include/linux/ibmtr.h

   1 #ifndef __LINUX_IBMTR_H__
   2 #define __LINUX_IBMTR_H__
   3
   4 /* Definitions for an IBM Token Ring card. */
   5 /* This file is distributed under the GNU GPL   */
   6
   7 /* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */
   8
   9 #define TR_RETRY_INTERVAL       (30*HZ) /* 500 on PC = 5 s */
  10 #define TR_RST_TIME             (HZ/20) /* 5 on PC = 50 ms */
  11 #define TR_BUSY_INTERVAL        (HZ/5)  /* 5 on PC = 200 ms */
  12 #define TR_SPIN_INTERVAL        (3*HZ)  /* 3 seconds before init timeout */
  13
  14 #define TR_ISA 1
  15 #define TR_MCA 2
  16 #define TR_ISAPNP 3
  17 #define NOTOK 0
  18
  19 #define IBMTR_SHARED_RAM_SIZE 0x10000
  20 #define IBMTR_IO_EXTENT 4
  21 #define IBMTR_MAX_ADAPTERS 4
  22
  23 #define CHANNEL_ID      0X1F30
  24 #define AIP             0X1F00
  25 #define AIPADAPTYPE     0X1FA0
  26 #define AIPDATARATE     0X1FA2
  27 #define AIPEARLYTOKEN   0X1FA4
  28 #define AIPAVAILSHRAM   0X1FA6
  29 #define AIPSHRAMPAGE    0X1FA8
  30 #define AIP4MBDHB       0X1FAA
  31 #define AIP16MBDHB      0X1FAC
  32 #define AIPFID          0X1FBA
  33
  34 #define ADAPTRESET      0x1     /* Control Adapter reset (add to base) */
  35 #define ADAPTRESETREL   0x2     /* Release Adapter from reset ( """)  */
  36 #define ADAPTINTREL     0x3     /* Adapter interrupt release */
  37
  38 #define GLOBAL_INT_ENABLE 0x02f0
  39
  40 /* MMIO bits 0-4 select register */
  41 #define RRR_EVEN       0x00 /* Shared RAM relocation registers - even and odd */
  42 /* Used to set the starting address of shared RAM  */
  43 /* Bits 1 through 7 of this register map to bits 13 through 19 of the shared
  44    RAM address.*/
  45 /* ie: 0x02 sets RAM address to ...ato!  issy su wazzoo !! GODZILLA!!! */
  46 #define RRR_ODD         0x01
  47 /* Bits 2 and 3 of this register can be read to determine shared RAM size */
  48 /* 00 for 8k, 01 for 16k, 10 for 32k, 11 for 64k  */
  49 #define WRBR_EVEN       0x02    /* Write region base registers - even and odd */
  50 #define WRBR_ODD        0x03
  51 #define WWOR_EVEN       0x04    /* Write window open registers - even and odd */
  52 #define WWOR_ODD        0x05
  53 #define WWCR_EVEN       0x06   /* Write window close registers - even and odd */
  54 #define WWCR_ODD        0x07
  55
  56 /* Interrupt status registers - PC system  - even and odd */
  57 #define ISRP_EVEN       0x08
  58
  59 #define TCR_INT    0x10    /* Bit 4 - Timer interrupt.  The TVR_EVEN timer has
  60                                                                    expired. */
  61 #define ERR_INT    0x08    /* Bit 3 - Error interrupt.  The adapter has had an
  62                                                             internal error. */
  63 #define ACCESS_INT 0x04    /* Bit 2 - Access interrupt.  You have attempted to
  64                                       write to an invalid area of shared RAM
  65                                       or an invalid register within the MMIO. */
  66 /* In addition, the following bits within ISRP_EVEN can be turned on or off   */
  67 /* by you to control the interrupt processing:   */
  68 #define INT_ENABLE 0x40 /* Bit 6 - Interrupt enable.  If 0, no interrupts will
  69                                    occur.  If 1, interrupts will occur normally.
  70                                                          Normally set to 1.  */
  71 /* Bit 0 - Primary or alternate adapter.  Set to zero if this adapter is the
  72                 primary adapter, 1 if this adapter is the alternate adapter. */
  73
  74
  75 #define ISRP_ODD        0x09
  76
  77 #define ADAP_CHK_INT 0x40 /* Bit 6 - Adapter check.  the adapter has
  78                              encountered a serious problem and has closed
  79                              itself.  Whoa.  */
  80 #define SRB_RESP_INT 0x20 /* Bit 5 - SRB response.  The adapter has accepted
  81                              an SRB request and set the return code within
  82                              the SRB. */
  83 #define ASB_FREE_INT 0x10 /* Bit 4 - ASB free.  The adapter has read the ASB
  84                              and this area can be safely reused. This interrupt
  85                              is only used if your application has set the ASB
  86                              free request bit in ISRA_ODD or if an error was
  87                              detected in your response. */
  88 #define ARB_CMD_INT  0x08 /* Bit 3 - ARB command.  The adapter has given you a
  89                              command for action.  The command is located in the
  90                              ARB area of shared memory. */
  91 #define SSB_RESP_INT 0x04 /* Bit 2 - SSB response.  The adapter has posted a
  92                              response to your SRB (the response is located in
  93                              the SSB area of shared memory). */
  94 /* Bit 1 - Bridge frame forward complete. */
  95
  96
  97
  98 #define ISRA_EVEN 0x0A /*Interrupt status registers - adapter  - even and odd */
  99 /* Bit 7 - Internal parity error (on adapter's internal bus) */
 100 /* Bit 6 - Timer interrupt pending */
 101 /* Bit 5 - Access interrupt (attempt by adapter to access illegal address) */
 102 /* Bit 4 - Adapter microcode problem (microcode dead-man timer expired) */
 103 /* Bit 3 - Adapter processor check status */
 104 /* Bit 2 - Reserved */
 105 /* Bit 1 - Adapter hardware interrupt mask (prevents internal interrupts) */
 106 /* Bit 0 - Adapter software interrupt mask (prevents internal software ints) */
 107
 108 #define ISRA_ODD        0x0B
 109 #define CMD_IN_SRB  0x20 /* Bit 5  - Indicates that you have placed a new
 110                            command in the SRB and are ready for the adapter to
 111                            process the command. */
 112 #define RESP_IN_ASB 0x10 /* Bit 4 - Indicates that you have placed a response
 113                             (an ASB) in the shared RAM which is available for
 114                             the adapter's use. */
 115 /* Bit 3 - Indicates that you are ready to put an SRB in the shared RAM, but
 116         that a previous command is still pending.  The adapter will then
 117         interrupt you when the previous command is completed */
 118 /* Bit 2 - Indicates that you are ready to put an ASB in the shared RAM, but
 119         that a previous ASB is still pending.  The adapter will then interrupt
 120         you when the previous ASB is copied.  */
 121 #define ARB_FREE 0x2
 122 #define SSB_FREE 0x1
 123
 124 #define TCR_EVEN        0x0C    /* Timer control registers - even and odd */
 125 #define TCR_ODD         0x0D
 126 #define TVR_EVEN        0x0E    /* Timer value registers - even and odd */
 127 #define TVR_ODD         0x0F
 128 #define SRPR_EVEN       0x18    /* Shared RAM paging registers - even and odd */
 129 #define SRPR_ENABLE_PAGING 0xc0
 130 #define SRPR_ODD        0x19    /* Not used. */
 131 #define TOKREAD         0x60
 132 #define TOKOR           0x40
 133 #define TOKAND          0x20
 134 #define TOKWRITE        0x00
 135
 136 /* MMIO bits 5-6 select operation */
 137 /* 00 is used to write to a register */
 138 /* 01 is used to bitwise AND a byte with a register */
 139 /* 10 is used to bitwise OR a byte with a register  */
 140 /* 11 is used to read from a register */
 141
 142 /* MMIO bits 7-8 select area of interest.. see below */
 143 /* 00 selects attachment control area. */
 144 /* 01 is reserved. */
 145 /* 10 selects adapter identification area A containing the adapter encoded
 146         address. */
 147 /* 11 selects the adapter identification area B containing test patterns. */
 148
 149 #define PCCHANNELID 5049434F3631313039393020
 150 #define MCCHANNELID 4D4152533633583435313820
 151
 152 #define ACA_OFFSET 0x1e00
 153 #define ACA_SET 0x40
 154 #define ACA_RESET 0x20
 155 #define ACA_RW 0x00
 156
 157 #ifdef ENABLE_PAGING
 158 #define SET_PAGE(x) (writeb((x), ti->mmio + ACA_OFFSET+ ACA_RW + SRPR_EVEN))
 159 #else
 160 #define SET_PAGE(x)
 161 #endif
 162
 163 /* do_tok_int possible values */
 164 #define FIRST_INT 1
 165 #define NOT_FIRST 2
 166
 167 typedef enum {  CLOSED, OPEN } open_state;
 168 //staic const char *printstate[] = { "CLOSED","OPEN"};
 169
 170 struct tok_info {
 171         unsigned char irq;
 172         void *mmio;
 173         unsigned char hw_address[32];
 174         unsigned char adapter_type;
 175         unsigned char data_rate;
 176         unsigned char token_release;
 177         unsigned char avail_shared_ram;
 178         unsigned char shared_ram_paging;
 179         unsigned char turbo;
 180         unsigned short dhb_size4mb;
 181         unsigned short rbuf_len4;
 182         unsigned short rbuf_cnt4;
 183         unsigned short maxmtu4;
 184         unsigned short dhb_size16mb;
 185         unsigned short rbuf_len16;
 186         unsigned short rbuf_cnt16;
 187         unsigned short maxmtu16;
 188         /* Additions by David Morris       */
 189         unsigned char do_tok_int;
 190         wait_queue_head_t wait_for_reset;
 191         unsigned char sram_base;
 192         /* Additions by Peter De Schrijver */
 193         unsigned char page_mask;          /* mask to select RAM page to Map*/
 194         unsigned char mapped_ram_size;    /* size of RAM page */
 195         __u32 sram_virt;                  /* Shared memory base address */
 196         __u32 init_srb;               /* Initial System Request Block address */
 197         __u32 srb;                        /* System Request Block address */
 198         __u32 ssb;                        /* System Status Block address */
 199         __u32 arb;                        /* Adapter Request Block address */
 200         __u32 asb;                        /* Adapter Status Block address */
 201         __u8  init_srb_page;
 202         __u8  srb_page;
 203         __u8  ssb_page;
 204         __u8  arb_page;
 205         __u8  asb_page;
 206         unsigned short exsap_station_id;
 207         unsigned short global_int_enable;
 208         struct sk_buff *current_skb;
 209         struct net_device_stats tr_stats;
 210         unsigned char auto_speedsave;
 211         open_state                      open_status, sap_status;
 212         enum {MANUAL, AUTOMATIC}        open_mode;
 213         enum {FAIL, RESTART, REOPEN}    open_action;
 214         enum {NO, YES}                  open_failure;
 215         unsigned char readlog_pending;
 216         unsigned short adapter_int_enable; /* Adapter-specific int enable */
 217         struct timer_list tr_timer;
 218         unsigned char ring_speed;
 219         spinlock_t lock;                /* SMP protection */
 220 };
 221
 222 /* token ring adapter commands */
 223 #define DIR_INTERRUPT           0x00 /* struct srb_interrupt */
 224 #define DIR_MOD_OPEN_PARAMS     0x01
 225 #define DIR_OPEN_ADAPTER        0x03 /* struct dir_open_adapter */
 226 #define DIR_CLOSE_ADAPTER       0x04
 227 #define DIR_SET_GRP_ADDR        0x06
 228 #define DIR_SET_FUNC_ADDR       0x07 /* struct srb_set_funct_addr */
 229 #define DIR_READ_LOG            0x08 /* struct srb_read_log */
 230 #define DLC_OPEN_SAP            0x15 /* struct dlc_open_sap */
 231 #define DLC_CLOSE_SAP           0x16
 232 #define DATA_LOST               0x20 /* struct asb_rec */
 233 #define REC_DATA                0x81 /* struct arb_rec_req */
 234 #define XMIT_DATA_REQ           0x82 /* struct arb_xmit_req */
 235 #define DLC_STATUS              0x83 /* struct arb_dlc_status */
 236 #define RING_STAT_CHANGE        0x84 /* struct dlc_open_sap ??? */
 237
 238 /* DIR_OPEN_ADAPTER options */
 239 #define OPEN_PASS_BCON_MAC 0x0100
 240 #define NUM_RCV_BUF 2
 241 #define RCV_BUF_LEN 1024
 242 #define DHB_LENGTH 2048
 243 #define NUM_DHB 2
 244 #define DLC_MAX_SAP 2
 245 #define DLC_MAX_STA 1
 246
 247 /* DLC_OPEN_SAP options */
 248 #define MAX_I_FIELD 0x0088
 249 #define SAP_OPEN_IND_SAP 0x04
 250 #define SAP_OPEN_PRIORITY 0x20
 251 #define SAP_OPEN_STATION_CNT 0x1
 252 #define XMIT_DIR_FRAME 0x0A
 253 #define XMIT_UI_FRAME  0x0d
 254 #define XMIT_XID_CMD   0x0e
 255 #define XMIT_TEST_CMD  0x11
 256
 257 /* srb close return code */
 258 #define SIGNAL_LOSS  0x8000
 259 #define HARD_ERROR   0x4000
 260 #define XMIT_BEACON  0x1000
 261 #define LOBE_FAULT   0x0800
 262 #define AUTO_REMOVAL 0x0400
 263 #define REMOVE_RECV  0x0100
 264 #define LOG_OVERFLOW 0x0080
 265 #define RING_RECOVER 0x0020
 266
 267 struct srb_init_response {
 268         unsigned char command;
 269         unsigned char init_status;
 270         unsigned char init_status_2;
 271         unsigned char reserved[3];
 272         __u16 bring_up_code;
 273         __u16 encoded_address;
 274         __u16 level_address;
 275         __u16 adapter_address;
 276         __u16 parms_address;
 277         __u16 mac_address;
 278 };
 279
 280 struct dir_open_adapter {
 281         unsigned char command;
 282         char reserved[7];
 283         __u16 open_options;
 284         unsigned char node_address[6];
 285         unsigned char group_address[4];
 286         unsigned char funct_address[4];
 287         __u16 num_rcv_buf;
 288         __u16 rcv_buf_len;
 289         __u16 dhb_length;
 290         unsigned char num_dhb;
 291         char reserved2;
 292         unsigned char dlc_max_sap;
 293         unsigned char dlc_max_sta;
 294         unsigned char dlc_max_gsap;
 295         unsigned char dlc_max_gmem;
 296         unsigned char dlc_t1_tick_1;
 297         unsigned char dlc_t2_tick_1;
 298         unsigned char dlc_ti_tick_1;
 299         unsigned char dlc_t1_tick_2;
 300         unsigned char dlc_t2_tick_2;
 301         unsigned char dlc_ti_tick_2;
 302         unsigned char product_id[18];
 303 };
 304
 305 struct dlc_open_sap {
 306         unsigned char command;
 307         unsigned char reserved1;
 308         unsigned char ret_code;
 309         unsigned char reserved2;
 310         __u16 station_id;
 311         unsigned char timer_t1;
 312         unsigned char timer_t2;
 313         unsigned char timer_ti;
 314         unsigned char maxout;
 315         unsigned char maxin;
 316         unsigned char maxout_incr;
 317         unsigned char max_retry_count;
 318         unsigned char gsap_max_mem;
 319         __u16 max_i_field;
 320         unsigned char sap_value;
 321         unsigned char sap_options;
 322         unsigned char station_count;
 323         unsigned char sap_gsap_mem;
 324         unsigned char gsap[0];
 325 };
 326
 327 struct srb_xmit {
 328         unsigned char command;
 329         unsigned char cmd_corr;
 330         unsigned char ret_code;
 331         unsigned char reserved1;
 332         __u16 station_id;
 333 };
 334
 335 struct arb_rec_req {
 336         unsigned char command;
 337         unsigned char reserved1[3];
 338         __u16 station_id;
 339         __u16 rec_buf_addr;
 340         unsigned char lan_hdr_len;
 341         unsigned char dlc_hdr_len;
 342         __u16 frame_len;
 343         unsigned char msg_type;
 344 };
 345
 346 struct asb_rec {
 347         unsigned char command;
 348         unsigned char reserved1;
 349         unsigned char ret_code;
 350         unsigned char reserved2;
 351         __u16 station_id;
 352         __u16 rec_buf_addr;
 353 };
 354
 355 struct rec_buf {
 356         unsigned char reserved1[2];
 357         __u16 buf_ptr;
 358         unsigned char reserved2;
 359         unsigned char receive_fs;
 360         __u16 buf_len;
 361         unsigned char data[0];
 362 };
 363
 364 struct srb_set_funct_addr {
 365         unsigned char command;
 366         unsigned char reserved1;
 367         unsigned char ret_code;
 368         unsigned char reserved2[3];
 369         unsigned char funct_address[4];
 370 };
 371
 372 #endif