Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
[linux-2.6.22.y-op.git] / include / asm-v850 / teg.h
blobacc8c7d953292d6d1b246dd576f12d60a18fc295
1 /*
2 * include/asm-v850/teg.h -- NB85E-TEG cpu chip
4 * Copyright (C) 2001,02,03 NEC Electronics Corporation
5 * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
7 * This file is subject to the terms and conditions of the GNU General
8 * Public License. See the file COPYING in the main directory of this
9 * archive for more details.
11 * Written by Miles Bader <miles@gnu.org>
14 #ifndef __V850_TEG_H__
15 #define __V850_TEG_H__
18 /* The TEG uses the V850E cpu core. */
19 #include <asm/v850e.h>
20 #include <asm/v850e_cache.h>
23 #define CPU_MODEL "v850e/nb85e-teg"
24 #define CPU_MODEL_LONG "NEC V850E/NB85E TEG"
27 /* For <asm/entry.h> */
28 /* We use on-chip RAM, for a few miscellaneous variables that must be
29 accessible using a load instruction relative to R0. On the NB85E/TEG,
30 There's 60KB of iRAM starting at 0xFFFF0000, however we need the base
31 address to be addressable by a 16-bit signed offset, so we only use the
32 second half of it starting from 0xFFFF8000. */
33 #define R0_RAM_ADDR 0xFFFF8000
36 /* Hardware-specific interrupt numbers (in the kernel IRQ namespace).
37 Some of these are parameterized even though there's only a single
38 interrupt, for compatibility with some generic code that works on other
39 processor models. */
40 #define IRQ_INTCMD(n) 6 /* interval timer interrupt */
41 #define IRQ_INTCMD_NUM 1
42 #define IRQ_INTSER(n) 16 /* UART reception error */
43 #define IRQ_INTSER_NUM 1
44 #define IRQ_INTSR(n) 17 /* UART reception completion */
45 #define IRQ_INTSR_NUM 1
46 #define IRQ_INTST(n) 18 /* UART transmission completion */
47 #define IRQ_INTST_NUM 1
49 /* For <asm/irq.h> */
50 #define NUM_CPU_IRQS 64
53 /* TEG UART details. */
54 #define V850E_UART_BASE_ADDR(n) (0xFFFFF600 + 0x10 * (n))
55 #define V850E_UART_ASIM_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x0)
56 #define V850E_UART_ASIS_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x2)
57 #define V850E_UART_ASIF_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x4)
58 #define V850E_UART_CKSR_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x6)
59 #define V850E_UART_BRGC_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x8)
60 #define V850E_UART_TXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xA)
61 #define V850E_UART_RXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xC)
62 #define V850E_UART_NUM_CHANNELS 1
63 #define V850E_UART_BASE_FREQ CPU_CLOCK_FREQ
64 /* This is a function that gets called before configuring the UART. */
65 #define V850E_UART_PRE_CONFIGURE teg_uart_pre_configure
66 #ifndef __ASSEMBLY__
67 extern void teg_uart_pre_configure (unsigned chan,
68 unsigned cflags, unsigned baud);
69 #endif
72 /* The TEG RTPU. */
73 #define V850E_RTPU_BASE_ADDR 0xFFFFF210
76 /* TEG series timer D details. */
77 #define V850E_TIMER_D_BASE_ADDR 0xFFFFF210
78 #define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
79 #define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
80 #define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x8)
81 #define V850E_TIMER_D_BASE_FREQ CPU_CLOCK_FREQ
84 /* `Interrupt Source Select' control register. */
85 #define TEG_ISS_ADDR 0xFFFFF7FA
86 #define TEG_ISS (*(volatile u8 *)TEG_ISS_ADDR)
88 /* Port 0 I/O register (bits 0-3 used). */
89 #define TEG_PORT0_IO_ADDR 0xFFFFF7F2
90 #define TEG_PORT0_IO (*(volatile u8 *)TEG_PORT0_IO_ADDR)
91 /* Port 0 control register (bits 0-3 control mode, 0 = output, 1 = input). */
92 #define TEG_PORT0_PM_ADDR 0xFFFFF7F4
93 #define TEG_PORT0_PM (*(volatile u8 *)TEG_PORT0_PM_ADDR)
96 #ifndef __ASSEMBLY__
97 extern void teg_init_irqs (void);
98 #endif
101 #endif /* __V850_TEG_H__ */