?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Xilinx: ARM: adding xylon IP snippet dts file
[linux-2.6-xlnx.git] / drivers / tty / serial / serial_cs.c
blobeef736ff810af9d03a5a5036b682b4ac479b6084
1 /*======================================================================
2
3 A driver for PCMCIA serial devices
4
5 serial_cs.c 1.134 2002/05/04 05:48:53
6
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
11
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
16
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
31
32 ======================================================================*/
33
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/ptrace.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 #include <linux/timer.h>
42 #include <linux/serial_core.h>
43 #include <linux/delay.h>
44 #include <linux/major.h>
45 #include <asm/io.h>
46 #include <asm/system.h>
47
48 #include <pcmcia/cistpl.h>
49 #include <pcmcia/ciscode.h>
50 #include <pcmcia/ds.h>
51 #include <pcmcia/cisreg.h>
52
53 #include "8250.h"
54
55
56 /*====================================================================*/
57
58 /* Parameters that can be set with 'insmod' */
59
60 /* Enable the speaker? */
61 static int do_sound = 1;
62 /* Skip strict UART tests? */
63 static int buggy_uart;
64
65 module_param(do_sound, int, 0444);
66 module_param(buggy_uart, int, 0444);
67
68 /*====================================================================*/
69
70 /* Table of multi-port card ID's */
71
72 struct serial_quirk {
73 unsigned int manfid;
74 unsigned int prodid;
75 int multi; /* 1 = multifunction, > 1 = # ports */
76 void (*config)(struct pcmcia_device *);
77 void (*setup)(struct pcmcia_device *, struct uart_port *);
78 void (*wakeup)(struct pcmcia_device *);
79 int (*post)(struct pcmcia_device *);
80 };
81
82 struct serial_info {
83 struct pcmcia_device *p_dev;
84 int ndev;
85 int multi;
86 int slave;
87 int manfid;
88 int prodid;
89 int c950ctrl;
90 int line[4];
91 const struct serial_quirk *quirk;
92 };
93
94 struct serial_cfg_mem {
95 tuple_t tuple;
96 cisparse_t parse;
97 u_char buf[256];
98 };
99
100 /*
101 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
102 * manfid 0x0160, 0x0104
103 * This card appears to have a 14.7456MHz clock.
104 */
105 /* Generic Modem: MD55x (GPRS/EDGE) have
106 * Elan VPU16551 UART with 14.7456MHz oscillator
107 * manfid 0x015D, 0x4C45
108 */
109 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
110 {
111 port->uartclk = 14745600;
112 }
113
114 static int quirk_post_ibm(struct pcmcia_device *link)
115 {
116 u8 val;
117 int ret;
118
119 ret = pcmcia_read_config_byte(link, 0x800, &val);
120 if (ret)
121 goto failed;
122
123 ret = pcmcia_write_config_byte(link, 0x800, val | 1);
124 if (ret)
125 goto failed;
126 return 0;
127
128 failed:
129 return -ENODEV;
130 }
131
132 /*
133 * Nokia cards are not really multiport cards. Shouldn't this
134 * be handled by setting the quirk entry .multi = 0 | 1 ?
135 */
136 static void quirk_config_nokia(struct pcmcia_device *link)
137 {
138 struct serial_info *info = link->priv;
139
140 if (info->multi > 1)
141 info->multi = 1;
142 }
143
144 static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
145 {
146 struct serial_info *info = link->priv;
147
148 if (info->c950ctrl)
149 outb(12, info->c950ctrl + 1);
150 }
151
152 /* request_region? oxsemi branch does no request_region too... */
153 /*
154 * This sequence is needed to properly initialize MC45 attached to OXCF950.
155 * I tried decreasing these msleep()s, but it worked properly (survived
156 * 1000 stop/start operations) with these timeouts (or bigger).
157 */
158 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
159 {
160 struct serial_info *info = link->priv;
161 unsigned int ctrl = info->c950ctrl;
162
163 outb(0xA, ctrl + 1);
164 msleep(100);
165 outb(0xE, ctrl + 1);
166 msleep(300);
167 outb(0xC, ctrl + 1);
168 msleep(100);
169 outb(0xE, ctrl + 1);
170 msleep(200);
171 outb(0xF, ctrl + 1);
172 msleep(100);
173 outb(0xE, ctrl + 1);
174 msleep(100);
175 outb(0xC, ctrl + 1);
176 }
177
178 /*
179 * Socket Dual IO: this enables irq's for second port
180 */
181 static void quirk_config_socket(struct pcmcia_device *link)
182 {
183 struct serial_info *info = link->priv;
184
185 if (info->multi)
186 link->config_flags |= CONF_ENABLE_ESR;
187 }
188
189 static const struct serial_quirk quirks[] = {
190 {
191 .manfid = 0x0160,
192 .prodid = 0x0104,
193 .multi = -1,
194 .setup = quirk_setup_brainboxes_0104,
195 }, {
196 .manfid = 0x015D,
197 .prodid = 0x4C45,
198 .multi = -1,
199 .setup = quirk_setup_brainboxes_0104,
200 }, {
201 .manfid = MANFID_IBM,
202 .prodid = ~0,
203 .multi = -1,
204 .post = quirk_post_ibm,
205 }, {
206 .manfid = MANFID_INTEL,
207 .prodid = PRODID_INTEL_DUAL_RS232,
208 .multi = 2,
209 }, {
210 .manfid = MANFID_NATINST,
211 .prodid = PRODID_NATINST_QUAD_RS232,
212 .multi = 4,
213 }, {
214 .manfid = MANFID_NOKIA,
215 .prodid = ~0,
216 .multi = -1,
217 .config = quirk_config_nokia,
218 }, {
219 .manfid = MANFID_OMEGA,
220 .prodid = PRODID_OMEGA_QSP_100,
221 .multi = 4,
222 }, {
223 .manfid = MANFID_OXSEMI,
224 .prodid = ~0,
225 .multi = -1,
226 .wakeup = quirk_wakeup_oxsemi,
227 }, {
228 .manfid = MANFID_POSSIO,
229 .prodid = PRODID_POSSIO_GCC,
230 .multi = -1,
231 .wakeup = quirk_wakeup_possio_gcc,
232 }, {
233 .manfid = MANFID_QUATECH,
234 .prodid = PRODID_QUATECH_DUAL_RS232,
235 .multi = 2,
236 }, {
237 .manfid = MANFID_QUATECH,
238 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
239 .multi = 2,
240 }, {
241 .manfid = MANFID_QUATECH,
242 .prodid = PRODID_QUATECH_DUAL_RS232_G,
243 .multi = 2,
244 }, {
245 .manfid = MANFID_QUATECH,
246 .prodid = PRODID_QUATECH_QUAD_RS232,
247 .multi = 4,
248 }, {
249 .manfid = MANFID_SOCKET,
250 .prodid = PRODID_SOCKET_DUAL_RS232,
251 .multi = 2,
252 .config = quirk_config_socket,
253 }, {
254 .manfid = MANFID_SOCKET,
255 .prodid = ~0,
256 .multi = -1,
257 .config = quirk_config_socket,
258 }
259 };
260
261
262 static int serial_config(struct pcmcia_device * link);
263
264
265 static void serial_remove(struct pcmcia_device *link)
266 {
267 struct serial_info *info = link->priv;
268 int i;
269
270 dev_dbg(&link->dev, "serial_release\n");
271
272 /*
273 * Recheck to see if the device is still configured.
274 */
275 for (i = 0; i < info->ndev; i++)
276 serial8250_unregister_port(info->line[i]);
277
278 if (!info->slave)
279 pcmcia_disable_device(link);
280 }
281
282 static int serial_suspend(struct pcmcia_device *link)
283 {
284 struct serial_info *info = link->priv;
285 int i;
286
287 for (i = 0; i < info->ndev; i++)
288 serial8250_suspend_port(info->line[i]);
289
290 return 0;
291 }
292
293 static int serial_resume(struct pcmcia_device *link)
294 {
295 struct serial_info *info = link->priv;
296 int i;
297
298 for (i = 0; i < info->ndev; i++)
299 serial8250_resume_port(info->line[i]);
300
301 if (info->quirk && info->quirk->wakeup)
302 info->quirk->wakeup(link);
303
304 return 0;
305 }
306
307 static int serial_probe(struct pcmcia_device *link)
308 {
309 struct serial_info *info;
310
311 dev_dbg(&link->dev, "serial_attach()\n");
312
313 /* Create new serial device */
314 info = kzalloc(sizeof (*info), GFP_KERNEL);
315 if (!info)
316 return -ENOMEM;
317 info->p_dev = link;
318 link->priv = info;
319
320 link->config_flags |= CONF_ENABLE_IRQ;
321 if (do_sound)
322 link->config_flags |= CONF_ENABLE_SPKR;
323
324 return serial_config(link);
325 }
326
327 static void serial_detach(struct pcmcia_device *link)
328 {
329 struct serial_info *info = link->priv;
330
331 dev_dbg(&link->dev, "serial_detach\n");
332
333 /*
334 * Ensure that the ports have been released.
335 */
336 serial_remove(link);
337
338 /* free bits */
339 kfree(info);
340 }
341
342 /*====================================================================*/
343
344 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
345 unsigned int iobase, int irq)
346 {
347 struct uart_port port;
348 int line;
349
350 memset(&port, 0, sizeof (struct uart_port));
351 port.iobase = iobase;
352 port.irq = irq;
353 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
354 port.uartclk = 1843200;
355 port.dev = &handle->dev;
356 if (buggy_uart)
357 port.flags |= UPF_BUGGY_UART;
358
359 if (info->quirk && info->quirk->setup)
360 info->quirk->setup(handle, &port);
361
362 line = serial8250_register_port(&port);
363 if (line < 0) {
364 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
365 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
366 return -EINVAL;
367 }
368
369 info->line[info->ndev] = line;
370 info->ndev++;
371
372 return 0;
373 }
374
375 /*====================================================================*/
376
377 static int pfc_config(struct pcmcia_device *p_dev)
378 {
379 unsigned int port = 0;
380 struct serial_info *info = p_dev->priv;
381
382 if ((p_dev->resource[1]->end != 0) &&
383 (resource_size(p_dev->resource[1]) == 8)) {
384 port = p_dev->resource[1]->start;
385 info->slave = 1;
386 } else if ((info->manfid == MANFID_OSITECH) &&
387 (resource_size(p_dev->resource[0]) == 0x40)) {
388 port = p_dev->resource[0]->start + 0x28;
389 info->slave = 1;
390 }
391 if (info->slave)
392 return setup_serial(p_dev, info, port, p_dev->irq);
393
394 dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
395 return -ENODEV;
396 }
397
398 static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
399 {
400 static const int size_table[2] = { 8, 16 };
401 int *try = priv_data;
402
403 if (p_dev->resource[0]->start == 0)
404 return -ENODEV;
405
406 if ((*try & 0x1) == 0)
407 p_dev->io_lines = 16;
408
409 if (p_dev->resource[0]->end != size_table[(*try >> 1)])
410 return -ENODEV;
411
412 p_dev->resource[0]->end = 8;
413 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
414 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
415
416 return pcmcia_request_io(p_dev);
417 }
418
419 static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
420 void *priv_data)
421 {
422 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
423 int j;
424
425 if (p_dev->io_lines > 3)
426 return -ENODEV;
427
428 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
429 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
430 p_dev->resource[0]->end = 8;
431
432 for (j = 0; j < 5; j++) {
433 p_dev->resource[0]->start = base[j];
434 p_dev->io_lines = base[j] ? 16 : 3;
435 if (!pcmcia_request_io(p_dev))
436 return 0;
437 }
438 return -ENODEV;
439 }
440
441 static int simple_config(struct pcmcia_device *link)
442 {
443 struct serial_info *info = link->priv;
444 int i = -ENODEV, try;
445
446 /* First pass: look for a config entry that looks normal.
447 * Two tries: without IO aliases, then with aliases */
448 link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO;
449 for (try = 0; try < 4; try++)
450 if (!pcmcia_loop_config(link, simple_config_check, &try))
451 goto found_port;
452
453 /* Second pass: try to find an entry that isn't picky about
454 its base address, then try to grab any standard serial port
455 address, and finally try to get any free port. */
456 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
457 goto found_port;
458
459 dev_warn(&link->dev, "no usable port range found, giving up\n");
460 return -1;
461
462 found_port:
463 if (info->multi && (info->manfid == MANFID_3COM))
464 link->config_index &= ~(0x08);
465
466 /*
467 * Apply any configuration quirks.
468 */
469 if (info->quirk && info->quirk->config)
470 info->quirk->config(link);
471
472 i = pcmcia_enable_device(link);
473 if (i != 0)
474 return -1;
475 return setup_serial(link, info, link->resource[0]->start, link->irq);
476 }
477
478 static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
479 {
480 int *multi = priv_data;
481
482 if (p_dev->resource[1]->end)
483 return -EINVAL;
484
485 /* The quad port cards have bad CIS's, so just look for a
486 window larger than 8 ports and assume it will be right */
487 if (p_dev->resource[0]->end <= 8)
488 return -EINVAL;
489
490 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
491 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
492 p_dev->resource[0]->end = *multi * 8;
493
494 if (pcmcia_request_io(p_dev))
495 return -ENODEV;
496 return 0;
497 }
498
499 static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
500 void *priv_data)
501 {
502 int *base2 = priv_data;
503
504 if (!p_dev->resource[0]->end || !p_dev->resource[1]->end)
505 return -ENODEV;
506
507 p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
508 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
509 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
510
511 if (pcmcia_request_io(p_dev))
512 return -ENODEV;
513
514 *base2 = p_dev->resource[0]->start + 8;
515 return 0;
516 }
517
518 static int multi_config(struct pcmcia_device *link)
519 {
520 struct serial_info *info = link->priv;
521 int i, base2 = 0;
522
523 link->config_flags |= CONF_AUTO_SET_IO;
524 /* First, look for a generic full-sized window */
525 if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
526 base2 = link->resource[0]->start + 8;
527 else {
528 /* If that didn't work, look for two windows */
529 info->multi = 2;
530 if (pcmcia_loop_config(link, multi_config_check_notpicky,
531 &base2)) {
532 dev_warn(&link->dev, "no usable port range "
533 "found, giving up\n");
534 return -ENODEV;
535 }
536 }
537
538 if (!link->irq)
539 dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
540
541 /*
542 * Apply any configuration quirks.
543 */
544 if (info->quirk && info->quirk->config)
545 info->quirk->config(link);
546
547 i = pcmcia_enable_device(link);
548 if (i != 0)
549 return -ENODEV;
550
551 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
552 * 8 registers are for the UART, the others are extra registers.
553 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
554 */
555 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
556 info->prodid == PRODID_POSSIO_GCC)) {
557 int err;
558
559 if (link->config_index == 1 ||
560 link->config_index == 3) {
561 err = setup_serial(link, info, base2,
562 link->irq);
563 base2 = link->resource[0]->start;
564 } else {
565 err = setup_serial(link, info, link->resource[0]->start,
566 link->irq);
567 }
568 info->c950ctrl = base2;
569
570 /*
571 * FIXME: We really should wake up the port prior to
572 * handing it over to the serial layer.
573 */
574 if (info->quirk && info->quirk->wakeup)
575 info->quirk->wakeup(link);
576
577 return 0;
578 }
579
580 setup_serial(link, info, link->resource[0]->start, link->irq);
581 for (i = 0; i < info->multi - 1; i++)
582 setup_serial(link, info, base2 + (8 * i),
583 link->irq);
584 return 0;
585 }
586
587 static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
588 {
589 struct serial_info *info = p_dev->priv;
590
591 if (!p_dev->resource[0]->end)
592 return -EINVAL;
593
594 if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
595 info->multi = p_dev->resource[0]->end >> 3;
596
597 if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
598 && (p_dev->resource[1]->end == 8))
599 info->multi = 2;
600
601 return 0; /* break */
602 }
603
604
605 static int serial_config(struct pcmcia_device * link)
606 {
607 struct serial_info *info = link->priv;
608 int i;
609
610 dev_dbg(&link->dev, "serial_config\n");
611
612 /* Is this a compliant multifunction card? */
613 info->multi = (link->socket->functions > 1);
614
615 /* Is this a multiport card? */
616 info->manfid = link->manf_id;
617 info->prodid = link->card_id;
618
619 for (i = 0; i < ARRAY_SIZE(quirks); i++)
620 if ((quirks[i].manfid == ~0 ||
621 quirks[i].manfid == info->manfid) &&
622 (quirks[i].prodid == ~0 ||
623 quirks[i].prodid == info->prodid)) {
624 info->quirk = &quirks[i];
625 break;
626 }
627
628 /* Another check for dual-serial cards: look for either serial or
629 multifunction cards that ask for appropriate IO port ranges */
630 if ((info->multi == 0) &&
631 (link->has_func_id) &&
632 (link->socket->pcmcia_pfc == 0) &&
633 ((link->func_id == CISTPL_FUNCID_MULTI) ||
634 (link->func_id == CISTPL_FUNCID_SERIAL)))
635 pcmcia_loop_config(link, serial_check_for_multi, info);
636
637 /*
638 * Apply any multi-port quirk.
639 */
640 if (info->quirk && info->quirk->multi != -1)
641 info->multi = info->quirk->multi;
642
643 dev_info(&link->dev,
644 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
645 link->manf_id, link->card_id,
646 link->socket->pcmcia_pfc, info->multi, info->quirk);
647 if (link->socket->pcmcia_pfc)
648 i = pfc_config(link);
649 else if (info->multi > 1)
650 i = multi_config(link);
651 else
652 i = simple_config(link);
653
654 if (i || info->ndev == 0)
655 goto failed;
656
657 /*
658 * Apply any post-init quirk. FIXME: This should really happen
659 * before we register the port, since it might already be in use.
660 */
661 if (info->quirk && info->quirk->post)
662 if (info->quirk->post(link))
663 goto failed;
664
665 return 0;
666
667 failed:
668 dev_warn(&link->dev, "failed to initialize\n");
669 serial_remove(link);
670 return -ENODEV;
671 }
672
673 static const struct pcmcia_device_id serial_ids[] = {
674 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
675 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
676 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
677 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
678 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
679 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
680 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
681 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
682 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
683 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
684 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
685 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
686 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
687 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
688 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
689 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
690 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
691 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
692 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
693 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
694 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
695 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
696 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
697 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
698 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
699 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
700 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
701 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
702 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
703 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
704 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
705 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
706 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
707 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
708 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
709 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
710 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
711 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
712 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
713 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
714 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
715 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
716 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
717 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
718 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
719 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
720 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
721 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
722 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
723 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
724 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
725 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
726 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
727 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
728 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
729 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
730 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
731 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
732 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
733 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
734 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
735 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
736 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
737 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
738 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
739 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
740 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
741 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
742 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
743 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
744 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
745 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
746 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
747 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
748 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
749 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
750 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
751 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
752 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
753 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
754 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
755 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
756 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
757 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
758 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
759 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
760 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
761 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
762 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
763 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
764 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
765 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
766 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
767 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
768 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
769 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
770 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
771 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
772 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
773 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
774 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
775 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
776 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
777 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
778 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
779 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
780 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
781 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
782 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
783 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
784 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
785 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
786 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
787 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
788 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
789 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
790 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
791 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
792 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
793 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
794 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
795 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
796 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
797 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
798 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
799 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
800 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
801 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
802 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
803 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
804 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
805 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
806 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
807 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
808 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
809 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
810 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
811 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
812 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
813 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
814 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
815 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
816 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
817 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
818 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
819 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
820 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
821 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
822 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
823 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
824 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
825 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
826 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
827 /* too generic */
828 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
829 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
830 PCMCIA_DEVICE_FUNC_ID(2),
831 PCMCIA_DEVICE_NULL,
832 };
833 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
834
835 MODULE_FIRMWARE("cis/PCMLM28.cis");
836 MODULE_FIRMWARE("cis/DP83903.cis");
837 MODULE_FIRMWARE("cis/3CCFEM556.cis");
838 MODULE_FIRMWARE("cis/3CXEM556.cis");
839 MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
840 MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
841 MODULE_FIRMWARE("cis/SW_555_SER.cis");
842 MODULE_FIRMWARE("cis/MT5634ZLX.cis");
843 MODULE_FIRMWARE("cis/COMpad2.cis");
844 MODULE_FIRMWARE("cis/COMpad4.cis");
845 MODULE_FIRMWARE("cis/RS-COM-2P.cis");
846
847 static struct pcmcia_driver serial_cs_driver = {
848 .owner = THIS_MODULE,
849 .name = "serial_cs",
850 .probe = serial_probe,
851 .remove = serial_detach,
852 .id_table = serial_ids,
853 .suspend = serial_suspend,
854 .resume = serial_resume,
855 };
856
857 static int __init init_serial_cs(void)
858 {
859 return pcmcia_register_driver(&serial_cs_driver);
860 }
861
862 static void __exit exit_serial_cs(void)
863 {
864 pcmcia_unregister_driver(&serial_cs_driver);
865 }
866
867 module_init(init_serial_cs);
868 module_exit(exit_serial_cs);
869
870 MODULE_LICENSE("GPL");