Merge branch 'dt/gic' into highbank/soc
[linux-2.6.git] / arch / arm / mach-orion5x / db88f5281-setup.c
blob4b79a80d5e1f67154adc0544e484726e0d5f3686
1 /*
2 * arch/arm/mach-orion5x/db88f5281-setup.c
4 * Marvell Orion-2 Development Board Setup
6 * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
12 #include <linux/gpio.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
16 #include <linux/pci.h>
17 #include <linux/irq.h>
18 #include <linux/mtd/physmap.h>
19 #include <linux/mtd/nand.h>
20 #include <linux/timer.h>
21 #include <linux/mv643xx_eth.h>
22 #include <linux/i2c.h>
23 #include <asm/mach-types.h>
24 #include <asm/mach/arch.h>
25 #include <asm/mach/pci.h>
26 #include <mach/orion5x.h>
27 #include <plat/orion_nand.h>
28 #include "common.h"
29 #include "mpp.h"
31 /*****************************************************************************
32 * DB-88F5281 on board devices
33 ****************************************************************************/
36 * 512K NOR flash Device bus boot chip select
39 #define DB88F5281_NOR_BOOT_BASE 0xf4000000
40 #define DB88F5281_NOR_BOOT_SIZE SZ_512K
43 * 7-Segment on Device bus chip select 0
46 #define DB88F5281_7SEG_BASE 0xfa000000
47 #define DB88F5281_7SEG_SIZE SZ_1K
50 * 32M NOR flash on Device bus chip select 1
53 #define DB88F5281_NOR_BASE 0xfc000000
54 #define DB88F5281_NOR_SIZE SZ_32M
57 * 32M NAND flash on Device bus chip select 2
60 #define DB88F5281_NAND_BASE 0xfa800000
61 #define DB88F5281_NAND_SIZE SZ_1K
64 * PCI
67 #define DB88F5281_PCI_SLOT0_OFFS 7
68 #define DB88F5281_PCI_SLOT0_IRQ_PIN 12
69 #define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13
71 /*****************************************************************************
72 * 512M NOR Flash on Device bus Boot CS
73 ****************************************************************************/
75 static struct physmap_flash_data db88f5281_boot_flash_data = {
76 .width = 1, /* 8 bit bus width */
79 static struct resource db88f5281_boot_flash_resource = {
80 .flags = IORESOURCE_MEM,
81 .start = DB88F5281_NOR_BOOT_BASE,
82 .end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
85 static struct platform_device db88f5281_boot_flash = {
86 .name = "physmap-flash",
87 .id = 0,
88 .dev = {
89 .platform_data = &db88f5281_boot_flash_data,
91 .num_resources = 1,
92 .resource = &db88f5281_boot_flash_resource,
95 /*****************************************************************************
96 * 32M NOR Flash on Device bus CS1
97 ****************************************************************************/
99 static struct physmap_flash_data db88f5281_nor_flash_data = {
100 .width = 4, /* 32 bit bus width */
103 static struct resource db88f5281_nor_flash_resource = {
104 .flags = IORESOURCE_MEM,
105 .start = DB88F5281_NOR_BASE,
106 .end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
109 static struct platform_device db88f5281_nor_flash = {
110 .name = "physmap-flash",
111 .id = 1,
112 .dev = {
113 .platform_data = &db88f5281_nor_flash_data,
115 .num_resources = 1,
116 .resource = &db88f5281_nor_flash_resource,
119 /*****************************************************************************
120 * 32M NAND Flash on Device bus CS2
121 ****************************************************************************/
123 static struct mtd_partition db88f5281_nand_parts[] = {
125 .name = "kernel",
126 .offset = 0,
127 .size = SZ_2M,
128 }, {
129 .name = "root",
130 .offset = SZ_2M,
131 .size = (SZ_16M - SZ_2M),
132 }, {
133 .name = "user",
134 .offset = SZ_16M,
135 .size = SZ_8M,
136 }, {
137 .name = "recovery",
138 .offset = (SZ_16M + SZ_8M),
139 .size = SZ_8M,
143 static struct resource db88f5281_nand_resource = {
144 .flags = IORESOURCE_MEM,
145 .start = DB88F5281_NAND_BASE,
146 .end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
149 static struct orion_nand_data db88f5281_nand_data = {
150 .parts = db88f5281_nand_parts,
151 .nr_parts = ARRAY_SIZE(db88f5281_nand_parts),
152 .cle = 0,
153 .ale = 1,
154 .width = 8,
157 static struct platform_device db88f5281_nand_flash = {
158 .name = "orion_nand",
159 .id = -1,
160 .dev = {
161 .platform_data = &db88f5281_nand_data,
163 .resource = &db88f5281_nand_resource,
164 .num_resources = 1,
167 /*****************************************************************************
168 * 7-Segment on Device bus CS0
169 * Dummy counter every 2 sec
170 ****************************************************************************/
172 static void __iomem *db88f5281_7seg;
173 static struct timer_list db88f5281_timer;
175 static void db88f5281_7seg_event(unsigned long data)
177 static int count = 0;
178 writel(0, db88f5281_7seg + (count << 4));
179 count = (count + 1) & 7;
180 mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
183 static int __init db88f5281_7seg_init(void)
185 if (machine_is_db88f5281()) {
186 db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
187 DB88F5281_7SEG_SIZE);
188 if (!db88f5281_7seg) {
189 printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
190 return -EIO;
192 setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
193 mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
196 return 0;
199 __initcall(db88f5281_7seg_init);
201 /*****************************************************************************
202 * PCI
203 ****************************************************************************/
205 void __init db88f5281_pci_preinit(void)
207 int pin;
210 * Configure PCI GPIO IRQ pins
212 pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
213 if (gpio_request(pin, "PCI Int1") == 0) {
214 if (gpio_direction_input(pin) == 0) {
215 irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
216 } else {
217 printk(KERN_ERR "db88f5281_pci_preinit faield to "
218 "set_irq_type pin %d\n", pin);
219 gpio_free(pin);
221 } else {
222 printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
225 pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
226 if (gpio_request(pin, "PCI Int2") == 0) {
227 if (gpio_direction_input(pin) == 0) {
228 irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
229 } else {
230 printk(KERN_ERR "db88f5281_pci_preinit faield "
231 "to set_irq_type pin %d\n", pin);
232 gpio_free(pin);
234 } else {
235 printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
239 static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
240 u8 pin)
242 int irq;
245 * Check for devices with hard-wired IRQs.
247 irq = orion5x_pci_map_irq(dev, slot, pin);
248 if (irq != -1)
249 return irq;
252 * PCI IRQs are connected via GPIOs.
254 switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
255 case 0:
256 return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
257 case 1:
258 case 2:
259 return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
260 default:
261 return -1;
265 static struct hw_pci db88f5281_pci __initdata = {
266 .nr_controllers = 2,
267 .preinit = db88f5281_pci_preinit,
268 .swizzle = pci_std_swizzle,
269 .setup = orion5x_pci_sys_setup,
270 .scan = orion5x_pci_sys_scan_bus,
271 .map_irq = db88f5281_pci_map_irq,
274 static int __init db88f5281_pci_init(void)
276 if (machine_is_db88f5281())
277 pci_common_init(&db88f5281_pci);
279 return 0;
282 subsys_initcall(db88f5281_pci_init);
284 /*****************************************************************************
285 * Ethernet
286 ****************************************************************************/
287 static struct mv643xx_eth_platform_data db88f5281_eth_data = {
288 .phy_addr = MV643XX_ETH_PHY_ADDR(8),
291 /*****************************************************************************
292 * RTC DS1339 on I2C bus
293 ****************************************************************************/
294 static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
295 I2C_BOARD_INFO("ds1339", 0x68),
298 /*****************************************************************************
299 * General Setup
300 ****************************************************************************/
301 static unsigned int db88f5281_mpp_modes[] __initdata = {
302 MPP0_GPIO, /* USB Over Current */
303 MPP1_GPIO, /* USB Vbat input */
304 MPP2_PCI_ARB, /* PCI_REQn[2] */
305 MPP3_PCI_ARB, /* PCI_GNTn[2] */
306 MPP4_PCI_ARB, /* PCI_REQn[3] */
307 MPP5_PCI_ARB, /* PCI_GNTn[3] */
308 MPP6_GPIO, /* JP0, CON17.2 */
309 MPP7_GPIO, /* JP1, CON17.1 */
310 MPP8_GPIO, /* JP2, CON11.2 */
311 MPP9_GPIO, /* JP3, CON11.3 */
312 MPP10_GPIO, /* RTC int */
313 MPP11_GPIO, /* Baud Rate Generator */
314 MPP12_GPIO, /* PCI int 1 */
315 MPP13_GPIO, /* PCI int 2 */
316 MPP14_NAND, /* NAND_REn[2] */
317 MPP15_NAND, /* NAND_WEn[2] */
318 MPP16_UART, /* UART1_RX */
319 MPP17_UART, /* UART1_TX */
320 MPP18_UART, /* UART1_CTSn */
321 MPP19_UART, /* UART1_RTSn */
325 static void __init db88f5281_init(void)
328 * Basic Orion setup. Need to be called early.
330 orion5x_init();
332 orion5x_mpp_conf(db88f5281_mpp_modes);
333 writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */
336 * Configure peripherals.
338 orion5x_ehci0_init();
339 orion5x_eth_init(&db88f5281_eth_data);
340 orion5x_i2c_init();
341 orion5x_uart0_init();
342 orion5x_uart1_init();
344 orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
345 DB88F5281_NOR_BOOT_SIZE);
346 platform_device_register(&db88f5281_boot_flash);
348 orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
350 orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
351 platform_device_register(&db88f5281_nor_flash);
353 orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
354 platform_device_register(&db88f5281_nand_flash);
356 i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
359 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
360 /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
361 .atag_offset = 0x100,
362 .init_machine = db88f5281_init,
363 .map_io = orion5x_map_io,
364 .init_early = orion5x_init_early,
365 .init_irq = orion5x_init_irq,
366 .timer = &orion5x_timer,
367 MACHINE_END