m32r: __xchg() should be always_inline
[linux-2.6.22.y-op.git] / drivers / hwmon / w83627hf.c
bloba5b774b07cbde457618d6885fd96d675193f8c11
1 /*
2 w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
3 monitoring
4 Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>,
5 Philip Edelbrock <phil@netroedge.com>,
6 and Mark Studebaker <mdsxyz123@yahoo.com>
7 Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
8 Copyright (c) 2007 Jean Delvare <khali@linux-fr.org>
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 Supports following chips:
28 Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
29 w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
30 w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
31 w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
32 w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
33 w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
35 For other winbond chips, and for i2c support in the above chips,
36 use w83781d.c.
38 Note: automatic ("cruise") fan control for 697, 637 & 627thf not
39 supported yet.
42 #include <linux/module.h>
43 #include <linux/init.h>
44 #include <linux/slab.h>
45 #include <linux/jiffies.h>
46 #include <linux/platform_device.h>
47 #include <linux/hwmon.h>
48 #include <linux/hwmon-vid.h>
49 #include <linux/err.h>
50 #include <linux/mutex.h>
51 #include <linux/ioport.h>
52 #include <asm/io.h>
53 #include "lm75.h"
55 static struct platform_device *pdev;
57 #define DRVNAME "w83627hf"
58 enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
60 static u16 force_addr;
61 module_param(force_addr, ushort, 0);
62 MODULE_PARM_DESC(force_addr,
63 "Initialize the base address of the sensors");
64 static u8 force_i2c = 0x1f;
65 module_param(force_i2c, byte, 0);
66 MODULE_PARM_DESC(force_i2c,
67 "Initialize the i2c address of the sensors");
69 static int reset;
70 module_param(reset, bool, 0);
71 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
73 static int init = 1;
74 module_param(init, bool, 0);
75 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
77 /* modified from kernel/include/traps.c */
78 static int REG; /* The register to read/write */
79 #define DEV 0x07 /* Register: Logical device select */
80 static int VAL; /* The value to read/write */
82 /* logical device numbers for superio_select (below) */
83 #define W83627HF_LD_FDC 0x00
84 #define W83627HF_LD_PRT 0x01
85 #define W83627HF_LD_UART1 0x02
86 #define W83627HF_LD_UART2 0x03
87 #define W83627HF_LD_KBC 0x05
88 #define W83627HF_LD_CIR 0x06 /* w83627hf only */
89 #define W83627HF_LD_GAME 0x07
90 #define W83627HF_LD_MIDI 0x07
91 #define W83627HF_LD_GPIO1 0x07
92 #define W83627HF_LD_GPIO5 0x07 /* w83627thf only */
93 #define W83627HF_LD_GPIO2 0x08
94 #define W83627HF_LD_GPIO3 0x09
95 #define W83627HF_LD_GPIO4 0x09 /* w83627thf only */
96 #define W83627HF_LD_ACPI 0x0a
97 #define W83627HF_LD_HWM 0x0b
99 #define DEVID 0x20 /* Register: Device ID */
101 #define W83627THF_GPIO5_EN 0x30 /* w83627thf only */
102 #define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */
103 #define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */
105 #define W83687THF_VID_EN 0x29 /* w83687thf only */
106 #define W83687THF_VID_CFG 0xF0 /* w83687thf only */
107 #define W83687THF_VID_DATA 0xF1 /* w83687thf only */
109 static inline void
110 superio_outb(int reg, int val)
112 outb(reg, REG);
113 outb(val, VAL);
116 static inline int
117 superio_inb(int reg)
119 outb(reg, REG);
120 return inb(VAL);
123 static inline void
124 superio_select(int ld)
126 outb(DEV, REG);
127 outb(ld, VAL);
130 static inline void
131 superio_enter(void)
133 outb(0x87, REG);
134 outb(0x87, REG);
137 static inline void
138 superio_exit(void)
140 outb(0xAA, REG);
143 #define W627_DEVID 0x52
144 #define W627THF_DEVID 0x82
145 #define W697_DEVID 0x60
146 #define W637_DEVID 0x70
147 #define W687THF_DEVID 0x85
148 #define WINB_ACT_REG 0x30
149 #define WINB_BASE_REG 0x60
150 /* Constants specified below */
152 /* Alignment of the base address */
153 #define WINB_ALIGNMENT ~7
155 /* Offset & size of I/O region we are interested in */
156 #define WINB_REGION_OFFSET 5
157 #define WINB_REGION_SIZE 2
159 /* Where are the sensors address/data registers relative to the region offset */
160 #define W83781D_ADDR_REG_OFFSET 0
161 #define W83781D_DATA_REG_OFFSET 1
163 /* The W83781D registers */
164 /* The W83782D registers for nr=7,8 are in bank 5 */
165 #define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
166 (0x554 + (((nr) - 7) * 2)))
167 #define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
168 (0x555 + (((nr) - 7) * 2)))
169 #define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
170 (0x550 + (nr) - 7))
172 #define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
173 #define W83781D_REG_FAN(nr) (0x27 + (nr))
175 #define W83781D_REG_TEMP2_CONFIG 0x152
176 #define W83781D_REG_TEMP3_CONFIG 0x252
177 #define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \
178 ((nr == 2) ? (0x0150) : \
179 (0x27)))
180 #define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \
181 ((nr == 2) ? (0x153) : \
182 (0x3A)))
183 #define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \
184 ((nr == 2) ? (0x155) : \
185 (0x39)))
187 #define W83781D_REG_BANK 0x4E
189 #define W83781D_REG_CONFIG 0x40
190 #define W83781D_REG_ALARM1 0x459
191 #define W83781D_REG_ALARM2 0x45A
192 #define W83781D_REG_ALARM3 0x45B
194 #define W83781D_REG_BEEP_CONFIG 0x4D
195 #define W83781D_REG_BEEP_INTS1 0x56
196 #define W83781D_REG_BEEP_INTS2 0x57
197 #define W83781D_REG_BEEP_INTS3 0x453
199 #define W83781D_REG_VID_FANDIV 0x47
201 #define W83781D_REG_CHIPID 0x49
202 #define W83781D_REG_WCHIPID 0x58
203 #define W83781D_REG_CHIPMAN 0x4F
204 #define W83781D_REG_PIN 0x4B
206 #define W83781D_REG_VBAT 0x5D
208 #define W83627HF_REG_PWM1 0x5A
209 #define W83627HF_REG_PWM2 0x5B
211 #define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */
212 #define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */
213 #define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */
215 #define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF/687THF too */
217 static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
218 static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
219 W83627THF_REG_PWM3 };
220 #define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
221 regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1])
223 #define W83781D_REG_I2C_ADDR 0x48
224 #define W83781D_REG_I2C_SUBADDR 0x4A
226 /* Sensor selection */
227 #define W83781D_REG_SCFG1 0x5D
228 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
229 #define W83781D_REG_SCFG2 0x59
230 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
231 #define W83781D_DEFAULT_BETA 3435
233 /* Conversions. Limit checking is only done on the TO_REG
234 variants. Note that you should be a bit careful with which arguments
235 these macros are called: arguments may be evaluated more than once.
236 Fixing this is just not worth it. */
237 #define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255))
238 #define IN_FROM_REG(val) ((val) * 16)
240 static inline u8 FAN_TO_REG(long rpm, int div)
242 if (rpm == 0)
243 return 255;
244 rpm = SENSORS_LIMIT(rpm, 1, 1000000);
245 return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1,
246 254);
249 #define TEMP_MIN (-128000)
250 #define TEMP_MAX ( 127000)
252 /* TEMP: 0.001C/bit (-128C to +127C)
253 REG: 1C/bit, two's complement */
254 static u8 TEMP_TO_REG(int temp)
256 int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX);
257 ntemp += (ntemp<0 ? -500 : 500);
258 return (u8)(ntemp / 1000);
261 static int TEMP_FROM_REG(u8 reg)
263 return (s8)reg * 1000;
266 #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
268 #define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
270 #define BEEP_MASK_FROM_REG(val) (val)
271 #define BEEP_MASK_TO_REG(val) ((val) & 0xffffff)
272 #define BEEP_ENABLE_TO_REG(val) ((val)?1:0)
273 #define BEEP_ENABLE_FROM_REG(val) ((val)?1:0)
275 #define DIV_FROM_REG(val) (1 << (val))
277 static inline u8 DIV_TO_REG(long val)
279 int i;
280 val = SENSORS_LIMIT(val, 1, 128) >> 1;
281 for (i = 0; i < 7; i++) {
282 if (val == 0)
283 break;
284 val >>= 1;
286 return ((u8) i);
289 /* For each registered chip, we need to keep some data in memory.
290 The structure is dynamically allocated. */
291 struct w83627hf_data {
292 unsigned short addr;
293 const char *name;
294 struct class_device *class_dev;
295 struct mutex lock;
296 enum chips type;
298 struct mutex update_lock;
299 char valid; /* !=0 if following fields are valid */
300 unsigned long last_updated; /* In jiffies */
302 u8 in[9]; /* Register value */
303 u8 in_max[9]; /* Register value */
304 u8 in_min[9]; /* Register value */
305 u8 fan[3]; /* Register value */
306 u8 fan_min[3]; /* Register value */
307 u8 temp;
308 u8 temp_max; /* Register value */
309 u8 temp_max_hyst; /* Register value */
310 u16 temp_add[2]; /* Register value */
311 u16 temp_max_add[2]; /* Register value */
312 u16 temp_max_hyst_add[2]; /* Register value */
313 u8 fan_div[3]; /* Register encoding, shifted right */
314 u8 vid; /* Register encoding, combined */
315 u32 alarms; /* Register encoding, combined */
316 u32 beep_mask; /* Register encoding, combined */
317 u8 beep_enable; /* Boolean */
318 u8 pwm[3]; /* Register value */
319 u16 sens[3]; /* 782D/783S only.
320 1 = pentium diode; 2 = 3904 diode;
321 3000-5000 = thermistor beta.
322 Default = 3435.
323 Other Betas unimplemented */
324 u8 vrm;
325 u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */
328 struct w83627hf_sio_data {
329 enum chips type;
333 static int w83627hf_probe(struct platform_device *pdev);
334 static int w83627hf_remove(struct platform_device *pdev);
336 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
337 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);
338 static struct w83627hf_data *w83627hf_update_device(struct device *dev);
339 static void w83627hf_init_device(struct platform_device *pdev);
341 static struct platform_driver w83627hf_driver = {
342 .driver = {
343 .owner = THIS_MODULE,
344 .name = DRVNAME,
346 .probe = w83627hf_probe,
347 .remove = __devexit_p(w83627hf_remove),
350 /* following are the sysfs callback functions */
351 #define show_in_reg(reg) \
352 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
354 struct w83627hf_data *data = w83627hf_update_device(dev); \
355 return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr])); \
357 show_in_reg(in)
358 show_in_reg(in_min)
359 show_in_reg(in_max)
361 #define store_in_reg(REG, reg) \
362 static ssize_t \
363 store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
365 struct w83627hf_data *data = dev_get_drvdata(dev); \
366 u32 val; \
368 val = simple_strtoul(buf, NULL, 10); \
370 mutex_lock(&data->update_lock); \
371 data->in_##reg[nr] = IN_TO_REG(val); \
372 w83627hf_write_value(data, W83781D_REG_IN_##REG(nr), \
373 data->in_##reg[nr]); \
375 mutex_unlock(&data->update_lock); \
376 return count; \
378 store_in_reg(MIN, min)
379 store_in_reg(MAX, max)
381 #define sysfs_in_offset(offset) \
382 static ssize_t \
383 show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
385 return show_in(dev, buf, offset); \
387 static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
389 #define sysfs_in_reg_offset(reg, offset) \
390 static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
392 return show_in_##reg (dev, buf, offset); \
394 static ssize_t \
395 store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, \
396 const char *buf, size_t count) \
398 return store_in_##reg (dev, buf, count, offset); \
400 static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, \
401 show_regs_in_##reg##offset, store_regs_in_##reg##offset);
403 #define sysfs_in_offsets(offset) \
404 sysfs_in_offset(offset) \
405 sysfs_in_reg_offset(min, offset) \
406 sysfs_in_reg_offset(max, offset)
408 sysfs_in_offsets(1);
409 sysfs_in_offsets(2);
410 sysfs_in_offsets(3);
411 sysfs_in_offsets(4);
412 sysfs_in_offsets(5);
413 sysfs_in_offsets(6);
414 sysfs_in_offsets(7);
415 sysfs_in_offsets(8);
417 /* use a different set of functions for in0 */
418 static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
420 long in0;
422 if ((data->vrm_ovt & 0x01) &&
423 (w83627thf == data->type || w83637hf == data->type
424 || w83687thf == data->type))
426 /* use VRM9 calculation */
427 in0 = (long)((reg * 488 + 70000 + 50) / 100);
428 else
429 /* use VRM8 (standard) calculation */
430 in0 = (long)IN_FROM_REG(reg);
432 return sprintf(buf,"%ld\n", in0);
435 static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf)
437 struct w83627hf_data *data = w83627hf_update_device(dev);
438 return show_in_0(data, buf, data->in[0]);
441 static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf)
443 struct w83627hf_data *data = w83627hf_update_device(dev);
444 return show_in_0(data, buf, data->in_min[0]);
447 static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf)
449 struct w83627hf_data *data = w83627hf_update_device(dev);
450 return show_in_0(data, buf, data->in_max[0]);
453 static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr,
454 const char *buf, size_t count)
456 struct w83627hf_data *data = dev_get_drvdata(dev);
457 u32 val;
459 val = simple_strtoul(buf, NULL, 10);
461 mutex_lock(&data->update_lock);
463 if ((data->vrm_ovt & 0x01) &&
464 (w83627thf == data->type || w83637hf == data->type
465 || w83687thf == data->type))
467 /* use VRM9 calculation */
468 data->in_min[0] =
469 SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0,
470 255);
471 else
472 /* use VRM8 (standard) calculation */
473 data->in_min[0] = IN_TO_REG(val);
475 w83627hf_write_value(data, W83781D_REG_IN_MIN(0), data->in_min[0]);
476 mutex_unlock(&data->update_lock);
477 return count;
480 static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr,
481 const char *buf, size_t count)
483 struct w83627hf_data *data = dev_get_drvdata(dev);
484 u32 val;
486 val = simple_strtoul(buf, NULL, 10);
488 mutex_lock(&data->update_lock);
490 if ((data->vrm_ovt & 0x01) &&
491 (w83627thf == data->type || w83637hf == data->type
492 || w83687thf == data->type))
494 /* use VRM9 calculation */
495 data->in_max[0] =
496 SENSORS_LIMIT(((val * 100) - 70000 + 244) / 488, 0,
497 255);
498 else
499 /* use VRM8 (standard) calculation */
500 data->in_max[0] = IN_TO_REG(val);
502 w83627hf_write_value(data, W83781D_REG_IN_MAX(0), data->in_max[0]);
503 mutex_unlock(&data->update_lock);
504 return count;
507 static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL);
508 static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
509 show_regs_in_min0, store_regs_in_min0);
510 static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
511 show_regs_in_max0, store_regs_in_max0);
513 #define show_fan_reg(reg) \
514 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
516 struct w83627hf_data *data = w83627hf_update_device(dev); \
517 return sprintf(buf,"%ld\n", \
518 FAN_FROM_REG(data->reg[nr-1], \
519 (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
521 show_fan_reg(fan);
522 show_fan_reg(fan_min);
524 static ssize_t
525 store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
527 struct w83627hf_data *data = dev_get_drvdata(dev);
528 u32 val;
530 val = simple_strtoul(buf, NULL, 10);
532 mutex_lock(&data->update_lock);
533 data->fan_min[nr - 1] =
534 FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
535 w83627hf_write_value(data, W83781D_REG_FAN_MIN(nr),
536 data->fan_min[nr - 1]);
538 mutex_unlock(&data->update_lock);
539 return count;
542 #define sysfs_fan_offset(offset) \
543 static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
545 return show_fan(dev, buf, offset); \
547 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
549 #define sysfs_fan_min_offset(offset) \
550 static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \
552 return show_fan_min(dev, buf, offset); \
554 static ssize_t \
555 store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
557 return store_fan_min(dev, buf, count, offset); \
559 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
560 show_regs_fan_min##offset, store_regs_fan_min##offset);
562 sysfs_fan_offset(1);
563 sysfs_fan_min_offset(1);
564 sysfs_fan_offset(2);
565 sysfs_fan_min_offset(2);
566 sysfs_fan_offset(3);
567 sysfs_fan_min_offset(3);
569 #define show_temp_reg(reg) \
570 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
572 struct w83627hf_data *data = w83627hf_update_device(dev); \
573 if (nr >= 2) { /* TEMP2 and TEMP3 */ \
574 return sprintf(buf,"%ld\n", \
575 (long)LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
576 } else { /* TEMP1 */ \
577 return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
580 show_temp_reg(temp);
581 show_temp_reg(temp_max);
582 show_temp_reg(temp_max_hyst);
584 #define store_temp_reg(REG, reg) \
585 static ssize_t \
586 store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
588 struct w83627hf_data *data = dev_get_drvdata(dev); \
589 u32 val; \
591 val = simple_strtoul(buf, NULL, 10); \
593 mutex_lock(&data->update_lock); \
595 if (nr >= 2) { /* TEMP2 and TEMP3 */ \
596 data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
597 w83627hf_write_value(data, W83781D_REG_TEMP_##REG(nr), \
598 data->temp_##reg##_add[nr-2]); \
599 } else { /* TEMP1 */ \
600 data->temp_##reg = TEMP_TO_REG(val); \
601 w83627hf_write_value(data, W83781D_REG_TEMP_##REG(nr), \
602 data->temp_##reg); \
605 mutex_unlock(&data->update_lock); \
606 return count; \
608 store_temp_reg(OVER, max);
609 store_temp_reg(HYST, max_hyst);
611 #define sysfs_temp_offset(offset) \
612 static ssize_t \
613 show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
615 return show_temp(dev, buf, offset); \
617 static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
619 #define sysfs_temp_reg_offset(reg, offset) \
620 static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
622 return show_temp_##reg (dev, buf, offset); \
624 static ssize_t \
625 store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, \
626 const char *buf, size_t count) \
628 return store_temp_##reg (dev, buf, count, offset); \
630 static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
631 show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
633 #define sysfs_temp_offsets(offset) \
634 sysfs_temp_offset(offset) \
635 sysfs_temp_reg_offset(max, offset) \
636 sysfs_temp_reg_offset(max_hyst, offset)
638 sysfs_temp_offsets(1);
639 sysfs_temp_offsets(2);
640 sysfs_temp_offsets(3);
642 static ssize_t
643 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
645 struct w83627hf_data *data = w83627hf_update_device(dev);
646 return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
648 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
650 static ssize_t
651 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
653 struct w83627hf_data *data = w83627hf_update_device(dev);
654 return sprintf(buf, "%ld\n", (long) data->vrm);
656 static ssize_t
657 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
659 struct w83627hf_data *data = dev_get_drvdata(dev);
660 u32 val;
662 val = simple_strtoul(buf, NULL, 10);
663 data->vrm = val;
665 return count;
667 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
669 static ssize_t
670 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
672 struct w83627hf_data *data = w83627hf_update_device(dev);
673 return sprintf(buf, "%ld\n", (long) data->alarms);
675 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
677 #define show_beep_reg(REG, reg) \
678 static ssize_t show_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
680 struct w83627hf_data *data = w83627hf_update_device(dev); \
681 return sprintf(buf,"%ld\n", \
682 (long)BEEP_##REG##_FROM_REG(data->beep_##reg)); \
684 show_beep_reg(ENABLE, enable)
685 show_beep_reg(MASK, mask)
687 #define BEEP_ENABLE 0 /* Store beep_enable */
688 #define BEEP_MASK 1 /* Store beep_mask */
690 static ssize_t
691 store_beep_reg(struct device *dev, const char *buf, size_t count,
692 int update_mask)
694 struct w83627hf_data *data = dev_get_drvdata(dev);
695 u32 val, val2;
697 val = simple_strtoul(buf, NULL, 10);
699 mutex_lock(&data->update_lock);
701 if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
702 data->beep_mask = BEEP_MASK_TO_REG(val);
703 w83627hf_write_value(data, W83781D_REG_BEEP_INTS1,
704 data->beep_mask & 0xff);
705 w83627hf_write_value(data, W83781D_REG_BEEP_INTS3,
706 ((data->beep_mask) >> 16) & 0xff);
707 val2 = (data->beep_mask >> 8) & 0x7f;
708 } else { /* We are storing beep_enable */
709 val2 =
710 w83627hf_read_value(data, W83781D_REG_BEEP_INTS2) & 0x7f;
711 data->beep_enable = BEEP_ENABLE_TO_REG(val);
714 w83627hf_write_value(data, W83781D_REG_BEEP_INTS2,
715 val2 | data->beep_enable << 7);
717 mutex_unlock(&data->update_lock);
718 return count;
721 #define sysfs_beep(REG, reg) \
722 static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
724 return show_beep_##reg(dev, attr, buf); \
726 static ssize_t \
727 store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
729 return store_beep_reg(dev, buf, count, BEEP_##REG); \
731 static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \
732 show_regs_beep_##reg, store_regs_beep_##reg);
734 sysfs_beep(ENABLE, enable);
735 sysfs_beep(MASK, mask);
737 static ssize_t
738 show_fan_div_reg(struct device *dev, char *buf, int nr)
740 struct w83627hf_data *data = w83627hf_update_device(dev);
741 return sprintf(buf, "%ld\n",
742 (long) DIV_FROM_REG(data->fan_div[nr - 1]));
745 /* Note: we save and restore the fan minimum here, because its value is
746 determined in part by the fan divisor. This follows the principle of
747 least surprise; the user doesn't expect the fan minimum to change just
748 because the divisor changed. */
749 static ssize_t
750 store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
752 struct w83627hf_data *data = dev_get_drvdata(dev);
753 unsigned long min;
754 u8 reg;
755 unsigned long val = simple_strtoul(buf, NULL, 10);
757 mutex_lock(&data->update_lock);
759 /* Save fan_min */
760 min = FAN_FROM_REG(data->fan_min[nr],
761 DIV_FROM_REG(data->fan_div[nr]));
763 data->fan_div[nr] = DIV_TO_REG(val);
765 reg = (w83627hf_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
766 & (nr==0 ? 0xcf : 0x3f))
767 | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
768 w83627hf_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
770 reg = (w83627hf_read_value(data, W83781D_REG_VBAT)
771 & ~(1 << (5 + nr)))
772 | ((data->fan_div[nr] & 0x04) << (3 + nr));
773 w83627hf_write_value(data, W83781D_REG_VBAT, reg);
775 /* Restore fan_min */
776 data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
777 w83627hf_write_value(data, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
779 mutex_unlock(&data->update_lock);
780 return count;
783 #define sysfs_fan_div(offset) \
784 static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
786 return show_fan_div_reg(dev, buf, offset); \
788 static ssize_t \
789 store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, \
790 const char *buf, size_t count) \
792 return store_fan_div_reg(dev, buf, count, offset - 1); \
794 static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
795 show_regs_fan_div_##offset, store_regs_fan_div_##offset);
797 sysfs_fan_div(1);
798 sysfs_fan_div(2);
799 sysfs_fan_div(3);
801 static ssize_t
802 show_pwm_reg(struct device *dev, char *buf, int nr)
804 struct w83627hf_data *data = w83627hf_update_device(dev);
805 return sprintf(buf, "%ld\n", (long) data->pwm[nr - 1]);
808 static ssize_t
809 store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
811 struct w83627hf_data *data = dev_get_drvdata(dev);
812 u32 val;
814 val = simple_strtoul(buf, NULL, 10);
816 mutex_lock(&data->update_lock);
818 if (data->type == w83627thf) {
819 /* bits 0-3 are reserved in 627THF */
820 data->pwm[nr - 1] = PWM_TO_REG(val) & 0xf0;
821 w83627hf_write_value(data,
822 W836X7HF_REG_PWM(data->type, nr),
823 data->pwm[nr - 1] |
824 (w83627hf_read_value(data,
825 W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
826 } else {
827 data->pwm[nr - 1] = PWM_TO_REG(val);
828 w83627hf_write_value(data,
829 W836X7HF_REG_PWM(data->type, nr),
830 data->pwm[nr - 1]);
833 mutex_unlock(&data->update_lock);
834 return count;
837 #define sysfs_pwm(offset) \
838 static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
840 return show_pwm_reg(dev, buf, offset); \
842 static ssize_t \
843 store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
845 return store_pwm_reg(dev, buf, count, offset); \
847 static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
848 show_regs_pwm_##offset, store_regs_pwm_##offset);
850 sysfs_pwm(1);
851 sysfs_pwm(2);
852 sysfs_pwm(3);
854 static ssize_t
855 show_sensor_reg(struct device *dev, char *buf, int nr)
857 struct w83627hf_data *data = w83627hf_update_device(dev);
858 return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
861 static ssize_t
862 store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
864 struct w83627hf_data *data = dev_get_drvdata(dev);
865 u32 val, tmp;
867 val = simple_strtoul(buf, NULL, 10);
869 mutex_lock(&data->update_lock);
871 switch (val) {
872 case 1: /* PII/Celeron diode */
873 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
874 w83627hf_write_value(data, W83781D_REG_SCFG1,
875 tmp | BIT_SCFG1[nr - 1]);
876 tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
877 w83627hf_write_value(data, W83781D_REG_SCFG2,
878 tmp | BIT_SCFG2[nr - 1]);
879 data->sens[nr - 1] = val;
880 break;
881 case 2: /* 3904 */
882 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
883 w83627hf_write_value(data, W83781D_REG_SCFG1,
884 tmp | BIT_SCFG1[nr - 1]);
885 tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
886 w83627hf_write_value(data, W83781D_REG_SCFG2,
887 tmp & ~BIT_SCFG2[nr - 1]);
888 data->sens[nr - 1] = val;
889 break;
890 case W83781D_DEFAULT_BETA: /* thermistor */
891 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
892 w83627hf_write_value(data, W83781D_REG_SCFG1,
893 tmp & ~BIT_SCFG1[nr - 1]);
894 data->sens[nr - 1] = val;
895 break;
896 default:
897 dev_err(dev,
898 "Invalid sensor type %ld; must be 1, 2, or %d\n",
899 (long) val, W83781D_DEFAULT_BETA);
900 break;
903 mutex_unlock(&data->update_lock);
904 return count;
907 #define sysfs_sensor(offset) \
908 static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
910 return show_sensor_reg(dev, buf, offset); \
912 static ssize_t \
913 store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
915 return store_sensor_reg(dev, buf, count, offset); \
917 static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
918 show_regs_sensor_##offset, store_regs_sensor_##offset);
920 sysfs_sensor(1);
921 sysfs_sensor(2);
922 sysfs_sensor(3);
924 static ssize_t show_name(struct device *dev, struct device_attribute
925 *devattr, char *buf)
927 struct w83627hf_data *data = dev_get_drvdata(dev);
929 return sprintf(buf, "%s\n", data->name);
931 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
933 static int __init w83627hf_find(int sioaddr, unsigned short *addr,
934 struct w83627hf_sio_data *sio_data)
936 int err = -ENODEV;
937 u16 val;
939 static const __initdata char *names[] = {
940 "W83627HF",
941 "W83627THF",
942 "W83697HF",
943 "W83637HF",
944 "W83687THF",
947 REG = sioaddr;
948 VAL = sioaddr + 1;
950 superio_enter();
951 val= superio_inb(DEVID);
952 switch (val) {
953 case W627_DEVID:
954 sio_data->type = w83627hf;
955 break;
956 case W627THF_DEVID:
957 sio_data->type = w83627thf;
958 break;
959 case W697_DEVID:
960 sio_data->type = w83697hf;
961 break;
962 case W637_DEVID:
963 sio_data->type = w83637hf;
964 break;
965 case W687THF_DEVID:
966 sio_data->type = w83687thf;
967 break;
968 default:
969 pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n", val);
970 goto exit;
973 superio_select(W83627HF_LD_HWM);
974 force_addr &= WINB_ALIGNMENT;
975 if (force_addr) {
976 printk(KERN_WARNING DRVNAME ": Forcing address 0x%x\n",
977 force_addr);
978 superio_outb(WINB_BASE_REG, force_addr >> 8);
979 superio_outb(WINB_BASE_REG + 1, force_addr & 0xff);
981 val = (superio_inb(WINB_BASE_REG) << 8) |
982 superio_inb(WINB_BASE_REG + 1);
983 *addr = val & WINB_ALIGNMENT;
984 if (*addr == 0) {
985 printk(KERN_WARNING DRVNAME ": Base address not set, "
986 "skipping\n");
987 goto exit;
990 val = superio_inb(WINB_ACT_REG);
991 if (!(val & 0x01)) {
992 printk(KERN_WARNING DRVNAME ": Enabling HWM logical device\n");
993 superio_outb(WINB_ACT_REG, val | 0x01);
996 err = 0;
997 pr_info(DRVNAME ": Found %s chip at %#x\n",
998 names[sio_data->type], *addr);
1000 exit:
1001 superio_exit();
1002 return err;
1005 static struct attribute *w83627hf_attributes[] = {
1006 &dev_attr_in0_input.attr,
1007 &dev_attr_in0_min.attr,
1008 &dev_attr_in0_max.attr,
1009 &dev_attr_in2_input.attr,
1010 &dev_attr_in2_min.attr,
1011 &dev_attr_in2_max.attr,
1012 &dev_attr_in3_input.attr,
1013 &dev_attr_in3_min.attr,
1014 &dev_attr_in3_max.attr,
1015 &dev_attr_in4_input.attr,
1016 &dev_attr_in4_min.attr,
1017 &dev_attr_in4_max.attr,
1018 &dev_attr_in7_input.attr,
1019 &dev_attr_in7_min.attr,
1020 &dev_attr_in7_max.attr,
1021 &dev_attr_in8_input.attr,
1022 &dev_attr_in8_min.attr,
1023 &dev_attr_in8_max.attr,
1025 &dev_attr_fan1_input.attr,
1026 &dev_attr_fan1_min.attr,
1027 &dev_attr_fan1_div.attr,
1028 &dev_attr_fan2_input.attr,
1029 &dev_attr_fan2_min.attr,
1030 &dev_attr_fan2_div.attr,
1032 &dev_attr_temp1_input.attr,
1033 &dev_attr_temp1_max.attr,
1034 &dev_attr_temp1_max_hyst.attr,
1035 &dev_attr_temp1_type.attr,
1036 &dev_attr_temp2_input.attr,
1037 &dev_attr_temp2_max.attr,
1038 &dev_attr_temp2_max_hyst.attr,
1039 &dev_attr_temp2_type.attr,
1041 &dev_attr_alarms.attr,
1042 &dev_attr_beep_enable.attr,
1043 &dev_attr_beep_mask.attr,
1045 &dev_attr_pwm1.attr,
1046 &dev_attr_pwm2.attr,
1048 &dev_attr_name.attr,
1049 NULL
1052 static const struct attribute_group w83627hf_group = {
1053 .attrs = w83627hf_attributes,
1056 static struct attribute *w83627hf_attributes_opt[] = {
1057 &dev_attr_in1_input.attr,
1058 &dev_attr_in1_min.attr,
1059 &dev_attr_in1_max.attr,
1060 &dev_attr_in5_input.attr,
1061 &dev_attr_in5_min.attr,
1062 &dev_attr_in5_max.attr,
1063 &dev_attr_in6_input.attr,
1064 &dev_attr_in6_min.attr,
1065 &dev_attr_in6_max.attr,
1067 &dev_attr_fan3_input.attr,
1068 &dev_attr_fan3_min.attr,
1069 &dev_attr_fan3_div.attr,
1071 &dev_attr_temp3_input.attr,
1072 &dev_attr_temp3_max.attr,
1073 &dev_attr_temp3_max_hyst.attr,
1074 &dev_attr_temp3_type.attr,
1076 &dev_attr_pwm3.attr,
1078 NULL
1081 static const struct attribute_group w83627hf_group_opt = {
1082 .attrs = w83627hf_attributes_opt,
1085 static int __devinit w83627hf_probe(struct platform_device *pdev)
1087 struct device *dev = &pdev->dev;
1088 struct w83627hf_sio_data *sio_data = dev->platform_data;
1089 struct w83627hf_data *data;
1090 struct resource *res;
1091 int err;
1093 static const char *names[] = {
1094 "w83627hf",
1095 "w83627thf",
1096 "w83697hf",
1097 "w83637hf",
1098 "w83687thf",
1101 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1102 if (!request_region(res->start, WINB_REGION_SIZE, DRVNAME)) {
1103 dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
1104 (unsigned long)res->start,
1105 (unsigned long)(res->start + WINB_REGION_SIZE - 1));
1106 err = -EBUSY;
1107 goto ERROR0;
1110 if (!(data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
1111 err = -ENOMEM;
1112 goto ERROR1;
1114 data->addr = res->start;
1115 data->type = sio_data->type;
1116 data->name = names[sio_data->type];
1117 mutex_init(&data->lock);
1118 mutex_init(&data->update_lock);
1119 platform_set_drvdata(pdev, data);
1121 /* Initialize the chip */
1122 w83627hf_init_device(pdev);
1124 /* A few vars need to be filled upon startup */
1125 data->fan_min[0] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(1));
1126 data->fan_min[1] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(2));
1127 data->fan_min[2] = w83627hf_read_value(data, W83781D_REG_FAN_MIN(3));
1129 /* Register common device attributes */
1130 if ((err = sysfs_create_group(&dev->kobj, &w83627hf_group)))
1131 goto ERROR3;
1133 /* Register chip-specific device attributes */
1134 if (data->type == w83627hf || data->type == w83697hf)
1135 if ((err = device_create_file(dev, &dev_attr_in5_input))
1136 || (err = device_create_file(dev, &dev_attr_in5_min))
1137 || (err = device_create_file(dev, &dev_attr_in5_max))
1138 || (err = device_create_file(dev, &dev_attr_in6_input))
1139 || (err = device_create_file(dev, &dev_attr_in6_min))
1140 || (err = device_create_file(dev, &dev_attr_in6_max)))
1141 goto ERROR4;
1143 if (data->type != w83697hf)
1144 if ((err = device_create_file(dev, &dev_attr_in1_input))
1145 || (err = device_create_file(dev, &dev_attr_in1_min))
1146 || (err = device_create_file(dev, &dev_attr_in1_max))
1147 || (err = device_create_file(dev, &dev_attr_fan3_input))
1148 || (err = device_create_file(dev, &dev_attr_fan3_min))
1149 || (err = device_create_file(dev, &dev_attr_fan3_div))
1150 || (err = device_create_file(dev, &dev_attr_temp3_input))
1151 || (err = device_create_file(dev, &dev_attr_temp3_max))
1152 || (err = device_create_file(dev, &dev_attr_temp3_max_hyst))
1153 || (err = device_create_file(dev, &dev_attr_temp3_type)))
1154 goto ERROR4;
1156 if (data->type != w83697hf && data->vid != 0xff) {
1157 /* Convert VID to voltage based on VRM */
1158 data->vrm = vid_which_vrm();
1160 if ((err = device_create_file(dev, &dev_attr_cpu0_vid))
1161 || (err = device_create_file(dev, &dev_attr_vrm)))
1162 goto ERROR4;
1165 if (data->type == w83627thf || data->type == w83637hf
1166 || data->type == w83687thf)
1167 if ((err = device_create_file(dev, &dev_attr_pwm3)))
1168 goto ERROR4;
1170 data->class_dev = hwmon_device_register(dev);
1171 if (IS_ERR(data->class_dev)) {
1172 err = PTR_ERR(data->class_dev);
1173 goto ERROR4;
1176 return 0;
1178 ERROR4:
1179 sysfs_remove_group(&dev->kobj, &w83627hf_group);
1180 sysfs_remove_group(&dev->kobj, &w83627hf_group_opt);
1181 ERROR3:
1182 kfree(data);
1183 ERROR1:
1184 release_region(res->start, WINB_REGION_SIZE);
1185 ERROR0:
1186 return err;
1189 static int __devexit w83627hf_remove(struct platform_device *pdev)
1191 struct w83627hf_data *data = platform_get_drvdata(pdev);
1192 struct resource *res;
1194 platform_set_drvdata(pdev, NULL);
1195 hwmon_device_unregister(data->class_dev);
1197 sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group);
1198 sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt);
1199 kfree(data);
1201 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1202 release_region(res->start, WINB_REGION_SIZE);
1204 return 0;
1208 static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
1210 int res, word_sized;
1212 mutex_lock(&data->lock);
1213 word_sized = (((reg & 0xff00) == 0x100)
1214 || ((reg & 0xff00) == 0x200))
1215 && (((reg & 0x00ff) == 0x50)
1216 || ((reg & 0x00ff) == 0x53)
1217 || ((reg & 0x00ff) == 0x55));
1218 if (reg & 0xff00) {
1219 outb_p(W83781D_REG_BANK,
1220 data->addr + W83781D_ADDR_REG_OFFSET);
1221 outb_p(reg >> 8,
1222 data->addr + W83781D_DATA_REG_OFFSET);
1224 outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1225 res = inb_p(data->addr + W83781D_DATA_REG_OFFSET);
1226 if (word_sized) {
1227 outb_p((reg & 0xff) + 1,
1228 data->addr + W83781D_ADDR_REG_OFFSET);
1229 res =
1230 (res << 8) + inb_p(data->addr +
1231 W83781D_DATA_REG_OFFSET);
1233 if (reg & 0xff00) {
1234 outb_p(W83781D_REG_BANK,
1235 data->addr + W83781D_ADDR_REG_OFFSET);
1236 outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
1238 mutex_unlock(&data->lock);
1239 return res;
1242 static int __devinit w83627thf_read_gpio5(struct platform_device *pdev)
1244 int res = 0xff, sel;
1246 superio_enter();
1247 superio_select(W83627HF_LD_GPIO5);
1249 /* Make sure these GPIO pins are enabled */
1250 if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) {
1251 dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
1252 goto exit;
1255 /* Make sure the pins are configured for input
1256 There must be at least five (VRM 9), and possibly 6 (VRM 10) */
1257 sel = superio_inb(W83627THF_GPIO5_IOSR) & 0x3f;
1258 if ((sel & 0x1f) != 0x1f) {
1259 dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
1260 "function\n");
1261 goto exit;
1264 dev_info(&pdev->dev, "Reading VID from GPIO5\n");
1265 res = superio_inb(W83627THF_GPIO5_DR) & sel;
1267 exit:
1268 superio_exit();
1269 return res;
1272 static int __devinit w83687thf_read_vid(struct platform_device *pdev)
1274 int res = 0xff;
1276 superio_enter();
1277 superio_select(W83627HF_LD_HWM);
1279 /* Make sure these GPIO pins are enabled */
1280 if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) {
1281 dev_dbg(&pdev->dev, "VID disabled, no VID function\n");
1282 goto exit;
1285 /* Make sure the pins are configured for input */
1286 if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) {
1287 dev_dbg(&pdev->dev, "VID configured as output, "
1288 "no VID function\n");
1289 goto exit;
1292 res = superio_inb(W83687THF_VID_DATA) & 0x3f;
1294 exit:
1295 superio_exit();
1296 return res;
1299 static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value)
1301 int word_sized;
1303 mutex_lock(&data->lock);
1304 word_sized = (((reg & 0xff00) == 0x100)
1305 || ((reg & 0xff00) == 0x200))
1306 && (((reg & 0x00ff) == 0x53)
1307 || ((reg & 0x00ff) == 0x55));
1308 if (reg & 0xff00) {
1309 outb_p(W83781D_REG_BANK,
1310 data->addr + W83781D_ADDR_REG_OFFSET);
1311 outb_p(reg >> 8,
1312 data->addr + W83781D_DATA_REG_OFFSET);
1314 outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
1315 if (word_sized) {
1316 outb_p(value >> 8,
1317 data->addr + W83781D_DATA_REG_OFFSET);
1318 outb_p((reg & 0xff) + 1,
1319 data->addr + W83781D_ADDR_REG_OFFSET);
1321 outb_p(value & 0xff,
1322 data->addr + W83781D_DATA_REG_OFFSET);
1323 if (reg & 0xff00) {
1324 outb_p(W83781D_REG_BANK,
1325 data->addr + W83781D_ADDR_REG_OFFSET);
1326 outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
1328 mutex_unlock(&data->lock);
1329 return 0;
1332 static void __devinit w83627hf_init_device(struct platform_device *pdev)
1334 struct w83627hf_data *data = platform_get_drvdata(pdev);
1335 int i;
1336 enum chips type = data->type;
1337 u8 tmp;
1339 if (reset) {
1340 /* Resetting the chip has been the default for a long time,
1341 but repeatedly caused problems (fans going to full
1342 speed...) so it is now optional. It might even go away if
1343 nobody reports it as being useful, as I see very little
1344 reason why this would be needed at all. */
1345 dev_info(&pdev->dev, "If reset=1 solved a problem you were "
1346 "having, please report!\n");
1348 /* save this register */
1349 i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG);
1350 /* Reset all except Watchdog values and last conversion values
1351 This sets fan-divs to 2, among others */
1352 w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80);
1353 /* Restore the register and disable power-on abnormal beep.
1354 This saves FAN 1/2/3 input/output values set by BIOS. */
1355 w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1356 /* Disable master beep-enable (reset turns it on).
1357 Individual beeps should be reset to off but for some reason
1358 disabling this bit helps some people not get beeped */
1359 w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0);
1362 /* Minimize conflicts with other winbond i2c-only clients... */
1363 /* disable i2c subclients... how to disable main i2c client?? */
1364 /* force i2c address to relatively uncommon address */
1365 w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89);
1366 w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c);
1368 /* Read VID only once */
1369 if (type == w83627hf || type == w83637hf) {
1370 int lo = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1371 int hi = w83627hf_read_value(data, W83781D_REG_CHIPID);
1372 data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
1373 } else if (type == w83627thf) {
1374 data->vid = w83627thf_read_gpio5(pdev);
1375 } else if (type == w83687thf) {
1376 data->vid = w83687thf_read_vid(pdev);
1379 /* Read VRM & OVT Config only once */
1380 if (type == w83627thf || type == w83637hf || type == w83687thf) {
1381 data->vrm_ovt =
1382 w83627hf_read_value(data, W83627THF_REG_VRM_OVT_CFG);
1385 tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
1386 for (i = 1; i <= 3; i++) {
1387 if (!(tmp & BIT_SCFG1[i - 1])) {
1388 data->sens[i - 1] = W83781D_DEFAULT_BETA;
1389 } else {
1390 if (w83627hf_read_value
1391 (data,
1392 W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1393 data->sens[i - 1] = 1;
1394 else
1395 data->sens[i - 1] = 2;
1397 if ((type == w83697hf) && (i == 2))
1398 break;
1401 if(init) {
1402 /* Enable temp2 */
1403 tmp = w83627hf_read_value(data, W83781D_REG_TEMP2_CONFIG);
1404 if (tmp & 0x01) {
1405 dev_warn(&pdev->dev, "Enabling temp2, readings "
1406 "might not make sense\n");
1407 w83627hf_write_value(data, W83781D_REG_TEMP2_CONFIG,
1408 tmp & 0xfe);
1411 /* Enable temp3 */
1412 if (type != w83697hf) {
1413 tmp = w83627hf_read_value(data,
1414 W83781D_REG_TEMP3_CONFIG);
1415 if (tmp & 0x01) {
1416 dev_warn(&pdev->dev, "Enabling temp3, "
1417 "readings might not make sense\n");
1418 w83627hf_write_value(data,
1419 W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1424 /* Start monitoring */
1425 w83627hf_write_value(data, W83781D_REG_CONFIG,
1426 (w83627hf_read_value(data,
1427 W83781D_REG_CONFIG) & 0xf7)
1428 | 0x01);
1431 static struct w83627hf_data *w83627hf_update_device(struct device *dev)
1433 struct w83627hf_data *data = dev_get_drvdata(dev);
1434 int i;
1436 mutex_lock(&data->update_lock);
1438 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1439 || !data->valid) {
1440 for (i = 0; i <= 8; i++) {
1441 /* skip missing sensors */
1442 if (((data->type == w83697hf) && (i == 1)) ||
1443 ((data->type != w83627hf && data->type != w83697hf)
1444 && (i == 5 || i == 6)))
1445 continue;
1446 data->in[i] =
1447 w83627hf_read_value(data, W83781D_REG_IN(i));
1448 data->in_min[i] =
1449 w83627hf_read_value(data,
1450 W83781D_REG_IN_MIN(i));
1451 data->in_max[i] =
1452 w83627hf_read_value(data,
1453 W83781D_REG_IN_MAX(i));
1455 for (i = 1; i <= 3; i++) {
1456 data->fan[i - 1] =
1457 w83627hf_read_value(data, W83781D_REG_FAN(i));
1458 data->fan_min[i - 1] =
1459 w83627hf_read_value(data,
1460 W83781D_REG_FAN_MIN(i));
1462 for (i = 1; i <= 3; i++) {
1463 u8 tmp = w83627hf_read_value(data,
1464 W836X7HF_REG_PWM(data->type, i));
1465 /* bits 0-3 are reserved in 627THF */
1466 if (data->type == w83627thf)
1467 tmp &= 0xf0;
1468 data->pwm[i - 1] = tmp;
1469 if(i == 2 &&
1470 (data->type == w83627hf || data->type == w83697hf))
1471 break;
1474 data->temp = w83627hf_read_value(data, W83781D_REG_TEMP(1));
1475 data->temp_max =
1476 w83627hf_read_value(data, W83781D_REG_TEMP_OVER(1));
1477 data->temp_max_hyst =
1478 w83627hf_read_value(data, W83781D_REG_TEMP_HYST(1));
1479 data->temp_add[0] =
1480 w83627hf_read_value(data, W83781D_REG_TEMP(2));
1481 data->temp_max_add[0] =
1482 w83627hf_read_value(data, W83781D_REG_TEMP_OVER(2));
1483 data->temp_max_hyst_add[0] =
1484 w83627hf_read_value(data, W83781D_REG_TEMP_HYST(2));
1485 if (data->type != w83697hf) {
1486 data->temp_add[1] =
1487 w83627hf_read_value(data, W83781D_REG_TEMP(3));
1488 data->temp_max_add[1] =
1489 w83627hf_read_value(data, W83781D_REG_TEMP_OVER(3));
1490 data->temp_max_hyst_add[1] =
1491 w83627hf_read_value(data, W83781D_REG_TEMP_HYST(3));
1494 i = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
1495 data->fan_div[0] = (i >> 4) & 0x03;
1496 data->fan_div[1] = (i >> 6) & 0x03;
1497 if (data->type != w83697hf) {
1498 data->fan_div[2] = (w83627hf_read_value(data,
1499 W83781D_REG_PIN) >> 6) & 0x03;
1501 i = w83627hf_read_value(data, W83781D_REG_VBAT);
1502 data->fan_div[0] |= (i >> 3) & 0x04;
1503 data->fan_div[1] |= (i >> 4) & 0x04;
1504 if (data->type != w83697hf)
1505 data->fan_div[2] |= (i >> 5) & 0x04;
1506 data->alarms =
1507 w83627hf_read_value(data, W83781D_REG_ALARM1) |
1508 (w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) |
1509 (w83627hf_read_value(data, W83781D_REG_ALARM3) << 16);
1510 i = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
1511 data->beep_enable = i >> 7;
1512 data->beep_mask = ((i & 0x7f) << 8) |
1513 w83627hf_read_value(data, W83781D_REG_BEEP_INTS1) |
1514 w83627hf_read_value(data, W83781D_REG_BEEP_INTS3) << 16;
1515 data->last_updated = jiffies;
1516 data->valid = 1;
1519 mutex_unlock(&data->update_lock);
1521 return data;
1524 static int __init w83627hf_device_add(unsigned short address,
1525 const struct w83627hf_sio_data *sio_data)
1527 struct resource res = {
1528 .start = address + WINB_REGION_OFFSET,
1529 .end = address + WINB_REGION_OFFSET + WINB_REGION_SIZE - 1,
1530 .name = DRVNAME,
1531 .flags = IORESOURCE_IO,
1533 int err;
1535 pdev = platform_device_alloc(DRVNAME, address);
1536 if (!pdev) {
1537 err = -ENOMEM;
1538 printk(KERN_ERR DRVNAME ": Device allocation failed\n");
1539 goto exit;
1542 err = platform_device_add_resources(pdev, &res, 1);
1543 if (err) {
1544 printk(KERN_ERR DRVNAME ": Device resource addition failed "
1545 "(%d)\n", err);
1546 goto exit_device_put;
1549 pdev->dev.platform_data = kmalloc(sizeof(struct w83627hf_sio_data),
1550 GFP_KERNEL);
1551 if (!pdev->dev.platform_data) {
1552 err = -ENOMEM;
1553 printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
1554 goto exit_device_put;
1556 memcpy(pdev->dev.platform_data, sio_data,
1557 sizeof(struct w83627hf_sio_data));
1559 err = platform_device_add(pdev);
1560 if (err) {
1561 printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
1562 err);
1563 goto exit_device_put;
1566 return 0;
1568 exit_device_put:
1569 platform_device_put(pdev);
1570 exit:
1571 return err;
1574 static int __init sensors_w83627hf_init(void)
1576 int err;
1577 unsigned short address;
1578 struct w83627hf_sio_data sio_data;
1580 if (w83627hf_find(0x2e, &address, &sio_data)
1581 && w83627hf_find(0x4e, &address, &sio_data))
1582 return -ENODEV;
1584 err = platform_driver_register(&w83627hf_driver);
1585 if (err)
1586 goto exit;
1588 /* Sets global pdev as a side effect */
1589 err = w83627hf_device_add(address, &sio_data);
1590 if (err)
1591 goto exit_driver;
1593 return 0;
1595 exit_driver:
1596 platform_driver_unregister(&w83627hf_driver);
1597 exit:
1598 return err;
1601 static void __exit sensors_w83627hf_exit(void)
1603 platform_device_unregister(pdev);
1604 platform_driver_unregister(&w83627hf_driver);
1607 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
1608 "Philip Edelbrock <phil@netroedge.com>, "
1609 "and Mark Studebaker <mdsxyz123@yahoo.com>");
1610 MODULE_DESCRIPTION("W83627HF driver");
1611 MODULE_LICENSE("GPL");
1613 module_init(sensors_w83627hf_init);
1614 module_exit(sensors_w83627hf_exit);