include/asm-v850/anna.h

   1 /*
   2  * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board
   3  *
   4  *  Copyright (C) 2001,02,03  NEC Electronics Corporation
   5  *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
   6  *
   7  * This file is subject to the terms and conditions of the GNU General
   8  * Public License.  See the file COPYING in the main directory of this
   9  * archive for more details.
  10  *
  11  * Written by Miles Bader <miles@gnu.org>
  12  */
  13
  14 #ifndef __V850_ANNA_H__
  15 #define __V850_ANNA_H__
  16
  17 #include <asm/v850e2.h>         /* Based on V850E2 core.  */
  18
  19
  20 #define CPU_MODEL       "v850e2/anna"
  21 #define CPU_MODEL_LONG  "NEC V850E2/Anna"
  22 #define PLATFORM        "anna"
  23 #define PLATFORM_LONG   "NEC/Midas lab V850E2/Anna evaluation board"
  24
  25 #define CPU_CLOCK_FREQ  200000000 /*  200MHz */
  26 #define SYS_CLOCK_FREQ   33300000 /* 33.3MHz */
  27
  28
  29 /* 1MB of static RAM.  This memory is mirrored 64 times.  */
  30 #define SRAM_ADDR       0x04000000
  31 #define SRAM_SIZE       0x00100000 /* 1MB */
  32 /* 64MB of DRAM.  */
  33 #define SDRAM_ADDR      0x08000000
  34 #define SDRAM_SIZE      0x04000000 /* 64MB */
  35
  36
  37 /* For <asm/page.h> */
  38 #define PAGE_OFFSET     SRAM_ADDR
  39
  40 /* We use on-chip RAM, for a few miscellaneous variables that must be
  41    accessible using a load instruction relative to R0.  The Anna chip has
  42    128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored
  43    every 128K, so we can use the `last mirror' (except for the portion at
  44    the top which is overridden by I/O space).  In addition, the early
  45    sample chip we're using has lots of memory errors in the dLB ram, so we
  46    use a specially chosen location that has at least 20 bytes of contiguous
  47    valid memory (xxxF0020 - xxxF003F).  */
  48 #define R0_RAM_ADDR                     0xFFFF8020
  49
  50
  51 /* Anna specific control registers.  */
  52 #define ANNA_ILBEN_ADDR                 0xFFFFF7F2
  53 #define ANNA_ILBEN                      (*(volatile u16 *)ANNA_ILBEN_ADDR)
  54
  55
  56 /* I/O port P0-P3. */
  57 /* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
  58 #define ANNA_PORT_IO_ADDR(n)            (0xFFFFF400 + (n) * 2)
  59 #define ANNA_PORT_IO(n)                 (*(volatile u8 *)ANNA_PORT_IO_ADDR(n))
  60 /* Port mode (for direct I/O, 0 = output, 1 = input).  */
  61 #define ANNA_PORT_PM_ADDR(n)            (0xFFFFF410 + (n) * 2)
  62 #define ANNA_PORT_PM(n)                 (*(volatile u8 *)ANNA_PORT_PM_ADDR(n))
  63
  64
  65 /* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
  66 #define IRQ_INTP(n)     (n)     /* Pnnn (pin) interrupts 0-15 */
  67 #define IRQ_INTP_NUM    16
  68 #define IRQ_INTOV(n)    (0x10 + (n)) /* 0-2 */
  69 #define IRQ_INTOV_NUM   2
  70 #define IRQ_INTCCC(n)   (0x12 + (n))
  71 #define IRQ_INTCCC_NUM  4
  72 #define IRQ_INTCMD(n)   (0x16 + (n)) /* interval timer interrupts 0-5 */
  73 #define IRQ_INTCMD_NUM  6
  74 #define IRQ_INTDMA(n)   (0x1C + (n)) /* DMA interrupts 0-3 */
  75 #define IRQ_INTDMA_NUM  4
  76 #define IRQ_INTDMXER    0x20
  77 #define IRQ_INTSRE(n)   (0x21 + (n)*3) /* UART 0-1 reception error */
  78 #define IRQ_INTSRE_NUM  2
  79 #define IRQ_INTSR(n)    (0x22 + (n)*3) /* UART 0-1 reception completion */
  80 #define IRQ_INTSR_NUM   2
  81 #define IRQ_INTST(n)    (0x23 + (n)*3) /* UART 0-1 transmission completion */
  82 #define IRQ_INTST_NUM   2
  83
  84 #define NUM_CPU_IRQS    64
  85
  86 #ifndef __ASSEMBLY__
  87 /* Initialize chip interrupts.  */
  88 extern void anna_init_irqs (void);
  89 #endif
  90
  91
  92 /* Anna UART details (basically the same as the V850E/MA1, but 2 channels).  */
  93 #define V850E_UART_NUM_CHANNELS         2
  94 #define V850E_UART_BASE_FREQ            (SYS_CLOCK_FREQ / 2)
  95 #define V850E_UART_CHIP_NAME            "V850E2/NA85E2A"
  96
  97 /* This is the UART channel that's actually connected on the board.  */
  98 #define V850E_UART_CONSOLE_CHANNEL      1
  99
 100 /* This is a function that gets called before configuring the UART.  */
 101 #define V850E_UART_PRE_CONFIGURE        anna_uart_pre_configure
 102 #ifndef __ASSEMBLY__
 103 extern void anna_uart_pre_configure (unsigned chan,
 104                                      unsigned cflags, unsigned baud);
 105 #endif
 106
 107 /* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
 108
 109 /* CTS for UART channel 1 is pin P37 (bit 7 of port 3).  */
 110 #define V850E_UART_CTS(chan)    ((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1)
 111 /* RTS for UART channel 1 is pin P07 (bit 7 of port 0).  */
 112 #define V850E_UART_SET_RTS(chan, val)                                         \
 113    do {                                                                       \
 114            if (chan == 1) {                                                   \
 115                    unsigned old = ANNA_PORT_IO(0);                            \
 116                    if (val)                                                   \
 117                            ANNA_PORT_IO(0) = old & ~0x80;                     \
 118                    else                                                       \
 119                            ANNA_PORT_IO(0) = old | 0x80;                      \
 120            }                                                                  \
 121    } while (0)
 122
 123
 124 /* Timer C details.  */
 125 #define V850E_TIMER_C_BASE_ADDR         0xFFFFF600
 126
 127 /* Timer D details (the Anna actually has 5 of these; should change later). */
 128 #define V850E_TIMER_D_BASE_ADDR         0xFFFFF540
 129 #define V850E_TIMER_D_TMD_BASE_ADDR     (V850E_TIMER_D_BASE_ADDR + 0x0)
 130 #define V850E_TIMER_D_CMD_BASE_ADDR     (V850E_TIMER_D_BASE_ADDR + 0x2)
 131 #define V850E_TIMER_D_TMCD_BASE_ADDR    (V850E_TIMER_D_BASE_ADDR + 0x4)
 132
 133 #define V850E_TIMER_D_BASE_FREQ         SYS_CLOCK_FREQ
 134 #define V850E_TIMER_D_TMCD_CS_MIN       1 /* min 2^1 divider */
 135
 136
 137 /* For <asm/param.h> */
 138 #ifndef HZ
 139 #define HZ      100
 140 #endif
 141
 142
 143 #endif /* __V850_ANNA_H__ */