3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
6 # All text after a hash (#) is considered a comment and will be ignored
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
17 # This tag specifies the encoding used for all characters in the config file
18 # that follow. The default is UTF-8 which is also the encoding used for all
19 # text before the first occurrence of this tag. Doxygen uses libiconv (or the
20 # iconv built into libc) for the transcoding. See
21 # http://www.gnu.org/software/libiconv for the list of possible encodings.
23 DOXYFILE_ENCODING = UTF-8
25 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26 # by quotes) that should identify the project.
30 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
31 # This could be handy for archiving the generated documentation or
32 # if some version control system is used.
36 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37 # base path where the generated documentation will be put.
38 # If a relative path is entered, it will be relative to the location
39 # where doxygen was started. If left blank the current directory will be used.
41 OUTPUT_DIRECTORY = docs
43 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44 # 4096 sub-directories (in 2 levels) under the output directory of each output
45 # format and will distribute the generated files over these directories.
46 # Enabling this option can be useful when feeding doxygen a huge amount of
47 # source files, where putting all generated files in the same directory would
48 # otherwise cause performance problems for the file system.
52 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
53 # documentation generated by doxygen is written. Doxygen will use this
54 # information to generate all constant output in the proper language.
55 # The default language is English, other supported languages are:
56 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57 # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
58 # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
59 # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
60 # Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
61 # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
63 OUTPUT_LANGUAGE = English
65 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66 # include brief member descriptions after the members that are listed in
67 # the file and class documentation (similar to JavaDoc).
68 # Set to NO to disable this.
70 BRIEF_MEMBER_DESC = YES
72 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73 # the brief description of a member or function before the detailed description.
74 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75 # brief descriptions will be completely suppressed.
79 # This tag implements a quasi-intelligent brief description abbreviator
80 # that is used to form the text in various listings. Each string
81 # in this list, if found as the leading text of the brief description, will be
82 # stripped from the text and the result after processing the whole list, is
83 # used as the annotated text. Otherwise, the brief description is used as-is.
84 # If left blank, the following values are used ("$name" is automatically
85 # replaced with the name of the entity): "The $name class" "The $name widget"
86 # "The $name file" "is" "provides" "specifies" "contains"
87 # "represents" "a" "an" "the"
89 ABBREVIATE_BRIEF = "The $name class " \
101 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
102 # Doxygen will generate a detailed section even if there is only a brief
105 ALWAYS_DETAILED_SEC = NO
107 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
108 # inherited members of a class in the documentation of that class as if those
109 # members were ordinary class members. Constructors, destructors and assignment
110 # operators of the base classes will not be shown.
112 INLINE_INHERITED_MEMB = NO
114 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
115 # path before files name in the file list and in the header files. If set
116 # to NO the shortest path that makes the file name unique will be used.
118 FULL_PATH_NAMES = YES
120 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
121 # can be used to strip a user-defined part of the path. Stripping is
122 # only done if one of the specified strings matches the left-hand part of
123 # the path. The tag can be used to show relative paths in the file list.
124 # If left blank the directory from which doxygen is run is used as the
129 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
130 # the path mentioned in the documentation of a class, which tells
131 # the reader which header file to include in order to use a class.
132 # If left blank only the name of the header file containing the class
133 # definition is used. Otherwise one should specify the include paths that
134 # are normally passed to the compiler using the -I flag.
136 STRIP_FROM_INC_PATH =
138 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
139 # (but less readable) file names. This can be useful is your file systems
140 # doesn't support long names like on DOS, Mac, or CD-ROM.
144 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
145 # will interpret the first line (until the first dot) of a JavaDoc-style
146 # comment as the brief description. If set to NO, the JavaDoc
147 # comments will behave just like regular Qt-style comments
148 # (thus requiring an explicit @brief command for a brief description.)
150 JAVADOC_AUTOBRIEF = NO
152 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
153 # interpret the first line (until the first dot) of a Qt-style
154 # comment as the brief description. If set to NO, the comments
155 # will behave just like regular Qt-style comments (thus requiring
156 # an explicit \brief command for a brief description.)
160 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
161 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
162 # comments) as a brief description. This used to be the default behaviour.
163 # The new default is to treat a multi-line C++ comment block as a detailed
164 # description. Set this tag to YES if you prefer the old behaviour instead.
166 MULTILINE_CPP_IS_BRIEF = NO
168 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
169 # member inherits the documentation from any documented member that it
174 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
175 # a new page for each member. If set to NO, the documentation of a member will
176 # be part of the file/class/namespace that contains it.
178 SEPARATE_MEMBER_PAGES = NO
180 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
181 # Doxygen uses this value to replace tabs by spaces in code fragments.
185 # This tag can be used to specify a number of aliases that acts
186 # as commands in the documentation. An alias has the form "name=value".
187 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
188 # put the command \sideeffect (or @sideeffect) in the documentation, which
189 # will result in a user-defined paragraph with heading "Side Effects:".
190 # You can put \n's in the value part of an alias to insert newlines.
194 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
195 # sources only. Doxygen will then generate output that is more tailored for C.
196 # For instance, some of the names that are used will be different. The list
197 # of all members will be omitted, etc.
199 OPTIMIZE_OUTPUT_FOR_C = YES
201 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
202 # sources only. Doxygen will then generate output that is more tailored for
203 # Java. For instance, namespaces will be presented as packages, qualified
204 # scopes will look different, etc.
206 OPTIMIZE_OUTPUT_JAVA = NO
208 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
209 # sources only. Doxygen will then generate output that is more tailored for
212 OPTIMIZE_FOR_FORTRAN = NO
214 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
215 # sources. Doxygen will then generate output that is tailored for
218 OPTIMIZE_OUTPUT_VHDL = NO
220 # Doxygen selects the parser to use depending on the extension of the files it parses.
221 # With this tag you can assign which parser to use for a given extension.
222 # Doxygen has a built-in mapping, but you can override or extend it using this tag.
223 # The format is ext=language, where ext is a file extension, and language is one of
224 # the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
225 # Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
226 # .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
227 # use: inc=Fortran f=C. Note that for custom extensions you also need to set
228 # FILE_PATTERNS otherwise the files are not read by doxygen.
232 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
233 # to include (a tag file for) the STL sources as input, then you should
234 # set this tag to YES in order to let doxygen match functions declarations and
235 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
236 # func(std::string) {}). This also make the inheritance and collaboration
237 # diagrams that involve STL classes more complete and accurate.
239 BUILTIN_STL_SUPPORT = NO
241 # If you use Microsoft's C++/CLI language, you should set this option to YES to
242 # enable parsing support.
246 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
247 # Doxygen will parse them like normal C++ but will assume all classes use public
248 # instead of private inheritance when no explicit protection keyword is present.
252 # For Microsoft's IDL there are propget and propput attributes to indicate getter
253 # and setter methods for a property. Setting this option to YES (the default)
254 # will make doxygen to replace the get and set methods by a property in the
255 # documentation. This will only work if the methods are indeed getting or
256 # setting a simple type. If this is not the case, or you want to show the
257 # methods anyway, you should set this option to NO.
259 IDL_PROPERTY_SUPPORT = YES
261 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
262 # tag is set to YES, then doxygen will reuse the documentation of the first
263 # member in the group (if any) for the other members of the group. By default
264 # all members of a group must be documented explicitly.
266 DISTRIBUTE_GROUP_DOC = NO
268 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
269 # the same type (for instance a group of public functions) to be put as a
270 # subgroup of that type (e.g. under the Public Functions section). Set it to
271 # NO to prevent subgrouping. Alternatively, this can be done per class using
272 # the \nosubgrouping command.
276 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
277 # is documented as struct, union, or enum with the name of the typedef. So
278 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
279 # with name TypeT. When disabled the typedef will appear as a member of a file,
280 # namespace, or class. And the struct will be named TypeS. This can typically
281 # be useful for C code in case the coding convention dictates that all compound
282 # types are typedef'ed and only the typedef is referenced, never the tag name.
284 TYPEDEF_HIDES_STRUCT = NO
286 # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
287 # determine which symbols to keep in memory and which to flush to disk.
288 # When the cache is full, less often used symbols will be written to disk.
289 # For small to medium size projects (<1000 input files) the default value is
290 # probably good enough. For larger projects a too small cache size can cause
291 # doxygen to be busy swapping symbols to and from disk most of the time
292 # causing a significant performance penality.
293 # If the system has enough physical memory increasing the cache will improve the
294 # performance by keeping more symbols in memory. Note that the value works on
295 # a logarithmic scale so increasing the size by one will rougly double the
296 # memory usage. The cache size is given by this formula:
297 # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
298 # corresponding to a cache size of 2^16 = 65536 symbols
300 SYMBOL_CACHE_SIZE = 0
302 #---------------------------------------------------------------------------
303 # Build related configuration options
304 #---------------------------------------------------------------------------
306 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
307 # documentation are documented, even if no documentation was available.
308 # Private class members and static file members will be hidden unless
309 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
313 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
314 # will be included in the documentation.
318 # If the EXTRACT_STATIC tag is set to YES all static members of a file
319 # will be included in the documentation.
323 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
324 # defined locally in source files will be included in the documentation.
325 # If set to NO only classes defined in header files are included.
327 EXTRACT_LOCAL_CLASSES = YES
329 # This flag is only useful for Objective-C code. When set to YES local
330 # methods, which are defined in the implementation section but not in
331 # the interface are included in the documentation.
332 # If set to NO (the default) only methods in the interface are included.
334 EXTRACT_LOCAL_METHODS = NO
336 # If this flag is set to YES, the members of anonymous namespaces will be
337 # extracted and appear in the documentation as a namespace called
338 # 'anonymous_namespace{file}', where file will be replaced with the base
339 # name of the file that contains the anonymous namespace. By default
340 # anonymous namespace are hidden.
342 EXTRACT_ANON_NSPACES = NO
344 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
345 # undocumented members of documented classes, files or namespaces.
346 # If set to NO (the default) these members will be included in the
347 # various overviews, but no documentation section is generated.
348 # This option has no effect if EXTRACT_ALL is enabled.
350 HIDE_UNDOC_MEMBERS = NO
352 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
353 # undocumented classes that are normally visible in the class hierarchy.
354 # If set to NO (the default) these classes will be included in the various
355 # overviews. This option has no effect if EXTRACT_ALL is enabled.
357 HIDE_UNDOC_CLASSES = NO
359 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
360 # friend (class|struct|union) declarations.
361 # If set to NO (the default) these declarations will be included in the
364 HIDE_FRIEND_COMPOUNDS = NO
366 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
367 # documentation blocks found inside the body of a function.
368 # If set to NO (the default) these blocks will be appended to the
369 # function's detailed documentation block.
371 HIDE_IN_BODY_DOCS = NO
373 # The INTERNAL_DOCS tag determines if documentation
374 # that is typed after a \internal command is included. If the tag is set
375 # to NO (the default) then the documentation will be excluded.
376 # Set it to YES to include the internal documentation.
380 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
381 # file names in lower-case letters. If set to YES upper-case letters are also
382 # allowed. This is useful if you have classes or files whose names only differ
383 # in case and if your file system supports case sensitive file names. Windows
384 # and Mac users are advised to set this option to NO.
386 CASE_SENSE_NAMES = NO
388 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
389 # will show members with their full class and namespace scopes in the
390 # documentation. If set to YES the scope will be hidden.
392 HIDE_SCOPE_NAMES = NO
394 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
395 # will put a list of the files that are included by a file in the documentation
398 SHOW_INCLUDE_FILES = YES
400 # If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
401 # will list include files with double quotes in the documentation
402 # rather than with sharp brackets.
404 FORCE_LOCAL_INCLUDES = NO
406 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
407 # is inserted in the documentation for inline members.
411 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
412 # will sort the (detailed) documentation of file and class members
413 # alphabetically by member name. If set to NO the members will appear in
416 SORT_MEMBER_DOCS = YES
418 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
419 # brief documentation of file, namespace and class members alphabetically
420 # by member name. If set to NO (the default) the members will appear in
423 SORT_BRIEF_DOCS = YES
425 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
426 # will sort the (brief and detailed) documentation of class members so that
427 # constructors and destructors are listed first. If set to NO (the default)
428 # the constructors will appear in the respective orders defined by
429 # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
430 # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
431 # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
433 SORT_MEMBERS_CTORS_1ST = NO
435 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
436 # hierarchy of group names into alphabetical order. If set to NO (the default)
437 # the group names will appear in their defined order.
439 SORT_GROUP_NAMES = NO
441 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
442 # sorted by fully-qualified names, including namespaces. If set to
443 # NO (the default), the class list will be sorted only by class name,
444 # not including the namespace part.
445 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
446 # Note: This option applies only to the class list, not to the
449 SORT_BY_SCOPE_NAME = NO
451 # The GENERATE_TODOLIST tag can be used to enable (YES) or
452 # disable (NO) the todo list. This list is created by putting \todo
453 # commands in the documentation.
455 GENERATE_TODOLIST = YES
457 # The GENERATE_TESTLIST tag can be used to enable (YES) or
458 # disable (NO) the test list. This list is created by putting \test
459 # commands in the documentation.
461 GENERATE_TESTLIST = YES
463 # The GENERATE_BUGLIST tag can be used to enable (YES) or
464 # disable (NO) the bug list. This list is created by putting \bug
465 # commands in the documentation.
467 GENERATE_BUGLIST = YES
469 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
470 # disable (NO) the deprecated list. This list is created by putting
471 # \deprecated commands in the documentation.
473 GENERATE_DEPRECATEDLIST= YES
475 # The ENABLED_SECTIONS tag can be used to enable conditional
476 # documentation sections, marked by \if sectionname ... \endif.
480 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
481 # the initial value of a variable or define consists of for it to appear in
482 # the documentation. If the initializer consists of more lines than specified
483 # here it will be hidden. Use a value of 0 to hide initializers completely.
484 # The appearance of the initializer of individual variables and defines in the
485 # documentation can be controlled using \showinitializer or \hideinitializer
486 # command in the documentation regardless of this setting.
488 MAX_INITIALIZER_LINES = 30
490 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
491 # at the bottom of the documentation of classes and structs. If set to YES the
492 # list will mention the files that were used to generate the documentation.
494 SHOW_USED_FILES = YES
496 # If the sources in your project are distributed over multiple directories
497 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
498 # in the documentation. The default is NO.
500 SHOW_DIRECTORIES = YES
502 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
503 # This will remove the Files entry from the Quick Index and from the
504 # Folder Tree View (if specified). The default is YES.
508 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
509 # Namespaces page. This will remove the Namespaces entry from the Quick Index
510 # and from the Folder Tree View (if specified). The default is YES.
512 SHOW_NAMESPACES = YES
514 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
515 # doxygen should invoke to get the current version for each file (typically from
516 # the version control system). Doxygen will invoke the program by executing (via
517 # popen()) the command <command> <input-file>, where <command> is the value of
518 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
519 # provided by doxygen. Whatever the program writes to standard output
520 # is used as the file version. See the manual for examples.
522 FILE_VERSION_FILTER =
524 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
525 # doxygen. The layout file controls the global structure of the generated output files
526 # in an output format independent way. The create the layout file that represents
527 # doxygen's defaults, run doxygen with the -l option. You can optionally specify a
528 # file name after the option, if omitted DoxygenLayout.xml will be used as the name
529 # of the layout file.
533 #---------------------------------------------------------------------------
534 # configuration options related to warning and progress messages
535 #---------------------------------------------------------------------------
537 # The QUIET tag can be used to turn on/off the messages that are generated
538 # by doxygen. Possible values are YES and NO. If left blank NO is used.
542 # The WARNINGS tag can be used to turn on/off the warning messages that are
543 # generated by doxygen. Possible values are YES and NO. If left blank
548 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
549 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
550 # automatically be disabled.
552 WARN_IF_UNDOCUMENTED = YES
554 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
555 # potential errors in the documentation, such as not documenting some
556 # parameters in a documented function, or documenting parameters that
557 # don't exist or using markup commands wrongly.
559 WARN_IF_DOC_ERROR = YES
561 # This WARN_NO_PARAMDOC option can be abled to get warnings for
562 # functions that are documented, but have no documentation for their parameters
563 # or return value. If set to NO (the default) doxygen will only warn about
564 # wrong or incomplete parameter documentation, but not about the absence of
567 WARN_NO_PARAMDOC = NO
569 # The WARN_FORMAT tag determines the format of the warning messages that
570 # doxygen can produce. The string should contain the $file, $line, and $text
571 # tags, which will be replaced by the file and line number from which the
572 # warning originated and the warning text. Optionally the format may contain
573 # $version, which will be replaced by the version of the file (if it could
574 # be obtained via FILE_VERSION_FILTER)
576 WARN_FORMAT = "$file:$line: $text"
578 # The WARN_LOGFILE tag can be used to specify a file to which warning
579 # and error messages should be written. If left blank the output is written
582 WARN_LOGFILE = warn.log
584 #---------------------------------------------------------------------------
585 # configuration options related to the input files
586 #---------------------------------------------------------------------------
588 # The INPUT tag can be used to specify the files and/or directories that contain
589 # documented source files. You may enter file names like "myfile.cpp" or
590 # directories like "/usr/src/myproject". Separate the files or directories
593 INPUT = gc/ogc/card.h \
609 gc/ogc/video_types.h \
616 # This tag can be used to specify the character encoding of the source files
617 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
618 # also the default input encoding. Doxygen uses libiconv (or the iconv built
619 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
620 # the list of possible encodings.
622 INPUT_ENCODING = UTF-8
624 # If the value of the INPUT tag contains directories, you can use the
625 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
626 # and *.h) to filter out the source-files in the directories. If left
627 # blank the following patterns are tested:
628 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
629 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
631 FILE_PATTERNS = *.c \
659 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
660 # should be searched for input files as well. Possible values are YES and NO.
661 # If left blank NO is used.
665 # The EXCLUDE tag can be used to specify files and/or directories that should
666 # excluded from the INPUT source files. This way you can easily exclude a
667 # subdirectory from a directory tree whose root is specified with the INPUT tag.
671 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
672 # directories that are symbolic links (a Unix filesystem feature) are excluded
675 EXCLUDE_SYMLINKS = NO
677 # If the value of the INPUT tag contains directories, you can use the
678 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
679 # certain files from those directories. Note that the wildcards are matched
680 # against the file with absolute path, so to exclude all test directories
681 # for example use the pattern */test/*
685 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
686 # (namespaces, classes, functions, etc.) that should be excluded from the
687 # output. The symbol name can be a fully qualified name, a word, or if the
688 # wildcard * is used, a substring. Examples: ANamespace, AClass,
689 # AClass::ANamespace, ANamespace::*Test
693 # The EXAMPLE_PATH tag can be used to specify one or more files or
694 # directories that contain example code fragments that are included (see
695 # the \include command).
699 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
700 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
701 # and *.h) to filter out the source-files in the directories. If left
702 # blank all files are included.
706 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
707 # searched for input files to be used with the \include or \dontinclude
708 # commands irrespective of the value of the RECURSIVE tag.
709 # Possible values are YES and NO. If left blank NO is used.
711 EXAMPLE_RECURSIVE = NO
713 # The IMAGE_PATH tag can be used to specify one or more files or
714 # directories that contain image that are included in the documentation (see
715 # the \image command).
719 # The INPUT_FILTER tag can be used to specify a program that doxygen should
720 # invoke to filter for each input file. Doxygen will invoke the filter program
721 # by executing (via popen()) the command <filter> <input-file>, where <filter>
722 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
723 # input file. Doxygen will then use the output that the filter program writes
724 # to standard output. If FILTER_PATTERNS is specified, this tag will be
729 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
730 # basis. Doxygen will compare the file name with each pattern and apply the
731 # filter if there is a match. The filters are a list of the form:
732 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
733 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
734 # is applied to all files.
738 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
739 # INPUT_FILTER) will be used to filter the input files when producing source
740 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
742 FILTER_SOURCE_FILES = NO
744 #---------------------------------------------------------------------------
745 # configuration options related to source browsing
746 #---------------------------------------------------------------------------
748 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
749 # be generated. Documented entities will be cross-referenced with these sources.
750 # Note: To get rid of all source code in the generated output, make sure also
751 # VERBATIM_HEADERS is set to NO.
755 # Setting the INLINE_SOURCES tag to YES will include the body
756 # of functions and classes directly in the documentation.
760 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
761 # doxygen to hide any special comment blocks from generated source code
762 # fragments. Normal C and C++ comments will always remain visible.
764 STRIP_CODE_COMMENTS = YES
766 # If the REFERENCED_BY_RELATION tag is set to YES
767 # then for each documented function all documented
768 # functions referencing it will be listed.
770 REFERENCED_BY_RELATION = YES
772 # If the REFERENCES_RELATION tag is set to YES
773 # then for each documented function all documented entities
774 # called/used by that function will be listed.
776 REFERENCES_RELATION = YES
778 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
779 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
780 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
781 # link to the source code. Otherwise they will link to the documentation.
783 REFERENCES_LINK_SOURCE = YES
785 # If the USE_HTAGS tag is set to YES then the references to source code
786 # will point to the HTML generated by the htags(1) tool instead of doxygen
787 # built-in source browser. The htags tool is part of GNU's global source
788 # tagging system (see http://www.gnu.org/software/global/global.html). You
789 # will need version 4.8.6 or higher.
793 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
794 # will generate a verbatim copy of the header file for each class for
795 # which an include is specified. Set to NO to disable this.
797 VERBATIM_HEADERS = NO
799 #---------------------------------------------------------------------------
800 # configuration options related to the alphabetical class index
801 #---------------------------------------------------------------------------
803 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
804 # of all compounds will be generated. Enable this if the project
805 # contains a lot of classes, structs, unions or interfaces.
807 ALPHABETICAL_INDEX = NO
809 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
810 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
811 # in which this list will be split (can be a number in the range [1..20])
813 COLS_IN_ALPHA_INDEX = 5
815 # In case all classes in a project start with a common prefix, all
816 # classes will be put under the same header in the alphabetical index.
817 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
818 # should be ignored while generating the index headers.
822 #---------------------------------------------------------------------------
823 # configuration options related to the HTML output
824 #---------------------------------------------------------------------------
826 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
827 # generate HTML output.
831 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
832 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
833 # put in front of it. If left blank `html' will be used as the default path.
837 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
838 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
839 # doxygen will generate files with .html extension.
841 HTML_FILE_EXTENSION = .html
843 # The HTML_HEADER tag can be used to specify a personal HTML header for
844 # each generated HTML page. If it is left blank doxygen will generate a
849 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
850 # each generated HTML page. If it is left blank doxygen will generate a
855 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
856 # style sheet that is used by each HTML page. It can be used to
857 # fine-tune the look of the HTML output. If the tag is left blank doxygen
858 # will generate a default style sheet. Note that doxygen will try to copy
859 # the style sheet file to the HTML output directory, so don't put your own
860 # stylesheet in the HTML output directory as well, or it will be erased!
864 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
865 # page will contain the date and time when the page was generated. Setting
866 # this to NO can help when comparing the output of multiple runs.
870 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
871 # files or namespaces will be aligned in HTML using tables. If set to
872 # NO a bullet list will be used.
874 HTML_ALIGN_MEMBERS = YES
876 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
877 # documentation will contain sections that can be hidden and shown after the
878 # page has loaded. For this to work a browser that supports
879 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
880 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
882 HTML_DYNAMIC_SECTIONS = NO
884 # If the GENERATE_DOCSET tag is set to YES, additional index files
885 # will be generated that can be used as input for Apple's Xcode 3
886 # integrated development environment, introduced with OSX 10.5 (Leopard).
887 # To create a documentation set, doxygen will generate a Makefile in the
888 # HTML output directory. Running make will produce the docset in that
889 # directory and running "make install" will install the docset in
890 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
892 # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
896 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
897 # feed. A documentation feed provides an umbrella under which multiple
898 # documentation sets from a single provider (such as a company or product suite)
901 DOCSET_FEEDNAME = "Doxygen generated docs"
903 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
904 # should uniquely identify the documentation set bundle. This should be a
905 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
906 # will append .docset to the name.
908 DOCSET_BUNDLE_ID = org.doxygen.Project
910 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
911 # will be generated that can be used as input for tools like the
912 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
913 # of the generated HTML documentation.
915 GENERATE_HTMLHELP = NO
917 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
918 # be used to specify the file name of the resulting .chm file. You
919 # can add a path in front of the file if the result should not be
920 # written to the html output directory.
924 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
925 # be used to specify the location (absolute path including file name) of
926 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
927 # the HTML help compiler on the generated index.hhp.
931 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
932 # controls if a separate .chi index file is generated (YES) or that
933 # it should be included in the master .chm file (NO).
937 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
938 # is used to encode HtmlHelp index (hhk), content (hhc) and project file
943 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
944 # controls whether a binary table of contents is generated (YES) or a
945 # normal table of contents (NO) in the .chm file.
949 # The TOC_EXPAND flag can be set to YES to add extra items for group members
950 # to the contents of the HTML help documentation and to the tree view.
954 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
955 # are set, an additional index file will be generated that can be used as input for
956 # Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
957 # HTML documentation.
961 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
962 # be used to specify the file name of the resulting .qch file.
963 # The path specified is relative to the HTML output folder.
967 # The QHP_NAMESPACE tag specifies the namespace to use when generating
968 # Qt Help Project output. For more information please see
969 # http://doc.trolltech.com/qthelpproject.html#namespace
971 QHP_NAMESPACE = org.doxygen.Project
973 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
974 # Qt Help Project output. For more information please see
975 # http://doc.trolltech.com/qthelpproject.html#virtual-folders
977 QHP_VIRTUAL_FOLDER = doc
979 # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
980 # For more information please see
981 # http://doc.trolltech.com/qthelpproject.html#custom-filters
983 QHP_CUST_FILTER_NAME =
985 # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
986 # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
988 QHP_CUST_FILTER_ATTRS =
990 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
991 # filter section matches.
992 # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
994 QHP_SECT_FILTER_ATTRS =
996 # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
997 # be used to specify the location of Qt's qhelpgenerator.
998 # If non-empty doxygen will try to run qhelpgenerator on the generated
1003 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
1004 # will be generated, which together with the HTML files, form an Eclipse help
1005 # plugin. To install this plugin and make it available under the help contents
1006 # menu in Eclipse, the contents of the directory containing the HTML and XML
1007 # files needs to be copied into the plugins directory of eclipse. The name of
1008 # the directory within the plugins directory should be the same as
1009 # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1012 GENERATE_ECLIPSEHELP = NO
1014 # A unique identifier for the eclipse help plugin. When installing the plugin
1015 # the directory name containing the HTML and XML files should also have
1018 ECLIPSE_DOC_ID = org.doxygen.Project
1020 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
1021 # top of each HTML page. The value NO (the default) enables the index and
1022 # the value YES disables it.
1026 # This tag can be used to set the number of enum values (range [1..20])
1027 # that doxygen will group on one line in the generated HTML documentation.
1029 ENUM_VALUES_PER_LINE = 1
1031 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1032 # structure should be generated to display hierarchical information.
1033 # If the tag value is set to YES, a side panel will be generated
1034 # containing a tree-like index structure (just like the one that
1035 # is generated for HTML Help). For this to work a browser that supports
1036 # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1037 # Windows users are probably better off using the HTML help feature.
1039 GENERATE_TREEVIEW = NO
1041 # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
1042 # and Class Hierarchy pages using a tree view instead of an ordered list.
1044 USE_INLINE_TREES = NO
1046 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1047 # used to set the initial width (in pixels) of the frame in which the tree
1050 TREEVIEW_WIDTH = 250
1052 # Use this tag to change the font size of Latex formulas included
1053 # as images in the HTML documentation. The default is 10. Note that
1054 # when you change the font size after a successful doxygen run you need
1055 # to manually remove any form_*.png images from the HTML output directory
1056 # to force them to be regenerated.
1058 FORMULA_FONTSIZE = 10
1060 # When the SEARCHENGINE tag is enabled doxygen will generate a search box
1061 # for the HTML output. The underlying search engine uses javascript
1062 # and DHTML and should work on any modern browser. Note that when using
1063 # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1064 # (GENERATE_DOCSET) there is already a search function so this one should
1065 # typically be disabled. For large projects the javascript based search engine
1066 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1070 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1071 # implemented using a PHP enabled web server instead of at the web client
1072 # using Javascript. Doxygen will generate the search PHP script and index
1073 # file to put on the web server. The advantage of the server
1074 # based approach is that it scales better to large projects and allows
1075 # full text search. The disadvances is that it is more difficult to setup
1076 # and does not have live searching capabilities.
1078 SERVER_BASED_SEARCH = NO
1080 #---------------------------------------------------------------------------
1081 # configuration options related to the LaTeX output
1082 #---------------------------------------------------------------------------
1084 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1085 # generate Latex output.
1089 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1090 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1091 # put in front of it. If left blank `latex' will be used as the default path.
1093 LATEX_OUTPUT = latex
1095 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1096 # invoked. If left blank `latex' will be used as the default command name.
1097 # Note that when enabling USE_PDFLATEX this option is only used for
1098 # generating bitmaps for formulas in the HTML output, but not in the
1099 # Makefile that is written to the output directory.
1101 LATEX_CMD_NAME = latex
1103 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1104 # generate index for LaTeX. If left blank `makeindex' will be used as the
1105 # default command name.
1107 MAKEINDEX_CMD_NAME = makeindex
1109 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1110 # LaTeX documents. This may be useful for small projects and may help to
1111 # save some trees in general.
1115 # The PAPER_TYPE tag can be used to set the paper type that is used
1116 # by the printer. Possible values are: a4, a4wide, letter, legal and
1117 # executive. If left blank a4wide will be used.
1121 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1122 # packages that should be included in the LaTeX output.
1126 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1127 # the generated latex document. The header should contain everything until
1128 # the first chapter. If it is left blank doxygen will generate a
1129 # standard header. Notice: only use this tag if you know what you are doing!
1133 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1134 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
1135 # contain links (just like the HTML output) instead of page references
1136 # This makes the output suitable for online browsing using a pdf viewer.
1140 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1141 # plain latex in the generated Makefile. Set this option to YES to get a
1142 # higher quality PDF documentation.
1146 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1147 # command to the generated LaTeX files. This will instruct LaTeX to keep
1148 # running if errors occur, instead of asking the user for help.
1149 # This option is also used when generating formulas in HTML.
1151 LATEX_BATCHMODE = NO
1153 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
1154 # include the index chapters (such as File Index, Compound Index, etc.)
1157 LATEX_HIDE_INDICES = NO
1159 # If LATEX_SOURCE_CODE is set to YES then doxygen will include
1160 # source code with syntax highlighting in the LaTeX output.
1161 # Note that which sources are shown also depends on other settings
1162 # such as SOURCE_BROWSER.
1164 LATEX_SOURCE_CODE = NO
1166 #---------------------------------------------------------------------------
1167 # configuration options related to the RTF output
1168 #---------------------------------------------------------------------------
1170 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1171 # The RTF output is optimized for Word 97 and may not look very pretty with
1172 # other RTF readers or editors.
1176 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1177 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1178 # put in front of it. If left blank `rtf' will be used as the default path.
1182 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1183 # RTF documents. This may be useful for small projects and may help to
1184 # save some trees in general.
1188 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1189 # will contain hyperlink fields. The RTF file will
1190 # contain links (just like the HTML output) instead of page references.
1191 # This makes the output suitable for online browsing using WORD or other
1192 # programs which support those fields.
1193 # Note: wordpad (write) and others do not support links.
1197 # Load stylesheet definitions from file. Syntax is similar to doxygen's
1198 # config file, i.e. a series of assignments. You only have to provide
1199 # replacements, missing definitions are set to their default value.
1201 RTF_STYLESHEET_FILE =
1203 # Set optional variables used in the generation of an rtf document.
1204 # Syntax is similar to doxygen's config file.
1206 RTF_EXTENSIONS_FILE =
1208 #---------------------------------------------------------------------------
1209 # configuration options related to the man page output
1210 #---------------------------------------------------------------------------
1212 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1213 # generate man pages
1217 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
1218 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1219 # put in front of it. If left blank `man' will be used as the default path.
1223 # The MAN_EXTENSION tag determines the extension that is added to
1224 # the generated man pages (default is the subroutine's section .3)
1228 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1229 # then it will generate one additional man file for each entity
1230 # documented in the real man page(s). These additional files
1231 # only source the real man page, but without them the man command
1232 # would be unable to find the correct page. The default is NO.
1236 #---------------------------------------------------------------------------
1237 # configuration options related to the XML output
1238 #---------------------------------------------------------------------------
1240 # If the GENERATE_XML tag is set to YES Doxygen will
1241 # generate an XML file that captures the structure of
1242 # the code including all documentation.
1246 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
1247 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1248 # put in front of it. If left blank `xml' will be used as the default path.
1252 # The XML_SCHEMA tag can be used to specify an XML schema,
1253 # which can be used by a validating XML parser to check the
1254 # syntax of the XML files.
1258 # The XML_DTD tag can be used to specify an XML DTD,
1259 # which can be used by a validating XML parser to check the
1260 # syntax of the XML files.
1264 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1265 # dump the program listings (including syntax highlighting
1266 # and cross-referencing information) to the XML output. Note that
1267 # enabling this will significantly increase the size of the XML output.
1269 XML_PROGRAMLISTING = YES
1271 #---------------------------------------------------------------------------
1272 # configuration options for the AutoGen Definitions output
1273 #---------------------------------------------------------------------------
1275 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1276 # generate an AutoGen Definitions (see autogen.sf.net) file
1277 # that captures the structure of the code including all
1278 # documentation. Note that this feature is still experimental
1279 # and incomplete at the moment.
1281 GENERATE_AUTOGEN_DEF = NO
1283 #---------------------------------------------------------------------------
1284 # configuration options related to the Perl module output
1285 #---------------------------------------------------------------------------
1287 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
1288 # generate a Perl module file that captures the structure of
1289 # the code including all documentation. Note that this
1290 # feature is still experimental and incomplete at the
1293 GENERATE_PERLMOD = NO
1295 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1296 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
1297 # to generate PDF and DVI output from the Perl module output.
1301 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1302 # nicely formatted so it can be parsed by a human reader. This is useful
1303 # if you want to understand what is going on. On the other hand, if this
1304 # tag is set to NO the size of the Perl module output will be much smaller
1305 # and Perl will parse it just the same.
1307 PERLMOD_PRETTY = YES
1309 # The names of the make variables in the generated doxyrules.make file
1310 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1311 # This is useful so different doxyrules.make files included by the same
1312 # Makefile don't overwrite each other's variables.
1314 PERLMOD_MAKEVAR_PREFIX =
1316 #---------------------------------------------------------------------------
1317 # Configuration options related to the preprocessor
1318 #---------------------------------------------------------------------------
1320 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1321 # evaluate all C-preprocessor directives found in the sources and include
1324 ENABLE_PREPROCESSING = YES
1326 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1327 # names in the source code. If set to NO (the default) only conditional
1328 # compilation will be performed. Macro expansion can be done in a controlled
1329 # way by setting EXPAND_ONLY_PREDEF to YES.
1331 MACRO_EXPANSION = YES
1333 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1334 # then the macro expansion is limited to the macros specified with the
1335 # PREDEFINED and EXPAND_AS_DEFINED tags.
1337 EXPAND_ONLY_PREDEF = NO
1339 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1340 # in the INCLUDE_PATH (see below) will be search if a #include is found.
1342 SEARCH_INCLUDES = YES
1344 # The INCLUDE_PATH tag can be used to specify one or more directories that
1345 # contain include files that are not input files but should be processed by
1350 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1351 # patterns (like *.h and *.hpp) to filter out the header-files in the
1352 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1355 INCLUDE_FILE_PATTERNS =
1357 # The PREDEFINED tag can be used to specify one or more macro names that
1358 # are defined before the preprocessor is started (similar to the -D option of
1359 # gcc). The argument of the tag is a list of macros of the form: name
1360 # or name=definition (no spaces). If the definition and the = are
1361 # omitted =1 is assumed. To prevent a macro definition from being
1362 # undefined via #undef or recursively expanded use the := operator
1363 # instead of the = operator.
1367 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1368 # this tag can be used to specify a list of macro names that should be expanded.
1369 # The macro definition that is found in the sources will be used.
1370 # Use the PREDEFINED tag if you want to use a different macro definition.
1374 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1375 # doxygen's preprocessor will remove all function-like macros that are alone
1376 # on a line, have an all uppercase name, and do not end with a semicolon. Such
1377 # function macros are typically used for boiler-plate code, and will confuse
1378 # the parser if not removed.
1380 SKIP_FUNCTION_MACROS = YES
1382 #---------------------------------------------------------------------------
1383 # Configuration::additions related to external references
1384 #---------------------------------------------------------------------------
1386 # The TAGFILES option can be used to specify one or more tagfiles.
1387 # Optionally an initial location of the external documentation
1388 # can be added for each tagfile. The format of a tag file without
1389 # this location is as follows:
1390 # TAGFILES = file1 file2 ...
1391 # Adding location for the tag files is done as follows:
1392 # TAGFILES = file1=loc1 "file2 = loc2" ...
1393 # where "loc1" and "loc2" can be relative or absolute paths or
1394 # URLs. If a location is present for each tag, the installdox tool
1395 # does not have to be run to correct the links.
1396 # Note that each tag file must have a unique name
1397 # (where the name does NOT include the path)
1398 # If a tag file is not located in the directory in which doxygen
1399 # is run, you must also specify the path to the tagfile here.
1403 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1404 # a tag file that is based on the input files it reads.
1408 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1409 # in the class index. If set to NO only the inherited external classes
1414 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1415 # in the modules index. If set to NO, only the current project's groups will
1418 EXTERNAL_GROUPS = YES
1420 # The PERL_PATH should be the absolute path and name of the perl script
1421 # interpreter (i.e. the result of `which perl').
1423 PERL_PATH = /usr/bin/perl
1425 #---------------------------------------------------------------------------
1426 # Configuration options related to the dot tool
1427 #---------------------------------------------------------------------------
1429 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1430 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1431 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1432 # this option is superseded by the HAVE_DOT option below. This is only a
1433 # fallback. It is recommended to install and use dot, since it yields more
1436 CLASS_DIAGRAMS = YES
1438 # You can define message sequence charts within doxygen comments using the \msc
1439 # command. Doxygen will then run the mscgen tool (see
1440 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1441 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
1442 # the mscgen tool resides. If left empty the tool is assumed to be found in the
1443 # default search path.
1447 # If set to YES, the inheritance and collaboration graphs will hide
1448 # inheritance and usage relations if the target is undocumented
1449 # or is not a class.
1451 HIDE_UNDOC_RELATIONS = YES
1453 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1454 # available from the path. This tool is part of Graphviz, a graph visualization
1455 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1456 # have no effect if this option is set to NO (the default)
1460 # By default doxygen will write a font called FreeSans.ttf to the output
1461 # directory and reference it in all dot files that doxygen generates. This
1462 # font does not include all possible unicode characters however, so when you need
1463 # these (or just want a differently looking font) you can specify the font name
1464 # using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1465 # which can be done by putting it in a standard location or by setting the
1466 # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1467 # containing the font.
1469 DOT_FONTNAME = FreeSans
1471 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1472 # The default size is 10pt.
1476 # By default doxygen will tell dot to use the output directory to look for the
1477 # FreeSans.ttf font (which doxygen will put there itself). If you specify a
1478 # different font using DOT_FONTNAME you can set the path where dot
1479 # can find it using this tag.
1483 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1484 # will generate a graph for each documented class showing the direct and
1485 # indirect inheritance relations. Setting this tag to YES will force the
1486 # the CLASS_DIAGRAMS tag to NO.
1490 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1491 # will generate a graph for each documented class showing the direct and
1492 # indirect implementation dependencies (inheritance, containment, and
1493 # class references variables) of the class with other documented classes.
1495 COLLABORATION_GRAPH = YES
1497 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1498 # will generate a graph for groups, showing the direct groups dependencies
1502 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1503 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1508 # If set to YES, the inheritance and collaboration graphs will show the
1509 # relations between templates and their instances.
1511 TEMPLATE_RELATIONS = NO
1513 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1514 # tags are set to YES then doxygen will generate a graph for each documented
1515 # file showing the direct and indirect include dependencies of the file with
1516 # other documented files.
1520 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1521 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1522 # documented header file showing the documented files that directly or
1523 # indirectly include this file.
1525 INCLUDED_BY_GRAPH = YES
1527 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
1528 # doxygen will generate a call dependency graph for every global function
1529 # or class method. Note that enabling this option will significantly increase
1530 # the time of a run. So in most cases it will be better to enable call graphs
1531 # for selected functions only using the \callgraph command.
1535 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1536 # doxygen will generate a caller dependency graph for every global function
1537 # or class method. Note that enabling this option will significantly increase
1538 # the time of a run. So in most cases it will be better to enable caller
1539 # graphs for selected functions only using the \callergraph command.
1543 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1544 # will graphical hierarchy of all classes instead of a textual one.
1546 GRAPHICAL_HIERARCHY = YES
1548 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1549 # then doxygen will show the dependencies a directory has on other directories
1550 # in a graphical way. The dependency relations are determined by the #include
1551 # relations between the files in the directories.
1553 DIRECTORY_GRAPH = YES
1555 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1556 # generated by dot. Possible values are png, jpg, or gif
1557 # If left blank png will be used.
1559 DOT_IMAGE_FORMAT = png
1561 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1562 # found. If left blank, it is assumed the dot tool can be found in the path.
1566 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1567 # contain dot files that are included in the documentation (see the
1568 # \dotfile command).
1572 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1573 # nodes that will be shown in the graph. If the number of nodes in a graph
1574 # becomes larger than this value, doxygen will truncate the graph, which is
1575 # visualized by representing a node as a red box. Note that doxygen if the
1576 # number of direct children of the root node in a graph is already larger than
1577 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1578 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1580 DOT_GRAPH_MAX_NODES = 50
1582 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1583 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1584 # from the root by following a path via at most 3 edges will be shown. Nodes
1585 # that lay further from the root node will be omitted. Note that setting this
1586 # option to 1 or 2 may greatly reduce the computation time needed for large
1587 # code bases. Also note that the size of a graph can be further restricted by
1588 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1590 MAX_DOT_GRAPH_DEPTH = 1000
1592 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1593 # background. This is disabled by default, because dot on Windows does not
1594 # seem to support this out of the box. Warning: Depending on the platform used,
1595 # enabling this option may lead to badly anti-aliased labels on the edges of
1596 # a graph (i.e. they become hard to read).
1598 DOT_TRANSPARENT = NO
1600 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1601 # files in one run (i.e. multiple -o and -T options on the command line). This
1602 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1603 # support this, this feature is disabled by default.
1605 DOT_MULTI_TARGETS = NO
1607 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1608 # generate a legend page explaining the meaning of the various boxes and
1609 # arrows in the dot generated graphs.
1611 GENERATE_LEGEND = YES
1613 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1614 # remove the intermediate dot files that are used to generate
1615 # the various graphs.