8 #include <linux/completion.h>
10 /* The tape buffer descriptor. */
13 unsigned char dma
; /* DMA-able buffer */
14 unsigned char do_dio
; /* direct i/o set up? */
22 Scsi_Request
*last_SRpnt
;
23 unsigned char *b_data
;
24 unsigned short use_sg
; /* zero or max number of s/g segments for this adapter */
25 unsigned short sg_segs
; /* number of segments in s/g list */
26 unsigned short orig_frp_segs
; /* number of segments allocated at first try */
27 unsigned short frp_segs
; /* number of buffer segments */
28 unsigned int frp_sg_current
; /* driver buffer length currently in s/g list */
29 struct st_buf_fragment
*frp
; /* the allocated buffer fragment list */
30 struct scatterlist sg
[1]; /* MUST BE last item */
33 /* The tape buffer fragment descriptor */
34 struct st_buf_fragment
{
39 /* The tape mode definition */
41 unsigned char defined
;
42 unsigned char sysv
; /* SYS V semantics? */
43 unsigned char do_async_writes
;
44 unsigned char do_buffer_writes
;
45 unsigned char do_read_ahead
;
46 unsigned char defaults_for_writes
;
47 unsigned char default_compression
; /* 0 = don't touch, etc */
48 short default_density
; /* Forced density, -1 = no value */
49 int default_blksize
; /* Forced blocksize, -1 = no value */
50 struct cdev
*cdevs
[2]; /* Auto-rewind and non-rewind devices */
53 /* Number of modes can be changed by changing ST_NBR_MODE_BITS. The maximum
54 number of modes is 16 (ST_NBR_MODE_BITS 4) */
55 #define ST_NBR_MODE_BITS 2
56 #define ST_NBR_MODES (1 << ST_NBR_MODE_BITS)
57 #define ST_MODE_SHIFT (7 - ST_NBR_MODE_BITS)
58 #define ST_MODE_MASK ((ST_NBR_MODES - 1) << ST_MODE_SHIFT)
60 #define ST_MAX_TAPES 128
61 #define ST_MAX_TAPE_ENTRIES (ST_MAX_TAPES << (ST_NBR_MODE_BITS + 1))
63 /* The status related to each partition */
68 unsigned char last_block_valid
;
69 u32 last_block_visited
;
70 int drv_block
; /* The block where the drive head is */
74 #define ST_NBR_PARTITIONS 4
76 /* The tape drive descriptor */
78 struct scsi_driver
*driver
;
80 struct semaphore lock
; /* For serialization */
81 struct completion wait
; /* For SCSI commands */
84 /* Drive characteristics */
85 unsigned char omit_blklims
;
86 unsigned char do_auto_lock
;
87 unsigned char can_bsr
;
88 unsigned char can_partitions
;
90 unsigned char fast_mteom
;
91 unsigned char immediate
;
92 unsigned char restr_dma
;
93 unsigned char scsi2_logical
;
94 unsigned char default_drvbuffer
; /* 0xff = don't touch, value 3 bits */
95 unsigned char cln_mode
; /* 0 = none, otherwise sense byte nbr */
96 unsigned char cln_sense_value
;
97 unsigned char cln_sense_mask
;
98 unsigned char use_pf
; /* Set Page Format bit in all mode selects? */
99 unsigned char try_dio
; /* try direct i/o? */
100 unsigned char c_algo
; /* compression algorithm */
101 unsigned char pos_unknown
; /* after reset position unknown */
103 int long_timeout
; /* timeout for commands known to take long time */
105 unsigned long max_pfn
; /* the maximum page number reachable by the HBA */
107 /* Mode characteristics */
108 ST_mode modes
[ST_NBR_MODES
];
111 /* Status variables */
114 int nbr_partitions
; /* zero until partition support enabled */
115 ST_partstat ps
[ST_NBR_PARTITIONS
];
118 unsigned char write_prot
;
119 unsigned char drv_write_prot
;
120 unsigned char in_use
;
121 unsigned char blksize_changed
;
122 unsigned char density_changed
;
123 unsigned char compression_changed
;
124 unsigned char drv_buffer
;
125 unsigned char density
;
126 unsigned char door_locked
;
127 unsigned char autorew_dev
; /* auto-rewind device */
128 unsigned char rew_at_close
; /* rewind necessary at close */
129 unsigned char inited
;
130 unsigned char cleaning_req
; /* cleaning requested? */
134 int recover_count
; /* From tape opening */
135 int recover_reg
; /* From last status call */
138 unsigned char write_pending
;
145 unsigned char last_cmnd
[6];
146 unsigned char last_sense
[16];
148 struct gendisk
*disk
;
151 /* Bit masks for use_pf */
160 #define ST_EOM_ERROR 4
164 /* EOD hit while reading => ST_EOD_1 => return zero => ST_EOD_2 =>
165 return zero => ST_EOD, return ENOSPC */
166 /* When writing: ST_EOM_OK == early warning found, write OK
167 ST_EOD_1 == allow trying new write after early warning
168 ST_EOM_ERROR == early warning found, not able to write all */
175 /* Values of ready state */
177 #define ST_NOT_READY 1
180 /* Values for door lock state */
181 #define ST_UNLOCKED 0
182 #define ST_LOCKED_EXPLICIT 1
183 #define ST_LOCKED_AUTO 2
184 #define ST_LOCK_FAILS 3
186 /* Positioning SCSI-commands for Tandberg, etc. drives */
187 #define QFA_REQUEST_BLOCK 0x02
188 #define QFA_SEEK_BLOCK 0x0c
190 /* Setting the binary options */
191 #define ST_DONT_TOUCH 0
195 #define EXTENDED_SENSE_START 18