synclink_gt: add compat_ioctl
[linux-2.6.22.y-op.git] / drivers / char / synclink_gt.c
blob02b49bc000284028377f915dc39248ef71445d58
1 /*
2 * $Id: synclink_gt.c,v 4.36 2006/08/28 20:47:14 paulkf Exp $
4 * Device driver for Microgate SyncLink GT serial adapters.
6 * written by Paul Fulghum for Microgate Corporation
7 * paulkf@microgate.com
9 * Microgate and SyncLink are trademarks of Microgate Corporation
11 * This code is released under the GNU General Public License (GPL)
13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
16 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
17 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
18 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
19 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
21 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
22 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
23 * OF THE POSSIBILITY OF SUCH DAMAGE.
27 * DEBUG OUTPUT DEFINITIONS
29 * uncomment lines below to enable specific types of debug output
31 * DBGINFO information - most verbose output
32 * DBGERR serious errors
33 * DBGBH bottom half service routine debugging
34 * DBGISR interrupt service routine debugging
35 * DBGDATA output receive and transmit data
36 * DBGTBUF output transmit DMA buffers and registers
37 * DBGRBUF output receive DMA buffers and registers
40 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
41 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
42 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
43 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
44 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
45 //#define DBGTBUF(info) dump_tbufs(info)
46 //#define DBGRBUF(info) dump_rbufs(info)
49 #include <linux/module.h>
50 #include <linux/version.h>
51 #include <linux/errno.h>
52 #include <linux/signal.h>
53 #include <linux/sched.h>
54 #include <linux/timer.h>
55 #include <linux/interrupt.h>
56 #include <linux/pci.h>
57 #include <linux/tty.h>
58 #include <linux/tty_flip.h>
59 #include <linux/serial.h>
60 #include <linux/major.h>
61 #include <linux/string.h>
62 #include <linux/fcntl.h>
63 #include <linux/ptrace.h>
64 #include <linux/ioport.h>
65 #include <linux/mm.h>
66 #include <linux/slab.h>
67 #include <linux/netdevice.h>
68 #include <linux/vmalloc.h>
69 #include <linux/init.h>
70 #include <linux/delay.h>
71 #include <linux/ioctl.h>
72 #include <linux/termios.h>
73 #include <linux/bitops.h>
74 #include <linux/workqueue.h>
75 #include <linux/hdlc.h>
77 #include <asm/system.h>
78 #include <asm/io.h>
79 #include <asm/irq.h>
80 #include <asm/dma.h>
81 #include <asm/types.h>
82 #include <asm/uaccess.h>
84 #include "linux/synclink.h"
86 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
87 #define SYNCLINK_GENERIC_HDLC 1
88 #else
89 #define SYNCLINK_GENERIC_HDLC 0
90 #endif
93 * module identification
95 static char *driver_name = "SyncLink GT";
96 static char *driver_version = "$Revision: 4.36 $";
97 static char *tty_driver_name = "synclink_gt";
98 static char *tty_dev_prefix = "ttySLG";
99 MODULE_LICENSE("GPL");
100 #define MGSL_MAGIC 0x5401
101 #define MAX_DEVICES 32
103 static struct pci_device_id pci_table[] = {
104 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
105 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
106 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
107 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
108 {0,}, /* terminate list */
110 MODULE_DEVICE_TABLE(pci, pci_table);
112 static int init_one(struct pci_dev *dev,const struct pci_device_id *ent);
113 static void remove_one(struct pci_dev *dev);
114 static struct pci_driver pci_driver = {
115 .name = "synclink_gt",
116 .id_table = pci_table,
117 .probe = init_one,
118 .remove = __devexit_p(remove_one),
121 static int pci_registered;
124 * module configuration and status
126 static struct slgt_info *slgt_device_list;
127 static int slgt_device_count;
129 static int ttymajor;
130 static int debug_level;
131 static int maxframe[MAX_DEVICES];
132 static int dosyncppp[MAX_DEVICES];
134 module_param(ttymajor, int, 0);
135 module_param(debug_level, int, 0);
136 module_param_array(maxframe, int, NULL, 0);
137 module_param_array(dosyncppp, int, NULL, 0);
139 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
140 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
141 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
142 MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable");
145 * tty support and callbacks
147 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
149 static struct tty_driver *serial_driver;
151 static int open(struct tty_struct *tty, struct file * filp);
152 static void close(struct tty_struct *tty, struct file * filp);
153 static void hangup(struct tty_struct *tty);
154 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
156 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
157 static void put_char(struct tty_struct *tty, unsigned char ch);
158 static void send_xchar(struct tty_struct *tty, char ch);
159 static void wait_until_sent(struct tty_struct *tty, int timeout);
160 static int write_room(struct tty_struct *tty);
161 static void flush_chars(struct tty_struct *tty);
162 static void flush_buffer(struct tty_struct *tty);
163 static void tx_hold(struct tty_struct *tty);
164 static void tx_release(struct tty_struct *tty);
166 static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
167 static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
168 static int chars_in_buffer(struct tty_struct *tty);
169 static void throttle(struct tty_struct * tty);
170 static void unthrottle(struct tty_struct * tty);
171 static void set_break(struct tty_struct *tty, int break_state);
174 * generic HDLC support and callbacks
176 #if SYNCLINK_GENERIC_HDLC
177 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
178 static void hdlcdev_tx_done(struct slgt_info *info);
179 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
180 static int hdlcdev_init(struct slgt_info *info);
181 static void hdlcdev_exit(struct slgt_info *info);
182 #endif
186 * device specific structures, macros and functions
189 #define SLGT_MAX_PORTS 4
190 #define SLGT_REG_SIZE 256
193 * conditional wait facility
195 struct cond_wait {
196 struct cond_wait *next;
197 wait_queue_head_t q;
198 wait_queue_t wait;
199 unsigned int data;
201 static void init_cond_wait(struct cond_wait *w, unsigned int data);
202 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
203 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
204 static void flush_cond_wait(struct cond_wait **head);
207 * DMA buffer descriptor and access macros
209 struct slgt_desc
211 unsigned short count;
212 unsigned short status;
213 unsigned int pbuf; /* physical address of data buffer */
214 unsigned int next; /* physical address of next descriptor */
216 /* driver book keeping */
217 char *buf; /* virtual address of data buffer */
218 unsigned int pdesc; /* physical address of this descriptor */
219 dma_addr_t buf_dma_addr;
222 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
223 #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
224 #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
225 #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
226 #define desc_count(a) (le16_to_cpu((a).count))
227 #define desc_status(a) (le16_to_cpu((a).status))
228 #define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
229 #define desc_eof(a) (le16_to_cpu((a).status) & BIT2)
230 #define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1)
231 #define desc_abort(a) (le16_to_cpu((a).status) & BIT0)
232 #define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3)
234 struct _input_signal_events {
235 int ri_up;
236 int ri_down;
237 int dsr_up;
238 int dsr_down;
239 int dcd_up;
240 int dcd_down;
241 int cts_up;
242 int cts_down;
246 * device instance data structure
248 struct slgt_info {
249 void *if_ptr; /* General purpose pointer (used by SPPP) */
251 struct slgt_info *next_device; /* device list link */
253 int magic;
254 int flags;
256 char device_name[25];
257 struct pci_dev *pdev;
259 int port_count; /* count of ports on adapter */
260 int adapter_num; /* adapter instance number */
261 int port_num; /* port instance number */
263 /* array of pointers to port contexts on this adapter */
264 struct slgt_info *port_array[SLGT_MAX_PORTS];
266 int count; /* count of opens */
267 int line; /* tty line instance number */
268 unsigned short close_delay;
269 unsigned short closing_wait; /* time to wait before closing */
271 struct mgsl_icount icount;
273 struct tty_struct *tty;
274 int timeout;
275 int x_char; /* xon/xoff character */
276 int blocked_open; /* # of blocked opens */
277 unsigned int read_status_mask;
278 unsigned int ignore_status_mask;
280 wait_queue_head_t open_wait;
281 wait_queue_head_t close_wait;
283 wait_queue_head_t status_event_wait_q;
284 wait_queue_head_t event_wait_q;
285 struct timer_list tx_timer;
286 struct timer_list rx_timer;
288 unsigned int gpio_present;
289 struct cond_wait *gpio_wait_q;
291 spinlock_t lock; /* spinlock for synchronizing with ISR */
293 struct work_struct task;
294 u32 pending_bh;
295 int bh_requested;
296 int bh_running;
298 int isr_overflow;
299 int irq_requested; /* nonzero if IRQ requested */
300 int irq_occurred; /* for diagnostics use */
302 /* device configuration */
304 unsigned int bus_type;
305 unsigned int irq_level;
306 unsigned long irq_flags;
308 unsigned char __iomem * reg_addr; /* memory mapped registers address */
309 u32 phys_reg_addr;
310 int reg_addr_requested;
312 MGSL_PARAMS params; /* communications parameters */
313 u32 idle_mode;
314 u32 max_frame_size; /* as set by device config */
316 unsigned int raw_rx_size;
317 unsigned int if_mode;
319 /* device status */
321 int rx_enabled;
322 int rx_restart;
324 int tx_enabled;
325 int tx_active;
327 unsigned char signals; /* serial signal states */
328 int init_error; /* initialization error */
330 unsigned char *tx_buf;
331 int tx_count;
333 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
334 char char_buf[MAX_ASYNC_BUFFER_SIZE];
335 BOOLEAN drop_rts_on_tx_done;
336 struct _input_signal_events input_signal_events;
338 int dcd_chkcount; /* check counts to prevent */
339 int cts_chkcount; /* too many IRQs if a signal */
340 int dsr_chkcount; /* is floating */
341 int ri_chkcount;
343 char *bufs; /* virtual address of DMA buffer lists */
344 dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
346 unsigned int rbuf_count;
347 struct slgt_desc *rbufs;
348 unsigned int rbuf_current;
349 unsigned int rbuf_index;
351 unsigned int tbuf_count;
352 struct slgt_desc *tbufs;
353 unsigned int tbuf_current;
354 unsigned int tbuf_start;
356 unsigned char *tmp_rbuf;
357 unsigned int tmp_rbuf_count;
359 /* SPPP/Cisco HDLC device parts */
361 int netcount;
362 int dosyncppp;
363 spinlock_t netlock;
364 #if SYNCLINK_GENERIC_HDLC
365 struct net_device *netdev;
366 #endif
370 static MGSL_PARAMS default_params = {
371 .mode = MGSL_MODE_HDLC,
372 .loopback = 0,
373 .flags = HDLC_FLAG_UNDERRUN_ABORT15,
374 .encoding = HDLC_ENCODING_NRZI_SPACE,
375 .clock_speed = 0,
376 .addr_filter = 0xff,
377 .crc_type = HDLC_CRC_16_CCITT,
378 .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
379 .preamble = HDLC_PREAMBLE_PATTERN_NONE,
380 .data_rate = 9600,
381 .data_bits = 8,
382 .stop_bits = 1,
383 .parity = ASYNC_PARITY_NONE
387 #define BH_RECEIVE 1
388 #define BH_TRANSMIT 2
389 #define BH_STATUS 4
390 #define IO_PIN_SHUTDOWN_LIMIT 100
392 #define DMABUFSIZE 256
393 #define DESC_LIST_SIZE 4096
395 #define MASK_PARITY BIT1
396 #define MASK_FRAMING BIT0
397 #define MASK_BREAK BIT14
398 #define MASK_OVERRUN BIT4
400 #define GSR 0x00 /* global status */
401 #define JCR 0x04 /* JTAG control */
402 #define IODR 0x08 /* GPIO direction */
403 #define IOER 0x0c /* GPIO interrupt enable */
404 #define IOVR 0x10 /* GPIO value */
405 #define IOSR 0x14 /* GPIO interrupt status */
406 #define TDR 0x80 /* tx data */
407 #define RDR 0x80 /* rx data */
408 #define TCR 0x82 /* tx control */
409 #define TIR 0x84 /* tx idle */
410 #define TPR 0x85 /* tx preamble */
411 #define RCR 0x86 /* rx control */
412 #define VCR 0x88 /* V.24 control */
413 #define CCR 0x89 /* clock control */
414 #define BDR 0x8a /* baud divisor */
415 #define SCR 0x8c /* serial control */
416 #define SSR 0x8e /* serial status */
417 #define RDCSR 0x90 /* rx DMA control/status */
418 #define TDCSR 0x94 /* tx DMA control/status */
419 #define RDDAR 0x98 /* rx DMA descriptor address */
420 #define TDDAR 0x9c /* tx DMA descriptor address */
422 #define RXIDLE BIT14
423 #define RXBREAK BIT14
424 #define IRQ_TXDATA BIT13
425 #define IRQ_TXIDLE BIT12
426 #define IRQ_TXUNDER BIT11 /* HDLC */
427 #define IRQ_RXDATA BIT10
428 #define IRQ_RXIDLE BIT9 /* HDLC */
429 #define IRQ_RXBREAK BIT9 /* async */
430 #define IRQ_RXOVER BIT8
431 #define IRQ_DSR BIT7
432 #define IRQ_CTS BIT6
433 #define IRQ_DCD BIT5
434 #define IRQ_RI BIT4
435 #define IRQ_ALL 0x3ff0
436 #define IRQ_MASTER BIT0
438 #define slgt_irq_on(info, mask) \
439 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
440 #define slgt_irq_off(info, mask) \
441 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
443 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr);
444 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
445 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
446 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
447 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
448 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
450 static void msc_set_vcr(struct slgt_info *info);
452 static int startup(struct slgt_info *info);
453 static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
454 static void shutdown(struct slgt_info *info);
455 static void program_hw(struct slgt_info *info);
456 static void change_params(struct slgt_info *info);
458 static int register_test(struct slgt_info *info);
459 static int irq_test(struct slgt_info *info);
460 static int loopback_test(struct slgt_info *info);
461 static int adapter_test(struct slgt_info *info);
463 static void reset_adapter(struct slgt_info *info);
464 static void reset_port(struct slgt_info *info);
465 static void async_mode(struct slgt_info *info);
466 static void sync_mode(struct slgt_info *info);
468 static void rx_stop(struct slgt_info *info);
469 static void rx_start(struct slgt_info *info);
470 static void reset_rbufs(struct slgt_info *info);
471 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
472 static void rdma_reset(struct slgt_info *info);
473 static int rx_get_frame(struct slgt_info *info);
474 static int rx_get_buf(struct slgt_info *info);
476 static void tx_start(struct slgt_info *info);
477 static void tx_stop(struct slgt_info *info);
478 static void tx_set_idle(struct slgt_info *info);
479 static unsigned int free_tbuf_count(struct slgt_info *info);
480 static void reset_tbufs(struct slgt_info *info);
481 static void tdma_reset(struct slgt_info *info);
482 static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
484 static void get_signals(struct slgt_info *info);
485 static void set_signals(struct slgt_info *info);
486 static void enable_loopback(struct slgt_info *info);
487 static void set_rate(struct slgt_info *info, u32 data_rate);
489 static int bh_action(struct slgt_info *info);
490 static void bh_handler(struct work_struct *work);
491 static void bh_transmit(struct slgt_info *info);
492 static void isr_serial(struct slgt_info *info);
493 static void isr_rdma(struct slgt_info *info);
494 static void isr_txeom(struct slgt_info *info, unsigned short status);
495 static void isr_tdma(struct slgt_info *info);
496 static irqreturn_t slgt_interrupt(int irq, void *dev_id);
498 static int alloc_dma_bufs(struct slgt_info *info);
499 static void free_dma_bufs(struct slgt_info *info);
500 static int alloc_desc(struct slgt_info *info);
501 static void free_desc(struct slgt_info *info);
502 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
503 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
505 static int alloc_tmp_rbuf(struct slgt_info *info);
506 static void free_tmp_rbuf(struct slgt_info *info);
508 static void tx_timeout(unsigned long context);
509 static void rx_timeout(unsigned long context);
512 * ioctl handlers
514 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
515 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
516 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
517 static int get_txidle(struct slgt_info *info, int __user *idle_mode);
518 static int set_txidle(struct slgt_info *info, int idle_mode);
519 static int tx_enable(struct slgt_info *info, int enable);
520 static int tx_abort(struct slgt_info *info);
521 static int rx_enable(struct slgt_info *info, int enable);
522 static int modem_input_wait(struct slgt_info *info,int arg);
523 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
524 static int tiocmget(struct tty_struct *tty, struct file *file);
525 static int tiocmset(struct tty_struct *tty, struct file *file,
526 unsigned int set, unsigned int clear);
527 static void set_break(struct tty_struct *tty, int break_state);
528 static int get_interface(struct slgt_info *info, int __user *if_mode);
529 static int set_interface(struct slgt_info *info, int if_mode);
530 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
531 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
532 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
535 * driver functions
537 static void add_device(struct slgt_info *info);
538 static void device_init(int adapter_num, struct pci_dev *pdev);
539 static int claim_resources(struct slgt_info *info);
540 static void release_resources(struct slgt_info *info);
543 * DEBUG OUTPUT CODE
545 #ifndef DBGINFO
546 #define DBGINFO(fmt)
547 #endif
548 #ifndef DBGERR
549 #define DBGERR(fmt)
550 #endif
551 #ifndef DBGBH
552 #define DBGBH(fmt)
553 #endif
554 #ifndef DBGISR
555 #define DBGISR(fmt)
556 #endif
558 #ifdef DBGDATA
559 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
561 int i;
562 int linecount;
563 printk("%s %s data:\n",info->device_name, label);
564 while(count) {
565 linecount = (count > 16) ? 16 : count;
566 for(i=0; i < linecount; i++)
567 printk("%02X ",(unsigned char)data[i]);
568 for(;i<17;i++)
569 printk(" ");
570 for(i=0;i<linecount;i++) {
571 if (data[i]>=040 && data[i]<=0176)
572 printk("%c",data[i]);
573 else
574 printk(".");
576 printk("\n");
577 data += linecount;
578 count -= linecount;
581 #else
582 #define DBGDATA(info, buf, size, label)
583 #endif
585 #ifdef DBGTBUF
586 static void dump_tbufs(struct slgt_info *info)
588 int i;
589 printk("tbuf_current=%d\n", info->tbuf_current);
590 for (i=0 ; i < info->tbuf_count ; i++) {
591 printk("%d: count=%04X status=%04X\n",
592 i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
595 #else
596 #define DBGTBUF(info)
597 #endif
599 #ifdef DBGRBUF
600 static void dump_rbufs(struct slgt_info *info)
602 int i;
603 printk("rbuf_current=%d\n", info->rbuf_current);
604 for (i=0 ; i < info->rbuf_count ; i++) {
605 printk("%d: count=%04X status=%04X\n",
606 i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
609 #else
610 #define DBGRBUF(info)
611 #endif
613 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
615 #ifdef SANITY_CHECK
616 if (!info) {
617 printk("null struct slgt_info for (%s) in %s\n", devname, name);
618 return 1;
620 if (info->magic != MGSL_MAGIC) {
621 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
622 return 1;
624 #else
625 if (!info)
626 return 1;
627 #endif
628 return 0;
632 * line discipline callback wrappers
634 * The wrappers maintain line discipline references
635 * while calling into the line discipline.
637 * ldisc_receive_buf - pass receive data to line discipline
639 static void ldisc_receive_buf(struct tty_struct *tty,
640 const __u8 *data, char *flags, int count)
642 struct tty_ldisc *ld;
643 if (!tty)
644 return;
645 ld = tty_ldisc_ref(tty);
646 if (ld) {
647 if (ld->receive_buf)
648 ld->receive_buf(tty, data, flags, count);
649 tty_ldisc_deref(ld);
653 /* tty callbacks */
655 static int open(struct tty_struct *tty, struct file *filp)
657 struct slgt_info *info;
658 int retval, line;
659 unsigned long flags;
661 line = tty->index;
662 if ((line < 0) || (line >= slgt_device_count)) {
663 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
664 return -ENODEV;
667 info = slgt_device_list;
668 while(info && info->line != line)
669 info = info->next_device;
670 if (sanity_check(info, tty->name, "open"))
671 return -ENODEV;
672 if (info->init_error) {
673 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
674 return -ENODEV;
677 tty->driver_data = info;
678 info->tty = tty;
680 DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->count));
682 /* If port is closing, signal caller to try again */
683 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
684 if (info->flags & ASYNC_CLOSING)
685 interruptible_sleep_on(&info->close_wait);
686 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
687 -EAGAIN : -ERESTARTSYS);
688 goto cleanup;
691 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
693 spin_lock_irqsave(&info->netlock, flags);
694 if (info->netcount) {
695 retval = -EBUSY;
696 spin_unlock_irqrestore(&info->netlock, flags);
697 goto cleanup;
699 info->count++;
700 spin_unlock_irqrestore(&info->netlock, flags);
702 if (info->count == 1) {
703 /* 1st open on this device, init hardware */
704 retval = startup(info);
705 if (retval < 0)
706 goto cleanup;
709 retval = block_til_ready(tty, filp, info);
710 if (retval) {
711 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
712 goto cleanup;
715 retval = 0;
717 cleanup:
718 if (retval) {
719 if (tty->count == 1)
720 info->tty = NULL; /* tty layer will release tty struct */
721 if(info->count)
722 info->count--;
725 DBGINFO(("%s open rc=%d\n", info->device_name, retval));
726 return retval;
729 static void close(struct tty_struct *tty, struct file *filp)
731 struct slgt_info *info = tty->driver_data;
733 if (sanity_check(info, tty->name, "close"))
734 return;
735 DBGINFO(("%s close entry, count=%d\n", info->device_name, info->count));
737 if (!info->count)
738 return;
740 if (tty_hung_up_p(filp))
741 goto cleanup;
743 if ((tty->count == 1) && (info->count != 1)) {
745 * tty->count is 1 and the tty structure will be freed.
746 * info->count should be one in this case.
747 * if it's not, correct it so that the port is shutdown.
749 DBGERR(("%s close: bad refcount; tty->count=1, "
750 "info->count=%d\n", info->device_name, info->count));
751 info->count = 1;
754 info->count--;
756 /* if at least one open remaining, leave hardware active */
757 if (info->count)
758 goto cleanup;
760 info->flags |= ASYNC_CLOSING;
762 /* set tty->closing to notify line discipline to
763 * only process XON/XOFF characters. Only the N_TTY
764 * discipline appears to use this (ppp does not).
766 tty->closing = 1;
768 /* wait for transmit data to clear all layers */
770 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
771 DBGINFO(("%s call tty_wait_until_sent\n", info->device_name));
772 tty_wait_until_sent(tty, info->closing_wait);
775 if (info->flags & ASYNC_INITIALIZED)
776 wait_until_sent(tty, info->timeout);
777 if (tty->driver->flush_buffer)
778 tty->driver->flush_buffer(tty);
779 tty_ldisc_flush(tty);
781 shutdown(info);
783 tty->closing = 0;
784 info->tty = NULL;
786 if (info->blocked_open) {
787 if (info->close_delay) {
788 msleep_interruptible(jiffies_to_msecs(info->close_delay));
790 wake_up_interruptible(&info->open_wait);
793 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
795 wake_up_interruptible(&info->close_wait);
797 cleanup:
798 DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->count));
801 static void hangup(struct tty_struct *tty)
803 struct slgt_info *info = tty->driver_data;
805 if (sanity_check(info, tty->name, "hangup"))
806 return;
807 DBGINFO(("%s hangup\n", info->device_name));
809 flush_buffer(tty);
810 shutdown(info);
812 info->count = 0;
813 info->flags &= ~ASYNC_NORMAL_ACTIVE;
814 info->tty = NULL;
816 wake_up_interruptible(&info->open_wait);
819 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
821 struct slgt_info *info = tty->driver_data;
822 unsigned long flags;
824 DBGINFO(("%s set_termios\n", tty->driver->name));
826 /* just return if nothing has changed */
827 if ((tty->termios->c_cflag == old_termios->c_cflag)
828 && (RELEVANT_IFLAG(tty->termios->c_iflag)
829 == RELEVANT_IFLAG(old_termios->c_iflag)))
830 return;
832 change_params(info);
834 /* Handle transition to B0 status */
835 if (old_termios->c_cflag & CBAUD &&
836 !(tty->termios->c_cflag & CBAUD)) {
837 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
838 spin_lock_irqsave(&info->lock,flags);
839 set_signals(info);
840 spin_unlock_irqrestore(&info->lock,flags);
843 /* Handle transition away from B0 status */
844 if (!(old_termios->c_cflag & CBAUD) &&
845 tty->termios->c_cflag & CBAUD) {
846 info->signals |= SerialSignal_DTR;
847 if (!(tty->termios->c_cflag & CRTSCTS) ||
848 !test_bit(TTY_THROTTLED, &tty->flags)) {
849 info->signals |= SerialSignal_RTS;
851 spin_lock_irqsave(&info->lock,flags);
852 set_signals(info);
853 spin_unlock_irqrestore(&info->lock,flags);
856 /* Handle turning off CRTSCTS */
857 if (old_termios->c_cflag & CRTSCTS &&
858 !(tty->termios->c_cflag & CRTSCTS)) {
859 tty->hw_stopped = 0;
860 tx_release(tty);
864 static int write(struct tty_struct *tty,
865 const unsigned char *buf, int count)
867 int ret = 0;
868 struct slgt_info *info = tty->driver_data;
869 unsigned long flags;
871 if (sanity_check(info, tty->name, "write"))
872 goto cleanup;
873 DBGINFO(("%s write count=%d\n", info->device_name, count));
875 if (!info->tx_buf)
876 goto cleanup;
878 if (count > info->max_frame_size) {
879 ret = -EIO;
880 goto cleanup;
883 if (!count)
884 goto cleanup;
886 if (info->params.mode == MGSL_MODE_RAW ||
887 info->params.mode == MGSL_MODE_MONOSYNC ||
888 info->params.mode == MGSL_MODE_BISYNC) {
889 unsigned int bufs_needed = (count/DMABUFSIZE);
890 unsigned int bufs_free = free_tbuf_count(info);
891 if (count % DMABUFSIZE)
892 ++bufs_needed;
893 if (bufs_needed > bufs_free)
894 goto cleanup;
895 } else {
896 if (info->tx_active)
897 goto cleanup;
898 if (info->tx_count) {
899 /* send accumulated data from send_char() calls */
900 /* as frame and wait before accepting more data. */
901 tx_load(info, info->tx_buf, info->tx_count);
902 goto start;
906 ret = info->tx_count = count;
907 tx_load(info, buf, count);
908 goto start;
910 start:
911 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
912 spin_lock_irqsave(&info->lock,flags);
913 if (!info->tx_active)
914 tx_start(info);
915 spin_unlock_irqrestore(&info->lock,flags);
918 cleanup:
919 DBGINFO(("%s write rc=%d\n", info->device_name, ret));
920 return ret;
923 static void put_char(struct tty_struct *tty, unsigned char ch)
925 struct slgt_info *info = tty->driver_data;
926 unsigned long flags;
928 if (sanity_check(info, tty->name, "put_char"))
929 return;
930 DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
931 if (!info->tx_buf)
932 return;
933 spin_lock_irqsave(&info->lock,flags);
934 if (!info->tx_active && (info->tx_count < info->max_frame_size))
935 info->tx_buf[info->tx_count++] = ch;
936 spin_unlock_irqrestore(&info->lock,flags);
939 static void send_xchar(struct tty_struct *tty, char ch)
941 struct slgt_info *info = tty->driver_data;
942 unsigned long flags;
944 if (sanity_check(info, tty->name, "send_xchar"))
945 return;
946 DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
947 info->x_char = ch;
948 if (ch) {
949 spin_lock_irqsave(&info->lock,flags);
950 if (!info->tx_enabled)
951 tx_start(info);
952 spin_unlock_irqrestore(&info->lock,flags);
956 static void wait_until_sent(struct tty_struct *tty, int timeout)
958 struct slgt_info *info = tty->driver_data;
959 unsigned long orig_jiffies, char_time;
961 if (!info )
962 return;
963 if (sanity_check(info, tty->name, "wait_until_sent"))
964 return;
965 DBGINFO(("%s wait_until_sent entry\n", info->device_name));
966 if (!(info->flags & ASYNC_INITIALIZED))
967 goto exit;
969 orig_jiffies = jiffies;
971 /* Set check interval to 1/5 of estimated time to
972 * send a character, and make it at least 1. The check
973 * interval should also be less than the timeout.
974 * Note: use tight timings here to satisfy the NIST-PCTS.
977 if (info->params.data_rate) {
978 char_time = info->timeout/(32 * 5);
979 if (!char_time)
980 char_time++;
981 } else
982 char_time = 1;
984 if (timeout)
985 char_time = min_t(unsigned long, char_time, timeout);
987 while (info->tx_active) {
988 msleep_interruptible(jiffies_to_msecs(char_time));
989 if (signal_pending(current))
990 break;
991 if (timeout && time_after(jiffies, orig_jiffies + timeout))
992 break;
995 exit:
996 DBGINFO(("%s wait_until_sent exit\n", info->device_name));
999 static int write_room(struct tty_struct *tty)
1001 struct slgt_info *info = tty->driver_data;
1002 int ret;
1004 if (sanity_check(info, tty->name, "write_room"))
1005 return 0;
1006 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1007 DBGINFO(("%s write_room=%d\n", info->device_name, ret));
1008 return ret;
1011 static void flush_chars(struct tty_struct *tty)
1013 struct slgt_info *info = tty->driver_data;
1014 unsigned long flags;
1016 if (sanity_check(info, tty->name, "flush_chars"))
1017 return;
1018 DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
1020 if (info->tx_count <= 0 || tty->stopped ||
1021 tty->hw_stopped || !info->tx_buf)
1022 return;
1024 DBGINFO(("%s flush_chars start transmit\n", info->device_name));
1026 spin_lock_irqsave(&info->lock,flags);
1027 if (!info->tx_active && info->tx_count) {
1028 tx_load(info, info->tx_buf,info->tx_count);
1029 tx_start(info);
1031 spin_unlock_irqrestore(&info->lock,flags);
1034 static void flush_buffer(struct tty_struct *tty)
1036 struct slgt_info *info = tty->driver_data;
1037 unsigned long flags;
1039 if (sanity_check(info, tty->name, "flush_buffer"))
1040 return;
1041 DBGINFO(("%s flush_buffer\n", info->device_name));
1043 spin_lock_irqsave(&info->lock,flags);
1044 if (!info->tx_active)
1045 info->tx_count = 0;
1046 spin_unlock_irqrestore(&info->lock,flags);
1048 tty_wakeup(tty);
1052 * throttle (stop) transmitter
1054 static void tx_hold(struct tty_struct *tty)
1056 struct slgt_info *info = tty->driver_data;
1057 unsigned long flags;
1059 if (sanity_check(info, tty->name, "tx_hold"))
1060 return;
1061 DBGINFO(("%s tx_hold\n", info->device_name));
1062 spin_lock_irqsave(&info->lock,flags);
1063 if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
1064 tx_stop(info);
1065 spin_unlock_irqrestore(&info->lock,flags);
1069 * release (start) transmitter
1071 static void tx_release(struct tty_struct *tty)
1073 struct slgt_info *info = tty->driver_data;
1074 unsigned long flags;
1076 if (sanity_check(info, tty->name, "tx_release"))
1077 return;
1078 DBGINFO(("%s tx_release\n", info->device_name));
1079 spin_lock_irqsave(&info->lock,flags);
1080 if (!info->tx_active && info->tx_count) {
1081 tx_load(info, info->tx_buf, info->tx_count);
1082 tx_start(info);
1084 spin_unlock_irqrestore(&info->lock,flags);
1088 * Service an IOCTL request
1090 * Arguments
1092 * tty pointer to tty instance data
1093 * file pointer to associated file object for device
1094 * cmd IOCTL command code
1095 * arg command argument/context
1097 * Return 0 if success, otherwise error code
1099 static int ioctl(struct tty_struct *tty, struct file *file,
1100 unsigned int cmd, unsigned long arg)
1102 struct slgt_info *info = tty->driver_data;
1103 struct mgsl_icount cnow; /* kernel counter temps */
1104 struct serial_icounter_struct __user *p_cuser; /* user space */
1105 unsigned long flags;
1106 void __user *argp = (void __user *)arg;
1108 if (sanity_check(info, tty->name, "ioctl"))
1109 return -ENODEV;
1110 DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1112 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1113 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1114 if (tty->flags & (1 << TTY_IO_ERROR))
1115 return -EIO;
1118 switch (cmd) {
1119 case MGSL_IOCGPARAMS:
1120 return get_params(info, argp);
1121 case MGSL_IOCSPARAMS:
1122 return set_params(info, argp);
1123 case MGSL_IOCGTXIDLE:
1124 return get_txidle(info, argp);
1125 case MGSL_IOCSTXIDLE:
1126 return set_txidle(info, (int)arg);
1127 case MGSL_IOCTXENABLE:
1128 return tx_enable(info, (int)arg);
1129 case MGSL_IOCRXENABLE:
1130 return rx_enable(info, (int)arg);
1131 case MGSL_IOCTXABORT:
1132 return tx_abort(info);
1133 case MGSL_IOCGSTATS:
1134 return get_stats(info, argp);
1135 case MGSL_IOCWAITEVENT:
1136 return wait_mgsl_event(info, argp);
1137 case TIOCMIWAIT:
1138 return modem_input_wait(info,(int)arg);
1139 case MGSL_IOCGIF:
1140 return get_interface(info, argp);
1141 case MGSL_IOCSIF:
1142 return set_interface(info,(int)arg);
1143 case MGSL_IOCSGPIO:
1144 return set_gpio(info, argp);
1145 case MGSL_IOCGGPIO:
1146 return get_gpio(info, argp);
1147 case MGSL_IOCWAITGPIO:
1148 return wait_gpio(info, argp);
1149 case TIOCGICOUNT:
1150 spin_lock_irqsave(&info->lock,flags);
1151 cnow = info->icount;
1152 spin_unlock_irqrestore(&info->lock,flags);
1153 p_cuser = argp;
1154 if (put_user(cnow.cts, &p_cuser->cts) ||
1155 put_user(cnow.dsr, &p_cuser->dsr) ||
1156 put_user(cnow.rng, &p_cuser->rng) ||
1157 put_user(cnow.dcd, &p_cuser->dcd) ||
1158 put_user(cnow.rx, &p_cuser->rx) ||
1159 put_user(cnow.tx, &p_cuser->tx) ||
1160 put_user(cnow.frame, &p_cuser->frame) ||
1161 put_user(cnow.overrun, &p_cuser->overrun) ||
1162 put_user(cnow.parity, &p_cuser->parity) ||
1163 put_user(cnow.brk, &p_cuser->brk) ||
1164 put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
1165 return -EFAULT;
1166 return 0;
1167 default:
1168 return -ENOIOCTLCMD;
1170 return 0;
1174 * support for 32 bit ioctl calls on 64 bit systems
1176 #ifdef CONFIG_COMPAT
1177 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
1179 struct MGSL_PARAMS32 tmp_params;
1181 DBGINFO(("%s get_params32\n", info->device_name));
1182 tmp_params.mode = (compat_ulong_t)info->params.mode;
1183 tmp_params.loopback = info->params.loopback;
1184 tmp_params.flags = info->params.flags;
1185 tmp_params.encoding = info->params.encoding;
1186 tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed;
1187 tmp_params.addr_filter = info->params.addr_filter;
1188 tmp_params.crc_type = info->params.crc_type;
1189 tmp_params.preamble_length = info->params.preamble_length;
1190 tmp_params.preamble = info->params.preamble;
1191 tmp_params.data_rate = (compat_ulong_t)info->params.data_rate;
1192 tmp_params.data_bits = info->params.data_bits;
1193 tmp_params.stop_bits = info->params.stop_bits;
1194 tmp_params.parity = info->params.parity;
1195 if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
1196 return -EFAULT;
1197 return 0;
1200 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
1202 struct MGSL_PARAMS32 tmp_params;
1204 DBGINFO(("%s set_params32\n", info->device_name));
1205 if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
1206 return -EFAULT;
1208 spin_lock(&info->lock);
1209 info->params.mode = tmp_params.mode;
1210 info->params.loopback = tmp_params.loopback;
1211 info->params.flags = tmp_params.flags;
1212 info->params.encoding = tmp_params.encoding;
1213 info->params.clock_speed = tmp_params.clock_speed;
1214 info->params.addr_filter = tmp_params.addr_filter;
1215 info->params.crc_type = tmp_params.crc_type;
1216 info->params.preamble_length = tmp_params.preamble_length;
1217 info->params.preamble = tmp_params.preamble;
1218 info->params.data_rate = tmp_params.data_rate;
1219 info->params.data_bits = tmp_params.data_bits;
1220 info->params.stop_bits = tmp_params.stop_bits;
1221 info->params.parity = tmp_params.parity;
1222 spin_unlock(&info->lock);
1224 change_params(info);
1226 return 0;
1229 static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
1230 unsigned int cmd, unsigned long arg)
1232 struct slgt_info *info = tty->driver_data;
1233 int rc = -ENOIOCTLCMD;
1235 if (sanity_check(info, tty->name, "compat_ioctl"))
1236 return -ENODEV;
1237 DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
1239 switch (cmd) {
1241 case MGSL_IOCSPARAMS32:
1242 rc = set_params32(info, compat_ptr(arg));
1243 break;
1245 case MGSL_IOCGPARAMS32:
1246 rc = get_params32(info, compat_ptr(arg));
1247 break;
1249 case MGSL_IOCGPARAMS:
1250 case MGSL_IOCSPARAMS:
1251 case MGSL_IOCGTXIDLE:
1252 case MGSL_IOCGSTATS:
1253 case MGSL_IOCWAITEVENT:
1254 case MGSL_IOCGIF:
1255 case MGSL_IOCSGPIO:
1256 case MGSL_IOCGGPIO:
1257 case MGSL_IOCWAITGPIO:
1258 case TIOCGICOUNT:
1259 rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
1260 break;
1262 case MGSL_IOCSTXIDLE:
1263 case MGSL_IOCTXENABLE:
1264 case MGSL_IOCRXENABLE:
1265 case MGSL_IOCTXABORT:
1266 case TIOCMIWAIT:
1267 case MGSL_IOCSIF:
1268 rc = ioctl(tty, file, cmd, arg);
1269 break;
1272 DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
1273 return rc;
1275 #else
1276 #define slgt_compat_ioctl NULL
1277 #endif /* ifdef CONFIG_COMPAT */
1280 * proc fs support
1282 static inline int line_info(char *buf, struct slgt_info *info)
1284 char stat_buf[30];
1285 int ret;
1286 unsigned long flags;
1288 ret = sprintf(buf, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1289 info->device_name, info->phys_reg_addr,
1290 info->irq_level, info->max_frame_size);
1292 /* output current serial signal states */
1293 spin_lock_irqsave(&info->lock,flags);
1294 get_signals(info);
1295 spin_unlock_irqrestore(&info->lock,flags);
1297 stat_buf[0] = 0;
1298 stat_buf[1] = 0;
1299 if (info->signals & SerialSignal_RTS)
1300 strcat(stat_buf, "|RTS");
1301 if (info->signals & SerialSignal_CTS)
1302 strcat(stat_buf, "|CTS");
1303 if (info->signals & SerialSignal_DTR)
1304 strcat(stat_buf, "|DTR");
1305 if (info->signals & SerialSignal_DSR)
1306 strcat(stat_buf, "|DSR");
1307 if (info->signals & SerialSignal_DCD)
1308 strcat(stat_buf, "|CD");
1309 if (info->signals & SerialSignal_RI)
1310 strcat(stat_buf, "|RI");
1312 if (info->params.mode != MGSL_MODE_ASYNC) {
1313 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1314 info->icount.txok, info->icount.rxok);
1315 if (info->icount.txunder)
1316 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1317 if (info->icount.txabort)
1318 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1319 if (info->icount.rxshort)
1320 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1321 if (info->icount.rxlong)
1322 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1323 if (info->icount.rxover)
1324 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1325 if (info->icount.rxcrc)
1326 ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
1327 } else {
1328 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1329 info->icount.tx, info->icount.rx);
1330 if (info->icount.frame)
1331 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1332 if (info->icount.parity)
1333 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1334 if (info->icount.brk)
1335 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1336 if (info->icount.overrun)
1337 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1340 /* Append serial signal status to end */
1341 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1343 ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1344 info->tx_active,info->bh_requested,info->bh_running,
1345 info->pending_bh);
1347 return ret;
1350 /* Called to print information about devices
1352 static int read_proc(char *page, char **start, off_t off, int count,
1353 int *eof, void *data)
1355 int len = 0, l;
1356 off_t begin = 0;
1357 struct slgt_info *info;
1359 len += sprintf(page, "synclink_gt driver:%s\n", driver_version);
1361 info = slgt_device_list;
1362 while( info ) {
1363 l = line_info(page + len, info);
1364 len += l;
1365 if (len+begin > off+count)
1366 goto done;
1367 if (len+begin < off) {
1368 begin += len;
1369 len = 0;
1371 info = info->next_device;
1374 *eof = 1;
1375 done:
1376 if (off >= len+begin)
1377 return 0;
1378 *start = page + (off-begin);
1379 return ((count < begin+len-off) ? count : begin+len-off);
1383 * return count of bytes in transmit buffer
1385 static int chars_in_buffer(struct tty_struct *tty)
1387 struct slgt_info *info = tty->driver_data;
1388 if (sanity_check(info, tty->name, "chars_in_buffer"))
1389 return 0;
1390 DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, info->tx_count));
1391 return info->tx_count;
1395 * signal remote device to throttle send data (our receive data)
1397 static void throttle(struct tty_struct * tty)
1399 struct slgt_info *info = tty->driver_data;
1400 unsigned long flags;
1402 if (sanity_check(info, tty->name, "throttle"))
1403 return;
1404 DBGINFO(("%s throttle\n", info->device_name));
1405 if (I_IXOFF(tty))
1406 send_xchar(tty, STOP_CHAR(tty));
1407 if (tty->termios->c_cflag & CRTSCTS) {
1408 spin_lock_irqsave(&info->lock,flags);
1409 info->signals &= ~SerialSignal_RTS;
1410 set_signals(info);
1411 spin_unlock_irqrestore(&info->lock,flags);
1416 * signal remote device to stop throttling send data (our receive data)
1418 static void unthrottle(struct tty_struct * tty)
1420 struct slgt_info *info = tty->driver_data;
1421 unsigned long flags;
1423 if (sanity_check(info, tty->name, "unthrottle"))
1424 return;
1425 DBGINFO(("%s unthrottle\n", info->device_name));
1426 if (I_IXOFF(tty)) {
1427 if (info->x_char)
1428 info->x_char = 0;
1429 else
1430 send_xchar(tty, START_CHAR(tty));
1432 if (tty->termios->c_cflag & CRTSCTS) {
1433 spin_lock_irqsave(&info->lock,flags);
1434 info->signals |= SerialSignal_RTS;
1435 set_signals(info);
1436 spin_unlock_irqrestore(&info->lock,flags);
1441 * set or clear transmit break condition
1442 * break_state -1=set break condition, 0=clear
1444 static void set_break(struct tty_struct *tty, int break_state)
1446 struct slgt_info *info = tty->driver_data;
1447 unsigned short value;
1448 unsigned long flags;
1450 if (sanity_check(info, tty->name, "set_break"))
1451 return;
1452 DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1454 spin_lock_irqsave(&info->lock,flags);
1455 value = rd_reg16(info, TCR);
1456 if (break_state == -1)
1457 value |= BIT6;
1458 else
1459 value &= ~BIT6;
1460 wr_reg16(info, TCR, value);
1461 spin_unlock_irqrestore(&info->lock,flags);
1464 #if SYNCLINK_GENERIC_HDLC
1467 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1468 * set encoding and frame check sequence (FCS) options
1470 * dev pointer to network device structure
1471 * encoding serial encoding setting
1472 * parity FCS setting
1474 * returns 0 if success, otherwise error code
1476 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1477 unsigned short parity)
1479 struct slgt_info *info = dev_to_port(dev);
1480 unsigned char new_encoding;
1481 unsigned short new_crctype;
1483 /* return error if TTY interface open */
1484 if (info->count)
1485 return -EBUSY;
1487 DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1489 switch (encoding)
1491 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1492 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1493 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1494 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1495 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1496 default: return -EINVAL;
1499 switch (parity)
1501 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1502 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1503 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1504 default: return -EINVAL;
1507 info->params.encoding = new_encoding;
1508 info->params.crc_type = new_crctype;
1510 /* if network interface up, reprogram hardware */
1511 if (info->netcount)
1512 program_hw(info);
1514 return 0;
1518 * called by generic HDLC layer to send frame
1520 * skb socket buffer containing HDLC frame
1521 * dev pointer to network device structure
1523 * returns 0 if success, otherwise error code
1525 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1527 struct slgt_info *info = dev_to_port(dev);
1528 struct net_device_stats *stats = hdlc_stats(dev);
1529 unsigned long flags;
1531 DBGINFO(("%s hdlc_xmit\n", dev->name));
1533 /* stop sending until this frame completes */
1534 netif_stop_queue(dev);
1536 /* copy data to device buffers */
1537 info->tx_count = skb->len;
1538 tx_load(info, skb->data, skb->len);
1540 /* update network statistics */
1541 stats->tx_packets++;
1542 stats->tx_bytes += skb->len;
1544 /* done with socket buffer, so free it */
1545 dev_kfree_skb(skb);
1547 /* save start time for transmit timeout detection */
1548 dev->trans_start = jiffies;
1550 /* start hardware transmitter if necessary */
1551 spin_lock_irqsave(&info->lock,flags);
1552 if (!info->tx_active)
1553 tx_start(info);
1554 spin_unlock_irqrestore(&info->lock,flags);
1556 return 0;
1560 * called by network layer when interface enabled
1561 * claim resources and initialize hardware
1563 * dev pointer to network device structure
1565 * returns 0 if success, otherwise error code
1567 static int hdlcdev_open(struct net_device *dev)
1569 struct slgt_info *info = dev_to_port(dev);
1570 int rc;
1571 unsigned long flags;
1573 DBGINFO(("%s hdlcdev_open\n", dev->name));
1575 /* generic HDLC layer open processing */
1576 if ((rc = hdlc_open(dev)))
1577 return rc;
1579 /* arbitrate between network and tty opens */
1580 spin_lock_irqsave(&info->netlock, flags);
1581 if (info->count != 0 || info->netcount != 0) {
1582 DBGINFO(("%s hdlc_open busy\n", dev->name));
1583 spin_unlock_irqrestore(&info->netlock, flags);
1584 return -EBUSY;
1586 info->netcount=1;
1587 spin_unlock_irqrestore(&info->netlock, flags);
1589 /* claim resources and init adapter */
1590 if ((rc = startup(info)) != 0) {
1591 spin_lock_irqsave(&info->netlock, flags);
1592 info->netcount=0;
1593 spin_unlock_irqrestore(&info->netlock, flags);
1594 return rc;
1597 /* assert DTR and RTS, apply hardware settings */
1598 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
1599 program_hw(info);
1601 /* enable network layer transmit */
1602 dev->trans_start = jiffies;
1603 netif_start_queue(dev);
1605 /* inform generic HDLC layer of current DCD status */
1606 spin_lock_irqsave(&info->lock, flags);
1607 get_signals(info);
1608 spin_unlock_irqrestore(&info->lock, flags);
1609 if (info->signals & SerialSignal_DCD)
1610 netif_carrier_on(dev);
1611 else
1612 netif_carrier_off(dev);
1613 return 0;
1617 * called by network layer when interface is disabled
1618 * shutdown hardware and release resources
1620 * dev pointer to network device structure
1622 * returns 0 if success, otherwise error code
1624 static int hdlcdev_close(struct net_device *dev)
1626 struct slgt_info *info = dev_to_port(dev);
1627 unsigned long flags;
1629 DBGINFO(("%s hdlcdev_close\n", dev->name));
1631 netif_stop_queue(dev);
1633 /* shutdown adapter and release resources */
1634 shutdown(info);
1636 hdlc_close(dev);
1638 spin_lock_irqsave(&info->netlock, flags);
1639 info->netcount=0;
1640 spin_unlock_irqrestore(&info->netlock, flags);
1642 return 0;
1646 * called by network layer to process IOCTL call to network device
1648 * dev pointer to network device structure
1649 * ifr pointer to network interface request structure
1650 * cmd IOCTL command code
1652 * returns 0 if success, otherwise error code
1654 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1656 const size_t size = sizeof(sync_serial_settings);
1657 sync_serial_settings new_line;
1658 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1659 struct slgt_info *info = dev_to_port(dev);
1660 unsigned int flags;
1662 DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1664 /* return error if TTY interface open */
1665 if (info->count)
1666 return -EBUSY;
1668 if (cmd != SIOCWANDEV)
1669 return hdlc_ioctl(dev, ifr, cmd);
1671 switch(ifr->ifr_settings.type) {
1672 case IF_GET_IFACE: /* return current sync_serial_settings */
1674 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1675 if (ifr->ifr_settings.size < size) {
1676 ifr->ifr_settings.size = size; /* data size wanted */
1677 return -ENOBUFS;
1680 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1681 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1682 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1683 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1685 switch (flags){
1686 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1687 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1688 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1689 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1690 default: new_line.clock_type = CLOCK_DEFAULT;
1693 new_line.clock_rate = info->params.clock_speed;
1694 new_line.loopback = info->params.loopback ? 1:0;
1696 if (copy_to_user(line, &new_line, size))
1697 return -EFAULT;
1698 return 0;
1700 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1702 if(!capable(CAP_NET_ADMIN))
1703 return -EPERM;
1704 if (copy_from_user(&new_line, line, size))
1705 return -EFAULT;
1707 switch (new_line.clock_type)
1709 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1710 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1711 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1712 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1713 case CLOCK_DEFAULT: flags = info->params.flags &
1714 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1715 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1716 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1717 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1718 default: return -EINVAL;
1721 if (new_line.loopback != 0 && new_line.loopback != 1)
1722 return -EINVAL;
1724 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1725 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1726 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1727 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1728 info->params.flags |= flags;
1730 info->params.loopback = new_line.loopback;
1732 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1733 info->params.clock_speed = new_line.clock_rate;
1734 else
1735 info->params.clock_speed = 0;
1737 /* if network interface up, reprogram hardware */
1738 if (info->netcount)
1739 program_hw(info);
1740 return 0;
1742 default:
1743 return hdlc_ioctl(dev, ifr, cmd);
1748 * called by network layer when transmit timeout is detected
1750 * dev pointer to network device structure
1752 static void hdlcdev_tx_timeout(struct net_device *dev)
1754 struct slgt_info *info = dev_to_port(dev);
1755 struct net_device_stats *stats = hdlc_stats(dev);
1756 unsigned long flags;
1758 DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1760 stats->tx_errors++;
1761 stats->tx_aborted_errors++;
1763 spin_lock_irqsave(&info->lock,flags);
1764 tx_stop(info);
1765 spin_unlock_irqrestore(&info->lock,flags);
1767 netif_wake_queue(dev);
1771 * called by device driver when transmit completes
1772 * reenable network layer transmit if stopped
1774 * info pointer to device instance information
1776 static void hdlcdev_tx_done(struct slgt_info *info)
1778 if (netif_queue_stopped(info->netdev))
1779 netif_wake_queue(info->netdev);
1783 * called by device driver when frame received
1784 * pass frame to network layer
1786 * info pointer to device instance information
1787 * buf pointer to buffer contianing frame data
1788 * size count of data bytes in buf
1790 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1792 struct sk_buff *skb = dev_alloc_skb(size);
1793 struct net_device *dev = info->netdev;
1794 struct net_device_stats *stats = hdlc_stats(dev);
1796 DBGINFO(("%s hdlcdev_rx\n", dev->name));
1798 if (skb == NULL) {
1799 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1800 stats->rx_dropped++;
1801 return;
1804 memcpy(skb_put(skb, size),buf,size);
1806 skb->protocol = hdlc_type_trans(skb, info->netdev);
1808 stats->rx_packets++;
1809 stats->rx_bytes += size;
1811 netif_rx(skb);
1813 info->netdev->last_rx = jiffies;
1817 * called by device driver when adding device instance
1818 * do generic HDLC initialization
1820 * info pointer to device instance information
1822 * returns 0 if success, otherwise error code
1824 static int hdlcdev_init(struct slgt_info *info)
1826 int rc;
1827 struct net_device *dev;
1828 hdlc_device *hdlc;
1830 /* allocate and initialize network and HDLC layer objects */
1832 if (!(dev = alloc_hdlcdev(info))) {
1833 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1834 return -ENOMEM;
1837 /* for network layer reporting purposes only */
1838 dev->mem_start = info->phys_reg_addr;
1839 dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1840 dev->irq = info->irq_level;
1842 /* network layer callbacks and settings */
1843 dev->do_ioctl = hdlcdev_ioctl;
1844 dev->open = hdlcdev_open;
1845 dev->stop = hdlcdev_close;
1846 dev->tx_timeout = hdlcdev_tx_timeout;
1847 dev->watchdog_timeo = 10*HZ;
1848 dev->tx_queue_len = 50;
1850 /* generic HDLC layer callbacks and settings */
1851 hdlc = dev_to_hdlc(dev);
1852 hdlc->attach = hdlcdev_attach;
1853 hdlc->xmit = hdlcdev_xmit;
1855 /* register objects with HDLC layer */
1856 if ((rc = register_hdlc_device(dev))) {
1857 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1858 free_netdev(dev);
1859 return rc;
1862 info->netdev = dev;
1863 return 0;
1867 * called by device driver when removing device instance
1868 * do generic HDLC cleanup
1870 * info pointer to device instance information
1872 static void hdlcdev_exit(struct slgt_info *info)
1874 unregister_hdlc_device(info->netdev);
1875 free_netdev(info->netdev);
1876 info->netdev = NULL;
1879 #endif /* ifdef CONFIG_HDLC */
1882 * get async data from rx DMA buffers
1884 static void rx_async(struct slgt_info *info)
1886 struct tty_struct *tty = info->tty;
1887 struct mgsl_icount *icount = &info->icount;
1888 unsigned int start, end;
1889 unsigned char *p;
1890 unsigned char status;
1891 struct slgt_desc *bufs = info->rbufs;
1892 int i, count;
1893 int chars = 0;
1894 int stat;
1895 unsigned char ch;
1897 start = end = info->rbuf_current;
1899 while(desc_complete(bufs[end])) {
1900 count = desc_count(bufs[end]) - info->rbuf_index;
1901 p = bufs[end].buf + info->rbuf_index;
1903 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1904 DBGDATA(info, p, count, "rx");
1906 for(i=0 ; i < count; i+=2, p+=2) {
1907 ch = *p;
1908 icount->rx++;
1910 stat = 0;
1912 if ((status = *(p+1) & (BIT1 + BIT0))) {
1913 if (status & BIT1)
1914 icount->parity++;
1915 else if (status & BIT0)
1916 icount->frame++;
1917 /* discard char if tty control flags say so */
1918 if (status & info->ignore_status_mask)
1919 continue;
1920 if (status & BIT1)
1921 stat = TTY_PARITY;
1922 else if (status & BIT0)
1923 stat = TTY_FRAME;
1925 if (tty) {
1926 tty_insert_flip_char(tty, ch, stat);
1927 chars++;
1931 if (i < count) {
1932 /* receive buffer not completed */
1933 info->rbuf_index += i;
1934 mod_timer(&info->rx_timer, jiffies + 1);
1935 break;
1938 info->rbuf_index = 0;
1939 free_rbufs(info, end, end);
1941 if (++end == info->rbuf_count)
1942 end = 0;
1944 /* if entire list searched then no frame available */
1945 if (end == start)
1946 break;
1949 if (tty && chars)
1950 tty_flip_buffer_push(tty);
1954 * return next bottom half action to perform
1956 static int bh_action(struct slgt_info *info)
1958 unsigned long flags;
1959 int rc;
1961 spin_lock_irqsave(&info->lock,flags);
1963 if (info->pending_bh & BH_RECEIVE) {
1964 info->pending_bh &= ~BH_RECEIVE;
1965 rc = BH_RECEIVE;
1966 } else if (info->pending_bh & BH_TRANSMIT) {
1967 info->pending_bh &= ~BH_TRANSMIT;
1968 rc = BH_TRANSMIT;
1969 } else if (info->pending_bh & BH_STATUS) {
1970 info->pending_bh &= ~BH_STATUS;
1971 rc = BH_STATUS;
1972 } else {
1973 /* Mark BH routine as complete */
1974 info->bh_running = 0;
1975 info->bh_requested = 0;
1976 rc = 0;
1979 spin_unlock_irqrestore(&info->lock,flags);
1981 return rc;
1985 * perform bottom half processing
1987 static void bh_handler(struct work_struct *work)
1989 struct slgt_info *info = container_of(work, struct slgt_info, task);
1990 int action;
1992 if (!info)
1993 return;
1994 info->bh_running = 1;
1996 while((action = bh_action(info))) {
1997 switch (action) {
1998 case BH_RECEIVE:
1999 DBGBH(("%s bh receive\n", info->device_name));
2000 switch(info->params.mode) {
2001 case MGSL_MODE_ASYNC:
2002 rx_async(info);
2003 break;
2004 case MGSL_MODE_HDLC:
2005 while(rx_get_frame(info));
2006 break;
2007 case MGSL_MODE_RAW:
2008 case MGSL_MODE_MONOSYNC:
2009 case MGSL_MODE_BISYNC:
2010 while(rx_get_buf(info));
2011 break;
2013 /* restart receiver if rx DMA buffers exhausted */
2014 if (info->rx_restart)
2015 rx_start(info);
2016 break;
2017 case BH_TRANSMIT:
2018 bh_transmit(info);
2019 break;
2020 case BH_STATUS:
2021 DBGBH(("%s bh status\n", info->device_name));
2022 info->ri_chkcount = 0;
2023 info->dsr_chkcount = 0;
2024 info->dcd_chkcount = 0;
2025 info->cts_chkcount = 0;
2026 break;
2027 default:
2028 DBGBH(("%s unknown action\n", info->device_name));
2029 break;
2032 DBGBH(("%s bh_handler exit\n", info->device_name));
2035 static void bh_transmit(struct slgt_info *info)
2037 struct tty_struct *tty = info->tty;
2039 DBGBH(("%s bh_transmit\n", info->device_name));
2040 if (tty)
2041 tty_wakeup(tty);
2044 static void dsr_change(struct slgt_info *info)
2046 get_signals(info);
2047 DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
2048 if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2049 slgt_irq_off(info, IRQ_DSR);
2050 return;
2052 info->icount.dsr++;
2053 if (info->signals & SerialSignal_DSR)
2054 info->input_signal_events.dsr_up++;
2055 else
2056 info->input_signal_events.dsr_down++;
2057 wake_up_interruptible(&info->status_event_wait_q);
2058 wake_up_interruptible(&info->event_wait_q);
2059 info->pending_bh |= BH_STATUS;
2062 static void cts_change(struct slgt_info *info)
2064 get_signals(info);
2065 DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
2066 if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2067 slgt_irq_off(info, IRQ_CTS);
2068 return;
2070 info->icount.cts++;
2071 if (info->signals & SerialSignal_CTS)
2072 info->input_signal_events.cts_up++;
2073 else
2074 info->input_signal_events.cts_down++;
2075 wake_up_interruptible(&info->status_event_wait_q);
2076 wake_up_interruptible(&info->event_wait_q);
2077 info->pending_bh |= BH_STATUS;
2079 if (info->flags & ASYNC_CTS_FLOW) {
2080 if (info->tty) {
2081 if (info->tty->hw_stopped) {
2082 if (info->signals & SerialSignal_CTS) {
2083 info->tty->hw_stopped = 0;
2084 info->pending_bh |= BH_TRANSMIT;
2085 return;
2087 } else {
2088 if (!(info->signals & SerialSignal_CTS))
2089 info->tty->hw_stopped = 1;
2095 static void dcd_change(struct slgt_info *info)
2097 get_signals(info);
2098 DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
2099 if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2100 slgt_irq_off(info, IRQ_DCD);
2101 return;
2103 info->icount.dcd++;
2104 if (info->signals & SerialSignal_DCD) {
2105 info->input_signal_events.dcd_up++;
2106 } else {
2107 info->input_signal_events.dcd_down++;
2109 #if SYNCLINK_GENERIC_HDLC
2110 if (info->netcount) {
2111 if (info->signals & SerialSignal_DCD)
2112 netif_carrier_on(info->netdev);
2113 else
2114 netif_carrier_off(info->netdev);
2116 #endif
2117 wake_up_interruptible(&info->status_event_wait_q);
2118 wake_up_interruptible(&info->event_wait_q);
2119 info->pending_bh |= BH_STATUS;
2121 if (info->flags & ASYNC_CHECK_CD) {
2122 if (info->signals & SerialSignal_DCD)
2123 wake_up_interruptible(&info->open_wait);
2124 else {
2125 if (info->tty)
2126 tty_hangup(info->tty);
2131 static void ri_change(struct slgt_info *info)
2133 get_signals(info);
2134 DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2135 if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2136 slgt_irq_off(info, IRQ_RI);
2137 return;
2139 info->icount.dcd++;
2140 if (info->signals & SerialSignal_RI) {
2141 info->input_signal_events.ri_up++;
2142 } else {
2143 info->input_signal_events.ri_down++;
2145 wake_up_interruptible(&info->status_event_wait_q);
2146 wake_up_interruptible(&info->event_wait_q);
2147 info->pending_bh |= BH_STATUS;
2150 static void isr_serial(struct slgt_info *info)
2152 unsigned short status = rd_reg16(info, SSR);
2154 DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2156 wr_reg16(info, SSR, status); /* clear pending */
2158 info->irq_occurred = 1;
2160 if (info->params.mode == MGSL_MODE_ASYNC) {
2161 if (status & IRQ_TXIDLE) {
2162 if (info->tx_count)
2163 isr_txeom(info, status);
2165 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2166 info->icount.brk++;
2167 /* process break detection if tty control allows */
2168 if (info->tty) {
2169 if (!(status & info->ignore_status_mask)) {
2170 if (info->read_status_mask & MASK_BREAK) {
2171 tty_insert_flip_char(info->tty, 0, TTY_BREAK);
2172 if (info->flags & ASYNC_SAK)
2173 do_SAK(info->tty);
2178 } else {
2179 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2180 isr_txeom(info, status);
2182 if (status & IRQ_RXIDLE) {
2183 if (status & RXIDLE)
2184 info->icount.rxidle++;
2185 else
2186 info->icount.exithunt++;
2187 wake_up_interruptible(&info->event_wait_q);
2190 if (status & IRQ_RXOVER)
2191 rx_start(info);
2194 if (status & IRQ_DSR)
2195 dsr_change(info);
2196 if (status & IRQ_CTS)
2197 cts_change(info);
2198 if (status & IRQ_DCD)
2199 dcd_change(info);
2200 if (status & IRQ_RI)
2201 ri_change(info);
2204 static void isr_rdma(struct slgt_info *info)
2206 unsigned int status = rd_reg32(info, RDCSR);
2208 DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2210 /* RDCSR (rx DMA control/status)
2212 * 31..07 reserved
2213 * 06 save status byte to DMA buffer
2214 * 05 error
2215 * 04 eol (end of list)
2216 * 03 eob (end of buffer)
2217 * 02 IRQ enable
2218 * 01 reset
2219 * 00 enable
2221 wr_reg32(info, RDCSR, status); /* clear pending */
2223 if (status & (BIT5 + BIT4)) {
2224 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2225 info->rx_restart = 1;
2227 info->pending_bh |= BH_RECEIVE;
2230 static void isr_tdma(struct slgt_info *info)
2232 unsigned int status = rd_reg32(info, TDCSR);
2234 DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2236 /* TDCSR (tx DMA control/status)
2238 * 31..06 reserved
2239 * 05 error
2240 * 04 eol (end of list)
2241 * 03 eob (end of buffer)
2242 * 02 IRQ enable
2243 * 01 reset
2244 * 00 enable
2246 wr_reg32(info, TDCSR, status); /* clear pending */
2248 if (status & (BIT5 + BIT4 + BIT3)) {
2249 // another transmit buffer has completed
2250 // run bottom half to get more send data from user
2251 info->pending_bh |= BH_TRANSMIT;
2255 static void isr_txeom(struct slgt_info *info, unsigned short status)
2257 DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2259 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2260 tdma_reset(info);
2261 reset_tbufs(info);
2262 if (status & IRQ_TXUNDER) {
2263 unsigned short val = rd_reg16(info, TCR);
2264 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2265 wr_reg16(info, TCR, val); /* clear reset bit */
2268 if (info->tx_active) {
2269 if (info->params.mode != MGSL_MODE_ASYNC) {
2270 if (status & IRQ_TXUNDER)
2271 info->icount.txunder++;
2272 else if (status & IRQ_TXIDLE)
2273 info->icount.txok++;
2276 info->tx_active = 0;
2277 info->tx_count = 0;
2279 del_timer(&info->tx_timer);
2281 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2282 info->signals &= ~SerialSignal_RTS;
2283 info->drop_rts_on_tx_done = 0;
2284 set_signals(info);
2287 #if SYNCLINK_GENERIC_HDLC
2288 if (info->netcount)
2289 hdlcdev_tx_done(info);
2290 else
2291 #endif
2293 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2294 tx_stop(info);
2295 return;
2297 info->pending_bh |= BH_TRANSMIT;
2302 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2304 struct cond_wait *w, *prev;
2306 /* wake processes waiting for specific transitions */
2307 for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2308 if (w->data & changed) {
2309 w->data = state;
2310 wake_up_interruptible(&w->q);
2311 if (prev != NULL)
2312 prev->next = w->next;
2313 else
2314 info->gpio_wait_q = w->next;
2315 } else
2316 prev = w;
2320 /* interrupt service routine
2322 * irq interrupt number
2323 * dev_id device ID supplied during interrupt registration
2325 static irqreturn_t slgt_interrupt(int irq, void *dev_id)
2327 struct slgt_info *info;
2328 unsigned int gsr;
2329 unsigned int i;
2331 DBGISR(("slgt_interrupt irq=%d entry\n", irq));
2333 info = dev_id;
2334 if (!info)
2335 return IRQ_NONE;
2337 spin_lock(&info->lock);
2339 while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2340 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2341 info->irq_occurred = 1;
2342 for(i=0; i < info->port_count ; i++) {
2343 if (info->port_array[i] == NULL)
2344 continue;
2345 if (gsr & (BIT8 << i))
2346 isr_serial(info->port_array[i]);
2347 if (gsr & (BIT16 << (i*2)))
2348 isr_rdma(info->port_array[i]);
2349 if (gsr & (BIT17 << (i*2)))
2350 isr_tdma(info->port_array[i]);
2354 if (info->gpio_present) {
2355 unsigned int state;
2356 unsigned int changed;
2357 while ((changed = rd_reg32(info, IOSR)) != 0) {
2358 DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2359 /* read latched state of GPIO signals */
2360 state = rd_reg32(info, IOVR);
2361 /* clear pending GPIO interrupt bits */
2362 wr_reg32(info, IOSR, changed);
2363 for (i=0 ; i < info->port_count ; i++) {
2364 if (info->port_array[i] != NULL)
2365 isr_gpio(info->port_array[i], changed, state);
2370 for(i=0; i < info->port_count ; i++) {
2371 struct slgt_info *port = info->port_array[i];
2373 if (port && (port->count || port->netcount) &&
2374 port->pending_bh && !port->bh_running &&
2375 !port->bh_requested) {
2376 DBGISR(("%s bh queued\n", port->device_name));
2377 schedule_work(&port->task);
2378 port->bh_requested = 1;
2382 spin_unlock(&info->lock);
2384 DBGISR(("slgt_interrupt irq=%d exit\n", irq));
2385 return IRQ_HANDLED;
2388 static int startup(struct slgt_info *info)
2390 DBGINFO(("%s startup\n", info->device_name));
2392 if (info->flags & ASYNC_INITIALIZED)
2393 return 0;
2395 if (!info->tx_buf) {
2396 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2397 if (!info->tx_buf) {
2398 DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2399 return -ENOMEM;
2403 info->pending_bh = 0;
2405 memset(&info->icount, 0, sizeof(info->icount));
2407 /* program hardware for current parameters */
2408 change_params(info);
2410 if (info->tty)
2411 clear_bit(TTY_IO_ERROR, &info->tty->flags);
2413 info->flags |= ASYNC_INITIALIZED;
2415 return 0;
2419 * called by close() and hangup() to shutdown hardware
2421 static void shutdown(struct slgt_info *info)
2423 unsigned long flags;
2425 if (!(info->flags & ASYNC_INITIALIZED))
2426 return;
2428 DBGINFO(("%s shutdown\n", info->device_name));
2430 /* clear status wait queue because status changes */
2431 /* can't happen after shutting down the hardware */
2432 wake_up_interruptible(&info->status_event_wait_q);
2433 wake_up_interruptible(&info->event_wait_q);
2435 del_timer_sync(&info->tx_timer);
2436 del_timer_sync(&info->rx_timer);
2438 kfree(info->tx_buf);
2439 info->tx_buf = NULL;
2441 spin_lock_irqsave(&info->lock,flags);
2443 tx_stop(info);
2444 rx_stop(info);
2446 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2448 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
2449 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2450 set_signals(info);
2453 flush_cond_wait(&info->gpio_wait_q);
2455 spin_unlock_irqrestore(&info->lock,flags);
2457 if (info->tty)
2458 set_bit(TTY_IO_ERROR, &info->tty->flags);
2460 info->flags &= ~ASYNC_INITIALIZED;
2463 static void program_hw(struct slgt_info *info)
2465 unsigned long flags;
2467 spin_lock_irqsave(&info->lock,flags);
2469 rx_stop(info);
2470 tx_stop(info);
2472 if (info->params.mode != MGSL_MODE_ASYNC ||
2473 info->netcount)
2474 sync_mode(info);
2475 else
2476 async_mode(info);
2478 set_signals(info);
2480 info->dcd_chkcount = 0;
2481 info->cts_chkcount = 0;
2482 info->ri_chkcount = 0;
2483 info->dsr_chkcount = 0;
2485 slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR);
2486 get_signals(info);
2488 if (info->netcount ||
2489 (info->tty && info->tty->termios->c_cflag & CREAD))
2490 rx_start(info);
2492 spin_unlock_irqrestore(&info->lock,flags);
2496 * reconfigure adapter based on new parameters
2498 static void change_params(struct slgt_info *info)
2500 unsigned cflag;
2501 int bits_per_char;
2503 if (!info->tty || !info->tty->termios)
2504 return;
2505 DBGINFO(("%s change_params\n", info->device_name));
2507 cflag = info->tty->termios->c_cflag;
2509 /* if B0 rate (hangup) specified then negate DTR and RTS */
2510 /* otherwise assert DTR and RTS */
2511 if (cflag & CBAUD)
2512 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
2513 else
2514 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2516 /* byte size and parity */
2518 switch (cflag & CSIZE) {
2519 case CS5: info->params.data_bits = 5; break;
2520 case CS6: info->params.data_bits = 6; break;
2521 case CS7: info->params.data_bits = 7; break;
2522 case CS8: info->params.data_bits = 8; break;
2523 default: info->params.data_bits = 7; break;
2526 info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2528 if (cflag & PARENB)
2529 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2530 else
2531 info->params.parity = ASYNC_PARITY_NONE;
2533 /* calculate number of jiffies to transmit a full
2534 * FIFO (32 bytes) at specified data rate
2536 bits_per_char = info->params.data_bits +
2537 info->params.stop_bits + 1;
2539 info->params.data_rate = tty_get_baud_rate(info->tty);
2541 if (info->params.data_rate) {
2542 info->timeout = (32*HZ*bits_per_char) /
2543 info->params.data_rate;
2545 info->timeout += HZ/50; /* Add .02 seconds of slop */
2547 if (cflag & CRTSCTS)
2548 info->flags |= ASYNC_CTS_FLOW;
2549 else
2550 info->flags &= ~ASYNC_CTS_FLOW;
2552 if (cflag & CLOCAL)
2553 info->flags &= ~ASYNC_CHECK_CD;
2554 else
2555 info->flags |= ASYNC_CHECK_CD;
2557 /* process tty input control flags */
2559 info->read_status_mask = IRQ_RXOVER;
2560 if (I_INPCK(info->tty))
2561 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2562 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
2563 info->read_status_mask |= MASK_BREAK;
2564 if (I_IGNPAR(info->tty))
2565 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2566 if (I_IGNBRK(info->tty)) {
2567 info->ignore_status_mask |= MASK_BREAK;
2568 /* If ignoring parity and break indicators, ignore
2569 * overruns too. (For real raw support).
2571 if (I_IGNPAR(info->tty))
2572 info->ignore_status_mask |= MASK_OVERRUN;
2575 program_hw(info);
2578 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2580 DBGINFO(("%s get_stats\n", info->device_name));
2581 if (!user_icount) {
2582 memset(&info->icount, 0, sizeof(info->icount));
2583 } else {
2584 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2585 return -EFAULT;
2587 return 0;
2590 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2592 DBGINFO(("%s get_params\n", info->device_name));
2593 if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2594 return -EFAULT;
2595 return 0;
2598 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2600 unsigned long flags;
2601 MGSL_PARAMS tmp_params;
2603 DBGINFO(("%s set_params\n", info->device_name));
2604 if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2605 return -EFAULT;
2607 spin_lock_irqsave(&info->lock, flags);
2608 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2609 spin_unlock_irqrestore(&info->lock, flags);
2611 change_params(info);
2613 return 0;
2616 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2618 DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2619 if (put_user(info->idle_mode, idle_mode))
2620 return -EFAULT;
2621 return 0;
2624 static int set_txidle(struct slgt_info *info, int idle_mode)
2626 unsigned long flags;
2627 DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2628 spin_lock_irqsave(&info->lock,flags);
2629 info->idle_mode = idle_mode;
2630 if (info->params.mode != MGSL_MODE_ASYNC)
2631 tx_set_idle(info);
2632 spin_unlock_irqrestore(&info->lock,flags);
2633 return 0;
2636 static int tx_enable(struct slgt_info *info, int enable)
2638 unsigned long flags;
2639 DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2640 spin_lock_irqsave(&info->lock,flags);
2641 if (enable) {
2642 if (!info->tx_enabled)
2643 tx_start(info);
2644 } else {
2645 if (info->tx_enabled)
2646 tx_stop(info);
2648 spin_unlock_irqrestore(&info->lock,flags);
2649 return 0;
2653 * abort transmit HDLC frame
2655 static int tx_abort(struct slgt_info *info)
2657 unsigned long flags;
2658 DBGINFO(("%s tx_abort\n", info->device_name));
2659 spin_lock_irqsave(&info->lock,flags);
2660 tdma_reset(info);
2661 spin_unlock_irqrestore(&info->lock,flags);
2662 return 0;
2665 static int rx_enable(struct slgt_info *info, int enable)
2667 unsigned long flags;
2668 DBGINFO(("%s rx_enable(%d)\n", info->device_name, enable));
2669 spin_lock_irqsave(&info->lock,flags);
2670 if (enable) {
2671 if (!info->rx_enabled)
2672 rx_start(info);
2673 else if (enable == 2) {
2674 /* force hunt mode (write 1 to RCR[3]) */
2675 wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
2677 } else {
2678 if (info->rx_enabled)
2679 rx_stop(info);
2681 spin_unlock_irqrestore(&info->lock,flags);
2682 return 0;
2686 * wait for specified event to occur
2688 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2690 unsigned long flags;
2691 int s;
2692 int rc=0;
2693 struct mgsl_icount cprev, cnow;
2694 int events;
2695 int mask;
2696 struct _input_signal_events oldsigs, newsigs;
2697 DECLARE_WAITQUEUE(wait, current);
2699 if (get_user(mask, mask_ptr))
2700 return -EFAULT;
2702 DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2704 spin_lock_irqsave(&info->lock,flags);
2706 /* return immediately if state matches requested events */
2707 get_signals(info);
2708 s = info->signals;
2710 events = mask &
2711 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2712 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2713 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2714 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2715 if (events) {
2716 spin_unlock_irqrestore(&info->lock,flags);
2717 goto exit;
2720 /* save current irq counts */
2721 cprev = info->icount;
2722 oldsigs = info->input_signal_events;
2724 /* enable hunt and idle irqs if needed */
2725 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2726 unsigned short val = rd_reg16(info, SCR);
2727 if (!(val & IRQ_RXIDLE))
2728 wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2731 set_current_state(TASK_INTERRUPTIBLE);
2732 add_wait_queue(&info->event_wait_q, &wait);
2734 spin_unlock_irqrestore(&info->lock,flags);
2736 for(;;) {
2737 schedule();
2738 if (signal_pending(current)) {
2739 rc = -ERESTARTSYS;
2740 break;
2743 /* get current irq counts */
2744 spin_lock_irqsave(&info->lock,flags);
2745 cnow = info->icount;
2746 newsigs = info->input_signal_events;
2747 set_current_state(TASK_INTERRUPTIBLE);
2748 spin_unlock_irqrestore(&info->lock,flags);
2750 /* if no change, wait aborted for some reason */
2751 if (newsigs.dsr_up == oldsigs.dsr_up &&
2752 newsigs.dsr_down == oldsigs.dsr_down &&
2753 newsigs.dcd_up == oldsigs.dcd_up &&
2754 newsigs.dcd_down == oldsigs.dcd_down &&
2755 newsigs.cts_up == oldsigs.cts_up &&
2756 newsigs.cts_down == oldsigs.cts_down &&
2757 newsigs.ri_up == oldsigs.ri_up &&
2758 newsigs.ri_down == oldsigs.ri_down &&
2759 cnow.exithunt == cprev.exithunt &&
2760 cnow.rxidle == cprev.rxidle) {
2761 rc = -EIO;
2762 break;
2765 events = mask &
2766 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2767 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2768 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2769 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2770 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2771 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2772 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2773 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2774 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2775 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2776 if (events)
2777 break;
2779 cprev = cnow;
2780 oldsigs = newsigs;
2783 remove_wait_queue(&info->event_wait_q, &wait);
2784 set_current_state(TASK_RUNNING);
2787 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2788 spin_lock_irqsave(&info->lock,flags);
2789 if (!waitqueue_active(&info->event_wait_q)) {
2790 /* disable enable exit hunt mode/idle rcvd IRQs */
2791 wr_reg16(info, SCR,
2792 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2794 spin_unlock_irqrestore(&info->lock,flags);
2796 exit:
2797 if (rc == 0)
2798 rc = put_user(events, mask_ptr);
2799 return rc;
2802 static int get_interface(struct slgt_info *info, int __user *if_mode)
2804 DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2805 if (put_user(info->if_mode, if_mode))
2806 return -EFAULT;
2807 return 0;
2810 static int set_interface(struct slgt_info *info, int if_mode)
2812 unsigned long flags;
2813 unsigned short val;
2815 DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2816 spin_lock_irqsave(&info->lock,flags);
2817 info->if_mode = if_mode;
2819 msc_set_vcr(info);
2821 /* TCR (tx control) 07 1=RTS driver control */
2822 val = rd_reg16(info, TCR);
2823 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2824 val |= BIT7;
2825 else
2826 val &= ~BIT7;
2827 wr_reg16(info, TCR, val);
2829 spin_unlock_irqrestore(&info->lock,flags);
2830 return 0;
2834 * set general purpose IO pin state and direction
2836 * user_gpio fields:
2837 * state each bit indicates a pin state
2838 * smask set bit indicates pin state to set
2839 * dir each bit indicates a pin direction (0=input, 1=output)
2840 * dmask set bit indicates pin direction to set
2842 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2844 unsigned long flags;
2845 struct gpio_desc gpio;
2846 __u32 data;
2848 if (!info->gpio_present)
2849 return -EINVAL;
2850 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2851 return -EFAULT;
2852 DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2853 info->device_name, gpio.state, gpio.smask,
2854 gpio.dir, gpio.dmask));
2856 spin_lock_irqsave(&info->lock,flags);
2857 if (gpio.dmask) {
2858 data = rd_reg32(info, IODR);
2859 data |= gpio.dmask & gpio.dir;
2860 data &= ~(gpio.dmask & ~gpio.dir);
2861 wr_reg32(info, IODR, data);
2863 if (gpio.smask) {
2864 data = rd_reg32(info, IOVR);
2865 data |= gpio.smask & gpio.state;
2866 data &= ~(gpio.smask & ~gpio.state);
2867 wr_reg32(info, IOVR, data);
2869 spin_unlock_irqrestore(&info->lock,flags);
2871 return 0;
2875 * get general purpose IO pin state and direction
2877 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2879 struct gpio_desc gpio;
2880 if (!info->gpio_present)
2881 return -EINVAL;
2882 gpio.state = rd_reg32(info, IOVR);
2883 gpio.smask = 0xffffffff;
2884 gpio.dir = rd_reg32(info, IODR);
2885 gpio.dmask = 0xffffffff;
2886 if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2887 return -EFAULT;
2888 DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
2889 info->device_name, gpio.state, gpio.dir));
2890 return 0;
2894 * conditional wait facility
2896 static void init_cond_wait(struct cond_wait *w, unsigned int data)
2898 init_waitqueue_head(&w->q);
2899 init_waitqueue_entry(&w->wait, current);
2900 w->data = data;
2903 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
2905 set_current_state(TASK_INTERRUPTIBLE);
2906 add_wait_queue(&w->q, &w->wait);
2907 w->next = *head;
2908 *head = w;
2911 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
2913 struct cond_wait *w, *prev;
2914 remove_wait_queue(&cw->q, &cw->wait);
2915 set_current_state(TASK_RUNNING);
2916 for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
2917 if (w == cw) {
2918 if (prev != NULL)
2919 prev->next = w->next;
2920 else
2921 *head = w->next;
2922 break;
2927 static void flush_cond_wait(struct cond_wait **head)
2929 while (*head != NULL) {
2930 wake_up_interruptible(&(*head)->q);
2931 *head = (*head)->next;
2936 * wait for general purpose I/O pin(s) to enter specified state
2938 * user_gpio fields:
2939 * state - bit indicates target pin state
2940 * smask - set bit indicates watched pin
2942 * The wait ends when at least one watched pin enters the specified
2943 * state. When 0 (no error) is returned, user_gpio->state is set to the
2944 * state of all GPIO pins when the wait ends.
2946 * Note: Each pin may be a dedicated input, dedicated output, or
2947 * configurable input/output. The number and configuration of pins
2948 * varies with the specific adapter model. Only input pins (dedicated
2949 * or configured) can be monitored with this function.
2951 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2953 unsigned long flags;
2954 int rc = 0;
2955 struct gpio_desc gpio;
2956 struct cond_wait wait;
2957 u32 state;
2959 if (!info->gpio_present)
2960 return -EINVAL;
2961 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2962 return -EFAULT;
2963 DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
2964 info->device_name, gpio.state, gpio.smask));
2965 /* ignore output pins identified by set IODR bit */
2966 if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
2967 return -EINVAL;
2968 init_cond_wait(&wait, gpio.smask);
2970 spin_lock_irqsave(&info->lock, flags);
2971 /* enable interrupts for watched pins */
2972 wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
2973 /* get current pin states */
2974 state = rd_reg32(info, IOVR);
2976 if (gpio.smask & ~(state ^ gpio.state)) {
2977 /* already in target state */
2978 gpio.state = state;
2979 } else {
2980 /* wait for target state */
2981 add_cond_wait(&info->gpio_wait_q, &wait);
2982 spin_unlock_irqrestore(&info->lock, flags);
2983 schedule();
2984 if (signal_pending(current))
2985 rc = -ERESTARTSYS;
2986 else
2987 gpio.state = wait.data;
2988 spin_lock_irqsave(&info->lock, flags);
2989 remove_cond_wait(&info->gpio_wait_q, &wait);
2992 /* disable all GPIO interrupts if no waiting processes */
2993 if (info->gpio_wait_q == NULL)
2994 wr_reg32(info, IOER, 0);
2995 spin_unlock_irqrestore(&info->lock,flags);
2997 if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
2998 rc = -EFAULT;
2999 return rc;
3002 static int modem_input_wait(struct slgt_info *info,int arg)
3004 unsigned long flags;
3005 int rc;
3006 struct mgsl_icount cprev, cnow;
3007 DECLARE_WAITQUEUE(wait, current);
3009 /* save current irq counts */
3010 spin_lock_irqsave(&info->lock,flags);
3011 cprev = info->icount;
3012 add_wait_queue(&info->status_event_wait_q, &wait);
3013 set_current_state(TASK_INTERRUPTIBLE);
3014 spin_unlock_irqrestore(&info->lock,flags);
3016 for(;;) {
3017 schedule();
3018 if (signal_pending(current)) {
3019 rc = -ERESTARTSYS;
3020 break;
3023 /* get new irq counts */
3024 spin_lock_irqsave(&info->lock,flags);
3025 cnow = info->icount;
3026 set_current_state(TASK_INTERRUPTIBLE);
3027 spin_unlock_irqrestore(&info->lock,flags);
3029 /* if no change, wait aborted for some reason */
3030 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3031 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3032 rc = -EIO;
3033 break;
3036 /* check for change in caller specified modem input */
3037 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3038 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3039 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3040 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3041 rc = 0;
3042 break;
3045 cprev = cnow;
3047 remove_wait_queue(&info->status_event_wait_q, &wait);
3048 set_current_state(TASK_RUNNING);
3049 return rc;
3053 * return state of serial control and status signals
3055 static int tiocmget(struct tty_struct *tty, struct file *file)
3057 struct slgt_info *info = tty->driver_data;
3058 unsigned int result;
3059 unsigned long flags;
3061 spin_lock_irqsave(&info->lock,flags);
3062 get_signals(info);
3063 spin_unlock_irqrestore(&info->lock,flags);
3065 result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3066 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3067 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3068 ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3069 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3070 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3072 DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
3073 return result;
3077 * set modem control signals (DTR/RTS)
3079 * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
3080 * TIOCMSET = set/clear signal values
3081 * value bit mask for command
3083 static int tiocmset(struct tty_struct *tty, struct file *file,
3084 unsigned int set, unsigned int clear)
3086 struct slgt_info *info = tty->driver_data;
3087 unsigned long flags;
3089 DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
3091 if (set & TIOCM_RTS)
3092 info->signals |= SerialSignal_RTS;
3093 if (set & TIOCM_DTR)
3094 info->signals |= SerialSignal_DTR;
3095 if (clear & TIOCM_RTS)
3096 info->signals &= ~SerialSignal_RTS;
3097 if (clear & TIOCM_DTR)
3098 info->signals &= ~SerialSignal_DTR;
3100 spin_lock_irqsave(&info->lock,flags);
3101 set_signals(info);
3102 spin_unlock_irqrestore(&info->lock,flags);
3103 return 0;
3107 * block current process until the device is ready to open
3109 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3110 struct slgt_info *info)
3112 DECLARE_WAITQUEUE(wait, current);
3113 int retval;
3114 int do_clocal = 0, extra_count = 0;
3115 unsigned long flags;
3117 DBGINFO(("%s block_til_ready\n", tty->driver->name));
3119 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3120 /* nonblock mode is set or port is not enabled */
3121 info->flags |= ASYNC_NORMAL_ACTIVE;
3122 return 0;
3125 if (tty->termios->c_cflag & CLOCAL)
3126 do_clocal = 1;
3128 /* Wait for carrier detect and the line to become
3129 * free (i.e., not in use by the callout). While we are in
3130 * this loop, info->count is dropped by one, so that
3131 * close() knows when to free things. We restore it upon
3132 * exit, either normal or abnormal.
3135 retval = 0;
3136 add_wait_queue(&info->open_wait, &wait);
3138 spin_lock_irqsave(&info->lock, flags);
3139 if (!tty_hung_up_p(filp)) {
3140 extra_count = 1;
3141 info->count--;
3143 spin_unlock_irqrestore(&info->lock, flags);
3144 info->blocked_open++;
3146 while (1) {
3147 if ((tty->termios->c_cflag & CBAUD)) {
3148 spin_lock_irqsave(&info->lock,flags);
3149 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
3150 set_signals(info);
3151 spin_unlock_irqrestore(&info->lock,flags);
3154 set_current_state(TASK_INTERRUPTIBLE);
3156 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
3157 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
3158 -EAGAIN : -ERESTARTSYS;
3159 break;
3162 spin_lock_irqsave(&info->lock,flags);
3163 get_signals(info);
3164 spin_unlock_irqrestore(&info->lock,flags);
3166 if (!(info->flags & ASYNC_CLOSING) &&
3167 (do_clocal || (info->signals & SerialSignal_DCD)) ) {
3168 break;
3171 if (signal_pending(current)) {
3172 retval = -ERESTARTSYS;
3173 break;
3176 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3177 schedule();
3180 set_current_state(TASK_RUNNING);
3181 remove_wait_queue(&info->open_wait, &wait);
3183 if (extra_count)
3184 info->count++;
3185 info->blocked_open--;
3187 if (!retval)
3188 info->flags |= ASYNC_NORMAL_ACTIVE;
3190 DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3191 return retval;
3194 static int alloc_tmp_rbuf(struct slgt_info *info)
3196 info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3197 if (info->tmp_rbuf == NULL)
3198 return -ENOMEM;
3199 return 0;
3202 static void free_tmp_rbuf(struct slgt_info *info)
3204 kfree(info->tmp_rbuf);
3205 info->tmp_rbuf = NULL;
3209 * allocate DMA descriptor lists.
3211 static int alloc_desc(struct slgt_info *info)
3213 unsigned int i;
3214 unsigned int pbufs;
3216 /* allocate memory to hold descriptor lists */
3217 info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
3218 if (info->bufs == NULL)
3219 return -ENOMEM;
3221 memset(info->bufs, 0, DESC_LIST_SIZE);
3223 info->rbufs = (struct slgt_desc*)info->bufs;
3224 info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3226 pbufs = (unsigned int)info->bufs_dma_addr;
3229 * Build circular lists of descriptors
3232 for (i=0; i < info->rbuf_count; i++) {
3233 /* physical address of this descriptor */
3234 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3236 /* physical address of next descriptor */
3237 if (i == info->rbuf_count - 1)
3238 info->rbufs[i].next = cpu_to_le32(pbufs);
3239 else
3240 info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3241 set_desc_count(info->rbufs[i], DMABUFSIZE);
3244 for (i=0; i < info->tbuf_count; i++) {
3245 /* physical address of this descriptor */
3246 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3248 /* physical address of next descriptor */
3249 if (i == info->tbuf_count - 1)
3250 info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3251 else
3252 info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3255 return 0;
3258 static void free_desc(struct slgt_info *info)
3260 if (info->bufs != NULL) {
3261 pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
3262 info->bufs = NULL;
3263 info->rbufs = NULL;
3264 info->tbufs = NULL;
3268 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3270 int i;
3271 for (i=0; i < count; i++) {
3272 if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
3273 return -ENOMEM;
3274 bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3276 return 0;
3279 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3281 int i;
3282 for (i=0; i < count; i++) {
3283 if (bufs[i].buf == NULL)
3284 continue;
3285 pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
3286 bufs[i].buf = NULL;
3290 static int alloc_dma_bufs(struct slgt_info *info)
3292 info->rbuf_count = 32;
3293 info->tbuf_count = 32;
3295 if (alloc_desc(info) < 0 ||
3296 alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3297 alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3298 alloc_tmp_rbuf(info) < 0) {
3299 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3300 return -ENOMEM;
3302 reset_rbufs(info);
3303 return 0;
3306 static void free_dma_bufs(struct slgt_info *info)
3308 if (info->bufs) {
3309 free_bufs(info, info->rbufs, info->rbuf_count);
3310 free_bufs(info, info->tbufs, info->tbuf_count);
3311 free_desc(info);
3313 free_tmp_rbuf(info);
3316 static int claim_resources(struct slgt_info *info)
3318 if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3319 DBGERR(("%s reg addr conflict, addr=%08X\n",
3320 info->device_name, info->phys_reg_addr));
3321 info->init_error = DiagStatus_AddressConflict;
3322 goto errout;
3324 else
3325 info->reg_addr_requested = 1;
3327 info->reg_addr = ioremap(info->phys_reg_addr, SLGT_REG_SIZE);
3328 if (!info->reg_addr) {
3329 DBGERR(("%s cant map device registers, addr=%08X\n",
3330 info->device_name, info->phys_reg_addr));
3331 info->init_error = DiagStatus_CantAssignPciResources;
3332 goto errout;
3334 return 0;
3336 errout:
3337 release_resources(info);
3338 return -ENODEV;
3341 static void release_resources(struct slgt_info *info)
3343 if (info->irq_requested) {
3344 free_irq(info->irq_level, info);
3345 info->irq_requested = 0;
3348 if (info->reg_addr_requested) {
3349 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3350 info->reg_addr_requested = 0;
3353 if (info->reg_addr) {
3354 iounmap(info->reg_addr);
3355 info->reg_addr = NULL;
3359 /* Add the specified device instance data structure to the
3360 * global linked list of devices and increment the device count.
3362 static void add_device(struct slgt_info *info)
3364 char *devstr;
3366 info->next_device = NULL;
3367 info->line = slgt_device_count;
3368 sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3370 if (info->line < MAX_DEVICES) {
3371 if (maxframe[info->line])
3372 info->max_frame_size = maxframe[info->line];
3373 info->dosyncppp = dosyncppp[info->line];
3376 slgt_device_count++;
3378 if (!slgt_device_list)
3379 slgt_device_list = info;
3380 else {
3381 struct slgt_info *current_dev = slgt_device_list;
3382 while(current_dev->next_device)
3383 current_dev = current_dev->next_device;
3384 current_dev->next_device = info;
3387 if (info->max_frame_size < 4096)
3388 info->max_frame_size = 4096;
3389 else if (info->max_frame_size > 65535)
3390 info->max_frame_size = 65535;
3392 switch(info->pdev->device) {
3393 case SYNCLINK_GT_DEVICE_ID:
3394 devstr = "GT";
3395 break;
3396 case SYNCLINK_GT2_DEVICE_ID:
3397 devstr = "GT2";
3398 break;
3399 case SYNCLINK_GT4_DEVICE_ID:
3400 devstr = "GT4";
3401 break;
3402 case SYNCLINK_AC_DEVICE_ID:
3403 devstr = "AC";
3404 info->params.mode = MGSL_MODE_ASYNC;
3405 break;
3406 default:
3407 devstr = "(unknown model)";
3409 printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3410 devstr, info->device_name, info->phys_reg_addr,
3411 info->irq_level, info->max_frame_size);
3413 #if SYNCLINK_GENERIC_HDLC
3414 hdlcdev_init(info);
3415 #endif
3419 * allocate device instance structure, return NULL on failure
3421 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3423 struct slgt_info *info;
3425 info = kmalloc(sizeof(struct slgt_info), GFP_KERNEL);
3427 if (!info) {
3428 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3429 driver_name, adapter_num, port_num));
3430 } else {
3431 memset(info, 0, sizeof(struct slgt_info));
3432 info->magic = MGSL_MAGIC;
3433 INIT_WORK(&info->task, bh_handler);
3434 info->max_frame_size = 4096;
3435 info->raw_rx_size = DMABUFSIZE;
3436 info->close_delay = 5*HZ/10;
3437 info->closing_wait = 30*HZ;
3438 init_waitqueue_head(&info->open_wait);
3439 init_waitqueue_head(&info->close_wait);
3440 init_waitqueue_head(&info->status_event_wait_q);
3441 init_waitqueue_head(&info->event_wait_q);
3442 spin_lock_init(&info->netlock);
3443 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3444 info->idle_mode = HDLC_TXIDLE_FLAGS;
3445 info->adapter_num = adapter_num;
3446 info->port_num = port_num;
3448 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3449 setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
3451 /* Copy configuration info to device instance data */
3452 info->pdev = pdev;
3453 info->irq_level = pdev->irq;
3454 info->phys_reg_addr = pci_resource_start(pdev,0);
3456 info->bus_type = MGSL_BUS_TYPE_PCI;
3457 info->irq_flags = IRQF_SHARED;
3459 info->init_error = -1; /* assume error, set to 0 on successful init */
3462 return info;
3465 static void device_init(int adapter_num, struct pci_dev *pdev)
3467 struct slgt_info *port_array[SLGT_MAX_PORTS];
3468 int i;
3469 int port_count = 1;
3471 if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3472 port_count = 2;
3473 else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3474 port_count = 4;
3476 /* allocate device instances for all ports */
3477 for (i=0; i < port_count; ++i) {
3478 port_array[i] = alloc_dev(adapter_num, i, pdev);
3479 if (port_array[i] == NULL) {
3480 for (--i; i >= 0; --i)
3481 kfree(port_array[i]);
3482 return;
3486 /* give copy of port_array to all ports and add to device list */
3487 for (i=0; i < port_count; ++i) {
3488 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3489 add_device(port_array[i]);
3490 port_array[i]->port_count = port_count;
3491 spin_lock_init(&port_array[i]->lock);
3494 /* Allocate and claim adapter resources */
3495 if (!claim_resources(port_array[0])) {
3497 alloc_dma_bufs(port_array[0]);
3499 /* copy resource information from first port to others */
3500 for (i = 1; i < port_count; ++i) {
3501 port_array[i]->lock = port_array[0]->lock;
3502 port_array[i]->irq_level = port_array[0]->irq_level;
3503 port_array[i]->reg_addr = port_array[0]->reg_addr;
3504 alloc_dma_bufs(port_array[i]);
3507 if (request_irq(port_array[0]->irq_level,
3508 slgt_interrupt,
3509 port_array[0]->irq_flags,
3510 port_array[0]->device_name,
3511 port_array[0]) < 0) {
3512 DBGERR(("%s request_irq failed IRQ=%d\n",
3513 port_array[0]->device_name,
3514 port_array[0]->irq_level));
3515 } else {
3516 port_array[0]->irq_requested = 1;
3517 adapter_test(port_array[0]);
3518 for (i=1 ; i < port_count ; i++) {
3519 port_array[i]->init_error = port_array[0]->init_error;
3520 port_array[i]->gpio_present = port_array[0]->gpio_present;
3525 for (i=0; i < port_count; ++i)
3526 tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
3529 static int __devinit init_one(struct pci_dev *dev,
3530 const struct pci_device_id *ent)
3532 if (pci_enable_device(dev)) {
3533 printk("error enabling pci device %p\n", dev);
3534 return -EIO;
3536 pci_set_master(dev);
3537 device_init(slgt_device_count, dev);
3538 return 0;
3541 static void __devexit remove_one(struct pci_dev *dev)
3545 static const struct tty_operations ops = {
3546 .open = open,
3547 .close = close,
3548 .write = write,
3549 .put_char = put_char,
3550 .flush_chars = flush_chars,
3551 .write_room = write_room,
3552 .chars_in_buffer = chars_in_buffer,
3553 .flush_buffer = flush_buffer,
3554 .ioctl = ioctl,
3555 .compat_ioctl = slgt_compat_ioctl,
3556 .throttle = throttle,
3557 .unthrottle = unthrottle,
3558 .send_xchar = send_xchar,
3559 .break_ctl = set_break,
3560 .wait_until_sent = wait_until_sent,
3561 .read_proc = read_proc,
3562 .set_termios = set_termios,
3563 .stop = tx_hold,
3564 .start = tx_release,
3565 .hangup = hangup,
3566 .tiocmget = tiocmget,
3567 .tiocmset = tiocmset,
3570 static void slgt_cleanup(void)
3572 int rc;
3573 struct slgt_info *info;
3574 struct slgt_info *tmp;
3576 printk("unload %s %s\n", driver_name, driver_version);
3578 if (serial_driver) {
3579 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
3580 tty_unregister_device(serial_driver, info->line);
3581 if ((rc = tty_unregister_driver(serial_driver)))
3582 DBGERR(("tty_unregister_driver error=%d\n", rc));
3583 put_tty_driver(serial_driver);
3586 /* reset devices */
3587 info = slgt_device_list;
3588 while(info) {
3589 reset_port(info);
3590 info = info->next_device;
3593 /* release devices */
3594 info = slgt_device_list;
3595 while(info) {
3596 #if SYNCLINK_GENERIC_HDLC
3597 hdlcdev_exit(info);
3598 #endif
3599 free_dma_bufs(info);
3600 free_tmp_rbuf(info);
3601 if (info->port_num == 0)
3602 release_resources(info);
3603 tmp = info;
3604 info = info->next_device;
3605 kfree(tmp);
3608 if (pci_registered)
3609 pci_unregister_driver(&pci_driver);
3613 * Driver initialization entry point.
3615 static int __init slgt_init(void)
3617 int rc;
3619 printk("%s %s\n", driver_name, driver_version);
3621 serial_driver = alloc_tty_driver(MAX_DEVICES);
3622 if (!serial_driver) {
3623 printk("%s can't allocate tty driver\n", driver_name);
3624 return -ENOMEM;
3627 /* Initialize the tty_driver structure */
3629 serial_driver->owner = THIS_MODULE;
3630 serial_driver->driver_name = tty_driver_name;
3631 serial_driver->name = tty_dev_prefix;
3632 serial_driver->major = ttymajor;
3633 serial_driver->minor_start = 64;
3634 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3635 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3636 serial_driver->init_termios = tty_std_termios;
3637 serial_driver->init_termios.c_cflag =
3638 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3639 serial_driver->init_termios.c_ispeed = 9600;
3640 serial_driver->init_termios.c_ospeed = 9600;
3641 serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3642 tty_set_operations(serial_driver, &ops);
3643 if ((rc = tty_register_driver(serial_driver)) < 0) {
3644 DBGERR(("%s can't register serial driver\n", driver_name));
3645 put_tty_driver(serial_driver);
3646 serial_driver = NULL;
3647 goto error;
3650 printk("%s %s, tty major#%d\n",
3651 driver_name, driver_version,
3652 serial_driver->major);
3654 slgt_device_count = 0;
3655 if ((rc = pci_register_driver(&pci_driver)) < 0) {
3656 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3657 goto error;
3659 pci_registered = 1;
3661 if (!slgt_device_list)
3662 printk("%s no devices found\n",driver_name);
3664 return 0;
3666 error:
3667 slgt_cleanup();
3668 return rc;
3671 static void __exit slgt_exit(void)
3673 slgt_cleanup();
3676 module_init(slgt_init);
3677 module_exit(slgt_exit);
3680 * register access routines
3683 #define CALC_REGADDR() \
3684 unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3685 if (addr >= 0x80) \
3686 reg_addr += (info->port_num) * 32;
3688 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3690 CALC_REGADDR();
3691 return readb((void __iomem *)reg_addr);
3694 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3696 CALC_REGADDR();
3697 writeb(value, (void __iomem *)reg_addr);
3700 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3702 CALC_REGADDR();
3703 return readw((void __iomem *)reg_addr);
3706 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3708 CALC_REGADDR();
3709 writew(value, (void __iomem *)reg_addr);
3712 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3714 CALC_REGADDR();
3715 return readl((void __iomem *)reg_addr);
3718 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3720 CALC_REGADDR();
3721 writel(value, (void __iomem *)reg_addr);
3724 static void rdma_reset(struct slgt_info *info)
3726 unsigned int i;
3728 /* set reset bit */
3729 wr_reg32(info, RDCSR, BIT1);
3731 /* wait for enable bit cleared */
3732 for(i=0 ; i < 1000 ; i++)
3733 if (!(rd_reg32(info, RDCSR) & BIT0))
3734 break;
3737 static void tdma_reset(struct slgt_info *info)
3739 unsigned int i;
3741 /* set reset bit */
3742 wr_reg32(info, TDCSR, BIT1);
3744 /* wait for enable bit cleared */
3745 for(i=0 ; i < 1000 ; i++)
3746 if (!(rd_reg32(info, TDCSR) & BIT0))
3747 break;
3751 * enable internal loopback
3752 * TxCLK and RxCLK are generated from BRG
3753 * and TxD is looped back to RxD internally.
3755 static void enable_loopback(struct slgt_info *info)
3757 /* SCR (serial control) BIT2=looopback enable */
3758 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3760 if (info->params.mode != MGSL_MODE_ASYNC) {
3761 /* CCR (clock control)
3762 * 07..05 tx clock source (010 = BRG)
3763 * 04..02 rx clock source (010 = BRG)
3764 * 01 auxclk enable (0 = disable)
3765 * 00 BRG enable (1 = enable)
3767 * 0100 1001
3769 wr_reg8(info, CCR, 0x49);
3771 /* set speed if available, otherwise use default */
3772 if (info->params.clock_speed)
3773 set_rate(info, info->params.clock_speed);
3774 else
3775 set_rate(info, 3686400);
3780 * set baud rate generator to specified rate
3782 static void set_rate(struct slgt_info *info, u32 rate)
3784 unsigned int div;
3785 static unsigned int osc = 14745600;
3787 /* div = osc/rate - 1
3789 * Round div up if osc/rate is not integer to
3790 * force to next slowest rate.
3793 if (rate) {
3794 div = osc/rate;
3795 if (!(osc % rate) && div)
3796 div--;
3797 wr_reg16(info, BDR, (unsigned short)div);
3801 static void rx_stop(struct slgt_info *info)
3803 unsigned short val;
3805 /* disable and reset receiver */
3806 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3807 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3808 wr_reg16(info, RCR, val); /* clear reset bit */
3810 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3812 /* clear pending rx interrupts */
3813 wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3815 rdma_reset(info);
3817 info->rx_enabled = 0;
3818 info->rx_restart = 0;
3821 static void rx_start(struct slgt_info *info)
3823 unsigned short val;
3825 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3827 /* clear pending rx overrun IRQ */
3828 wr_reg16(info, SSR, IRQ_RXOVER);
3830 /* reset and disable receiver */
3831 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3832 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3833 wr_reg16(info, RCR, val); /* clear reset bit */
3835 rdma_reset(info);
3836 reset_rbufs(info);
3838 /* set 1st descriptor address */
3839 wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
3841 if (info->params.mode != MGSL_MODE_ASYNC) {
3842 /* enable rx DMA and DMA interrupt */
3843 wr_reg32(info, RDCSR, (BIT2 + BIT0));
3844 } else {
3845 /* enable saving of rx status, rx DMA and DMA interrupt */
3846 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
3849 slgt_irq_on(info, IRQ_RXOVER);
3851 /* enable receiver */
3852 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
3854 info->rx_restart = 0;
3855 info->rx_enabled = 1;
3858 static void tx_start(struct slgt_info *info)
3860 if (!info->tx_enabled) {
3861 wr_reg16(info, TCR,
3862 (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
3863 info->tx_enabled = TRUE;
3866 if (info->tx_count) {
3867 info->drop_rts_on_tx_done = 0;
3869 if (info->params.mode != MGSL_MODE_ASYNC) {
3870 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3871 get_signals(info);
3872 if (!(info->signals & SerialSignal_RTS)) {
3873 info->signals |= SerialSignal_RTS;
3874 set_signals(info);
3875 info->drop_rts_on_tx_done = 1;
3879 slgt_irq_off(info, IRQ_TXDATA);
3880 slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
3881 /* clear tx idle and underrun status bits */
3882 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3884 if (!(rd_reg32(info, TDCSR) & BIT0)) {
3885 /* tx DMA stopped, restart tx DMA */
3886 tdma_reset(info);
3887 /* set 1st descriptor address */
3888 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
3889 switch(info->params.mode) {
3890 case MGSL_MODE_RAW:
3891 case MGSL_MODE_MONOSYNC:
3892 case MGSL_MODE_BISYNC:
3893 wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
3894 break;
3895 default:
3896 wr_reg32(info, TDCSR, BIT0); /* DMA enable */
3900 if (info->params.mode == MGSL_MODE_HDLC)
3901 mod_timer(&info->tx_timer, jiffies +
3902 msecs_to_jiffies(5000));
3903 } else {
3904 tdma_reset(info);
3905 /* set 1st descriptor address */
3906 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
3908 slgt_irq_off(info, IRQ_TXDATA);
3909 slgt_irq_on(info, IRQ_TXIDLE);
3910 /* clear tx idle status bit */
3911 wr_reg16(info, SSR, IRQ_TXIDLE);
3913 /* enable tx DMA */
3914 wr_reg32(info, TDCSR, BIT0);
3917 info->tx_active = 1;
3921 static void tx_stop(struct slgt_info *info)
3923 unsigned short val;
3925 del_timer(&info->tx_timer);
3927 tdma_reset(info);
3929 /* reset and disable transmitter */
3930 val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
3931 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
3933 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
3935 /* clear tx idle and underrun status bit */
3936 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
3938 reset_tbufs(info);
3940 info->tx_enabled = 0;
3941 info->tx_active = 0;
3944 static void reset_port(struct slgt_info *info)
3946 if (!info->reg_addr)
3947 return;
3949 tx_stop(info);
3950 rx_stop(info);
3952 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
3953 set_signals(info);
3955 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3958 static void reset_adapter(struct slgt_info *info)
3960 int i;
3961 for (i=0; i < info->port_count; ++i) {
3962 if (info->port_array[i])
3963 reset_port(info->port_array[i]);
3967 static void async_mode(struct slgt_info *info)
3969 unsigned short val;
3971 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
3972 tx_stop(info);
3973 rx_stop(info);
3975 /* TCR (tx control)
3977 * 15..13 mode, 010=async
3978 * 12..10 encoding, 000=NRZ
3979 * 09 parity enable
3980 * 08 1=odd parity, 0=even parity
3981 * 07 1=RTS driver control
3982 * 06 1=break enable
3983 * 05..04 character length
3984 * 00=5 bits
3985 * 01=6 bits
3986 * 10=7 bits
3987 * 11=8 bits
3988 * 03 0=1 stop bit, 1=2 stop bits
3989 * 02 reset
3990 * 01 enable
3991 * 00 auto-CTS enable
3993 val = 0x4000;
3995 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
3996 val |= BIT7;
3998 if (info->params.parity != ASYNC_PARITY_NONE) {
3999 val |= BIT9;
4000 if (info->params.parity == ASYNC_PARITY_ODD)
4001 val |= BIT8;
4004 switch (info->params.data_bits)
4006 case 6: val |= BIT4; break;
4007 case 7: val |= BIT5; break;
4008 case 8: val |= BIT5 + BIT4; break;
4011 if (info->params.stop_bits != 1)
4012 val |= BIT3;
4014 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4015 val |= BIT0;
4017 wr_reg16(info, TCR, val);
4019 /* RCR (rx control)
4021 * 15..13 mode, 010=async
4022 * 12..10 encoding, 000=NRZ
4023 * 09 parity enable
4024 * 08 1=odd parity, 0=even parity
4025 * 07..06 reserved, must be 0
4026 * 05..04 character length
4027 * 00=5 bits
4028 * 01=6 bits
4029 * 10=7 bits
4030 * 11=8 bits
4031 * 03 reserved, must be zero
4032 * 02 reset
4033 * 01 enable
4034 * 00 auto-DCD enable
4036 val = 0x4000;
4038 if (info->params.parity != ASYNC_PARITY_NONE) {
4039 val |= BIT9;
4040 if (info->params.parity == ASYNC_PARITY_ODD)
4041 val |= BIT8;
4044 switch (info->params.data_bits)
4046 case 6: val |= BIT4; break;
4047 case 7: val |= BIT5; break;
4048 case 8: val |= BIT5 + BIT4; break;
4051 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4052 val |= BIT0;
4054 wr_reg16(info, RCR, val);
4056 /* CCR (clock control)
4058 * 07..05 011 = tx clock source is BRG/16
4059 * 04..02 010 = rx clock source is BRG
4060 * 01 0 = auxclk disabled
4061 * 00 1 = BRG enabled
4063 * 0110 1001
4065 wr_reg8(info, CCR, 0x69);
4067 msc_set_vcr(info);
4069 /* SCR (serial control)
4071 * 15 1=tx req on FIFO half empty
4072 * 14 1=rx req on FIFO half full
4073 * 13 tx data IRQ enable
4074 * 12 tx idle IRQ enable
4075 * 11 rx break on IRQ enable
4076 * 10 rx data IRQ enable
4077 * 09 rx break off IRQ enable
4078 * 08 overrun IRQ enable
4079 * 07 DSR IRQ enable
4080 * 06 CTS IRQ enable
4081 * 05 DCD IRQ enable
4082 * 04 RI IRQ enable
4083 * 03 reserved, must be zero
4084 * 02 1=txd->rxd internal loopback enable
4085 * 01 reserved, must be zero
4086 * 00 1=master IRQ enable
4088 val = BIT15 + BIT14 + BIT0;
4089 wr_reg16(info, SCR, val);
4091 slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
4093 set_rate(info, info->params.data_rate * 16);
4095 if (info->params.loopback)
4096 enable_loopback(info);
4099 static void sync_mode(struct slgt_info *info)
4101 unsigned short val;
4103 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4104 tx_stop(info);
4105 rx_stop(info);
4107 /* TCR (tx control)
4109 * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4110 * 12..10 encoding
4111 * 09 CRC enable
4112 * 08 CRC32
4113 * 07 1=RTS driver control
4114 * 06 preamble enable
4115 * 05..04 preamble length
4116 * 03 share open/close flag
4117 * 02 reset
4118 * 01 enable
4119 * 00 auto-CTS enable
4121 val = 0;
4123 switch(info->params.mode) {
4124 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4125 case MGSL_MODE_BISYNC: val |= BIT15; break;
4126 case MGSL_MODE_RAW: val |= BIT13; break;
4128 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4129 val |= BIT7;
4131 switch(info->params.encoding)
4133 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4134 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4135 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4136 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4137 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4138 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4139 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4142 switch (info->params.crc_type & HDLC_CRC_MASK)
4144 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4145 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4148 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4149 val |= BIT6;
4151 switch (info->params.preamble_length)
4153 case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4154 case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4155 case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4158 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4159 val |= BIT0;
4161 wr_reg16(info, TCR, val);
4163 /* TPR (transmit preamble) */
4165 switch (info->params.preamble)
4167 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4168 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
4169 case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4170 case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break;
4171 case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break;
4172 default: val = 0x7e; break;
4174 wr_reg8(info, TPR, (unsigned char)val);
4176 /* RCR (rx control)
4178 * 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
4179 * 12..10 encoding
4180 * 09 CRC enable
4181 * 08 CRC32
4182 * 07..03 reserved, must be 0
4183 * 02 reset
4184 * 01 enable
4185 * 00 auto-DCD enable
4187 val = 0;
4189 switch(info->params.mode) {
4190 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4191 case MGSL_MODE_BISYNC: val |= BIT15; break;
4192 case MGSL_MODE_RAW: val |= BIT13; break;
4195 switch(info->params.encoding)
4197 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4198 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4199 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4200 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4201 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4202 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4203 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4206 switch (info->params.crc_type & HDLC_CRC_MASK)
4208 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4209 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4212 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4213 val |= BIT0;
4215 wr_reg16(info, RCR, val);
4217 /* CCR (clock control)
4219 * 07..05 tx clock source
4220 * 04..02 rx clock source
4221 * 01 auxclk enable
4222 * 00 BRG enable
4224 val = 0;
4226 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4228 // when RxC source is DPLL, BRG generates 16X DPLL
4229 // reference clock, so take TxC from BRG/16 to get
4230 // transmit clock at actual data rate
4231 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4232 val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */
4233 else
4234 val |= BIT6; /* 010, txclk = BRG */
4236 else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4237 val |= BIT7; /* 100, txclk = DPLL Input */
4238 else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4239 val |= BIT5; /* 001, txclk = RXC Input */
4241 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4242 val |= BIT3; /* 010, rxclk = BRG */
4243 else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4244 val |= BIT4; /* 100, rxclk = DPLL */
4245 else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4246 val |= BIT2; /* 001, rxclk = TXC Input */
4248 if (info->params.clock_speed)
4249 val |= BIT1 + BIT0;
4251 wr_reg8(info, CCR, (unsigned char)val);
4253 if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4255 // program DPLL mode
4256 switch(info->params.encoding)
4258 case HDLC_ENCODING_BIPHASE_MARK:
4259 case HDLC_ENCODING_BIPHASE_SPACE:
4260 val = BIT7; break;
4261 case HDLC_ENCODING_BIPHASE_LEVEL:
4262 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4263 val = BIT7 + BIT6; break;
4264 default: val = BIT6; // NRZ encodings
4266 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4268 // DPLL requires a 16X reference clock from BRG
4269 set_rate(info, info->params.clock_speed * 16);
4271 else
4272 set_rate(info, info->params.clock_speed);
4274 tx_set_idle(info);
4276 msc_set_vcr(info);
4278 /* SCR (serial control)
4280 * 15 1=tx req on FIFO half empty
4281 * 14 1=rx req on FIFO half full
4282 * 13 tx data IRQ enable
4283 * 12 tx idle IRQ enable
4284 * 11 underrun IRQ enable
4285 * 10 rx data IRQ enable
4286 * 09 rx idle IRQ enable
4287 * 08 overrun IRQ enable
4288 * 07 DSR IRQ enable
4289 * 06 CTS IRQ enable
4290 * 05 DCD IRQ enable
4291 * 04 RI IRQ enable
4292 * 03 reserved, must be zero
4293 * 02 1=txd->rxd internal loopback enable
4294 * 01 reserved, must be zero
4295 * 00 1=master IRQ enable
4297 wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4299 if (info->params.loopback)
4300 enable_loopback(info);
4304 * set transmit idle mode
4306 static void tx_set_idle(struct slgt_info *info)
4308 unsigned char val;
4309 unsigned short tcr;
4311 /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4312 * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4314 tcr = rd_reg16(info, TCR);
4315 if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4316 /* disable preamble, set idle size to 16 bits */
4317 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4318 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4319 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4320 } else if (!(tcr & BIT6)) {
4321 /* preamble is disabled, set idle size to 8 bits */
4322 tcr &= ~(BIT5 + BIT4);
4324 wr_reg16(info, TCR, tcr);
4326 if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4327 /* LSB of custom tx idle specified in tx idle register */
4328 val = (unsigned char)(info->idle_mode & 0xff);
4329 } else {
4330 /* standard 8 bit idle patterns */
4331 switch(info->idle_mode)
4333 case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
4334 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4335 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4336 case HDLC_TXIDLE_ZEROS:
4337 case HDLC_TXIDLE_SPACE: val = 0x00; break;
4338 default: val = 0xff;
4342 wr_reg8(info, TIR, val);
4346 * get state of V24 status (input) signals
4348 static void get_signals(struct slgt_info *info)
4350 unsigned short status = rd_reg16(info, SSR);
4352 /* clear all serial signals except DTR and RTS */
4353 info->signals &= SerialSignal_DTR + SerialSignal_RTS;
4355 if (status & BIT3)
4356 info->signals |= SerialSignal_DSR;
4357 if (status & BIT2)
4358 info->signals |= SerialSignal_CTS;
4359 if (status & BIT1)
4360 info->signals |= SerialSignal_DCD;
4361 if (status & BIT0)
4362 info->signals |= SerialSignal_RI;
4366 * set V.24 Control Register based on current configuration
4368 static void msc_set_vcr(struct slgt_info *info)
4370 unsigned char val = 0;
4372 /* VCR (V.24 control)
4374 * 07..04 serial IF select
4375 * 03 DTR
4376 * 02 RTS
4377 * 01 LL
4378 * 00 RL
4381 switch(info->if_mode & MGSL_INTERFACE_MASK)
4383 case MGSL_INTERFACE_RS232:
4384 val |= BIT5; /* 0010 */
4385 break;
4386 case MGSL_INTERFACE_V35:
4387 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4388 break;
4389 case MGSL_INTERFACE_RS422:
4390 val |= BIT6; /* 0100 */
4391 break;
4394 if (info->signals & SerialSignal_DTR)
4395 val |= BIT3;
4396 if (info->signals & SerialSignal_RTS)
4397 val |= BIT2;
4398 if (info->if_mode & MGSL_INTERFACE_LL)
4399 val |= BIT1;
4400 if (info->if_mode & MGSL_INTERFACE_RL)
4401 val |= BIT0;
4402 wr_reg8(info, VCR, val);
4406 * set state of V24 control (output) signals
4408 static void set_signals(struct slgt_info *info)
4410 unsigned char val = rd_reg8(info, VCR);
4411 if (info->signals & SerialSignal_DTR)
4412 val |= BIT3;
4413 else
4414 val &= ~BIT3;
4415 if (info->signals & SerialSignal_RTS)
4416 val |= BIT2;
4417 else
4418 val &= ~BIT2;
4419 wr_reg8(info, VCR, val);
4423 * free range of receive DMA buffers (i to last)
4425 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4427 int done = 0;
4429 while(!done) {
4430 /* reset current buffer for reuse */
4431 info->rbufs[i].status = 0;
4432 switch(info->params.mode) {
4433 case MGSL_MODE_RAW:
4434 case MGSL_MODE_MONOSYNC:
4435 case MGSL_MODE_BISYNC:
4436 set_desc_count(info->rbufs[i], info->raw_rx_size);
4437 break;
4438 default:
4439 set_desc_count(info->rbufs[i], DMABUFSIZE);
4442 if (i == last)
4443 done = 1;
4444 if (++i == info->rbuf_count)
4445 i = 0;
4447 info->rbuf_current = i;
4451 * mark all receive DMA buffers as free
4453 static void reset_rbufs(struct slgt_info *info)
4455 free_rbufs(info, 0, info->rbuf_count - 1);
4459 * pass receive HDLC frame to upper layer
4461 * return 1 if frame available, otherwise 0
4463 static int rx_get_frame(struct slgt_info *info)
4465 unsigned int start, end;
4466 unsigned short status;
4467 unsigned int framesize = 0;
4468 int rc = 0;
4469 unsigned long flags;
4470 struct tty_struct *tty = info->tty;
4471 unsigned char addr_field = 0xff;
4472 unsigned int crc_size = 0;
4474 switch (info->params.crc_type & HDLC_CRC_MASK) {
4475 case HDLC_CRC_16_CCITT: crc_size = 2; break;
4476 case HDLC_CRC_32_CCITT: crc_size = 4; break;
4479 check_again:
4481 framesize = 0;
4482 addr_field = 0xff;
4483 start = end = info->rbuf_current;
4485 for (;;) {
4486 if (!desc_complete(info->rbufs[end]))
4487 goto cleanup;
4489 if (framesize == 0 && info->params.addr_filter != 0xff)
4490 addr_field = info->rbufs[end].buf[0];
4492 framesize += desc_count(info->rbufs[end]);
4494 if (desc_eof(info->rbufs[end]))
4495 break;
4497 if (++end == info->rbuf_count)
4498 end = 0;
4500 if (end == info->rbuf_current) {
4501 if (info->rx_enabled){
4502 spin_lock_irqsave(&info->lock,flags);
4503 rx_start(info);
4504 spin_unlock_irqrestore(&info->lock,flags);
4506 goto cleanup;
4510 /* status
4512 * 15 buffer complete
4513 * 14..06 reserved
4514 * 05..04 residue
4515 * 02 eof (end of frame)
4516 * 01 CRC error
4517 * 00 abort
4519 status = desc_status(info->rbufs[end]);
4521 /* ignore CRC bit if not using CRC (bit is undefined) */
4522 if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4523 status &= ~BIT1;
4525 if (framesize == 0 ||
4526 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4527 free_rbufs(info, start, end);
4528 goto check_again;
4531 if (framesize < (2 + crc_size) || status & BIT0) {
4532 info->icount.rxshort++;
4533 framesize = 0;
4534 } else if (status & BIT1) {
4535 info->icount.rxcrc++;
4536 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4537 framesize = 0;
4540 #if SYNCLINK_GENERIC_HDLC
4541 if (framesize == 0) {
4542 struct net_device_stats *stats = hdlc_stats(info->netdev);
4543 stats->rx_errors++;
4544 stats->rx_frame_errors++;
4546 #endif
4548 DBGBH(("%s rx frame status=%04X size=%d\n",
4549 info->device_name, status, framesize));
4550 DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, DMABUFSIZE), "rx");
4552 if (framesize) {
4553 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4554 framesize -= crc_size;
4555 crc_size = 0;
4558 if (framesize > info->max_frame_size + crc_size)
4559 info->icount.rxlong++;
4560 else {
4561 /* copy dma buffer(s) to contiguous temp buffer */
4562 int copy_count = framesize;
4563 int i = start;
4564 unsigned char *p = info->tmp_rbuf;
4565 info->tmp_rbuf_count = framesize;
4567 info->icount.rxok++;
4569 while(copy_count) {
4570 int partial_count = min(copy_count, DMABUFSIZE);
4571 memcpy(p, info->rbufs[i].buf, partial_count);
4572 p += partial_count;
4573 copy_count -= partial_count;
4574 if (++i == info->rbuf_count)
4575 i = 0;
4578 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4579 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4580 framesize++;
4583 #if SYNCLINK_GENERIC_HDLC
4584 if (info->netcount)
4585 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4586 else
4587 #endif
4588 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4591 free_rbufs(info, start, end);
4592 rc = 1;
4594 cleanup:
4595 return rc;
4599 * pass receive buffer (RAW synchronous mode) to tty layer
4600 * return 1 if buffer available, otherwise 0
4602 static int rx_get_buf(struct slgt_info *info)
4604 unsigned int i = info->rbuf_current;
4605 unsigned int count;
4607 if (!desc_complete(info->rbufs[i]))
4608 return 0;
4609 count = desc_count(info->rbufs[i]);
4610 switch(info->params.mode) {
4611 case MGSL_MODE_MONOSYNC:
4612 case MGSL_MODE_BISYNC:
4613 /* ignore residue in byte synchronous modes */
4614 if (desc_residue(info->rbufs[i]))
4615 count--;
4616 break;
4618 DBGDATA(info, info->rbufs[i].buf, count, "rx");
4619 DBGINFO(("rx_get_buf size=%d\n", count));
4620 if (count)
4621 ldisc_receive_buf(info->tty, info->rbufs[i].buf,
4622 info->flag_buf, count);
4623 free_rbufs(info, i, i);
4624 return 1;
4627 static void reset_tbufs(struct slgt_info *info)
4629 unsigned int i;
4630 info->tbuf_current = 0;
4631 for (i=0 ; i < info->tbuf_count ; i++) {
4632 info->tbufs[i].status = 0;
4633 info->tbufs[i].count = 0;
4638 * return number of free transmit DMA buffers
4640 static unsigned int free_tbuf_count(struct slgt_info *info)
4642 unsigned int count = 0;
4643 unsigned int i = info->tbuf_current;
4647 if (desc_count(info->tbufs[i]))
4648 break; /* buffer in use */
4649 ++count;
4650 if (++i == info->tbuf_count)
4651 i=0;
4652 } while (i != info->tbuf_current);
4654 /* last buffer with zero count may be in use, assume it is */
4655 if (count)
4656 --count;
4658 return count;
4662 * load transmit DMA buffer(s) with data
4664 static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4666 unsigned short count;
4667 unsigned int i;
4668 struct slgt_desc *d;
4670 if (size == 0)
4671 return;
4673 DBGDATA(info, buf, size, "tx");
4675 info->tbuf_start = i = info->tbuf_current;
4677 while (size) {
4678 d = &info->tbufs[i];
4679 if (++i == info->tbuf_count)
4680 i = 0;
4682 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4683 memcpy(d->buf, buf, count);
4685 size -= count;
4686 buf += count;
4689 * set EOF bit for last buffer of HDLC frame or
4690 * for every buffer in raw mode
4692 if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
4693 info->params.mode == MGSL_MODE_RAW)
4694 set_desc_eof(*d, 1);
4695 else
4696 set_desc_eof(*d, 0);
4698 set_desc_count(*d, count);
4701 info->tbuf_current = i;
4704 static int register_test(struct slgt_info *info)
4706 static unsigned short patterns[] =
4707 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4708 static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
4709 unsigned int i;
4710 int rc = 0;
4712 for (i=0 ; i < count ; i++) {
4713 wr_reg16(info, TIR, patterns[i]);
4714 wr_reg16(info, BDR, patterns[(i+1)%count]);
4715 if ((rd_reg16(info, TIR) != patterns[i]) ||
4716 (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4717 rc = -ENODEV;
4718 break;
4721 info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4722 info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4723 return rc;
4726 static int irq_test(struct slgt_info *info)
4728 unsigned long timeout;
4729 unsigned long flags;
4730 struct tty_struct *oldtty = info->tty;
4731 u32 speed = info->params.data_rate;
4733 info->params.data_rate = 921600;
4734 info->tty = NULL;
4736 spin_lock_irqsave(&info->lock, flags);
4737 async_mode(info);
4738 slgt_irq_on(info, IRQ_TXIDLE);
4740 /* enable transmitter */
4741 wr_reg16(info, TCR,
4742 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4744 /* write one byte and wait for tx idle */
4745 wr_reg16(info, TDR, 0);
4747 /* assume failure */
4748 info->init_error = DiagStatus_IrqFailure;
4749 info->irq_occurred = FALSE;
4751 spin_unlock_irqrestore(&info->lock, flags);
4753 timeout=100;
4754 while(timeout-- && !info->irq_occurred)
4755 msleep_interruptible(10);
4757 spin_lock_irqsave(&info->lock,flags);
4758 reset_port(info);
4759 spin_unlock_irqrestore(&info->lock,flags);
4761 info->params.data_rate = speed;
4762 info->tty = oldtty;
4764 info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
4765 return info->irq_occurred ? 0 : -ENODEV;
4768 static int loopback_test_rx(struct slgt_info *info)
4770 unsigned char *src, *dest;
4771 int count;
4773 if (desc_complete(info->rbufs[0])) {
4774 count = desc_count(info->rbufs[0]);
4775 src = info->rbufs[0].buf;
4776 dest = info->tmp_rbuf;
4778 for( ; count ; count-=2, src+=2) {
4779 /* src=data byte (src+1)=status byte */
4780 if (!(*(src+1) & (BIT9 + BIT8))) {
4781 *dest = *src;
4782 dest++;
4783 info->tmp_rbuf_count++;
4786 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
4787 return 1;
4789 return 0;
4792 static int loopback_test(struct slgt_info *info)
4794 #define TESTFRAMESIZE 20
4796 unsigned long timeout;
4797 u16 count = TESTFRAMESIZE;
4798 unsigned char buf[TESTFRAMESIZE];
4799 int rc = -ENODEV;
4800 unsigned long flags;
4802 struct tty_struct *oldtty = info->tty;
4803 MGSL_PARAMS params;
4805 memcpy(&params, &info->params, sizeof(params));
4807 info->params.mode = MGSL_MODE_ASYNC;
4808 info->params.data_rate = 921600;
4809 info->params.loopback = 1;
4810 info->tty = NULL;
4812 /* build and send transmit frame */
4813 for (count = 0; count < TESTFRAMESIZE; ++count)
4814 buf[count] = (unsigned char)count;
4816 info->tmp_rbuf_count = 0;
4817 memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
4819 /* program hardware for HDLC and enabled receiver */
4820 spin_lock_irqsave(&info->lock,flags);
4821 async_mode(info);
4822 rx_start(info);
4823 info->tx_count = count;
4824 tx_load(info, buf, count);
4825 tx_start(info);
4826 spin_unlock_irqrestore(&info->lock, flags);
4828 /* wait for receive complete */
4829 for (timeout = 100; timeout; --timeout) {
4830 msleep_interruptible(10);
4831 if (loopback_test_rx(info)) {
4832 rc = 0;
4833 break;
4837 /* verify received frame length and contents */
4838 if (!rc && (info->tmp_rbuf_count != count ||
4839 memcmp(buf, info->tmp_rbuf, count))) {
4840 rc = -ENODEV;
4843 spin_lock_irqsave(&info->lock,flags);
4844 reset_adapter(info);
4845 spin_unlock_irqrestore(&info->lock,flags);
4847 memcpy(&info->params, &params, sizeof(info->params));
4848 info->tty = oldtty;
4850 info->init_error = rc ? DiagStatus_DmaFailure : 0;
4851 return rc;
4854 static int adapter_test(struct slgt_info *info)
4856 DBGINFO(("testing %s\n", info->device_name));
4857 if (register_test(info) < 0) {
4858 printk("register test failure %s addr=%08X\n",
4859 info->device_name, info->phys_reg_addr);
4860 } else if (irq_test(info) < 0) {
4861 printk("IRQ test failure %s IRQ=%d\n",
4862 info->device_name, info->irq_level);
4863 } else if (loopback_test(info) < 0) {
4864 printk("loopback test failure %s\n", info->device_name);
4866 return info->init_error;
4870 * transmit timeout handler
4872 static void tx_timeout(unsigned long context)
4874 struct slgt_info *info = (struct slgt_info*)context;
4875 unsigned long flags;
4877 DBGINFO(("%s tx_timeout\n", info->device_name));
4878 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
4879 info->icount.txtimeout++;
4881 spin_lock_irqsave(&info->lock,flags);
4882 info->tx_active = 0;
4883 info->tx_count = 0;
4884 spin_unlock_irqrestore(&info->lock,flags);
4886 #if SYNCLINK_GENERIC_HDLC
4887 if (info->netcount)
4888 hdlcdev_tx_done(info);
4889 else
4890 #endif
4891 bh_transmit(info);
4895 * receive buffer polling timer
4897 static void rx_timeout(unsigned long context)
4899 struct slgt_info *info = (struct slgt_info*)context;
4900 unsigned long flags;
4902 DBGINFO(("%s rx_timeout\n", info->device_name));
4903 spin_lock_irqsave(&info->lock, flags);
4904 info->pending_bh |= BH_RECEIVE;
4905 spin_unlock_irqrestore(&info->lock, flags);
4906 bh_handler(&info->task);