| blob | e4b07f0aa3cc0bfd955c1cebfcc1e1443065a4f9 |
1 /*
2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
21 /*
22 Module: rt2400pci
23 Abstract: Data structures and registers for the rt2400pci module.
24 Supported chipsets: RT2460.
25 */
27 #ifndef RT2400PCI_H
28 #define RT2400PCI_H
30 /*
31 * RF chip defines.
32 */
33 #define RF2420 0x0000
34 #define RF2421 0x0001
36 /*
37 * Signal information.
38 * Default offset is required for RSSI <-> dBm conversion.
39 */
40 #define DEFAULT_RSSI_OFFSET 100
42 /*
43 * Register layout information.
44 */
45 #define CSR_REG_BASE 0x0000
46 #define CSR_REG_SIZE 0x014c
47 #define EEPROM_BASE 0x0000
48 #define EEPROM_SIZE 0x0100
49 #define BBP_BASE 0x0000
50 #define BBP_SIZE 0x0020
51 #define RF_BASE 0x0004
52 #define RF_SIZE 0x000c
54 /*
55 * Number of TX queues.
56 */
57 #define NUM_TX_QUEUES 2
59 /*
60 * Control/Status Registers(CSR).
61 * Some values are set in TU, whereas 1 TU == 1024 us.
62 */
64 /*
65 * CSR0: ASIC revision number.
66 */
67 #define CSR0 0x0000
68 #define CSR0_REVISION FIELD32(0x0000ffff)
70 /*
71 * CSR1: System control register.
72 * SOFT_RESET: Software reset, 1: reset, 0: normal.
73 * BBP_RESET: Hardware reset, 1: reset, 0, release.
74 * HOST_READY: Host ready after initialization.
75 */
76 #define CSR1 0x0004
77 #define CSR1_SOFT_RESET FIELD32(0x00000001)
78 #define CSR1_BBP_RESET FIELD32(0x00000002)
79 #define CSR1_HOST_READY FIELD32(0x00000004)
81 /*
82 * CSR2: System admin status register (invalid).
83 */
84 #define CSR2 0x0008
86 /*
87 * CSR3: STA MAC address register 0.
88 */
89 #define CSR3 0x000c
90 #define CSR3_BYTE0 FIELD32(0x000000ff)
91 #define CSR3_BYTE1 FIELD32(0x0000ff00)
92 #define CSR3_BYTE2 FIELD32(0x00ff0000)
93 #define CSR3_BYTE3 FIELD32(0xff000000)
95 /*
96 * CSR4: STA MAC address register 1.
97 */
98 #define CSR4 0x0010
99 #define CSR4_BYTE4 FIELD32(0x000000ff)
100 #define CSR4_BYTE5 FIELD32(0x0000ff00)
102 /*
103 * CSR5: BSSID register 0.
104 */
105 #define CSR5 0x0014
106 #define CSR5_BYTE0 FIELD32(0x000000ff)
107 #define CSR5_BYTE1 FIELD32(0x0000ff00)
108 #define CSR5_BYTE2 FIELD32(0x00ff0000)
109 #define CSR5_BYTE3 FIELD32(0xff000000)
111 /*
112 * CSR6: BSSID register 1.
113 */
114 #define CSR6 0x0018
115 #define CSR6_BYTE4 FIELD32(0x000000ff)
116 #define CSR6_BYTE5 FIELD32(0x0000ff00)
118 /*
119 * CSR7: Interrupt source register.
120 * Write 1 to clear interrupt.
121 * TBCN_EXPIRE: Beacon timer expired interrupt.
122 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
123 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
124 * TXDONE_TXRING: Tx ring transmit done interrupt.
125 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
126 * TXDONE_PRIORING: Priority ring transmit done interrupt.
127 * RXDONE: Receive done interrupt.
128 */
129 #define CSR7 0x001c
130 #define CSR7_TBCN_EXPIRE FIELD32(0x00000001)
131 #define CSR7_TWAKE_EXPIRE FIELD32(0x00000002)
132 #define CSR7_TATIMW_EXPIRE FIELD32(0x00000004)
133 #define CSR7_TXDONE_TXRING FIELD32(0x00000008)
134 #define CSR7_TXDONE_ATIMRING FIELD32(0x00000010)
135 #define CSR7_TXDONE_PRIORING FIELD32(0x00000020)
136 #define CSR7_RXDONE FIELD32(0x00000040)
138 /*
139 * CSR8: Interrupt mask register.
140 * Write 1 to mask interrupt.
141 * TBCN_EXPIRE: Beacon timer expired interrupt.
142 * TWAKE_EXPIRE: Wakeup timer expired interrupt.
143 * TATIMW_EXPIRE: Timer of atim window expired interrupt.
144 * TXDONE_TXRING: Tx ring transmit done interrupt.
145 * TXDONE_ATIMRING: Atim ring transmit done interrupt.
146 * TXDONE_PRIORING: Priority ring transmit done interrupt.
147 * RXDONE: Receive done interrupt.
148 */
149 #define CSR8 0x0020
150 #define CSR8_TBCN_EXPIRE FIELD32(0x00000001)
151 #define CSR8_TWAKE_EXPIRE FIELD32(0x00000002)
152 #define CSR8_TATIMW_EXPIRE FIELD32(0x00000004)
153 #define CSR8_TXDONE_TXRING FIELD32(0x00000008)
154 #define CSR8_TXDONE_ATIMRING FIELD32(0x00000010)
155 #define CSR8_TXDONE_PRIORING FIELD32(0x00000020)
156 #define CSR8_RXDONE FIELD32(0x00000040)
158 /*
159 * CSR9: Maximum frame length register.
160 * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12.
161 */
162 #define CSR9 0x0024
163 #define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80)
165 /*
166 * CSR11: Back-off control register.
167 * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1).
168 * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1).
169 * SLOT_TIME: Slot time, default is 20us for 802.11b.
170 * LONG_RETRY: Long retry count.
171 * SHORT_RETRY: Short retry count.
172 */
173 #define CSR11 0x002c
174 #define CSR11_CWMIN FIELD32(0x0000000f)
175 #define CSR11_CWMAX FIELD32(0x000000f0)
176 #define CSR11_SLOT_TIME FIELD32(0x00001f00)
177 #define CSR11_LONG_RETRY FIELD32(0x00ff0000)
178 #define CSR11_SHORT_RETRY FIELD32(0xff000000)
180 /*
181 * CSR12: Synchronization configuration register 0.
182 * All units in 1/16 TU.
183 * BEACON_INTERVAL: Beacon interval, default is 100 TU.
184 * CFPMAX_DURATION: Cfp maximum duration, default is 100 TU.
185 */
186 #define CSR12 0x0030
187 #define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff)
188 #define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000)
190 /*
191 * CSR13: Synchronization configuration register 1.
192 * All units in 1/16 TU.
193 * ATIMW_DURATION: Atim window duration.
194 * CFP_PERIOD: Cfp period, default is 0 TU.
195 */
196 #define CSR13 0x0034
197 #define CSR13_ATIMW_DURATION FIELD32(0x0000ffff)
198 #define CSR13_CFP_PERIOD FIELD32(0x00ff0000)
200 /*
201 * CSR14: Synchronization control register.
202 * TSF_COUNT: Enable tsf auto counting.
203 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
204 * TBCN: Enable tbcn with reload value.
205 * TCFP: Enable tcfp & cfp / cp switching.
206 * TATIMW: Enable tatimw & atim window switching.
207 * BEACON_GEN: Enable beacon generator.
208 * CFP_COUNT_PRELOAD: Cfp count preload value.
209 * TBCM_PRELOAD: Tbcn preload value in units of 64us.
210 */
211 #define CSR14 0x0038
212 #define CSR14_TSF_COUNT FIELD32(0x00000001)
213 #define CSR14_TSF_SYNC FIELD32(0x00000006)
214 #define CSR14_TBCN FIELD32(0x00000008)
215 #define CSR14_TCFP FIELD32(0x00000010)
216 #define CSR14_TATIMW FIELD32(0x00000020)
217 #define CSR14_BEACON_GEN FIELD32(0x00000040)
218 #define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00)
219 #define CSR14_TBCM_PRELOAD FIELD32(0xffff0000)
221 /*
222 * CSR15: Synchronization status register.
223 * CFP: ASIC is in contention-free period.
224 * ATIMW: ASIC is in ATIM window.
225 * BEACON_SENT: Beacon is send.
226 */
227 #define CSR15 0x003c
228 #define CSR15_CFP FIELD32(0x00000001)
229 #define CSR15_ATIMW FIELD32(0x00000002)
230 #define CSR15_BEACON_SENT FIELD32(0x00000004)
232 /*
233 * CSR16: TSF timer register 0.
234 */
235 #define CSR16 0x0040
236 #define CSR16_LOW_TSFTIMER FIELD32(0xffffffff)
238 /*
239 * CSR17: TSF timer register 1.
240 */
241 #define CSR17 0x0044
242 #define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff)
244 /*
245 * CSR18: IFS timer register 0.
246 * SIFS: Sifs, default is 10 us.
247 * PIFS: Pifs, default is 30 us.
248 */
249 #define CSR18 0x0048
250 #define CSR18_SIFS FIELD32(0x0000ffff)
251 #define CSR18_PIFS FIELD32(0xffff0000)
253 /*
254 * CSR19: IFS timer register 1.
255 * DIFS: Difs, default is 50 us.
256 * EIFS: Eifs, default is 364 us.
257 */
258 #define CSR19 0x004c
259 #define CSR19_DIFS FIELD32(0x0000ffff)
260 #define CSR19_EIFS FIELD32(0xffff0000)
262 /*
263 * CSR20: Wakeup timer register.
264 * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU.
265 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
266 * AUTOWAKE: Enable auto wakeup / sleep mechanism.
267 */
268 #define CSR20 0x0050
269 #define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff)
270 #define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000)
271 #define CSR20_AUTOWAKE FIELD32(0x01000000)
273 /*
274 * CSR21: EEPROM control register.
275 * RELOAD: Write 1 to reload eeprom content.
276 * TYPE_93C46: 1: 93c46, 0:93c66.
277 */
278 #define CSR21 0x0054
279 #define CSR21_RELOAD FIELD32(0x00000001)
280 #define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002)
281 #define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004)
282 #define CSR21_EEPROM_DATA_IN FIELD32(0x00000008)
283 #define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010)
284 #define CSR21_TYPE_93C46 FIELD32(0x00000020)
286 /*
287 * CSR22: CFP control register.
288 * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU.
289 * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain.
290 */
291 #define CSR22 0x0058
292 #define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff)
293 #define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000)
295 /*
296 * Transmit related CSRs.
297 * Some values are set in TU, whereas 1 TU == 1024 us.
298 */
300 /*
301 * TXCSR0: TX Control Register.
302 * KICK_TX: Kick tx ring.
303 * KICK_ATIM: Kick atim ring.
304 * KICK_PRIO: Kick priority ring.
305 * ABORT: Abort all transmit related ring operation.
306 */
307 #define TXCSR0 0x0060
308 #define TXCSR0_KICK_TX FIELD32(0x00000001)
309 #define TXCSR0_KICK_ATIM FIELD32(0x00000002)
310 #define TXCSR0_KICK_PRIO FIELD32(0x00000004)
311 #define TXCSR0_ABORT FIELD32(0x00000008)
313 /*
314 * TXCSR1: TX Configuration Register.
315 * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps.
316 * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps.
317 * TSF_OFFSET: Insert tsf offset.
318 * AUTORESPONDER: Enable auto responder which include ack & cts.
319 */
320 #define TXCSR1 0x0064
321 #define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff)
322 #define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00)
323 #define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000)
324 #define TXCSR1_AUTORESPONDER FIELD32(0x01000000)
326 /*
327 * TXCSR2: Tx descriptor configuration register.
328 * TXD_SIZE: Tx descriptor size, default is 48.
329 * NUM_TXD: Number of tx entries in ring.
330 * NUM_ATIM: Number of atim entries in ring.
331 * NUM_PRIO: Number of priority entries in ring.
332 */
333 #define TXCSR2 0x0068
334 #define TXCSR2_TXD_SIZE FIELD32(0x000000ff)
335 #define TXCSR2_NUM_TXD FIELD32(0x0000ff00)
336 #define TXCSR2_NUM_ATIM FIELD32(0x00ff0000)
337 #define TXCSR2_NUM_PRIO FIELD32(0xff000000)
339 /*
340 * TXCSR3: TX Ring Base address register.
341 */
342 #define TXCSR3 0x006c
343 #define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff)
345 /*
346 * TXCSR4: TX Atim Ring Base address register.
347 */
348 #define TXCSR4 0x0070
349 #define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff)
351 /*
352 * TXCSR5: TX Prio Ring Base address register.
353 */
354 #define TXCSR5 0x0074
355 #define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff)
357 /*
358 * TXCSR6: Beacon Base address register.
359 */
360 #define TXCSR6 0x0078
361 #define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff)
363 /*
364 * TXCSR7: Auto responder control register.
365 * AR_POWERMANAGEMENT: Auto responder power management bit.
366 */
367 #define TXCSR7 0x007c
368 #define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001)
370 /*
371 * Receive related CSRs.
372 * Some values are set in TU, whereas 1 TU == 1024 us.
373 */
375 /*
376 * RXCSR0: RX Control Register.
377 * DISABLE_RX: Disable rx engine.
378 * DROP_CRC: Drop crc error.
379 * DROP_PHYSICAL: Drop physical error.
380 * DROP_CONTROL: Drop control frame.
381 * DROP_NOT_TO_ME: Drop not to me unicast frame.
382 * DROP_TODS: Drop frame tods bit is true.
383 * DROP_VERSION_ERROR: Drop version error frame.
384 * PASS_CRC: Pass all packets with crc attached.
385 */
386 #define RXCSR0 0x0080
387 #define RXCSR0_DISABLE_RX FIELD32(0x00000001)
388 #define RXCSR0_DROP_CRC FIELD32(0x00000002)
389 #define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004)
390 #define RXCSR0_DROP_CONTROL FIELD32(0x00000008)
391 #define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010)
392 #define RXCSR0_DROP_TODS FIELD32(0x00000020)
393 #define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040)
394 #define RXCSR0_PASS_CRC FIELD32(0x00000080)
396 /*
397 * RXCSR1: RX descriptor configuration register.
398 * RXD_SIZE: Rx descriptor size, default is 32b.
399 * NUM_RXD: Number of rx entries in ring.
400 */
401 #define RXCSR1 0x0084
402 #define RXCSR1_RXD_SIZE FIELD32(0x000000ff)
403 #define RXCSR1_NUM_RXD FIELD32(0x0000ff00)
405 /*
406 * RXCSR2: RX Ring base address register.
407 */
408 #define RXCSR2 0x0088
409 #define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff)
411 /*
412 * RXCSR3: BBP ID register for Rx operation.
413 * BBP_ID#: BBP register # id.
414 * BBP_ID#_VALID: BBP register # id is valid or not.
415 */
416 #define RXCSR3 0x0090
417 #define RXCSR3_BBP_ID0 FIELD32(0x0000007f)
418 #define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080)
419 #define RXCSR3_BBP_ID1 FIELD32(0x00007f00)
420 #define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000)
421 #define RXCSR3_BBP_ID2 FIELD32(0x007f0000)
422 #define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000)
423 #define RXCSR3_BBP_ID3 FIELD32(0x7f000000)
424 #define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000)
426 /*
427 * RXCSR4: BBP ID register for Rx operation.
428 * BBP_ID#: BBP register # id.
429 * BBP_ID#_VALID: BBP register # id is valid or not.
430 */
431 #define RXCSR4 0x0094
432 #define RXCSR4_BBP_ID4 FIELD32(0x0000007f)
433 #define RXCSR4_BBP_ID4_VALID FIELD32(0x00000080)
434 #define RXCSR4_BBP_ID5 FIELD32(0x00007f00)
435 #define RXCSR4_BBP_ID5_VALID FIELD32(0x00008000)
437 /*
438 * ARCSR0: Auto Responder PLCP config register 0.
439 * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data.
440 * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id.
441 */
442 #define ARCSR0 0x0098
443 #define ARCSR0_AR_BBP_DATA0 FIELD32(0x000000ff)
444 #define ARCSR0_AR_BBP_ID0 FIELD32(0x0000ff00)
445 #define ARCSR0_AR_BBP_DATA1 FIELD32(0x00ff0000)
446 #define ARCSR0_AR_BBP_ID1 FIELD32(0xff000000)
448 /*
449 * ARCSR1: Auto Responder PLCP config register 1.
450 * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data.
451 * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id.
452 */
453 #define ARCSR1 0x009c
454 #define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff)
455 #define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00)
456 #define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000)
457 #define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000)
459 /*
460 * Miscellaneous Registers.
461 * Some values are set in TU, whereas 1 TU == 1024 us.
462 */
464 /*
465 * PCICSR: PCI control register.
466 * BIG_ENDIAN: 1: big endian, 0: little endian.
467 * RX_TRESHOLD: Rx threshold in dw to start pci access
468 * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw.
469 * TX_TRESHOLD: Tx threshold in dw to start pci access
470 * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward.
471 * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw.
472 * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational.
473 */
474 #define PCICSR 0x008c
475 #define PCICSR_BIG_ENDIAN FIELD32(0x00000001)
476 #define PCICSR_RX_TRESHOLD FIELD32(0x00000006)
477 #define PCICSR_TX_TRESHOLD FIELD32(0x00000018)
478 #define PCICSR_BURST_LENTH FIELD32(0x00000060)
479 #define PCICSR_ENABLE_CLK FIELD32(0x00000080)
481 /*
482 * CNT0: FCS error count.
483 * FCS_ERROR: FCS error count, cleared when read.
484 */
485 #define CNT0 0x00a0
486 #define CNT0_FCS_ERROR FIELD32(0x0000ffff)
488 /*
489 * Statistic Register.
490 * CNT1: PLCP error count.
491 * CNT2: Long error count.
492 * CNT3: CCA false alarm count.
493 * CNT4: Rx FIFO overflow count.
494 * CNT5: Tx FIFO underrun count.
495 */
496 #define TIMECSR2 0x00a8
497 #define CNT1 0x00ac
498 #define CNT2 0x00b0
499 #define TIMECSR3 0x00b4
500 #define CNT3 0x00b8
501 #define CNT4 0x00bc
502 #define CNT5 0x00c0
504 /*
505 * Baseband Control Register.
506 */
508 /*
509 * PWRCSR0: Power mode configuration register.
510 */
511 #define PWRCSR0 0x00c4
513 /*
514 * Power state transition time registers.
515 */
516 #define PSCSR0 0x00c8
517 #define PSCSR1 0x00cc
518 #define PSCSR2 0x00d0
519 #define PSCSR3 0x00d4
521 /*
522 * PWRCSR1: Manual power control / status register.
523 * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake.
524 * SET_STATE: Set state. Write 1 to trigger, self cleared.
525 * BBP_DESIRE_STATE: BBP desired state.
526 * RF_DESIRE_STATE: RF desired state.
527 * BBP_CURR_STATE: BBP current state.
528 * RF_CURR_STATE: RF current state.
529 * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared.
530 */
531 #define PWRCSR1 0x00d8
532 #define PWRCSR1_SET_STATE FIELD32(0x00000001)
533 #define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006)
534 #define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018)
535 #define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060)
536 #define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180)
537 #define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200)
539 /*
540 * TIMECSR: Timer control register.
541 * US_COUNT: 1 us timer count in units of clock cycles.
542 * US_64_COUNT: 64 us timer count in units of 1 us timer.
543 * BEACON_EXPECT: Beacon expect window.
544 */
545 #define TIMECSR 0x00dc
546 #define TIMECSR_US_COUNT FIELD32(0x000000ff)
547 #define TIMECSR_US_64_COUNT FIELD32(0x0000ff00)
548 #define TIMECSR_BEACON_EXPECT FIELD32(0x00070000)
550 /*
551 * MACCSR0: MAC configuration register 0.
552 */
553 #define MACCSR0 0x00e0
555 /*
556 * MACCSR1: MAC configuration register 1.
557 * KICK_RX: Kick one-shot rx in one-shot rx mode.
558 * ONESHOT_RXMODE: Enable one-shot rx mode for debugging.
559 * BBPRX_RESET_MODE: Ralink bbp rx reset mode.
560 * AUTO_TXBBP: Auto tx logic access bbp control register.
561 * AUTO_RXBBP: Auto rx logic access bbp control register.
562 * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd.
563 * INTERSIL_IF: Intersil if calibration pin.
564 */
565 #define MACCSR1 0x00e4
566 #define MACCSR1_KICK_RX FIELD32(0x00000001)
567 #define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002)
568 #define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004)
569 #define MACCSR1_AUTO_TXBBP FIELD32(0x00000008)
570 #define MACCSR1_AUTO_RXBBP FIELD32(0x00000010)
571 #define MACCSR1_LOOPBACK FIELD32(0x00000060)
572 #define MACCSR1_INTERSIL_IF FIELD32(0x00000080)
574 /*
575 * RALINKCSR: Ralink Rx auto-reset BBCR.
576 * AR_BBP_DATA#: Auto reset BBP register # data.
577 * AR_BBP_ID#: Auto reset BBP register # id.
578 */
579 #define RALINKCSR 0x00e8
580 #define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff)
581 #define RALINKCSR_AR_BBP_ID0 FIELD32(0x0000ff00)
582 #define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000)
583 #define RALINKCSR_AR_BBP_ID1 FIELD32(0xff000000)
585 /*
586 * BCNCSR: Beacon interval control register.
587 * CHANGE: Write one to change beacon interval.
588 * DELTATIME: The delta time value.
589 * NUM_BEACON: Number of beacon according to mode.
590 * MODE: Please refer to asic specs.
591 * PLUS: Plus or minus delta time value.
592 */
593 #define BCNCSR 0x00ec
594 #define BCNCSR_CHANGE FIELD32(0x00000001)
595 #define BCNCSR_DELTATIME FIELD32(0x0000001e)
596 #define BCNCSR_NUM_BEACON FIELD32(0x00001fe0)
597 #define BCNCSR_MODE FIELD32(0x00006000)
598 #define BCNCSR_PLUS FIELD32(0x00008000)
600 /*
601 * BBP / RF / IF Control Register.
602 */
604 /*
605 * BBPCSR: BBP serial control register.
606 * VALUE: Register value to program into BBP.
607 * REGNUM: Selected BBP register.
608 * BUSY: 1: asic is busy execute BBP programming.
609 * WRITE_CONTROL: 1: write BBP, 0: read BBP.
610 */
611 #define BBPCSR 0x00f0
612 #define BBPCSR_VALUE FIELD32(0x000000ff)
613 #define BBPCSR_REGNUM FIELD32(0x00007f00)
614 #define BBPCSR_BUSY FIELD32(0x00008000)
615 #define BBPCSR_WRITE_CONTROL FIELD32(0x00010000)
617 /*
618 * RFCSR: RF serial control register.
619 * VALUE: Register value + id to program into rf/if.
620 * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22).
621 * IF_SELECT: Chip to program: 0: rf, 1: if.
622 * PLL_LD: Rf pll_ld status.
623 * BUSY: 1: asic is busy execute rf programming.
624 */
625 #define RFCSR 0x00f4
626 #define RFCSR_VALUE FIELD32(0x00ffffff)
627 #define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000)
628 #define RFCSR_IF_SELECT FIELD32(0x20000000)
629 #define RFCSR_PLL_LD FIELD32(0x40000000)
630 #define RFCSR_BUSY FIELD32(0x80000000)
632 /*
633 * LEDCSR: LED control register.
634 * ON_PERIOD: On period, default 70ms.
635 * OFF_PERIOD: Off period, default 30ms.
636 * LINK: 0: linkoff, 1: linkup.
637 * ACTIVITY: 0: idle, 1: active.
638 */
639 #define LEDCSR 0x00f8
640 #define LEDCSR_ON_PERIOD FIELD32(0x000000ff)
641 #define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00)
642 #define LEDCSR_LINK FIELD32(0x00010000)
643 #define LEDCSR_ACTIVITY FIELD32(0x00020000)
645 /*
646 * ASIC pointer information.
647 * RXPTR: Current RX ring address.
648 * TXPTR: Current Tx ring address.
649 * PRIPTR: Current Priority ring address.
650 * ATIMPTR: Current ATIM ring address.
651 */
652 #define RXPTR 0x0100
653 #define TXPTR 0x0104
654 #define PRIPTR 0x0108
655 #define ATIMPTR 0x010c
657 /*
658 * GPIO and others.
659 */
661 /*
662 * GPIOCSR: GPIO control register.
663 * GPIOCSR_VALx: Actual GPIO pin x value
664 * GPIOCSR_DIRx: GPIO direction: 0 = output; 1 = input
665 */
666 #define GPIOCSR 0x0120
667 #define GPIOCSR_VAL0 FIELD32(0x00000001)
668 #define GPIOCSR_VAL1 FIELD32(0x00000002)
669 #define GPIOCSR_VAL2 FIELD32(0x00000004)
670 #define GPIOCSR_VAL3 FIELD32(0x00000008)
671 #define GPIOCSR_VAL4 FIELD32(0x00000010)
672 #define GPIOCSR_VAL5 FIELD32(0x00000020)
673 #define GPIOCSR_VAL6 FIELD32(0x00000040)
674 #define GPIOCSR_VAL7 FIELD32(0x00000080)
675 #define GPIOCSR_DIR0 FIELD32(0x00000100)
676 #define GPIOCSR_DIR1 FIELD32(0x00000200)
677 #define GPIOCSR_DIR2 FIELD32(0x00000400)
678 #define GPIOCSR_DIR3 FIELD32(0x00000800)
679 #define GPIOCSR_DIR4 FIELD32(0x00001000)
680 #define GPIOCSR_DIR5 FIELD32(0x00002000)
681 #define GPIOCSR_DIR6 FIELD32(0x00004000)
682 #define GPIOCSR_DIR7 FIELD32(0x00008000)
684 /*
685 * BBPPCSR: BBP Pin control register.
686 */
687 #define BBPPCSR 0x0124
689 /*
690 * BCNCSR1: Tx BEACON offset time control register.
691 * PRELOAD: Beacon timer offset in units of usec.
692 */
693 #define BCNCSR1 0x0130
694 #define BCNCSR1_PRELOAD FIELD32(0x0000ffff)
696 /*
697 * MACCSR2: TX_PE to RX_PE turn-around time control register
698 * DELAY: RX_PE low width, in units of pci clock cycle.
699 */
700 #define MACCSR2 0x0134
701 #define MACCSR2_DELAY FIELD32(0x000000ff)
703 /*
704 * ARCSR2: 1 Mbps ACK/CTS PLCP.
705 */
706 #define ARCSR2 0x013c
707 #define ARCSR2_SIGNAL FIELD32(0x000000ff)
708 #define ARCSR2_SERVICE FIELD32(0x0000ff00)
709 #define ARCSR2_LENGTH_LOW FIELD32(0x00ff0000)
710 #define ARCSR2_LENGTH FIELD32(0xffff0000)
712 /*
713 * ARCSR3: 2 Mbps ACK/CTS PLCP.
714 */
715 #define ARCSR3 0x0140
716 #define ARCSR3_SIGNAL FIELD32(0x000000ff)
717 #define ARCSR3_SERVICE FIELD32(0x0000ff00)
718 #define ARCSR3_LENGTH FIELD32(0xffff0000)
720 /*
721 * ARCSR4: 5.5 Mbps ACK/CTS PLCP.
722 */
723 #define ARCSR4 0x0144
724 #define ARCSR4_SIGNAL FIELD32(0x000000ff)
725 #define ARCSR4_SERVICE FIELD32(0x0000ff00)
726 #define ARCSR4_LENGTH FIELD32(0xffff0000)
728 /*
729 * ARCSR5: 11 Mbps ACK/CTS PLCP.
730 */
731 #define ARCSR5 0x0148
732 #define ARCSR5_SIGNAL FIELD32(0x000000ff)
733 #define ARCSR5_SERVICE FIELD32(0x0000ff00)
734 #define ARCSR5_LENGTH FIELD32(0xffff0000)
736 /*
737 * BBP registers.
738 * The wordsize of the BBP is 8 bits.
739 */
741 /*
742 * R1: TX antenna control
743 */
744 #define BBP_R1_TX_ANTENNA FIELD8(0x03)
746 /*
747 * R4: RX antenna control
748 */
749 #define BBP_R4_RX_ANTENNA FIELD8(0x06)
751 /*
752 * RF registers
753 */
755 /*
756 * RF 1
757 */
758 #define RF1_TUNER FIELD32(0x00020000)
760 /*
761 * RF 3
762 */
763 #define RF3_TUNER FIELD32(0x00000100)
764 #define RF3_TXPOWER FIELD32(0x00003e00)
766 /*
767 * EEPROM content.
768 * The wordsize of the EEPROM is 16 bits.
769 */
771 /*
772 * HW MAC address.
773 */
774 #define EEPROM_MAC_ADDR_0 0x0002
775 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
776 #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
777 #define EEPROM_MAC_ADDR1 0x0003
778 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
779 #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
780 #define EEPROM_MAC_ADDR_2 0x0004
781 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
782 #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
784 /*
785 * EEPROM antenna.
786 * ANTENNA_NUM: Number of antenna's.
787 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
788 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
789 * RF_TYPE: Rf_type of this adapter.
790 * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd.
791 * RX_AGCVGC: 0: disable, 1:enable BBP R13 tuning.
792 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
793 */
794 #define EEPROM_ANTENNA 0x0b
795 #define EEPROM_ANTENNA_NUM FIELD16(0x0003)
796 #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
797 #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
798 #define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0040)
799 #define EEPROM_ANTENNA_LED_MODE FIELD16(0x0180)
800 #define EEPROM_ANTENNA_RX_AGCVGC_TUNING FIELD16(0x0200)
801 #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
803 /*
804 * EEPROM BBP.
805 */
806 #define EEPROM_BBP_START 0x0c
807 #define EEPROM_BBP_SIZE 7
808 #define EEPROM_BBP_VALUE FIELD16(0x00ff)
809 #define EEPROM_BBP_REG_ID FIELD16(0xff00)
811 /*
812 * EEPROM TXPOWER
813 */
814 #define EEPROM_TXPOWER_START 0x13
815 #define EEPROM_TXPOWER_SIZE 7
816 #define EEPROM_TXPOWER_1 FIELD16(0x00ff)
817 #define EEPROM_TXPOWER_2 FIELD16(0xff00)
819 /*
820 * DMA descriptor defines.
821 */
822 #define TXD_DESC_SIZE (8 * sizeof(__le32))
823 #define RXD_DESC_SIZE (8 * sizeof(__le32))
825 /*
826 * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
827 */
829 /*
830 * Word0
831 */
832 #define TXD_W0_OWNER_NIC FIELD32(0x00000001)
833 #define TXD_W0_VALID FIELD32(0x00000002)
834 #define TXD_W0_RESULT FIELD32(0x0000001c)
835 #define TXD_W0_RETRY_COUNT FIELD32(0x000000e0)
836 #define TXD_W0_MORE_FRAG FIELD32(0x00000100)
837 #define TXD_W0_ACK FIELD32(0x00000200)
838 #define TXD_W0_TIMESTAMP FIELD32(0x00000400)
839 #define TXD_W0_RTS FIELD32(0x00000800)
840 #define TXD_W0_IFS FIELD32(0x00006000)
841 #define TXD_W0_RETRY_MODE FIELD32(0x00008000)
842 #define TXD_W0_AGC FIELD32(0x00ff0000)
843 #define TXD_W0_R2 FIELD32(0xff000000)
845 /*
846 * Word1
847 */
848 #define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
850 /*
851 * Word2
852 */
853 #define TXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff)
854 #define TXD_W2_DATABYTE_COUNT FIELD32(0xffff0000)
856 /*
857 * Word3 & 4: PLCP information
858 * The PLCP values should be treated as if they were BBP values.
859 */
860 #define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff)
861 #define TXD_W3_PLCP_SIGNAL_REGNUM FIELD32(0x00007f00)
862 #define TXD_W3_PLCP_SIGNAL_BUSY FIELD32(0x00008000)
863 #define TXD_W3_PLCP_SERVICE FIELD32(0x00ff0000)
864 #define TXD_W3_PLCP_SERVICE_REGNUM FIELD32(0x7f000000)
865 #define TXD_W3_PLCP_SERVICE_BUSY FIELD32(0x80000000)
867 #define TXD_W4_PLCP_LENGTH_LOW FIELD32(0x000000ff)
868 #define TXD_W3_PLCP_LENGTH_LOW_REGNUM FIELD32(0x00007f00)
869 #define TXD_W3_PLCP_LENGTH_LOW_BUSY FIELD32(0x00008000)
870 #define TXD_W4_PLCP_LENGTH_HIGH FIELD32(0x00ff0000)
871 #define TXD_W3_PLCP_LENGTH_HIGH_REGNUM FIELD32(0x7f000000)
872 #define TXD_W3_PLCP_LENGTH_HIGH_BUSY FIELD32(0x80000000)
874 /*
875 * Word5
876 */
877 #define TXD_W5_BBCR4 FIELD32(0x0000ffff)
878 #define TXD_W5_AGC_REG FIELD32(0x007f0000)
879 #define TXD_W5_AGC_REG_VALID FIELD32(0x00800000)
880 #define TXD_W5_XXX_REG FIELD32(0x7f000000)
881 #define TXD_W5_XXX_REG_VALID FIELD32(0x80000000)
883 /*
884 * Word6
885 */
886 #define TXD_W6_SK_BUFF FIELD32(0xffffffff)
888 /*
889 * Word7
890 */
891 #define TXD_W7_RESERVED FIELD32(0xffffffff)
893 /*
894 * RX descriptor format for RX Ring.
895 */
897 /*
898 * Word0
899 */
900 #define RXD_W0_OWNER_NIC FIELD32(0x00000001)
901 #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002)
902 #define RXD_W0_MULTICAST FIELD32(0x00000004)
903 #define RXD_W0_BROADCAST FIELD32(0x00000008)
904 #define RXD_W0_MY_BSS FIELD32(0x00000010)
905 #define RXD_W0_CRC_ERROR FIELD32(0x00000020)
906 #define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080)
907 #define RXD_W0_DATABYTE_COUNT FIELD32(0xffff0000)
909 /*
910 * Word1
911 */
912 #define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff)
914 /*
915 * Word2
916 */
917 #define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff)
918 #define RXD_W2_BBR0 FIELD32(0x00ff0000)
919 #define RXD_W2_SIGNAL FIELD32(0xff000000)
921 /*
922 * Word3
923 */
924 #define RXD_W3_RSSI FIELD32(0x000000ff)
925 #define RXD_W3_BBR3 FIELD32(0x0000ff00)
926 #define RXD_W3_BBR4 FIELD32(0x00ff0000)
927 #define RXD_W3_BBR5 FIELD32(0xff000000)
929 /*
930 * Word4
931 */
932 #define RXD_W4_RX_END_TIME FIELD32(0xffffffff)
934 /*
935 * Word5 & 6 & 7: Reserved
936 */
937 #define RXD_W5_RESERVED FIELD32(0xffffffff)
938 #define RXD_W6_RESERVED FIELD32(0xffffffff)
939 #define RXD_W7_RESERVED FIELD32(0xffffffff)
941 /*
942 * Macros for converting txpower from EEPROM to mac80211 value
943 * and from mac80211 value to register value.
944 * NOTE: Logics in rt2400pci for txpower are reversed
945 * compared to the other rt2x00 drivers. A higher txpower
946 * value means that the txpower must be lowered. This is
947 * important when converting the value coming from the
948 * mac80211 stack to the rt2400 acceptable value.
949 */
950 #define MIN_TXPOWER 31
951 #define MAX_TXPOWER 62
952 #define DEFAULT_TXPOWER 39
954 #define __CLAMP_TX(__txpower) \
955 clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER)
957 #define TXPOWER_FROM_DEV(__txpower) \
958 ((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER)
960 #define TXPOWER_TO_DEV(__txpower) \
961 (MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER))