include/linux/mc146818rtc.h

   1 /* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
   2  * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
   3  * derived from Data Sheet, Copyright Motorola 1984 (!).
   4  * It was written to be part of the Linux operating system.
   5  */
   6 /* permission is hereby granted to copy, modify and redistribute this code
   7  * in terms of the GNU Library General Public License, Version 2 or later,
   8  * at your option.
   9  */
  10
  11 #ifndef _MC146818RTC_H
  12 #define _MC146818RTC_H
  13
  14 #include <asm/io.h>
  15 #include <linux/rtc.h>                  /* get the user-level API */
  16 #include <asm/mc146818rtc.h>            /* register access macros */
  17
  18 #ifdef __KERNEL__
  19 #include <linux/spinlock.h>             /* spinlock_t */
  20 extern spinlock_t rtc_lock;             /* serialize CMOS RAM access */
  21 #endif
  22
  23 /**********************************************************************
  24  * register summary
  25  **********************************************************************/
  26 #define RTC_SECONDS             0
  27 #define RTC_SECONDS_ALARM       1
  28 #define RTC_MINUTES             2
  29 #define RTC_MINUTES_ALARM       3
  30 #define RTC_HOURS               4
  31 #define RTC_HOURS_ALARM         5
  32 /* RTC_*_alarm is always true if 2 MSBs are set */
  33 # define RTC_ALARM_DONT_CARE    0xC0
  34
  35 #define RTC_DAY_OF_WEEK         6
  36 #define RTC_DAY_OF_MONTH        7
  37 #define RTC_MONTH               8
  38 #define RTC_YEAR                9
  39
  40 /* control registers - Moto names
  41  */
  42 #define RTC_REG_A               10
  43 #define RTC_REG_B               11
  44 #define RTC_REG_C               12
  45 #define RTC_REG_D               13
  46
  47 /**********************************************************************
  48  * register details
  49  **********************************************************************/
  50 #define RTC_FREQ_SELECT RTC_REG_A
  51
  52 /* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
  53  * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
  54  * totalling to a max high interval of 2.228 ms.
  55  */
  56 # define RTC_UIP                0x80
  57 # define RTC_DIV_CTL            0x70
  58    /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
  59 #  define RTC_REF_CLCK_4MHZ     0x00
  60 #  define RTC_REF_CLCK_1MHZ     0x10
  61 #  define RTC_REF_CLCK_32KHZ    0x20
  62    /* 2 values for divider stage reset, others for "testing purposes only" */
  63 #  define RTC_DIV_RESET1        0x60
  64 #  define RTC_DIV_RESET2        0x70
  65   /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
  66 # define RTC_RATE_SELECT        0x0F
  67
  68 /**********************************************************************/
  69 #define RTC_CONTROL     RTC_REG_B
  70 # define RTC_SET 0x80           /* disable updates for clock setting */
  71 # define RTC_PIE 0x40           /* periodic interrupt enable */
  72 # define RTC_AIE 0x20           /* alarm interrupt enable */
  73 # define RTC_UIE 0x10           /* update-finished interrupt enable */
  74 # define RTC_SQWE 0x08          /* enable square-wave output */
  75 # define RTC_DM_BINARY 0x04     /* all time/date values are BCD if clear */
  76 # define RTC_24H 0x02           /* 24 hour mode - else hours bit 7 means pm */
  77 # define RTC_DST_EN 0x01        /* auto switch DST - works f. USA only */
  78
  79 /**********************************************************************/
  80 #define RTC_INTR_FLAGS  RTC_REG_C
  81 /* caution - cleared by read */
  82 # define RTC_IRQF 0x80          /* any of the following 3 is active */
  83 # define RTC_PF 0x40
  84 # define RTC_AF 0x20
  85 # define RTC_UF 0x10
  86
  87 /**********************************************************************/
  88 #define RTC_VALID       RTC_REG_D
  89 # define RTC_VRT 0x80           /* valid RAM and time */
  90 /**********************************************************************/
  91
  92 #ifndef ARCH_RTC_LOCATION       /* Override by <asm/mc146818rtc.h>? */
  93
  94 #define RTC_IO_EXTENT   0x8
  95 #define RTC_IOMAPPED    1       /* Default to I/O mapping. */
  96
  97 #endif /* ARCH_RTC_LOCATION */
  98
  99 #endif /* _MC146818RTC_H */