1 /* generic HDLC line discipline for Linux
3 * Written by Paul Fulghum paulkf@microgate.com
4 * for Microgate Corporation
6 * Microgate and SyncLink are registered trademarks of Microgate Corporation
8 * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9 * Al Longyear <longyear@netcom.com>,
10 * Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
12 * Original release 01/11/99
14 * This code is released under the GNU General Public License (GPL)
16 * This module implements the tty line discipline N_HDLC for use with
17 * tty device drivers that support bit-synchronous HDLC communications.
19 * All HDLC data is frame oriented which means:
21 * 1. tty write calls represent one complete transmit frame of data
22 * The device driver should accept the complete frame or none of
23 * the frame (busy) in the write method. Each write call should have
24 * a byte count in the range of 2-65535 bytes (2 is min HDLC frame
25 * with 1 addr byte and 1 ctrl byte). The max byte count of 65535
26 * should include any crc bytes required. For example, when using
27 * CCITT CRC32, 4 crc bytes are required, so the maximum size frame
28 * the application may transmit is limited to 65531 bytes. For CCITT
29 * CRC16, the maximum application frame size would be 65533.
32 * 2. receive callbacks from the device driver represents
33 * one received frame. The device driver should bypass
34 * the tty flip buffer and call the line discipline receive
35 * callback directly to avoid fragmenting or concatenating
36 * multiple frames into a single receive callback.
38 * The HDLC line discipline queues the receive frames in separate
39 * buffers so complete receive frames can be returned by the
42 * 3. tty read calls returns an entire frame of data or nothing.
44 * 4. all send and receive data is considered raw. No processing
45 * or translation is performed by the line discipline, regardless
48 * 5. When line discipline is queried for the amount of receive
49 * data available (FIOC), 0 is returned if no data available,
50 * otherwise the count of the next available frame is returned.
51 * (instead of the sum of all received frame counts).
53 * These conventions allow the standard tty programming interface
54 * to be used for synchronous HDLC applications when used with
55 * this line discipline (or another line discipline that is frame
56 * oriented such as N_PPP).
58 * The SyncLink driver (synclink.c) implements both asynchronous
59 * (using standard line discipline N_TTY) and synchronous HDLC
60 * (using N_HDLC) communications, with the latter using the above
63 * This implementation is very basic and does not maintain
64 * any statistics. The main point is to enforce the raw data
65 * and frame orientation of HDLC communications.
67 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
68 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
69 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
70 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
71 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
72 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
73 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
74 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
75 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
76 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
77 * OF THE POSSIBILITY OF SUCH DAMAGE.
80 #define HDLC_MAGIC 0x239e
82 #include <linux/module.h>
83 #include <linux/init.h>
84 #include <linux/kernel.h>
85 #include <linux/sched.h>
86 #include <linux/types.h>
87 #include <linux/fcntl.h>
88 #include <linux/interrupt.h>
89 #include <linux/ptrace.h>
92 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
94 #include <linux/poll.h>
96 #include <linux/ioctl.h>
97 #include <linux/slab.h>
98 #include <linux/tty.h>
99 #include <linux/errno.h>
100 #include <linux/string.h> /* used in new tty drivers */
101 #include <linux/signal.h> /* used in new tty drivers */
102 #include <linux/if.h>
103 #include <linux/bitops.h>
105 #include <asm/termios.h>
106 #include <asm/uaccess.h>
109 * Buffers for individual HDLC frames
111 #define MAX_HDLC_FRAME_SIZE 65535
112 #define DEFAULT_RX_BUF_COUNT 10
113 #define MAX_RX_BUF_COUNT 60
114 #define DEFAULT_TX_BUF_COUNT 3
117 struct n_hdlc_buf
*link
;
122 #define N_HDLC_BUF_SIZE (sizeof(struct n_hdlc_buf) + maxframe)
124 struct n_hdlc_buf_list
{
125 struct n_hdlc_buf
*head
;
126 struct n_hdlc_buf
*tail
;
132 * struct n_hdlc - per device instance data structure
133 * @magic - magic value for structure
134 * @flags - miscellaneous control flags
135 * @tty - ptr to TTY structure
136 * @backup_tty - TTY to use if tty gets closed
137 * @tbusy - reentrancy flag for tx wakeup code
138 * @woke_up - FIXME: describe this field
139 * @tbuf - currently transmitting tx buffer
140 * @tx_buf_list - list of pending transmit frame buffers
141 * @rx_buf_list - list of received frame buffers
142 * @tx_free_buf_list - list unused transmit frame buffers
143 * @rx_free_buf_list - list unused received frame buffers
148 struct tty_struct
*tty
;
149 struct tty_struct
*backup_tty
;
152 struct n_hdlc_buf
*tbuf
;
153 struct n_hdlc_buf_list tx_buf_list
;
154 struct n_hdlc_buf_list rx_buf_list
;
155 struct n_hdlc_buf_list tx_free_buf_list
;
156 struct n_hdlc_buf_list rx_free_buf_list
;
160 * HDLC buffer list manipulation functions
162 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list
*list
);
163 static void n_hdlc_buf_put(struct n_hdlc_buf_list
*list
,
164 struct n_hdlc_buf
*buf
);
165 static struct n_hdlc_buf
*n_hdlc_buf_get(struct n_hdlc_buf_list
*list
);
167 /* Local functions */
169 static struct n_hdlc
*n_hdlc_alloc (void);
171 /* debug level can be set by insmod for debugging purposes */
172 #define DEBUG_LEVEL_INFO 1
173 static int debuglevel
;
175 /* max frame size for memory allocations */
176 static int maxframe
= 4096;
180 static ssize_t
n_hdlc_tty_read(struct tty_struct
*tty
, struct file
*file
,
181 __u8 __user
*buf
, size_t nr
);
182 static ssize_t
n_hdlc_tty_write(struct tty_struct
*tty
, struct file
*file
,
183 const unsigned char *buf
, size_t nr
);
184 static int n_hdlc_tty_ioctl(struct tty_struct
*tty
, struct file
*file
,
185 unsigned int cmd
, unsigned long arg
);
186 static unsigned int n_hdlc_tty_poll(struct tty_struct
*tty
, struct file
*filp
,
188 static int n_hdlc_tty_open(struct tty_struct
*tty
);
189 static void n_hdlc_tty_close(struct tty_struct
*tty
);
190 static void n_hdlc_tty_receive(struct tty_struct
*tty
, const __u8
*cp
,
191 char *fp
, int count
);
192 static void n_hdlc_tty_wakeup(struct tty_struct
*tty
);
194 #define bset(p,b) ((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
196 #define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data))
197 #define n_hdlc2tty(n_hdlc) ((n_hdlc)->tty)
199 static void flush_rx_queue(struct tty_struct
*tty
)
201 struct n_hdlc
*n_hdlc
= tty2n_hdlc(tty
);
202 struct n_hdlc_buf
*buf
;
204 while ((buf
= n_hdlc_buf_get(&n_hdlc
->rx_buf_list
)))
205 n_hdlc_buf_put(&n_hdlc
->rx_free_buf_list
, buf
);
208 static void flush_tx_queue(struct tty_struct
*tty
)
210 struct n_hdlc
*n_hdlc
= tty2n_hdlc(tty
);
211 struct n_hdlc_buf
*buf
;
214 while ((buf
= n_hdlc_buf_get(&n_hdlc
->tx_buf_list
)))
215 n_hdlc_buf_put(&n_hdlc
->tx_free_buf_list
, buf
);
216 spin_lock_irqsave(&n_hdlc
->tx_buf_list
.spinlock
, flags
);
218 n_hdlc_buf_put(&n_hdlc
->tx_free_buf_list
, n_hdlc
->tbuf
);
221 spin_unlock_irqrestore(&n_hdlc
->tx_buf_list
.spinlock
, flags
);
224 static struct tty_ldisc_ops n_hdlc_ldisc
= {
225 .owner
= THIS_MODULE
,
226 .magic
= TTY_LDISC_MAGIC
,
228 .open
= n_hdlc_tty_open
,
229 .close
= n_hdlc_tty_close
,
230 .read
= n_hdlc_tty_read
,
231 .write
= n_hdlc_tty_write
,
232 .ioctl
= n_hdlc_tty_ioctl
,
233 .poll
= n_hdlc_tty_poll
,
234 .receive_buf
= n_hdlc_tty_receive
,
235 .write_wakeup
= n_hdlc_tty_wakeup
,
236 .flush_buffer
= flush_rx_queue
,
240 * n_hdlc_release - release an n_hdlc per device line discipline info structure
241 * @n_hdlc - per device line discipline info structure
243 static void n_hdlc_release(struct n_hdlc
*n_hdlc
)
245 struct tty_struct
*tty
= n_hdlc2tty (n_hdlc
);
246 struct n_hdlc_buf
*buf
;
248 if (debuglevel
>= DEBUG_LEVEL_INFO
)
249 printk("%s(%d)n_hdlc_release() called\n",__FILE__
,__LINE__
);
251 /* Ensure that the n_hdlcd process is not hanging on select()/poll() */
252 wake_up_interruptible (&tty
->read_wait
);
253 wake_up_interruptible (&tty
->write_wait
);
255 if (tty
->disc_data
== n_hdlc
)
256 tty
->disc_data
= NULL
; /* Break the tty->n_hdlc link */
258 /* Release transmit and receive buffers */
260 buf
= n_hdlc_buf_get(&n_hdlc
->rx_free_buf_list
);
267 buf
= n_hdlc_buf_get(&n_hdlc
->tx_free_buf_list
);
274 buf
= n_hdlc_buf_get(&n_hdlc
->rx_buf_list
);
281 buf
= n_hdlc_buf_get(&n_hdlc
->tx_buf_list
);
290 } /* end of n_hdlc_release() */
293 * n_hdlc_tty_close - line discipline close
294 * @tty - pointer to tty info structure
296 * Called when the line discipline is changed to something
297 * else, the tty is closed, or the tty detects a hangup.
299 static void n_hdlc_tty_close(struct tty_struct
*tty
)
301 struct n_hdlc
*n_hdlc
= tty2n_hdlc (tty
);
303 if (debuglevel
>= DEBUG_LEVEL_INFO
)
304 printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__
,__LINE__
);
306 if (n_hdlc
!= NULL
) {
307 if (n_hdlc
->magic
!= HDLC_MAGIC
) {
308 printk (KERN_WARNING
"n_hdlc: trying to close unopened tty!\n");
311 #if defined(TTY_NO_WRITE_SPLIT)
312 clear_bit(TTY_NO_WRITE_SPLIT
,&tty
->flags
);
314 tty
->disc_data
= NULL
;
315 if (tty
== n_hdlc
->backup_tty
)
316 n_hdlc
->backup_tty
= NULL
;
317 if (tty
!= n_hdlc
->tty
)
319 if (n_hdlc
->backup_tty
) {
320 n_hdlc
->tty
= n_hdlc
->backup_tty
;
322 n_hdlc_release (n_hdlc
);
326 if (debuglevel
>= DEBUG_LEVEL_INFO
)
327 printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__
,__LINE__
);
329 } /* end of n_hdlc_tty_close() */
332 * n_hdlc_tty_open - called when line discipline changed to n_hdlc
333 * @tty - pointer to tty info structure
335 * Returns 0 if success, otherwise error code
337 static int n_hdlc_tty_open (struct tty_struct
*tty
)
339 struct n_hdlc
*n_hdlc
= tty2n_hdlc (tty
);
341 if (debuglevel
>= DEBUG_LEVEL_INFO
)
342 printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
346 /* There should not be an existing table for this slot. */
348 printk (KERN_ERR
"n_hdlc_tty_open:tty already associated!\n" );
352 n_hdlc
= n_hdlc_alloc();
354 printk (KERN_ERR
"n_hdlc_alloc failed\n");
358 tty
->disc_data
= n_hdlc
;
360 tty
->receive_room
= 65536;
362 #if defined(TTY_NO_WRITE_SPLIT)
363 /* change tty_io write() to not split large writes into 8K chunks */
364 set_bit(TTY_NO_WRITE_SPLIT
,&tty
->flags
);
367 /* flush receive data from driver */
368 tty_driver_flush_buffer(tty
);
370 if (debuglevel
>= DEBUG_LEVEL_INFO
)
371 printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__
,__LINE__
);
375 } /* end of n_tty_hdlc_open() */
378 * n_hdlc_send_frames - send frames on pending send buffer list
379 * @n_hdlc - pointer to ldisc instance data
380 * @tty - pointer to tty instance data
382 * Send frames on pending send buffer list until the driver does not accept a
383 * frame (busy) this function is called after adding a frame to the send buffer
384 * list and by the tty wakeup callback.
386 static void n_hdlc_send_frames(struct n_hdlc
*n_hdlc
, struct tty_struct
*tty
)
390 struct n_hdlc_buf
*tbuf
;
392 if (debuglevel
>= DEBUG_LEVEL_INFO
)
393 printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__
,__LINE__
);
396 spin_lock_irqsave(&n_hdlc
->tx_buf_list
.spinlock
, flags
);
399 spin_unlock_irqrestore(&n_hdlc
->tx_buf_list
.spinlock
, flags
);
404 spin_unlock_irqrestore(&n_hdlc
->tx_buf_list
.spinlock
, flags
);
406 /* get current transmit buffer or get new transmit */
407 /* buffer from list of pending transmit buffers */
411 tbuf
= n_hdlc_buf_get(&n_hdlc
->tx_buf_list
);
414 if (debuglevel
>= DEBUG_LEVEL_INFO
)
415 printk("%s(%d)sending frame %p, count=%d\n",
416 __FILE__
,__LINE__
,tbuf
,tbuf
->count
);
418 /* Send the next block of data to device */
419 set_bit(TTY_DO_WRITE_WAKEUP
, &tty
->flags
);
420 actual
= tty
->ops
->write(tty
, tbuf
->buf
, tbuf
->count
);
422 /* rollback was possible and has been done */
423 if (actual
== -ERESTARTSYS
) {
427 /* if transmit error, throw frame away by */
428 /* pretending it was accepted by driver */
430 actual
= tbuf
->count
;
432 if (actual
== tbuf
->count
) {
433 if (debuglevel
>= DEBUG_LEVEL_INFO
)
434 printk("%s(%d)frame %p completed\n",
435 __FILE__
,__LINE__
,tbuf
);
437 /* free current transmit buffer */
438 n_hdlc_buf_put(&n_hdlc
->tx_free_buf_list
, tbuf
);
440 /* this tx buffer is done */
443 /* wait up sleeping writers */
444 wake_up_interruptible(&tty
->write_wait
);
446 /* get next pending transmit buffer */
447 tbuf
= n_hdlc_buf_get(&n_hdlc
->tx_buf_list
);
449 if (debuglevel
>= DEBUG_LEVEL_INFO
)
450 printk("%s(%d)frame %p pending\n",
451 __FILE__
,__LINE__
,tbuf
);
453 /* buffer not accepted by driver */
454 /* set this buffer as pending buffer */
461 clear_bit(TTY_DO_WRITE_WAKEUP
, &tty
->flags
);
463 /* Clear the re-entry flag */
464 spin_lock_irqsave(&n_hdlc
->tx_buf_list
.spinlock
, flags
);
466 spin_unlock_irqrestore(&n_hdlc
->tx_buf_list
.spinlock
, flags
);
471 if (debuglevel
>= DEBUG_LEVEL_INFO
)
472 printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__
,__LINE__
);
474 } /* end of n_hdlc_send_frames() */
477 * n_hdlc_tty_wakeup - Callback for transmit wakeup
478 * @tty - pointer to associated tty instance data
480 * Called when low level device driver can accept more send data.
482 static void n_hdlc_tty_wakeup(struct tty_struct
*tty
)
484 struct n_hdlc
*n_hdlc
= tty2n_hdlc(tty
);
486 if (debuglevel
>= DEBUG_LEVEL_INFO
)
487 printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__
,__LINE__
);
492 if (tty
!= n_hdlc
->tty
) {
493 clear_bit(TTY_DO_WRITE_WAKEUP
, &tty
->flags
);
497 n_hdlc_send_frames (n_hdlc
, tty
);
499 } /* end of n_hdlc_tty_wakeup() */
502 * n_hdlc_tty_receive - Called by tty driver when receive data is available
503 * @tty - pointer to tty instance data
504 * @data - pointer to received data
505 * @flags - pointer to flags for data
506 * @count - count of received data in bytes
508 * Called by tty low level driver when receive data is available. Data is
509 * interpreted as one HDLC frame.
511 static void n_hdlc_tty_receive(struct tty_struct
*tty
, const __u8
*data
,
512 char *flags
, int count
)
514 register struct n_hdlc
*n_hdlc
= tty2n_hdlc (tty
);
515 register struct n_hdlc_buf
*buf
;
517 if (debuglevel
>= DEBUG_LEVEL_INFO
)
518 printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
519 __FILE__
,__LINE__
, count
);
521 /* This can happen if stuff comes in on the backup tty */
522 if (!n_hdlc
|| tty
!= n_hdlc
->tty
)
525 /* verify line is using HDLC discipline */
526 if (n_hdlc
->magic
!= HDLC_MAGIC
) {
527 printk("%s(%d) line not using HDLC discipline\n",
532 if ( count
>maxframe
) {
533 if (debuglevel
>= DEBUG_LEVEL_INFO
)
534 printk("%s(%d) rx count>maxframesize, data discarded\n",
539 /* get a free HDLC buffer */
540 buf
= n_hdlc_buf_get(&n_hdlc
->rx_free_buf_list
);
542 /* no buffers in free list, attempt to allocate another rx buffer */
543 /* unless the maximum count has been reached */
544 if (n_hdlc
->rx_buf_list
.count
< MAX_RX_BUF_COUNT
)
545 buf
= kmalloc(N_HDLC_BUF_SIZE
, GFP_ATOMIC
);
549 if (debuglevel
>= DEBUG_LEVEL_INFO
)
550 printk("%s(%d) no more rx buffers, data discarded\n",
555 /* copy received data to HDLC buffer */
556 memcpy(buf
->buf
,data
,count
);
559 /* add HDLC buffer to list of received frames */
560 n_hdlc_buf_put(&n_hdlc
->rx_buf_list
, buf
);
562 /* wake up any blocked reads and perform async signalling */
563 wake_up_interruptible (&tty
->read_wait
);
564 if (n_hdlc
->tty
->fasync
!= NULL
)
565 kill_fasync (&n_hdlc
->tty
->fasync
, SIGIO
, POLL_IN
);
567 } /* end of n_hdlc_tty_receive() */
570 * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
571 * @tty - pointer to tty instance data
572 * @file - pointer to open file object
573 * @buf - pointer to returned data buffer
574 * @nr - size of returned data buffer
576 * Returns the number of bytes returned or error code.
578 static ssize_t
n_hdlc_tty_read(struct tty_struct
*tty
, struct file
*file
,
579 __u8 __user
*buf
, size_t nr
)
581 struct n_hdlc
*n_hdlc
= tty2n_hdlc(tty
);
583 struct n_hdlc_buf
*rbuf
;
584 DECLARE_WAITQUEUE(wait
, current
);
586 if (debuglevel
>= DEBUG_LEVEL_INFO
)
587 printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__
,__LINE__
);
589 /* Validate the pointers */
593 /* verify user access to buffer */
594 if (!access_ok(VERIFY_WRITE
, buf
, nr
)) {
595 printk(KERN_WARNING
"%s(%d) n_hdlc_tty_read() can't verify user "
596 "buffer\n", __FILE__
, __LINE__
);
600 add_wait_queue(&tty
->read_wait
, &wait
);
603 if (test_bit(TTY_OTHER_CLOSED
, &tty
->flags
)) {
607 if (tty_hung_up_p(file
))
610 set_current_state(TASK_INTERRUPTIBLE
);
612 rbuf
= n_hdlc_buf_get(&n_hdlc
->rx_buf_list
);
614 if (rbuf
->count
> nr
) {
615 /* too large for caller's buffer */
618 if (copy_to_user(buf
, rbuf
->buf
, rbuf
->count
))
624 if (n_hdlc
->rx_free_buf_list
.count
>
625 DEFAULT_RX_BUF_COUNT
)
628 n_hdlc_buf_put(&n_hdlc
->rx_free_buf_list
, rbuf
);
633 if (file
->f_flags
& O_NONBLOCK
) {
640 if (signal_pending(current
)) {
646 remove_wait_queue(&tty
->read_wait
, &wait
);
647 __set_current_state(TASK_RUNNING
);
651 } /* end of n_hdlc_tty_read() */
654 * n_hdlc_tty_write - write a single frame of data to device
655 * @tty - pointer to associated tty device instance data
656 * @file - pointer to file object data
657 * @data - pointer to transmit data (one frame)
658 * @count - size of transmit frame in bytes
660 * Returns the number of bytes written (or error code).
662 static ssize_t
n_hdlc_tty_write(struct tty_struct
*tty
, struct file
*file
,
663 const unsigned char *data
, size_t count
)
665 struct n_hdlc
*n_hdlc
= tty2n_hdlc (tty
);
667 DECLARE_WAITQUEUE(wait
, current
);
668 struct n_hdlc_buf
*tbuf
;
670 if (debuglevel
>= DEBUG_LEVEL_INFO
)
671 printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n",
672 __FILE__
,__LINE__
,count
);
674 /* Verify pointers */
678 if (n_hdlc
->magic
!= HDLC_MAGIC
)
681 /* verify frame size */
682 if (count
> maxframe
) {
683 if (debuglevel
& DEBUG_LEVEL_INFO
)
685 "n_hdlc_tty_write: truncating user packet "
686 "from %lu to %d\n", (unsigned long) count
,
691 add_wait_queue(&tty
->write_wait
, &wait
);
694 set_current_state(TASK_INTERRUPTIBLE
);
696 tbuf
= n_hdlc_buf_get(&n_hdlc
->tx_free_buf_list
);
700 if (file
->f_flags
& O_NONBLOCK
) {
706 n_hdlc
= tty2n_hdlc (tty
);
707 if (!n_hdlc
|| n_hdlc
->magic
!= HDLC_MAGIC
||
708 tty
!= n_hdlc
->tty
) {
709 printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc
);
714 if (signal_pending(current
)) {
720 __set_current_state(TASK_RUNNING
);
721 remove_wait_queue(&tty
->write_wait
, &wait
);
724 /* Retrieve the user's buffer */
725 memcpy(tbuf
->buf
, data
, count
);
728 tbuf
->count
= error
= count
;
729 n_hdlc_buf_put(&n_hdlc
->tx_buf_list
,tbuf
);
730 n_hdlc_send_frames(n_hdlc
,tty
);
735 } /* end of n_hdlc_tty_write() */
738 * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
739 * @tty - pointer to tty instance data
740 * @file - pointer to open file object for device
741 * @cmd - IOCTL command code
742 * @arg - argument for IOCTL call (cmd dependent)
744 * Returns command dependent result.
746 static int n_hdlc_tty_ioctl(struct tty_struct
*tty
, struct file
*file
,
747 unsigned int cmd
, unsigned long arg
)
749 struct n_hdlc
*n_hdlc
= tty2n_hdlc (tty
);
754 if (debuglevel
>= DEBUG_LEVEL_INFO
)
755 printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
756 __FILE__
,__LINE__
,cmd
);
758 /* Verify the status of the device */
759 if (!n_hdlc
|| n_hdlc
->magic
!= HDLC_MAGIC
)
764 /* report count of read data available */
765 /* in next available frame (if any) */
766 spin_lock_irqsave(&n_hdlc
->rx_buf_list
.spinlock
,flags
);
767 if (n_hdlc
->rx_buf_list
.head
)
768 count
= n_hdlc
->rx_buf_list
.head
->count
;
771 spin_unlock_irqrestore(&n_hdlc
->rx_buf_list
.spinlock
,flags
);
772 error
= put_user(count
, (int __user
*)arg
);
776 /* get the pending tx byte count in the driver */
777 count
= tty_chars_in_buffer(tty
);
778 /* add size of next output frame in queue */
779 spin_lock_irqsave(&n_hdlc
->tx_buf_list
.spinlock
,flags
);
780 if (n_hdlc
->tx_buf_list
.head
)
781 count
+= n_hdlc
->tx_buf_list
.head
->count
;
782 spin_unlock_irqrestore(&n_hdlc
->tx_buf_list
.spinlock
,flags
);
783 error
= put_user(count
, (int __user
*)arg
);
792 /* fall through to default */
795 error
= n_tty_ioctl_helper(tty
, file
, cmd
, arg
);
800 } /* end of n_hdlc_tty_ioctl() */
803 * n_hdlc_tty_poll - TTY callback for poll system call
804 * @tty - pointer to tty instance data
805 * @filp - pointer to open file object for device
806 * @poll_table - wait queue for operations
808 * Determine which operations (read/write) will not block and return info
810 * Returns a bit mask containing info on which ops will not block.
812 static unsigned int n_hdlc_tty_poll(struct tty_struct
*tty
, struct file
*filp
,
815 struct n_hdlc
*n_hdlc
= tty2n_hdlc (tty
);
816 unsigned int mask
= 0;
818 if (debuglevel
>= DEBUG_LEVEL_INFO
)
819 printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__
,__LINE__
);
821 if (n_hdlc
&& n_hdlc
->magic
== HDLC_MAGIC
&& tty
== n_hdlc
->tty
) {
822 /* queue current process into any wait queue that */
823 /* may awaken in the future (read and write) */
825 poll_wait(filp
, &tty
->read_wait
, wait
);
826 poll_wait(filp
, &tty
->write_wait
, wait
);
828 /* set bits for operations that won't block */
829 if (n_hdlc
->rx_buf_list
.head
)
830 mask
|= POLLIN
| POLLRDNORM
; /* readable */
831 if (test_bit(TTY_OTHER_CLOSED
, &tty
->flags
))
833 if (tty_hung_up_p(filp
))
835 if (!tty_is_writelocked(tty
) &&
836 n_hdlc
->tx_free_buf_list
.head
)
837 mask
|= POLLOUT
| POLLWRNORM
; /* writable */
840 } /* end of n_hdlc_tty_poll() */
843 * n_hdlc_alloc - allocate an n_hdlc instance data structure
845 * Returns a pointer to newly created structure if success, otherwise %NULL
847 static struct n_hdlc
*n_hdlc_alloc(void)
849 struct n_hdlc_buf
*buf
;
851 struct n_hdlc
*n_hdlc
= kmalloc(sizeof(*n_hdlc
), GFP_KERNEL
);
856 memset(n_hdlc
, 0, sizeof(*n_hdlc
));
858 n_hdlc_buf_list_init(&n_hdlc
->rx_free_buf_list
);
859 n_hdlc_buf_list_init(&n_hdlc
->tx_free_buf_list
);
860 n_hdlc_buf_list_init(&n_hdlc
->rx_buf_list
);
861 n_hdlc_buf_list_init(&n_hdlc
->tx_buf_list
);
863 /* allocate free rx buffer list */
864 for(i
=0;i
<DEFAULT_RX_BUF_COUNT
;i
++) {
865 buf
= kmalloc(N_HDLC_BUF_SIZE
, GFP_KERNEL
);
867 n_hdlc_buf_put(&n_hdlc
->rx_free_buf_list
,buf
);
868 else if (debuglevel
>= DEBUG_LEVEL_INFO
)
869 printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__
,__LINE__
, i
);
872 /* allocate free tx buffer list */
873 for(i
=0;i
<DEFAULT_TX_BUF_COUNT
;i
++) {
874 buf
= kmalloc(N_HDLC_BUF_SIZE
, GFP_KERNEL
);
876 n_hdlc_buf_put(&n_hdlc
->tx_free_buf_list
,buf
);
877 else if (debuglevel
>= DEBUG_LEVEL_INFO
)
878 printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__
,__LINE__
, i
);
881 /* Initialize the control block */
882 n_hdlc
->magic
= HDLC_MAGIC
;
887 } /* end of n_hdlc_alloc() */
890 * n_hdlc_buf_list_init - initialize specified HDLC buffer list
891 * @list - pointer to buffer list
893 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list
*list
)
895 memset(list
, 0, sizeof(*list
));
896 spin_lock_init(&list
->spinlock
);
897 } /* end of n_hdlc_buf_list_init() */
900 * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
901 * @list - pointer to buffer list
902 * @buf - pointer to buffer
904 static void n_hdlc_buf_put(struct n_hdlc_buf_list
*list
,
905 struct n_hdlc_buf
*buf
)
908 spin_lock_irqsave(&list
->spinlock
,flags
);
912 list
->tail
->link
= buf
;
918 spin_unlock_irqrestore(&list
->spinlock
,flags
);
920 } /* end of n_hdlc_buf_put() */
923 * n_hdlc_buf_get - remove and return an HDLC buffer from list
924 * @list - pointer to HDLC buffer list
926 * Remove and return an HDLC buffer from the head of the specified HDLC buffer
928 * Returns a pointer to HDLC buffer if available, otherwise %NULL.
930 static struct n_hdlc_buf
* n_hdlc_buf_get(struct n_hdlc_buf_list
*list
)
933 struct n_hdlc_buf
*buf
;
934 spin_lock_irqsave(&list
->spinlock
,flags
);
938 list
->head
= buf
->link
;
944 spin_unlock_irqrestore(&list
->spinlock
,flags
);
947 } /* end of n_hdlc_buf_get() */
949 static char hdlc_banner
[] __initdata
=
950 KERN_INFO
"HDLC line discipline maxframe=%u\n";
951 static char hdlc_register_ok
[] __initdata
=
952 KERN_INFO
"N_HDLC line discipline registered.\n";
953 static char hdlc_register_fail
[] __initdata
=
954 KERN_ERR
"error registering line discipline: %d\n";
955 static char hdlc_init_fail
[] __initdata
=
956 KERN_INFO
"N_HDLC: init failure %d\n";
958 static int __init
n_hdlc_init(void)
962 /* range check maxframe arg */
965 else if (maxframe
> 65535)
968 printk(hdlc_banner
, maxframe
);
970 status
= tty_register_ldisc(N_HDLC
, &n_hdlc_ldisc
);
972 printk(hdlc_register_ok
);
974 printk(hdlc_register_fail
, status
);
977 printk(hdlc_init_fail
, status
);
980 } /* end of init_module() */
982 static char hdlc_unregister_ok
[] __exitdata
=
983 KERN_INFO
"N_HDLC: line discipline unregistered\n";
984 static char hdlc_unregister_fail
[] __exitdata
=
985 KERN_ERR
"N_HDLC: can't unregister line discipline (err = %d)\n";
987 static void __exit
n_hdlc_exit(void)
989 /* Release tty registration of line discipline */
990 int status
= tty_unregister_ldisc(N_HDLC
);
993 printk(hdlc_unregister_fail
, status
);
995 printk(hdlc_unregister_ok
);
998 module_init(n_hdlc_init
);
999 module_exit(n_hdlc_exit
);
1001 MODULE_LICENSE("GPL");
1002 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
1003 module_param(debuglevel
, int, 0);
1004 module_param(maxframe
, int, 0);
1005 MODULE_ALIAS_LDISC(N_HDLC
);