2 * Aic94xx SAS/SATA driver SCB management.
4 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 * This file is licensed under GPLv2.
9 * This file is part of the aic94xx driver.
11 * The aic94xx driver is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; version 2 of the
16 * The aic94xx driver is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 * General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with the aic94xx driver; if not, write to the Free Software
23 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
27 #include <linux/pci.h>
28 #include <scsi/scsi_host.h>
31 #include "aic94xx_reg.h"
32 #include "aic94xx_hwi.h"
33 #include "aic94xx_seq.h"
35 #include "aic94xx_dump.h"
37 /* ---------- EMPTY SCB ---------- */
41 #define PRIMITIVE_RECVD 0x08
42 #define PHY_EVENT 0x10
43 #define LINK_RESET_ERROR 0x18
44 #define TIMER_EVENT 0x20
45 #define REQ_TASK_ABORT 0xF0
46 #define REQ_DEVICE_RESET 0xF1
47 #define SIGNAL_NCQ_ERROR 0xF2
48 #define CLEAR_NCQ_ERROR 0xF3
50 #define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE \
51 | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
54 static inline void get_lrate_mode(struct asd_phy
*phy
, u8 oob_mode
)
56 struct sas_phy
*sas_phy
= phy
->sas_phy
.phy
;
58 switch (oob_mode
& 7) {
60 /* FIXME: sas transport class doesn't have this */
61 phy
->sas_phy
.linkrate
= SAS_LINK_RATE_6_0_GBPS
;
62 phy
->sas_phy
.phy
->negotiated_linkrate
= SAS_LINK_RATE_6_0_GBPS
;
65 phy
->sas_phy
.linkrate
= SAS_LINK_RATE_3_0_GBPS
;
66 phy
->sas_phy
.phy
->negotiated_linkrate
= SAS_LINK_RATE_3_0_GBPS
;
69 phy
->sas_phy
.linkrate
= SAS_LINK_RATE_1_5_GBPS
;
70 phy
->sas_phy
.phy
->negotiated_linkrate
= SAS_LINK_RATE_1_5_GBPS
;
73 sas_phy
->negotiated_linkrate
= phy
->sas_phy
.linkrate
;
74 sas_phy
->maximum_linkrate_hw
= SAS_LINK_RATE_3_0_GBPS
;
75 sas_phy
->minimum_linkrate_hw
= SAS_LINK_RATE_1_5_GBPS
;
76 sas_phy
->maximum_linkrate
= phy
->phy_desc
->max_sas_lrate
;
77 sas_phy
->minimum_linkrate
= phy
->phy_desc
->min_sas_lrate
;
79 if (oob_mode
& SAS_MODE
)
80 phy
->sas_phy
.oob_mode
= SAS_OOB_MODE
;
81 else if (oob_mode
& SATA_MODE
)
82 phy
->sas_phy
.oob_mode
= SATA_OOB_MODE
;
85 static inline void asd_phy_event_tasklet(struct asd_ascb
*ascb
,
86 struct done_list_struct
*dl
)
88 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
89 struct sas_ha_struct
*sas_ha
= &asd_ha
->sas_ha
;
90 int phy_id
= dl
->status_block
[0] & DL_PHY_MASK
;
91 struct asd_phy
*phy
= &asd_ha
->phys
[phy_id
];
93 u8 oob_status
= dl
->status_block
[1] & PHY_EVENTS_STATUS
;
94 u8 oob_mode
= dl
->status_block
[2];
97 case CURRENT_LOSS_OF_SIGNAL
:
98 /* directly attached device was removed */
99 ASD_DPRINTK("phy%d: device unplugged\n", phy_id
);
100 asd_turn_led(asd_ha
, phy_id
, 0);
101 sas_phy_disconnected(&phy
->sas_phy
);
102 sas_ha
->notify_phy_event(&phy
->sas_phy
, PHYE_LOSS_OF_SIGNAL
);
104 case CURRENT_OOB_DONE
:
105 /* hot plugged device */
106 asd_turn_led(asd_ha
, phy_id
, 1);
107 get_lrate_mode(phy
, oob_mode
);
108 ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
109 phy_id
, phy
->sas_phy
.linkrate
, phy
->sas_phy
.iproto
);
110 sas_ha
->notify_phy_event(&phy
->sas_phy
, PHYE_OOB_DONE
);
112 case CURRENT_SPINUP_HOLD
:
113 /* hot plug SATA, no COMWAKE sent */
114 asd_turn_led(asd_ha
, phy_id
, 1);
115 sas_ha
->notify_phy_event(&phy
->sas_phy
, PHYE_SPINUP_HOLD
);
117 case CURRENT_GTO_TIMEOUT
:
118 case CURRENT_OOB_ERROR
:
119 ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id
,
120 dl
->status_block
[1]);
121 asd_turn_led(asd_ha
, phy_id
, 0);
122 sas_phy_disconnected(&phy
->sas_phy
);
123 sas_ha
->notify_phy_event(&phy
->sas_phy
, PHYE_OOB_ERROR
);
128 /* If phys are enabled sparsely, this will do the right thing. */
129 static inline unsigned ord_phy(struct asd_ha_struct
*asd_ha
,
132 u8 enabled_mask
= asd_ha
->hw_prof
.enabled_phys
;
135 for_each_phy(enabled_mask
, enabled_mask
, i
) {
136 if (&asd_ha
->phys
[i
] == phy
)
144 * asd_get_attached_sas_addr -- extract/generate attached SAS address
145 * phy: pointer to asd_phy
146 * sas_addr: pointer to buffer where the SAS address is to be written
148 * This function extracts the SAS address from an IDENTIFY frame
149 * received. If OOB is SATA, then a SAS address is generated from the
152 * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
155 static inline void asd_get_attached_sas_addr(struct asd_phy
*phy
, u8
*sas_addr
)
157 if (phy
->sas_phy
.frame_rcvd
[0] == 0x34
158 && phy
->sas_phy
.oob_mode
== SATA_OOB_MODE
) {
159 struct asd_ha_struct
*asd_ha
= phy
->sas_phy
.ha
->lldd_ha
;
160 /* FIS device-to-host */
161 u64 addr
= be64_to_cpu(*(__be64
*)phy
->phy_desc
->sas_addr
);
163 addr
+= asd_ha
->hw_prof
.sata_name_base
+ ord_phy(asd_ha
, phy
);
164 *(__be64
*)sas_addr
= cpu_to_be64(addr
);
166 struct sas_identify_frame
*idframe
=
167 (void *) phy
->sas_phy
.frame_rcvd
;
168 memcpy(sas_addr
, idframe
->sas_addr
, SAS_ADDR_SIZE
);
172 static void asd_form_port(struct asd_ha_struct
*asd_ha
, struct asd_phy
*phy
)
175 struct asd_port
*free_port
= NULL
;
176 struct asd_port
*port
;
177 struct asd_sas_phy
*sas_phy
= &phy
->sas_phy
;
180 spin_lock_irqsave(&asd_ha
->asd_ports_lock
, flags
);
181 if (!phy
->asd_port
) {
182 for (i
= 0; i
< ASD_MAX_PHYS
; i
++) {
183 port
= &asd_ha
->asd_ports
[i
];
185 /* Check for wide port */
186 if (port
->num_phys
> 0 &&
187 memcmp(port
->sas_addr
, sas_phy
->sas_addr
,
188 SAS_ADDR_SIZE
) == 0 &&
189 memcmp(port
->attached_sas_addr
,
190 sas_phy
->attached_sas_addr
,
191 SAS_ADDR_SIZE
) == 0) {
195 /* Find a free port */
196 if (port
->num_phys
== 0 && free_port
== NULL
) {
201 /* Use a free port if this doesn't form a wide port */
202 if (i
>= ASD_MAX_PHYS
) {
205 memcpy(port
->sas_addr
, sas_phy
->sas_addr
,
207 memcpy(port
->attached_sas_addr
,
208 sas_phy
->attached_sas_addr
,
212 port
->phy_mask
|= (1U << sas_phy
->id
);
213 phy
->asd_port
= port
;
215 ASD_DPRINTK("%s: updating phy_mask 0x%x for phy%d\n",
216 __FUNCTION__
, phy
->asd_port
->phy_mask
, sas_phy
->id
);
217 asd_update_port_links(asd_ha
, phy
);
218 spin_unlock_irqrestore(&asd_ha
->asd_ports_lock
, flags
);
221 static void asd_deform_port(struct asd_ha_struct
*asd_ha
, struct asd_phy
*phy
)
223 struct asd_port
*port
= phy
->asd_port
;
224 struct asd_sas_phy
*sas_phy
= &phy
->sas_phy
;
227 spin_lock_irqsave(&asd_ha
->asd_ports_lock
, flags
);
230 port
->phy_mask
&= ~(1U << sas_phy
->id
);
231 phy
->asd_port
= NULL
;
233 spin_unlock_irqrestore(&asd_ha
->asd_ports_lock
, flags
);
236 static inline void asd_bytes_dmaed_tasklet(struct asd_ascb
*ascb
,
237 struct done_list_struct
*dl
,
238 int edb_id
, int phy_id
)
241 int edb_el
= edb_id
+ ascb
->edb_index
;
242 struct asd_dma_tok
*edb
= ascb
->ha
->seq
.edb_arr
[edb_el
];
243 struct asd_phy
*phy
= &ascb
->ha
->phys
[phy_id
];
244 struct sas_ha_struct
*sas_ha
= phy
->sas_phy
.ha
;
245 u16 size
= ((dl
->status_block
[3] & 7) << 8) | dl
->status_block
[2];
247 size
= min(size
, (u16
) sizeof(phy
->frame_rcvd
));
249 spin_lock_irqsave(&phy
->sas_phy
.frame_rcvd_lock
, flags
);
250 memcpy(phy
->sas_phy
.frame_rcvd
, edb
->vaddr
, size
);
251 phy
->sas_phy
.frame_rcvd_size
= size
;
252 asd_get_attached_sas_addr(phy
, phy
->sas_phy
.attached_sas_addr
);
253 spin_unlock_irqrestore(&phy
->sas_phy
.frame_rcvd_lock
, flags
);
254 asd_dump_frame_rcvd(phy
, dl
);
255 asd_form_port(ascb
->ha
, phy
);
256 sas_ha
->notify_port_event(&phy
->sas_phy
, PORTE_BYTES_DMAED
);
259 static inline void asd_link_reset_err_tasklet(struct asd_ascb
*ascb
,
260 struct done_list_struct
*dl
,
263 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
264 struct sas_ha_struct
*sas_ha
= &asd_ha
->sas_ha
;
265 struct asd_sas_phy
*sas_phy
= sas_ha
->sas_phy
[phy_id
];
266 struct asd_phy
*phy
= &asd_ha
->phys
[phy_id
];
267 u8 lr_error
= dl
->status_block
[1];
268 u8 retries_left
= dl
->status_block
[2];
272 ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id
);
275 ASD_DPRINTK("phy%d: Loss of signal\n", phy_id
);
278 ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id
);
281 ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id
);
284 ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n",
289 asd_turn_led(asd_ha
, phy_id
, 0);
290 sas_phy_disconnected(sas_phy
);
291 asd_deform_port(asd_ha
, phy
);
292 sas_ha
->notify_port_event(sas_phy
, PORTE_LINK_RESET_ERR
);
294 if (retries_left
== 0) {
296 struct asd_ascb
*cp
= asd_ascb_alloc_list(ascb
->ha
, &num
,
299 asd_printk("%s: out of memory\n", __FUNCTION__
);
302 ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
304 asd_build_control_phy(cp
, phy_id
, ENABLE_PHY
);
305 if (asd_post_ascb_list(ascb
->ha
, cp
, 1) != 0)
312 static inline void asd_primitive_rcvd_tasklet(struct asd_ascb
*ascb
,
313 struct done_list_struct
*dl
,
317 struct sas_ha_struct
*sas_ha
= &ascb
->ha
->sas_ha
;
318 struct asd_sas_phy
*sas_phy
= sas_ha
->sas_phy
[phy_id
];
319 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
320 struct asd_phy
*phy
= &asd_ha
->phys
[phy_id
];
321 u8 reg
= dl
->status_block
[1];
322 u32 cont
= dl
->status_block
[2] << ((reg
& 3)*8);
326 case LmPRMSTAT0BYTE0
:
332 ASD_DPRINTK("phy%d: BROADCAST change received:%d\n",
334 spin_lock_irqsave(&sas_phy
->sas_prim_lock
, flags
);
335 sas_phy
->sas_prim
= ffs(cont
);
336 spin_unlock_irqrestore(&sas_phy
->sas_prim_lock
, flags
);
337 sas_ha
->notify_port_event(sas_phy
,PORTE_BROADCAST_RCVD
);
341 ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id
);
345 ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
350 case LmPRMSTAT1BYTE0
:
353 ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n",
355 /* The sequencer disables all phys on that port.
356 * We have to re-enable the phys ourselves. */
357 asd_deform_port(asd_ha
, phy
);
358 sas_ha
->notify_port_event(sas_phy
, PORTE_HARD_RESET
);
362 ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
368 ASD_DPRINTK("unknown primitive register:0x%x\n",
369 dl
->status_block
[1]);
375 * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB
376 * @ascb: pointer to Empty SCB
377 * @edb_id: index [0,6] to the empty data buffer which is to be invalidated
379 * After an EDB has been invalidated, if all EDBs in this ESCB have been
380 * invalidated, the ESCB is posted back to the sequencer.
381 * Context is tasklet/IRQ.
383 void asd_invalidate_edb(struct asd_ascb
*ascb
, int edb_id
)
385 struct asd_seq_data
*seq
= &ascb
->ha
->seq
;
386 struct empty_scb
*escb
= &ascb
->scb
->escb
;
387 struct sg_el
*eb
= &escb
->eb
[edb_id
];
388 struct asd_dma_tok
*edb
= seq
->edb_arr
[ascb
->edb_index
+ edb_id
];
390 memset(edb
->vaddr
, 0, ASD_EDB_SIZE
);
391 eb
->flags
|= ELEMENT_NOT_VALID
;
394 if (escb
->num_valid
== 0) {
396 /* ASD_DPRINTK("reposting escb: vaddr: 0x%p, "
397 "dma_handle: 0x%08llx, next: 0x%08llx, "
398 "index:%d, opcode:0x%02x\n",
400 (u64)ascb->dma_scb.dma_handle,
401 le64_to_cpu(ascb->scb->header.next_scb),
402 le16_to_cpu(ascb->scb->header.index),
403 ascb->scb->header.opcode);
405 escb
->num_valid
= ASD_EDBS_PER_SCB
;
406 for (i
= 0; i
< ASD_EDBS_PER_SCB
; i
++)
407 escb
->eb
[i
].flags
= 0;
408 if (!list_empty(&ascb
->list
))
409 list_del_init(&ascb
->list
);
410 i
= asd_post_escb_list(ascb
->ha
, ascb
, 1);
412 asd_printk("couldn't post escb, err:%d\n", i
);
416 static void escb_tasklet_complete(struct asd_ascb
*ascb
,
417 struct done_list_struct
*dl
)
419 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
420 struct sas_ha_struct
*sas_ha
= &asd_ha
->sas_ha
;
421 int edb
= (dl
->opcode
& DL_PHY_MASK
) - 1; /* [0xc1,0xc7] -> [0,6] */
422 u8 sb_opcode
= dl
->status_block
[0];
423 int phy_id
= sb_opcode
& DL_PHY_MASK
;
424 struct asd_sas_phy
*sas_phy
= sas_ha
->sas_phy
[phy_id
];
425 struct asd_phy
*phy
= &asd_ha
->phys
[phy_id
];
427 if (edb
> 6 || edb
< 0) {
428 ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
430 ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
432 ASD_DPRINTK("escb: vaddr: 0x%p, "
433 "dma_handle: 0x%llx, next: 0x%llx, "
434 "index:%d, opcode:0x%02x\n",
436 (unsigned long long)ascb
->dma_scb
.dma_handle
,
438 le64_to_cpu(ascb
->scb
->header
.next_scb
),
439 le16_to_cpu(ascb
->scb
->header
.index
),
440 ascb
->scb
->header
.opcode
);
443 /* Catch these before we mask off the sb_opcode bits */
445 case REQ_TASK_ABORT
: {
446 struct asd_ascb
*a
, *b
;
448 struct domain_device
*failed_dev
= NULL
;
450 ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n",
451 __FUNCTION__
, dl
->status_block
[3]);
454 * Find the task that caused the abort and abort it first.
455 * The sequencer won't put anything on the done list until
458 tc_abort
= *((u16
*)(&dl
->status_block
[1]));
459 tc_abort
= le16_to_cpu(tc_abort
);
461 list_for_each_entry_safe(a
, b
, &asd_ha
->seq
.pend_q
, list
) {
462 struct sas_task
*task
= ascb
->uldd_task
;
464 if (task
&& a
->tc_index
== tc_abort
) {
465 failed_dev
= task
->dev
;
466 sas_task_abort(task
);
472 ASD_DPRINTK("%s: Can't find task (tc=%d) to abort!\n",
473 __FUNCTION__
, tc_abort
);
478 * Now abort everything else for that device (hba?) so
479 * that the EH will wake up and do something.
481 list_for_each_entry_safe(a
, b
, &asd_ha
->seq
.pend_q
, list
) {
482 struct sas_task
*task
= ascb
->uldd_task
;
485 task
->dev
== failed_dev
&&
486 a
->tc_index
!= tc_abort
)
487 sas_task_abort(task
);
492 case REQ_DEVICE_RESET
: {
496 struct sas_task
*last_dev_task
= NULL
;
498 conn_handle
= *((u16
*)(&dl
->status_block
[1]));
499 conn_handle
= le16_to_cpu(conn_handle
);
501 ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __FUNCTION__
,
502 dl
->status_block
[3]);
504 /* Find the last pending task for the device... */
505 list_for_each_entry(a
, &asd_ha
->seq
.pend_q
, list
) {
507 struct domain_device
*dev
;
508 struct sas_task
*task
= a
->uldd_task
;
514 x
= (unsigned long)dev
->lldd_dev
;
515 if (x
== conn_handle
)
516 last_dev_task
= task
;
519 if (!last_dev_task
) {
520 ASD_DPRINTK("%s: Device reset for idle device %d?\n",
521 __FUNCTION__
, conn_handle
);
525 /* ...and set the reset flag */
526 spin_lock_irqsave(&last_dev_task
->task_state_lock
, flags
);
527 last_dev_task
->task_state_flags
|= SAS_TASK_NEED_DEV_RESET
;
528 spin_unlock_irqrestore(&last_dev_task
->task_state_lock
, flags
);
530 /* Kill all pending tasks for the device */
531 list_for_each_entry(a
, &asd_ha
->seq
.pend_q
, list
) {
533 struct domain_device
*dev
;
534 struct sas_task
*task
= a
->uldd_task
;
540 x
= (unsigned long)dev
->lldd_dev
;
541 if (x
== conn_handle
)
542 sas_task_abort(task
);
547 case SIGNAL_NCQ_ERROR
:
548 ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __FUNCTION__
);
550 case CLEAR_NCQ_ERROR
:
551 ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __FUNCTION__
);
555 sb_opcode
&= ~DL_PHY_MASK
;
559 ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__
, phy_id
);
560 asd_bytes_dmaed_tasklet(ascb
, dl
, edb
, phy_id
);
562 case PRIMITIVE_RECVD
:
563 ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__
,
565 asd_primitive_rcvd_tasklet(ascb
, dl
, phy_id
);
568 ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__
, phy_id
);
569 asd_phy_event_tasklet(ascb
, dl
);
571 case LINK_RESET_ERROR
:
572 ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__
,
574 asd_link_reset_err_tasklet(ascb
, dl
, phy_id
);
577 ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
578 __FUNCTION__
, phy_id
);
579 asd_turn_led(asd_ha
, phy_id
, 0);
580 /* the device is gone */
581 sas_phy_disconnected(sas_phy
);
582 asd_deform_port(asd_ha
, phy
);
583 sas_ha
->notify_port_event(sas_phy
, PORTE_TIMER_EVENT
);
586 ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__
,
588 ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
590 ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
592 ASD_DPRINTK("escb: vaddr: 0x%p, "
593 "dma_handle: 0x%llx, next: 0x%llx, "
594 "index:%d, opcode:0x%02x\n",
596 (unsigned long long)ascb
->dma_scb
.dma_handle
,
598 le64_to_cpu(ascb
->scb
->header
.next_scb
),
599 le16_to_cpu(ascb
->scb
->header
.index
),
600 ascb
->scb
->header
.opcode
);
605 asd_invalidate_edb(ascb
, edb
);
608 int asd_init_post_escbs(struct asd_ha_struct
*asd_ha
)
610 struct asd_seq_data
*seq
= &asd_ha
->seq
;
613 for (i
= 0; i
< seq
->num_escbs
; i
++)
614 seq
->escb_arr
[i
]->tasklet_complete
= escb_tasklet_complete
;
616 ASD_DPRINTK("posting %d escbs\n", i
);
617 return asd_post_escb_list(asd_ha
, seq
->escb_arr
[0], seq
->num_escbs
);
620 /* ---------- CONTROL PHY ---------- */
622 #define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE \
623 | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
627 * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb
628 * @ascb: pointer to an ascb
629 * @dl: pointer to the done list entry
631 * This function completes a CONTROL PHY scb and frees the ascb.
633 * - an LED blinks if there is IO though it,
634 * - if a device is connected to the LED, it is lit,
635 * - if no device is connected to the LED, is is dimmed (off).
637 static void control_phy_tasklet_complete(struct asd_ascb
*ascb
,
638 struct done_list_struct
*dl
)
640 struct asd_ha_struct
*asd_ha
= ascb
->ha
;
641 struct scb
*scb
= ascb
->scb
;
642 struct control_phy
*control_phy
= &scb
->control_phy
;
643 u8 phy_id
= control_phy
->phy_id
;
644 struct asd_phy
*phy
= &ascb
->ha
->phys
[phy_id
];
646 u8 status
= dl
->status_block
[0];
647 u8 oob_status
= dl
->status_block
[1];
648 u8 oob_mode
= dl
->status_block
[2];
649 /* u8 oob_signals= dl->status_block[3]; */
652 ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
653 __FUNCTION__
, phy_id
, status
);
657 switch (control_phy
->sub_func
) {
659 asd_ha
->hw_prof
.enabled_phys
&= ~(1 << phy_id
);
660 asd_turn_led(asd_ha
, phy_id
, 0);
661 asd_control_led(asd_ha
, phy_id
, 0);
662 ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__
, phy_id
);
666 asd_control_led(asd_ha
, phy_id
, 1);
667 if (oob_status
& CURRENT_OOB_DONE
) {
668 asd_ha
->hw_prof
.enabled_phys
|= (1 << phy_id
);
669 get_lrate_mode(phy
, oob_mode
);
670 asd_turn_led(asd_ha
, phy_id
, 1);
671 ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
672 __FUNCTION__
, phy_id
,phy
->sas_phy
.linkrate
,
673 phy
->sas_phy
.iproto
);
674 } else if (oob_status
& CURRENT_SPINUP_HOLD
) {
675 asd_ha
->hw_prof
.enabled_phys
|= (1 << phy_id
);
676 asd_turn_led(asd_ha
, phy_id
, 1);
677 ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__
,
679 } else if (oob_status
& CURRENT_ERR_MASK
) {
680 asd_turn_led(asd_ha
, phy_id
, 0);
681 ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
682 __FUNCTION__
, phy_id
, oob_status
);
683 } else if (oob_status
& (CURRENT_HOT_PLUG_CNCT
684 | CURRENT_DEVICE_PRESENT
)) {
685 asd_ha
->hw_prof
.enabled_phys
|= (1 << phy_id
);
686 asd_turn_led(asd_ha
, phy_id
, 1);
687 ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
688 __FUNCTION__
, phy_id
);
690 asd_ha
->hw_prof
.enabled_phys
|= (1 << phy_id
);
691 asd_turn_led(asd_ha
, phy_id
, 0);
692 ASD_DPRINTK("%s: phy%d: no device present: "
694 __FUNCTION__
, phy_id
, oob_status
);
697 case RELEASE_SPINUP_HOLD
:
699 case EXECUTE_HARD_RESET
:
700 ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__
,
701 phy_id
, control_phy
->sub_func
);
705 ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__
,
706 phy_id
, control_phy
->sub_func
);
713 static inline void set_speed_mask(u8
*speed_mask
, struct asd_phy_desc
*pd
)
715 /* disable all speeds, then enable defaults */
716 *speed_mask
= SAS_SPEED_60_DIS
| SAS_SPEED_30_DIS
| SAS_SPEED_15_DIS
717 | SATA_SPEED_30_DIS
| SATA_SPEED_15_DIS
;
719 switch (pd
->max_sas_lrate
) {
720 case SAS_LINK_RATE_6_0_GBPS
:
721 *speed_mask
&= ~SAS_SPEED_60_DIS
;
723 case SAS_LINK_RATE_3_0_GBPS
:
724 *speed_mask
&= ~SAS_SPEED_30_DIS
;
725 case SAS_LINK_RATE_1_5_GBPS
:
726 *speed_mask
&= ~SAS_SPEED_15_DIS
;
729 switch (pd
->min_sas_lrate
) {
730 case SAS_LINK_RATE_6_0_GBPS
:
731 *speed_mask
|= SAS_SPEED_30_DIS
;
732 case SAS_LINK_RATE_3_0_GBPS
:
733 *speed_mask
|= SAS_SPEED_15_DIS
;
735 case SAS_LINK_RATE_1_5_GBPS
:
740 switch (pd
->max_sata_lrate
) {
741 case SAS_LINK_RATE_3_0_GBPS
:
742 *speed_mask
&= ~SATA_SPEED_30_DIS
;
744 case SAS_LINK_RATE_1_5_GBPS
:
745 *speed_mask
&= ~SATA_SPEED_15_DIS
;
748 switch (pd
->min_sata_lrate
) {
749 case SAS_LINK_RATE_3_0_GBPS
:
750 *speed_mask
|= SATA_SPEED_15_DIS
;
752 case SAS_LINK_RATE_1_5_GBPS
:
759 * asd_build_control_phy -- build a CONTROL PHY SCB
760 * @ascb: pointer to an ascb
761 * @phy_id: phy id to control, integer
762 * @subfunc: subfunction, what to actually to do the phy
764 * This function builds a CONTROL PHY scb. No allocation of any kind
765 * is performed. @ascb is allocated with the list function.
766 * The caller can override the ascb->tasklet_complete to point
767 * to its own callback function. It must call asd_ascb_free()
768 * at its tasklet complete function.
769 * See the default implementation.
771 void asd_build_control_phy(struct asd_ascb
*ascb
, int phy_id
, u8 subfunc
)
773 struct asd_phy
*phy
= &ascb
->ha
->phys
[phy_id
];
774 struct scb
*scb
= ascb
->scb
;
775 struct control_phy
*control_phy
= &scb
->control_phy
;
777 scb
->header
.opcode
= CONTROL_PHY
;
778 control_phy
->phy_id
= (u8
) phy_id
;
779 control_phy
->sub_func
= subfunc
;
782 case EXECUTE_HARD_RESET
: /* 0x81 */
783 case ENABLE_PHY
: /* 0x01 */
784 /* decide hot plug delay */
785 control_phy
->hot_plug_delay
= HOTPLUG_DELAY_TIMEOUT
;
787 /* decide speed mask */
788 set_speed_mask(&control_phy
->speed_mask
, phy
->phy_desc
);
790 /* initiator port settings are in the hi nibble */
791 if (phy
->sas_phy
.role
== PHY_ROLE_INITIATOR
)
792 control_phy
->port_type
= SAS_PROTO_ALL
<< 4;
793 else if (phy
->sas_phy
.role
== PHY_ROLE_TARGET
)
794 control_phy
->port_type
= SAS_PROTO_ALL
;
796 control_phy
->port_type
=
797 (SAS_PROTO_ALL
<< 4) | SAS_PROTO_ALL
;
799 /* link reset retries, this should be nominal */
800 control_phy
->link_reset_retries
= 10;
802 case RELEASE_SPINUP_HOLD
: /* 0x02 */
803 /* decide the func_mask */
804 control_phy
->func_mask
= FUNCTION_MASK_DEFAULT
;
805 if (phy
->phy_desc
->flags
& ASD_SATA_SPINUP_HOLD
)
806 control_phy
->func_mask
&= ~SPINUP_HOLD_DIS
;
808 control_phy
->func_mask
|= SPINUP_HOLD_DIS
;
811 control_phy
->conn_handle
= cpu_to_le16(0xFFFF);
813 ascb
->tasklet_complete
= control_phy_tasklet_complete
;
816 /* ---------- INITIATE LINK ADM TASK ---------- */
818 static void link_adm_tasklet_complete(struct asd_ascb
*ascb
,
819 struct done_list_struct
*dl
)
821 u8 opcode
= dl
->opcode
;
822 struct initiate_link_adm
*link_adm
= &ascb
->scb
->link_adm
;
823 u8 phy_id
= link_adm
->phy_id
;
825 if (opcode
!= TC_NO_ERROR
) {
826 asd_printk("phy%d: link adm task 0x%x completed with error "
827 "0x%x\n", phy_id
, link_adm
->sub_func
, opcode
);
829 ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n",
830 phy_id
, link_adm
->sub_func
, opcode
);
835 void asd_build_initiate_link_adm_task(struct asd_ascb
*ascb
, int phy_id
,
838 struct scb
*scb
= ascb
->scb
;
839 struct initiate_link_adm
*link_adm
= &scb
->link_adm
;
841 scb
->header
.opcode
= INITIATE_LINK_ADM_TASK
;
843 link_adm
->phy_id
= phy_id
;
844 link_adm
->sub_func
= subfunc
;
845 link_adm
->conn_handle
= cpu_to_le16(0xFFFF);
847 ascb
->tasklet_complete
= link_adm_tasklet_complete
;
850 /* ---------- SCB timer ---------- */
853 * asd_ascb_timedout -- called when a pending SCB's timer has expired
854 * @data: unsigned long, a pointer to the ascb in question
856 * This is the default timeout function which does the most necessary.
857 * Upper layers can implement their own timeout function, say to free
858 * resources they have with this SCB, and then call this one at the
859 * end of their timeout function. To do this, one should initialize
860 * the ascb->timer.{function, data, expires} prior to calling the post
861 * funcion. The timer is started by the post function.
863 void asd_ascb_timedout(unsigned long data
)
865 struct asd_ascb
*ascb
= (void *) data
;
866 struct asd_seq_data
*seq
= &ascb
->ha
->seq
;
869 ASD_DPRINTK("scb:0x%x timed out\n", ascb
->scb
->header
.opcode
);
871 spin_lock_irqsave(&seq
->pend_q_lock
, flags
);
873 list_del_init(&ascb
->list
);
874 spin_unlock_irqrestore(&seq
->pend_q_lock
, flags
);
879 /* ---------- CONTROL PHY ---------- */
881 /* Given the spec value, return a driver value. */
882 static const int phy_func_table
[] = {
883 [PHY_FUNC_NOP
] = PHY_NO_OP
,
884 [PHY_FUNC_LINK_RESET
] = ENABLE_PHY
,
885 [PHY_FUNC_HARD_RESET
] = EXECUTE_HARD_RESET
,
886 [PHY_FUNC_DISABLE
] = DISABLE_PHY
,
887 [PHY_FUNC_RELEASE_SPINUP_HOLD
] = RELEASE_SPINUP_HOLD
,
890 int asd_control_phy(struct asd_sas_phy
*phy
, enum phy_func func
, void *arg
)
892 struct asd_ha_struct
*asd_ha
= phy
->ha
->lldd_ha
;
893 struct asd_phy_desc
*pd
= asd_ha
->phys
[phy
->id
].phy_desc
;
894 struct asd_ascb
*ascb
;
895 struct sas_phy_linkrates
*rates
;
899 case PHY_FUNC_CLEAR_ERROR_LOG
:
901 case PHY_FUNC_SET_LINK_RATE
:
903 if (rates
->minimum_linkrate
) {
904 pd
->min_sas_lrate
= rates
->minimum_linkrate
;
905 pd
->min_sata_lrate
= rates
->minimum_linkrate
;
907 if (rates
->maximum_linkrate
) {
908 pd
->max_sas_lrate
= rates
->maximum_linkrate
;
909 pd
->max_sata_lrate
= rates
->maximum_linkrate
;
911 func
= PHY_FUNC_LINK_RESET
;
917 ascb
= asd_ascb_alloc_list(asd_ha
, &res
, GFP_KERNEL
);
921 asd_build_control_phy(ascb
, phy
->id
, phy_func_table
[func
]);
922 res
= asd_post_ascb_list(asd_ha
, ascb
, 1);