1 /* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */
3 Written 1998-2001 by Donald Becker.
5 Current Maintainer: Roger Luethi <rl@hellgate.ch>
7 This software may be used and distributed according to the terms of
8 the GNU General Public License (GPL), incorporated herein by reference.
9 Drivers based on or derived from this code fall under the GPL and must
10 retain the authorship, copyright and license notice. This file is not
11 a complete program and may only be used when the entire operating
12 system is licensed under the GPL.
14 This driver is designed for the VIA VT86C100A Rhine-I.
15 It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM
16 and management NIC 6105M).
18 The author may be reached as becker@scyld.com, or C/O
19 Scyld Computing Corporation
20 410 Severn Ave., Suite 210
24 This driver contains some changes from the original Donald Becker
25 version. He may or may not be interested in bug reports on this
26 code. You can find his versions at:
27 http://www.scyld.com/network/via-rhine.html
28 [link no longer provides useful info -jgarzik]
32 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
34 #define DRV_NAME "via-rhine"
35 #define DRV_VERSION "1.5.0"
36 #define DRV_RELDATE "2010-10-09"
39 /* A few user-configurable values.
40 These may be modified when a driver module is loaded. */
43 static int debug
= 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
44 static int max_interrupt_work
= 20;
46 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
47 Setting to > 1518 effectively disables this feature. */
48 #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
49 defined(CONFIG_SPARC) || defined(__ia64__) || \
50 defined(__sh__) || defined(__mips__)
51 static int rx_copybreak
= 1518;
53 static int rx_copybreak
;
56 /* Work-around for broken BIOSes: they are unable to get the chip back out of
57 power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
61 * In case you are looking for 'options[]' or 'full_duplex[]', they
62 * are gone. Use ethtool(8) instead.
65 /* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
66 The Rhine has a 64 element 8390-like hash table. */
67 static const int multicast_filter_limit
= 32;
70 /* Operational parameters that are set at compile time. */
72 /* Keep the ring sizes a power of two for compile efficiency.
73 The compiler will convert <unsigned>'%'<2^N> into a bit mask.
74 Making the Tx ring too large decreases the effectiveness of channel
75 bonding and packet priority.
76 There are no ill effects from too-large receive rings. */
77 #define TX_RING_SIZE 16
78 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
79 #define RX_RING_SIZE 64
81 /* Operational parameters that usually are not changed. */
83 /* Time in jiffies before concluding the transmitter is hung. */
84 #define TX_TIMEOUT (2*HZ)
86 #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
88 #include <linux/module.h>
89 #include <linux/moduleparam.h>
90 #include <linux/kernel.h>
91 #include <linux/string.h>
92 #include <linux/timer.h>
93 #include <linux/errno.h>
94 #include <linux/ioport.h>
95 #include <linux/interrupt.h>
96 #include <linux/pci.h>
97 #include <linux/dma-mapping.h>
98 #include <linux/netdevice.h>
99 #include <linux/etherdevice.h>
100 #include <linux/skbuff.h>
101 #include <linux/init.h>
102 #include <linux/delay.h>
103 #include <linux/mii.h>
104 #include <linux/ethtool.h>
105 #include <linux/crc32.h>
106 #include <linux/if_vlan.h>
107 #include <linux/bitops.h>
108 #include <linux/workqueue.h>
109 #include <asm/processor.h> /* Processor type for cache alignment. */
112 #include <asm/uaccess.h>
113 #include <linux/dmi.h>
115 /* These identify the driver base version and may not be removed. */
116 static const char version
[] __devinitconst
=
117 "v1.10-LK" DRV_VERSION
" " DRV_RELDATE
" Written by Donald Becker";
119 /* This driver was written to use PCI memory space. Some early versions
120 of the Rhine may only work correctly with I/O space accesses. */
121 #ifdef CONFIG_VIA_RHINE_MMIO
126 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
127 MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
128 MODULE_LICENSE("GPL");
130 module_param(max_interrupt_work
, int, 0);
131 module_param(debug
, int, 0);
132 module_param(rx_copybreak
, int, 0);
133 module_param(avoid_D3
, bool, 0);
134 MODULE_PARM_DESC(max_interrupt_work
, "VIA Rhine maximum events handled per interrupt");
135 MODULE_PARM_DESC(debug
, "VIA Rhine debug level (0-7)");
136 MODULE_PARM_DESC(rx_copybreak
, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
137 MODULE_PARM_DESC(avoid_D3
, "Avoid power state D3 (work-around for broken BIOSes)");
145 I. Board Compatibility
147 This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
150 II. Board-specific settings
152 Boards with this chip are functional only in a bus-master PCI slot.
154 Many operational settings are loaded from the EEPROM to the Config word at
155 offset 0x78. For most of these settings, this driver assumes that they are
157 If this driver is compiled to use PCI memory space operations the EEPROM
158 must be configured to enable memory ops.
160 III. Driver operation
164 This driver uses two statically allocated fixed-size descriptor lists
165 formed into rings by a branch from the final descriptor to the beginning of
166 the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
168 IIIb/c. Transmit/Receive Structure
170 This driver attempts to use a zero-copy receive and transmit scheme.
172 Alas, all data buffers are required to start on a 32 bit boundary, so
173 the driver must often copy transmit packets into bounce buffers.
175 The driver allocates full frame size skbuffs for the Rx ring buffers at
176 open() time and passes the skb->data field to the chip as receive data
177 buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
178 a fresh skbuff is allocated and the frame is copied to the new skbuff.
179 When the incoming frame is larger, the skbuff is passed directly up the
180 protocol stack. Buffers consumed this way are replaced by newly allocated
181 skbuffs in the last phase of rhine_rx().
183 The RX_COPYBREAK value is chosen to trade-off the memory wasted by
184 using a full-sized skbuff for small frames vs. the copying costs of larger
185 frames. New boards are typically used in generously configured machines
186 and the underfilled buffers have negligible impact compared to the benefit of
187 a single allocation size, so the default value of zero results in never
188 copying packets. When copying is done, the cost is usually mitigated by using
189 a combined copy/checksum routine. Copying also preloads the cache, which is
190 most useful with small frames.
192 Since the VIA chips are only able to transfer data to buffers on 32 bit
193 boundaries, the IP header at offset 14 in an ethernet frame isn't
194 longword aligned for further processing. Copying these unaligned buffers
195 has the beneficial effect of 16-byte aligning the IP header.
197 IIId. Synchronization
199 The driver runs as two independent, single-threaded flows of control. One
200 is the send-packet routine, which enforces single-threaded use by the
201 netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler,
202 which is single threaded by the hardware and interrupt handling software.
204 The send packet thread has partial control over the Tx ring. It locks the
205 netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in
206 the ring is not available it stops the transmit queue by
207 calling netif_stop_queue.
209 The interrupt handler has exclusive control over the Rx ring and records stats
210 from the Tx ring. After reaping the stats, it marks the Tx queue entry as
211 empty by incrementing the dirty_tx mark. If at least half of the entries in
212 the Rx ring are available the transmit queue is woken up if it was stopped.
218 Preliminary VT86C100A manual from http://www.via.com.tw/
219 http://www.scyld.com/expert/100mbps.html
220 http://www.scyld.com/expert/NWay.html
221 ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf
222 ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF
227 The VT86C100A manual is not reliable information.
228 The 3043 chip does not handle unaligned transmit or receive buffers, resulting
229 in significant performance degradation for bounce buffer copies on transmit
230 and unaligned IP headers on receive.
231 The chip does not pad to minimum transmit length.
236 /* This table drives the PCI probe routines. It's mostly boilerplate in all
237 of the drivers, and will likely be provided by some future kernel.
238 Note the matching code -- the first table entry matchs all 56** cards but
239 second only the 1234 card.
246 VT8231
= 0x50, /* Integrated MAC */
247 VT8233
= 0x60, /* Integrated MAC */
248 VT8235
= 0x74, /* Integrated MAC */
249 VT8237
= 0x78, /* Integrated MAC */
256 VT6105M
= 0x90, /* Management adapter */
260 rqWOL
= 0x0001, /* Wake-On-LAN support */
261 rqForceReset
= 0x0002,
262 rq6patterns
= 0x0040, /* 6 instead of 4 patterns for WOL */
263 rqStatusWBRace
= 0x0080, /* Tx Status Writeback Error possible */
264 rqRhineI
= 0x0100, /* See comment below */
267 * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable
268 * MMIO as well as for the collision counter and the Tx FIFO underflow
269 * indicator. In addition, Tx and Rx buffers need to 4 byte aligned.
272 /* Beware of PCI posted writes */
273 #define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0)
275 static DEFINE_PCI_DEVICE_TABLE(rhine_pci_tbl
) = {
276 { 0x1106, 0x3043, PCI_ANY_ID
, PCI_ANY_ID
, }, /* VT86C100A */
277 { 0x1106, 0x3065, PCI_ANY_ID
, PCI_ANY_ID
, }, /* VT6102 */
278 { 0x1106, 0x3106, PCI_ANY_ID
, PCI_ANY_ID
, }, /* 6105{,L,LOM} */
279 { 0x1106, 0x3053, PCI_ANY_ID
, PCI_ANY_ID
, }, /* VT6105M */
280 { } /* terminate list */
282 MODULE_DEVICE_TABLE(pci
, rhine_pci_tbl
);
285 /* Offsets to the device registers. */
286 enum register_offsets
{
287 StationAddr
=0x00, RxConfig
=0x06, TxConfig
=0x07, ChipCmd
=0x08,
288 ChipCmd1
=0x09, TQWake
=0x0A,
289 IntrStatus
=0x0C, IntrEnable
=0x0E,
290 MulticastFilter0
=0x10, MulticastFilter1
=0x14,
291 RxRingPtr
=0x18, TxRingPtr
=0x1C, GFIFOTest
=0x54,
292 MIIPhyAddr
=0x6C, MIIStatus
=0x6D, PCIBusConfig
=0x6E, PCIBusConfig1
=0x6F,
293 MIICmd
=0x70, MIIRegAddr
=0x71, MIIData
=0x72, MACRegEEcsr
=0x74,
294 ConfigA
=0x78, ConfigB
=0x79, ConfigC
=0x7A, ConfigD
=0x7B,
295 RxMissed
=0x7C, RxCRCErrs
=0x7E, MiscCmd
=0x81,
296 StickyHW
=0x83, IntrStatus2
=0x84,
297 CamMask
=0x88, CamCon
=0x92, CamAddr
=0x93,
298 WOLcrSet
=0xA0, PwcfgSet
=0xA1, WOLcgSet
=0xA3, WOLcrClr
=0xA4,
299 WOLcrClr1
=0xA6, WOLcgClr
=0xA7,
300 PwrcsrSet
=0xA8, PwrcsrSet1
=0xA9, PwrcsrClr
=0xAC, PwrcsrClr1
=0xAD,
303 /* Bits in ConfigD */
305 BackOptional
=0x01, BackModify
=0x02,
306 BackCaptureEffect
=0x04, BackRandom
=0x08
309 /* Bits in the TxConfig (TCR) register */
312 TCR_LB0
=0x02, /* loopback[0] */
313 TCR_LB1
=0x04, /* loopback[1] */
321 /* Bits in the CamCon (CAMC) register */
329 /* Bits in the PCIBusConfig1 (BCR1) register */
337 BCR1_TXQNOBK
=0x40, /* for VT6105 */
338 BCR1_VIDFR
=0x80, /* for VT6105 */
339 BCR1_MED0
=0x40, /* for VT6102 */
340 BCR1_MED1
=0x80, /* for VT6102 */
344 /* Registers we check that mmio and reg are the same. */
345 static const int mmio_verify_registers
[] = {
346 RxConfig
, TxConfig
, IntrEnable
, ConfigA
, ConfigB
, ConfigC
, ConfigD
,
351 /* Bits in the interrupt status/mask registers. */
352 enum intr_status_bits
{
353 IntrRxDone
=0x0001, IntrRxErr
=0x0004, IntrRxEmpty
=0x0020,
354 IntrTxDone
=0x0002, IntrTxError
=0x0008, IntrTxUnderrun
=0x0210,
356 IntrStatsMax
=0x0080, IntrRxEarly
=0x0100,
357 IntrRxOverflow
=0x0400, IntrRxDropped
=0x0800, IntrRxNoBuf
=0x1000,
358 IntrTxAborted
=0x2000, IntrLinkChange
=0x4000,
360 IntrNormalSummary
=0x0003, IntrAbnormalSummary
=0xC260,
361 IntrTxDescRace
=0x080000, /* mapped from IntrStatus2 */
362 IntrTxErrSummary
=0x082218,
365 /* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */
374 /* The Rx and Tx buffer descriptors. */
377 __le32 desc_length
; /* Chain flag, Buffer/frame length */
383 __le32 desc_length
; /* Chain flag, Tx Config, Frame length */
388 /* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */
389 #define TXDESC 0x00e08000
391 enum rx_status_bits
{
392 RxOK
=0x8000, RxWholePkt
=0x0300, RxErr
=0x008F
395 /* Bits in *_desc.*_status */
396 enum desc_status_bits
{
400 /* Bits in *_desc.*_length */
401 enum desc_length_bits
{
405 /* Bits in ChipCmd. */
407 CmdInit
=0x01, CmdStart
=0x02, CmdStop
=0x04, CmdRxOn
=0x08,
408 CmdTxOn
=0x10, Cmd1TxDemand
=0x20, CmdRxDemand
=0x40,
409 Cmd1EarlyRx
=0x01, Cmd1EarlyTx
=0x02, Cmd1FDuplex
=0x04,
410 Cmd1NoTxPoll
=0x08, Cmd1Reset
=0x80,
413 struct rhine_private
{
414 /* Bit mask for configured VLAN ids */
415 unsigned long active_vlans
[BITS_TO_LONGS(VLAN_N_VID
)];
417 /* Descriptor rings */
418 struct rx_desc
*rx_ring
;
419 struct tx_desc
*tx_ring
;
420 dma_addr_t rx_ring_dma
;
421 dma_addr_t tx_ring_dma
;
423 /* The addresses of receive-in-place skbuffs. */
424 struct sk_buff
*rx_skbuff
[RX_RING_SIZE
];
425 dma_addr_t rx_skbuff_dma
[RX_RING_SIZE
];
427 /* The saved address of a sent-in-place packet/buffer, for later free(). */
428 struct sk_buff
*tx_skbuff
[TX_RING_SIZE
];
429 dma_addr_t tx_skbuff_dma
[TX_RING_SIZE
];
431 /* Tx bounce buffers (Rhine-I only) */
432 unsigned char *tx_buf
[TX_RING_SIZE
];
433 unsigned char *tx_bufs
;
434 dma_addr_t tx_bufs_dma
;
436 struct pci_dev
*pdev
;
438 struct net_device
*dev
;
439 struct napi_struct napi
;
441 struct work_struct reset_task
;
443 /* Frequently used values: keep some adjacent for cache effect. */
445 struct rx_desc
*rx_head_desc
;
446 unsigned int cur_rx
, dirty_rx
; /* Producer/consumer ring indices */
447 unsigned int cur_tx
, dirty_tx
;
448 unsigned int rx_buf_sz
; /* Based on MTU+slack. */
451 u8 tx_thresh
, rx_thresh
;
453 struct mii_if_info mii_if
;
457 #define BYTE_REG_BITS_ON(x, p) do { iowrite8((ioread8((p))|(x)), (p)); } while (0)
458 #define WORD_REG_BITS_ON(x, p) do { iowrite16((ioread16((p))|(x)), (p)); } while (0)
459 #define DWORD_REG_BITS_ON(x, p) do { iowrite32((ioread32((p))|(x)), (p)); } while (0)
461 #define BYTE_REG_BITS_IS_ON(x, p) (ioread8((p)) & (x))
462 #define WORD_REG_BITS_IS_ON(x, p) (ioread16((p)) & (x))
463 #define DWORD_REG_BITS_IS_ON(x, p) (ioread32((p)) & (x))
465 #define BYTE_REG_BITS_OFF(x, p) do { iowrite8(ioread8((p)) & (~(x)), (p)); } while (0)
466 #define WORD_REG_BITS_OFF(x, p) do { iowrite16(ioread16((p)) & (~(x)), (p)); } while (0)
467 #define DWORD_REG_BITS_OFF(x, p) do { iowrite32(ioread32((p)) & (~(x)), (p)); } while (0)
469 #define BYTE_REG_BITS_SET(x, m, p) do { iowrite8((ioread8((p)) & (~(m)))|(x), (p)); } while (0)
470 #define WORD_REG_BITS_SET(x, m, p) do { iowrite16((ioread16((p)) & (~(m)))|(x), (p)); } while (0)
471 #define DWORD_REG_BITS_SET(x, m, p) do { iowrite32((ioread32((p)) & (~(m)))|(x), (p)); } while (0)
474 static int mdio_read(struct net_device
*dev
, int phy_id
, int location
);
475 static void mdio_write(struct net_device
*dev
, int phy_id
, int location
, int value
);
476 static int rhine_open(struct net_device
*dev
);
477 static void rhine_reset_task(struct work_struct
*work
);
478 static void rhine_tx_timeout(struct net_device
*dev
);
479 static netdev_tx_t
rhine_start_tx(struct sk_buff
*skb
,
480 struct net_device
*dev
);
481 static irqreturn_t
rhine_interrupt(int irq
, void *dev_instance
);
482 static void rhine_tx(struct net_device
*dev
);
483 static int rhine_rx(struct net_device
*dev
, int limit
);
484 static void rhine_error(struct net_device
*dev
, int intr_status
);
485 static void rhine_set_rx_mode(struct net_device
*dev
);
486 static struct net_device_stats
*rhine_get_stats(struct net_device
*dev
);
487 static int netdev_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
);
488 static const struct ethtool_ops netdev_ethtool_ops
;
489 static int rhine_close(struct net_device
*dev
);
490 static void rhine_shutdown (struct pci_dev
*pdev
);
491 static void rhine_vlan_rx_add_vid(struct net_device
*dev
, unsigned short vid
);
492 static void rhine_vlan_rx_kill_vid(struct net_device
*dev
, unsigned short vid
);
493 static void rhine_set_cam(void __iomem
*ioaddr
, int idx
, u8
*addr
);
494 static void rhine_set_vlan_cam(void __iomem
*ioaddr
, int idx
, u8
*addr
);
495 static void rhine_set_cam_mask(void __iomem
*ioaddr
, u32 mask
);
496 static void rhine_set_vlan_cam_mask(void __iomem
*ioaddr
, u32 mask
);
497 static void rhine_init_cam_filter(struct net_device
*dev
);
498 static void rhine_update_vcam(struct net_device
*dev
);
500 #define RHINE_WAIT_FOR(condition) \
503 while (!(condition) && --i) \
505 if (debug > 1 && i < 512) \
506 pr_info("%4d cycles used @ %s:%d\n", \
507 1024 - i, __func__, __LINE__); \
510 static inline u32
get_intr_status(struct net_device
*dev
)
512 struct rhine_private
*rp
= netdev_priv(dev
);
513 void __iomem
*ioaddr
= rp
->base
;
516 intr_status
= ioread16(ioaddr
+ IntrStatus
);
517 /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
518 if (rp
->quirks
& rqStatusWBRace
)
519 intr_status
|= ioread8(ioaddr
+ IntrStatus2
) << 16;
524 * Get power related registers into sane state.
525 * Notify user about past WOL event.
527 static void rhine_power_init(struct net_device
*dev
)
529 struct rhine_private
*rp
= netdev_priv(dev
);
530 void __iomem
*ioaddr
= rp
->base
;
533 if (rp
->quirks
& rqWOL
) {
534 /* Make sure chip is in power state D0 */
535 iowrite8(ioread8(ioaddr
+ StickyHW
) & 0xFC, ioaddr
+ StickyHW
);
537 /* Disable "force PME-enable" */
538 iowrite8(0x80, ioaddr
+ WOLcgClr
);
540 /* Clear power-event config bits (WOL) */
541 iowrite8(0xFF, ioaddr
+ WOLcrClr
);
542 /* More recent cards can manage two additional patterns */
543 if (rp
->quirks
& rq6patterns
)
544 iowrite8(0x03, ioaddr
+ WOLcrClr1
);
546 /* Save power-event status bits */
547 wolstat
= ioread8(ioaddr
+ PwrcsrSet
);
548 if (rp
->quirks
& rq6patterns
)
549 wolstat
|= (ioread8(ioaddr
+ PwrcsrSet1
) & 0x03) << 8;
551 /* Clear power-event status bits */
552 iowrite8(0xFF, ioaddr
+ PwrcsrClr
);
553 if (rp
->quirks
& rq6patterns
)
554 iowrite8(0x03, ioaddr
+ PwrcsrClr1
);
560 reason
= "Magic packet";
563 reason
= "Link went up";
566 reason
= "Link went down";
569 reason
= "Unicast packet";
572 reason
= "Multicast/broadcast packet";
577 netdev_info(dev
, "Woke system up. Reason: %s\n",
583 static void rhine_chip_reset(struct net_device
*dev
)
585 struct rhine_private
*rp
= netdev_priv(dev
);
586 void __iomem
*ioaddr
= rp
->base
;
588 iowrite8(Cmd1Reset
, ioaddr
+ ChipCmd1
);
591 if (ioread8(ioaddr
+ ChipCmd1
) & Cmd1Reset
) {
592 netdev_info(dev
, "Reset not complete yet. Trying harder.\n");
595 if (rp
->quirks
& rqForceReset
)
596 iowrite8(0x40, ioaddr
+ MiscCmd
);
598 /* Reset can take somewhat longer (rare) */
599 RHINE_WAIT_FOR(!(ioread8(ioaddr
+ ChipCmd1
) & Cmd1Reset
));
603 netdev_info(dev
, "Reset %s\n",
604 (ioread8(ioaddr
+ ChipCmd1
) & Cmd1Reset
) ?
605 "failed" : "succeeded");
609 static void enable_mmio(long pioaddr
, u32 quirks
)
612 if (quirks
& rqRhineI
) {
613 /* More recent docs say that this bit is reserved ... */
614 n
= inb(pioaddr
+ ConfigA
) | 0x20;
615 outb(n
, pioaddr
+ ConfigA
);
617 n
= inb(pioaddr
+ ConfigD
) | 0x80;
618 outb(n
, pioaddr
+ ConfigD
);
624 * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM
625 * (plus 0x6C for Rhine-I/II)
627 static void __devinit
rhine_reload_eeprom(long pioaddr
, struct net_device
*dev
)
629 struct rhine_private
*rp
= netdev_priv(dev
);
630 void __iomem
*ioaddr
= rp
->base
;
632 outb(0x20, pioaddr
+ MACRegEEcsr
);
633 RHINE_WAIT_FOR(!(inb(pioaddr
+ MACRegEEcsr
) & 0x20));
637 * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable
638 * MMIO. If reloading EEPROM was done first this could be avoided, but
639 * it is not known if that still works with the "win98-reboot" problem.
641 enable_mmio(pioaddr
, rp
->quirks
);
644 /* Turn off EEPROM-controlled wake-up (magic packet) */
645 if (rp
->quirks
& rqWOL
)
646 iowrite8(ioread8(ioaddr
+ ConfigA
) & 0xFC, ioaddr
+ ConfigA
);
650 #ifdef CONFIG_NET_POLL_CONTROLLER
651 static void rhine_poll(struct net_device
*dev
)
653 disable_irq(dev
->irq
);
654 rhine_interrupt(dev
->irq
, (void *)dev
);
655 enable_irq(dev
->irq
);
659 static int rhine_napipoll(struct napi_struct
*napi
, int budget
)
661 struct rhine_private
*rp
= container_of(napi
, struct rhine_private
, napi
);
662 struct net_device
*dev
= rp
->dev
;
663 void __iomem
*ioaddr
= rp
->base
;
666 work_done
= rhine_rx(dev
, budget
);
668 if (work_done
< budget
) {
671 iowrite16(IntrRxDone
| IntrRxErr
| IntrRxEmpty
| IntrRxOverflow
|
672 IntrRxDropped
| IntrRxNoBuf
| IntrTxAborted
|
673 IntrTxDone
| IntrTxError
| IntrTxUnderrun
|
674 IntrPCIErr
| IntrStatsMax
| IntrLinkChange
,
675 ioaddr
+ IntrEnable
);
680 static void __devinit
rhine_hw_init(struct net_device
*dev
, long pioaddr
)
682 struct rhine_private
*rp
= netdev_priv(dev
);
684 /* Reset the chip to erase previous misconfiguration. */
685 rhine_chip_reset(dev
);
687 /* Rhine-I needs extra time to recuperate before EEPROM reload */
688 if (rp
->quirks
& rqRhineI
)
691 /* Reload EEPROM controlled bytes cleared by soft reset */
692 rhine_reload_eeprom(pioaddr
, dev
);
695 static const struct net_device_ops rhine_netdev_ops
= {
696 .ndo_open
= rhine_open
,
697 .ndo_stop
= rhine_close
,
698 .ndo_start_xmit
= rhine_start_tx
,
699 .ndo_get_stats
= rhine_get_stats
,
700 .ndo_set_rx_mode
= rhine_set_rx_mode
,
701 .ndo_change_mtu
= eth_change_mtu
,
702 .ndo_validate_addr
= eth_validate_addr
,
703 .ndo_set_mac_address
= eth_mac_addr
,
704 .ndo_do_ioctl
= netdev_ioctl
,
705 .ndo_tx_timeout
= rhine_tx_timeout
,
706 .ndo_vlan_rx_add_vid
= rhine_vlan_rx_add_vid
,
707 .ndo_vlan_rx_kill_vid
= rhine_vlan_rx_kill_vid
,
708 #ifdef CONFIG_NET_POLL_CONTROLLER
709 .ndo_poll_controller
= rhine_poll
,
713 static int __devinit
rhine_init_one(struct pci_dev
*pdev
,
714 const struct pci_device_id
*ent
)
716 struct net_device
*dev
;
717 struct rhine_private
*rp
;
722 void __iomem
*ioaddr
;
731 /* when built into the kernel, we only print version if device is found */
733 pr_info_once("%s\n", version
);
740 if (pdev
->revision
< VTunknown0
) {
744 else if (pdev
->revision
>= VT6102
) {
745 quirks
= rqWOL
| rqForceReset
;
746 if (pdev
->revision
< VT6105
) {
748 quirks
|= rqStatusWBRace
; /* Rhine-II exclusive */
751 phy_id
= 1; /* Integrated PHY, phy_id fixed to 1 */
752 if (pdev
->revision
>= VT6105_B0
)
753 quirks
|= rq6patterns
;
754 if (pdev
->revision
< VT6105M
)
757 name
= "Rhine III (Management Adapter)";
761 rc
= pci_enable_device(pdev
);
765 /* this should always be supported */
766 rc
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
769 "32-bit PCI DMA addresses not supported by the card!?\n");
774 if ((pci_resource_len(pdev
, 0) < io_size
) ||
775 (pci_resource_len(pdev
, 1) < io_size
)) {
777 dev_err(&pdev
->dev
, "Insufficient PCI resources, aborting\n");
781 pioaddr
= pci_resource_start(pdev
, 0);
782 memaddr
= pci_resource_start(pdev
, 1);
784 pci_set_master(pdev
);
786 dev
= alloc_etherdev(sizeof(struct rhine_private
));
789 dev_err(&pdev
->dev
, "alloc_etherdev failed\n");
792 SET_NETDEV_DEV(dev
, &pdev
->dev
);
794 rp
= netdev_priv(dev
);
797 rp
->pioaddr
= pioaddr
;
800 rc
= pci_request_regions(pdev
, DRV_NAME
);
802 goto err_out_free_netdev
;
804 ioaddr
= pci_iomap(pdev
, bar
, io_size
);
808 "ioremap failed for device %s, region 0x%X @ 0x%lX\n",
809 pci_name(pdev
), io_size
, memaddr
);
810 goto err_out_free_res
;
814 enable_mmio(pioaddr
, quirks
);
816 /* Check that selected MMIO registers match the PIO ones */
818 while (mmio_verify_registers
[i
]) {
819 int reg
= mmio_verify_registers
[i
++];
820 unsigned char a
= inb(pioaddr
+reg
);
821 unsigned char b
= readb(ioaddr
+reg
);
825 "MMIO do not match PIO [%02x] (%02x != %02x)\n",
830 #endif /* USE_MMIO */
832 dev
->base_addr
= (unsigned long)ioaddr
;
835 /* Get chip registers into a sane state */
836 rhine_power_init(dev
);
837 rhine_hw_init(dev
, pioaddr
);
839 for (i
= 0; i
< 6; i
++)
840 dev
->dev_addr
[i
] = ioread8(ioaddr
+ StationAddr
+ i
);
842 if (!is_valid_ether_addr(dev
->dev_addr
)) {
843 /* Report it and use a random ethernet address instead */
844 netdev_err(dev
, "Invalid MAC address: %pM\n", dev
->dev_addr
);
845 random_ether_addr(dev
->dev_addr
);
846 netdev_info(dev
, "Using random MAC address: %pM\n",
849 memcpy(dev
->perm_addr
, dev
->dev_addr
, dev
->addr_len
);
851 /* For Rhine-I/II, phy_id is loaded from EEPROM */
853 phy_id
= ioread8(ioaddr
+ 0x6C);
855 dev
->irq
= pdev
->irq
;
857 spin_lock_init(&rp
->lock
);
858 INIT_WORK(&rp
->reset_task
, rhine_reset_task
);
860 rp
->mii_if
.dev
= dev
;
861 rp
->mii_if
.mdio_read
= mdio_read
;
862 rp
->mii_if
.mdio_write
= mdio_write
;
863 rp
->mii_if
.phy_id_mask
= 0x1f;
864 rp
->mii_if
.reg_num_mask
= 0x1f;
866 /* The chip-specific entries in the device structure. */
867 dev
->netdev_ops
= &rhine_netdev_ops
;
868 dev
->ethtool_ops
= &netdev_ethtool_ops
,
869 dev
->watchdog_timeo
= TX_TIMEOUT
;
871 netif_napi_add(dev
, &rp
->napi
, rhine_napipoll
, 64);
873 if (rp
->quirks
& rqRhineI
)
874 dev
->features
|= NETIF_F_SG
|NETIF_F_HW_CSUM
;
876 if (pdev
->revision
>= VT6105M
)
877 dev
->features
|= NETIF_F_HW_VLAN_TX
| NETIF_F_HW_VLAN_RX
|
878 NETIF_F_HW_VLAN_FILTER
;
880 /* dev->name not defined before register_netdev()! */
881 rc
= register_netdev(dev
);
885 netdev_info(dev
, "VIA %s at 0x%lx, %pM, IRQ %d\n",
892 dev
->dev_addr
, pdev
->irq
);
894 pci_set_drvdata(pdev
, dev
);
898 int mii_status
= mdio_read(dev
, phy_id
, 1);
899 mii_cmd
= mdio_read(dev
, phy_id
, MII_BMCR
) & ~BMCR_ISOLATE
;
900 mdio_write(dev
, phy_id
, MII_BMCR
, mii_cmd
);
901 if (mii_status
!= 0xffff && mii_status
!= 0x0000) {
902 rp
->mii_if
.advertising
= mdio_read(dev
, phy_id
, 4);
904 "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n",
906 mii_status
, rp
->mii_if
.advertising
,
907 mdio_read(dev
, phy_id
, 5));
909 /* set IFF_RUNNING */
910 if (mii_status
& BMSR_LSTATUS
)
911 netif_carrier_on(dev
);
913 netif_carrier_off(dev
);
917 rp
->mii_if
.phy_id
= phy_id
;
918 if (debug
> 1 && avoid_D3
)
919 netdev_info(dev
, "No D3 power state at shutdown\n");
924 pci_iounmap(pdev
, ioaddr
);
926 pci_release_regions(pdev
);
933 static int alloc_ring(struct net_device
* dev
)
935 struct rhine_private
*rp
= netdev_priv(dev
);
939 ring
= pci_alloc_consistent(rp
->pdev
,
940 RX_RING_SIZE
* sizeof(struct rx_desc
) +
941 TX_RING_SIZE
* sizeof(struct tx_desc
),
944 netdev_err(dev
, "Could not allocate DMA memory\n");
947 if (rp
->quirks
& rqRhineI
) {
948 rp
->tx_bufs
= pci_alloc_consistent(rp
->pdev
,
949 PKT_BUF_SZ
* TX_RING_SIZE
,
951 if (rp
->tx_bufs
== NULL
) {
952 pci_free_consistent(rp
->pdev
,
953 RX_RING_SIZE
* sizeof(struct rx_desc
) +
954 TX_RING_SIZE
* sizeof(struct tx_desc
),
961 rp
->tx_ring
= ring
+ RX_RING_SIZE
* sizeof(struct rx_desc
);
962 rp
->rx_ring_dma
= ring_dma
;
963 rp
->tx_ring_dma
= ring_dma
+ RX_RING_SIZE
* sizeof(struct rx_desc
);
968 static void free_ring(struct net_device
* dev
)
970 struct rhine_private
*rp
= netdev_priv(dev
);
972 pci_free_consistent(rp
->pdev
,
973 RX_RING_SIZE
* sizeof(struct rx_desc
) +
974 TX_RING_SIZE
* sizeof(struct tx_desc
),
975 rp
->rx_ring
, rp
->rx_ring_dma
);
979 pci_free_consistent(rp
->pdev
, PKT_BUF_SZ
* TX_RING_SIZE
,
980 rp
->tx_bufs
, rp
->tx_bufs_dma
);
986 static void alloc_rbufs(struct net_device
*dev
)
988 struct rhine_private
*rp
= netdev_priv(dev
);
992 rp
->dirty_rx
= rp
->cur_rx
= 0;
994 rp
->rx_buf_sz
= (dev
->mtu
<= 1500 ? PKT_BUF_SZ
: dev
->mtu
+ 32);
995 rp
->rx_head_desc
= &rp
->rx_ring
[0];
996 next
= rp
->rx_ring_dma
;
998 /* Init the ring entries */
999 for (i
= 0; i
< RX_RING_SIZE
; i
++) {
1000 rp
->rx_ring
[i
].rx_status
= 0;
1001 rp
->rx_ring
[i
].desc_length
= cpu_to_le32(rp
->rx_buf_sz
);
1002 next
+= sizeof(struct rx_desc
);
1003 rp
->rx_ring
[i
].next_desc
= cpu_to_le32(next
);
1004 rp
->rx_skbuff
[i
] = NULL
;
1006 /* Mark the last entry as wrapping the ring. */
1007 rp
->rx_ring
[i
-1].next_desc
= cpu_to_le32(rp
->rx_ring_dma
);
1009 /* Fill in the Rx buffers. Handle allocation failure gracefully. */
1010 for (i
= 0; i
< RX_RING_SIZE
; i
++) {
1011 struct sk_buff
*skb
= netdev_alloc_skb(dev
, rp
->rx_buf_sz
);
1012 rp
->rx_skbuff
[i
] = skb
;
1015 skb
->dev
= dev
; /* Mark as being used by this device. */
1017 rp
->rx_skbuff_dma
[i
] =
1018 pci_map_single(rp
->pdev
, skb
->data
, rp
->rx_buf_sz
,
1019 PCI_DMA_FROMDEVICE
);
1021 rp
->rx_ring
[i
].addr
= cpu_to_le32(rp
->rx_skbuff_dma
[i
]);
1022 rp
->rx_ring
[i
].rx_status
= cpu_to_le32(DescOwn
);
1024 rp
->dirty_rx
= (unsigned int)(i
- RX_RING_SIZE
);
1027 static void free_rbufs(struct net_device
* dev
)
1029 struct rhine_private
*rp
= netdev_priv(dev
);
1032 /* Free all the skbuffs in the Rx queue. */
1033 for (i
= 0; i
< RX_RING_SIZE
; i
++) {
1034 rp
->rx_ring
[i
].rx_status
= 0;
1035 rp
->rx_ring
[i
].addr
= cpu_to_le32(0xBADF00D0); /* An invalid address. */
1036 if (rp
->rx_skbuff
[i
]) {
1037 pci_unmap_single(rp
->pdev
,
1038 rp
->rx_skbuff_dma
[i
],
1039 rp
->rx_buf_sz
, PCI_DMA_FROMDEVICE
);
1040 dev_kfree_skb(rp
->rx_skbuff
[i
]);
1042 rp
->rx_skbuff
[i
] = NULL
;
1046 static void alloc_tbufs(struct net_device
* dev
)
1048 struct rhine_private
*rp
= netdev_priv(dev
);
1052 rp
->dirty_tx
= rp
->cur_tx
= 0;
1053 next
= rp
->tx_ring_dma
;
1054 for (i
= 0; i
< TX_RING_SIZE
; i
++) {
1055 rp
->tx_skbuff
[i
] = NULL
;
1056 rp
->tx_ring
[i
].tx_status
= 0;
1057 rp
->tx_ring
[i
].desc_length
= cpu_to_le32(TXDESC
);
1058 next
+= sizeof(struct tx_desc
);
1059 rp
->tx_ring
[i
].next_desc
= cpu_to_le32(next
);
1060 if (rp
->quirks
& rqRhineI
)
1061 rp
->tx_buf
[i
] = &rp
->tx_bufs
[i
* PKT_BUF_SZ
];
1063 rp
->tx_ring
[i
-1].next_desc
= cpu_to_le32(rp
->tx_ring_dma
);
1067 static void free_tbufs(struct net_device
* dev
)
1069 struct rhine_private
*rp
= netdev_priv(dev
);
1072 for (i
= 0; i
< TX_RING_SIZE
; i
++) {
1073 rp
->tx_ring
[i
].tx_status
= 0;
1074 rp
->tx_ring
[i
].desc_length
= cpu_to_le32(TXDESC
);
1075 rp
->tx_ring
[i
].addr
= cpu_to_le32(0xBADF00D0); /* An invalid address. */
1076 if (rp
->tx_skbuff
[i
]) {
1077 if (rp
->tx_skbuff_dma
[i
]) {
1078 pci_unmap_single(rp
->pdev
,
1079 rp
->tx_skbuff_dma
[i
],
1080 rp
->tx_skbuff
[i
]->len
,
1083 dev_kfree_skb(rp
->tx_skbuff
[i
]);
1085 rp
->tx_skbuff
[i
] = NULL
;
1086 rp
->tx_buf
[i
] = NULL
;
1090 static void rhine_check_media(struct net_device
*dev
, unsigned int init_media
)
1092 struct rhine_private
*rp
= netdev_priv(dev
);
1093 void __iomem
*ioaddr
= rp
->base
;
1095 mii_check_media(&rp
->mii_if
, debug
, init_media
);
1097 if (rp
->mii_if
.full_duplex
)
1098 iowrite8(ioread8(ioaddr
+ ChipCmd1
) | Cmd1FDuplex
,
1101 iowrite8(ioread8(ioaddr
+ ChipCmd1
) & ~Cmd1FDuplex
,
1104 netdev_info(dev
, "force_media %d, carrier %d\n",
1105 rp
->mii_if
.force_media
, netif_carrier_ok(dev
));
1108 /* Called after status of force_media possibly changed */
1109 static void rhine_set_carrier(struct mii_if_info
*mii
)
1111 if (mii
->force_media
) {
1112 /* autoneg is off: Link is always assumed to be up */
1113 if (!netif_carrier_ok(mii
->dev
))
1114 netif_carrier_on(mii
->dev
);
1116 else /* Let MMI library update carrier status */
1117 rhine_check_media(mii
->dev
, 0);
1119 netdev_info(mii
->dev
, "force_media %d, carrier %d\n",
1120 mii
->force_media
, netif_carrier_ok(mii
->dev
));
1124 * rhine_set_cam - set CAM multicast filters
1125 * @ioaddr: register block of this Rhine
1126 * @idx: multicast CAM index [0..MCAM_SIZE-1]
1127 * @addr: multicast address (6 bytes)
1129 * Load addresses into multicast filters.
1131 static void rhine_set_cam(void __iomem
*ioaddr
, int idx
, u8
*addr
)
1135 iowrite8(CAMC_CAMEN
, ioaddr
+ CamCon
);
1138 /* Paranoid -- idx out of range should never happen */
1139 idx
&= (MCAM_SIZE
- 1);
1141 iowrite8((u8
) idx
, ioaddr
+ CamAddr
);
1143 for (i
= 0; i
< 6; i
++, addr
++)
1144 iowrite8(*addr
, ioaddr
+ MulticastFilter0
+ i
);
1148 iowrite8(CAMC_CAMWR
| CAMC_CAMEN
, ioaddr
+ CamCon
);
1151 iowrite8(0, ioaddr
+ CamCon
);
1155 * rhine_set_vlan_cam - set CAM VLAN filters
1156 * @ioaddr: register block of this Rhine
1157 * @idx: VLAN CAM index [0..VCAM_SIZE-1]
1158 * @addr: VLAN ID (2 bytes)
1160 * Load addresses into VLAN filters.
1162 static void rhine_set_vlan_cam(void __iomem
*ioaddr
, int idx
, u8
*addr
)
1164 iowrite8(CAMC_CAMEN
| CAMC_VCAMSL
, ioaddr
+ CamCon
);
1167 /* Paranoid -- idx out of range should never happen */
1168 idx
&= (VCAM_SIZE
- 1);
1170 iowrite8((u8
) idx
, ioaddr
+ CamAddr
);
1172 iowrite16(*((u16
*) addr
), ioaddr
+ MulticastFilter0
+ 6);
1176 iowrite8(CAMC_CAMWR
| CAMC_CAMEN
, ioaddr
+ CamCon
);
1179 iowrite8(0, ioaddr
+ CamCon
);
1183 * rhine_set_cam_mask - set multicast CAM mask
1184 * @ioaddr: register block of this Rhine
1185 * @mask: multicast CAM mask
1187 * Mask sets multicast filters active/inactive.
1189 static void rhine_set_cam_mask(void __iomem
*ioaddr
, u32 mask
)
1191 iowrite8(CAMC_CAMEN
, ioaddr
+ CamCon
);
1195 iowrite32(mask
, ioaddr
+ CamMask
);
1198 iowrite8(0, ioaddr
+ CamCon
);
1202 * rhine_set_vlan_cam_mask - set VLAN CAM mask
1203 * @ioaddr: register block of this Rhine
1204 * @mask: VLAN CAM mask
1206 * Mask sets VLAN filters active/inactive.
1208 static void rhine_set_vlan_cam_mask(void __iomem
*ioaddr
, u32 mask
)
1210 iowrite8(CAMC_CAMEN
| CAMC_VCAMSL
, ioaddr
+ CamCon
);
1214 iowrite32(mask
, ioaddr
+ CamMask
);
1217 iowrite8(0, ioaddr
+ CamCon
);
1221 * rhine_init_cam_filter - initialize CAM filters
1222 * @dev: network device
1224 * Initialize (disable) hardware VLAN and multicast support on this
1227 static void rhine_init_cam_filter(struct net_device
*dev
)
1229 struct rhine_private
*rp
= netdev_priv(dev
);
1230 void __iomem
*ioaddr
= rp
->base
;
1232 /* Disable all CAMs */
1233 rhine_set_vlan_cam_mask(ioaddr
, 0);
1234 rhine_set_cam_mask(ioaddr
, 0);
1236 /* disable hardware VLAN support */
1237 BYTE_REG_BITS_ON(TCR_PQEN
, ioaddr
+ TxConfig
);
1238 BYTE_REG_BITS_OFF(BCR1_VIDFR
, ioaddr
+ PCIBusConfig1
);
1242 * rhine_update_vcam - update VLAN CAM filters
1243 * @rp: rhine_private data of this Rhine
1245 * Update VLAN CAM filters to match configuration change.
1247 static void rhine_update_vcam(struct net_device
*dev
)
1249 struct rhine_private
*rp
= netdev_priv(dev
);
1250 void __iomem
*ioaddr
= rp
->base
;
1252 u32 vCAMmask
= 0; /* 32 vCAMs (6105M and better) */
1255 for_each_set_bit(vid
, rp
->active_vlans
, VLAN_N_VID
) {
1256 rhine_set_vlan_cam(ioaddr
, i
, (u8
*)&vid
);
1258 if (++i
>= VCAM_SIZE
)
1261 rhine_set_vlan_cam_mask(ioaddr
, vCAMmask
);
1264 static void rhine_vlan_rx_add_vid(struct net_device
*dev
, unsigned short vid
)
1266 struct rhine_private
*rp
= netdev_priv(dev
);
1268 spin_lock_irq(&rp
->lock
);
1269 set_bit(vid
, rp
->active_vlans
);
1270 rhine_update_vcam(dev
);
1271 spin_unlock_irq(&rp
->lock
);
1274 static void rhine_vlan_rx_kill_vid(struct net_device
*dev
, unsigned short vid
)
1276 struct rhine_private
*rp
= netdev_priv(dev
);
1278 spin_lock_irq(&rp
->lock
);
1279 clear_bit(vid
, rp
->active_vlans
);
1280 rhine_update_vcam(dev
);
1281 spin_unlock_irq(&rp
->lock
);
1284 static void init_registers(struct net_device
*dev
)
1286 struct rhine_private
*rp
= netdev_priv(dev
);
1287 void __iomem
*ioaddr
= rp
->base
;
1290 for (i
= 0; i
< 6; i
++)
1291 iowrite8(dev
->dev_addr
[i
], ioaddr
+ StationAddr
+ i
);
1293 /* Initialize other registers. */
1294 iowrite16(0x0006, ioaddr
+ PCIBusConfig
); /* Tune configuration??? */
1295 /* Configure initial FIFO thresholds. */
1296 iowrite8(0x20, ioaddr
+ TxConfig
);
1297 rp
->tx_thresh
= 0x20;
1298 rp
->rx_thresh
= 0x60; /* Written in rhine_set_rx_mode(). */
1300 iowrite32(rp
->rx_ring_dma
, ioaddr
+ RxRingPtr
);
1301 iowrite32(rp
->tx_ring_dma
, ioaddr
+ TxRingPtr
);
1303 rhine_set_rx_mode(dev
);
1305 if (rp
->pdev
->revision
>= VT6105M
)
1306 rhine_init_cam_filter(dev
);
1308 napi_enable(&rp
->napi
);
1310 /* Enable interrupts by setting the interrupt mask. */
1311 iowrite16(IntrRxDone
| IntrRxErr
| IntrRxEmpty
| IntrRxOverflow
|
1312 IntrRxDropped
| IntrRxNoBuf
| IntrTxAborted
|
1313 IntrTxDone
| IntrTxError
| IntrTxUnderrun
|
1314 IntrPCIErr
| IntrStatsMax
| IntrLinkChange
,
1315 ioaddr
+ IntrEnable
);
1317 iowrite16(CmdStart
| CmdTxOn
| CmdRxOn
| (Cmd1NoTxPoll
<< 8),
1319 rhine_check_media(dev
, 1);
1322 /* Enable MII link status auto-polling (required for IntrLinkChange) */
1323 static void rhine_enable_linkmon(void __iomem
*ioaddr
)
1325 iowrite8(0, ioaddr
+ MIICmd
);
1326 iowrite8(MII_BMSR
, ioaddr
+ MIIRegAddr
);
1327 iowrite8(0x80, ioaddr
+ MIICmd
);
1329 RHINE_WAIT_FOR((ioread8(ioaddr
+ MIIRegAddr
) & 0x20));
1331 iowrite8(MII_BMSR
| 0x40, ioaddr
+ MIIRegAddr
);
1334 /* Disable MII link status auto-polling (required for MDIO access) */
1335 static void rhine_disable_linkmon(void __iomem
*ioaddr
, u32 quirks
)
1337 iowrite8(0, ioaddr
+ MIICmd
);
1339 if (quirks
& rqRhineI
) {
1340 iowrite8(0x01, ioaddr
+ MIIRegAddr
); // MII_BMSR
1342 /* Can be called from ISR. Evil. */
1345 /* 0x80 must be set immediately before turning it off */
1346 iowrite8(0x80, ioaddr
+ MIICmd
);
1348 RHINE_WAIT_FOR(ioread8(ioaddr
+ MIIRegAddr
) & 0x20);
1350 /* Heh. Now clear 0x80 again. */
1351 iowrite8(0, ioaddr
+ MIICmd
);
1354 RHINE_WAIT_FOR(ioread8(ioaddr
+ MIIRegAddr
) & 0x80);
1357 /* Read and write over the MII Management Data I/O (MDIO) interface. */
1359 static int mdio_read(struct net_device
*dev
, int phy_id
, int regnum
)
1361 struct rhine_private
*rp
= netdev_priv(dev
);
1362 void __iomem
*ioaddr
= rp
->base
;
1365 rhine_disable_linkmon(ioaddr
, rp
->quirks
);
1367 /* rhine_disable_linkmon already cleared MIICmd */
1368 iowrite8(phy_id
, ioaddr
+ MIIPhyAddr
);
1369 iowrite8(regnum
, ioaddr
+ MIIRegAddr
);
1370 iowrite8(0x40, ioaddr
+ MIICmd
); /* Trigger read */
1371 RHINE_WAIT_FOR(!(ioread8(ioaddr
+ MIICmd
) & 0x40));
1372 result
= ioread16(ioaddr
+ MIIData
);
1374 rhine_enable_linkmon(ioaddr
);
1378 static void mdio_write(struct net_device
*dev
, int phy_id
, int regnum
, int value
)
1380 struct rhine_private
*rp
= netdev_priv(dev
);
1381 void __iomem
*ioaddr
= rp
->base
;
1383 rhine_disable_linkmon(ioaddr
, rp
->quirks
);
1385 /* rhine_disable_linkmon already cleared MIICmd */
1386 iowrite8(phy_id
, ioaddr
+ MIIPhyAddr
);
1387 iowrite8(regnum
, ioaddr
+ MIIRegAddr
);
1388 iowrite16(value
, ioaddr
+ MIIData
);
1389 iowrite8(0x20, ioaddr
+ MIICmd
); /* Trigger write */
1390 RHINE_WAIT_FOR(!(ioread8(ioaddr
+ MIICmd
) & 0x20));
1392 rhine_enable_linkmon(ioaddr
);
1395 static int rhine_open(struct net_device
*dev
)
1397 struct rhine_private
*rp
= netdev_priv(dev
);
1398 void __iomem
*ioaddr
= rp
->base
;
1401 rc
= request_irq(rp
->pdev
->irq
, rhine_interrupt
, IRQF_SHARED
, dev
->name
,
1407 netdev_dbg(dev
, "%s() irq %d\n", __func__
, rp
->pdev
->irq
);
1409 rc
= alloc_ring(dev
);
1411 free_irq(rp
->pdev
->irq
, dev
);
1416 rhine_chip_reset(dev
);
1417 init_registers(dev
);
1419 netdev_dbg(dev
, "%s() Done - status %04x MII status: %04x\n",
1420 __func__
, ioread16(ioaddr
+ ChipCmd
),
1421 mdio_read(dev
, rp
->mii_if
.phy_id
, MII_BMSR
));
1423 netif_start_queue(dev
);
1428 static void rhine_reset_task(struct work_struct
*work
)
1430 struct rhine_private
*rp
= container_of(work
, struct rhine_private
,
1432 struct net_device
*dev
= rp
->dev
;
1434 /* protect against concurrent rx interrupts */
1435 disable_irq(rp
->pdev
->irq
);
1437 napi_disable(&rp
->napi
);
1439 spin_lock_bh(&rp
->lock
);
1441 /* clear all descriptors */
1447 /* Reinitialize the hardware. */
1448 rhine_chip_reset(dev
);
1449 init_registers(dev
);
1451 spin_unlock_bh(&rp
->lock
);
1452 enable_irq(rp
->pdev
->irq
);
1454 dev
->trans_start
= jiffies
; /* prevent tx timeout */
1455 dev
->stats
.tx_errors
++;
1456 netif_wake_queue(dev
);
1459 static void rhine_tx_timeout(struct net_device
*dev
)
1461 struct rhine_private
*rp
= netdev_priv(dev
);
1462 void __iomem
*ioaddr
= rp
->base
;
1464 netdev_warn(dev
, "Transmit timed out, status %04x, PHY status %04x, resetting...\n",
1465 ioread16(ioaddr
+ IntrStatus
),
1466 mdio_read(dev
, rp
->mii_if
.phy_id
, MII_BMSR
));
1468 schedule_work(&rp
->reset_task
);
1471 static netdev_tx_t
rhine_start_tx(struct sk_buff
*skb
,
1472 struct net_device
*dev
)
1474 struct rhine_private
*rp
= netdev_priv(dev
);
1475 void __iomem
*ioaddr
= rp
->base
;
1477 unsigned long flags
;
1479 /* Caution: the write order is important here, set the field
1480 with the "ownership" bits last. */
1482 /* Calculate the next Tx descriptor entry. */
1483 entry
= rp
->cur_tx
% TX_RING_SIZE
;
1485 if (skb_padto(skb
, ETH_ZLEN
))
1486 return NETDEV_TX_OK
;
1488 rp
->tx_skbuff
[entry
] = skb
;
1490 if ((rp
->quirks
& rqRhineI
) &&
1491 (((unsigned long)skb
->data
& 3) || skb_shinfo(skb
)->nr_frags
!= 0 || skb
->ip_summed
== CHECKSUM_PARTIAL
)) {
1492 /* Must use alignment buffer. */
1493 if (skb
->len
> PKT_BUF_SZ
) {
1494 /* packet too long, drop it */
1496 rp
->tx_skbuff
[entry
] = NULL
;
1497 dev
->stats
.tx_dropped
++;
1498 return NETDEV_TX_OK
;
1501 /* Padding is not copied and so must be redone. */
1502 skb_copy_and_csum_dev(skb
, rp
->tx_buf
[entry
]);
1503 if (skb
->len
< ETH_ZLEN
)
1504 memset(rp
->tx_buf
[entry
] + skb
->len
, 0,
1505 ETH_ZLEN
- skb
->len
);
1506 rp
->tx_skbuff_dma
[entry
] = 0;
1507 rp
->tx_ring
[entry
].addr
= cpu_to_le32(rp
->tx_bufs_dma
+
1508 (rp
->tx_buf
[entry
] -
1511 rp
->tx_skbuff_dma
[entry
] =
1512 pci_map_single(rp
->pdev
, skb
->data
, skb
->len
,
1514 rp
->tx_ring
[entry
].addr
= cpu_to_le32(rp
->tx_skbuff_dma
[entry
]);
1517 rp
->tx_ring
[entry
].desc_length
=
1518 cpu_to_le32(TXDESC
| (skb
->len
>= ETH_ZLEN
? skb
->len
: ETH_ZLEN
));
1520 if (unlikely(vlan_tx_tag_present(skb
))) {
1521 rp
->tx_ring
[entry
].tx_status
= cpu_to_le32((vlan_tx_tag_get(skb
)) << 16);
1522 /* request tagging */
1523 rp
->tx_ring
[entry
].desc_length
|= cpu_to_le32(0x020000);
1526 rp
->tx_ring
[entry
].tx_status
= 0;
1529 spin_lock_irqsave(&rp
->lock
, flags
);
1531 rp
->tx_ring
[entry
].tx_status
|= cpu_to_le32(DescOwn
);
1536 /* Non-x86 Todo: explicitly flush cache lines here. */
1538 if (vlan_tx_tag_present(skb
))
1539 /* Tx queues are bits 7-0 (first Tx queue: bit 7) */
1540 BYTE_REG_BITS_ON(1 << 7, ioaddr
+ TQWake
);
1542 /* Wake the potentially-idle transmit channel */
1543 iowrite8(ioread8(ioaddr
+ ChipCmd1
) | Cmd1TxDemand
,
1547 if (rp
->cur_tx
== rp
->dirty_tx
+ TX_QUEUE_LEN
)
1548 netif_stop_queue(dev
);
1550 spin_unlock_irqrestore(&rp
->lock
, flags
);
1553 netdev_dbg(dev
, "Transmit frame #%d queued in slot %d\n",
1554 rp
->cur_tx
-1, entry
);
1556 return NETDEV_TX_OK
;
1559 /* The interrupt handler does all of the Rx thread work and cleans up
1560 after the Tx thread. */
1561 static irqreturn_t
rhine_interrupt(int irq
, void *dev_instance
)
1563 struct net_device
*dev
= dev_instance
;
1564 struct rhine_private
*rp
= netdev_priv(dev
);
1565 void __iomem
*ioaddr
= rp
->base
;
1567 int boguscnt
= max_interrupt_work
;
1570 while ((intr_status
= get_intr_status(dev
))) {
1573 /* Acknowledge all of the current interrupt sources ASAP. */
1574 if (intr_status
& IntrTxDescRace
)
1575 iowrite8(0x08, ioaddr
+ IntrStatus2
);
1576 iowrite16(intr_status
& 0xffff, ioaddr
+ IntrStatus
);
1580 netdev_dbg(dev
, "Interrupt, status %08x\n",
1583 if (intr_status
& (IntrRxDone
| IntrRxErr
| IntrRxDropped
|
1584 IntrRxWakeUp
| IntrRxEmpty
| IntrRxNoBuf
)) {
1585 iowrite16(IntrTxAborted
|
1586 IntrTxDone
| IntrTxError
| IntrTxUnderrun
|
1587 IntrPCIErr
| IntrStatsMax
| IntrLinkChange
,
1588 ioaddr
+ IntrEnable
);
1590 napi_schedule(&rp
->napi
);
1593 if (intr_status
& (IntrTxErrSummary
| IntrTxDone
)) {
1594 if (intr_status
& IntrTxErrSummary
) {
1595 /* Avoid scavenging before Tx engine turned off */
1596 RHINE_WAIT_FOR(!(ioread8(ioaddr
+ChipCmd
) & CmdTxOn
));
1598 ioread8(ioaddr
+ChipCmd
) & CmdTxOn
)
1600 "%s: Tx engine still on\n",
1606 /* Abnormal error summary/uncommon events handlers. */
1607 if (intr_status
& (IntrPCIErr
| IntrLinkChange
|
1608 IntrStatsMax
| IntrTxError
| IntrTxAborted
|
1609 IntrTxUnderrun
| IntrTxDescRace
))
1610 rhine_error(dev
, intr_status
);
1612 if (--boguscnt
< 0) {
1613 netdev_warn(dev
, "Too much work at interrupt, status=%#08x\n",
1620 netdev_dbg(dev
, "exiting interrupt, status=%08x\n",
1621 ioread16(ioaddr
+ IntrStatus
));
1622 return IRQ_RETVAL(handled
);
1625 /* This routine is logically part of the interrupt handler, but isolated
1627 static void rhine_tx(struct net_device
*dev
)
1629 struct rhine_private
*rp
= netdev_priv(dev
);
1630 int txstatus
= 0, entry
= rp
->dirty_tx
% TX_RING_SIZE
;
1632 spin_lock(&rp
->lock
);
1634 /* find and cleanup dirty tx descriptors */
1635 while (rp
->dirty_tx
!= rp
->cur_tx
) {
1636 txstatus
= le32_to_cpu(rp
->tx_ring
[entry
].tx_status
);
1638 netdev_dbg(dev
, "Tx scavenge %d status %08x\n",
1640 if (txstatus
& DescOwn
)
1642 if (txstatus
& 0x8000) {
1644 netdev_dbg(dev
, "Transmit error, Tx status %08x\n",
1646 dev
->stats
.tx_errors
++;
1647 if (txstatus
& 0x0400)
1648 dev
->stats
.tx_carrier_errors
++;
1649 if (txstatus
& 0x0200)
1650 dev
->stats
.tx_window_errors
++;
1651 if (txstatus
& 0x0100)
1652 dev
->stats
.tx_aborted_errors
++;
1653 if (txstatus
& 0x0080)
1654 dev
->stats
.tx_heartbeat_errors
++;
1655 if (((rp
->quirks
& rqRhineI
) && txstatus
& 0x0002) ||
1656 (txstatus
& 0x0800) || (txstatus
& 0x1000)) {
1657 dev
->stats
.tx_fifo_errors
++;
1658 rp
->tx_ring
[entry
].tx_status
= cpu_to_le32(DescOwn
);
1659 break; /* Keep the skb - we try again */
1661 /* Transmitter restarted in 'abnormal' handler. */
1663 if (rp
->quirks
& rqRhineI
)
1664 dev
->stats
.collisions
+= (txstatus
>> 3) & 0x0F;
1666 dev
->stats
.collisions
+= txstatus
& 0x0F;
1668 netdev_dbg(dev
, "collisions: %1.1x:%1.1x\n",
1669 (txstatus
>> 3) & 0xF,
1671 dev
->stats
.tx_bytes
+= rp
->tx_skbuff
[entry
]->len
;
1672 dev
->stats
.tx_packets
++;
1674 /* Free the original skb. */
1675 if (rp
->tx_skbuff_dma
[entry
]) {
1676 pci_unmap_single(rp
->pdev
,
1677 rp
->tx_skbuff_dma
[entry
],
1678 rp
->tx_skbuff
[entry
]->len
,
1681 dev_kfree_skb_irq(rp
->tx_skbuff
[entry
]);
1682 rp
->tx_skbuff
[entry
] = NULL
;
1683 entry
= (++rp
->dirty_tx
) % TX_RING_SIZE
;
1685 if ((rp
->cur_tx
- rp
->dirty_tx
) < TX_QUEUE_LEN
- 4)
1686 netif_wake_queue(dev
);
1688 spin_unlock(&rp
->lock
);
1692 * rhine_get_vlan_tci - extract TCI from Rx data buffer
1693 * @skb: pointer to sk_buff
1694 * @data_size: used data area of the buffer including CRC
1696 * If hardware VLAN tag extraction is enabled and the chip indicates a 802.1Q
1697 * packet, the extracted 802.1Q header (2 bytes TPID + 2 bytes TCI) is 4-byte
1698 * aligned following the CRC.
1700 static inline u16
rhine_get_vlan_tci(struct sk_buff
*skb
, int data_size
)
1702 u8
*trailer
= (u8
*)skb
->data
+ ((data_size
+ 3) & ~3) + 2;
1703 return be16_to_cpup((__be16
*)trailer
);
1706 /* Process up to limit frames from receive ring */
1707 static int rhine_rx(struct net_device
*dev
, int limit
)
1709 struct rhine_private
*rp
= netdev_priv(dev
);
1711 int entry
= rp
->cur_rx
% RX_RING_SIZE
;
1714 netdev_dbg(dev
, "%s(), entry %d status %08x\n",
1716 le32_to_cpu(rp
->rx_head_desc
->rx_status
));
1719 /* If EOP is set on the next entry, it's a new packet. Send it up. */
1720 for (count
= 0; count
< limit
; ++count
) {
1721 struct rx_desc
*desc
= rp
->rx_head_desc
;
1722 u32 desc_status
= le32_to_cpu(desc
->rx_status
);
1723 u32 desc_length
= le32_to_cpu(desc
->desc_length
);
1724 int data_size
= desc_status
>> 16;
1726 if (desc_status
& DescOwn
)
1730 netdev_dbg(dev
, "%s() status is %08x\n",
1731 __func__
, desc_status
);
1733 if ((desc_status
& (RxWholePkt
| RxErr
)) != RxWholePkt
) {
1734 if ((desc_status
& RxWholePkt
) != RxWholePkt
) {
1736 "Oversized Ethernet frame spanned multiple buffers, "
1737 "entry %#x length %d status %08x!\n",
1741 "Oversized Ethernet frame %p vs %p\n",
1743 &rp
->rx_ring
[entry
]);
1744 dev
->stats
.rx_length_errors
++;
1745 } else if (desc_status
& RxErr
) {
1746 /* There was a error. */
1748 netdev_dbg(dev
, "%s() Rx error was %08x\n",
1749 __func__
, desc_status
);
1750 dev
->stats
.rx_errors
++;
1751 if (desc_status
& 0x0030)
1752 dev
->stats
.rx_length_errors
++;
1753 if (desc_status
& 0x0048)
1754 dev
->stats
.rx_fifo_errors
++;
1755 if (desc_status
& 0x0004)
1756 dev
->stats
.rx_frame_errors
++;
1757 if (desc_status
& 0x0002) {
1758 /* this can also be updated outside the interrupt handler */
1759 spin_lock(&rp
->lock
);
1760 dev
->stats
.rx_crc_errors
++;
1761 spin_unlock(&rp
->lock
);
1765 struct sk_buff
*skb
= NULL
;
1766 /* Length should omit the CRC */
1767 int pkt_len
= data_size
- 4;
1770 /* Check if the packet is long enough to accept without
1771 copying to a minimally-sized skbuff. */
1772 if (pkt_len
< rx_copybreak
)
1773 skb
= netdev_alloc_skb_ip_align(dev
, pkt_len
);
1775 pci_dma_sync_single_for_cpu(rp
->pdev
,
1776 rp
->rx_skbuff_dma
[entry
],
1778 PCI_DMA_FROMDEVICE
);
1780 skb_copy_to_linear_data(skb
,
1781 rp
->rx_skbuff
[entry
]->data
,
1783 skb_put(skb
, pkt_len
);
1784 pci_dma_sync_single_for_device(rp
->pdev
,
1785 rp
->rx_skbuff_dma
[entry
],
1787 PCI_DMA_FROMDEVICE
);
1789 skb
= rp
->rx_skbuff
[entry
];
1791 netdev_err(dev
, "Inconsistent Rx descriptor chain\n");
1794 rp
->rx_skbuff
[entry
] = NULL
;
1795 skb_put(skb
, pkt_len
);
1796 pci_unmap_single(rp
->pdev
,
1797 rp
->rx_skbuff_dma
[entry
],
1799 PCI_DMA_FROMDEVICE
);
1802 if (unlikely(desc_length
& DescTag
))
1803 vlan_tci
= rhine_get_vlan_tci(skb
, data_size
);
1805 skb
->protocol
= eth_type_trans(skb
, dev
);
1807 if (unlikely(desc_length
& DescTag
))
1808 __vlan_hwaccel_put_tag(skb
, vlan_tci
);
1809 netif_receive_skb(skb
);
1810 dev
->stats
.rx_bytes
+= pkt_len
;
1811 dev
->stats
.rx_packets
++;
1813 entry
= (++rp
->cur_rx
) % RX_RING_SIZE
;
1814 rp
->rx_head_desc
= &rp
->rx_ring
[entry
];
1817 /* Refill the Rx ring buffers. */
1818 for (; rp
->cur_rx
- rp
->dirty_rx
> 0; rp
->dirty_rx
++) {
1819 struct sk_buff
*skb
;
1820 entry
= rp
->dirty_rx
% RX_RING_SIZE
;
1821 if (rp
->rx_skbuff
[entry
] == NULL
) {
1822 skb
= netdev_alloc_skb(dev
, rp
->rx_buf_sz
);
1823 rp
->rx_skbuff
[entry
] = skb
;
1825 break; /* Better luck next round. */
1826 skb
->dev
= dev
; /* Mark as being used by this device. */
1827 rp
->rx_skbuff_dma
[entry
] =
1828 pci_map_single(rp
->pdev
, skb
->data
,
1830 PCI_DMA_FROMDEVICE
);
1831 rp
->rx_ring
[entry
].addr
= cpu_to_le32(rp
->rx_skbuff_dma
[entry
]);
1833 rp
->rx_ring
[entry
].rx_status
= cpu_to_le32(DescOwn
);
1840 * Clears the "tally counters" for CRC errors and missed frames(?).
1841 * It has been reported that some chips need a write of 0 to clear
1842 * these, for others the counters are set to 1 when written to and
1843 * instead cleared when read. So we clear them both ways ...
1845 static inline void clear_tally_counters(void __iomem
*ioaddr
)
1847 iowrite32(0, ioaddr
+ RxMissed
);
1848 ioread16(ioaddr
+ RxCRCErrs
);
1849 ioread16(ioaddr
+ RxMissed
);
1852 static void rhine_restart_tx(struct net_device
*dev
) {
1853 struct rhine_private
*rp
= netdev_priv(dev
);
1854 void __iomem
*ioaddr
= rp
->base
;
1855 int entry
= rp
->dirty_tx
% TX_RING_SIZE
;
1859 * If new errors occurred, we need to sort them out before doing Tx.
1860 * In that case the ISR will be back here RSN anyway.
1862 intr_status
= get_intr_status(dev
);
1864 if ((intr_status
& IntrTxErrSummary
) == 0) {
1866 /* We know better than the chip where it should continue. */
1867 iowrite32(rp
->tx_ring_dma
+ entry
* sizeof(struct tx_desc
),
1868 ioaddr
+ TxRingPtr
);
1870 iowrite8(ioread8(ioaddr
+ ChipCmd
) | CmdTxOn
,
1873 if (rp
->tx_ring
[entry
].desc_length
& cpu_to_le32(0x020000))
1874 /* Tx queues are bits 7-0 (first Tx queue: bit 7) */
1875 BYTE_REG_BITS_ON(1 << 7, ioaddr
+ TQWake
);
1877 iowrite8(ioread8(ioaddr
+ ChipCmd1
) | Cmd1TxDemand
,
1882 /* This should never happen */
1884 netdev_warn(dev
, "%s() Another error occurred %08x\n",
1885 __func__
, intr_status
);
1890 static void rhine_error(struct net_device
*dev
, int intr_status
)
1892 struct rhine_private
*rp
= netdev_priv(dev
);
1893 void __iomem
*ioaddr
= rp
->base
;
1895 spin_lock(&rp
->lock
);
1897 if (intr_status
& IntrLinkChange
)
1898 rhine_check_media(dev
, 0);
1899 if (intr_status
& IntrStatsMax
) {
1900 dev
->stats
.rx_crc_errors
+= ioread16(ioaddr
+ RxCRCErrs
);
1901 dev
->stats
.rx_missed_errors
+= ioread16(ioaddr
+ RxMissed
);
1902 clear_tally_counters(ioaddr
);
1904 if (intr_status
& IntrTxAborted
) {
1906 netdev_info(dev
, "Abort %08x, frame dropped\n",
1909 if (intr_status
& IntrTxUnderrun
) {
1910 if (rp
->tx_thresh
< 0xE0)
1911 BYTE_REG_BITS_SET((rp
->tx_thresh
+= 0x20), 0x80, ioaddr
+ TxConfig
);
1913 netdev_info(dev
, "Transmitter underrun, Tx threshold now %02x\n",
1916 if (intr_status
& IntrTxDescRace
) {
1918 netdev_info(dev
, "Tx descriptor write-back race\n");
1920 if ((intr_status
& IntrTxError
) &&
1921 (intr_status
& (IntrTxAborted
|
1922 IntrTxUnderrun
| IntrTxDescRace
)) == 0) {
1923 if (rp
->tx_thresh
< 0xE0) {
1924 BYTE_REG_BITS_SET((rp
->tx_thresh
+= 0x20), 0x80, ioaddr
+ TxConfig
);
1927 netdev_info(dev
, "Unspecified error. Tx threshold now %02x\n",
1930 if (intr_status
& (IntrTxAborted
| IntrTxUnderrun
| IntrTxDescRace
|
1932 rhine_restart_tx(dev
);
1934 if (intr_status
& ~(IntrLinkChange
| IntrStatsMax
| IntrTxUnderrun
|
1935 IntrTxError
| IntrTxAborted
| IntrNormalSummary
|
1938 netdev_err(dev
, "Something Wicked happened! %08x\n",
1942 spin_unlock(&rp
->lock
);
1945 static struct net_device_stats
*rhine_get_stats(struct net_device
*dev
)
1947 struct rhine_private
*rp
= netdev_priv(dev
);
1948 void __iomem
*ioaddr
= rp
->base
;
1949 unsigned long flags
;
1951 spin_lock_irqsave(&rp
->lock
, flags
);
1952 dev
->stats
.rx_crc_errors
+= ioread16(ioaddr
+ RxCRCErrs
);
1953 dev
->stats
.rx_missed_errors
+= ioread16(ioaddr
+ RxMissed
);
1954 clear_tally_counters(ioaddr
);
1955 spin_unlock_irqrestore(&rp
->lock
, flags
);
1960 static void rhine_set_rx_mode(struct net_device
*dev
)
1962 struct rhine_private
*rp
= netdev_priv(dev
);
1963 void __iomem
*ioaddr
= rp
->base
;
1964 u32 mc_filter
[2]; /* Multicast hash filter */
1965 u8 rx_mode
= 0x0C; /* Note: 0x02=accept runt, 0x01=accept errs */
1966 struct netdev_hw_addr
*ha
;
1968 if (dev
->flags
& IFF_PROMISC
) { /* Set promiscuous. */
1970 iowrite32(0xffffffff, ioaddr
+ MulticastFilter0
);
1971 iowrite32(0xffffffff, ioaddr
+ MulticastFilter1
);
1972 } else if ((netdev_mc_count(dev
) > multicast_filter_limit
) ||
1973 (dev
->flags
& IFF_ALLMULTI
)) {
1974 /* Too many to match, or accept all multicasts. */
1975 iowrite32(0xffffffff, ioaddr
+ MulticastFilter0
);
1976 iowrite32(0xffffffff, ioaddr
+ MulticastFilter1
);
1977 } else if (rp
->pdev
->revision
>= VT6105M
) {
1979 u32 mCAMmask
= 0; /* 32 mCAMs (6105M and better) */
1980 netdev_for_each_mc_addr(ha
, dev
) {
1983 rhine_set_cam(ioaddr
, i
, ha
->addr
);
1987 rhine_set_cam_mask(ioaddr
, mCAMmask
);
1989 memset(mc_filter
, 0, sizeof(mc_filter
));
1990 netdev_for_each_mc_addr(ha
, dev
) {
1991 int bit_nr
= ether_crc(ETH_ALEN
, ha
->addr
) >> 26;
1993 mc_filter
[bit_nr
>> 5] |= 1 << (bit_nr
& 31);
1995 iowrite32(mc_filter
[0], ioaddr
+ MulticastFilter0
);
1996 iowrite32(mc_filter
[1], ioaddr
+ MulticastFilter1
);
1998 /* enable/disable VLAN receive filtering */
1999 if (rp
->pdev
->revision
>= VT6105M
) {
2000 if (dev
->flags
& IFF_PROMISC
)
2001 BYTE_REG_BITS_OFF(BCR1_VIDFR
, ioaddr
+ PCIBusConfig1
);
2003 BYTE_REG_BITS_ON(BCR1_VIDFR
, ioaddr
+ PCIBusConfig1
);
2005 BYTE_REG_BITS_ON(rx_mode
, ioaddr
+ RxConfig
);
2008 static void netdev_get_drvinfo(struct net_device
*dev
, struct ethtool_drvinfo
*info
)
2010 struct rhine_private
*rp
= netdev_priv(dev
);
2012 strcpy(info
->driver
, DRV_NAME
);
2013 strcpy(info
->version
, DRV_VERSION
);
2014 strcpy(info
->bus_info
, pci_name(rp
->pdev
));
2017 static int netdev_get_settings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
2019 struct rhine_private
*rp
= netdev_priv(dev
);
2022 spin_lock_irq(&rp
->lock
);
2023 rc
= mii_ethtool_gset(&rp
->mii_if
, cmd
);
2024 spin_unlock_irq(&rp
->lock
);
2029 static int netdev_set_settings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
2031 struct rhine_private
*rp
= netdev_priv(dev
);
2034 spin_lock_irq(&rp
->lock
);
2035 rc
= mii_ethtool_sset(&rp
->mii_if
, cmd
);
2036 spin_unlock_irq(&rp
->lock
);
2037 rhine_set_carrier(&rp
->mii_if
);
2042 static int netdev_nway_reset(struct net_device
*dev
)
2044 struct rhine_private
*rp
= netdev_priv(dev
);
2046 return mii_nway_restart(&rp
->mii_if
);
2049 static u32
netdev_get_link(struct net_device
*dev
)
2051 struct rhine_private
*rp
= netdev_priv(dev
);
2053 return mii_link_ok(&rp
->mii_if
);
2056 static u32
netdev_get_msglevel(struct net_device
*dev
)
2061 static void netdev_set_msglevel(struct net_device
*dev
, u32 value
)
2066 static void rhine_get_wol(struct net_device
*dev
, struct ethtool_wolinfo
*wol
)
2068 struct rhine_private
*rp
= netdev_priv(dev
);
2070 if (!(rp
->quirks
& rqWOL
))
2073 spin_lock_irq(&rp
->lock
);
2074 wol
->supported
= WAKE_PHY
| WAKE_MAGIC
|
2075 WAKE_UCAST
| WAKE_MCAST
| WAKE_BCAST
; /* Untested */
2076 wol
->wolopts
= rp
->wolopts
;
2077 spin_unlock_irq(&rp
->lock
);
2080 static int rhine_set_wol(struct net_device
*dev
, struct ethtool_wolinfo
*wol
)
2082 struct rhine_private
*rp
= netdev_priv(dev
);
2083 u32 support
= WAKE_PHY
| WAKE_MAGIC
|
2084 WAKE_UCAST
| WAKE_MCAST
| WAKE_BCAST
; /* Untested */
2086 if (!(rp
->quirks
& rqWOL
))
2089 if (wol
->wolopts
& ~support
)
2092 spin_lock_irq(&rp
->lock
);
2093 rp
->wolopts
= wol
->wolopts
;
2094 spin_unlock_irq(&rp
->lock
);
2099 static const struct ethtool_ops netdev_ethtool_ops
= {
2100 .get_drvinfo
= netdev_get_drvinfo
,
2101 .get_settings
= netdev_get_settings
,
2102 .set_settings
= netdev_set_settings
,
2103 .nway_reset
= netdev_nway_reset
,
2104 .get_link
= netdev_get_link
,
2105 .get_msglevel
= netdev_get_msglevel
,
2106 .set_msglevel
= netdev_set_msglevel
,
2107 .get_wol
= rhine_get_wol
,
2108 .set_wol
= rhine_set_wol
,
2111 static int netdev_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
)
2113 struct rhine_private
*rp
= netdev_priv(dev
);
2116 if (!netif_running(dev
))
2119 spin_lock_irq(&rp
->lock
);
2120 rc
= generic_mii_ioctl(&rp
->mii_if
, if_mii(rq
), cmd
, NULL
);
2121 spin_unlock_irq(&rp
->lock
);
2122 rhine_set_carrier(&rp
->mii_if
);
2127 static int rhine_close(struct net_device
*dev
)
2129 struct rhine_private
*rp
= netdev_priv(dev
);
2130 void __iomem
*ioaddr
= rp
->base
;
2132 napi_disable(&rp
->napi
);
2133 cancel_work_sync(&rp
->reset_task
);
2134 netif_stop_queue(dev
);
2136 spin_lock_irq(&rp
->lock
);
2139 netdev_dbg(dev
, "Shutting down ethercard, status was %04x\n",
2140 ioread16(ioaddr
+ ChipCmd
));
2142 /* Switch to loopback mode to avoid hardware races. */
2143 iowrite8(rp
->tx_thresh
| 0x02, ioaddr
+ TxConfig
);
2145 /* Disable interrupts by clearing the interrupt mask. */
2146 iowrite16(0x0000, ioaddr
+ IntrEnable
);
2148 /* Stop the chip's Tx and Rx processes. */
2149 iowrite16(CmdStop
, ioaddr
+ ChipCmd
);
2151 spin_unlock_irq(&rp
->lock
);
2153 free_irq(rp
->pdev
->irq
, dev
);
2162 static void __devexit
rhine_remove_one(struct pci_dev
*pdev
)
2164 struct net_device
*dev
= pci_get_drvdata(pdev
);
2165 struct rhine_private
*rp
= netdev_priv(dev
);
2167 unregister_netdev(dev
);
2169 pci_iounmap(pdev
, rp
->base
);
2170 pci_release_regions(pdev
);
2173 pci_disable_device(pdev
);
2174 pci_set_drvdata(pdev
, NULL
);
2177 static void rhine_shutdown (struct pci_dev
*pdev
)
2179 struct net_device
*dev
= pci_get_drvdata(pdev
);
2180 struct rhine_private
*rp
= netdev_priv(dev
);
2181 void __iomem
*ioaddr
= rp
->base
;
2183 if (!(rp
->quirks
& rqWOL
))
2184 return; /* Nothing to do for non-WOL adapters */
2186 rhine_power_init(dev
);
2188 /* Make sure we use pattern 0, 1 and not 4, 5 */
2189 if (rp
->quirks
& rq6patterns
)
2190 iowrite8(0x04, ioaddr
+ WOLcgClr
);
2192 if (rp
->wolopts
& WAKE_MAGIC
) {
2193 iowrite8(WOLmagic
, ioaddr
+ WOLcrSet
);
2195 * Turn EEPROM-controlled wake-up back on -- some hardware may
2196 * not cooperate otherwise.
2198 iowrite8(ioread8(ioaddr
+ ConfigA
) | 0x03, ioaddr
+ ConfigA
);
2201 if (rp
->wolopts
& (WAKE_BCAST
|WAKE_MCAST
))
2202 iowrite8(WOLbmcast
, ioaddr
+ WOLcgSet
);
2204 if (rp
->wolopts
& WAKE_PHY
)
2205 iowrite8(WOLlnkon
| WOLlnkoff
, ioaddr
+ WOLcrSet
);
2207 if (rp
->wolopts
& WAKE_UCAST
)
2208 iowrite8(WOLucast
, ioaddr
+ WOLcrSet
);
2211 /* Enable legacy WOL (for old motherboards) */
2212 iowrite8(0x01, ioaddr
+ PwcfgSet
);
2213 iowrite8(ioread8(ioaddr
+ StickyHW
) | 0x04, ioaddr
+ StickyHW
);
2216 /* Hit power state D3 (sleep) */
2218 iowrite8(ioread8(ioaddr
+ StickyHW
) | 0x03, ioaddr
+ StickyHW
);
2220 /* TODO: Check use of pci_enable_wake() */
2225 static int rhine_suspend(struct pci_dev
*pdev
, pm_message_t state
)
2227 struct net_device
*dev
= pci_get_drvdata(pdev
);
2228 struct rhine_private
*rp
= netdev_priv(dev
);
2229 unsigned long flags
;
2231 if (!netif_running(dev
))
2234 napi_disable(&rp
->napi
);
2236 netif_device_detach(dev
);
2237 pci_save_state(pdev
);
2239 spin_lock_irqsave(&rp
->lock
, flags
);
2240 rhine_shutdown(pdev
);
2241 spin_unlock_irqrestore(&rp
->lock
, flags
);
2243 free_irq(dev
->irq
, dev
);
2247 static int rhine_resume(struct pci_dev
*pdev
)
2249 struct net_device
*dev
= pci_get_drvdata(pdev
);
2250 struct rhine_private
*rp
= netdev_priv(dev
);
2251 unsigned long flags
;
2254 if (!netif_running(dev
))
2257 if (request_irq(dev
->irq
, rhine_interrupt
, IRQF_SHARED
, dev
->name
, dev
))
2258 netdev_err(dev
, "request_irq failed\n");
2260 ret
= pci_set_power_state(pdev
, PCI_D0
);
2262 netdev_info(dev
, "Entering power state D0 %s (%d)\n",
2263 ret
? "failed" : "succeeded", ret
);
2265 pci_restore_state(pdev
);
2267 spin_lock_irqsave(&rp
->lock
, flags
);
2269 enable_mmio(rp
->pioaddr
, rp
->quirks
);
2271 rhine_power_init(dev
);
2276 init_registers(dev
);
2277 spin_unlock_irqrestore(&rp
->lock
, flags
);
2279 netif_device_attach(dev
);
2283 #endif /* CONFIG_PM */
2285 static struct pci_driver rhine_driver
= {
2287 .id_table
= rhine_pci_tbl
,
2288 .probe
= rhine_init_one
,
2289 .remove
= __devexit_p(rhine_remove_one
),
2291 .suspend
= rhine_suspend
,
2292 .resume
= rhine_resume
,
2293 #endif /* CONFIG_PM */
2294 .shutdown
= rhine_shutdown
,
2297 static struct dmi_system_id __initdata rhine_dmi_table
[] = {
2301 DMI_MATCH(DMI_BIOS_VENDOR
, "Award Software International, Inc."),
2302 DMI_MATCH(DMI_BIOS_VERSION
, "6.00 PG"),
2308 DMI_MATCH(DMI_BIOS_VENDOR
, "Phoenix Technologies, LTD"),
2309 DMI_MATCH(DMI_BIOS_VERSION
, "6.00 PG"),
2315 static int __init
rhine_init(void)
2317 /* when a module, this is printed whether or not devices are found in probe */
2319 pr_info("%s\n", version
);
2321 if (dmi_check_system(rhine_dmi_table
)) {
2322 /* these BIOSes fail at PXE boot if chip is in D3 */
2324 pr_warn("Broken BIOS detected, avoid_D3 enabled\n");
2327 pr_info("avoid_D3 set\n");
2329 return pci_register_driver(&rhine_driver
);
2333 static void __exit
rhine_cleanup(void)
2335 pci_unregister_driver(&rhine_driver
);
2339 module_init(rhine_init
);
2340 module_exit(rhine_cleanup
);