?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[POWERPC] Make soft_enabled irqs preempt safe
[linux-2.6.22.y-op.git] / drivers / pci / probe.c
blob0eeac60042b347052a0dc9d380d9d74de256735c
1 /*
2 * probe.c - PCI detection and setup code
3 */
4
5 #include <linux/kernel.h>
6 #include <linux/delay.h>
7 #include <linux/init.h>
8 #include <linux/pci.h>
9 #include <linux/slab.h>
10 #include <linux/module.h>
11 #include <linux/cpumask.h>
12 #include "pci.h"
13
14 #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
15 #define CARDBUS_RESERVE_BUSNR 3
16 #define PCI_CFG_SPACE_SIZE 256
17 #define PCI_CFG_SPACE_EXP_SIZE 4096
18
19 /* Ugh. Need to stop exporting this to modules. */
20 LIST_HEAD(pci_root_buses);
21 EXPORT_SYMBOL(pci_root_buses);
22
23 LIST_HEAD(pci_devices);
24
25 #ifdef HAVE_PCI_LEGACY
26 /**
27 * pci_create_legacy_files - create legacy I/O port and memory files
28 * @b: bus to create files under
29 *
30 * Some platforms allow access to legacy I/O port and ISA memory space on
31 * a per-bus basis. This routine creates the files and ties them into
32 * their associated read, write and mmap files from pci-sysfs.c
33 */
34 static void pci_create_legacy_files(struct pci_bus *b)
35 {
36 b->legacy_io = kzalloc(sizeof(struct bin_attribute) * 2,
37 GFP_ATOMIC);
38 if (b->legacy_io) {
39 b->legacy_io->attr.name = "legacy_io";
40 b->legacy_io->size = 0xffff;
41 b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
42 b->legacy_io->attr.owner = THIS_MODULE;
43 b->legacy_io->read = pci_read_legacy_io;
44 b->legacy_io->write = pci_write_legacy_io;
45 class_device_create_bin_file(&b->class_dev, b->legacy_io);
46
47 /* Allocated above after the legacy_io struct */
48 b->legacy_mem = b->legacy_io + 1;
49 b->legacy_mem->attr.name = "legacy_mem";
50 b->legacy_mem->size = 1024*1024;
51 b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
52 b->legacy_mem->attr.owner = THIS_MODULE;
53 b->legacy_mem->mmap = pci_mmap_legacy_mem;
54 class_device_create_bin_file(&b->class_dev, b->legacy_mem);
55 }
56 }
57
58 void pci_remove_legacy_files(struct pci_bus *b)
59 {
60 if (b->legacy_io) {
61 class_device_remove_bin_file(&b->class_dev, b->legacy_io);
62 class_device_remove_bin_file(&b->class_dev, b->legacy_mem);
63 kfree(b->legacy_io); /* both are allocated here */
64 }
65 }
66 #else /* !HAVE_PCI_LEGACY */
67 static inline void pci_create_legacy_files(struct pci_bus *bus) { return; }
68 void pci_remove_legacy_files(struct pci_bus *bus) { return; }
69 #endif /* HAVE_PCI_LEGACY */
70
71 /*
72 * PCI Bus Class Devices
73 */
74 static ssize_t pci_bus_show_cpuaffinity(struct class_device *class_dev,
75 char *buf)
76 {
77 int ret;
78 cpumask_t cpumask;
79
80 cpumask = pcibus_to_cpumask(to_pci_bus(class_dev));
81 ret = cpumask_scnprintf(buf, PAGE_SIZE, cpumask);
82 if (ret < PAGE_SIZE)
83 buf[ret++] = '\n';
84 return ret;
85 }
86 CLASS_DEVICE_ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpuaffinity, NULL);
87
88 /*
89 * PCI Bus Class
90 */
91 static void release_pcibus_dev(struct class_device *class_dev)
92 {
93 struct pci_bus *pci_bus = to_pci_bus(class_dev);
94
95 if (pci_bus->bridge)
96 put_device(pci_bus->bridge);
97 kfree(pci_bus);
98 }
99
100 static struct class pcibus_class = {
101 .name = "pci_bus",
102 .release = &release_pcibus_dev,
103 };
104
105 static int __init pcibus_class_init(void)
106 {
107 return class_register(&pcibus_class);
108 }
109 postcore_initcall(pcibus_class_init);
110
111 /*
112 * Translate the low bits of the PCI base
113 * to the resource type
114 */
115 static inline unsigned int pci_calc_resource_flags(unsigned int flags)
116 {
117 if (flags & PCI_BASE_ADDRESS_SPACE_IO)
118 return IORESOURCE_IO;
119
120 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
121 return IORESOURCE_MEM | IORESOURCE_PREFETCH;
122
123 return IORESOURCE_MEM;
124 }
125
126 /*
127 * Find the extent of a PCI decode..
128 */
129 static u32 pci_size(u32 base, u32 maxbase, u32 mask)
130 {
131 u32 size = mask & maxbase; /* Find the significant bits */
132 if (!size)
133 return 0;
134
135 /* Get the lowest of them to find the decode size, and
136 from that the extent. */
137 size = (size & ~(size-1)) - 1;
138
139 /* base == maxbase can be valid only if the BAR has
140 already been programmed with all 1s. */
141 if (base == maxbase && ((base | size) & mask) != mask)
142 return 0;
143
144 return size;
145 }
146
147 static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
148 {
149 unsigned int pos, reg, next;
150 u32 l, sz;
151 struct resource *res;
152
153 for(pos=0; pos<howmany; pos = next) {
154 next = pos+1;
155 res = &dev->resource[pos];
156 res->name = pci_name(dev);
157 reg = PCI_BASE_ADDRESS_0 + (pos << 2);
158 pci_read_config_dword(dev, reg, &l);
159 pci_write_config_dword(dev, reg, ~0);
160 pci_read_config_dword(dev, reg, &sz);
161 pci_write_config_dword(dev, reg, l);
162 if (!sz || sz == 0xffffffff)
163 continue;
164 if (l == 0xffffffff)
165 l = 0;
166 if ((l & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) {
167 sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
168 if (!sz)
169 continue;
170 res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
171 res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
172 } else {
173 sz = pci_size(l, sz, PCI_BASE_ADDRESS_IO_MASK & 0xffff);
174 if (!sz)
175 continue;
176 res->start = l & PCI_BASE_ADDRESS_IO_MASK;
177 res->flags |= l & ~PCI_BASE_ADDRESS_IO_MASK;
178 }
179 res->end = res->start + (unsigned long) sz;
180 res->flags |= pci_calc_resource_flags(l);
181 if ((l & (PCI_BASE_ADDRESS_SPACE | PCI_BASE_ADDRESS_MEM_TYPE_MASK))
182 == (PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64)) {
183 u32 szhi, lhi;
184 pci_read_config_dword(dev, reg+4, &lhi);
185 pci_write_config_dword(dev, reg+4, ~0);
186 pci_read_config_dword(dev, reg+4, &szhi);
187 pci_write_config_dword(dev, reg+4, lhi);
188 szhi = pci_size(lhi, szhi, 0xffffffff);
189 next++;
190 #if BITS_PER_LONG == 64
191 res->start |= ((unsigned long) lhi) << 32;
192 res->end = res->start + sz;
193 if (szhi) {
194 /* This BAR needs > 4GB? Wow. */
195 res->end |= (unsigned long)szhi<<32;
196 }
197 #else
198 if (szhi) {
199 printk(KERN_ERR "PCI: Unable to handle 64-bit BAR for device %s\n", pci_name(dev));
200 res->start = 0;
201 res->flags = 0;
202 } else if (lhi) {
203 /* 64-bit wide address, treat as disabled */
204 pci_write_config_dword(dev, reg, l & ~(u32)PCI_BASE_ADDRESS_MEM_MASK);
205 pci_write_config_dword(dev, reg+4, 0);
206 res->start = 0;
207 res->end = sz;
208 }
209 #endif
210 }
211 }
212 if (rom) {
213 dev->rom_base_reg = rom;
214 res = &dev->resource[PCI_ROM_RESOURCE];
215 res->name = pci_name(dev);
216 pci_read_config_dword(dev, rom, &l);
217 pci_write_config_dword(dev, rom, ~PCI_ROM_ADDRESS_ENABLE);
218 pci_read_config_dword(dev, rom, &sz);
219 pci_write_config_dword(dev, rom, l);
220 if (l == 0xffffffff)
221 l = 0;
222 if (sz && sz != 0xffffffff) {
223 sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
224 if (sz) {
225 res->flags = (l & IORESOURCE_ROM_ENABLE) |
226 IORESOURCE_MEM | IORESOURCE_PREFETCH |
227 IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
228 res->start = l & PCI_ROM_ADDRESS_MASK;
229 res->end = res->start + (unsigned long) sz;
230 }
231 }
232 }
233 }
234
235 void __devinit pci_read_bridge_bases(struct pci_bus *child)
236 {
237 struct pci_dev *dev = child->self;
238 u8 io_base_lo, io_limit_lo;
239 u16 mem_base_lo, mem_limit_lo;
240 unsigned long base, limit;
241 struct resource *res;
242 int i;
243
244 if (!dev) /* It's a host bus, nothing to read */
245 return;
246
247 if (dev->transparent) {
248 printk(KERN_INFO "PCI: Transparent bridge - %s\n", pci_name(dev));
249 for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
250 child->resource[i] = child->parent->resource[i - 3];
251 }
252
253 for(i=0; i<3; i++)
254 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
255
256 res = child->resource[0];
257 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
258 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
259 base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
260 limit = (io_limit_lo & PCI_IO_RANGE_MASK) << 8;
261
262 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
263 u16 io_base_hi, io_limit_hi;
264 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
265 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
266 base |= (io_base_hi << 16);
267 limit |= (io_limit_hi << 16);
268 }
269
270 if (base <= limit) {
271 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
272 if (!res->start)
273 res->start = base;
274 if (!res->end)
275 res->end = limit + 0xfff;
276 }
277
278 res = child->resource[1];
279 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
280 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
281 base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
282 limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
283 if (base <= limit) {
284 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
285 res->start = base;
286 res->end = limit + 0xfffff;
287 }
288
289 res = child->resource[2];
290 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
291 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
292 base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
293 limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
294
295 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
296 u32 mem_base_hi, mem_limit_hi;
297 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
298 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
299
300 /*
301 * Some bridges set the base > limit by default, and some
302 * (broken) BIOSes do not initialize them. If we find
303 * this, just assume they are not being used.
304 */
305 if (mem_base_hi <= mem_limit_hi) {
306 #if BITS_PER_LONG == 64
307 base |= ((long) mem_base_hi) << 32;
308 limit |= ((long) mem_limit_hi) << 32;
309 #else
310 if (mem_base_hi || mem_limit_hi) {
311 printk(KERN_ERR "PCI: Unable to handle 64-bit address space for bridge %s\n", pci_name(dev));
312 return;
313 }
314 #endif
315 }
316 }
317 if (base <= limit) {
318 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
319 res->start = base;
320 res->end = limit + 0xfffff;
321 }
322 }
323
324 static struct pci_bus * __devinit pci_alloc_bus(void)
325 {
326 struct pci_bus *b;
327
328 b = kzalloc(sizeof(*b), GFP_KERNEL);
329 if (b) {
330 INIT_LIST_HEAD(&b->node);
331 INIT_LIST_HEAD(&b->children);
332 INIT_LIST_HEAD(&b->devices);
333 }
334 return b;
335 }
336
337 static struct pci_bus * __devinit
338 pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr)
339 {
340 struct pci_bus *child;
341 int i;
342 int retval;
343
344 /*
345 * Allocate a new bus, and inherit stuff from the parent..
346 */
347 child = pci_alloc_bus();
348 if (!child)
349 return NULL;
350
351 child->self = bridge;
352 child->parent = parent;
353 child->ops = parent->ops;
354 child->sysdata = parent->sysdata;
355 child->bus_flags = parent->bus_flags;
356 child->bridge = get_device(&bridge->dev);
357
358 child->class_dev.class = &pcibus_class;
359 sprintf(child->class_dev.class_id, "%04x:%02x", pci_domain_nr(child), busnr);
360 retval = class_device_register(&child->class_dev);
361 if (retval)
362 goto error_register;
363 retval = class_device_create_file(&child->class_dev,
364 &class_device_attr_cpuaffinity);
365 if (retval)
366 goto error_file_create;
367
368 /*
369 * Set up the primary, secondary and subordinate
370 * bus numbers.
371 */
372 child->number = child->secondary = busnr;
373 child->primary = parent->secondary;
374 child->subordinate = 0xff;
375
376 /* Set up default resource pointers and names.. */
377 for (i = 0; i < 4; i++) {
378 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
379 child->resource[i]->name = child->name;
380 }
381 bridge->subordinate = child;
382
383 return child;
384
385 error_file_create:
386 class_device_unregister(&child->class_dev);
387 error_register:
388 kfree(child);
389 return NULL;
390 }
391
392 struct pci_bus * __devinit pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
393 {
394 struct pci_bus *child;
395
396 child = pci_alloc_child_bus(parent, dev, busnr);
397 if (child) {
398 down_write(&pci_bus_sem);
399 list_add_tail(&child->node, &parent->children);
400 up_write(&pci_bus_sem);
401 }
402 return child;
403 }
404
405 static void pci_enable_crs(struct pci_dev *dev)
406 {
407 u16 cap, rpctl;
408 int rpcap = pci_find_capability(dev, PCI_CAP_ID_EXP);
409 if (!rpcap)
410 return;
411
412 pci_read_config_word(dev, rpcap + PCI_CAP_FLAGS, &cap);
413 if (((cap & PCI_EXP_FLAGS_TYPE) >> 4) != PCI_EXP_TYPE_ROOT_PORT)
414 return;
415
416 pci_read_config_word(dev, rpcap + PCI_EXP_RTCTL, &rpctl);
417 rpctl |= PCI_EXP_RTCTL_CRSSVE;
418 pci_write_config_word(dev, rpcap + PCI_EXP_RTCTL, rpctl);
419 }
420
421 static void __devinit pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
422 {
423 struct pci_bus *parent = child->parent;
424
425 /* Attempts to fix that up are really dangerous unless
426 we're going to re-assign all bus numbers. */
427 if (!pcibios_assign_all_busses())
428 return;
429
430 while (parent->parent && parent->subordinate < max) {
431 parent->subordinate = max;
432 pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
433 parent = parent->parent;
434 }
435 }
436
437 unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus);
438
439 /*
440 * If it's a bridge, configure it and scan the bus behind it.
441 * For CardBus bridges, we don't scan behind as the devices will
442 * be handled by the bridge driver itself.
443 *
444 * We need to process bridges in two passes -- first we scan those
445 * already configured by the BIOS and after we are done with all of
446 * them, we proceed to assigning numbers to the remaining buses in
447 * order to avoid overlaps between old and new bus numbers.
448 */
449 int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass)
450 {
451 struct pci_bus *child;
452 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
453 u32 buses, i, j = 0;
454 u16 bctl;
455
456 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
457
458 pr_debug("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
459 pci_name(dev), buses & 0xffffff, pass);
460
461 /* Disable MasterAbortMode during probing to avoid reporting
462 of bus errors (in some architectures) */
463 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
464 pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
465 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
466
467 pci_enable_crs(dev);
468
469 if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) {
470 unsigned int cmax, busnr;
471 /*
472 * Bus already configured by firmware, process it in the first
473 * pass and just note the configuration.
474 */
475 if (pass)
476 goto out;
477 busnr = (buses >> 8) & 0xFF;
478
479 /*
480 * If we already got to this bus through a different bridge,
481 * ignore it. This can happen with the i450NX chipset.
482 */
483 if (pci_find_bus(pci_domain_nr(bus), busnr)) {
484 printk(KERN_INFO "PCI: Bus %04x:%02x already known\n",
485 pci_domain_nr(bus), busnr);
486 goto out;
487 }
488
489 child = pci_add_new_bus(bus, dev, busnr);
490 if (!child)
491 goto out;
492 child->primary = buses & 0xFF;
493 child->subordinate = (buses >> 16) & 0xFF;
494 child->bridge_ctl = bctl;
495
496 cmax = pci_scan_child_bus(child);
497 if (cmax > max)
498 max = cmax;
499 if (child->subordinate > max)
500 max = child->subordinate;
501 } else {
502 /*
503 * We need to assign a number to this bus which we always
504 * do in the second pass.
505 */
506 if (!pass) {
507 if (pcibios_assign_all_busses())
508 /* Temporarily disable forwarding of the
509 configuration cycles on all bridges in
510 this bus segment to avoid possible
511 conflicts in the second pass between two
512 bridges programmed with overlapping
513 bus ranges. */
514 pci_write_config_dword(dev, PCI_PRIMARY_BUS,
515 buses & ~0xffffff);
516 goto out;
517 }
518
519 /* Clear errors */
520 pci_write_config_word(dev, PCI_STATUS, 0xffff);
521
522 /* Prevent assigning a bus number that already exists.
523 * This can happen when a bridge is hot-plugged */
524 if (pci_find_bus(pci_domain_nr(bus), max+1))
525 goto out;
526 child = pci_add_new_bus(bus, dev, ++max);
527 buses = (buses & 0xff000000)
528 | ((unsigned int)(child->primary) << 0)
529 | ((unsigned int)(child->secondary) << 8)
530 | ((unsigned int)(child->subordinate) << 16);
531
532 /*
533 * yenta.c forces a secondary latency timer of 176.
534 * Copy that behaviour here.
535 */
536 if (is_cardbus) {
537 buses &= ~0xff000000;
538 buses |= CARDBUS_LATENCY_TIMER << 24;
539 }
540
541 /*
542 * We need to blast all three values with a single write.
543 */
544 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
545
546 if (!is_cardbus) {
547 child->bridge_ctl = bctl | PCI_BRIDGE_CTL_NO_ISA;
548 /*
549 * Adjust subordinate busnr in parent buses.
550 * We do this before scanning for children because
551 * some devices may not be detected if the bios
552 * was lazy.
553 */
554 pci_fixup_parent_subordinate_busnr(child, max);
555 /* Now we can scan all subordinate buses... */
556 max = pci_scan_child_bus(child);
557 /*
558 * now fix it up again since we have found
559 * the real value of max.
560 */
561 pci_fixup_parent_subordinate_busnr(child, max);
562 } else {
563 /*
564 * For CardBus bridges, we leave 4 bus numbers
565 * as cards with a PCI-to-PCI bridge can be
566 * inserted later.
567 */
568 for (i=0; i<CARDBUS_RESERVE_BUSNR; i++) {
569 struct pci_bus *parent = bus;
570 if (pci_find_bus(pci_domain_nr(bus),
571 max+i+1))
572 break;
573 while (parent->parent) {
574 if ((!pcibios_assign_all_busses()) &&
575 (parent->subordinate > max) &&
576 (parent->subordinate <= max+i)) {
577 j = 1;
578 }
579 parent = parent->parent;
580 }
581 if (j) {
582 /*
583 * Often, there are two cardbus bridges
584 * -- try to leave one valid bus number
585 * for each one.
586 */
587 i /= 2;
588 break;
589 }
590 }
591 max += i;
592 pci_fixup_parent_subordinate_busnr(child, max);
593 }
594 /*
595 * Set the subordinate bus number to its real value.
596 */
597 child->subordinate = max;
598 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
599 }
600
601 sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
602
603 while (bus->parent) {
604 if ((child->subordinate > bus->subordinate) ||
605 (child->number > bus->subordinate) ||
606 (child->number < bus->number) ||
607 (child->subordinate < bus->number)) {
608 printk(KERN_WARNING "PCI: Bus #%02x (-#%02x) is "
609 "hidden behind%s bridge #%02x (-#%02x)%s\n",
610 child->number, child->subordinate,
611 bus->self->transparent ? " transparent" : " ",
612 bus->number, bus->subordinate,
613 pcibios_assign_all_busses() ? " " :
614 " (try 'pci=assign-busses')");
615 printk(KERN_WARNING "Please report the result to "
616 "linux-kernel to fix this permanently\n");
617 }
618 bus = bus->parent;
619 }
620
621 out:
622 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
623
624 return max;
625 }
626
627 /*
628 * Read interrupt line and base address registers.
629 * The architecture-dependent code can tweak these, of course.
630 */
631 static void pci_read_irq(struct pci_dev *dev)
632 {
633 unsigned char irq;
634
635 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
636 dev->pin = irq;
637 if (irq)
638 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
639 dev->irq = irq;
640 }
641
642 /**
643 * pci_setup_device - fill in class and map information of a device
644 * @dev: the device structure to fill
645 *
646 * Initialize the device structure with information about the device's
647 * vendor,class,memory and IO-space addresses,IRQ lines etc.
648 * Called at initialisation of the PCI subsystem and by CardBus services.
649 * Returns 0 on success and -1 if unknown type of device (not normal, bridge
650 * or CardBus).
651 */
652 static int pci_setup_device(struct pci_dev * dev)
653 {
654 u32 class;
655
656 sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
657 dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
658
659 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
660 class >>= 8; /* upper 3 bytes */
661 dev->class = class;
662 class >>= 8;
663
664 pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
665 dev->vendor, dev->device, class, dev->hdr_type);
666
667 /* "Unknown power state" */
668 dev->current_state = PCI_UNKNOWN;
669
670 /* Early fixups, before probing the BARs */
671 pci_fixup_device(pci_fixup_early, dev);
672 class = dev->class >> 8;
673
674 switch (dev->hdr_type) { /* header type */
675 case PCI_HEADER_TYPE_NORMAL: /* standard header */
676 if (class == PCI_CLASS_BRIDGE_PCI)
677 goto bad;
678 pci_read_irq(dev);
679 pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
680 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
681 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
682
683 /*
684 * Do the ugly legacy mode stuff here rather than broken chip
685 * quirk code. Legacy mode ATA controllers have fixed
686 * addresses. These are not always echoed in BAR0-3, and
687 * BAR0-3 in a few cases contain junk!
688 */
689 if (class == PCI_CLASS_STORAGE_IDE) {
690 u8 progif;
691 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
692 if ((progif & 1) == 0) {
693 dev->resource[0].start = 0x1F0;
694 dev->resource[0].end = 0x1F7;
695 dev->resource[0].flags = IORESOURCE_IO;
696 dev->resource[1].start = 0x3F6;
697 dev->resource[1].end = 0x3F6;
698 dev->resource[1].flags = IORESOURCE_IO;
699 }
700 if ((progif & 4) == 0) {
701 dev->resource[2].start = 0x170;
702 dev->resource[2].end = 0x177;
703 dev->resource[2].flags = IORESOURCE_IO;
704 dev->resource[3].start = 0x376;
705 dev->resource[3].end = 0x376;
706 dev->resource[3].flags = IORESOURCE_IO;
707 }
708 }
709 break;
710
711 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
712 if (class != PCI_CLASS_BRIDGE_PCI)
713 goto bad;
714 /* The PCI-to-PCI bridge spec requires that subtractive
715 decoding (i.e. transparent) bridge must have programming
716 interface code of 0x01. */
717 pci_read_irq(dev);
718 dev->transparent = ((dev->class & 0xff) == 1);
719 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
720 break;
721
722 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
723 if (class != PCI_CLASS_BRIDGE_CARDBUS)
724 goto bad;
725 pci_read_irq(dev);
726 pci_read_bases(dev, 1, 0);
727 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
728 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
729 break;
730
731 default: /* unknown header */
732 printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n",
733 pci_name(dev), dev->hdr_type);
734 return -1;
735
736 bad:
737 printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n",
738 pci_name(dev), class, dev->hdr_type);
739 dev->class = PCI_CLASS_NOT_DEFINED;
740 }
741
742 /* We found a fine healthy device, go go go... */
743 return 0;
744 }
745
746 /**
747 * pci_release_dev - free a pci device structure when all users of it are finished.
748 * @dev: device that's been disconnected
749 *
750 * Will be called only by the device core when all users of this pci device are
751 * done.
752 */
753 static void pci_release_dev(struct device *dev)
754 {
755 struct pci_dev *pci_dev;
756
757 pci_dev = to_pci_dev(dev);
758 kfree(pci_dev);
759 }
760
761 /**
762 * pci_cfg_space_size - get the configuration space size of the PCI device.
763 * @dev: PCI device
764 *
765 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
766 * have 4096 bytes. Even if the device is capable, that doesn't mean we can
767 * access it. Maybe we don't have a way to generate extended config space
768 * accesses, or the device is behind a reverse Express bridge. So we try
769 * reading the dword at 0x100 which must either be 0 or a valid extended
770 * capability header.
771 */
772 int pci_cfg_space_size(struct pci_dev *dev)
773 {
774 int pos;
775 u32 status;
776
777 pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
778 if (!pos) {
779 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
780 if (!pos)
781 goto fail;
782
783 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
784 if (!(status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)))
785 goto fail;
786 }
787
788 if (pci_read_config_dword(dev, 256, &status) != PCIBIOS_SUCCESSFUL)
789 goto fail;
790 if (status == 0xffffffff)
791 goto fail;
792
793 return PCI_CFG_SPACE_EXP_SIZE;
794
795 fail:
796 return PCI_CFG_SPACE_SIZE;
797 }
798
799 static void pci_release_bus_bridge_dev(struct device *dev)
800 {
801 kfree(dev);
802 }
803
804 /*
805 * Read the config data for a PCI device, sanity-check it
806 * and fill in the dev structure...
807 */
808 static struct pci_dev * __devinit
809 pci_scan_device(struct pci_bus *bus, int devfn)
810 {
811 struct pci_dev *dev;
812 u32 l;
813 u8 hdr_type;
814 int delay = 1;
815
816 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
817 return NULL;
818
819 /* some broken boards return 0 or ~0 if a slot is empty: */
820 if (l == 0xffffffff || l == 0x00000000 ||
821 l == 0x0000ffff || l == 0xffff0000)
822 return NULL;
823
824 /* Configuration request Retry Status */
825 while (l == 0xffff0001) {
826 msleep(delay);
827 delay *= 2;
828 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
829 return NULL;
830 /* Card hasn't responded in 60 seconds? Must be stuck. */
831 if (delay > 60 * 1000) {
832 printk(KERN_WARNING "Device %04x:%02x:%02x.%d not "
833 "responding\n", pci_domain_nr(bus),
834 bus->number, PCI_SLOT(devfn),
835 PCI_FUNC(devfn));
836 return NULL;
837 }
838 }
839
840 if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type))
841 return NULL;
842
843 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
844 if (!dev)
845 return NULL;
846
847 dev->bus = bus;
848 dev->sysdata = bus->sysdata;
849 dev->dev.parent = bus->bridge;
850 dev->dev.bus = &pci_bus_type;
851 dev->devfn = devfn;
852 dev->hdr_type = hdr_type & 0x7f;
853 dev->multifunction = !!(hdr_type & 0x80);
854 dev->vendor = l & 0xffff;
855 dev->device = (l >> 16) & 0xffff;
856 dev->cfg_size = pci_cfg_space_size(dev);
857 dev->error_state = pci_channel_io_normal;
858
859 /* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
860 set this higher, assuming the system even supports it. */
861 dev->dma_mask = 0xffffffff;
862 if (pci_setup_device(dev) < 0) {
863 kfree(dev);
864 return NULL;
865 }
866
867 return dev;
868 }
869
870 void __devinit pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
871 {
872 device_initialize(&dev->dev);
873 dev->dev.release = pci_release_dev;
874 pci_dev_get(dev);
875
876 dev->dev.dma_mask = &dev->dma_mask;
877 dev->dev.coherent_dma_mask = 0xffffffffull;
878
879 /* Fix up broken headers */
880 pci_fixup_device(pci_fixup_header, dev);
881
882 /*
883 * Add the device to our list of discovered devices
884 * and the bus list for fixup functions, etc.
885 */
886 INIT_LIST_HEAD(&dev->global_list);
887 down_write(&pci_bus_sem);
888 list_add_tail(&dev->bus_list, &bus->devices);
889 up_write(&pci_bus_sem);
890 }
891
892 struct pci_dev * __devinit
893 pci_scan_single_device(struct pci_bus *bus, int devfn)
894 {
895 struct pci_dev *dev;
896
897 dev = pci_scan_device(bus, devfn);
898 if (!dev)
899 return NULL;
900
901 pci_device_add(dev, bus);
902 pci_scan_msi_device(dev);
903
904 return dev;
905 }
906
907 /**
908 * pci_scan_slot - scan a PCI slot on a bus for devices.
909 * @bus: PCI bus to scan
910 * @devfn: slot number to scan (must have zero function.)
911 *
912 * Scan a PCI slot on the specified PCI bus for devices, adding
913 * discovered devices to the @bus->devices list. New devices
914 * will have an empty dev->global_list head.
915 */
916 int __devinit pci_scan_slot(struct pci_bus *bus, int devfn)
917 {
918 int func, nr = 0;
919 int scan_all_fns;
920
921 scan_all_fns = pcibios_scan_all_fns(bus, devfn);
922
923 for (func = 0; func < 8; func++, devfn++) {
924 struct pci_dev *dev;
925
926 dev = pci_scan_single_device(bus, devfn);
927 if (dev) {
928 nr++;
929
930 /*
931 * If this is a single function device,
932 * don't scan past the first function.
933 */
934 if (!dev->multifunction) {
935 if (func > 0) {
936 dev->multifunction = 1;
937 } else {
938 break;
939 }
940 }
941 } else {
942 if (func == 0 && !scan_all_fns)
943 break;
944 }
945 }
946 return nr;
947 }
948
949 unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus)
950 {
951 unsigned int devfn, pass, max = bus->secondary;
952 struct pci_dev *dev;
953
954 pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
955
956 /* Go find them, Rover! */
957 for (devfn = 0; devfn < 0x100; devfn += 8)
958 pci_scan_slot(bus, devfn);
959
960 /*
961 * After performing arch-dependent fixup of the bus, look behind
962 * all PCI-to-PCI bridges on this bus.
963 */
964 pr_debug("PCI: Fixups for bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
965 pcibios_fixup_bus(bus);
966 for (pass=0; pass < 2; pass++)
967 list_for_each_entry(dev, &bus->devices, bus_list) {
968 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
969 dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
970 max = pci_scan_bridge(bus, dev, max, pass);
971 }
972
973 /*
974 * We've scanned the bus and so we know all about what's on
975 * the other side of any bridges that may be on this bus plus
976 * any devices.
977 *
978 * Return how far we've got finding sub-buses.
979 */
980 pr_debug("PCI: Bus scan for %04x:%02x returning with max=%02x\n",
981 pci_domain_nr(bus), bus->number, max);
982 return max;
983 }
984
985 unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
986 {
987 unsigned int max;
988
989 max = pci_scan_child_bus(bus);
990
991 /*
992 * Make the discovered devices available.
993 */
994 pci_bus_add_devices(bus);
995
996 return max;
997 }
998
999 struct pci_bus * __devinit pci_create_bus(struct device *parent,
1000 int bus, struct pci_ops *ops, void *sysdata)
1001 {
1002 int error;
1003 struct pci_bus *b;
1004 struct device *dev;
1005
1006 b = pci_alloc_bus();
1007 if (!b)
1008 return NULL;
1009
1010 dev = kmalloc(sizeof(*dev), GFP_KERNEL);
1011 if (!dev){
1012 kfree(b);
1013 return NULL;
1014 }
1015
1016 b->sysdata = sysdata;
1017 b->ops = ops;
1018
1019 if (pci_find_bus(pci_domain_nr(b), bus)) {
1020 /* If we already got to this bus through a different bridge, ignore it */
1021 pr_debug("PCI: Bus %04x:%02x already known\n", pci_domain_nr(b), bus);
1022 goto err_out;
1023 }
1024
1025 down_write(&pci_bus_sem);
1026 list_add_tail(&b->node, &pci_root_buses);
1027 up_write(&pci_bus_sem);
1028
1029 memset(dev, 0, sizeof(*dev));
1030 dev->parent = parent;
1031 dev->release = pci_release_bus_bridge_dev;
1032 sprintf(dev->bus_id, "pci%04x:%02x", pci_domain_nr(b), bus);
1033 error = device_register(dev);
1034 if (error)
1035 goto dev_reg_err;
1036 b->bridge = get_device(dev);
1037
1038 b->class_dev.class = &pcibus_class;
1039 sprintf(b->class_dev.class_id, "%04x:%02x", pci_domain_nr(b), bus);
1040 error = class_device_register(&b->class_dev);
1041 if (error)
1042 goto class_dev_reg_err;
1043 error = class_device_create_file(&b->class_dev, &class_device_attr_cpuaffinity);
1044 if (error)
1045 goto class_dev_create_file_err;
1046
1047 /* Create legacy_io and legacy_mem files for this bus */
1048 pci_create_legacy_files(b);
1049
1050 error = sysfs_create_link(&b->class_dev.kobj, &b->bridge->kobj, "bridge");
1051 if (error)
1052 goto sys_create_link_err;
1053
1054 b->number = b->secondary = bus;
1055 b->resource[0] = &ioport_resource;
1056 b->resource[1] = &iomem_resource;
1057
1058 return b;
1059
1060 sys_create_link_err:
1061 class_device_remove_file(&b->class_dev, &class_device_attr_cpuaffinity);
1062 class_dev_create_file_err:
1063 class_device_unregister(&b->class_dev);
1064 class_dev_reg_err:
1065 device_unregister(dev);
1066 dev_reg_err:
1067 down_write(&pci_bus_sem);
1068 list_del(&b->node);
1069 up_write(&pci_bus_sem);
1070 err_out:
1071 kfree(dev);
1072 kfree(b);
1073 return NULL;
1074 }
1075 EXPORT_SYMBOL_GPL(pci_create_bus);
1076
1077 struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent,
1078 int bus, struct pci_ops *ops, void *sysdata)
1079 {
1080 struct pci_bus *b;
1081
1082 b = pci_create_bus(parent, bus, ops, sysdata);
1083 if (b)
1084 b->subordinate = pci_scan_child_bus(b);
1085 return b;
1086 }
1087 EXPORT_SYMBOL(pci_scan_bus_parented);
1088
1089 #ifdef CONFIG_HOTPLUG
1090 EXPORT_SYMBOL(pci_add_new_bus);
1091 EXPORT_SYMBOL(pci_do_scan_bus);
1092 EXPORT_SYMBOL(pci_scan_slot);
1093 EXPORT_SYMBOL(pci_scan_bridge);
1094 EXPORT_SYMBOL(pci_scan_single_device);
1095 EXPORT_SYMBOL_GPL(pci_scan_child_bus);
1096 #endif
1097
1098 static int __init pci_sort_bf_cmp(const struct pci_dev *a, const struct pci_dev *b)
1099 {
1100 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
1101 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1;
1102
1103 if (a->bus->number < b->bus->number) return -1;
1104 else if (a->bus->number > b->bus->number) return 1;
1105
1106 if (a->devfn < b->devfn) return -1;
1107 else if (a->devfn > b->devfn) return 1;
1108
1109 return 0;
1110 }
1111
1112 /*
1113 * Yes, this forcably breaks the klist abstraction temporarily. It
1114 * just wants to sort the klist, not change reference counts and
1115 * take/drop locks rapidly in the process. It does all this while
1116 * holding the lock for the list, so objects can't otherwise be
1117 * added/removed while we're swizzling.
1118 */
1119 static void __init pci_insertion_sort_klist(struct pci_dev *a, struct list_head *list)
1120 {
1121 struct list_head *pos;
1122 struct klist_node *n;
1123 struct device *dev;
1124 struct pci_dev *b;
1125
1126 list_for_each(pos, list) {
1127 n = container_of(pos, struct klist_node, n_node);
1128 dev = container_of(n, struct device, knode_bus);
1129 b = to_pci_dev(dev);
1130 if (pci_sort_bf_cmp(a, b) <= 0) {
1131 list_move_tail(&a->dev.knode_bus.n_node, &b->dev.knode_bus.n_node);
1132 return;
1133 }
1134 }
1135 list_move_tail(&a->dev.knode_bus.n_node, list);
1136 }
1137
1138 static void __init pci_sort_breadthfirst_klist(void)
1139 {
1140 LIST_HEAD(sorted_devices);
1141 struct list_head *pos, *tmp;
1142 struct klist_node *n;
1143 struct device *dev;
1144 struct pci_dev *pdev;
1145
1146 spin_lock(&pci_bus_type.klist_devices.k_lock);
1147 list_for_each_safe(pos, tmp, &pci_bus_type.klist_devices.k_list) {
1148 n = container_of(pos, struct klist_node, n_node);
1149 dev = container_of(n, struct device, knode_bus);
1150 pdev = to_pci_dev(dev);
1151 pci_insertion_sort_klist(pdev, &sorted_devices);
1152 }
1153 list_splice(&sorted_devices, &pci_bus_type.klist_devices.k_list);
1154 spin_unlock(&pci_bus_type.klist_devices.k_lock);
1155 }
1156
1157 static void __init pci_insertion_sort_devices(struct pci_dev *a, struct list_head *list)
1158 {
1159 struct pci_dev *b;
1160
1161 list_for_each_entry(b, list, global_list) {
1162 if (pci_sort_bf_cmp(a, b) <= 0) {
1163 list_move_tail(&a->global_list, &b->global_list);
1164 return;
1165 }
1166 }
1167 list_move_tail(&a->global_list, list);
1168 }
1169
1170 static void __init pci_sort_breadthfirst_devices(void)
1171 {
1172 LIST_HEAD(sorted_devices);
1173 struct pci_dev *dev, *tmp;
1174
1175 down_write(&pci_bus_sem);
1176 list_for_each_entry_safe(dev, tmp, &pci_devices, global_list) {
1177 pci_insertion_sort_devices(dev, &sorted_devices);
1178 }
1179 list_splice(&sorted_devices, &pci_devices);
1180 up_write(&pci_bus_sem);
1181 }
1182
1183 void __init pci_sort_breadthfirst(void)
1184 {
1185 pci_sort_breadthfirst_devices();
1186 pci_sort_breadthfirst_klist();
1187 }
1188
linux v2.6.22.y-op