1 /*****************************************************************************
3 * ESS Maestro/Maestro-2/Maestro-2E driver for Linux 2.[23].x
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 * (c) Copyright 1999 Alan Cox <alan.cox@linux.org>
21 * Based heavily on SonicVibes.c:
22 * Copyright (C) 1998-1999 Thomas Sailer (sailer@ife.ee.ethz.ch)
24 * Heavily modified by Zach Brown <zab@zabbo.net> based on lunch
25 * with ESS engineers. Many thanks to Howard Kim for providing
26 * contacts and hardware. Honorable mention goes to Eric
27 * Brombaugh for all sorts of things. Best regards to the
28 * proprietors of Hack Central for fine lodging.
31 * /dev/dsp0-3 standard /dev/dsp device, (mostly) OSS compatible
32 * /dev/mixer standard /dev/mixer device, (mostly) OSS compatible
34 * Hardware Description
36 * A working Maestro setup contains the Maestro chip wired to a
37 * codec or 2. In the Maestro we have the APUs, the ASSP, and the
38 * Wavecache. The APUs can be though of as virtual audio routing
39 * channels. They can take data from a number of sources and perform
40 * basic encodings of the data. The wavecache is a storehouse for
41 * PCM data. Typically it deals with PCI and interracts with the
42 * APUs. The ASSP is a wacky DSP like device that ESS is loth
43 * to release docs on. Thankfully it isn't required on the Maestro
44 * until you start doing insane things like FM emulation and surround
45 * encoding. The codecs are almost always AC-97 compliant codecs,
46 * but it appears that early Maestros may have had PT101 (an ESS
47 * part?) wired to them. The only real difference in the Maestro
48 * families is external goop like docking capability, memory for
49 * the ASSP, and initialization differences.
53 * We only drive the APU/Wavecache as typical DACs and drive the
54 * mixers in the codecs. There are 64 APUs. We assign 6 to each
55 * /dev/dsp? device. 2 channels for output, and 4 channels for
58 * Each APU can do a number of things, but we only really use
59 * 3 basic functions. For playback we use them to convert PCM
60 * data fetched over PCI by the wavecahche into analog data that
61 * is handed to the codec. One APU for mono, and a pair for stereo.
62 * When in stereo, the combination of smarts in the APU and Wavecache
63 * decide which wavecache gets the left or right channel.
65 * For record we still use the old overly mono system. For each in
66 * coming channel the data comes in from the codec, through a 'input'
67 * APU, through another rate converter APU, and then into memory via
68 * the wavecache and PCI. If its stereo, we mash it back into LRLR in
69 * software. The pass between the 2 APUs is supposedly what requires us
70 * to have a 512 byte buffer sitting around in wavecache/memory.
72 * The wavecache makes our life even more fun. First off, it can
73 * only address the first 28 bits of PCI address space, making it
74 * useless on quite a few architectures. Secondly, its insane.
75 * It claims to fetch from 4 regions of PCI space, each 4 meg in length.
76 * But that doesn't really work. You can only use 1 region. So all our
77 * allocations have to be in 4meg of each other. Booo. Hiss.
78 * So we have a module parameter, dsps_order, that is the order of
79 * the number of dsps to provide. All their buffer space is allocated
80 * on open time. The sonicvibes OSS routines we inherited really want
81 * power of 2 buffers, so we have all those next to each other, then
82 * 512 byte regions for the recording wavecaches. This ends up
83 * wasting quite a bit of memory. The only fixes I can see would be
84 * getting a kernel allocator that could work in zones, or figuring out
85 * just how to coerce the WP into doing what we want.
87 * The indirection of the various registers means we have to spinlock
88 * nearly all register accesses. We have the main register indirection
89 * like the wave cache, maestro registers, etc. Then we have beasts
90 * like the APU interface that is indirect registers gotten at through
91 * the main maestro indirection. Ouch. We spinlock around the actual
92 * ports on a per card basis. This means spinlock activity at each IO
93 * operation, but the only IO operation clusters are in non critical
94 * paths and it makes the code far easier to follow. Interrupts are
95 * blocked while holding the locks because the int handler has to
96 * get at some of them :(. The mixer interface doesn't, however.
97 * We also have an OSS state lock that is thrown around in a few
100 * This driver has brute force APM suspend support. We catch suspend
101 * notifications and stop all work being done on the chip. Any people
102 * that try between this shutdown and the real suspend operation will
103 * be put to sleep. When we resume we restore our software state on
104 * the chip and wake up the people that were using it. The code thats
105 * being used now is quite dirty and assumes we're on a uni-processor
106 * machine. Much of it will need to be cleaned up for SMP ACPI or
109 * We also pay attention to PCI power management now. The driver
110 * will power down units of the chip that it knows aren't needed.
111 * The WaveProcessor and company are only powered on when people
112 * have /dev/dsp*s open. On removal the driver will
113 * power down the maestro entirely. There could still be
114 * trouble with BIOSen that magically change power states
115 * themselves, but we'll see.
118 * v0.15 - May 21 2001 - Marcus Meissner <mm@caldera.de>
119 * Ported to Linux 2.4 PCI API. Some clean ups, global devs list
120 * removed (now using pci device driver data).
121 * PM needs to be polished still. Bumped version.
122 * (still kind of v0.14) May 13 2001 - Ben Pfaff <pfaffben@msu.edu>
123 * Add support for 978 docking and basic hardware volume control
124 * (still kind of v0.14) Nov 23 - Alan Cox <alan@redhat.com>
125 * Add clocking= for people with seriously warped hardware
126 * (still v0.14) Nov 10 2000 - Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
127 * add __init to maestro_ac97_init() and maestro_install()
128 * (still based on v0.14) Mar 29 2000 - Zach Brown <zab@redhat.com>
129 * move to 2.3 power management interface, which
130 * required hacking some suspend/resume/check paths
131 * make static compilation work
132 * v0.14 - Jan 28 2000 - Zach Brown <zab@redhat.com>
133 * add PCI power management through ACPI regs.
134 * we now shut down on machine reboot/halt
135 * leave scary PCI config items alone (isa stuff, mostly)
136 * enable 1921s, it seems only mine was broke.
137 * fix swapped left/right pcm dac. har har.
138 * up bob freq, increase buffers, fix pointers at underflow
139 * silly compilation problems
140 * v0.13 - Nov 18 1999 - Zach Brown <zab@redhat.com>
141 * fix nec Versas? man would that be cool.
142 * v0.12 - Nov 12 1999 - Zach Brown <zab@redhat.com>
143 * brown bag volume max fix..
144 * v0.11 - Nov 11 1999 - Zach Brown <zab@redhat.com>
145 * use proper stereo apu decoding, mmap/write should work.
146 * make volume sliders more useful, tweak rate calculation.
147 * fix lame 8bit format reporting bug. duh. apm apu saving buglet also
148 * fix maestro 1 clock freq "bug", remove pt101 support
149 * v0.10 - Oct 28 1999 - Zach Brown <zab@redhat.com>
150 * aha, so, sometimes the WP writes a status word to offset 0
151 * from one of the PCMBARs. rearrange allocation accordingly..
152 * cheers again to Eric for being a good hacker in investigating this.
153 * Jeroen Hoogervorst submits 7500 fix out of nowhere. yay. :)
154 * v0.09 - Oct 23 1999 - Zach Brown <zab@redhat.com>
156 * re-order something such that some 2Es now work. Magic!
157 * new codec reset routine. made some codecs come to life.
158 * fix clear_advance, sync some control with ESS.
159 * now write to all base regs to be paranoid.
160 * v0.08 - Oct 20 1999 - Zach Brown <zab@redhat.com>
161 * Fix initial buflen bug. I am so smart. also smp compiling..
162 * I owe Eric yet another beer: fixed recmask, igain,
163 * muting, and adc sync consistency. Go Team.
164 * v0.07 - Oct 4 1999 - Zach Brown <zab@redhat.com>
165 * tweak adc/dac, formating, and stuff to allow full duplex
166 * allocate dsps memory at open() so we can fit in the wavecache window
167 * fix wavecache braindamage. again. no more scribbling?
168 * fix ess 1921 codec bug on some laptops.
169 * fix dumb pci scanning bug
170 * started 2.3 cleanup, redid spinlocks, little cleanups
171 * v0.06 - Sep 20 1999 - Zach Brown <zab@redhat.com>
172 * fix wavecache thinkos. limit to 1 /dev/dsp.
173 * eric is wearing his thinking toque this week.
174 * spotted apu mode bugs and gain ramping problem
175 * don't touch weird mixer regs, make recmask optional
176 * fixed igain inversion, defaults for mixers, clean up rec_start
177 * make mono recording work.
178 * report subsystem stuff, please send reports.
179 * littles: parallel out, amp now
180 * v0.05 - Sep 17 1999 - Zach Brown <zab@redhat.com>
181 * merged and fixed up Eric's initial recording code
182 * munged format handling to catch misuse, needs rewrite.
183 * revert ring bus init, fixup shared int, add pci busmaster setting
184 * fix mixer oss interface, fix mic mute and recmask
185 * mask off unsupported mixers, reset with all 1s, modularize defaults
186 * make sure bob is running while we need it
187 * got rid of device limit, initial minimal apm hooks
188 * pull out dead code/includes, only allow multimedia/audio maestros
189 * v0.04 - Sep 01 1999 - Zach Brown <zab@redhat.com>
190 * copied memory leak fix from sonicvibes driver
191 * different ac97 reset, play with 2.0 ac97, simplify ring bus setup
192 * bob freq code, region sanity, jitter sync fix; all from Eric
197 * do smart things with ac97 2.0 bits.
201 * it also would be fun to have a mode that would not use pci dma at all
202 * but would copy into the wavecache on board memory and use that
203 * on architectures that don't like the maestro's pci dma ickiness.
206 /*****************************************************************************/
208 #include <linux/module.h>
209 #include <linux/sched.h>
210 #include <linux/smp_lock.h>
211 #include <linux/string.h>
212 #include <linux/ctype.h>
213 #include <linux/ioport.h>
214 #include <linux/delay.h>
215 #include <linux/sound.h>
216 #include <linux/slab.h>
217 #include <linux/soundcard.h>
218 #include <linux/pci.h>
219 #include <linux/spinlock.h>
220 #include <linux/init.h>
221 #include <linux/interrupt.h>
222 #include <linux/poll.h>
223 #include <linux/reboot.h>
224 #include <linux/bitops.h>
225 #include <linux/wait.h>
227 #include <asm/current.h>
230 #include <asm/page.h>
231 #include <asm/uaccess.h>
235 static struct pci_driver maestro_pci_driver
;
237 /* --------------------------------------------------------------------- */
243 #define M_printk(args...) {if (debug) printk(args);}
248 /* we try to setup 2^(dsps_order) /dev/dsp devices */
249 static int dsps_order
;
250 /* whether or not we mess around with power management */
251 static int use_pm
=2; /* set to 1 for force */
252 /* clocking for broken hardware - a few laptops seem to use a 50Khz clock
253 ie insmod with clocking=50000 or so */
255 static int clocking
=48000;
257 MODULE_AUTHOR("Zach Brown <zab@zabbo.net>, Alan Cox <alan@redhat.com>");
258 MODULE_DESCRIPTION("ESS Maestro Driver");
259 MODULE_LICENSE("GPL");
262 module_param(debug
, bool, 0644);
264 module_param(dsps_order
, int, 0);
265 module_param(use_pm
, int, 0);
266 module_param(clocking
, int, 0);
268 /* --------------------------------------------------------------------- */
269 #define DRIVER_VERSION "0.15"
271 #ifndef PCI_VENDOR_ESS
272 #define PCI_VENDOR_ESS 0x125D
273 #define PCI_DEVICE_ID_ESS_ESS1968 0x1968 /* Maestro 2 */
274 #define PCI_DEVICE_ID_ESS_ESS1978 0x1978 /* Maestro 2E */
276 #define PCI_VENDOR_ESS_OLD 0x1285 /* Platform Tech,
277 the people the maestro
279 #define PCI_DEVICE_ID_ESS_ESS0100 0x0100 /* maestro 1 */
280 #endif /* PCI_VENDOR_ESS */
282 #define ESS_CHAN_HARD 0x100
285 #define NEC_VERSA_SUBID1 0x80581033
286 #define NEC_VERSA_SUBID2 0x803c1033
289 /* changed so that I could actually find all the
290 references and fix them up. it's a little more readable now. */
291 #define ESS_FMT_STEREO 0x01
292 #define ESS_FMT_16BIT 0x02
293 #define ESS_FMT_MASK 0x03
294 #define ESS_DAC_SHIFT 0
295 #define ESS_ADC_SHIFT 4
297 #define ESS_STATE_MAGIC 0x125D1968
298 #define ESS_CARD_MAGIC 0x19283746
300 #define DAC_RUNNING 1
301 #define ADC_RUNNING 2
303 #define MAX_DSP_ORDER 2
304 #define MAX_DSPS (1<<MAX_DSP_ORDER)
305 #define NR_DSPS (1<<dsps_order)
309 #define NR_APU_REGS 16
319 /* bits in the acpi masks */
320 #define ACPI_12MHZ ( 1 << 15)
321 #define ACPI_24MHZ ( 1 << 14)
322 #define ACPI_978 ( 1 << 13)
323 #define ACPI_SPDIF ( 1 << 12)
324 #define ACPI_GLUE ( 1 << 11)
325 #define ACPI__10 ( 1 << 10) /* reserved */
326 #define ACPI_PCIINT ( 1 << 9)
327 #define ACPI_HV ( 1 << 8) /* hardware volume */
328 #define ACPI_GPIO ( 1 << 7)
329 #define ACPI_ASSP ( 1 << 6)
330 #define ACPI_SB ( 1 << 5) /* sb emul */
331 #define ACPI_FM ( 1 << 4) /* fm emul */
332 #define ACPI_RB ( 1 << 3) /* ringbus / aclink */
333 #define ACPI_MIDI ( 1 << 2)
334 #define ACPI_GP ( 1 << 1) /* game port */
335 #define ACPI_WP ( 1 << 0) /* wave processor */
337 #define ACPI_ALL (0xffff)
338 #define ACPI_SLEEP (~(ACPI_SPDIF|ACPI_ASSP|ACPI_SB|ACPI_FM| \
339 ACPI_MIDI|ACPI_GP|ACPI_WP))
340 #define ACPI_NONE (ACPI__10)
342 /* these masks indicate which units we care about at
344 static u16 acpi_state_mask
[] = {
345 [ACPI_D0
] = ACPI_ALL
,
346 [ACPI_D1
] = ACPI_SLEEP
,
347 [ACPI_D2
] = ACPI_SLEEP
,
348 [ACPI_D3
] = ACPI_NONE
351 static char version
[] __devinitdata
=
352 KERN_INFO
"maestro: version " DRIVER_VERSION
" time " __TIME__
" " __DATE__
"\n";
356 static const unsigned sample_size
[] = { 1, 2, 2, 4 };
357 static const unsigned sample_shift
[] = { 0, 1, 1, 2 };
365 static const char *card_names
[]={
366 [TYPE_MAESTRO
] = "ESS Maestro",
367 [TYPE_MAESTRO2
] = "ESS Maestro 2",
368 [TYPE_MAESTRO2E
] = "ESS Maestro 2E"
371 static int clock_freq
[]={
372 [TYPE_MAESTRO
] = (49152000L / 1024L),
373 [TYPE_MAESTRO2
] = (50000000L / 1024L),
374 [TYPE_MAESTRO2E
] = (50000000L / 1024L)
377 static int maestro_notifier(struct notifier_block
*nb
, unsigned long event
, void *buf
);
379 static struct notifier_block maestro_nb
= {maestro_notifier
, NULL
, 0};
381 /* --------------------------------------------------------------------- */
385 /* FIXME: we probably want submixers in here, but only one record pair */
386 u8 apu
[6]; /* l/r output, l/r intput converters, l/r input apus */
387 u8 apu_mode
[6]; /* Running mode for this APU */
388 u8 apu_pan
[6]; /* Panning setup for this APU */
389 u32 apu_base
[6]; /* base address for this apu */
390 struct ess_card
*card
; /* Card info */
392 unsigned int rateadc
, ratedac
;
393 unsigned char fmt
, enable
;
397 /* this locks around the oss state in the driver */
399 /* only let 1 be opening at a time */
400 struct semaphore open_sem
;
401 wait_queue_head_t open_wait
;
404 /* soundcore stuff */
412 /* XXX zab - swptr only in here so that it can be referenced by
413 clear_advance, as far as I can tell :( */
414 unsigned hwptr
, swptr
;
415 unsigned total_bytes
;
417 unsigned error
; /* over/underrun */
418 wait_queue_head_t wait
;
419 /* redundant, but makes calculations easier */
422 unsigned fragsamples
;
425 unsigned ready
:1; /* our oss buffers are ready to go */
426 unsigned endcleared
:1;
427 unsigned ossfragshift
;
429 unsigned subdivision
;
430 u16 base
; /* Offset for ptr */
433 /* pointer to each dsp?s piece of the apu->src buffer page */
441 /* We keep maestro cards in a linked list */
442 struct ess_card
*next
;
448 /* as most of this is static,
449 perhaps it should be a pointer to a global struct */
452 int supported_mixers
;
455 /* the caller must guarantee arg sanity before calling these */
456 /* int (*read_mixer)(struct ess_card *card, int index);*/
457 void (*write_mixer
)(struct ess_card
*card
,int mixer
, unsigned int left
,unsigned int right
);
458 int (*recmask_io
)(struct ess_card
*card
,int rw
,int mask
);
459 unsigned int mixer_state
[SOUND_MIXER_NRDEVICES
];
465 wait_queue_head_t suspend_queue
;
467 struct ess_state channels
[MAX_DSPS
];
468 u16 maestro_map
[NR_IDRS
]; /* Register map */
469 /* we have to store this junk so that we can come back from a
471 u16 apu_map
[NR_APUS
][NR_APU_REGS
]; /* contents of apu regs */
473 /* this locks around the physical registers on the card */
476 /* memory for this card.. wavecache limited :(*/
480 /* hardware resources */
481 struct pci_dev
*pcidev
;
491 static void set_mixer(struct ess_card
*card
,unsigned int mixer
, unsigned int val
);
520 /* --------------------------------------------------------------------- */
522 static void check_suspend(struct ess_card
*card
);
524 /* --------------------------------------------------------------------- */
528 * ESS Maestro AC97 codec programming interface.
531 static void maestro_ac97_set(struct ess_card
*card
, u8 cmd
, u16 val
)
533 int io
= card
->iobase
;
536 * Wait for the codec bus to be free
543 if(!(inb(io
+ESS_AC97_INDEX
)&1))
549 outw(val
, io
+ESS_AC97_DATA
);
551 outb(cmd
, io
+ESS_AC97_INDEX
);
555 static u16
maestro_ac97_get(struct ess_card
*card
, u8 cmd
)
557 int io
= card
->iobase
;
564 * Wait for the codec bus to be free
569 if(!(inb(io
+ESS_AC97_INDEX
)&1))
573 outb(cmd
|0x80, io
+ESS_AC97_INDEX
);
576 while(inb(io
+ESS_AC97_INDEX
)&1)
581 printk(KERN_ERR
"maestro: ac97 codec timeout reading 0x%x.\n",cmd
);
585 data
=inw(io
+ESS_AC97_DATA
);
590 /* OSS interface to the ac97s.. */
592 #define AC97_STEREO_MASK (SOUND_MASK_VOLUME|\
593 SOUND_MASK_PCM|SOUND_MASK_LINE|SOUND_MASK_CD|\
594 SOUND_MASK_VIDEO|SOUND_MASK_LINE1|SOUND_MASK_IGAIN)
596 #define AC97_SUPPORTED_MASK (AC97_STEREO_MASK | \
597 SOUND_MASK_BASS|SOUND_MASK_TREBLE|SOUND_MASK_MIC|\
600 #define AC97_RECORD_MASK (SOUND_MASK_MIC|\
601 SOUND_MASK_CD| SOUND_MASK_VIDEO| SOUND_MASK_LINE1| SOUND_MASK_LINE|\
604 #define supported_mixer(CARD,FOO) ( CARD->mix.supported_mixers & (1<<FOO) )
606 /* this table has default mixer values for all OSS mixers.
607 be sure to fill it in if you add oss mixers
608 to anyone's supported mixer defines */
610 static unsigned int mixer_defaults
[SOUND_MIXER_NRDEVICES
] = {
611 [SOUND_MIXER_VOLUME
] = 0x3232,
612 [SOUND_MIXER_BASS
] = 0x3232,
613 [SOUND_MIXER_TREBLE
] = 0x3232,
614 [SOUND_MIXER_SPEAKER
] = 0x3232,
615 [SOUND_MIXER_MIC
] = 0x8000, /* annoying */
616 [SOUND_MIXER_LINE
] = 0x3232,
617 [SOUND_MIXER_CD
] = 0x3232,
618 [SOUND_MIXER_VIDEO
] = 0x3232,
619 [SOUND_MIXER_LINE1
] = 0x3232,
620 [SOUND_MIXER_PCM
] = 0x3232,
621 [SOUND_MIXER_IGAIN
] = 0x3232
624 static struct ac97_mixer_hw
{
625 unsigned char offset
;
627 } ac97_hw
[SOUND_MIXER_NRDEVICES
]= {
628 [SOUND_MIXER_VOLUME
] = {0x02,63},
629 [SOUND_MIXER_BASS
] = {0x08,15},
630 [SOUND_MIXER_TREBLE
] = {0x08,15},
631 [SOUND_MIXER_SPEAKER
] = {0x0a,15},
632 [SOUND_MIXER_MIC
] = {0x0e,31},
633 [SOUND_MIXER_LINE
] = {0x10,31},
634 [SOUND_MIXER_CD
] = {0x12,31},
635 [SOUND_MIXER_VIDEO
] = {0x14,31},
636 [SOUND_MIXER_LINE1
] = {0x16,31},
637 [SOUND_MIXER_PCM
] = {0x18,31},
638 [SOUND_MIXER_IGAIN
] = {0x1c,15}
641 #if 0 /* *shrug* removed simply because we never used it.
642 feel free to implement again if needed */
644 /* reads the given OSS mixer from the ac97
645 the caller must have insured that the ac97 knows
646 about that given mixer, and should be holding a
647 spinlock for the card */
648 static int ac97_read_mixer(struct ess_card
*card
, int mixer
)
652 struct ac97_mixer_hw
*mh
= &ac97_hw
[mixer
];
654 val
= maestro_ac97_get(card
, mh
->offset
);
656 if(AC97_STEREO_MASK
& (1<<mixer
)) {
657 /* nice stereo mixers .. */
660 left
= (val
>> 8) & 0x7f;
663 if (mixer
== SOUND_MIXER_IGAIN
) {
664 right
= (right
* 100) / mh
->scale
;
665 left
= (left
* 100) / mh
->scale
;
667 right
= 100 - ((right
* 100) / mh
->scale
);
668 left
= 100 - ((left
* 100) / mh
->scale
);
671 ret
= left
| (right
<< 8);
672 } else if (mixer
== SOUND_MIXER_SPEAKER
) {
673 ret
= 100 - ((((val
& 0x1e)>>1) * 100) / mh
->scale
);
674 } else if (mixer
== SOUND_MIXER_MIC
) {
675 ret
= 100 - (((val
& 0x1f) * 100) / mh
->scale
);
676 /* the low bit is optional in the tone sliders and masking
677 it lets is avoid the 0xf 'bypass'.. */
678 } else if (mixer
== SOUND_MIXER_BASS
) {
679 ret
= 100 - ((((val
>> 8) & 0xe) * 100) / mh
->scale
);
680 } else if (mixer
== SOUND_MIXER_TREBLE
) {
681 ret
= 100 - (((val
& 0xe) * 100) / mh
->scale
);
684 M_printk("read mixer %d (0x%x) %x -> %x\n",mixer
,mh
->offset
,val
,ret
);
690 /* write the OSS encoded volume to the given OSS encoded mixer,
691 again caller's job to make sure all is well in arg land,
692 call with spinlock held */
694 /* linear scale -> log */
695 static unsigned char lin2log
[101] =
697 0, 0 , 15 , 23 , 30 , 34 , 38 , 42 , 45 , 47 ,
698 50 , 52 , 53 , 55 , 57 , 58 , 60 , 61 , 62 ,
699 63 , 65 , 66 , 67 , 68 , 69 , 69 , 70 , 71 ,
700 72 , 73 , 73 , 74 , 75 , 75 , 76 , 77 , 77 ,
701 78 , 78 , 79 , 80 , 80 , 81 , 81 , 82 , 82 ,
702 83 , 83 , 84 , 84 , 84 , 85 , 85 , 86 , 86 ,
703 87 , 87 , 87 , 88 , 88 , 88 , 89 , 89 , 89 ,
704 90 , 90 , 90 , 91 , 91 , 91 , 92 , 92 , 92 ,
705 93 , 93 , 93 , 94 , 94 , 94 , 94 , 95 , 95 ,
706 95 , 95 , 96 , 96 , 96 , 96 , 97 , 97 , 97 ,
707 97 , 98 , 98 , 98 , 98 , 99 , 99 , 99 , 99 , 99
710 static void ac97_write_mixer(struct ess_card
*card
,int mixer
, unsigned int left
, unsigned int right
)
713 struct ac97_mixer_hw
*mh
= &ac97_hw
[mixer
];
715 M_printk("wrote mixer %d (0x%x) %d,%d",mixer
,mh
->offset
,left
,right
);
717 if(AC97_STEREO_MASK
& (1<<mixer
)) {
718 /* stereo mixers, mute them if we can */
720 if (mixer
== SOUND_MIXER_IGAIN
) {
721 /* igain's slider is reversed.. */
722 right
= (right
* mh
->scale
) / 100;
723 left
= (left
* mh
->scale
) / 100;
724 if ((left
== 0) && (right
== 0))
726 } else if (mixer
== SOUND_MIXER_PCM
|| mixer
== SOUND_MIXER_CD
) {
727 /* log conversion seems bad for them */
728 if ((left
== 0) && (right
== 0))
730 right
= ((100 - right
) * mh
->scale
) / 100;
731 left
= ((100 - left
) * mh
->scale
) / 100;
733 /* log conversion for the stereo controls */
734 if((left
== 0) && (right
== 0))
736 right
= ((100 - lin2log
[right
]) * mh
->scale
) / 100;
737 left
= ((100 - lin2log
[left
]) * mh
->scale
) / 100;
740 val
|= (left
<< 8) | right
;
742 } else if (mixer
== SOUND_MIXER_SPEAKER
) {
743 val
= (((100 - left
) * mh
->scale
) / 100) << 1;
744 } else if (mixer
== SOUND_MIXER_MIC
) {
745 val
= maestro_ac97_get(card
, mh
->offset
) & ~0x801f;
746 val
|= (((100 - left
) * mh
->scale
) / 100);
747 /* the low bit is optional in the tone sliders and masking
748 it lets is avoid the 0xf 'bypass'.. */
749 } else if (mixer
== SOUND_MIXER_BASS
) {
750 val
= maestro_ac97_get(card
, mh
->offset
) & ~0x0f00;
751 val
|= ((((100 - left
) * mh
->scale
) / 100) << 8) & 0x0e00;
752 } else if (mixer
== SOUND_MIXER_TREBLE
) {
753 val
= maestro_ac97_get(card
, mh
->offset
) & ~0x000f;
754 val
|= (((100 - left
) * mh
->scale
) / 100) & 0x000e;
757 maestro_ac97_set(card
, mh
->offset
, val
);
759 M_printk(" -> %x\n",val
);
762 /* the following tables allow us to go from
763 OSS <-> ac97 quickly. */
765 enum ac97_recsettings
{
771 AC97_REC_STEREO
, /* combination of all enabled outputs.. */
772 AC97_REC_MONO
, /*.. or the mono equivalent */
776 static unsigned int ac97_oss_mask
[] = {
777 [AC97_REC_MIC
] = SOUND_MASK_MIC
,
778 [AC97_REC_CD
] = SOUND_MASK_CD
,
779 [AC97_REC_VIDEO
] = SOUND_MASK_VIDEO
,
780 [AC97_REC_AUX
] = SOUND_MASK_LINE1
,
781 [AC97_REC_LINE
] = SOUND_MASK_LINE
,
782 [AC97_REC_PHONE
] = SOUND_MASK_PHONEIN
785 /* indexed by bit position */
786 static unsigned int ac97_oss_rm
[] = {
787 [SOUND_MIXER_MIC
] = AC97_REC_MIC
,
788 [SOUND_MIXER_CD
] = AC97_REC_CD
,
789 [SOUND_MIXER_VIDEO
] = AC97_REC_VIDEO
,
790 [SOUND_MIXER_LINE1
] = AC97_REC_AUX
,
791 [SOUND_MIXER_LINE
] = AC97_REC_LINE
,
792 [SOUND_MIXER_PHONEIN
] = AC97_REC_PHONE
795 /* read or write the recmask
796 the ac97 can really have left and right recording
797 inputs independently set, but OSS doesn't seem to
798 want us to express that to the user.
799 the caller guarantees that we have a supported bit set,
800 and they must be holding the card's spinlock */
802 ac97_recmask_io(struct ess_card
*card
, int read
, int mask
)
804 unsigned int val
= ac97_oss_mask
[ maestro_ac97_get(card
, 0x1a) & 0x7 ];
806 if (read
) return val
;
808 /* oss can have many inputs, maestro can't. try
809 to pick the 'new' one */
811 if (mask
!= val
) mask
&= ~val
;
814 val
= ac97_oss_rm
[val
];
815 val
|= val
<< 8; /* set both channels */
817 M_printk("maestro: setting ac97 recmask to 0x%x\n",val
);
819 maestro_ac97_set(card
,0x1a,val
);
825 * The Maestro can be wired to a standard AC97 compliant codec
826 * (see www.intel.com for the pdf's on this), or to a PT101 codec
827 * which appears to be the ES1918 (data sheet on the esstech.com.tw site)
829 * The PT101 setup is untested.
832 static u16 __init
maestro_ac97_init(struct ess_card
*card
)
834 u16 vend1
, vend2
, caps
;
836 card
->mix
.supported_mixers
= AC97_SUPPORTED_MASK
;
837 card
->mix
.stereo_mixers
= AC97_STEREO_MASK
;
838 card
->mix
.record_sources
= AC97_RECORD_MASK
;
839 /* card->mix.read_mixer = ac97_read_mixer;*/
840 card
->mix
.write_mixer
= ac97_write_mixer
;
841 card
->mix
.recmask_io
= ac97_recmask_io
;
843 vend1
= maestro_ac97_get(card
, 0x7c);
844 vend2
= maestro_ac97_get(card
, 0x7e);
846 caps
= maestro_ac97_get(card
, 0x00);
848 printk(KERN_INFO
"maestro: AC97 Codec detected: v: 0x%2x%2x caps: 0x%x pwr: 0x%x\n",
849 vend1
,vend2
,caps
,maestro_ac97_get(card
,0x26) & 0xf);
851 if (! (caps
& 0x4) ) {
852 /* no bass/treble nobs */
853 card
->mix
.supported_mixers
&= ~(SOUND_MASK_BASS
|SOUND_MASK_TREBLE
);
856 /* XXX endianness, dork head. */
857 /* vendor specifc bits.. */
858 switch ((long)(vend1
<< 16) | vend2
) {
859 case 0x545200ff: /* TriTech */
860 /* no idea what this does */
861 maestro_ac97_set(card
,0x2a,0x0001);
862 maestro_ac97_set(card
,0x2c,0x0000);
863 maestro_ac97_set(card
,0x2c,0xffff);
865 #if 0 /* i thought the problems I was seeing were with
866 the 1921, but apparently they were with the pci board
867 it was on, so this code is commented out.
868 lets see if this holds true. */
869 case 0x83847609: /* ESS 1921 */
870 /* writing to 0xe (mic) or 0x1a (recmask) seems
871 to hang this codec */
872 card
->mix
.supported_mixers
&= ~(SOUND_MASK_MIC
);
873 card
->mix
.record_sources
= 0;
874 card
->mix
.recmask_io
= NULL
;
875 #if 0 /* don't ask. I have yet to see what these actually do. */
876 maestro_ac97_set(card
,0x76,0xABBA); /* o/~ Take a chance on me o/~ */
878 maestro_ac97_set(card
,0x78,0x3002);
880 maestro_ac97_set(card
,0x78,0x3802);
888 maestro_ac97_set(card
, 0x1E, 0x0404);
889 /* null misc stuff */
890 maestro_ac97_set(card
, 0x20, 0x0000);
895 #if 0 /* there has been 1 person on the planet with a pt101 that we
896 know of. If they care, they can put this back in :) */
897 static u16
maestro_pt101_init(struct ess_card
*card
,int iobase
)
899 printk(KERN_INFO
"maestro: PT101 Codec detected, initializing but _not_ installing mixer device.\n");
901 maestro_ac97_set(iobase
, 0x2A, 0x0001);
902 maestro_ac97_set(iobase
, 0x2C, 0x0000);
903 maestro_ac97_set(iobase
, 0x2C, 0xFFFF);
904 maestro_ac97_set(iobase
, 0x10, 0x9F1F);
905 maestro_ac97_set(iobase
, 0x12, 0x0808);
906 maestro_ac97_set(iobase
, 0x14, 0x9F1F);
907 maestro_ac97_set(iobase
, 0x16, 0x9F1F);
908 maestro_ac97_set(iobase
, 0x18, 0x0404);
909 maestro_ac97_set(iobase
, 0x1A, 0x0000);
910 maestro_ac97_set(iobase
, 0x1C, 0x0000);
911 maestro_ac97_set(iobase
, 0x02, 0x0404);
912 maestro_ac97_set(iobase
, 0x04, 0x0808);
913 maestro_ac97_set(iobase
, 0x0C, 0x801F);
914 maestro_ac97_set(iobase
, 0x0E, 0x801F);
919 /* this is very magic, and very slow.. */
921 maestro_ac97_reset(int ioaddr
, struct pci_dev
*pcidev
)
927 outw( inw(ioaddr
+ 0x38) & 0xfffc, ioaddr
+ 0x38);
928 outw( inw(ioaddr
+ 0x3a) & 0xfffc, ioaddr
+ 0x3a);
929 outw( inw(ioaddr
+ 0x3c) & 0xfffc, ioaddr
+ 0x3c);
931 /* reset the first codec */
932 outw(0x0000, ioaddr
+0x36);
933 save_68
= inw(ioaddr
+0x68);
934 pci_read_config_word(pcidev
, 0x58, &w
); /* something magical with gpio and bus arb. */
935 pci_read_config_dword(pcidev
, PCI_SUBSYSTEM_VENDOR_ID
, &vend
);
938 outw(0xfffe, ioaddr
+ 0x64); /* tickly gpio 0.. */
939 outw(0x0001, ioaddr
+ 0x68);
940 outw(0x0000, ioaddr
+ 0x60);
942 outw(0x0001, ioaddr
+ 0x60);
945 outw(save_68
| 0x1, ioaddr
+ 0x68); /* now restore .. */
946 outw( (inw(ioaddr
+ 0x38) & 0xfffc)|0x1, ioaddr
+ 0x38);
947 outw( (inw(ioaddr
+ 0x3a) & 0xfffc)|0x1, ioaddr
+ 0x3a);
948 outw( (inw(ioaddr
+ 0x3c) & 0xfffc)|0x1, ioaddr
+ 0x3c);
950 /* now the second codec */
951 outw(0x0000, ioaddr
+0x36);
952 outw(0xfff7, ioaddr
+ 0x64);
953 save_68
= inw(ioaddr
+0x68);
954 outw(0x0009, ioaddr
+ 0x68);
955 outw(0x0001, ioaddr
+ 0x60);
957 outw(0x0009, ioaddr
+ 0x60);
958 mdelay(500); /* .. ouch.. */
959 outw( inw(ioaddr
+ 0x38) & 0xfffc, ioaddr
+ 0x38);
960 outw( inw(ioaddr
+ 0x3a) & 0xfffc, ioaddr
+ 0x3a);
961 outw( inw(ioaddr
+ 0x3c) & 0xfffc, ioaddr
+ 0x3c);
963 #if 0 /* the loop here needs to be much better if we want it.. */
964 M_printk("trying software reset\n");
965 /* try and do a software reset */
966 outb(0x80|0x7c, ioaddr
+ 0x30);
968 if ((inw(ioaddr
+ 0x30) & 1) == 0) {
969 if(inb(ioaddr
+ 0x32) !=0) break;
971 outb(0x80|0x7d, ioaddr
+ 0x30);
972 if (((inw(ioaddr
+ 0x30) & 1) == 0) && (inb(ioaddr
+ 0x32) !=0)) break;
973 outb(0x80|0x7f, ioaddr
+ 0x30);
974 if (((inw(ioaddr
+ 0x30) & 1) == 0) && (inb(ioaddr
+ 0x32) !=0)) break;
978 outb( inb(ioaddr
+ 0x37) | 0x08, ioaddr
+ 0x37); /* do a software reset */
979 mdelay(500); /* oh my.. */
980 outb( inb(ioaddr
+ 0x37) & ~0x08, ioaddr
+ 0x37);
982 outw( 0x80, ioaddr
+0x30);
983 for(w
= 0 ; w
< 10000; w
++) {
984 if((inw(ioaddr
+ 0x30) & 1) ==0) break;
989 if ( vend
== NEC_VERSA_SUBID1
|| vend
== NEC_VERSA_SUBID2
) {
990 /* turn on external amp? */
991 outw(0xf9ff, ioaddr
+ 0x64);
992 outw(inw(ioaddr
+0x68) | 0x600, ioaddr
+ 0x68);
993 outw(0x0209, ioaddr
+ 0x60);
996 /* Turn on the 978 docking chip.
997 First frob the "master output enable" bit,
998 then set most of the playback volume control registers to max. */
999 outb(inb(ioaddr
+0xc0)|(1<<5), ioaddr
+0xc0);
1000 outb(0xff, ioaddr
+0xc3);
1001 outb(0xff, ioaddr
+0xc4);
1002 outb(0xff, ioaddr
+0xc6);
1003 outb(0xff, ioaddr
+0xc8);
1004 outb(0x3f, ioaddr
+0xcf);
1005 outb(0x3f, ioaddr
+0xd0);
1008 * Indirect register access. Not all registers are readable so we
1009 * need to keep register state ourselves
1012 #define WRITEABLE_MAP 0xEFFFFF
1013 #define READABLE_MAP 0x64003F
1016 * The Maestro engineers were a little indirection happy. These indirected
1017 * registers themselves include indirect registers at another layer
1020 static void __maestro_write(struct ess_card
*card
, u16 reg
, u16 data
)
1022 long ioaddr
= card
->iobase
;
1024 outw(reg
, ioaddr
+0x02);
1025 outw(data
, ioaddr
+0x00);
1026 if( reg
>= NR_IDRS
) printk("maestro: IDR %d out of bounds!\n",reg
);
1027 else card
->maestro_map
[reg
]=data
;
1031 static void maestro_write(struct ess_state
*s
, u16 reg
, u16 data
)
1033 unsigned long flags
;
1035 check_suspend(s
->card
);
1036 spin_lock_irqsave(&s
->card
->lock
,flags
);
1038 __maestro_write(s
->card
,reg
,data
);
1040 spin_unlock_irqrestore(&s
->card
->lock
,flags
);
1043 static u16
__maestro_read(struct ess_card
*card
, u16 reg
)
1045 long ioaddr
= card
->iobase
;
1047 outw(reg
, ioaddr
+0x02);
1048 return card
->maestro_map
[reg
]=inw(ioaddr
+0x00);
1051 static u16
maestro_read(struct ess_state
*s
, u16 reg
)
1053 if(READABLE_MAP
& (1<<reg
))
1055 unsigned long flags
;
1056 check_suspend(s
->card
);
1057 spin_lock_irqsave(&s
->card
->lock
,flags
);
1059 __maestro_read(s
->card
,reg
);
1061 spin_unlock_irqrestore(&s
->card
->lock
,flags
);
1063 return s
->card
->maestro_map
[reg
];
1067 * These routines handle accessing the second level indirections to the
1072 * The register names are the ones ESS uses (see 104T31.ZIP)
1075 #define IDR0_DATA_PORT 0x00
1076 #define IDR1_CRAM_POINTER 0x01
1077 #define IDR2_CRAM_DATA 0x02
1078 #define IDR3_WAVE_DATA 0x03
1079 #define IDR4_WAVE_PTR_LOW 0x04
1080 #define IDR5_WAVE_PTR_HI 0x05
1081 #define IDR6_TIMER_CTRL 0x06
1082 #define IDR7_WAVE_ROMRAM 0x07
1084 static void apu_index_set(struct ess_card
*card
, u16 index
)
1087 __maestro_write(card
, IDR1_CRAM_POINTER
, index
);
1089 if(__maestro_read(card
, IDR1_CRAM_POINTER
)==index
)
1091 printk(KERN_WARNING
"maestro: APU register select failed.\n");
1094 static void apu_data_set(struct ess_card
*card
, u16 data
)
1099 if(__maestro_read(card
, IDR0_DATA_PORT
)==data
)
1101 __maestro_write(card
, IDR0_DATA_PORT
, data
);
1106 * This is the public interface for APU manipulation. It handles the
1107 * interlock to avoid two APU writes in parallel etc. Don't diddle
1108 * directly with the stuff above.
1111 static void apu_set_register(struct ess_state
*s
, u16 channel
, u8 reg
, u16 data
)
1113 unsigned long flags
;
1115 check_suspend(s
->card
);
1117 if(channel
&ESS_CHAN_HARD
)
1118 channel
&=~ESS_CHAN_HARD
;
1122 printk("BAD CHANNEL %d.\n",channel
);
1124 channel
= s
->apu
[channel
];
1125 /* store based on real hardware apu/reg */
1126 s
->card
->apu_map
[channel
][reg
]=data
;
1130 /* hooray for double indirection!! */
1131 spin_lock_irqsave(&s
->card
->lock
,flags
);
1133 apu_index_set(s
->card
, reg
);
1134 apu_data_set(s
->card
, data
);
1136 spin_unlock_irqrestore(&s
->card
->lock
,flags
);
1139 static u16
apu_get_register(struct ess_state
*s
, u16 channel
, u8 reg
)
1141 unsigned long flags
;
1144 check_suspend(s
->card
);
1146 if(channel
&ESS_CHAN_HARD
)
1147 channel
&=~ESS_CHAN_HARD
;
1149 channel
= s
->apu
[channel
];
1153 spin_lock_irqsave(&s
->card
->lock
,flags
);
1155 apu_index_set(s
->card
, reg
);
1156 v
=__maestro_read(s
->card
, IDR0_DATA_PORT
);
1158 spin_unlock_irqrestore(&s
->card
->lock
,flags
);
1164 * The wavecache buffers between the APUs and
1168 static void wave_set_register(struct ess_state
*s
, u16 reg
, u16 value
)
1170 long ioaddr
= s
->card
->iobase
;
1171 unsigned long flags
;
1172 check_suspend(s
->card
);
1174 spin_lock_irqsave(&s
->card
->lock
,flags
);
1176 outw(reg
, ioaddr
+0x10);
1177 outw(value
, ioaddr
+0x12);
1179 spin_unlock_irqrestore(&s
->card
->lock
,flags
);
1182 static u16
wave_get_register(struct ess_state
*s
, u16 reg
)
1184 long ioaddr
= s
->card
->iobase
;
1185 unsigned long flags
;
1187 check_suspend(s
->card
);
1189 spin_lock_irqsave(&s
->card
->lock
,flags
);
1190 outw(reg
, ioaddr
+0x10);
1191 value
=inw(ioaddr
+0x12);
1192 spin_unlock_irqrestore(&s
->card
->lock
,flags
);
1197 static void sound_reset(int ioaddr
)
1199 outw(0x2000, 0x18+ioaddr
);
1201 outw(0x0000, 0x18+ioaddr
);
1205 /* sets the play formats of these apus, should be passed the already shifted format */
1206 static void set_apu_fmt(struct ess_state
*s
, int apu
, int mode
)
1210 if(!(mode
&ESS_FMT_16BIT
)) apu_fmt
+=0x20;
1211 if((mode
&ESS_FMT_STEREO
)) apu_fmt
+=0x10;
1212 s
->apu_mode
[apu
] = apu_fmt
;
1213 s
->apu_mode
[apu
+1] = apu_fmt
;
1216 /* this only fixes the output apu mode to be later set by start_dac and
1217 company. output apu modes are set in ess_rec_setup */
1218 static void set_fmt(struct ess_state
*s
, unsigned char mask
, unsigned char data
)
1220 s
->fmt
= (s
->fmt
& mask
) | data
;
1221 set_apu_fmt(s
, 0, (s
->fmt
>> ESS_DAC_SHIFT
) & ESS_FMT_MASK
);
1224 /* this is off by a little bit.. */
1225 static u32
compute_rate(struct ess_state
*s
, u32 freq
)
1227 u32 clock
= clock_freq
[s
->card
->card_type
];
1229 freq
= (freq
* clocking
)/48000;
1234 return ((freq
/ clock
) <<16 )+
1235 (((freq
% clock
) << 16) / clock
);
1238 static void set_dac_rate(struct ess_state
*s
, unsigned int rate
)
1241 int fmt
= (s
->fmt
>> ESS_DAC_SHIFT
) & ESS_FMT_MASK
;
1250 if(! (fmt
& ESS_FMT_16BIT
) && !(fmt
& ESS_FMT_STEREO
))
1253 /* M_printk("computing dac rate %d with mode %d\n",rate,s->fmt);*/
1255 freq
= compute_rate(s
, rate
);
1257 /* Load the frequency, turn on 6dB */
1258 apu_set_register(s
, 0, 2,(apu_get_register(s
, 0, 2)&0x00FF)|
1259 ( ((freq
&0xFF)<<8)|0x10 ));
1260 apu_set_register(s
, 0, 3, freq
>>8);
1261 apu_set_register(s
, 1, 2,(apu_get_register(s
, 1, 2)&0x00FF)|
1262 ( ((freq
&0xFF)<<8)|0x10 ));
1263 apu_set_register(s
, 1, 3, freq
>>8);
1266 static void set_adc_rate(struct ess_state
*s
, unsigned rate
)
1270 /* Sample Rate conversion APUs don't like 0x10000 for their rate */
1278 freq
= compute_rate(s
, rate
);
1280 /* Load the frequency, turn on 6dB */
1281 apu_set_register(s
, 2, 2,(apu_get_register(s
, 2, 2)&0x00FF)|
1282 ( ((freq
&0xFF)<<8)|0x10 ));
1283 apu_set_register(s
, 2, 3, freq
>>8);
1284 apu_set_register(s
, 3, 2,(apu_get_register(s
, 3, 2)&0x00FF)|
1285 ( ((freq
&0xFF)<<8)|0x10 ));
1286 apu_set_register(s
, 3, 3, freq
>>8);
1288 /* fix mixer rate at 48khz. and its _must_ be 0x10000. */
1291 apu_set_register(s
, 4, 2,(apu_get_register(s
, 4, 2)&0x00FF)|
1292 ( ((freq
&0xFF)<<8)|0x10 ));
1293 apu_set_register(s
, 4, 3, freq
>>8);
1294 apu_set_register(s
, 5, 2,(apu_get_register(s
, 5, 2)&0x00FF)|
1295 ( ((freq
&0xFF)<<8)|0x10 ));
1296 apu_set_register(s
, 5, 3, freq
>>8);
1299 /* Stop our host of recording apus */
1300 static inline void stop_adc(struct ess_state
*s
)
1302 /* XXX lets hope we don't have to lock around this */
1303 if (! (s
->enable
& ADC_RUNNING
)) return;
1305 s
->enable
&= ~ADC_RUNNING
;
1306 apu_set_register(s
, 2, 0, apu_get_register(s
, 2, 0)&0xFF0F);
1307 apu_set_register(s
, 3, 0, apu_get_register(s
, 3, 0)&0xFF0F);
1308 apu_set_register(s
, 4, 0, apu_get_register(s
, 2, 0)&0xFF0F);
1309 apu_set_register(s
, 5, 0, apu_get_register(s
, 3, 0)&0xFF0F);
1312 /* stop output apus */
1313 static void stop_dac(struct ess_state
*s
)
1315 /* XXX have to lock around this? */
1316 if (! (s
->enable
& DAC_RUNNING
)) return;
1318 s
->enable
&= ~DAC_RUNNING
;
1319 apu_set_register(s
, 0, 0, apu_get_register(s
, 0, 0)&0xFF0F);
1320 apu_set_register(s
, 1, 0, apu_get_register(s
, 1, 0)&0xFF0F);
1323 static void start_dac(struct ess_state
*s
)
1326 if ( (s
->dma_dac
.mapped
|| s
->dma_dac
.count
> 0) &&
1328 (! (s
->enable
& DAC_RUNNING
)) ) {
1330 s
->enable
|= DAC_RUNNING
;
1332 apu_set_register(s
, 0, 0,
1333 (apu_get_register(s
, 0, 0)&0xFF0F)|s
->apu_mode
[0]);
1335 if((s
->fmt
>> ESS_DAC_SHIFT
) & ESS_FMT_STEREO
)
1336 apu_set_register(s
, 1, 0,
1337 (apu_get_register(s
, 1, 0)&0xFF0F)|s
->apu_mode
[1]);
1341 static void start_adc(struct ess_state
*s
)
1344 if ((s
->dma_adc
.mapped
|| s
->dma_adc
.count
< (signed)(s
->dma_adc
.dmasize
- 2*s
->dma_adc
.fragsize
))
1345 && s
->dma_adc
.ready
&& (! (s
->enable
& ADC_RUNNING
)) ) {
1347 s
->enable
|= ADC_RUNNING
;
1348 apu_set_register(s
, 2, 0,
1349 (apu_get_register(s
, 2, 0)&0xFF0F)|s
->apu_mode
[2]);
1350 apu_set_register(s
, 4, 0,
1351 (apu_get_register(s
, 4, 0)&0xFF0F)|s
->apu_mode
[4]);
1353 if( s
->fmt
& (ESS_FMT_STEREO
<< ESS_ADC_SHIFT
)) {
1354 apu_set_register(s
, 3, 0,
1355 (apu_get_register(s
, 3, 0)&0xFF0F)|s
->apu_mode
[3]);
1356 apu_set_register(s
, 5, 0,
1357 (apu_get_register(s
, 5, 0)&0xFF0F)|s
->apu_mode
[5]);
1365 * Native play back driver
1368 /* the mode passed should be already shifted and masked */
1370 ess_play_setup(struct ess_state
*ess
, int mode
, u32 rate
, void *buffer
, int size
)
1377 M_printk("mode=%d rate=%d buf=%p len=%d.\n",
1378 mode
, rate
, buffer
, size
);
1380 /* all maestro sizes are in 16bit words */
1383 if(mode
&ESS_FMT_STEREO
) {
1385 /* only 16/stereo gets size divided */
1386 if(mode
&ESS_FMT_16BIT
)
1390 for(channel
=0; channel
<= high_apu
; channel
++)
1392 pa
= virt_to_bus(buffer
);
1394 /* set the wavecache control reg */
1395 tmpval
= (pa
- 0x10) & 0xFFF8;
1396 if(!(mode
& ESS_FMT_16BIT
)) tmpval
|= 4;
1397 if(mode
& ESS_FMT_STEREO
) tmpval
|= 2;
1398 ess
->apu_base
[channel
]=tmpval
;
1399 wave_set_register(ess
, ess
->apu
[channel
]<<3, tmpval
);
1401 pa
-= virt_to_bus(ess
->card
->dmapages
);
1404 /* base offset of dma calcs when reading the pointer
1406 if(!channel
) ess
->dma_dac
.base
= pa
&0xFFFF;
1408 pa
|=0x00400000; /* System RAM */
1410 /* XXX the 16bit here might not be needed.. */
1411 if((mode
& ESS_FMT_STEREO
) && (mode
& ESS_FMT_16BIT
)) {
1413 pa
|=0x00800000; /* Stereo */
1417 /* XXX think about endianess when writing these registers */
1418 M_printk("maestro: ess_play_setup: APU[%d] pa = 0x%x\n", ess
->apu
[channel
], pa
);
1419 /* start of sample */
1420 apu_set_register(ess
, channel
, 4, ((pa
>>16)&0xFF)<<8);
1421 apu_set_register(ess
, channel
, 5, pa
&0xFFFF);
1423 apu_set_register(ess
, channel
, 6, (pa
+size
)&0xFFFF);
1424 /* setting loop len == sample len */
1425 apu_set_register(ess
, channel
, 7, size
);
1427 /* clear effects/env.. */
1428 apu_set_register(ess
, channel
, 8, 0x0000);
1429 /* set amp now to 0xd0 (?), low byte is 'amplitude dest'? */
1430 apu_set_register(ess
, channel
, 9, 0xD000);
1432 /* clear routing stuff */
1433 apu_set_register(ess
, channel
, 11, 0x0000);
1434 /* dma on, no envelopes, filter to all 1s) */
1435 apu_set_register(ess
, channel
, 0, 0x400F);
1437 if(mode
&ESS_FMT_16BIT
)
1438 ess
->apu_mode
[channel
]=0x10;
1440 ess
->apu_mode
[channel
]=0x30;
1442 if(mode
&ESS_FMT_STEREO
) {
1443 /* set panning: left or right */
1444 apu_set_register(ess
, channel
, 10, 0x8F00 | (channel
? 0 : 0x10));
1445 ess
->apu_mode
[channel
] += 0x10;
1447 apu_set_register(ess
, channel
, 10, 0x8F08);
1450 /* clear WP interrupts */
1451 outw(1, ess
->card
->iobase
+0x04);
1452 /* enable WP ints */
1453 outw(inw(ess
->card
->iobase
+0x18)|4, ess
->card
->iobase
+0x18);
1456 set_dac_rate(ess
,rate
);
1461 * Native record driver
1464 /* again, passed mode is alrady shifted/masked */
1466 ess_rec_setup(struct ess_state
*ess
, int mode
, u32 rate
, void *buffer
, int size
)
1471 M_printk("maestro: ess_rec_setup: mode=%d rate=%d buf=0x%p len=%d.\n",
1472 mode
, rate
, buffer
, size
);
1474 /* all maestro sizes are in 16bit words */
1477 /* we're given the full size of the buffer, but
1478 in stereo each channel will only use its half */
1479 if(mode
&ESS_FMT_STEREO
) {
1484 /* APU assignments: 2 = mono/left SRC
1486 4 = mono/left Input Mixer
1487 5 = right Input Mixer */
1488 for(channel
=2;channel
<6;channel
+=apu_step
)
1495 /* data seems to flow from the codec, through an apu into
1496 the 'mixbuf' bit of page, then through the SRC apu
1497 and out to the real 'buffer'. ok. sure. */
1499 if(channel
& 0x04) {
1500 /* ok, we're an input mixer going from adc
1501 through the mixbuf to the other apus */
1503 if(!(channel
& 0x01)) {
1504 pa
= virt_to_bus(ess
->mixbuf
);
1506 pa
= virt_to_bus(ess
->mixbuf
+ (PAGE_SIZE
>> 4));
1509 /* we source from a 'magic' apu */
1510 bsize
= PAGE_SIZE
>> 5; /* half of this channels alloc, in words */
1511 route
= 0x14 + (channel
- 4); /* parallel in crap, see maestro reg 0xC [8-11] */
1512 ess
->apu_mode
[channel
] = 0x90; /* Input Mixer */
1515 /* we're a rate converter taking
1516 input from the input apus and outputing it to
1518 if(!(channel
& 0x01)) {
1519 pa
= virt_to_bus(buffer
);
1521 /* right channel records its split half.
1522 *2 accommodates for rampant shifting earlier */
1523 pa
= virt_to_bus(buffer
+ size
*2);
1526 ess
->apu_mode
[channel
] = 0xB0; /* Sample Rate Converter */
1529 /* get input from inputing apu */
1530 route
= channel
+ 2;
1533 M_printk("maestro: ess_rec_setup: getting pa 0x%x from %d\n",pa
,channel
);
1535 /* set the wavecache control reg */
1536 tmpval
= (pa
- 0x10) & 0xFFF8;
1537 ess
->apu_base
[channel
]=tmpval
;
1538 wave_set_register(ess
, ess
->apu
[channel
]<<3, tmpval
);
1540 pa
-= virt_to_bus(ess
->card
->dmapages
);
1543 /* base offset of dma calcs when reading the pointer
1545 if(channel
==2) ess
->dma_adc
.base
= pa
&0xFFFF;
1547 pa
|=0x00400000; /* bit 22 -> System RAM */
1549 M_printk("maestro: ess_rec_setup: APU[%d] pa = 0x%x size = 0x%x route = 0x%x\n",
1550 ess
->apu
[channel
], pa
, bsize
, route
);
1552 /* Begin loading the APU */
1553 for(i
=0;i
<15;i
++) /* clear all PBRs */
1554 apu_set_register(ess
, channel
, i
, 0x0000);
1556 apu_set_register(ess
, channel
, 0, 0x400F);
1558 /* need to enable subgroups.. and we should probably
1559 have different groups for different /dev/dsps.. */
1560 apu_set_register(ess
, channel
, 2, 0x8);
1562 /* Load the buffer into the wave engine */
1563 apu_set_register(ess
, channel
, 4, ((pa
>>16)&0xFF)<<8);
1564 /* XXX reg is little endian.. */
1565 apu_set_register(ess
, channel
, 5, pa
&0xFFFF);
1566 apu_set_register(ess
, channel
, 6, (pa
+bsize
)&0xFFFF);
1567 apu_set_register(ess
, channel
, 7, bsize
);
1569 /* clear effects/env.. */
1570 apu_set_register(ess
, channel
, 8, 0x00F0);
1572 /* amplitude now? sure. why not. */
1573 apu_set_register(ess
, channel
, 9, 0x0000);
1575 /* set filter tune, radius, polar pan */
1576 apu_set_register(ess
, channel
, 10, 0x8F08);
1579 apu_set_register(ess
, channel
, 11, route
);
1582 /* clear WP interrupts */
1583 outw(1, ess
->card
->iobase
+0x04);
1584 /* enable WP ints */
1585 outw(inw(ess
->card
->iobase
+0x18)|4, ess
->card
->iobase
+0x18);
1588 set_adc_rate(ess
,rate
);
1591 /* --------------------------------------------------------------------- */
1593 static void set_dmaa(struct ess_state
*s
, unsigned int addr
, unsigned int count
)
1595 M_printk("set_dmaa??\n");
1598 static void set_dmac(struct ess_state
*s
, unsigned int addr
, unsigned int count
)
1600 M_printk("set_dmac??\n");
1603 /* Playback pointer */
1604 static inline unsigned get_dmaa(struct ess_state
*s
)
1608 offset
= apu_get_register(s
,0,5);
1610 /* M_printk("dmaa: offset: %d, base: %d\n",offset,s->dma_dac.base); */
1612 offset
-=s
->dma_dac
.base
;
1614 return (offset
&0xFFFE)<<1; /* hardware is in words */
1617 /* Record pointer */
1618 static inline unsigned get_dmac(struct ess_state
*s
)
1622 offset
= apu_get_register(s
,2,5);
1624 /* M_printk("dmac: offset: %d, base: %d\n",offset,s->dma_adc.base); */
1626 /* The offset is an address not a position relative to base */
1627 offset
-=s
->dma_adc
.base
;
1629 return (offset
&0xFFFE)<<1; /* hardware is in words */
1633 * Meet Bob, the timer...
1636 static irqreturn_t
ess_interrupt(int irq
, void *dev_id
, struct pt_regs
*regs
);
1638 static void stop_bob(struct ess_state
*s
)
1640 /* Mask IDR 11,17 */
1641 maestro_write(s
, 0x11, maestro_read(s
, 0x11)&~1);
1642 maestro_write(s
, 0x17, maestro_read(s
, 0x17)&~1);
1645 /* eventually we could be clever and limit bob ints
1646 to the frequency at which our smallest duration
1647 chunks may expire */
1648 #define ESS_SYSCLK 50000000
1649 static void start_bob(struct ess_state
*s
)
1654 /* XXX make freq selector much smarter, see calc_bob_rate */
1657 /* compute ideal interrupt frequency for buffer size & play rate */
1658 /* first, find best prescaler value to match freq */
1659 for(prescale
=5;prescale
<12;prescale
++)
1660 if(freq
> (ESS_SYSCLK
>>(prescale
+9)))
1663 /* next, back off prescaler whilst getting divider into optimum range */
1665 while((prescale
> 5) && (divide
<32))
1672 /* now fine-tune the divider for best match */
1673 for(;divide
<31;divide
++)
1674 if(freq
>= ((ESS_SYSCLK
>>(prescale
+9))/(divide
+1)))
1677 /* divide = 0 is illegal, but don't let prescale = 4! */
1685 maestro_write(s
, 6, 0x9000 | (prescale
<<5) | divide
); /* set reg */
1687 /* Now set IDR 11/17 */
1688 maestro_write(s
, 0x11, maestro_read(s
, 0x11)|1);
1689 maestro_write(s
, 0x17, maestro_read(s
, 0x17)|1);
1691 /* --------------------------------------------------------------------- */
1693 /* this quickly calculates the frequency needed for bob
1694 and sets it if its different than what bob is
1695 currently running at. its called often so
1696 needs to be fairly quick. */
1699 static void calc_bob_rate(struct ess_state
*s
) {
1700 #if 0 /* this thing tries to set the frequency of bob such that
1701 there are 2 interrupts / buffer walked by the dac/adc. That
1702 is probably very wrong for people who actually care about
1703 mid buffer positioning. it should be calculated as bytes/interrupt
1704 and that needs to be decided :) so for now just use the static 150
1707 unsigned int dac_rate
=2,adc_rate
=1,newrate
;
1708 static int israte
=-1;
1710 if (s
->dma_dac
.fragsize
== 0) dac_rate
= BOB_MIN
;
1712 dac_rate
= (2 * s
->ratedac
* sample_size
[(s
->fmt
>> ESS_DAC_SHIFT
) & ESS_FMT_MASK
]) /
1713 (s
->dma_dac
.fragsize
) ;
1716 if (s
->dma_adc
.fragsize
== 0) adc_rate
= BOB_MIN
;
1718 adc_rate
= (2 * s
->rateadc
* sample_size
[(s
->fmt
>> ESS_DAC_SHIFT
) & ESS_FMT_MASK
]) /
1719 (s
->dma_adc
.fragsize
) ;
1722 if(dac_rate
> adc_rate
) newrate
= adc_rate
;
1723 else newrate
=dac_rate
;
1725 if(newrate
> BOB_MAX
) newrate
= BOB_MAX
;
1727 if(newrate
< BOB_MIN
)
1731 if( israte
!= newrate
) {
1732 printk("dac: %d adc: %d rate: %d\n",dac_rate
,adc_rate
,israte
);
1740 prog_dmabuf(struct ess_state
*s
, unsigned rec
)
1742 struct dmabuf
*db
= rec
? &s
->dma_adc
: &s
->dma_dac
;
1743 unsigned rate
= rec
? s
->rateadc
: s
->ratedac
;
1744 unsigned bytepersec
;
1747 unsigned long flags
;
1749 spin_lock_irqsave(&s
->lock
, flags
);
1753 fmt
>>= ESS_ADC_SHIFT
;
1756 fmt
>>= ESS_DAC_SHIFT
;
1758 spin_unlock_irqrestore(&s
->lock
, flags
);
1759 fmt
&= ESS_FMT_MASK
;
1761 db
->hwptr
= db
->swptr
= db
->total_bytes
= db
->count
= db
->error
= db
->endcleared
= 0;
1763 /* this algorithm is a little nuts.. where did /1000 come from? */
1764 bytepersec
= rate
<< sample_shift
[fmt
];
1765 bufs
= PAGE_SIZE
<< db
->buforder
;
1766 if (db
->ossfragshift
) {
1767 if ((1000 << db
->ossfragshift
) < bytepersec
)
1768 db
->fragshift
= ld2(bytepersec
/1000);
1770 db
->fragshift
= db
->ossfragshift
;
1772 db
->fragshift
= ld2(bytepersec
/100/(db
->subdivision
? db
->subdivision
: 1));
1773 if (db
->fragshift
< 3)
1776 db
->numfrag
= bufs
>> db
->fragshift
;
1777 while (db
->numfrag
< 4 && db
->fragshift
> 3) {
1779 db
->numfrag
= bufs
>> db
->fragshift
;
1781 db
->fragsize
= 1 << db
->fragshift
;
1782 if (db
->ossmaxfrags
>= 4 && db
->ossmaxfrags
< db
->numfrag
)
1783 db
->numfrag
= db
->ossmaxfrags
;
1784 db
->fragsamples
= db
->fragsize
>> sample_shift
[fmt
];
1785 db
->dmasize
= db
->numfrag
<< db
->fragshift
;
1787 M_printk("maestro: setup oss: numfrag: %d fragsize: %d dmasize: %d\n",db
->numfrag
,db
->fragsize
,db
->dmasize
);
1789 memset(db
->rawbuf
, (fmt
& ESS_FMT_16BIT
) ? 0 : 0x80, db
->dmasize
);
1791 spin_lock_irqsave(&s
->lock
, flags
);
1793 ess_rec_setup(s
, fmt
, s
->rateadc
, db
->rawbuf
, db
->dmasize
);
1795 ess_play_setup(s
, fmt
, s
->ratedac
, db
->rawbuf
, db
->dmasize
);
1797 spin_unlock_irqrestore(&s
->lock
, flags
);
1803 static __inline__
void
1804 clear_advance(struct ess_state
*s
)
1806 unsigned char c
= ((s
->fmt
>> ESS_DAC_SHIFT
) & ESS_FMT_16BIT
) ? 0 : 0x80;
1808 unsigned char *buf
= s
->dma_dac
.rawbuf
;
1809 unsigned bsize
= s
->dma_dac
.dmasize
;
1810 unsigned bptr
= s
->dma_dac
.swptr
;
1811 unsigned len
= s
->dma_dac
.fragsize
;
1813 if (bptr
+ len
> bsize
) {
1814 unsigned x
= bsize
- bptr
;
1815 memset(buf
+ bptr
, c
, x
);
1816 /* account for wrapping? */
1820 memset(buf
+ bptr
, c
, len
);
1823 /* call with spinlock held! */
1825 ess_update_ptr(struct ess_state
*s
)
1830 /* update ADC pointer */
1831 if (s
->dma_adc
.ready
) {
1832 /* oh boy should this all be re-written. everything in the current code paths think
1833 that the various counters/pointers are expressed in bytes to the user but we have
1834 two apus doing stereo stuff so we fix it up here.. it propagates to all the various
1835 counters from here. */
1836 if ( s
->fmt
& (ESS_FMT_STEREO
<< ESS_ADC_SHIFT
)) {
1837 hwptr
= (get_dmac(s
)*2) % s
->dma_adc
.dmasize
;
1839 hwptr
= get_dmac(s
) % s
->dma_adc
.dmasize
;
1841 diff
= (s
->dma_adc
.dmasize
+ hwptr
- s
->dma_adc
.hwptr
) % s
->dma_adc
.dmasize
;
1842 s
->dma_adc
.hwptr
= hwptr
;
1843 s
->dma_adc
.total_bytes
+= diff
;
1844 s
->dma_adc
.count
+= diff
;
1845 if (s
->dma_adc
.count
>= (signed)s
->dma_adc
.fragsize
)
1846 wake_up(&s
->dma_adc
.wait
);
1847 if (!s
->dma_adc
.mapped
) {
1848 if (s
->dma_adc
.count
> (signed)(s
->dma_adc
.dmasize
- ((3 * s
->dma_adc
.fragsize
) >> 1))) {
1850 wrindir(s, SV_CIENABLE, s->enable); */
1852 /* brute force everyone back in sync, sigh */
1853 s
->dma_adc
.count
= 0;
1854 s
->dma_adc
.swptr
= 0;
1855 s
->dma_adc
.hwptr
= 0;
1860 /* update DAC pointer */
1861 if (s
->dma_dac
.ready
) {
1862 hwptr
= get_dmaa(s
) % s
->dma_dac
.dmasize
;
1863 /* the apu only reports the length it has seen, not the
1864 length of the memory that has been used (the WP
1866 if ( ((s
->fmt
>> ESS_DAC_SHIFT
) & ESS_FMT_MASK
) == (ESS_FMT_STEREO
|ESS_FMT_16BIT
))
1869 diff
= (s
->dma_dac
.dmasize
+ hwptr
- s
->dma_dac
.hwptr
) % s
->dma_dac
.dmasize
;
1870 /* M_printk("updating dac: hwptr: %d diff: %d\n",hwptr,diff);*/
1871 s
->dma_dac
.hwptr
= hwptr
;
1872 s
->dma_dac
.total_bytes
+= diff
;
1873 if (s
->dma_dac
.mapped
) {
1874 s
->dma_dac
.count
+= diff
;
1875 if (s
->dma_dac
.count
>= (signed)s
->dma_dac
.fragsize
) {
1876 wake_up(&s
->dma_dac
.wait
);
1879 s
->dma_dac
.count
-= diff
;
1880 /* M_printk("maestro: ess_update_ptr: diff: %d, count: %d\n", diff, s->dma_dac.count); */
1881 if (s
->dma_dac
.count
<= 0) {
1882 M_printk("underflow! diff: %d count: %d hw: %d sw: %d\n", diff
, s
->dma_dac
.count
,
1883 hwptr
, s
->dma_dac
.swptr
);
1885 wrindir(s, SV_CIENABLE, s->enable); */
1886 /* XXX how on earth can calling this with the lock held work.. */
1888 /* brute force everyone back in sync, sigh */
1889 s
->dma_dac
.count
= 0;
1890 s
->dma_dac
.swptr
= hwptr
;
1892 } else if (s
->dma_dac
.count
<= (signed)s
->dma_dac
.fragsize
&& !s
->dma_dac
.endcleared
) {
1894 s
->dma_dac
.endcleared
= 1;
1896 if (s
->dma_dac
.count
+ (signed)s
->dma_dac
.fragsize
<= (signed)s
->dma_dac
.dmasize
) {
1897 wake_up(&s
->dma_dac
.wait
);
1898 /* printk("waking up DAC count: %d sw: %d hw: %d\n",s->dma_dac.count, s->dma_dac.swptr,
1906 ess_interrupt(int irq
, void *dev_id
, struct pt_regs
*regs
)
1908 struct ess_state
*s
;
1909 struct ess_card
*c
= (struct ess_card
*)dev_id
;
1913 if ( ! (event
= inb(c
->iobase
+0x1A)) )
1916 outw(inw(c
->iobase
+4)&1, c
->iobase
+4);
1918 /* M_printk("maestro int: %x\n",event);*/
1922 enum {UP_EVT
, DOWN_EVT
, MUTE_EVT
} vol_evt
;
1925 /* Figure out which volume control button was pushed,
1926 based on differences from the default register
1928 x
= inb(c
->iobase
+0x1c);
1929 if (x
&1) vol_evt
= MUTE_EVT
;
1930 else if (((x
>>1)&7) > 4) vol_evt
= UP_EVT
;
1931 else vol_evt
= DOWN_EVT
;
1933 /* Reset the volume control registers. */
1934 outb(0x88, c
->iobase
+0x1c);
1935 outb(0x88, c
->iobase
+0x1d);
1936 outb(0x88, c
->iobase
+0x1e);
1937 outb(0x88, c
->iobase
+0x1f);
1939 /* Deal with the button press in a hammer-handed
1940 manner by adjusting the master mixer volume. */
1941 volume
= c
->mix
.mixer_state
[0] & 0xff;
1942 if (vol_evt
== UP_EVT
) {
1947 else if (vol_evt
== DOWN_EVT
) {
1952 /* vol_evt == MUTE_EVT */
1954 volume
= c
->dock_mute_vol
;
1956 c
->dock_mute_vol
= volume
;
1960 set_mixer (c
, 0, (volume
<< 8) | volume
);
1963 /* Ack all the interrupts. */
1964 outb(0xFF, c
->iobase
+0x1A);
1967 * Update the pointers for all APU's we are running.
1969 for(i
=0;i
<NR_DSPS
;i
++)
1972 if(s
->dev_audio
== -1)
1974 spin_lock(&s
->lock
);
1976 spin_unlock(&s
->lock
);
1982 /* --------------------------------------------------------------------- */
1984 static const char invalid_magic
[] = KERN_CRIT
"maestro: invalid magic value in %s\n";
1986 #define VALIDATE_MAGIC(FOO,MAG) \
1988 if (!(FOO) || (FOO)->magic != MAG) { \
1989 printk(invalid_magic,__FUNCTION__); \
1994 #define VALIDATE_STATE(a) VALIDATE_MAGIC(a,ESS_STATE_MAGIC)
1995 #define VALIDATE_CARD(a) VALIDATE_MAGIC(a,ESS_CARD_MAGIC)
1997 static void set_mixer(struct ess_card
*card
,unsigned int mixer
, unsigned int val
)
1999 unsigned int left
,right
;
2000 /* cleanse input a little */
2001 right
= ((val
>> 8) & 0xff) ;
2002 left
= (val
& 0xff) ;
2004 if(right
> 100) right
= 100;
2005 if(left
> 100) left
= 100;
2007 card
->mix
.mixer_state
[mixer
]=(right
<< 8) | left
;
2008 card
->mix
.write_mixer(card
,mixer
,left
,right
);
2012 mixer_push_state(struct ess_card
*card
)
2015 for(i
= 0 ; i
< SOUND_MIXER_NRDEVICES
; i
++) {
2016 if( ! supported_mixer(card
,i
)) continue;
2018 set_mixer(card
,i
,card
->mix
.mixer_state
[i
]);
2022 static int mixer_ioctl(struct ess_card
*card
, unsigned int cmd
, unsigned long arg
)
2025 unsigned long flags
;
2026 void __user
*argp
= (void __user
*)arg
;
2027 int __user
*p
= argp
;
2029 VALIDATE_CARD(card
);
2030 if (cmd
== SOUND_MIXER_INFO
) {
2032 memset(&info
, 0, sizeof(info
));
2033 strlcpy(info
.id
, card_names
[card
->card_type
], sizeof(info
.id
));
2034 strlcpy(info
.name
, card_names
[card
->card_type
], sizeof(info
.name
));
2035 info
.modify_counter
= card
->mix
.modcnt
;
2036 if (copy_to_user(argp
, &info
, sizeof(info
)))
2040 if (cmd
== SOUND_OLD_MIXER_INFO
) {
2041 _old_mixer_info info
;
2042 memset(&info
, 0, sizeof(info
));
2043 strlcpy(info
.id
, card_names
[card
->card_type
], sizeof(info
.id
));
2044 strlcpy(info
.name
, card_names
[card
->card_type
], sizeof(info
.name
));
2045 if (copy_to_user(argp
, &info
, sizeof(info
)))
2049 if (cmd
== OSS_GETVERSION
)
2050 return put_user(SOUND_VERSION
, p
);
2052 if (_IOC_TYPE(cmd
) != 'M' || _IOC_SIZE(cmd
) != sizeof(int))
2055 if (_IOC_DIR(cmd
) == _IOC_READ
) {
2056 switch (_IOC_NR(cmd
)) {
2057 case SOUND_MIXER_RECSRC
: /* give them the current record source */
2059 if(!card
->mix
.recmask_io
) {
2062 spin_lock_irqsave(&card
->lock
, flags
);
2063 val
= card
->mix
.recmask_io(card
,1,0);
2064 spin_unlock_irqrestore(&card
->lock
, flags
);
2068 case SOUND_MIXER_DEVMASK
: /* give them the supported mixers */
2069 val
= card
->mix
.supported_mixers
;
2072 case SOUND_MIXER_RECMASK
: /* Arg contains a bit for each supported recording source */
2073 val
= card
->mix
.record_sources
;
2076 case SOUND_MIXER_STEREODEVS
: /* Mixer channels supporting stereo */
2077 val
= card
->mix
.stereo_mixers
;
2080 case SOUND_MIXER_CAPS
:
2081 val
= SOUND_CAP_EXCL_INPUT
;
2084 default: /* read a specific mixer */
2087 if ( ! supported_mixer(card
,i
))
2090 /* do we ever want to touch the hardware? */
2091 /* spin_lock_irqsave(&card->lock, flags);
2092 val = card->mix.read_mixer(card,i);
2093 spin_unlock_irqrestore(&card->lock, flags);*/
2095 val
= card
->mix
.mixer_state
[i
];
2096 /* M_printk("returned 0x%x for mixer %d\n",val,i);*/
2100 return put_user(val
, p
);
2103 if (_IOC_DIR(cmd
) != (_IOC_WRITE
|_IOC_READ
))
2108 if (get_user(val
, p
))
2111 switch (_IOC_NR(cmd
)) {
2112 case SOUND_MIXER_RECSRC
: /* Arg contains a bit for each recording source */
2114 if (!card
->mix
.recmask_io
) return -EINVAL
;
2116 if(! (val
&= card
->mix
.record_sources
)) return -EINVAL
;
2118 spin_lock_irqsave(&card
->lock
, flags
);
2119 card
->mix
.recmask_io(card
,0,val
);
2120 spin_unlock_irqrestore(&card
->lock
, flags
);
2126 if ( ! supported_mixer(card
,i
))
2129 spin_lock_irqsave(&card
->lock
, flags
);
2130 set_mixer(card
,i
,val
);
2131 spin_unlock_irqrestore(&card
->lock
, flags
);
2137 /* --------------------------------------------------------------------- */
2138 static int ess_open_mixdev(struct inode
*inode
, struct file
*file
)
2140 unsigned int minor
= iminor(inode
);
2141 struct ess_card
*card
= NULL
;
2142 struct pci_dev
*pdev
= NULL
;
2143 struct pci_driver
*drvr
;
2145 while ((pdev
= pci_find_device(PCI_ANY_ID
, PCI_ANY_ID
, pdev
)) != NULL
) {
2146 drvr
= pci_dev_driver (pdev
);
2147 if (drvr
== &maestro_pci_driver
) {
2148 card
= (struct ess_card
*)pci_get_drvdata (pdev
);
2151 if (card
->dev_mixer
== minor
)
2157 file
->private_data
= card
;
2158 return nonseekable_open(inode
, file
);
2161 static int ess_release_mixdev(struct inode
*inode
, struct file
*file
)
2163 struct ess_card
*card
= (struct ess_card
*)file
->private_data
;
2165 VALIDATE_CARD(card
);
2170 static int ess_ioctl_mixdev(struct inode
*inode
, struct file
*file
, unsigned int cmd
, unsigned long arg
)
2172 struct ess_card
*card
= (struct ess_card
*)file
->private_data
;
2174 VALIDATE_CARD(card
);
2176 return mixer_ioctl(card
, cmd
, arg
);
2179 static /*const*/ struct file_operations ess_mixer_fops
= {
2180 .owner
= THIS_MODULE
,
2181 .llseek
= no_llseek
,
2182 .ioctl
= ess_ioctl_mixdev
,
2183 .open
= ess_open_mixdev
,
2184 .release
= ess_release_mixdev
,
2187 /* --------------------------------------------------------------------- */
2189 static int drain_dac(struct ess_state
*s
, int nonblock
)
2191 DECLARE_WAITQUEUE(wait
,current
);
2192 unsigned long flags
;
2196 if (s
->dma_dac
.mapped
|| !s
->dma_dac
.ready
)
2198 current
->state
= TASK_INTERRUPTIBLE
;
2199 add_wait_queue(&s
->dma_dac
.wait
, &wait
);
2201 /* XXX uhm.. questionable locking*/
2202 spin_lock_irqsave(&s
->lock
, flags
);
2203 count
= s
->dma_dac
.count
;
2204 spin_unlock_irqrestore(&s
->lock
, flags
);
2207 if (signal_pending(current
))
2210 remove_wait_queue(&s
->dma_dac
.wait
, &wait
);
2211 current
->state
= TASK_RUNNING
;
2214 tmo
= (count
* HZ
) / s
->ratedac
;
2215 tmo
>>= sample_shift
[(s
->fmt
>> ESS_DAC_SHIFT
) & ESS_FMT_MASK
];
2216 /* XXX this is just broken. someone is waking us up alot, or schedule_timeout is broken.
2217 or something. who cares. - zach */
2218 if (!schedule_timeout(tmo
? tmo
: 1) && tmo
)
2219 M_printk(KERN_DEBUG
"maestro: dma timed out?? %ld\n",jiffies
);
2221 remove_wait_queue(&s
->dma_dac
.wait
, &wait
);
2222 current
->state
= TASK_RUNNING
;
2223 if (signal_pending(current
))
2224 return -ERESTARTSYS
;
2228 /* --------------------------------------------------------------------- */
2229 /* Zach sez: "god this is gross.." */
2231 comb_stereo(unsigned char *real_buffer
,unsigned char *tmp_buffer
, int offset
,
2232 int count
, int bufsize
)
2234 /* No such thing as stereo recording, so we
2235 use dual input mixers. which means we have to
2236 combine mono to stereo buffer. yuck.
2238 but we don't have to be able to work a byte at a time..*/
2240 unsigned char *so
,*left
,*right
;
2244 left
= real_buffer
+ offset
;
2245 right
= real_buffer
+ bufsize
/2 + offset
;
2247 /* M_printk("comb_stereo writing %d to %p from %p and %p, offset: %d size: %d\n",count/2, tmp_buffer,left,right,offset,bufsize);*/
2249 for(i
=count
/4; i
; i
--) {
2250 (*(so
+2)) = *(right
++);
2251 (*(so
+3)) = *(right
++);
2253 (*(so
+1)) = *(left
++);
2260 /* in this loop, dma_adc.count signifies the amount of data thats waiting
2261 to be copied to the user's buffer. it is filled by the interrupt
2262 handler and drained by this loop. */
2264 ess_read(struct file
*file
, char __user
*buffer
, size_t count
, loff_t
*ppos
)
2266 struct ess_state
*s
= (struct ess_state
*)file
->private_data
;
2268 unsigned long flags
;
2271 unsigned char *combbuf
= NULL
;
2274 if (s
->dma_adc
.mapped
)
2276 if (!s
->dma_adc
.ready
&& (ret
= prog_dmabuf(s
, 1)))
2278 if (!access_ok(VERIFY_WRITE
, buffer
, count
))
2280 if(!(combbuf
= kmalloc(count
,GFP_KERNEL
)))
2287 spin_lock_irqsave(&s
->lock
, flags
);
2288 /* remember, all these things are expressed in bytes to be
2289 sent to the user.. hence the evil / 2 down below */
2290 swptr
= s
->dma_adc
.swptr
;
2291 cnt
= s
->dma_adc
.dmasize
-swptr
;
2292 if (s
->dma_adc
.count
< cnt
)
2293 cnt
= s
->dma_adc
.count
;
2294 spin_unlock_irqrestore(&s
->lock
, flags
);
2299 if ( cnt
> 0 ) cnt
&= ~3;
2303 if (file
->f_flags
& O_NONBLOCK
)
2305 ret
= ret
? ret
: -EAGAIN
;
2306 goto rec_return_free
;
2308 if (!interruptible_sleep_on_timeout(&s
->dma_adc
.wait
, HZ
)) {
2309 if(! s
->card
->in_suspend
) printk(KERN_DEBUG
"maestro: read: chip lockup? dmasz %u fragsz %u count %i hwptr %u swptr %u\n",
2310 s
->dma_adc
.dmasize
, s
->dma_adc
.fragsize
, s
->dma_adc
.count
,
2311 s
->dma_adc
.hwptr
, s
->dma_adc
.swptr
);
2313 spin_lock_irqsave(&s
->lock
, flags
);
2314 set_dmac(s
, virt_to_bus(s
->dma_adc
.rawbuf
), s
->dma_adc
.numfrag
<< s
->dma_adc
.fragshift
);
2315 /* program enhanced mode registers */
2317 /* wrindir(s, SV_CIDMACBASECOUNT1, (s->dma_adc.fragsamples-1) >> 8);
2318 wrindir(s, SV_CIDMACBASECOUNT0, s->dma_adc.fragsamples-1); */
2319 s
->dma_adc
.count
= s
->dma_adc
.hwptr
= s
->dma_adc
.swptr
= 0;
2320 spin_unlock_irqrestore(&s
->lock
, flags
);
2322 if (signal_pending(current
))
2324 ret
= ret
? ret
: -ERESTARTSYS
;
2325 goto rec_return_free
;
2330 if(s
->fmt
& (ESS_FMT_STEREO
<< ESS_ADC_SHIFT
)) {
2331 /* swptr/2 so that we know the real offset in each apu's buffer */
2332 comb_stereo(s
->dma_adc
.rawbuf
,combbuf
,swptr
/2,cnt
,s
->dma_adc
.dmasize
);
2333 if (copy_to_user(buffer
, combbuf
, cnt
)) {
2334 ret
= ret
? ret
: -EFAULT
;
2335 goto rec_return_free
;
2338 if (copy_to_user(buffer
, s
->dma_adc
.rawbuf
+ swptr
, cnt
)) {
2339 ret
= ret
? ret
: -EFAULT
;
2340 goto rec_return_free
;
2344 swptr
= (swptr
+ cnt
) % s
->dma_adc
.dmasize
;
2345 spin_lock_irqsave(&s
->lock
, flags
);
2346 s
->dma_adc
.swptr
= swptr
;
2347 s
->dma_adc
.count
-= cnt
;
2348 spin_unlock_irqrestore(&s
->lock
, flags
);
2361 ess_write(struct file
*file
, const char __user
*buffer
, size_t count
, loff_t
*ppos
)
2363 struct ess_state
*s
= (struct ess_state
*)file
->private_data
;
2365 unsigned long flags
;
2370 if (s
->dma_dac
.mapped
)
2372 if (!s
->dma_dac
.ready
&& (ret
= prog_dmabuf(s
, 0)))
2374 if (!access_ok(VERIFY_READ
, buffer
, count
))
2381 spin_lock_irqsave(&s
->lock
, flags
);
2383 if (s
->dma_dac
.count
< 0) {
2384 s
->dma_dac
.count
= 0;
2385 s
->dma_dac
.swptr
= s
->dma_dac
.hwptr
;
2387 swptr
= s
->dma_dac
.swptr
;
2389 cnt
= s
->dma_dac
.dmasize
-swptr
;
2391 if (s
->dma_dac
.count
+ cnt
> s
->dma_dac
.dmasize
)
2392 cnt
= s
->dma_dac
.dmasize
- s
->dma_dac
.count
;
2394 spin_unlock_irqrestore(&s
->lock
, flags
);
2401 if (file
->f_flags
& O_NONBLOCK
) {
2402 if(!ret
) ret
= -EAGAIN
;
2405 if (!interruptible_sleep_on_timeout(&s
->dma_dac
.wait
, HZ
)) {
2406 if(! s
->card
->in_suspend
) printk(KERN_DEBUG
"maestro: write: chip lockup? dmasz %u fragsz %u count %i hwptr %u swptr %u\n",
2407 s
->dma_dac
.dmasize
, s
->dma_dac
.fragsize
, s
->dma_dac
.count
,
2408 s
->dma_dac
.hwptr
, s
->dma_dac
.swptr
);
2410 spin_lock_irqsave(&s
->lock
, flags
);
2411 set_dmaa(s
, virt_to_bus(s
->dma_dac
.rawbuf
), s
->dma_dac
.numfrag
<< s
->dma_dac
.fragshift
);
2412 /* program enhanced mode registers */
2413 /* wrindir(s, SV_CIDMAABASECOUNT1, (s->dma_dac.fragsamples-1) >> 8);
2414 wrindir(s, SV_CIDMAABASECOUNT0, s->dma_dac.fragsamples-1); */
2416 s
->dma_dac
.count
= s
->dma_dac
.hwptr
= s
->dma_dac
.swptr
= 0;
2417 spin_unlock_irqrestore(&s
->lock
, flags
);
2419 if (signal_pending(current
)) {
2420 if (!ret
) ret
= -ERESTARTSYS
;
2425 if (copy_from_user(s
->dma_dac
.rawbuf
+ swptr
, buffer
, cnt
)) {
2426 if (!ret
) ret
= -EFAULT
;
2429 /* printk("wrote %d bytes at sw: %d cnt: %d while hw: %d\n",cnt, swptr, s->dma_dac.count, s->dma_dac.hwptr);*/
2431 swptr
= (swptr
+ cnt
) % s
->dma_dac
.dmasize
;
2433 spin_lock_irqsave(&s
->lock
, flags
);
2434 s
->dma_dac
.swptr
= swptr
;
2435 s
->dma_dac
.count
+= cnt
;
2436 s
->dma_dac
.endcleared
= 0;
2437 spin_unlock_irqrestore(&s
->lock
, flags
);
2447 /* No kernel lock - we have our own spinlock */
2448 static unsigned int ess_poll(struct file
*file
, struct poll_table_struct
*wait
)
2450 struct ess_state
*s
= (struct ess_state
*)file
->private_data
;
2451 unsigned long flags
;
2452 unsigned int mask
= 0;
2456 /* In 0.14 prog_dmabuf always returns success anyway ... */
2457 if (file
->f_mode
& FMODE_WRITE
) {
2458 if (!s
->dma_dac
.ready
&& prog_dmabuf(s
, 0))
2461 if (file
->f_mode
& FMODE_READ
) {
2462 if (!s
->dma_adc
.ready
&& prog_dmabuf(s
, 1))
2466 if (file
->f_mode
& FMODE_WRITE
)
2467 poll_wait(file
, &s
->dma_dac
.wait
, wait
);
2468 if (file
->f_mode
& FMODE_READ
)
2469 poll_wait(file
, &s
->dma_adc
.wait
, wait
);
2470 spin_lock_irqsave(&s
->lock
, flags
);
2472 if (file
->f_mode
& FMODE_READ
) {
2473 if (s
->dma_adc
.count
>= (signed)s
->dma_adc
.fragsize
)
2474 mask
|= POLLIN
| POLLRDNORM
;
2476 if (file
->f_mode
& FMODE_WRITE
) {
2477 if (s
->dma_dac
.mapped
) {
2478 if (s
->dma_dac
.count
>= (signed)s
->dma_dac
.fragsize
)
2479 mask
|= POLLOUT
| POLLWRNORM
;
2481 if ((signed)s
->dma_dac
.dmasize
>= s
->dma_dac
.count
+ (signed)s
->dma_dac
.fragsize
)
2482 mask
|= POLLOUT
| POLLWRNORM
;
2485 spin_unlock_irqrestore(&s
->lock
, flags
);
2489 static int ess_mmap(struct file
*file
, struct vm_area_struct
*vma
)
2491 struct ess_state
*s
= (struct ess_state
*)file
->private_data
;
2498 if (vma
->vm_flags
& VM_WRITE
) {
2499 if ((ret
= prog_dmabuf(s
, 1)) != 0)
2504 /* if we can have the wp/wc do the combining
2505 we can turn this back on. */
2506 if (vma
->vm_flags
& VM_READ
) {
2507 if ((ret
= prog_dmabuf(s
, 0)) != 0)
2514 if (vma
->vm_pgoff
!= 0)
2516 size
= vma
->vm_end
- vma
->vm_start
;
2517 if (size
> (PAGE_SIZE
<< db
->buforder
))
2520 if (remap_pfn_range(vma
, vma
->vm_start
,
2521 virt_to_phys(db
->rawbuf
) >> PAGE_SHIFT
,
2522 size
, vma
->vm_page_prot
))
2531 static int ess_ioctl(struct inode
*inode
, struct file
*file
, unsigned int cmd
, unsigned long arg
)
2533 struct ess_state
*s
= (struct ess_state
*)file
->private_data
;
2534 unsigned long flags
;
2535 audio_buf_info abinfo
;
2537 int val
, mapped
, ret
;
2538 unsigned char fmtm
, fmtd
;
2539 void __user
*argp
= (void __user
*)arg
;
2540 int __user
*p
= argp
;
2542 /* printk("maestro: ess_ioctl: cmd %d\n", cmd);*/
2545 mapped
= ((file
->f_mode
& FMODE_WRITE
) && s
->dma_dac
.mapped
) ||
2546 ((file
->f_mode
& FMODE_READ
) && s
->dma_adc
.mapped
);
2548 case OSS_GETVERSION
:
2549 return put_user(SOUND_VERSION
, p
);
2551 case SNDCTL_DSP_SYNC
:
2552 if (file
->f_mode
& FMODE_WRITE
)
2553 return drain_dac(s
, file
->f_flags
& O_NONBLOCK
);
2556 case SNDCTL_DSP_SETDUPLEX
:
2560 case SNDCTL_DSP_GETCAPS
:
2561 return put_user(DSP_CAP_DUPLEX
| DSP_CAP_REALTIME
| DSP_CAP_TRIGGER
| DSP_CAP_MMAP
, p
);
2563 case SNDCTL_DSP_RESET
:
2564 if (file
->f_mode
& FMODE_WRITE
) {
2566 synchronize_irq(s
->card
->pcidev
->irq
);
2567 s
->dma_dac
.swptr
= s
->dma_dac
.hwptr
= s
->dma_dac
.count
= s
->dma_dac
.total_bytes
= 0;
2569 if (file
->f_mode
& FMODE_READ
) {
2571 synchronize_irq(s
->card
->pcidev
->irq
);
2572 s
->dma_adc
.swptr
= s
->dma_adc
.hwptr
= s
->dma_adc
.count
= s
->dma_adc
.total_bytes
= 0;
2576 case SNDCTL_DSP_SPEED
:
2577 if (get_user(val
, p
))
2580 if (file
->f_mode
& FMODE_READ
) {
2582 s
->dma_adc
.ready
= 0;
2583 set_adc_rate(s
, val
);
2585 if (file
->f_mode
& FMODE_WRITE
) {
2587 s
->dma_dac
.ready
= 0;
2588 set_dac_rate(s
, val
);
2591 return put_user((file
->f_mode
& FMODE_READ
) ? s
->rateadc
: s
->ratedac
, p
);
2593 case SNDCTL_DSP_STEREO
:
2594 if (get_user(val
, p
))
2598 if (file
->f_mode
& FMODE_READ
) {
2600 s
->dma_adc
.ready
= 0;
2602 fmtd
|= ESS_FMT_STEREO
<< ESS_ADC_SHIFT
;
2604 fmtm
&= ~(ESS_FMT_STEREO
<< ESS_ADC_SHIFT
);
2606 if (file
->f_mode
& FMODE_WRITE
) {
2608 s
->dma_dac
.ready
= 0;
2610 fmtd
|= ESS_FMT_STEREO
<< ESS_DAC_SHIFT
;
2612 fmtm
&= ~(ESS_FMT_STEREO
<< ESS_DAC_SHIFT
);
2614 set_fmt(s
, fmtm
, fmtd
);
2617 case SNDCTL_DSP_CHANNELS
:
2618 if (get_user(val
, p
))
2623 if (file
->f_mode
& FMODE_READ
) {
2625 s
->dma_adc
.ready
= 0;
2627 fmtd
|= ESS_FMT_STEREO
<< ESS_ADC_SHIFT
;
2629 fmtm
&= ~(ESS_FMT_STEREO
<< ESS_ADC_SHIFT
);
2631 if (file
->f_mode
& FMODE_WRITE
) {
2633 s
->dma_dac
.ready
= 0;
2635 fmtd
|= ESS_FMT_STEREO
<< ESS_DAC_SHIFT
;
2637 fmtm
&= ~(ESS_FMT_STEREO
<< ESS_DAC_SHIFT
);
2639 set_fmt(s
, fmtm
, fmtd
);
2641 return put_user((s
->fmt
& ((file
->f_mode
& FMODE_READ
) ? (ESS_FMT_STEREO
<< ESS_ADC_SHIFT
)
2642 : (ESS_FMT_STEREO
<< ESS_DAC_SHIFT
))) ? 2 : 1, p
);
2644 case SNDCTL_DSP_GETFMTS
: /* Returns a mask */
2645 return put_user(AFMT_U8
|AFMT_S16_LE
, p
);
2647 case SNDCTL_DSP_SETFMT
: /* Selects ONE fmt*/
2648 if (get_user(val
, p
))
2650 if (val
!= AFMT_QUERY
) {
2653 if (file
->f_mode
& FMODE_READ
) {
2655 s
->dma_adc
.ready
= 0;
2656 /* fixed at 16bit for now */
2657 fmtd
|= ESS_FMT_16BIT
<< ESS_ADC_SHIFT
;
2659 if (val
== AFMT_S16_LE
)
2660 fmtd
|= ESS_FMT_16BIT
<< ESS_ADC_SHIFT
;
2662 fmtm
&= ~(ESS_FMT_16BIT
<< ESS_ADC_SHIFT
);
2665 if (file
->f_mode
& FMODE_WRITE
) {
2667 s
->dma_dac
.ready
= 0;
2668 if (val
== AFMT_S16_LE
)
2669 fmtd
|= ESS_FMT_16BIT
<< ESS_DAC_SHIFT
;
2671 fmtm
&= ~(ESS_FMT_16BIT
<< ESS_DAC_SHIFT
);
2673 set_fmt(s
, fmtm
, fmtd
);
2675 return put_user((s
->fmt
& ((file
->f_mode
& FMODE_READ
) ?
2676 (ESS_FMT_16BIT
<< ESS_ADC_SHIFT
)
2677 : (ESS_FMT_16BIT
<< ESS_DAC_SHIFT
))) ?
2682 case SNDCTL_DSP_POST
:
2685 case SNDCTL_DSP_GETTRIGGER
:
2687 if ((file
->f_mode
& FMODE_READ
) && (s
->enable
& ADC_RUNNING
))
2688 val
|= PCM_ENABLE_INPUT
;
2689 if ((file
->f_mode
& FMODE_WRITE
) && (s
->enable
& DAC_RUNNING
))
2690 val
|= PCM_ENABLE_OUTPUT
;
2691 return put_user(val
, p
);
2693 case SNDCTL_DSP_SETTRIGGER
:
2694 if (get_user(val
, p
))
2696 if (file
->f_mode
& FMODE_READ
) {
2697 if (val
& PCM_ENABLE_INPUT
) {
2698 if (!s
->dma_adc
.ready
&& (ret
= prog_dmabuf(s
, 1)))
2704 if (file
->f_mode
& FMODE_WRITE
) {
2705 if (val
& PCM_ENABLE_OUTPUT
) {
2706 if (!s
->dma_dac
.ready
&& (ret
= prog_dmabuf(s
, 0)))
2714 case SNDCTL_DSP_GETOSPACE
:
2715 if (!(file
->f_mode
& FMODE_WRITE
))
2717 if (!s
->dma_dac
.ready
&& (ret
= prog_dmabuf(s
, 0)))
2719 spin_lock_irqsave(&s
->lock
, flags
);
2721 abinfo
.fragsize
= s
->dma_dac
.fragsize
;
2722 abinfo
.bytes
= s
->dma_dac
.dmasize
- s
->dma_dac
.count
;
2723 abinfo
.fragstotal
= s
->dma_dac
.numfrag
;
2724 abinfo
.fragments
= abinfo
.bytes
>> s
->dma_dac
.fragshift
;
2725 spin_unlock_irqrestore(&s
->lock
, flags
);
2726 return copy_to_user(argp
, &abinfo
, sizeof(abinfo
)) ? -EFAULT
: 0;
2728 case SNDCTL_DSP_GETISPACE
:
2729 if (!(file
->f_mode
& FMODE_READ
))
2731 if (!s
->dma_adc
.ready
&& (ret
= prog_dmabuf(s
, 1)))
2733 spin_lock_irqsave(&s
->lock
, flags
);
2735 abinfo
.fragsize
= s
->dma_adc
.fragsize
;
2736 abinfo
.bytes
= s
->dma_adc
.count
;
2737 abinfo
.fragstotal
= s
->dma_adc
.numfrag
;
2738 abinfo
.fragments
= abinfo
.bytes
>> s
->dma_adc
.fragshift
;
2739 spin_unlock_irqrestore(&s
->lock
, flags
);
2740 return copy_to_user(argp
, &abinfo
, sizeof(abinfo
)) ? -EFAULT
: 0;
2742 case SNDCTL_DSP_NONBLOCK
:
2743 file
->f_flags
|= O_NONBLOCK
;
2746 case SNDCTL_DSP_GETODELAY
:
2747 if (!(file
->f_mode
& FMODE_WRITE
))
2749 if (!s
->dma_dac
.ready
&& (ret
= prog_dmabuf(s
, 0)))
2751 spin_lock_irqsave(&s
->lock
, flags
);
2753 val
= s
->dma_dac
.count
;
2754 spin_unlock_irqrestore(&s
->lock
, flags
);
2755 return put_user(val
, p
);
2757 case SNDCTL_DSP_GETIPTR
:
2758 if (!(file
->f_mode
& FMODE_READ
))
2760 if (!s
->dma_adc
.ready
&& (ret
= prog_dmabuf(s
, 1)))
2762 spin_lock_irqsave(&s
->lock
, flags
);
2764 cinfo
.bytes
= s
->dma_adc
.total_bytes
;
2765 cinfo
.blocks
= s
->dma_adc
.count
>> s
->dma_adc
.fragshift
;
2766 cinfo
.ptr
= s
->dma_adc
.hwptr
;
2767 if (s
->dma_adc
.mapped
)
2768 s
->dma_adc
.count
&= s
->dma_adc
.fragsize
-1;
2769 spin_unlock_irqrestore(&s
->lock
, flags
);
2770 if (copy_to_user(argp
, &cinfo
, sizeof(cinfo
)))
2774 case SNDCTL_DSP_GETOPTR
:
2775 if (!(file
->f_mode
& FMODE_WRITE
))
2777 if (!s
->dma_dac
.ready
&& (ret
= prog_dmabuf(s
, 0)))
2779 spin_lock_irqsave(&s
->lock
, flags
);
2781 cinfo
.bytes
= s
->dma_dac
.total_bytes
;
2782 cinfo
.blocks
= s
->dma_dac
.count
>> s
->dma_dac
.fragshift
;
2783 cinfo
.ptr
= s
->dma_dac
.hwptr
;
2784 if (s
->dma_dac
.mapped
)
2785 s
->dma_dac
.count
&= s
->dma_dac
.fragsize
-1;
2786 spin_unlock_irqrestore(&s
->lock
, flags
);
2787 if (copy_to_user(argp
, &cinfo
, sizeof(cinfo
)))
2791 case SNDCTL_DSP_GETBLKSIZE
:
2792 if (file
->f_mode
& FMODE_WRITE
) {
2793 if ((val
= prog_dmabuf(s
, 0)))
2795 return put_user(s
->dma_dac
.fragsize
, p
);
2797 if ((val
= prog_dmabuf(s
, 1)))
2799 return put_user(s
->dma_adc
.fragsize
, p
);
2801 case SNDCTL_DSP_SETFRAGMENT
:
2802 if (get_user(val
, p
))
2804 M_printk("maestro: SETFRAGMENT: %0x\n",val
);
2805 if (file
->f_mode
& FMODE_READ
) {
2806 s
->dma_adc
.ossfragshift
= val
& 0xffff;
2807 s
->dma_adc
.ossmaxfrags
= (val
>> 16) & 0xffff;
2808 if (s
->dma_adc
.ossfragshift
< 4)
2809 s
->dma_adc
.ossfragshift
= 4;
2810 if (s
->dma_adc
.ossfragshift
> 15)
2811 s
->dma_adc
.ossfragshift
= 15;
2812 if (s
->dma_adc
.ossmaxfrags
< 4)
2813 s
->dma_adc
.ossmaxfrags
= 4;
2815 if (file
->f_mode
& FMODE_WRITE
) {
2816 s
->dma_dac
.ossfragshift
= val
& 0xffff;
2817 s
->dma_dac
.ossmaxfrags
= (val
>> 16) & 0xffff;
2818 if (s
->dma_dac
.ossfragshift
< 4)
2819 s
->dma_dac
.ossfragshift
= 4;
2820 if (s
->dma_dac
.ossfragshift
> 15)
2821 s
->dma_dac
.ossfragshift
= 15;
2822 if (s
->dma_dac
.ossmaxfrags
< 4)
2823 s
->dma_dac
.ossmaxfrags
= 4;
2827 case SNDCTL_DSP_SUBDIVIDE
:
2828 if ((file
->f_mode
& FMODE_READ
&& s
->dma_adc
.subdivision
) ||
2829 (file
->f_mode
& FMODE_WRITE
&& s
->dma_dac
.subdivision
))
2831 if (get_user(val
, p
))
2833 if (val
!= 1 && val
!= 2 && val
!= 4)
2835 if (file
->f_mode
& FMODE_READ
)
2836 s
->dma_adc
.subdivision
= val
;
2837 if (file
->f_mode
& FMODE_WRITE
)
2838 s
->dma_dac
.subdivision
= val
;
2841 case SOUND_PCM_READ_RATE
:
2842 return put_user((file
->f_mode
& FMODE_READ
) ? s
->rateadc
: s
->ratedac
, p
);
2844 case SOUND_PCM_READ_CHANNELS
:
2845 return put_user((s
->fmt
& ((file
->f_mode
& FMODE_READ
) ? (ESS_FMT_STEREO
<< ESS_ADC_SHIFT
)
2846 : (ESS_FMT_STEREO
<< ESS_DAC_SHIFT
))) ? 2 : 1, p
);
2848 case SOUND_PCM_READ_BITS
:
2849 return put_user((s
->fmt
& ((file
->f_mode
& FMODE_READ
) ? (ESS_FMT_16BIT
<< ESS_ADC_SHIFT
)
2850 : (ESS_FMT_16BIT
<< ESS_DAC_SHIFT
))) ? 16 : 8, p
);
2852 case SOUND_PCM_WRITE_FILTER
:
2853 case SNDCTL_DSP_SETSYNCRO
:
2854 case SOUND_PCM_READ_FILTER
:
2862 set_base_registers(struct ess_state
*s
,void *vaddr
)
2864 unsigned long packed_phys
= virt_to_bus(vaddr
)>>12;
2865 wave_set_register(s
, 0x01FC , packed_phys
);
2866 wave_set_register(s
, 0x01FD , packed_phys
);
2867 wave_set_register(s
, 0x01FE , packed_phys
);
2868 wave_set_register(s
, 0x01FF , packed_phys
);
2872 * this guy makes sure we're in the right power
2873 * state for what we want to be doing
2875 static void maestro_power(struct ess_card
*card
, int tostate
)
2877 u16 active_mask
= acpi_state_mask
[tostate
];
2882 pci_read_config_byte(card
->pcidev
, card
->power_regs
+0x4, &state
);
2885 /* make sure we're in the right state */
2886 if(state
!= tostate
) {
2887 M_printk(KERN_WARNING
"maestro: dev %02x:%02x.%x switching from D%d to D%d\n",
2888 card
->pcidev
->bus
->number
,
2889 PCI_SLOT(card
->pcidev
->devfn
),
2890 PCI_FUNC(card
->pcidev
->devfn
),
2892 pci_write_config_byte(card
->pcidev
, card
->power_regs
+0x4, tostate
);
2895 /* and make sure the units we care about are on
2896 XXX we might want to do this before state flipping? */
2897 pci_write_config_word(card
->pcidev
, 0x54, ~ active_mask
);
2898 pci_write_config_word(card
->pcidev
, 0x56, ~ active_mask
);
2901 /* we allocate a large power of two for all our memory.
2902 this is cut up into (not to scale :):
2903 |silly fifo word | 512byte mixbuf per adc | dac/adc * channels |
2906 allocate_buffers(struct ess_state
*s
)
2910 struct page
*page
, *pend
;
2912 /* alloc as big a chunk as we can */
2913 for (order
= (dsps_order
+ (16-PAGE_SHIFT
) + 1); order
>= (dsps_order
+ 2 + 1); order
--)
2914 if((rawbuf
= (void *)__get_free_pages(GFP_KERNEL
|GFP_DMA
, order
)))
2920 M_printk("maestro: allocated %ld (%d) bytes at %p\n",PAGE_SIZE
<<order
,order
, rawbuf
);
2922 if ((virt_to_bus(rawbuf
) + (PAGE_SIZE
<< order
) - 1) & ~((1<<28)-1)) {
2923 printk(KERN_ERR
"maestro: DMA buffer beyond 256MB! busaddr 0x%lx size %ld\n",
2924 virt_to_bus(rawbuf
), PAGE_SIZE
<< order
);
2929 s
->card
->dmapages
= rawbuf
;
2930 s
->card
->dmaorder
= order
;
2932 for(i
=0;i
<NR_DSPS
;i
++) {
2933 struct ess_state
*ess
= &s
->card
->channels
[i
];
2935 if(ess
->dev_audio
== -1)
2938 ess
->dma_dac
.ready
= s
->dma_dac
.mapped
= 0;
2939 ess
->dma_adc
.ready
= s
->dma_adc
.mapped
= 0;
2940 ess
->dma_adc
.buforder
= ess
->dma_dac
.buforder
= order
- 1 - dsps_order
- 1;
2942 /* offset dac and adc buffers starting half way through and then at each [da][ad]c's
2943 order's intervals.. */
2944 ess
->dma_dac
.rawbuf
= rawbuf
+ (PAGE_SIZE
<<(order
-1)) + (i
* ( PAGE_SIZE
<< (ess
->dma_dac
.buforder
+ 1 )));
2945 ess
->dma_adc
.rawbuf
= ess
->dma_dac
.rawbuf
+ ( PAGE_SIZE
<< ess
->dma_dac
.buforder
);
2946 /* offset mixbuf by a mixbuf so that the lame status fifo can
2947 happily scribble away.. */
2948 ess
->mixbuf
= rawbuf
+ (512 * (i
+1));
2950 M_printk("maestro: setup apu %d: dac: %p adc: %p mix: %p\n",i
,ess
->dma_dac
.rawbuf
,
2951 ess
->dma_adc
.rawbuf
, ess
->mixbuf
);
2955 /* now mark the pages as reserved; otherwise remap_pfn_range doesn't do what we want */
2956 pend
= virt_to_page(rawbuf
+ (PAGE_SIZE
<< order
) - 1);
2957 for (page
= virt_to_page(rawbuf
); page
<= pend
; page
++)
2958 SetPageReserved(page
);
2963 free_buffers(struct ess_state
*s
)
2965 struct page
*page
, *pend
;
2967 s
->dma_dac
.rawbuf
= s
->dma_adc
.rawbuf
= NULL
;
2968 s
->dma_dac
.mapped
= s
->dma_adc
.mapped
= 0;
2969 s
->dma_dac
.ready
= s
->dma_adc
.ready
= 0;
2971 M_printk("maestro: freeing %p\n",s
->card
->dmapages
);
2972 /* undo marking the pages as reserved */
2974 pend
= virt_to_page(s
->card
->dmapages
+ (PAGE_SIZE
<< s
->card
->dmaorder
) - 1);
2975 for (page
= virt_to_page(s
->card
->dmapages
); page
<= pend
; page
++)
2976 ClearPageReserved(page
);
2978 free_pages((unsigned long)s
->card
->dmapages
,s
->card
->dmaorder
);
2979 s
->card
->dmapages
= NULL
;
2983 ess_open(struct inode
*inode
, struct file
*file
)
2985 unsigned int minor
= iminor(inode
);
2986 struct ess_state
*s
= NULL
;
2987 unsigned char fmtm
= ~0, fmts
= 0;
2988 struct pci_dev
*pdev
= NULL
;
2990 * Scan the cards and find the channel. We only
2991 * do this at open time so it is ok
2994 while ((pdev
= pci_find_device(PCI_ANY_ID
, PCI_ANY_ID
, pdev
)) != NULL
) {
2996 struct pci_driver
*drvr
;
2998 drvr
= pci_dev_driver (pdev
);
2999 if (drvr
== &maestro_pci_driver
) {
3001 struct ess_state
*sp
;
3003 c
= (struct ess_card
*)pci_get_drvdata (pdev
);
3006 for(i
=0;i
<NR_DSPS
;i
++)
3009 if(sp
->dev_audio
< 0)
3011 if((sp
->dev_audio
^ minor
) & ~0xf)
3021 file
->private_data
= s
;
3022 /* wait for device to become free */
3024 while (s
->open_mode
& file
->f_mode
) {
3025 if (file
->f_flags
& O_NONBLOCK
) {
3027 return -EWOULDBLOCK
;
3030 interruptible_sleep_on(&s
->open_wait
);
3031 if (signal_pending(current
))
3032 return -ERESTARTSYS
;
3036 /* under semaphore.. */
3037 if ((s
->card
->dmapages
==NULL
) && allocate_buffers(s
)) {
3042 /* we're covered by the open_sem */
3043 if( ! s
->card
->dsps_open
) {
3044 maestro_power(s
->card
,ACPI_D0
);
3047 s
->card
->dsps_open
++;
3048 M_printk("maestro: open, %d bobs now\n",s
->card
->dsps_open
);
3050 /* ok, lets write WC base regs now that we've
3051 powered up the chip */
3052 M_printk("maestro: writing 0x%lx (bus 0x%lx) to the wp\n",virt_to_bus(s
->card
->dmapages
),
3053 ((virt_to_bus(s
->card
->dmapages
))&0xFFE00000)>>12);
3054 set_base_registers(s
,s
->card
->dmapages
);
3056 if (file
->f_mode
& FMODE_READ
) {
3058 fmtm &= ~((ESS_FMT_STEREO | ESS_FMT_16BIT) << ESS_ADC_SHIFT);
3059 if ((minor & 0xf) == SND_DEV_DSP16)
3060 fmts |= ESS_FMT_16BIT << ESS_ADC_SHIFT; */
3062 fmtm
&= ~((ESS_FMT_STEREO
|ESS_FMT_16BIT
) << ESS_ADC_SHIFT
);
3063 fmts
= (ESS_FMT_STEREO
|ESS_FMT_16BIT
) << ESS_ADC_SHIFT
;
3065 s
->dma_adc
.ossfragshift
= s
->dma_adc
.ossmaxfrags
= s
->dma_adc
.subdivision
= 0;
3066 set_adc_rate(s
, 8000);
3068 if (file
->f_mode
& FMODE_WRITE
) {
3069 fmtm
&= ~((ESS_FMT_STEREO
| ESS_FMT_16BIT
) << ESS_DAC_SHIFT
);
3070 if ((minor
& 0xf) == SND_DEV_DSP16
)
3071 fmts
|= ESS_FMT_16BIT
<< ESS_DAC_SHIFT
;
3073 s
->dma_dac
.ossfragshift
= s
->dma_dac
.ossmaxfrags
= s
->dma_dac
.subdivision
= 0;
3074 set_dac_rate(s
, 8000);
3076 set_fmt(s
, fmtm
, fmts
);
3077 s
->open_mode
|= file
->f_mode
& (FMODE_READ
| FMODE_WRITE
);
3080 return nonseekable_open(inode
, file
);
3084 ess_release(struct inode
*inode
, struct file
*file
)
3086 struct ess_state
*s
= (struct ess_state
*)file
->private_data
;
3090 if (file
->f_mode
& FMODE_WRITE
)
3091 drain_dac(s
, file
->f_flags
& O_NONBLOCK
);
3093 if (file
->f_mode
& FMODE_WRITE
) {
3096 if (file
->f_mode
& FMODE_READ
) {
3100 s
->open_mode
&= (~file
->f_mode
) & (FMODE_READ
|FMODE_WRITE
);
3101 /* we're covered by the open_sem */
3102 M_printk("maestro: %d dsps now alive\n",s
->card
->dsps_open
-1);
3103 if( --s
->card
->dsps_open
<= 0) {
3104 s
->card
->dsps_open
= 0;
3107 maestro_power(s
->card
,ACPI_D2
);
3110 wake_up(&s
->open_wait
);
3115 static struct file_operations ess_audio_fops
= {
3116 .owner
= THIS_MODULE
,
3117 .llseek
= no_llseek
,
3124 .release
= ess_release
,
3128 maestro_config(struct ess_card
*card
)
3130 struct pci_dev
*pcidev
= card
->pcidev
;
3131 struct ess_state
*ess
= &card
->channels
[0];
3132 int apu
,iobase
= card
->iobase
;
3136 /* We used to muck around with pci config space that
3137 * we had no business messing with. We don't know enough
3138 * about the machine to know which DMA mode is appropriate,
3139 * etc. We were guessing wrong on some machines and making
3140 * them unhappy. We now trust in the BIOS to do things right,
3141 * which almost certainly means a new host of problems will
3142 * arise with broken BIOS implementations. screw 'em.
3143 * We're already intolerant of machines that don't assign
3147 /* do config work at full power */
3148 maestro_power(card
,ACPI_D0
);
3150 pci_read_config_word(pcidev
, 0x50, &w
);
3152 w
&=~(1<<5); /* Don't swap left/right (undoc)*/
3154 pci_write_config_word(pcidev
, 0x50, w
);
3156 pci_read_config_word(pcidev
, 0x52, &w
);
3157 w
&=~(1<<15); /* Turn off internal clock multiplier */
3158 /* XXX how do we know which to use? */
3159 w
&=~(1<<14); /* External clock */
3161 w
|= (1<<7); /* Hardware volume control on */
3162 w
|= (1<<6); /* Debounce off: easier to push the HWV buttons. */
3163 w
&=~(1<<5); /* GPIO 4:5 */
3164 w
|= (1<<4); /* Disconnect from the CHI. Enabling this made a dell 7500 work. */
3165 w
&=~(1<<2); /* MIDI fix off (undoc) */
3166 w
&=~(1<<1); /* reserved, always write 0 */
3167 pci_write_config_word(pcidev
, 0x52, w
);
3173 pci_read_config_word(pcidev
, 0x40, &w
);
3174 w
|=(1<<15); /* legacy decode off */
3175 w
&=~(1<<14); /* Disable SIRQ */
3176 w
&=~(0x1f); /* disable mpu irq/io, game port, fm, SB */
3178 pci_write_config_word(pcidev
, 0x40, w
);
3180 /* Set up 978 docking control chip. */
3181 pci_read_config_word(pcidev
, 0x58, &w
);
3182 w
|=1<<2; /* Enable 978. */
3183 w
|=1<<3; /* Turn on 978 hardware volume control. */
3184 w
&=~(1<<11); /* Turn on 978 mixer volume control. */
3185 pci_write_config_word(pcidev
, 0x58, w
);
3187 sound_reset(iobase
);
3193 /* setup usual 0x34 stuff.. 0x36 may be chip specific */
3194 outw(0xC090, iobase
+0x34); /* direct sound, stereo */
3196 outw(0x3000, iobase
+0x36); /* direct sound, stereo */
3204 maestro_ac97_reset(iobase
,pcidev
);
3212 n
|=12<<12; /* Direct Sound, Stereo */
3213 outl(n
, iobase
+0x34);
3216 n
&=~0x0F00; /* Modem off */
3217 outl(n
, iobase
+0x34);
3221 n
|=9<<4; /* DAC, Stereo */
3222 outl(n
, iobase
+0x34);
3225 n
&=~0x000F; /* ASSP off */
3226 outl(n
, iobase
+0x34);
3229 n
|=(1<<29); /* Enable ring bus */
3230 outl(n
, iobase
+0x34);
3233 n
|=(1<<28); /* Enable serial bus */
3234 outl(n
, iobase
+0x34);
3237 n
&=~0x00F00000; /* MIC off */
3238 outl(n
, iobase
+0x34);
3241 n
&=~0x000F0000; /* I2S off */
3242 outl(n
, iobase
+0x34);
3246 w
&=~(1<<7); /* ClkRun off */
3247 outw(w
, iobase
+0x18);
3250 w
&=~(1<<6); /* Hardware volume control interrupt off... for now. */
3251 outw(w
, iobase
+0x18);
3254 w
&=~(1<<4); /* ASSP irq off */
3255 outw(w
, iobase
+0x18);
3258 w
&=~(1<<3); /* ISDN irq off */
3259 outw(w
, iobase
+0x18);
3262 w
|=(1<<2); /* Direct Sound IRQ on */
3263 outw(w
, iobase
+0x18);
3266 w
&=~(1<<1); /* MPU401 IRQ off */
3267 outw(w
, iobase
+0x18);
3270 w
|=(1<<0); /* SB IRQ on */
3271 outw(w
, iobase
+0x18);
3273 /* Set hardware volume control registers to midpoints.
3274 We can tell which button was pushed based on how they change. */
3275 outb(0x88, iobase
+0x1c);
3276 outb(0x88, iobase
+0x1d);
3277 outb(0x88, iobase
+0x1e);
3278 outb(0x88, iobase
+0x1f);
3280 /* it appears some maestros (dell 7500) only work if these are set,
3281 regardless of whether we use the assp or not. */
3283 outb(0, iobase
+0xA4);
3284 outb(3, iobase
+0xA2);
3285 outb(0, iobase
+0xA6);
3287 for(apu
=0;apu
<16;apu
++)
3289 /* Write 0 into the buffer area 0x1E0->1EF */
3290 outw(0x01E0+apu
, 0x10+iobase
);
3291 outw(0x0000, 0x12+iobase
);
3294 * The 1.10 test program seem to write 0 into the buffer area
3297 outw(0x01D0+apu
, 0x10+iobase
);
3298 outw(0x0000, 0x12+iobase
);
3302 wave_set_register(ess
, IDR7_WAVE_ROMRAM
,
3303 (wave_get_register(ess
, IDR7_WAVE_ROMRAM
)&0xFF00));
3304 wave_set_register(ess
, IDR7_WAVE_ROMRAM
,
3305 wave_get_register(ess
, IDR7_WAVE_ROMRAM
)|0x100);
3306 wave_set_register(ess
, IDR7_WAVE_ROMRAM
,
3307 wave_get_register(ess
, IDR7_WAVE_ROMRAM
)&~0x200);
3308 wave_set_register(ess
, IDR7_WAVE_ROMRAM
,
3309 wave_get_register(ess
, IDR7_WAVE_ROMRAM
)|~0x400);
3311 maestro_write(ess
, IDR7_WAVE_ROMRAM
,
3312 (maestro_read(ess
, IDR7_WAVE_ROMRAM
)&0xFF00));
3313 maestro_write(ess
, IDR7_WAVE_ROMRAM
,
3314 maestro_read(ess
, IDR7_WAVE_ROMRAM
)|0x100);
3315 maestro_write(ess
, IDR7_WAVE_ROMRAM
,
3316 maestro_read(ess
, IDR7_WAVE_ROMRAM
)&~0x200);
3317 maestro_write(ess
, IDR7_WAVE_ROMRAM
,
3318 maestro_read(ess
, IDR7_WAVE_ROMRAM
)|0x400);
3321 maestro_write(ess
, IDR2_CRAM_DATA
, 0x0000);
3322 maestro_write(ess
, 0x08, 0xB004);
3323 /* Now back to the DirectSound stuff */
3324 maestro_write(ess
, 0x09, 0x001B);
3325 maestro_write(ess
, 0x0A, 0x8000);
3326 maestro_write(ess
, 0x0B, 0x3F37);
3327 maestro_write(ess
, 0x0C, 0x0098);
3329 /* parallel out ?? */
3330 maestro_write(ess
, 0x0C,
3331 (maestro_read(ess
, 0x0C)&~0xF000)|0x8000);
3332 /* parallel in, has something to do with recording :) */
3333 maestro_write(ess
, 0x0C,
3334 (maestro_read(ess
, 0x0C)&~0x0F00)|0x0500);
3336 maestro_write(ess
, 0x0D, 0x7632);
3338 /* Wave cache control on - test off, sg off,
3339 enable, enable extra chans 1Mb */
3341 outw(inw(0x14+iobase
)|(1<<8),0x14+iobase
);
3342 outw(inw(0x14+iobase
)&0xFE03,0x14+iobase
);
3343 outw((inw(0x14+iobase
)&0xFFFC), 0x14+iobase
);
3344 outw(inw(0x14+iobase
)|(1<<7),0x14+iobase
);
3346 outw(0xA1A0, 0x14+iobase
); /* 0300 ? */
3348 /* Now clear the APU control ram */
3349 for(apu
=0;apu
<NR_APUS
;apu
++)
3351 for(w
=0;w
<NR_APU_REGS
;w
++)
3352 apu_set_register(ess
, apu
|ESS_CHAN_HARD
, w
, 0);
3360 /* this guy tries to find the pci power management
3361 * register bank. this should really be in core
3362 * code somewhere. 1 on success. */
3364 parse_power(struct ess_card
*card
, struct pci_dev
*pcidev
)
3369 int max
= 64; /* an a 8bit guy pointing to 32bit guys
3370 can only express so much. */
3372 card
->power_regs
= 0;
3374 /* check to see if we have a capabilities list in
3375 the config register */
3376 pci_read_config_word(pcidev
, PCI_STATUS
, &w
);
3377 if(!(w
& PCI_STATUS_CAP_LIST
)) return 0;
3379 /* walk the list, starting at the head. */
3380 pci_read_config_byte(pcidev
,PCI_CAPABILITY_LIST
,&next
);
3382 while(next
&& max
--) {
3383 pci_read_config_dword(pcidev
, next
& ~3, &n
);
3384 if((n
& 0xff) == PCI_CAP_ID_PM
) {
3385 card
->power_regs
= next
;
3388 next
= ((n
>>8) & 0xff);
3391 return card
->power_regs
? 1 : 0;
3395 maestro_probe(struct pci_dev
*pcidev
,const struct pci_device_id
*pdid
)
3397 int card_type
= pdid
->driver_data
;
3401 struct ess_card
*card
;
3402 struct ess_state
*ess
;
3405 /* when built into the kernel, we only print version if device is found */
3407 static int printed_version
;
3408 if (!printed_version
++)
3412 /* don't pick up weird modem maestros */
3413 if(((pcidev
->class >> 8) & 0xffff) != PCI_CLASS_MULTIMEDIA_AUDIO
)
3417 if ((ret
=pci_enable_device(pcidev
)))
3420 iobase
= pci_resource_start(pcidev
,0);
3421 if (!iobase
|| !(pci_resource_flags(pcidev
, 0 ) & IORESOURCE_IO
))
3424 if(pcidev
->irq
== 0)
3427 /* stake our claim on the iospace */
3428 if( request_region(iobase
, 256, card_names
[card_type
]) == NULL
)
3430 printk(KERN_WARNING
"maestro: can't allocate 256 bytes I/O at 0x%4.4x\n", iobase
);
3434 /* just to be sure */
3435 pci_set_master(pcidev
);
3437 card
= kmalloc(sizeof(struct ess_card
), GFP_KERNEL
);
3440 printk(KERN_WARNING
"maestro: out of memory\n");
3441 release_region(iobase
, 256);
3445 memset(card
, 0, sizeof(*card
));
3446 card
->pcidev
= pcidev
;
3448 card
->iobase
= iobase
;
3449 card
->card_type
= card_type
;
3450 card
->irq
= pcidev
->irq
;
3451 card
->magic
= ESS_CARD_MAGIC
;
3452 spin_lock_init(&card
->lock
);
3453 init_waitqueue_head(&card
->suspend_queue
);
3455 card
->dock_mute_vol
= 50;
3457 /* init our groups of 6 apus */
3458 for(i
=0;i
<NR_DSPS
;i
++)
3460 struct ess_state
*s
=&card
->channels
[i
];
3465 init_waitqueue_head(&s
->dma_adc
.wait
);
3466 init_waitqueue_head(&s
->dma_dac
.wait
);
3467 init_waitqueue_head(&s
->open_wait
);
3468 spin_lock_init(&s
->lock
);
3469 init_MUTEX(&s
->open_sem
);
3470 s
->magic
= ESS_STATE_MAGIC
;
3473 s
->apu
[1] = (6*i
)+1;
3474 s
->apu
[2] = (6*i
)+2;
3475 s
->apu
[3] = (6*i
)+3;
3476 s
->apu
[4] = (6*i
)+4;
3477 s
->apu
[5] = (6*i
)+5;
3479 if(s
->dma_adc
.ready
|| s
->dma_dac
.ready
|| s
->dma_adc
.rawbuf
)
3480 printk("maestro: BOTCH!\n");
3481 /* register devices */
3482 if ((s
->dev_audio
= register_sound_dsp(&ess_audio_fops
, -1)) < 0)
3488 /* clear the rest if we ran out of slots to register */
3491 struct ess_state
*s
=&card
->channels
[i
];
3495 ess
= &card
->channels
[0];
3498 * Ok card ready. Begin setup proper
3501 printk(KERN_INFO
"maestro: Configuring %s found at IO 0x%04X IRQ %d\n",
3502 card_names
[card_type
],iobase
,card
->irq
);
3503 pci_read_config_dword(pcidev
, PCI_SUBSYSTEM_VENDOR_ID
, &n
);
3504 printk(KERN_INFO
"maestro: subvendor id: 0x%08x\n",n
);
3506 /* turn off power management unless:
3507 * - the user explicitly asks for it
3509 * - we're not a 2e, lesser chipps seem to have problems.
3510 * - we're not on our _very_ small whitelist. some implemenetations
3511 * really don't like the pm code, others require it.
3512 * feel free to expand this as required.
3514 #define SUBSYSTEM_VENDOR(x) (x&0xffff)
3515 if( (use_pm
!= 1) &&
3516 ((card_type
!= TYPE_MAESTRO2E
) || (SUBSYSTEM_VENDOR(n
) != 0x1028)))
3520 printk(KERN_INFO
"maestro: not attempting power management.\n");
3522 if(!parse_power(card
,pcidev
))
3523 printk(KERN_INFO
"maestro: no PCI power management interface found.\n");
3525 pci_read_config_dword(pcidev
, card
->power_regs
, &n
);
3526 printk(KERN_INFO
"maestro: PCI power management capability: 0x%x\n",n
>>16);
3530 maestro_config(card
);
3532 if(maestro_ac97_get(card
, 0x00)==0x0080) {
3533 printk(KERN_ERR
"maestro: my goodness! you seem to have a pt101 codec, which is quite rare.\n"
3534 "\tyou should tell someone about this.\n");
3536 maestro_ac97_init(card
);
3539 if ((card
->dev_mixer
= register_sound_mixer(&ess_mixer_fops
, -1)) < 0) {
3540 printk("maestro: couldn't register mixer!\n");
3542 memcpy(card
->mix
.mixer_state
,mixer_defaults
,sizeof(card
->mix
.mixer_state
));
3543 mixer_push_state(card
);
3546 if((ret
=request_irq(card
->irq
, ess_interrupt
, SA_SHIRQ
, card_names
[card_type
], card
)))
3548 printk(KERN_ERR
"maestro: unable to allocate irq %d,\n", card
->irq
);
3549 unregister_sound_mixer(card
->dev_mixer
);
3550 for(i
=0;i
<NR_DSPS
;i
++)
3552 struct ess_state
*s
= &card
->channels
[i
];
3553 if(s
->dev_audio
!= -1)
3554 unregister_sound_dsp(s
->dev_audio
);
3556 release_region(card
->iobase
, 256);
3557 unregister_reboot_notifier(&maestro_nb
);
3562 /* Turn on hardware volume control interrupt.
3563 This has to come after we grab the IRQ above,
3564 or a crash will result on installation if a button has been pressed,
3565 because in that case we'll get an immediate interrupt. */
3566 n
= inw(iobase
+0x18);
3568 outw(n
, iobase
+0x18);
3570 pci_set_drvdata(pcidev
,card
);
3571 /* now go to sleep 'till something interesting happens */
3572 maestro_power(card
,ACPI_D2
);
3574 printk(KERN_INFO
"maestro: %d channels configured.\n", num
);
3578 static void maestro_remove(struct pci_dev
*pcidev
) {
3579 struct ess_card
*card
= pci_get_drvdata(pcidev
);
3583 /* XXX maybe should force stop bob, but should be all
3584 stopped by _release by now */
3586 /* Turn off hardware volume control interrupt.
3587 This has to come before we leave the IRQ below,
3588 or a crash results if a button is pressed ! */
3589 n
= inw(card
->iobase
+0x18);
3591 outw(n
, card
->iobase
+0x18);
3593 free_irq(card
->irq
, card
);
3594 unregister_sound_mixer(card
->dev_mixer
);
3595 for(i
=0;i
<NR_DSPS
;i
++)
3597 struct ess_state
*ess
= &card
->channels
[i
];
3598 if(ess
->dev_audio
!= -1)
3599 unregister_sound_dsp(ess
->dev_audio
);
3601 /* Goodbye, Mr. Bond. */
3602 maestro_power(card
,ACPI_D3
);
3603 release_region(card
->iobase
, 256);
3605 pci_set_drvdata(pcidev
,NULL
);
3608 static struct pci_device_id maestro_pci_tbl
[] = {
3609 {PCI_VENDOR_ESS
, PCI_DEVICE_ID_ESS_ESS1968
, PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, TYPE_MAESTRO2
},
3610 {PCI_VENDOR_ESS
, PCI_DEVICE_ID_ESS_ESS1978
, PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, TYPE_MAESTRO2E
},
3611 {PCI_VENDOR_ESS_OLD
, PCI_DEVICE_ID_ESS_ESS0100
, PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, TYPE_MAESTRO
},
3614 MODULE_DEVICE_TABLE(pci
, maestro_pci_tbl
);
3616 static struct pci_driver maestro_pci_driver
= {
3618 .id_table
= maestro_pci_tbl
,
3619 .probe
= maestro_probe
,
3620 .remove
= maestro_remove
,
3623 static int __init
init_maestro(void)
3627 rc
= pci_register_driver(&maestro_pci_driver
);
3631 if (register_reboot_notifier(&maestro_nb
))
3632 printk(KERN_WARNING
"maestro: reboot notifier registration failed; may not reboot properly.\n");
3636 if (dsps_order
< 0) {
3638 printk(KERN_WARNING
"maestro: clipping dsps_order to %d\n",dsps_order
);
3640 else if (dsps_order
> MAX_DSP_ORDER
) {
3641 dsps_order
= MAX_DSP_ORDER
;
3642 printk(KERN_WARNING
"maestro: clipping dsps_order to %d\n",dsps_order
);
3647 static int maestro_notifier(struct notifier_block
*nb
, unsigned long event
, void *buf
)
3649 /* this notifier is called when the kernel is really shut down. */
3650 M_printk("maestro: shutting down\n");
3651 /* this will remove all card instances too */
3652 pci_unregister_driver(&maestro_pci_driver
);
3653 /* XXX dunno about power management */
3657 /* --------------------------------------------------------------------- */
3660 static void cleanup_maestro(void) {
3661 M_printk("maestro: unloading\n");
3662 pci_unregister_driver(&maestro_pci_driver
);
3663 unregister_reboot_notifier(&maestro_nb
);
3666 /* --------------------------------------------------------------------- */
3669 check_suspend(struct ess_card
*card
)
3671 DECLARE_WAITQUEUE(wait
, current
);
3673 if(!card
->in_suspend
) return;
3676 add_wait_queue(&(card
->suspend_queue
), &wait
);
3677 current
->state
= TASK_UNINTERRUPTIBLE
;
3679 remove_wait_queue(&(card
->suspend_queue
), &wait
);
3680 current
->state
= TASK_RUNNING
;
3683 module_init(init_maestro
);
3684 module_exit(cleanup_maestro
);