signal/timer/event: signalfd wire up x86 arches
[linux-2.6.22.y-op.git] / kernel / latency.c
blobe63fcacb61a7f0d60ec3fe940a84c0c193898c8a
1 /*
2 * latency.c: Explicit system-wide latency-expectation infrastructure
4 * The purpose of this infrastructure is to allow device drivers to set
5 * latency constraint they have and to collect and summarize these
6 * expectations globally. The cummulated result can then be used by
7 * power management and similar users to make decisions that have
8 * tradoffs with a latency component.
10 * An example user of this are the x86 C-states; each higher C state saves
11 * more power, but has a higher exit latency. For the idle loop power
12 * code to make a good decision which C-state to use, information about
13 * acceptable latencies is required.
15 * An example announcer of latency is an audio driver that knowns it
16 * will get an interrupt when the hardware has 200 usec of samples
17 * left in the DMA buffer; in that case the driver can set a latency
18 * constraint of, say, 150 usec.
20 * Multiple drivers can each announce their maximum accepted latency,
21 * to keep these appart, a string based identifier is used.
24 * (C) Copyright 2006 Intel Corporation
25 * Author: Arjan van de Ven <arjan@linux.intel.com>
27 * This program is free software; you can redistribute it and/or
28 * modify it under the terms of the GNU General Public License
29 * as published by the Free Software Foundation; version 2
30 * of the License.
33 #include <linux/latency.h>
34 #include <linux/list.h>
35 #include <linux/spinlock.h>
36 #include <linux/slab.h>
37 #include <linux/module.h>
38 #include <linux/notifier.h>
39 #include <linux/jiffies.h>
40 #include <asm/atomic.h>
42 struct latency_info {
43 struct list_head list;
44 int usecs;
45 char *identifier;
49 * locking rule: all modifications to current_max_latency and
50 * latency_list need to be done while holding the latency_lock.
51 * latency_lock needs to be taken _irqsave.
53 static atomic_t current_max_latency;
54 static DEFINE_SPINLOCK(latency_lock);
56 static LIST_HEAD(latency_list);
57 static BLOCKING_NOTIFIER_HEAD(latency_notifier);
60 * This function returns the maximum latency allowed, which
61 * happens to be the minimum of all maximum latencies on the
62 * list.
64 static int __find_max_latency(void)
66 int min = INFINITE_LATENCY;
67 struct latency_info *info;
69 list_for_each_entry(info, &latency_list, list) {
70 if (info->usecs < min)
71 min = info->usecs;
73 return min;
76 /**
77 * set_acceptable_latency - sets the maximum latency acceptable
78 * @identifier: string that identifies this driver
79 * @usecs: maximum acceptable latency for this driver
81 * This function informs the kernel that this device(driver)
82 * can accept at most usecs latency. This setting is used for
83 * power management and similar tradeoffs.
85 * This function sleeps and can only be called from process
86 * context.
87 * Calling this function with an existing identifier is valid
88 * and will cause the existing latency setting to be changed.
90 void set_acceptable_latency(char *identifier, int usecs)
92 struct latency_info *info, *iter;
93 unsigned long flags;
94 int found_old = 0;
96 info = kzalloc(sizeof(struct latency_info), GFP_KERNEL);
97 if (!info)
98 return;
99 info->usecs = usecs;
100 info->identifier = kstrdup(identifier, GFP_KERNEL);
101 if (!info->identifier)
102 goto free_info;
104 spin_lock_irqsave(&latency_lock, flags);
105 list_for_each_entry(iter, &latency_list, list) {
106 if (strcmp(iter->identifier, identifier)==0) {
107 found_old = 1;
108 iter->usecs = usecs;
109 break;
112 if (!found_old)
113 list_add(&info->list, &latency_list);
115 if (usecs < atomic_read(&current_max_latency))
116 atomic_set(&current_max_latency, usecs);
118 spin_unlock_irqrestore(&latency_lock, flags);
120 blocking_notifier_call_chain(&latency_notifier,
121 atomic_read(&current_max_latency), NULL);
124 * if we inserted the new one, we're done; otherwise there was
125 * an existing one so we need to free the redundant data
127 if (!found_old)
128 return;
130 kfree(info->identifier);
131 free_info:
132 kfree(info);
134 EXPORT_SYMBOL_GPL(set_acceptable_latency);
137 * modify_acceptable_latency - changes the maximum latency acceptable
138 * @identifier: string that identifies this driver
139 * @usecs: maximum acceptable latency for this driver
141 * This function informs the kernel that this device(driver)
142 * can accept at most usecs latency. This setting is used for
143 * power management and similar tradeoffs.
145 * This function does not sleep and can be called in any context.
146 * Trying to use a non-existing identifier silently gets ignored.
148 * Due to the atomic nature of this function, the modified latency
149 * value will only be used for future decisions; past decisions
150 * can still lead to longer latencies in the near future.
152 void modify_acceptable_latency(char *identifier, int usecs)
154 struct latency_info *iter;
155 unsigned long flags;
157 spin_lock_irqsave(&latency_lock, flags);
158 list_for_each_entry(iter, &latency_list, list) {
159 if (strcmp(iter->identifier, identifier) == 0) {
160 iter->usecs = usecs;
161 break;
164 if (usecs < atomic_read(&current_max_latency))
165 atomic_set(&current_max_latency, usecs);
166 spin_unlock_irqrestore(&latency_lock, flags);
168 EXPORT_SYMBOL_GPL(modify_acceptable_latency);
171 * remove_acceptable_latency - removes the maximum latency acceptable
172 * @identifier: string that identifies this driver
174 * This function removes a previously set maximum latency setting
175 * for the driver and frees up any resources associated with the
176 * bookkeeping needed for this.
178 * This function does not sleep and can be called in any context.
179 * Trying to use a non-existing identifier silently gets ignored.
181 void remove_acceptable_latency(char *identifier)
183 unsigned long flags;
184 int newmax = 0;
185 struct latency_info *iter, *temp;
187 spin_lock_irqsave(&latency_lock, flags);
189 list_for_each_entry_safe(iter, temp, &latency_list, list) {
190 if (strcmp(iter->identifier, identifier) == 0) {
191 list_del(&iter->list);
192 newmax = iter->usecs;
193 kfree(iter->identifier);
194 kfree(iter);
195 break;
199 /* If we just deleted the system wide value, we need to
200 * recalculate with a full search
202 if (newmax == atomic_read(&current_max_latency)) {
203 newmax = __find_max_latency();
204 atomic_set(&current_max_latency, newmax);
206 spin_unlock_irqrestore(&latency_lock, flags);
208 EXPORT_SYMBOL_GPL(remove_acceptable_latency);
211 * system_latency_constraint - queries the system wide latency maximum
213 * This function returns the system wide maximum latency in
214 * microseconds.
216 * This function does not sleep and can be called in any context.
218 int system_latency_constraint(void)
220 return atomic_read(&current_max_latency);
222 EXPORT_SYMBOL_GPL(system_latency_constraint);
225 * synchronize_acceptable_latency - recalculates all latency decisions
227 * This function will cause a callback to various kernel pieces that
228 * will make those pieces rethink their latency decisions. This implies
229 * that if there are overlong latencies in hardware state already, those
230 * latencies get taken right now. When this call completes no overlong
231 * latency decisions should be active anymore.
233 * Typical usecase of this is after a modify_acceptable_latency() call,
234 * which in itself is non-blocking and non-synchronizing.
236 * This function blocks and should not be called with locks held.
239 void synchronize_acceptable_latency(void)
241 blocking_notifier_call_chain(&latency_notifier,
242 atomic_read(&current_max_latency), NULL);
244 EXPORT_SYMBOL_GPL(synchronize_acceptable_latency);
247 * Latency notifier: this notifier gets called when a non-atomic new
248 * latency value gets set. The expectation nof the caller of the
249 * non-atomic set is that when the call returns, future latencies
250 * are within bounds, so the functions on the notifier list are
251 * expected to take the overlong latencies immediately, inside the
252 * callback, and not make a overlong latency decision anymore.
254 * The callback gets called when the new latency value is made
255 * active so system_latency_constraint() returns the new latency.
257 int register_latency_notifier(struct notifier_block * nb)
259 return blocking_notifier_chain_register(&latency_notifier, nb);
261 EXPORT_SYMBOL_GPL(register_latency_notifier);
263 int unregister_latency_notifier(struct notifier_block * nb)
265 return blocking_notifier_chain_unregister(&latency_notifier, nb);
267 EXPORT_SYMBOL_GPL(unregister_latency_notifier);
269 static __init int latency_init(void)
271 atomic_set(&current_max_latency, INFINITE_LATENCY);
273 * we don't want by default to have longer latencies than 2 ticks,
274 * since that would cause lost ticks
276 set_acceptable_latency("kernel", 2*1000000/HZ);
277 return 0;
280 module_init(latency_init);