2 * Davicom DM9000 Fast Ethernet driver for Linux.
3 * Copyright (C) 1997 Sten Wang
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * (C) Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
17 * Additional updates, Copyright:
18 * Ben Dooks <ben@simtec.co.uk>
19 * Sascha Hauer <s.hauer@pengutronix.de>
22 #include <linux/module.h>
23 #include <linux/ioport.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/init.h>
27 #include <linux/skbuff.h>
28 #include <linux/spinlock.h>
29 #include <linux/crc32.h>
30 #include <linux/mii.h>
31 #include <linux/ethtool.h>
32 #include <linux/dm9000.h>
33 #include <linux/delay.h>
34 #include <linux/platform_device.h>
35 #include <linux/irq.h>
36 #include <linux/slab.h>
38 #include <asm/delay.h>
44 /* Board/System/Debug information/definition ---------------- */
46 #define DM9000_PHY 0x40 /* PHY address 0x01 */
48 #define CARDNAME "dm9000"
49 #define DRV_VERSION "1.31"
52 * Transmit timeout, default 5 seconds.
54 static int watchdog
= 5000;
55 module_param(watchdog
, int, 0400);
56 MODULE_PARM_DESC(watchdog
, "transmit timeout in milliseconds");
58 /* DM9000 register address locking.
60 * The DM9000 uses an address register to control where data written
61 * to the data register goes. This means that the address register
62 * must be preserved over interrupts or similar calls.
64 * During interrupt and other critical calls, a spinlock is used to
65 * protect the system, but the calls themselves save the address
66 * in the address register in case they are interrupting another
67 * access to the device.
69 * For general accesses a lock is provided so that calls which are
70 * allowed to sleep are serialised so that the address register does
71 * not need to be saved. This lock also serves to serialise access
72 * to the EEPROM and PHY access registers which are shared between
76 /* The driver supports the original DM9000E, and now the two newer
77 * devices, DM9000A and DM9000B.
81 TYPE_DM9000E
, /* original DM9000 */
86 /* Structure/enum declaration ------------------------------- */
87 typedef struct board_info
{
89 void __iomem
*io_addr
; /* Register I/O base address */
90 void __iomem
*io_data
; /* Data I/O address */
98 u8 io_mode
; /* 0:word, 2:byte */
103 unsigned int in_suspend
:1;
104 unsigned int wake_supported
:1;
107 enum dm9000_type type
;
109 void (*inblk
)(void __iomem
*port
, void *data
, int length
);
110 void (*outblk
)(void __iomem
*port
, void *data
, int length
);
111 void (*dumpblk
)(void __iomem
*port
, int length
);
113 struct device
*dev
; /* parent device */
115 struct resource
*addr_res
; /* resources found */
116 struct resource
*data_res
;
117 struct resource
*addr_req
; /* resources requested */
118 struct resource
*data_req
;
119 struct resource
*irq_res
;
123 struct mutex addr_lock
; /* phy and eeprom access lock */
125 struct delayed_work phy_poll
;
126 struct net_device
*ndev
;
130 struct mii_if_info mii
;
141 #define dm9000_dbg(db, lev, msg...) do { \
142 if ((lev) < CONFIG_DM9000_DEBUGLEVEL && \
143 (lev) < db->debug_level) { \
144 dev_dbg(db->dev, msg); \
148 static inline board_info_t
*to_dm9000_board(struct net_device
*dev
)
150 return netdev_priv(dev
);
153 /* DM9000 network board routine ---------------------------- */
156 dm9000_reset(board_info_t
* db
)
158 dev_dbg(db
->dev
, "resetting device\n");
161 writeb(DM9000_NCR
, db
->io_addr
);
163 writeb(NCR_RST
, db
->io_data
);
168 * Read a byte from I/O port
171 ior(board_info_t
* db
, int reg
)
173 writeb(reg
, db
->io_addr
);
174 return readb(db
->io_data
);
178 * Write a byte to I/O port
182 iow(board_info_t
* db
, int reg
, int value
)
184 writeb(reg
, db
->io_addr
);
185 writeb(value
, db
->io_data
);
188 /* routines for sending block to chip */
190 static void dm9000_outblk_8bit(void __iomem
*reg
, void *data
, int count
)
192 writesb(reg
, data
, count
);
195 static void dm9000_outblk_16bit(void __iomem
*reg
, void *data
, int count
)
197 writesw(reg
, data
, (count
+1) >> 1);
200 static void dm9000_outblk_32bit(void __iomem
*reg
, void *data
, int count
)
202 writesl(reg
, data
, (count
+3) >> 2);
205 /* input block from chip to memory */
207 static void dm9000_inblk_8bit(void __iomem
*reg
, void *data
, int count
)
209 readsb(reg
, data
, count
);
213 static void dm9000_inblk_16bit(void __iomem
*reg
, void *data
, int count
)
215 readsw(reg
, data
, (count
+1) >> 1);
218 static void dm9000_inblk_32bit(void __iomem
*reg
, void *data
, int count
)
220 readsl(reg
, data
, (count
+3) >> 2);
223 /* dump block from chip to null */
225 static void dm9000_dumpblk_8bit(void __iomem
*reg
, int count
)
230 for (i
= 0; i
< count
; i
++)
234 static void dm9000_dumpblk_16bit(void __iomem
*reg
, int count
)
239 count
= (count
+ 1) >> 1;
241 for (i
= 0; i
< count
; i
++)
245 static void dm9000_dumpblk_32bit(void __iomem
*reg
, int count
)
250 count
= (count
+ 3) >> 2;
252 for (i
= 0; i
< count
; i
++)
258 * select the specified set of io routines to use with the
262 static void dm9000_set_io(struct board_info
*db
, int byte_width
)
264 /* use the size of the data resource to work out what IO
265 * routines we want to use
268 switch (byte_width
) {
270 db
->dumpblk
= dm9000_dumpblk_8bit
;
271 db
->outblk
= dm9000_outblk_8bit
;
272 db
->inblk
= dm9000_inblk_8bit
;
277 dev_dbg(db
->dev
, ": 3 byte IO, falling back to 16bit\n");
279 db
->dumpblk
= dm9000_dumpblk_16bit
;
280 db
->outblk
= dm9000_outblk_16bit
;
281 db
->inblk
= dm9000_inblk_16bit
;
286 db
->dumpblk
= dm9000_dumpblk_32bit
;
287 db
->outblk
= dm9000_outblk_32bit
;
288 db
->inblk
= dm9000_inblk_32bit
;
293 static void dm9000_schedule_poll(board_info_t
*db
)
295 if (db
->type
== TYPE_DM9000E
)
296 schedule_delayed_work(&db
->phy_poll
, HZ
* 2);
299 static int dm9000_ioctl(struct net_device
*dev
, struct ifreq
*req
, int cmd
)
301 board_info_t
*dm
= to_dm9000_board(dev
);
303 if (!netif_running(dev
))
306 return generic_mii_ioctl(&dm
->mii
, if_mii(req
), cmd
, NULL
);
310 dm9000_read_locked(board_info_t
*db
, int reg
)
315 spin_lock_irqsave(&db
->lock
, flags
);
317 spin_unlock_irqrestore(&db
->lock
, flags
);
322 static int dm9000_wait_eeprom(board_info_t
*db
)
325 int timeout
= 8; /* wait max 8msec */
327 /* The DM9000 data sheets say we should be able to
328 * poll the ERRE bit in EPCR to wait for the EEPROM
329 * operation. From testing several chips, this bit
330 * does not seem to work.
332 * We attempt to use the bit, but fall back to the
333 * timeout (which is why we do not return an error
334 * on expiry) to say that the EEPROM operation has
339 status
= dm9000_read_locked(db
, DM9000_EPCR
);
341 if ((status
& EPCR_ERRE
) == 0)
347 dev_dbg(db
->dev
, "timeout waiting EEPROM\n");
356 * Read a word data from EEPROM
359 dm9000_read_eeprom(board_info_t
*db
, int offset
, u8
*to
)
363 if (db
->flags
& DM9000_PLATF_NO_EEPROM
) {
369 mutex_lock(&db
->addr_lock
);
371 spin_lock_irqsave(&db
->lock
, flags
);
373 iow(db
, DM9000_EPAR
, offset
);
374 iow(db
, DM9000_EPCR
, EPCR_ERPRR
);
376 spin_unlock_irqrestore(&db
->lock
, flags
);
378 dm9000_wait_eeprom(db
);
380 /* delay for at-least 150uS */
383 spin_lock_irqsave(&db
->lock
, flags
);
385 iow(db
, DM9000_EPCR
, 0x0);
387 to
[0] = ior(db
, DM9000_EPDRL
);
388 to
[1] = ior(db
, DM9000_EPDRH
);
390 spin_unlock_irqrestore(&db
->lock
, flags
);
392 mutex_unlock(&db
->addr_lock
);
396 * Write a word data to SROM
399 dm9000_write_eeprom(board_info_t
*db
, int offset
, u8
*data
)
403 if (db
->flags
& DM9000_PLATF_NO_EEPROM
)
406 mutex_lock(&db
->addr_lock
);
408 spin_lock_irqsave(&db
->lock
, flags
);
409 iow(db
, DM9000_EPAR
, offset
);
410 iow(db
, DM9000_EPDRH
, data
[1]);
411 iow(db
, DM9000_EPDRL
, data
[0]);
412 iow(db
, DM9000_EPCR
, EPCR_WEP
| EPCR_ERPRW
);
413 spin_unlock_irqrestore(&db
->lock
, flags
);
415 dm9000_wait_eeprom(db
);
417 mdelay(1); /* wait at least 150uS to clear */
419 spin_lock_irqsave(&db
->lock
, flags
);
420 iow(db
, DM9000_EPCR
, 0);
421 spin_unlock_irqrestore(&db
->lock
, flags
);
423 mutex_unlock(&db
->addr_lock
);
428 static void dm9000_get_drvinfo(struct net_device
*dev
,
429 struct ethtool_drvinfo
*info
)
431 board_info_t
*dm
= to_dm9000_board(dev
);
433 strcpy(info
->driver
, CARDNAME
);
434 strcpy(info
->version
, DRV_VERSION
);
435 strcpy(info
->bus_info
, to_platform_device(dm
->dev
)->name
);
438 static u32
dm9000_get_msglevel(struct net_device
*dev
)
440 board_info_t
*dm
= to_dm9000_board(dev
);
442 return dm
->msg_enable
;
445 static void dm9000_set_msglevel(struct net_device
*dev
, u32 value
)
447 board_info_t
*dm
= to_dm9000_board(dev
);
449 dm
->msg_enable
= value
;
452 static int dm9000_get_settings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
454 board_info_t
*dm
= to_dm9000_board(dev
);
456 mii_ethtool_gset(&dm
->mii
, cmd
);
460 static int dm9000_set_settings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
462 board_info_t
*dm
= to_dm9000_board(dev
);
464 return mii_ethtool_sset(&dm
->mii
, cmd
);
467 static int dm9000_nway_reset(struct net_device
*dev
)
469 board_info_t
*dm
= to_dm9000_board(dev
);
470 return mii_nway_restart(&dm
->mii
);
473 static uint32_t dm9000_get_rx_csum(struct net_device
*dev
)
475 board_info_t
*dm
= to_dm9000_board(dev
);
479 static int dm9000_set_rx_csum_unlocked(struct net_device
*dev
, uint32_t data
)
481 board_info_t
*dm
= to_dm9000_board(dev
);
485 iow(dm
, DM9000_RCSR
, dm
->rx_csum
? RCSR_CSUM
: 0);
493 static int dm9000_set_rx_csum(struct net_device
*dev
, uint32_t data
)
495 board_info_t
*dm
= to_dm9000_board(dev
);
499 spin_lock_irqsave(&dm
->lock
, flags
);
500 ret
= dm9000_set_rx_csum_unlocked(dev
, data
);
501 spin_unlock_irqrestore(&dm
->lock
, flags
);
506 static int dm9000_set_tx_csum(struct net_device
*dev
, uint32_t data
)
508 board_info_t
*dm
= to_dm9000_board(dev
);
509 int ret
= -EOPNOTSUPP
;
512 ret
= ethtool_op_set_tx_csum(dev
, data
);
516 static u32
dm9000_get_link(struct net_device
*dev
)
518 board_info_t
*dm
= to_dm9000_board(dev
);
521 if (dm
->flags
& DM9000_PLATF_EXT_PHY
)
522 ret
= mii_link_ok(&dm
->mii
);
524 ret
= dm9000_read_locked(dm
, DM9000_NSR
) & NSR_LINKST
? 1 : 0;
529 #define DM_EEPROM_MAGIC (0x444D394B)
531 static int dm9000_get_eeprom_len(struct net_device
*dev
)
536 static int dm9000_get_eeprom(struct net_device
*dev
,
537 struct ethtool_eeprom
*ee
, u8
*data
)
539 board_info_t
*dm
= to_dm9000_board(dev
);
540 int offset
= ee
->offset
;
544 /* EEPROM access is aligned to two bytes */
546 if ((len
& 1) != 0 || (offset
& 1) != 0)
549 if (dm
->flags
& DM9000_PLATF_NO_EEPROM
)
552 ee
->magic
= DM_EEPROM_MAGIC
;
554 for (i
= 0; i
< len
; i
+= 2)
555 dm9000_read_eeprom(dm
, (offset
+ i
) / 2, data
+ i
);
560 static int dm9000_set_eeprom(struct net_device
*dev
,
561 struct ethtool_eeprom
*ee
, u8
*data
)
563 board_info_t
*dm
= to_dm9000_board(dev
);
564 int offset
= ee
->offset
;
568 /* EEPROM access is aligned to two bytes */
570 if ((len
& 1) != 0 || (offset
& 1) != 0)
573 if (dm
->flags
& DM9000_PLATF_NO_EEPROM
)
576 if (ee
->magic
!= DM_EEPROM_MAGIC
)
579 for (i
= 0; i
< len
; i
+= 2)
580 dm9000_write_eeprom(dm
, (offset
+ i
) / 2, data
+ i
);
585 static void dm9000_get_wol(struct net_device
*dev
, struct ethtool_wolinfo
*w
)
587 board_info_t
*dm
= to_dm9000_board(dev
);
589 memset(w
, 0, sizeof(struct ethtool_wolinfo
));
591 /* note, we could probably support wake-phy too */
592 w
->supported
= dm
->wake_supported
? WAKE_MAGIC
: 0;
593 w
->wolopts
= dm
->wake_state
;
596 static int dm9000_set_wol(struct net_device
*dev
, struct ethtool_wolinfo
*w
)
598 board_info_t
*dm
= to_dm9000_board(dev
);
600 u32 opts
= w
->wolopts
;
603 if (!dm
->wake_supported
)
606 if (opts
& ~WAKE_MAGIC
)
609 if (opts
& WAKE_MAGIC
)
612 mutex_lock(&dm
->addr_lock
);
614 spin_lock_irqsave(&dm
->lock
, flags
);
615 iow(dm
, DM9000_WCR
, wcr
);
616 spin_unlock_irqrestore(&dm
->lock
, flags
);
618 mutex_unlock(&dm
->addr_lock
);
620 if (dm
->wake_state
!= opts
) {
621 /* change in wol state, update IRQ state */
624 set_irq_wake(dm
->irq_wake
, 1);
625 else if (dm
->wake_state
& !opts
)
626 set_irq_wake(dm
->irq_wake
, 0);
629 dm
->wake_state
= opts
;
633 static const struct ethtool_ops dm9000_ethtool_ops
= {
634 .get_drvinfo
= dm9000_get_drvinfo
,
635 .get_settings
= dm9000_get_settings
,
636 .set_settings
= dm9000_set_settings
,
637 .get_msglevel
= dm9000_get_msglevel
,
638 .set_msglevel
= dm9000_set_msglevel
,
639 .nway_reset
= dm9000_nway_reset
,
640 .get_link
= dm9000_get_link
,
641 .get_wol
= dm9000_get_wol
,
642 .set_wol
= dm9000_set_wol
,
643 .get_eeprom_len
= dm9000_get_eeprom_len
,
644 .get_eeprom
= dm9000_get_eeprom
,
645 .set_eeprom
= dm9000_set_eeprom
,
646 .get_rx_csum
= dm9000_get_rx_csum
,
647 .set_rx_csum
= dm9000_set_rx_csum
,
648 .get_tx_csum
= ethtool_op_get_tx_csum
,
649 .set_tx_csum
= dm9000_set_tx_csum
,
652 static void dm9000_show_carrier(board_info_t
*db
,
653 unsigned carrier
, unsigned nsr
)
655 struct net_device
*ndev
= db
->ndev
;
656 unsigned ncr
= dm9000_read_locked(db
, DM9000_NCR
);
659 dev_info(db
->dev
, "%s: link up, %dMbps, %s-duplex, no LPA\n",
660 ndev
->name
, (nsr
& NSR_SPEED
) ? 10 : 100,
661 (ncr
& NCR_FDX
) ? "full" : "half");
663 dev_info(db
->dev
, "%s: link down\n", ndev
->name
);
667 dm9000_poll_work(struct work_struct
*w
)
669 struct delayed_work
*dw
= to_delayed_work(w
);
670 board_info_t
*db
= container_of(dw
, board_info_t
, phy_poll
);
671 struct net_device
*ndev
= db
->ndev
;
673 if (db
->flags
& DM9000_PLATF_SIMPLE_PHY
&&
674 !(db
->flags
& DM9000_PLATF_EXT_PHY
)) {
675 unsigned nsr
= dm9000_read_locked(db
, DM9000_NSR
);
676 unsigned old_carrier
= netif_carrier_ok(ndev
) ? 1 : 0;
677 unsigned new_carrier
;
679 new_carrier
= (nsr
& NSR_LINKST
) ? 1 : 0;
681 if (old_carrier
!= new_carrier
) {
682 if (netif_msg_link(db
))
683 dm9000_show_carrier(db
, new_carrier
, nsr
);
686 netif_carrier_off(ndev
);
688 netif_carrier_on(ndev
);
691 mii_check_media(&db
->mii
, netif_msg_link(db
), 0);
693 if (netif_running(ndev
))
694 dm9000_schedule_poll(db
);
697 /* dm9000_release_board
699 * release a board, and any mapped resources
703 dm9000_release_board(struct platform_device
*pdev
, struct board_info
*db
)
705 /* unmap our resources */
707 iounmap(db
->io_addr
);
708 iounmap(db
->io_data
);
710 /* release the resources */
712 release_resource(db
->data_req
);
715 release_resource(db
->addr_req
);
719 static unsigned char dm9000_type_to_char(enum dm9000_type type
)
722 case TYPE_DM9000E
: return 'e';
723 case TYPE_DM9000A
: return 'a';
724 case TYPE_DM9000B
: return 'b';
731 * Set DM9000 multicast address
734 dm9000_hash_table_unlocked(struct net_device
*dev
)
736 board_info_t
*db
= netdev_priv(dev
);
737 struct netdev_hw_addr
*ha
;
741 u8 rcr
= RCR_DIS_LONG
| RCR_DIS_CRC
| RCR_RXEN
;
743 dm9000_dbg(db
, 1, "entering %s\n", __func__
);
745 for (i
= 0, oft
= DM9000_PAR
; i
< 6; i
++, oft
++)
746 iow(db
, oft
, dev
->dev_addr
[i
]);
748 /* Clear Hash Table */
749 for (i
= 0; i
< 4; i
++)
752 /* broadcast address */
753 hash_table
[3] = 0x8000;
755 if (dev
->flags
& IFF_PROMISC
)
758 if (dev
->flags
& IFF_ALLMULTI
)
761 /* the multicast address in Hash Table : 64 bits */
762 netdev_for_each_mc_addr(ha
, dev
) {
763 hash_val
= ether_crc_le(6, ha
->addr
) & 0x3f;
764 hash_table
[hash_val
/ 16] |= (u16
) 1 << (hash_val
% 16);
767 /* Write the hash table to MAC MD table */
768 for (i
= 0, oft
= DM9000_MAR
; i
< 4; i
++) {
769 iow(db
, oft
++, hash_table
[i
]);
770 iow(db
, oft
++, hash_table
[i
] >> 8);
773 iow(db
, DM9000_RCR
, rcr
);
777 dm9000_hash_table(struct net_device
*dev
)
779 board_info_t
*db
= netdev_priv(dev
);
782 spin_lock_irqsave(&db
->lock
, flags
);
783 dm9000_hash_table_unlocked(dev
);
784 spin_unlock_irqrestore(&db
->lock
, flags
);
788 * Initialize dm9000 board
791 dm9000_init_dm9000(struct net_device
*dev
)
793 board_info_t
*db
= netdev_priv(dev
);
797 dm9000_dbg(db
, 1, "entering %s\n", __func__
);
800 db
->io_mode
= ior(db
, DM9000_ISR
) >> 6; /* ISR bit7:6 keeps I/O mode */
803 dm9000_set_rx_csum_unlocked(dev
, db
->rx_csum
);
805 /* GPIO0 on pre-activate PHY */
806 iow(db
, DM9000_GPR
, 0); /* REG_1F bit0 activate phyxcer */
807 iow(db
, DM9000_GPCR
, GPCR_GEP_CNTL
); /* Let GPIO0 output */
808 iow(db
, DM9000_GPR
, 0); /* Enable PHY */
810 ncr
= (db
->flags
& DM9000_PLATF_EXT_PHY
) ? NCR_EXT_PHY
: 0;
812 /* if wol is needed, then always set NCR_WAKEEN otherwise we end
813 * up dumping the wake events if we disable this. There is already
814 * a wake-mask in DM9000_WCR */
815 if (db
->wake_supported
)
818 iow(db
, DM9000_NCR
, ncr
);
820 /* Program operating register */
821 iow(db
, DM9000_TCR
, 0); /* TX Polling clear */
822 iow(db
, DM9000_BPTR
, 0x3f); /* Less 3Kb, 200us */
823 iow(db
, DM9000_FCR
, 0xff); /* Flow Control */
824 iow(db
, DM9000_SMCR
, 0); /* Special Mode */
825 /* clear TX status */
826 iow(db
, DM9000_NSR
, NSR_WAKEST
| NSR_TX2END
| NSR_TX1END
);
827 iow(db
, DM9000_ISR
, ISR_CLR_STATUS
); /* Clear interrupt status */
829 /* Set address filter table */
830 dm9000_hash_table_unlocked(dev
);
832 imr
= IMR_PAR
| IMR_PTM
| IMR_PRM
;
833 if (db
->type
!= TYPE_DM9000E
)
838 /* Enable TX/RX interrupt mask */
839 iow(db
, DM9000_IMR
, imr
);
841 /* Init Driver variable */
843 db
->queue_pkt_len
= 0;
844 dev
->trans_start
= jiffies
;
847 /* Our watchdog timed out. Called by the networking layer */
848 static void dm9000_timeout(struct net_device
*dev
)
850 board_info_t
*db
= netdev_priv(dev
);
854 /* Save previous register address */
855 reg_save
= readb(db
->io_addr
);
856 spin_lock_irqsave(&db
->lock
, flags
);
858 netif_stop_queue(dev
);
860 dm9000_init_dm9000(dev
);
861 /* We can accept TX packets again */
862 dev
->trans_start
= jiffies
; /* prevent tx timeout */
863 netif_wake_queue(dev
);
865 /* Restore previous register address */
866 writeb(reg_save
, db
->io_addr
);
867 spin_unlock_irqrestore(&db
->lock
, flags
);
870 static void dm9000_send_packet(struct net_device
*dev
,
874 board_info_t
*dm
= to_dm9000_board(dev
);
876 /* The DM9000 is not smart enough to leave fragmented packets alone. */
877 if (dm
->ip_summed
!= ip_summed
) {
878 if (ip_summed
== CHECKSUM_NONE
)
879 iow(dm
, DM9000_TCCR
, 0);
881 iow(dm
, DM9000_TCCR
, TCCR_IP
| TCCR_UDP
| TCCR_TCP
);
882 dm
->ip_summed
= ip_summed
;
885 /* Set TX length to DM9000 */
886 iow(dm
, DM9000_TXPLL
, pkt_len
);
887 iow(dm
, DM9000_TXPLH
, pkt_len
>> 8);
889 /* Issue TX polling command */
890 iow(dm
, DM9000_TCR
, TCR_TXREQ
); /* Cleared after TX complete */
894 * Hardware start transmission.
895 * Send a packet to media from the upper layer.
898 dm9000_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
901 board_info_t
*db
= netdev_priv(dev
);
903 dm9000_dbg(db
, 3, "%s:\n", __func__
);
905 if (db
->tx_pkt_cnt
> 1)
906 return NETDEV_TX_BUSY
;
908 spin_lock_irqsave(&db
->lock
, flags
);
910 /* Move data to DM9000 TX RAM */
911 writeb(DM9000_MWCMD
, db
->io_addr
);
913 (db
->outblk
)(db
->io_data
, skb
->data
, skb
->len
);
914 dev
->stats
.tx_bytes
+= skb
->len
;
917 /* TX control: First packet immediately send, second packet queue */
918 if (db
->tx_pkt_cnt
== 1) {
919 dm9000_send_packet(dev
, skb
->ip_summed
, skb
->len
);
922 db
->queue_pkt_len
= skb
->len
;
923 db
->queue_ip_summed
= skb
->ip_summed
;
924 netif_stop_queue(dev
);
927 spin_unlock_irqrestore(&db
->lock
, flags
);
936 * DM9000 interrupt handler
937 * receive the packet to upper layer, free the transmitted packet
940 static void dm9000_tx_done(struct net_device
*dev
, board_info_t
*db
)
942 int tx_status
= ior(db
, DM9000_NSR
); /* Got TX status */
944 if (tx_status
& (NSR_TX2END
| NSR_TX1END
)) {
945 /* One packet sent complete */
947 dev
->stats
.tx_packets
++;
949 if (netif_msg_tx_done(db
))
950 dev_dbg(db
->dev
, "tx done, NSR %02x\n", tx_status
);
952 /* Queue packet check & send */
953 if (db
->tx_pkt_cnt
> 0)
954 dm9000_send_packet(dev
, db
->queue_ip_summed
,
956 netif_wake_queue(dev
);
960 struct dm9000_rxhdr
{
967 * Received a packet and pass to upper layer
970 dm9000_rx(struct net_device
*dev
)
972 board_info_t
*db
= netdev_priv(dev
);
973 struct dm9000_rxhdr rxhdr
;
979 /* Check packet ready or not */
981 ior(db
, DM9000_MRCMDX
); /* Dummy read */
983 /* Get most updated data */
984 rxbyte
= readb(db
->io_data
);
986 /* Status check: this byte must be 0 or 1 */
987 if (rxbyte
& DM9000_PKT_ERR
) {
988 dev_warn(db
->dev
, "status check fail: %d\n", rxbyte
);
989 iow(db
, DM9000_RCR
, 0x00); /* Stop Device */
990 iow(db
, DM9000_ISR
, IMR_PAR
); /* Stop INT request */
994 if (!(rxbyte
& DM9000_PKT_RDY
))
997 /* A packet ready now & Get status/length */
999 writeb(DM9000_MRCMD
, db
->io_addr
);
1001 (db
->inblk
)(db
->io_data
, &rxhdr
, sizeof(rxhdr
));
1003 RxLen
= le16_to_cpu(rxhdr
.RxLen
);
1005 if (netif_msg_rx_status(db
))
1006 dev_dbg(db
->dev
, "RX: status %02x, length %04x\n",
1007 rxhdr
.RxStatus
, RxLen
);
1009 /* Packet Status check */
1012 if (netif_msg_rx_err(db
))
1013 dev_dbg(db
->dev
, "RX: Bad Packet (runt)\n");
1016 if (RxLen
> DM9000_PKT_MAX
) {
1017 dev_dbg(db
->dev
, "RST: RX Len:%x\n", RxLen
);
1020 /* rxhdr.RxStatus is identical to RSR register. */
1021 if (rxhdr
.RxStatus
& (RSR_FOE
| RSR_CE
| RSR_AE
|
1022 RSR_PLE
| RSR_RWTO
|
1023 RSR_LCS
| RSR_RF
)) {
1025 if (rxhdr
.RxStatus
& RSR_FOE
) {
1026 if (netif_msg_rx_err(db
))
1027 dev_dbg(db
->dev
, "fifo error\n");
1028 dev
->stats
.rx_fifo_errors
++;
1030 if (rxhdr
.RxStatus
& RSR_CE
) {
1031 if (netif_msg_rx_err(db
))
1032 dev_dbg(db
->dev
, "crc error\n");
1033 dev
->stats
.rx_crc_errors
++;
1035 if (rxhdr
.RxStatus
& RSR_RF
) {
1036 if (netif_msg_rx_err(db
))
1037 dev_dbg(db
->dev
, "length error\n");
1038 dev
->stats
.rx_length_errors
++;
1042 /* Move data from DM9000 */
1044 ((skb
= dev_alloc_skb(RxLen
+ 4)) != NULL
)) {
1045 skb_reserve(skb
, 2);
1046 rdptr
= (u8
*) skb_put(skb
, RxLen
- 4);
1048 /* Read received packet from RX SRAM */
1050 (db
->inblk
)(db
->io_data
, rdptr
, RxLen
);
1051 dev
->stats
.rx_bytes
+= RxLen
;
1053 /* Pass to upper layer */
1054 skb
->protocol
= eth_type_trans(skb
, dev
);
1056 if ((((rxbyte
& 0x1c) << 3) & rxbyte
) == 0)
1057 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
1059 skb
->ip_summed
= CHECKSUM_NONE
;
1062 dev
->stats
.rx_packets
++;
1065 /* need to dump the packet's data */
1067 (db
->dumpblk
)(db
->io_data
, RxLen
);
1069 } while (rxbyte
& DM9000_PKT_RDY
);
1072 static irqreturn_t
dm9000_interrupt(int irq
, void *dev_id
)
1074 struct net_device
*dev
= dev_id
;
1075 board_info_t
*db
= netdev_priv(dev
);
1077 unsigned long flags
;
1080 dm9000_dbg(db
, 3, "entering %s\n", __func__
);
1082 /* A real interrupt coming */
1084 /* holders of db->lock must always block IRQs */
1085 spin_lock_irqsave(&db
->lock
, flags
);
1087 /* Save previous register address */
1088 reg_save
= readb(db
->io_addr
);
1090 /* Disable all interrupts */
1091 iow(db
, DM9000_IMR
, IMR_PAR
);
1093 /* Got DM9000 interrupt status */
1094 int_status
= ior(db
, DM9000_ISR
); /* Got ISR */
1095 iow(db
, DM9000_ISR
, int_status
); /* Clear ISR status */
1097 if (netif_msg_intr(db
))
1098 dev_dbg(db
->dev
, "interrupt status %02x\n", int_status
);
1100 /* Received the coming packet */
1101 if (int_status
& ISR_PRS
)
1104 /* Trnasmit Interrupt check */
1105 if (int_status
& ISR_PTS
)
1106 dm9000_tx_done(dev
, db
);
1108 if (db
->type
!= TYPE_DM9000E
) {
1109 if (int_status
& ISR_LNKCHNG
) {
1110 /* fire a link-change request */
1111 schedule_delayed_work(&db
->phy_poll
, 1);
1115 /* Re-enable interrupt mask */
1116 iow(db
, DM9000_IMR
, db
->imr_all
);
1118 /* Restore previous register address */
1119 writeb(reg_save
, db
->io_addr
);
1121 spin_unlock_irqrestore(&db
->lock
, flags
);
1126 static irqreturn_t
dm9000_wol_interrupt(int irq
, void *dev_id
)
1128 struct net_device
*dev
= dev_id
;
1129 board_info_t
*db
= netdev_priv(dev
);
1130 unsigned long flags
;
1133 spin_lock_irqsave(&db
->lock
, flags
);
1135 nsr
= ior(db
, DM9000_NSR
);
1136 wcr
= ior(db
, DM9000_WCR
);
1138 dev_dbg(db
->dev
, "%s: NSR=0x%02x, WCR=0x%02x\n", __func__
, nsr
, wcr
);
1140 if (nsr
& NSR_WAKEST
) {
1141 /* clear, so we can avoid */
1142 iow(db
, DM9000_NSR
, NSR_WAKEST
);
1144 if (wcr
& WCR_LINKST
)
1145 dev_info(db
->dev
, "wake by link status change\n");
1146 if (wcr
& WCR_SAMPLEST
)
1147 dev_info(db
->dev
, "wake by sample packet\n");
1148 if (wcr
& WCR_MAGICST
)
1149 dev_info(db
->dev
, "wake by magic packet\n");
1150 if (!(wcr
& (WCR_LINKST
| WCR_SAMPLEST
| WCR_MAGICST
)))
1151 dev_err(db
->dev
, "wake signalled with no reason? "
1152 "NSR=0x%02x, WSR=0x%02x\n", nsr
, wcr
);
1156 spin_unlock_irqrestore(&db
->lock
, flags
);
1158 return (nsr
& NSR_WAKEST
) ? IRQ_HANDLED
: IRQ_NONE
;
1161 #ifdef CONFIG_NET_POLL_CONTROLLER
1165 static void dm9000_poll_controller(struct net_device
*dev
)
1167 disable_irq(dev
->irq
);
1168 dm9000_interrupt(dev
->irq
, dev
);
1169 enable_irq(dev
->irq
);
1174 * Open the interface.
1175 * The interface is opened whenever "ifconfig" actives it.
1178 dm9000_open(struct net_device
*dev
)
1180 board_info_t
*db
= netdev_priv(dev
);
1181 unsigned long irqflags
= db
->irq_res
->flags
& IRQF_TRIGGER_MASK
;
1183 if (netif_msg_ifup(db
))
1184 dev_dbg(db
->dev
, "enabling %s\n", dev
->name
);
1186 /* If there is no IRQ type specified, default to something that
1187 * may work, and tell the user that this is a problem */
1189 if (irqflags
== IRQF_TRIGGER_NONE
)
1190 dev_warn(db
->dev
, "WARNING: no IRQ resource flags set.\n");
1192 irqflags
|= IRQF_SHARED
;
1194 if (request_irq(dev
->irq
, dm9000_interrupt
, irqflags
, dev
->name
, dev
))
1197 /* Initialize DM9000 board */
1199 dm9000_init_dm9000(dev
);
1201 /* Init driver variable */
1204 mii_check_media(&db
->mii
, netif_msg_link(db
), 1);
1205 netif_start_queue(dev
);
1207 dm9000_schedule_poll(db
);
1213 * Sleep, either by using msleep() or if we are suspending, then
1214 * use mdelay() to sleep.
1216 static void dm9000_msleep(board_info_t
*db
, unsigned int ms
)
1225 * Read a word from phyxcer
1228 dm9000_phy_read(struct net_device
*dev
, int phy_reg_unused
, int reg
)
1230 board_info_t
*db
= netdev_priv(dev
);
1231 unsigned long flags
;
1232 unsigned int reg_save
;
1235 mutex_lock(&db
->addr_lock
);
1237 spin_lock_irqsave(&db
->lock
,flags
);
1239 /* Save previous register address */
1240 reg_save
= readb(db
->io_addr
);
1242 /* Fill the phyxcer register into REG_0C */
1243 iow(db
, DM9000_EPAR
, DM9000_PHY
| reg
);
1245 iow(db
, DM9000_EPCR
, EPCR_ERPRR
| EPCR_EPOS
); /* Issue phyxcer read command */
1247 writeb(reg_save
, db
->io_addr
);
1248 spin_unlock_irqrestore(&db
->lock
,flags
);
1250 dm9000_msleep(db
, 1); /* Wait read complete */
1252 spin_lock_irqsave(&db
->lock
,flags
);
1253 reg_save
= readb(db
->io_addr
);
1255 iow(db
, DM9000_EPCR
, 0x0); /* Clear phyxcer read command */
1257 /* The read data keeps on REG_0D & REG_0E */
1258 ret
= (ior(db
, DM9000_EPDRH
) << 8) | ior(db
, DM9000_EPDRL
);
1260 /* restore the previous address */
1261 writeb(reg_save
, db
->io_addr
);
1262 spin_unlock_irqrestore(&db
->lock
,flags
);
1264 mutex_unlock(&db
->addr_lock
);
1266 dm9000_dbg(db
, 5, "phy_read[%02x] -> %04x\n", reg
, ret
);
1271 * Write a word to phyxcer
1274 dm9000_phy_write(struct net_device
*dev
,
1275 int phyaddr_unused
, int reg
, int value
)
1277 board_info_t
*db
= netdev_priv(dev
);
1278 unsigned long flags
;
1279 unsigned long reg_save
;
1281 dm9000_dbg(db
, 5, "phy_write[%02x] = %04x\n", reg
, value
);
1282 mutex_lock(&db
->addr_lock
);
1284 spin_lock_irqsave(&db
->lock
,flags
);
1286 /* Save previous register address */
1287 reg_save
= readb(db
->io_addr
);
1289 /* Fill the phyxcer register into REG_0C */
1290 iow(db
, DM9000_EPAR
, DM9000_PHY
| reg
);
1292 /* Fill the written data into REG_0D & REG_0E */
1293 iow(db
, DM9000_EPDRL
, value
);
1294 iow(db
, DM9000_EPDRH
, value
>> 8);
1296 iow(db
, DM9000_EPCR
, EPCR_EPOS
| EPCR_ERPRW
); /* Issue phyxcer write command */
1298 writeb(reg_save
, db
->io_addr
);
1299 spin_unlock_irqrestore(&db
->lock
, flags
);
1301 dm9000_msleep(db
, 1); /* Wait write complete */
1303 spin_lock_irqsave(&db
->lock
,flags
);
1304 reg_save
= readb(db
->io_addr
);
1306 iow(db
, DM9000_EPCR
, 0x0); /* Clear phyxcer write command */
1308 /* restore the previous address */
1309 writeb(reg_save
, db
->io_addr
);
1311 spin_unlock_irqrestore(&db
->lock
, flags
);
1312 mutex_unlock(&db
->addr_lock
);
1316 dm9000_shutdown(struct net_device
*dev
)
1318 board_info_t
*db
= netdev_priv(dev
);
1321 dm9000_phy_write(dev
, 0, MII_BMCR
, BMCR_RESET
); /* PHY RESET */
1322 iow(db
, DM9000_GPR
, 0x01); /* Power-Down PHY */
1323 iow(db
, DM9000_IMR
, IMR_PAR
); /* Disable all interrupt */
1324 iow(db
, DM9000_RCR
, 0x00); /* Disable RX */
1328 * Stop the interface.
1329 * The interface is stopped when it is brought.
1332 dm9000_stop(struct net_device
*ndev
)
1334 board_info_t
*db
= netdev_priv(ndev
);
1336 if (netif_msg_ifdown(db
))
1337 dev_dbg(db
->dev
, "shutting down %s\n", ndev
->name
);
1339 cancel_delayed_work_sync(&db
->phy_poll
);
1341 netif_stop_queue(ndev
);
1342 netif_carrier_off(ndev
);
1344 /* free interrupt */
1345 free_irq(ndev
->irq
, ndev
);
1347 dm9000_shutdown(ndev
);
1352 static const struct net_device_ops dm9000_netdev_ops
= {
1353 .ndo_open
= dm9000_open
,
1354 .ndo_stop
= dm9000_stop
,
1355 .ndo_start_xmit
= dm9000_start_xmit
,
1356 .ndo_tx_timeout
= dm9000_timeout
,
1357 .ndo_set_multicast_list
= dm9000_hash_table
,
1358 .ndo_do_ioctl
= dm9000_ioctl
,
1359 .ndo_change_mtu
= eth_change_mtu
,
1360 .ndo_validate_addr
= eth_validate_addr
,
1361 .ndo_set_mac_address
= eth_mac_addr
,
1362 #ifdef CONFIG_NET_POLL_CONTROLLER
1363 .ndo_poll_controller
= dm9000_poll_controller
,
1368 * Search DM9000 board, allocate space and register it
1370 static int __devinit
1371 dm9000_probe(struct platform_device
*pdev
)
1373 struct dm9000_plat_data
*pdata
= pdev
->dev
.platform_data
;
1374 struct board_info
*db
; /* Point a board information structure */
1375 struct net_device
*ndev
;
1376 const unsigned char *mac_src
;
1382 /* Init network device */
1383 ndev
= alloc_etherdev(sizeof(struct board_info
));
1385 dev_err(&pdev
->dev
, "could not allocate device.\n");
1389 SET_NETDEV_DEV(ndev
, &pdev
->dev
);
1391 dev_dbg(&pdev
->dev
, "dm9000_probe()\n");
1393 /* setup board info structure */
1394 db
= netdev_priv(ndev
);
1396 db
->dev
= &pdev
->dev
;
1399 spin_lock_init(&db
->lock
);
1400 mutex_init(&db
->addr_lock
);
1402 INIT_DELAYED_WORK(&db
->phy_poll
, dm9000_poll_work
);
1404 db
->addr_res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1405 db
->data_res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 1);
1406 db
->irq_res
= platform_get_resource(pdev
, IORESOURCE_IRQ
, 0);
1408 if (db
->addr_res
== NULL
|| db
->data_res
== NULL
||
1409 db
->irq_res
== NULL
) {
1410 dev_err(db
->dev
, "insufficient resources\n");
1415 db
->irq_wake
= platform_get_irq(pdev
, 1);
1416 if (db
->irq_wake
>= 0) {
1417 dev_dbg(db
->dev
, "wakeup irq %d\n", db
->irq_wake
);
1419 ret
= request_irq(db
->irq_wake
, dm9000_wol_interrupt
,
1420 IRQF_SHARED
, dev_name(db
->dev
), ndev
);
1422 dev_err(db
->dev
, "cannot get wakeup irq (%d)\n", ret
);
1425 /* test to see if irq is really wakeup capable */
1426 ret
= set_irq_wake(db
->irq_wake
, 1);
1428 dev_err(db
->dev
, "irq %d cannot set wakeup (%d)\n",
1432 set_irq_wake(db
->irq_wake
, 0);
1433 db
->wake_supported
= 1;
1438 iosize
= resource_size(db
->addr_res
);
1439 db
->addr_req
= request_mem_region(db
->addr_res
->start
, iosize
,
1442 if (db
->addr_req
== NULL
) {
1443 dev_err(db
->dev
, "cannot claim address reg area\n");
1448 db
->io_addr
= ioremap(db
->addr_res
->start
, iosize
);
1450 if (db
->io_addr
== NULL
) {
1451 dev_err(db
->dev
, "failed to ioremap address reg\n");
1456 iosize
= resource_size(db
->data_res
);
1457 db
->data_req
= request_mem_region(db
->data_res
->start
, iosize
,
1460 if (db
->data_req
== NULL
) {
1461 dev_err(db
->dev
, "cannot claim data reg area\n");
1466 db
->io_data
= ioremap(db
->data_res
->start
, iosize
);
1468 if (db
->io_data
== NULL
) {
1469 dev_err(db
->dev
, "failed to ioremap data reg\n");
1474 /* fill in parameters for net-dev structure */
1475 ndev
->base_addr
= (unsigned long)db
->io_addr
;
1476 ndev
->irq
= db
->irq_res
->start
;
1478 /* ensure at least we have a default set of IO routines */
1479 dm9000_set_io(db
, iosize
);
1481 /* check to see if anything is being over-ridden */
1482 if (pdata
!= NULL
) {
1483 /* check to see if the driver wants to over-ride the
1484 * default IO width */
1486 if (pdata
->flags
& DM9000_PLATF_8BITONLY
)
1487 dm9000_set_io(db
, 1);
1489 if (pdata
->flags
& DM9000_PLATF_16BITONLY
)
1490 dm9000_set_io(db
, 2);
1492 if (pdata
->flags
& DM9000_PLATF_32BITONLY
)
1493 dm9000_set_io(db
, 4);
1495 /* check to see if there are any IO routine
1498 if (pdata
->inblk
!= NULL
)
1499 db
->inblk
= pdata
->inblk
;
1501 if (pdata
->outblk
!= NULL
)
1502 db
->outblk
= pdata
->outblk
;
1504 if (pdata
->dumpblk
!= NULL
)
1505 db
->dumpblk
= pdata
->dumpblk
;
1507 db
->flags
= pdata
->flags
;
1510 #ifdef CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL
1511 db
->flags
|= DM9000_PLATF_SIMPLE_PHY
;
1516 /* try multiple times, DM9000 sometimes gets the read wrong */
1517 for (i
= 0; i
< 8; i
++) {
1518 id_val
= ior(db
, DM9000_VIDL
);
1519 id_val
|= (u32
)ior(db
, DM9000_VIDH
) << 8;
1520 id_val
|= (u32
)ior(db
, DM9000_PIDL
) << 16;
1521 id_val
|= (u32
)ior(db
, DM9000_PIDH
) << 24;
1523 if (id_val
== DM9000_ID
)
1525 dev_err(db
->dev
, "read wrong id 0x%08x\n", id_val
);
1528 if (id_val
!= DM9000_ID
) {
1529 dev_err(db
->dev
, "wrong id: 0x%08x\n", id_val
);
1534 /* Identify what type of DM9000 we are working on */
1536 id_val
= ior(db
, DM9000_CHIPR
);
1537 dev_dbg(db
->dev
, "dm9000 revision 0x%02x\n", id_val
);
1541 db
->type
= TYPE_DM9000A
;
1544 db
->type
= TYPE_DM9000B
;
1547 dev_dbg(db
->dev
, "ID %02x => defaulting to DM9000E\n", id_val
);
1548 db
->type
= TYPE_DM9000E
;
1551 /* dm9000a/b are capable of hardware checksum offload */
1552 if (db
->type
== TYPE_DM9000A
|| db
->type
== TYPE_DM9000B
) {
1555 ndev
->features
|= NETIF_F_IP_CSUM
;
1558 /* from this point we assume that we have found a DM9000 */
1560 /* driver system function */
1563 ndev
->netdev_ops
= &dm9000_netdev_ops
;
1564 ndev
->watchdog_timeo
= msecs_to_jiffies(watchdog
);
1565 ndev
->ethtool_ops
= &dm9000_ethtool_ops
;
1567 db
->msg_enable
= NETIF_MSG_LINK
;
1568 db
->mii
.phy_id_mask
= 0x1f;
1569 db
->mii
.reg_num_mask
= 0x1f;
1570 db
->mii
.force_media
= 0;
1571 db
->mii
.full_duplex
= 0;
1573 db
->mii
.mdio_read
= dm9000_phy_read
;
1574 db
->mii
.mdio_write
= dm9000_phy_write
;
1578 /* try reading the node address from the attached EEPROM */
1579 for (i
= 0; i
< 6; i
+= 2)
1580 dm9000_read_eeprom(db
, i
/ 2, ndev
->dev_addr
+i
);
1582 if (!is_valid_ether_addr(ndev
->dev_addr
) && pdata
!= NULL
) {
1583 mac_src
= "platform data";
1584 memcpy(ndev
->dev_addr
, pdata
->dev_addr
, 6);
1587 if (!is_valid_ether_addr(ndev
->dev_addr
)) {
1588 /* try reading from mac */
1591 for (i
= 0; i
< 6; i
++)
1592 ndev
->dev_addr
[i
] = ior(db
, i
+DM9000_PAR
);
1595 if (!is_valid_ether_addr(ndev
->dev_addr
))
1596 dev_warn(db
->dev
, "%s: Invalid ethernet MAC address. Please "
1597 "set using ifconfig\n", ndev
->name
);
1599 platform_set_drvdata(pdev
, ndev
);
1600 ret
= register_netdev(ndev
);
1603 printk(KERN_INFO
"%s: dm9000%c at %p,%p IRQ %d MAC: %pM (%s)\n",
1604 ndev
->name
, dm9000_type_to_char(db
->type
),
1605 db
->io_addr
, db
->io_data
, ndev
->irq
,
1606 ndev
->dev_addr
, mac_src
);
1610 dev_err(db
->dev
, "not found (%d).\n", ret
);
1612 dm9000_release_board(pdev
, db
);
1619 dm9000_drv_suspend(struct device
*dev
)
1621 struct platform_device
*pdev
= to_platform_device(dev
);
1622 struct net_device
*ndev
= platform_get_drvdata(pdev
);
1626 db
= netdev_priv(ndev
);
1629 if (!netif_running(ndev
))
1632 netif_device_detach(ndev
);
1634 /* only shutdown if not using WoL */
1635 if (!db
->wake_state
)
1636 dm9000_shutdown(ndev
);
1642 dm9000_drv_resume(struct device
*dev
)
1644 struct platform_device
*pdev
= to_platform_device(dev
);
1645 struct net_device
*ndev
= platform_get_drvdata(pdev
);
1646 board_info_t
*db
= netdev_priv(ndev
);
1649 if (netif_running(ndev
)) {
1650 /* reset if we were not in wake mode to ensure if
1651 * the device was powered off it is in a known state */
1652 if (!db
->wake_state
) {
1654 dm9000_init_dm9000(ndev
);
1657 netif_device_attach(ndev
);
1665 static const struct dev_pm_ops dm9000_drv_pm_ops
= {
1666 .suspend
= dm9000_drv_suspend
,
1667 .resume
= dm9000_drv_resume
,
1670 static int __devexit
1671 dm9000_drv_remove(struct platform_device
*pdev
)
1673 struct net_device
*ndev
= platform_get_drvdata(pdev
);
1675 platform_set_drvdata(pdev
, NULL
);
1677 unregister_netdev(ndev
);
1678 dm9000_release_board(pdev
, (board_info_t
*) netdev_priv(ndev
));
1679 free_netdev(ndev
); /* free device structure */
1681 dev_dbg(&pdev
->dev
, "released and freed device\n");
1685 static struct platform_driver dm9000_driver
= {
1688 .owner
= THIS_MODULE
,
1689 .pm
= &dm9000_drv_pm_ops
,
1691 .probe
= dm9000_probe
,
1692 .remove
= __devexit_p(dm9000_drv_remove
),
1698 printk(KERN_INFO
"%s Ethernet Driver, V%s\n", CARDNAME
, DRV_VERSION
);
1700 return platform_driver_register(&dm9000_driver
);
1704 dm9000_cleanup(void)
1706 platform_driver_unregister(&dm9000_driver
);
1709 module_init(dm9000_init
);
1710 module_exit(dm9000_cleanup
);
1712 MODULE_AUTHOR("Sascha Hauer, Ben Dooks");
1713 MODULE_DESCRIPTION("Davicom DM9000 network driver");
1714 MODULE_LICENSE("GPL");
1715 MODULE_ALIAS("platform:dm9000");