MOXA linux-2.6.x / linux-2.6.9-uc0 from sdlinux-moxaart.tgz
[linux-2.6.9-moxart.git] / drivers / parisc / wax.c
blob41d1c191a869a96431e4e3ffb759fdd4ee4aa3c1
1 /*
2 * WAX Device Driver
4 * (c) Copyright 2000 The Puffin Group Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * by Helge Deller <deller@gmx.de>
14 #include <linux/errno.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/ioport.h>
18 #include <linux/slab.h>
19 #include <linux/module.h>
20 #include <linux/types.h>
22 #include <asm/io.h>
23 #include <asm/hardware.h>
24 #include <asm/irq.h>
26 #include "gsc.h"
28 #define WAX_GSC_IRQ 7 /* Hardcoded Interrupt for GSC */
29 #define WAX_GSC_NMI_IRQ 29
31 static int wax_choose_irq(struct parisc_device *dev)
33 int irq = -1;
35 switch (dev->id.sversion) {
36 case 0x73: irq = 30; break; /* HIL */
37 case 0x8c: irq = 25; break; /* RS232 */
38 case 0x90: irq = 21; break; /* WAX EISA BA */
41 return irq;
44 static void __init
45 wax_init_irq(struct busdevice *wax)
47 unsigned long base = wax->hpa;
49 /* Stop WAX barking for a bit */
50 gsc_writel(0x00000000, base+OFFSET_IMR);
52 /* clear pending interrupts */
53 (volatile u32) gsc_readl(base+OFFSET_IRR);
55 /* We're not really convinced we want to reset the onboard
56 * devices. Firmware does it for us...
59 /* Resets */
60 // gsc_writel(0xFFFFFFFF, base+0x1000); /* HIL */
61 // gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */
63 /* Ok we hit it on the head with a hammer, our Dog is now
64 ** comatose and muzzled. Devices will now unmask WAX
65 ** interrupts as they are registered as irq's in the WAX range.
69 int __init
70 wax_init_chip(struct parisc_device *dev)
72 struct busdevice *wax;
73 struct gsc_irq gsc_irq;
74 int irq, ret;
76 wax = kmalloc(sizeof(struct busdevice), GFP_KERNEL);
77 if (!wax)
78 return -ENOMEM;
80 wax->name = "Wax";
81 wax->hpa = dev->hpa;
83 wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */
84 printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);
86 /* Stop wax hissing for a bit */
87 wax_init_irq(wax);
89 /* the IRQ wax should use */
90 irq = gsc_claim_irq(&gsc_irq, WAX_GSC_IRQ);
91 if (irq < 0) {
92 printk(KERN_ERR "%s(): cannot get GSC irq\n",
93 __FUNCTION__);
94 kfree(wax);
95 return -EBUSY;
98 ret = request_irq(gsc_irq.irq, busdev_barked, 0, "wax", wax);
99 if (ret < 0) {
100 kfree(wax);
101 return ret;
104 /* Save this for debugging later */
105 wax->parent_irq = gsc_irq.irq;
106 wax->eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
108 /* enable IRQ's for devices below WAX */
109 gsc_writel(wax->eim, wax->hpa + OFFSET_IAR);
111 /* Done init'ing, register this driver */
112 ret = gsc_common_irqsetup(dev, wax);
113 if (ret) {
114 kfree(wax);
115 return ret;
118 fixup_child_irqs(dev, wax->busdev_region->data.irqbase,
119 wax_choose_irq);
120 /* On 715-class machines, Wax EISA is a sibling of Wax, not a child. */
121 if (dev->parent->id.hw_type != HPHW_IOA) {
122 fixup_child_irqs(dev->parent, wax->busdev_region->data.irqbase,
123 wax_choose_irq);
126 return ret;
129 static struct parisc_device_id wax_tbl[] = {
130 { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008e },
131 { 0, }
134 MODULE_DEVICE_TABLE(parisc, wax_tbl);
136 struct parisc_driver wax_driver = {
137 .name = "Wax",
138 .id_table = wax_tbl,
139 .probe = wax_init_chip,