32 *flags,
50 struct vif_params *params)
52 struct ieee80211_local *local = wiphy_priv(wiphy);
53 struct net_device *dev;
54 struct ieee80211_sub_if_data *sdata;
55 int err;
57 if (!nl80211_params_check(type, params))
58 return -EINVAL;
60 err = ieee80211_if_add(local, name, &dev, type, params);
61 if (err || type != NL80211_IFTYPE_MONITOR || !flags)
62 return err;
64 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
65 sdata->u.mntr_flags = *flags;
66 return 0;
69 static int ieee80211_del_iface(struct wiphy *wiphy, struct net_device *dev)
71 ieee80211_if_remove(IEEE80211_DEV_TO_SUB_IF(dev));
73 return 0;
76 static int ieee80211_change_iface(struct wiphy *wiphy,
77 struct net_device *dev,
78 enum nl80211_iftype type, u32 *flags,
79 struct vif_params *params)
81 struct ieee80211_sub_if_data *sdata;
82 int ret;
84 if (netif_running(dev))
85 return -EBUSY;
87 if (!nl80211_params_check(type, params))
88 return -EINVAL;
90 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
92 ret = ieee80211_if_change_type(sdata, type);
93 if (ret)
94 return ret;
96 if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
97 ieee80211_sdata_set_mesh_id(sdata,
98 params->mesh_id_len,
99 params->mesh_id);
101 if (sdata->vif.type != NL80211_IFTYPE_MONITOR || !flags)
102 return 0;
104 if (type == NL80211_IFTYPE_AP_VLAN &&
105 params && params->use_4addr == 0)
106 rcu_assign_pointer(sdata->u.vlan.sta, NULL);
107 else if (type == NL80211_IFTYPE_STATION &&
108 params && params->use_4addr >= 0)
109 sdata->u.mgd.use_4addr = params->use_4addr;
111 sdata->u.mntr_flags = *flags;
112 return 0;
115 static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
116 u8 key_idx, const u8 *mac_addr,
117 struct key_params *params)
119 struct ieee80211_sub_if_data *sdata;
120 struct sta_info *sta = NULL;
121 enum ieee80211_key_alg alg;
122 struct ieee80211_key *key;
123 int err;
125 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
127 switch (params->cipher) {
128 case WLAN_CIPHER_SUITE_WEP40:
129 case WLAN_CIPHER_SUITE_WEP104:
130 alg = ALG_WEP;
131 break;
132 case WLAN_CIPHER_SUITE_TKIP:
133 alg = ALG_TKIP;
134 break;
135 case WLAN_CIPHER_SUITE_CCMP:
136 alg = ALG_CCMP;
137 break;
138 case WLAN_CIPHER_SUITE_AES_CMAC:
139 alg = ALG_AES_CMAC;
140 break;
141 default:
142 return -EINVAL;
145 key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key,
146 params->seq_len, params->seq);
147 if (!key)
148 return -ENOMEM;
150 rcu_read_lock();
152 if (mac_addr) {
153 sta = sta_info_get(sdata->local, mac_addr);
154 if (!sta) {
155 ieee80211_key_free(key);
156 err = -ENOENT;
157 goto out_unlock;
161 ieee80211_key_link(key, sdata, sta);
163 err = 0;
164 out_unlock:
165 rcu_read_unlock();
167 return err;
170 static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
171 u8 key_idx, const u8 *mac_addr)
173 struct ieee80211_sub_if_data *sdata;
174 struct sta_info *sta;
175 int ret;
177 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
179 rcu_read_lock();
181 if (mac_addr) {
182 ret = -ENOENT;
184 sta = sta_info_get(sdata->local, mac_addr);
185 if (!sta)
186 goto out_unlock;
188 if (sta->key) {
189 ieee80211_key_free(sta->key);
190 WARN_ON(sta->key);
191 ret = 0;
194 goto out_unlock;
197 if (!sdata->keys[key_idx]) {
198 ret = -ENOENT;
199 goto out_unlock;
202 ieee80211_key_free(sdata->keys[key_idx]);
203 WARN_ON(sdata->keys[key_idx]);
205 ret = 0;
206 out_unlock:
207 rcu_read_unlock();
209 return ret;
212 static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
213 u8 key_idx, const u8 *mac_addr, void *cookie,
214 void (*callback)(void *cookie,
215 struct key_params *params))
217 struct ieee80211_sub_if_data *sdata;
218 struct sta_info *sta = NULL;
219 u8 seq[6] = {0};
220 struct key_params params;
221 struct ieee80211_key *key;
222 u32 iv32;
223 u16 iv16;
224 int err = -ENOENT;
226 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
228 rcu_read_lock();
230 if (mac_addr) {
231 sta = sta_info_get(sdata->local, mac_addr);
232 if (!sta)
233 goto out;
235 key = sta->key;
236 } else
237 key = sdata->keys[key_idx];
239 if (!key)
240 goto out;
242 memset(&params, 0, sizeof(params));
244 switch (key->conf.alg) {
245 case ALG_TKIP:
246 params.cipher = WLAN_CIPHER_SUITE_TKIP;
248 iv32 = key->u.tkip.tx.iv32;
249 iv16 = key->u.tkip.tx.iv16;
251 if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)
252 drv_get_tkip_seq(sdata->local,
253 key->conf.hw_key_idx,
254 &iv32, &iv16);
256 seq[0] = iv16 & 0xff;
257 seq[1] = (iv16 >> 8) & 0xff;
258 seq[2] = iv32 & 0xff;
259 seq[3] = (iv32 >> 8) & 0xff;
260 seq[4] = (iv32 >> 16) & 0xff;
261 seq[5] = (iv32 >> 24) & 0xff;
262 params.seq = seq;
263 params.seq_len = 6;
264 break;
265 case ALG_CCMP:
266 params.cipher = WLAN_CIPHER_SUITE_CCMP;
267 seq[0] = key->u.ccmp.tx_pn[5];
268 seq[1] = key->u.ccmp.tx_pn[4];
269 seq[2] = key->u.ccmp.tx_pn[3];
270 seq[3] = key->u.ccmp.tx_pn[2];
271 seq[4] = key->u.ccmp.tx_pn[1];
272 seq[5] = key->u.ccmp.tx_pn[0];
273 params.seq = seq;
274 params.seq_len = 6;
275 break;
276 case ALG_WEP:
277 if (key->conf.keylen == 5)
278 params.cipher = WLAN_CIPHER_SUITE_WEP40;
279 else
280 params.cipher = WLAN_CIPHER_SUITE_WEP104;
281 break;
282 case ALG_AES_CMAC:
283 params.cipher = WLAN_CIPHER_SUITE_AES_CMAC;
284 seq[0] = key->u.aes_cmac.tx_pn[5];
285 seq[1] = key->u.aes_cmac.tx_pn[4];
286 seq[2] = key->u.aes_cmac.tx_pn[3];
287 seq[3] = key->u.aes_cmac.tx_pn[2];
288 seq[4] = key->u.aes_cmac.tx_pn[1];
289 seq[5] = key->u.aes_cmac.tx_pn[0];
290 params.seq = seq;
291 params.seq_len = 6;
292 break;
295 params.key = key->conf.key;
296 params.key_len = key->conf.keylen;
298 callback(cookie, &params);
299 err = 0;
301 out:
302 rcu_read_unlock();
303 return err;
306 static int ieee80211_config_default_key(struct wiphy *wiphy,
307 struct net_device *dev,
308 u8 key_idx)
310 struct ieee80211_sub_if_data *sdata;
312 rcu_read_lock();
314 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
315 ieee80211_set_default_key(sdata, key_idx);
317 rcu_read_unlock();
319 return 0;
322 static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy,
323 struct net_device *dev,
324 u8 key_idx)
326 struct ieee80211_sub_if_data *sdata;
328 rcu_read_lock();
330 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
331 ieee80211_set_default_mgmt_key(sdata, key_idx);
333 rcu_read_unlock();
335 return 0;
338 static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
340 struct ieee80211_sub_if_data *sdata = sta->sdata;
342 sinfo->generation = sdata->local->sta_generation;
344 sinfo->filled = STATION_INFO_INACTIVE_TIME |
345 STATION_INFO_RX_BYTES |
346 STATION_INFO_TX_BYTES |
347 STATION_INFO_RX_PACKETS |
348 STATION_INFO_TX_PACKETS |
349 STATION_INFO_TX_BITRATE;
351 sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
352 sinfo->rx_bytes = sta->rx_bytes;
353 sinfo->tx_bytes = sta->tx_bytes;
354 sinfo->rx_packets = sta->rx_packets;
355 sinfo->tx_packets = sta->tx_packets;
357 if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
358 sinfo->filled |= STATION_INFO_SIGNAL;
359 sinfo->signal = (s8)sta->last_signal;
362 sinfo->txrate.flags = 0;
363 if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)
364 sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
365 if (sta->last_tx_rate.flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
366 sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
367 if (sta->last_tx_rate.flags & IEEE80211_TX_RC_SHORT_GI)
368 sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
370 if (!(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) {
371 struct ieee80211_supported_band *sband;
372 sband = sta->local->hw.wiphy->bands[
373 sta->local->hw.conf.channel->band];
374 sinfo->txrate.legacy =
375 sband->bitrates[sta->last_tx_rate.idx].bitrate;
376 } else
377 sinfo->txrate.mcs = sta->last_tx_rate.idx;
379 if (ieee80211_vif_is_mesh(&sdata->vif)) {
380 #ifdef CONFIG_MAC80211_MESH
381 sinfo->filled |= STATION_INFO_LLID |
382 STATION_INFO_PLID |
383 STATION_INFO_PLINK_STATE;
385 sinfo->llid = le16_to_cpu(sta->llid);
386 sinfo->plid = le16_to_cpu(sta->plid);
387 sinfo->plink_state = sta->plink_state;
388 #endif
393 static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
394 int idx, u8 *mac, struct station_info *sinfo)
396 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
397 struct sta_info *sta;
398 int ret = -ENOENT;
400 rcu_read_lock();
402 sta = sta_info_get_by_idx(sdata, idx);
403 if (sta) {
404 ret = 0;
405 memcpy(mac, sta->sta.addr, ETH_ALEN);
406 sta_set_sinfo(sta, sinfo);
409 rcu_read_unlock();
411 return ret;
414 static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
415 u8 *mac, struct station_info *sinfo)
417 struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
418 struct sta_info *sta;
419 int ret = -ENOENT;
421 rcu_read_lock();
423 /* XXX: verify sta->dev == dev */
425 sta = sta_info_get(local, mac);
426 if (sta) {
427 ret = 0;
428 sta_set_sinfo(sta, sinfo);
431 rcu_read_unlock();
433 return ret;
437 * This handles both adding a beacon and setting new beacon info
439 static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
440 struct beacon_parameters *params)
442 struct beacon_data *new, *old;
443 int new_head_len, new_tail_len;
444 int size;
445 int err = -EINVAL;
447 old = sdata->u.ap.beacon;
449 /* head must not be zero-length */
450 if (params->head && !params->head_len)
451 return -EINVAL;
454 * This is a kludge. beacon interval should really be part
455 * of the beacon information.
457 if (params->interval &&
458 (sdata->vif.bss_conf.beacon_int != params->interval)) {
459 sdata->vif.bss_conf.beacon_int = params->interval;
460 ieee80211_bss_info_change_notify(sdata,
461 BSS_CHANGED_BEACON_INT);
464 /* Need to have a beacon head if we don't have one yet */
465 if (!params->head && !old)
466 return err;
468 /* sorry, no way to start beaconing without dtim period */
469 if (!params->dtim_period && !old)
470 return err;
472 /* new or old head? */
473 if (params->head)
474 new_head_len = params->head_len;
475 else
476 new_head_len = old->head_len;
478 /* new or old tail? */
479 if (params->tail || !old)
480 /* params->tail_len will be zero for !params->tail */
481 new_tail_len = params->tail_len;
482 else
483 new_tail_len = old->tail_len;
485 size = sizeof(*new) + new_head_len + new_tail_len;
487 new = kzalloc(size, GFP_KERNEL);
488 if (!new)
489 return -ENOMEM;
491 /* start filling the new info now */
493 /* new or old dtim period? */
494 if (params->dtim_period)
495 new->dtim_period = params->dtim_period;
496 else
497 new->dtim_period = old->dtim_period;
500 * pointers go into the block we allocated,
501 * memory is | beacon_data | head | tail |
503 new->head = ((u8 *) new) + sizeof(*new);
504 new->tail = new->head + new_head_len;
505 new->head_len = new_head_len;
506 new->tail_len = new_tail_len;
508 /* copy in head */
509 if (params->head)
510 memcpy(new->head, params->head, new_head_len);
511 else
512 memcpy(new->head, old->head, new_head_len);
514 /* copy in optional tail */
515 if (params->tail)
516 memcpy(new->tail, params->tail, new_tail_len);
517 else
518 if (old)
519 memcpy(new->tail, old->tail, new_tail_len);
521 rcu_assign_pointer(sdata->u.ap.beacon, new);
523 synchronize_rcu();
525 kfree(old);
527 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
528 BSS_CHANGED_BEACON);
529 return 0;
532 static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
533 struct beacon_parameters *params)
535 struct ieee80211_sub_if_data *sdata;
536 struct beacon_data *old;
538 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
540 old = sdata->u.ap.beacon;
542 if (old)
543 return -EALREADY;
545 return ieee80211_config_beacon(sdata, params);
548 static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
549 struct beacon_parameters *params)
551 struct ieee80211_sub_if_data *sdata;
552 struct beacon_data *old;
554 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
556 old = sdata->u.ap.beacon;
558 if (!old)
559 return -ENOENT;
561 return ieee80211_config_beacon(sdata, params);
564 static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
566 struct ieee80211_sub_if_data *sdata;
567 struct beacon_data *old;
569 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
571 old = sdata->u.ap.beacon;
573 if (!old)
574 return -ENOENT;
576 rcu_assign_pointer(sdata->u.ap.beacon, NULL);
577 synchronize_rcu();
578 kfree(old);
580 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
581 return 0;
584 /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */
585 struct iapp_layer2_update {
586 u8 da[ETH_ALEN]; /* broadcast */
587 u8 sa[ETH_ALEN]; /* STA addr */
588 __be16 len; /* 6 */
589 u8 dsap; /* 0 */
590 u8 ssap; /* 0 */
591 u8 control;
592 u8 xid_info[3];
593 } __attribute__ ((packed));
595 static void ieee80211_send_layer2_update(struct sta_info *sta)
597 struct iapp_layer2_update *msg;
598 struct sk_buff *skb;
600 /* Send Level 2 Update Frame to update forwarding tables in layer 2
601 * bridge devices */
603 skb = dev_alloc_skb(sizeof(*msg));
604 if (!skb)
605 return;
606 msg = (struct iapp_layer2_update *)skb_put(skb, sizeof(*msg));
608 /* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID)
609 * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */
611 memset(msg->da, 0xff, ETH_ALEN);
612 memcpy(msg->sa, sta->sta.addr, ETH_ALEN);
613 msg->len = htons(6);
614 msg->dsap = 0;
615 msg->ssap = 0x01; /* NULL LSAP, CR Bit: Response */
616 msg->control = 0xaf; /* XID response lsb.1111F101.
617 * F=0 (no poll command; unsolicited frame) */
618 msg->xid_info[0] = 0x81; /* XID format identifier */
619 msg->xid_info[1] = 1; /* LLC types/classes: Type 1 LLC */
620 msg->xid_info[2] = 0; /* XID sender's receive window size (RW) */
622 skb->dev = sta->sdata->dev;
623 skb->protocol = eth_type_trans(skb, sta->sdata->dev);
624 memset(skb->cb, 0, sizeof(skb->cb));
625 netif_rx(skb);
628 static void sta_apply_parameters(struct ieee80211_local *local,
629 struct sta_info *sta,
630 struct station_parameters *params)
632 u32 rates;
633 int i, j;
634 struct ieee80211_supported_band *sband;
635 struct ieee80211_sub_if_data *sdata = sta->sdata;
636 u32 mask, set;
638 sband = local->hw.wiphy->bands[local->oper_channel->band];
640 spin_lock_bh(&sta->lock);
641 mask = params->sta_flags_mask;
642 set = params->sta_flags_set;
644 if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
645 sta->flags &= ~WLAN_STA_AUTHORIZED;
646 if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
647 sta->flags |= WLAN_STA_AUTHORIZED;
650 if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) {
651 sta->flags &= ~WLAN_STA_SHORT_PREAMBLE;
652 if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE))
653 sta->flags |= WLAN_STA_SHORT_PREAMBLE;
656 if (mask & BIT(NL80211_STA_FLAG_WME)) {
657 sta->flags &= ~WLAN_STA_WME;
658 if (set & BIT(NL80211_STA_FLAG_WME))
659 sta->flags |= WLAN_STA_WME;
662 if (mask & BIT(NL80211_STA_FLAG_MFP)) {
663 sta->flags &= ~WLAN_STA_MFP;
664 if (set & BIT(NL80211_STA_FLAG_MFP))
665 sta->flags |= WLAN_STA_MFP;
667 spin_unlock_bh(&sta->lock);
670 * cfg80211 validates this (1-2007) and allows setting the AID
671 * only when creating a new station entry
673 if (params->aid)
674 sta->sta.aid = params->aid;
677 * FIXME: updating the following information is racy when this
678 * function is called from ieee80211_change_station().
679 * However, all this information should be static so
680 * maybe we should just reject attemps to change it.
683 if (params->listen_interval >= 0)
684 sta->listen_interval = params->listen_interval;
686 if (params->supported_rates) {
687 rates = 0;
689 for (i = 0; i < params->supported_rates_len; i++) {
690 int rate = (params->supported_rates[i] & 0x7f) * 5;
691 for (j = 0; j < sband->n_bitrates; j++) {
692 if (sband->bitrates[j].bitrate == rate)
693 rates |= BIT(j);
696 sta->sta.supp_rates[local->oper_channel->band] = rates;
699 if (params->ht_capa)
700 ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
701 params->ht_capa,
702 &sta->sta.ht_cap);
704 if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
705 switch (params->plink_action) {
706 case PLINK_ACTION_OPEN:
707 mesh_plink_open(sta);
708 break;
709 case PLINK_ACTION_BLOCK:
710 mesh_plink_block(sta);
711 break;
716 static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
717 u8 *mac, struct station_parameters *params)
719 struct ieee80211_local *local = wiphy_priv(wiphy);
720 struct sta_info *sta;
721 struct ieee80211_sub_if_data *sdata;
722 int err;
723 int layer2_update;
725 if (params->vlan) {
726 sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
728 if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
729 sdata->vif.type != NL80211_IFTYPE_AP)
730 return -EINVAL;
731 } else
732 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
734 if (compare_ether_addr(mac, dev->dev_addr) == 0)
735 return -EINVAL;
737 if (is_multicast_ether_addr(mac))
738 return -EINVAL;
740 sta = sta_info_alloc(sdata, mac, GFP_KERNEL);
741 if (!sta)
742 return -ENOMEM;
744 sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC;
746 sta_apply_parameters(local, sta, params);
748 rate_control_rate_init(sta);
750 layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
751 sdata->vif.type == NL80211_IFTYPE_AP;
753 rcu_read_lock();
755 err = sta_info_insert(sta);
756 if (err) {
757 rcu_read_unlock();
758 return err;
761 if (layer2_update)
762 ieee80211_send_layer2_update(sta);
764 rcu_read_unlock();
766 return 0;
769 static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
770 u8 *mac)
772 struct ieee80211_local *local = wiphy_priv(wiphy);
773 struct ieee80211_sub_if_data *sdata;
774 struct sta_info *sta;
776 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
778 if (mac) {
779 rcu_read_lock();
781 /* XXX: get sta belonging to dev */
782 sta = sta_info_get(local, mac);
783 if (!sta) {
784 rcu_read_unlock();
785 return -ENOENT;
788 sta_info_unlink(&sta);
789 rcu_read_unlock();
791 sta_info_destroy(sta);
792 } else
793 sta_info_flush(local, sdata);
795 return 0;
798 static int ieee80211_change_station(struct wiphy *wiphy,
799 struct net_device *dev,
800 u8 *mac,
801 struct station_parameters *params)
803 struct ieee80211_local *local = wiphy_priv(wiphy);
804 struct sta_info *sta;
805 struct ieee80211_sub_if_data *vlansdata;
807 rcu_read_lock();
809 /* XXX: get sta belonging to dev */
810 sta = sta_info_get(local, mac);
811 if (!sta) {
812 rcu_read_unlock();
813 return -ENOENT;
816 if (params->vlan && params->vlan != sta->sdata->dev) {
817 vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
819 if (vlansdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
820 vlansdata->vif.type != NL80211_IFTYPE_AP) {
821 rcu_read_unlock();
822 return -EINVAL;
825 if (params->vlan->ieee80211_ptr->use_4addr) {
826 if (vlansdata->u.vlan.sta) {
827 rcu_read_unlock();
828 return -EBUSY;
831 rcu_assign_pointer(vlansdata->u.vlan.sta, sta);
834 sta->sdata = vlansdata;
835 ieee80211_send_layer2_update(sta);
838 sta_apply_parameters(local, sta, params);
840 rcu_read_unlock();
842 return 0;
845 #ifdef CONFIG_MAC80211_MESH
846 static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
847 u8 *dst, u8 *next_hop)
849 struct ieee80211_local *local = wiphy_priv(wiphy);
850 struct ieee80211_sub_if_data *sdata;
851 struct mesh_path *mpath;
852 struct sta_info *sta;
853 int err;
855 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
857 rcu_read_lock();
858 sta = sta_info_get(local, next_hop);
859 if (!sta) {
860 rcu_read_unlock();
861 return -ENOENT;
864 err = mesh_path_add(dst, sdata);
865 if (err) {
866 rcu_read_unlock();
867 return err;
870 mpath = mesh_path_lookup(dst, sdata);
871 if (!mpath) {
872 rcu_read_unlock();
873 return -ENXIO;
875 mesh_path_fix_nexthop(mpath, sta);
877 rcu_read_unlock();
878 return 0;
881 static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev,
882 u8 *dst)
884 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
886 if (dst)
887 return mesh_path_del(dst, sdata);
889 mesh_path_flush(sdata);
890 return 0;
893 static int ieee80211_change_mpath(struct wiphy *wiphy,
894 struct net_device *dev,
895 u8 *dst, u8 *next_hop)
897 struct ieee80211_local *local = wiphy_priv(wiphy);
898 struct ieee80211_sub_if_data *sdata;
899 struct mesh_path *mpath;
900 struct sta_info *sta;
902 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
904 rcu_read_lock();
906 sta = sta_info_get(local, next_hop);
907 if (!sta) {
908 rcu_read_unlock();
909 return -ENOENT;
912 mpath = mesh_path_lookup(dst, sdata);
913 if (!mpath) {
914 rcu_read_unlock();
915 return -ENOENT;
918 mesh_path_fix_nexthop(mpath, sta);
920 rcu_read_unlock();
921 return 0;
924 static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
925 struct mpath_info *pinfo)
927 if (mpath->next_hop)
928 memcpy(next_hop, mpath->next_hop->sta.addr, ETH_ALEN);
929 else
930 memset(next_hop, 0, ETH_ALEN);
932 pinfo->generation = mesh_paths_generation;
934 pinfo->filled = MPATH_INFO_FRAME_QLEN |
935 MPATH_INFO_SN |
936 MPATH_INFO_METRIC |
937 MPATH_INFO_EXPTIME |
938 MPATH_INFO_DISCOVERY_TIMEOUT |
939 MPATH_INFO_DISCOVERY_RETRIES |
940 MPATH_INFO_FLAGS;
942 pinfo->frame_qlen = mpath->frame_queue.qlen;
943 pinfo->sn = mpath->sn;
944 pinfo->metric = mpath->metric;
945 if (time_before(jiffies, mpath->exp_time))
946 pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies);
947 pinfo->discovery_timeout =
948 jiffies_to_msecs(mpath->discovery_timeout);
949 pinfo->discovery_retries = mpath->discovery_retries;
950 pinfo->flags = 0;
951 if (mpath->flags & MESH_PATH_ACTIVE)
952 pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
953 if (mpath->flags & MESH_PATH_RESOLVING)
954 pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
955 if (mpath->flags & MESH_PATH_SN_VALID)
956 pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID;
957 if (mpath->flags & MESH_PATH_FIXED)
958 pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
959 if (mpath->flags & MESH_PATH_RESOLVING)
960 pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
962 pinfo->flags = mpath->flags;
965 static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
966 u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
969 struct ieee80211_sub_if_data *sdata;
970 struct mesh_path *mpath;
972 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
974 rcu_read_lock();
975 mpath = mesh_path_lookup(dst, sdata);
976 if (!mpath) {
977 rcu_read_unlock();
978 return -ENOENT;
980 memcpy(dst, mpath->dst, ETH_ALEN);
981 mpath_set_pinfo(mpath, next_hop, pinfo);
982 rcu_read_unlock();
983 return 0;
986 static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
987 int idx, u8 *dst, u8 *next_hop,
988 struct mpath_info *pinfo)
990 struct ieee80211_sub_if_data *sdata;
991 struct mesh_path *mpath;
993 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
995 rcu_read_lock();
996 mpath = mesh_path_lookup_by_idx(idx, sdata);
997 if (!mpath) {
998 rcu_read_unlock();
999 return -ENOENT;
1001 memcpy(dst, mpath->dst, ETH_ALEN);
1002 mpath_set_pinfo(mpath, next_hop, pinfo);
1003 rcu_read_unlock();
1004 return 0;
1007 static int ieee80211_get_mesh_params(struct wiphy *wiphy,
1008 struct net_device *dev,
1009 struct mesh_config *conf)
1011 struct ieee80211_sub_if_data *sdata;
1012 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1014 memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config));
1015 return 0;
1018 static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask)
1020 return (mask >> (parm-1)) & 0x1;
1023 static int ieee80211_set_mesh_params(struct wiphy *wiphy,
1024 struct net_device *dev,
1025 const struct mesh_config *nconf, u32 mask)
1027 struct mesh_config *conf;
1028 struct ieee80211_sub_if_data *sdata;
1029 struct ieee80211_if_mesh *ifmsh;
1031 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1032 ifmsh = &sdata->u.mesh;
1034 /* Set the config options which we are interested in setting */
1035 conf = &(sdata->u.mesh.mshcfg);
1036 if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask))
1037 conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout;
1038 if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask))
1039 conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout;
1040 if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask))
1041 conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout;
1042 if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask))
1043 conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks;
1044 if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask))
1045 conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries;
1046 if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask))
1047 conf->dot11MeshTTL = nconf->dot11MeshTTL;
1048 if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask))
1049 conf->auto_open_plinks = nconf->auto_open_plinks;
1050 if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask))
1051 conf->dot11MeshHWMPmaxPREQretries =
1052 nconf->dot11MeshHWMPmaxPREQretries;
1053 if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask))
1054 conf->path_refresh_time = nconf->path_refresh_time;
1055 if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask))
1056 conf->min_discovery_timeout = nconf->min_discovery_timeout;
1057 if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask))
1058 conf->dot11MeshHWMPactivePathTimeout =
1059 nconf->dot11MeshHWMPactivePathTimeout;
1060 if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask))
1061 conf->dot11MeshHWMPpreqMinInterval =
1062 nconf->dot11MeshHWMPpreqMinInterval;
1063 if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
1064 mask))
1065 conf->dot11MeshHWMPnetDiameterTraversalTime =
1066 nconf->dot11MeshHWMPnetDiameterTraversalTime;
1067 if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) {
1068 conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode;
1069 ieee80211_mesh_root_setup(ifmsh);
1071 return 0;
1074 #endif
1076 static int ieee80211_change_bss(struct wiphy *wiphy,
1077 struct net_device *dev,
1078 struct bss_parameters *params)
1080 struct ieee80211_sub_if_data *sdata;
1081 u32 changed = 0;
1083 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1085 if (params->use_cts_prot >= 0) {
1086 sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot;
1087 changed |= BSS_CHANGED_ERP_CTS_PROT;
1089 if (params->use_short_preamble >= 0) {
1090 sdata->vif.bss_conf.use_short_preamble =
1091 params->use_short_preamble;
1092 changed |= BSS_CHANGED_ERP_PREAMBLE;
1094 if (params->use_short_slot_time >= 0) {
1095 sdata->vif.bss_conf.use_short_slot =
1096 params->use_short_slot_time;
1097 changed |= BSS_CHANGED_ERP_SLOT;
1100 if (params->basic_rates) {
1101 int i, j;
1102 u32 rates = 0;
1103 struct ieee80211_local *local = wiphy_priv(wiphy);
1104 struct ieee80211_supported_band *sband =
1105 wiphy->bands[local->oper_channel->band];
1107 for (i = 0; i < params->basic_rates_len; i++) {
1108 int rate = (params->basic_rates[i] & 0x7f) * 5;
1109 for (j = 0; j < sband->n_bitrates; j++) {
1110 if (sband->bitrates[j].bitrate == rate)
1111 rates |= BIT(j);
1114 sdata->vif.bss_conf.basic_rates = rates;
1115 changed |= BSS_CHANGED_BASIC_RATES;
1118 ieee80211_bss_info_change_notify(sdata, changed);
1120 return 0;
1123 static int ieee80211_set_txq_params(struct wiphy *wiphy,
1124 struct ieee80211_txq_params *params)
1126 struct ieee80211_local *local = wiphy_priv(wiphy);
1127 struct ieee80211_tx_queue_params p;
1129 if (!local->ops->conf_tx)
1130 return -EOPNOTSUPP;
1132 memset(&p, 0, sizeof(p));
1133 p.aifs = params->aifs;
1134 p.cw_max = params->cwmax;
1135 p.cw_min = params->cwmin;
1136 p.txop = params->txop;
1137 if (drv_conf_tx(local, params->queue, &p)) {
1138 printk(KERN_DEBUG "%s: failed to set TX queue "
1139 "parameters for queue %d\n",
1140 wiphy_name(local->hw.wiphy), params->queue);
1141 return -EINVAL;
1144 return 0;
1147 static int ieee80211_set_channel(struct wiphy *wiphy,
1148 struct ieee80211_channel *chan,
1149 enum nl80211_channel_type channel_type)
1151 struct ieee80211_local *local = wiphy_priv(wiphy);
1153 local->oper_channel = chan;
1154 local->oper_channel_type = channel_type;
1156 return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
1159 #ifdef CONFIG_PM
1160 static int ieee80211_suspend(struct wiphy *wiphy)
1162 return __ieee80211_suspend(wiphy_priv(wiphy));
1165 static int ieee80211_resume(struct wiphy *wiphy)
1167 return __ieee80211_resume(wiphy_priv(wiphy));
1169 #else
1170 #define ieee80211_suspend NULL
1171 #define ieee80211_resume NULL
1172 #endif
1174 static int ieee80211_scan(struct wiphy *wiphy,
1175 struct net_device *dev,
1176 struct cfg80211_scan_request *req)
1178 struct ieee80211_sub_if_data *sdata;
1180 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1182 if (sdata->vif.type != NL80211_IFTYPE_STATION &&
1183 sdata->vif.type != NL80211_IFTYPE_ADHOC &&
1184 sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
1185 (sdata->vif.type != NL80211_IFTYPE_AP || sdata->u.ap.beacon))
1186 return -EOPNOTSUPP;
1188 return ieee80211_request_scan(sdata, req);
1191 static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
1192 struct cfg80211_auth_request *req)
1194 return ieee80211_mgd_auth(IEEE80211_DEV_TO_SUB_IF(dev), req);
1197 static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
1198 struct cfg80211_assoc_request *req)
1200 return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req);
1203 static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev,
1204 struct cfg80211_deauth_request *req,
1205 void *cookie)
1207 return ieee80211_mgd_deauth(IEEE80211_DEV_TO_SUB_IF(dev),
1208 req, cookie);
1211 static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
1212 struct cfg80211_disassoc_request *req,
1213 void *cookie)
1215 return ieee80211_mgd_disassoc(IEEE80211_DEV_TO_SUB_IF(dev),
1216 req, cookie);
1219 static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
1220 struct cfg80211_ibss_params *params)
1222 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1224 return ieee80211_ibss_join(sdata, params);
1227 static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
1229 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1231 return ieee80211_ibss_leave(sdata);
1234 static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
1236 struct ieee80211_local *local = wiphy_priv(wiphy);
1237 int err;
1239 if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
1240 err = drv_set_rts_threshold(local, wiphy->rts_threshold);
1242 if (err)
1243 return err;
1246 if (changed & WIPHY_PARAM_RETRY_SHORT)
1247 local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
1248 if (changed & WIPHY_PARAM_RETRY_LONG)
1249 local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
1250 if (changed &
1251 (WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG))
1252 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
1254 return 0;
1257 static int ieee80211_set_tx_power(struct wiphy *wiphy,
1258 enum tx_power_setting type, int dbm)
1260 struct ieee80211_local *local = wiphy_priv(wiphy);
1261 struct ieee80211_channel *chan = local->hw.conf.channel;
1262 u32 changes = 0;
1264 switch (type) {
1265 case TX_POWER_AUTOMATIC:
1266 local->user_power_level = -1;
1267 break;
1268 case TX_POWER_LIMITED:
1269 if (dbm < 0)
1270 return -EINVAL;
1271 local->user_power_level = dbm;
1272 break;
1273 case TX_POWER_FIXED:
1274 if (dbm < 0)
1275 return -EINVAL;
1276 /* TODO: move to cfg80211 when it knows the channel */
1277 if (dbm > chan->max_power)
1278 return -EINVAL;
1279 local->user_power_level = dbm;
1280 break;
1283 ieee80211_hw_config(local, changes);
1285 return 0;
1288 static int ieee80211_get_tx_power(struct wiphy *wiphy, int *dbm)
1290 struct ieee80211_local *local = wiphy_priv(wiphy);
1292 *dbm = local->hw.conf.power_level;
1294 return 0;
1297 static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
1298 u8 *addr)
1300 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1302 memcpy(&sdata->u.wds.remote_addr, addr, ETH_ALEN);
1304 return 0;
1307 static void ieee80211_rfkill_poll(struct wiphy *wiphy)
1309 struct ieee80211_local *local = wiphy_priv(wiphy);
1311 drv_rfkill_poll(local);
1314 #ifdef CONFIG_NL80211_TESTMODE
1315 static int ieee80211_testmode_cmd(struct wiphy *wiphy, void *data, int len)
1317 struct ieee80211_local *local = wiphy_priv(wiphy);
1319 if (!local->ops->testmode_cmd)
1320 return -EOPNOTSUPP;
1322 return local->ops->testmode_cmd(&local->hw, data, len);
1324 #endif
1326 static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
1327 bool enabled, int timeout)
1329 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1330 struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
1331 struct ieee80211_conf *conf = &local->hw.conf;
1333 if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
1334 return -EOPNOTSUPP;
1336 if (enabled == sdata->u.mgd.powersave &&
1337 timeout == conf->dynamic_ps_timeout)
1338 return 0;
1340 sdata->u.mgd.powersave = enabled;
1341 conf->dynamic_ps_timeout = timeout;
1343 if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
1344 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1346 ieee80211_recalc_ps(local, -1);
1348 return 0;
1351 static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
1352 struct net_device *dev,
1353 const u8 *addr,
1354 const struct cfg80211_bitrate_mask *mask)
1356 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1357 struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
1358 int i, err = -EINVAL;
1359 u32 target_rate;
1360 struct ieee80211_supported_band *sband;
1362 sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
1364 /* target_rate = -1, rate->fixed = 0 means auto only, so use all rates
1365 * target_rate = X, rate->fixed = 1 means only rate X
1366 * target_rate = X, rate->fixed = 0 means all rates <= X */
1367 sdata->max_ratectrl_rateidx = -1;
1368 sdata->force_unicast_rateidx = -1;
1370 if (mask->fixed)
1371 target_rate = mask->fixed / 100;
1372 else if (mask->maxrate)
1373 target_rate = mask->maxrate / 100;
1374 else
1375 return 0;
1377 for (i=0; i< sband->n_bitrates; i++) {
1378 struct ieee80211_rate *brate = &sband->bitrates[i];
1379 int this_rate = brate->bitrate;
1381 if (target_rate == this_rate) {
1382 sdata->max_ratectrl_rateidx = i;
1383 if (mask->fixed)
1384 sdata->force_unicast_rateidx = i;
1385 err = 0;
1386 break;
1390 return err;
1393 struct cfg80211_ops mac80211_config_ops = {
1394 .add_virtual_intf = ieee80211_add_iface,
1395 .del_virtual_intf = ieee80211_del_iface,
1396 .change_virtual_intf = ieee80211_change_iface,
1397 .add_key = ieee80211_add_key,
1398 .del_key = ieee80211_del_key,
1399 .get_key = ieee80211_get_key,
1400 .set_default_key = ieee80211_config_default_key,
1401 .set_default_mgmt_key = ieee80211_config_default_mgmt_key,
1402 .add_beacon = ieee80211_add_beacon,
1403 .set_beacon = ieee80211_set_beacon,
1404 .del_beacon = ieee80211_del_beacon,
1405 .add_station = ieee80211_add_station,
1406 .del_station = ieee80211_del_station,
1407 .change_station = ieee80211_change_station,
1408 .get_station = ieee80211_get_station,
1409 .dump_station = ieee80211_dump_station,
1410 #ifdef CONFIG_MAC80211_MESH
1411 .add_mpath = ieee80211_add_mpath,
1412 .del_mpath = ieee80211_del_mpath,
1413 .change_mpath = ieee80211_change_mpath,
1414 .get_mpath = ieee80211_get_mpath,
1415 .dump_mpath = ieee80211_dump_mpath,
1416 .set_mesh_params = ieee80211_set_mesh_params,
1417 .get_mesh_params = ieee80211_get_mesh_params,
1418 #endif
1419 .change_bss = ieee80211_change_bss,
1420 .set_txq_params = ieee80211_set_txq_params,
1421 .set_channel = ieee80211_set_channel,
1422 .suspend = ieee80211_suspend,
1423 .resume = ieee80211_resume,
1424 .scan = ieee80211_scan,
1425 .auth = ieee80211_auth,
1426 .assoc = ieee80211_assoc,
1427 .deauth = ieee80211_deauth,
1428 .disassoc = ieee80211_disassoc,
1429 .join_ibss = ieee80211_join_ibss,
1430 .leave_ibss = ieee80211_leave_ibss,
1431 .set_wiphy_params = ieee80211_set_wiphy_params,
1432 .set_tx_power = ieee80211_set_tx_power,
1433 .get_tx_power = ieee80211_get_tx_power,
1434 .set_wds_peer = ieee80211_set_wds_peer,
1435 .rfkill_poll = ieee80211_rfkill_poll,
1436 CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
1437 .set_power_mgmt = ieee80211_set_power_mgmt,
1438 .set_bitrate_mask = ieee80211_set_bitrate_mask,