1 # Copyright 2007 MJ Ray
3 # This file is part of Koha.
5 # Koha is free software; you can redistribute it and/or modify it under the
6 # terms of the GNU General Public License as published by the Free Software
7 # Foundation; either version 2 of the License, or (at your option) any later
10 # Koha is distributed in the hope that it will be useful, but WITHOUT ANY
11 # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12 # A PARTICULAR PURPOSE. See the GNU General Public License for more details.
14 # You should have received a copy of the GNU General Public License along with
15 # Koha; if not, write to the Free Software Foundation, Inc., 59 Temple Place,
16 # Suite 330, Boston, MA 02111-1307 USA
18 # Current maintainer MJR http://mjr.towers.org.uk/
19 # See http://www.koha.org/wiki/?page=KohaInstaller
24 use ExtUtils::MakeMaker;
29 die "perl 5.6.1 or later required" unless ($] >= 5.006001);
31 # Hash up directory structure & files beginning with the directory we were called from (should be the base of koha)...
33 my $dirtree = hashdir('.');
38 Makefile.PL - Koha packager and installer
42 =head2 BASIC INSTALLATION
48 =head2 PACKAGING RELEASE TARBALLS
59 This is a packager and installer that uses
60 ExtUtils::MakeMaker, which is fairly common
62 As well as building tar or zip files
63 and installing with the above commands,
64 it allows us to check pre-requisites
65 and generate configuration files.
69 =head2 NAME, VERSION_FROM, ABSTRACT, AUTHOR
71 Basic metadata about this software.
75 Suppress generation of META.yml file.
79 Hash of perl modules and versions required.
87 This is a hash of PL scripts to run after installation and
88 the files to ask them to generate.
89 Maybe use the values from CONFIGURE
90 to generate initial configuration files in future.
96 This is a hash mapping directories and files in the
97 source tree to installation target directories. The rules
102 =item If a directory or file is specified, it and its
103 contents will be copied to the installation target directory.
105 =item If a subdirectory of a mapped directory is specified,
106 its target overrides the parent's target for that subdirectory.
108 =item The value of each map entry may either be a scalar containing
109 one target or a reference to a hash containing 'target' and 'trimdir'
112 =item Any files at the top level of the source tree that are
113 not included in the map will not be installed.
115 =item Any directories at the top level of the source tree
116 that are not included in the map will be installed in
117 INTRANET_CGI_DIR. This is a sensible default given the
118 current organization of the source tree, but (FIXME) it
119 would be better to reorganize the source tree to better
120 match the installation system, to allow adding new directories
121 without having to adjust Makefile.PL each time. The idea
122 is to make the C<$target_map> hash as minimal as possible.
126 The permitted installation targets are:
130 =item INTRANET_CGI_DIR
132 CGI scripts for intranet (staff) interface.
134 =item INTRANET_TMPL_DIR
136 HTML templates for the intranet interface.
138 =item INTRANET_WWW_DIR
140 HTML files, images, etc. for DocumentRoot for the intranet interface.
144 CGI scripts for OPAC (public) interface.
148 HTML templates for the OPAC interface.
152 HTML files, images, etc. for DocumentRoot for the OPAC interface.
154 =item PERL_MODULE_DIR
156 Perl modules (at present just the C4 modules) that are intimately
157 tied to Koha. Depending on the installation options, these
158 may or may not be installed one of the standard directories
159 in Perl's default @LIB.
163 Directory for Koha configuration files.
167 Directory for Zebra configuration files.
171 Directory for Zebra's lock files.
175 Directory for Zebra's data files.
179 Directory for Zebra's UNIX-domain sockets.
183 Directory for for miscellaenous scripts, among other
184 things the translation toolkit and RSS feed tools.
188 Directory for command-line scripts and daemons.
192 Directory for man pages created from POD -- will mostly
193 contain information of interest to Koha developers.
197 Directory for Koha documentation accessed from the
198 command-line, e.g., READMEs.
202 Directory for Apache and Zebra logs produced by Koha.
206 This is a dummy target used to explicitly state
207 that a given file or directory is not to be installed.
208 This is used either for parts of the installer itself
209 or for development tools that are not applicable to a
210 production installation.
217 './about.pl' => 'INTRANET_CGI_DIR',
218 './acqui' => 'INTRANET_CGI_DIR',
219 './admin' => 'INTRANET_CGI_DIR',
220 './authorities' => 'INTRANET_CGI_DIR',
221 './C4' => 'PERL_MODULE_DIR',
222 './C4/SIP/t' => 'NONE',
223 './C4/SIP/koha_test' => 'NONE',
224 './C4/tests' => 'NONE',
225 './catalogue' => 'INTRANET_CGI_DIR',
226 './cataloguing' => 'INTRANET_CGI_DIR',
227 './changelanguage.pl' => 'INTRANET_CGI_DIR',
228 './check_sysprefs.pl' => 'NONE',
229 './circ' => 'INTRANET_CGI_DIR',
230 './edithelp.pl' => 'INTRANET_CGI_DIR',
231 './etc' => { target => 'KOHA_CONF_DIR', trimdir => -1 },
232 './etc/zebradb' => { target => 'ZEBRA_CONF_DIR', trimdir => -1 },
233 './help.pl' => 'INTRANET_CGI_DIR',
234 './installer-CPAN.pl' => 'NONE',
235 './installer' => 'INTRANET_CGI_DIR',
236 './koha-tmpl/errors' => {target => 'INTRANET_CGI_DIR', trimdir => 2},
237 './koha-tmpl/intranet-tmpl' => {target => 'INTRANET_TMPL_DIR', trimdir => -1},
238 './koha-tmpl/opac-tmpl' => {target => 'OPAC_TMPL_DIR', trimdir => -1},
239 './kohaversion.pl' => 'INTRANET_CGI_DIR',
240 './labels' => 'INTRANET_CGI_DIR',
241 './mainpage.pl' => 'INTRANET_CGI_DIR',
242 './Makefile.PL' => 'NONE',
243 './MANIFEST.SKIP' => 'NONE',
244 './members' => 'INTRANET_CGI_DIR',
245 './misc' => { target => 'SCRIPT_DIR', trimdir => -1 },
246 './misc/bin' => { target => 'SCRIPT_DIR', trimdir => -1 },
247 './misc/release_notes' => { target => 'DOC_DIR', trimdir => 2 },
248 './misc/translator' => { target => 'MISC_DIR', trimdir => 2 },
249 './misc/installer_devel_notes' => 'NONE',
250 './opac' => 'OPAC_CGI_DIR',
251 './README.txt' => 'NONE',
252 './reports' => 'INTRANET_CGI_DIR',
253 './reserve' => 'INTRANET_CGI_DIR',
254 './reviews' => 'INTRANET_CGI_DIR',
255 './rewrite-config.PL' => 'NONE',
256 './reviews' => 'INTRANET_CGI_DIR',
257 './rss' => 'MISC_DIR',
258 './serials' => 'INTRANET_CGI_DIR',
260 './skel/var/log/koha' => { target => 'LOG_DIR', trimdir => -1 },
261 './skel/var/run/koha/zebradb' => { target => 'ZEBRA_RUN_DIR', trimdir => -1 },
262 './skel/var/lock/koha/zebradb/authorities' => { target => 'ZEBRA_LOCK_DIR', trimdir => 6 },
263 './skel/var/lib/koha/zebradb/authorities/key' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
264 './skel/var/lib/koha/zebradb/authorities/register' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
265 './skel/var/lib/koha/zebradb/authorities/shadow' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
266 './skel/var/lib/koha/zebradb/authorities/tmp' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
267 './skel/var/lock/koha/zebradb/biblios' => { target => 'ZEBRA_LOCK_DIR', trimdir => 6 },
268 './skel/var/lib/koha/zebradb/biblios/key' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
269 './skel/var/lib/koha/zebradb/biblios/register' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
270 './skel/var/lib/koha/zebradb/biblios/shadow' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
271 './skel/var/lib/koha/zebradb/biblios/tmp' => { target => 'ZEBRA_DATA_DIR', trimdir => 6 },
272 './sms' => 'INTRANET_CGI_DIR',
273 './suggestion' => 'INTRANET_CGI_DIR',
274 './svc' => 'INTRANET_CGI_DIR',
276 './tmp' => 'NONE', # FIXME need to determine whether
277 # Koha generates any persistent temp files
278 # that should go in /var/tmp/koha
279 './tools' => 'INTRANET_CGI_DIR',
280 './virtualshelves' => 'INTRANET_CGI_DIR',
281 # ignore files and directories created by the install itself
282 './pm_to_blib' => 'NONE',
286 =head1 CONFIGURATION OPTIONS
288 The following configuration options are used by the installer.
294 Specifies whether installation will be FHS-compliant (default,
295 assumes user has root), put everything under
296 a single directory (for users installing on a web host
297 that allows CGI scripts and a MySQL database but not root
298 access), or development (for a developer who wants to run
299 Koha from a git clone with no fuss).
303 Directory under which most components will go. Default
304 value will vary depending on INSTALL_MODE.
308 Type of DBMS (e.g., mysql or Pg).
316 Port that DBMS server is listening on.
320 Name of the DBMS database for Koha.
324 Name of DBMS user account for Koha's database.
328 Pasword of DMBS user account for Koha's database.
332 Whether to install Zebra configuration files and data
335 =item ZEBRA_MARC_FORMAT
337 Specifies format of MARC records to be indexed by Zebra.
341 Specifies primary language of records that will be
346 Internal Zebra user account for the index.
350 Internal Zebra user account's password.
354 System user account that will own Koha's files.
358 System group that will own Koha's files.
364 # default configuration options
365 my %config_defaults = (
366 'DB_TYPE' => 'mysql',
367 'DB_HOST' => 'localhost',
369 'DB_USER' => 'kohaadmin',
370 'DB_PASS' => 'katikoan',
371 'INSTALL_ZEBRA' => 'yes',
372 'INSTALL_SRU' => 'yes',
373 'AUTH_INDEX_MODE' => 'grs1',
374 'ZEBRA_MARC_FORMAT' => 'marc21',
375 'ZEBRA_LANGUAGE' => 'en',
376 'ZEBRA_USER' => 'kohauser',
377 'ZEBRA_PASS' => 'zebrastripes',
378 'ZEBRA_SRU_HOST' => 'localhost',
379 'ZEBRA_SRU_BIBLIOS_PORT' => '9998',
380 'ZEBRA_SRU_AUTHORITIES_PORT' => '9999',
381 'KOHA_USER' => 'koha',
382 'KOHA_GROUP' => 'koha',
385 # set some default configuratio options based on OS
386 # more conditions need to be added for other OS's
387 # this should probably also incorporate usage of Win32::GetOSName() and/or Win32::GetOSVersion()
388 # to allow for more granular decisions based on which Win32 platform
390 warn "Your platform appears to be $^O.\n" if $DEBUG;
392 if ( $^O eq 'MSWin32' ) {
393 # Most Unix2Win32 ports seem to poke everything into the Program Files directory
394 # this could be changed to put some files (ie. libraries) into system32, etc.
395 $config_defaults{'INSTALL_MODE'} = 'single';
396 $config_defaults{'INSTALL_BASE'} = 'c:/progra~1/koha'; # Use 8.3 names to be safe...
398 elsif ( $^O eq 'cygwin' ) {
399 # Most Unix2Win32 ports seem to poke everything into the Program Files directory
400 # this could be changed to put some files (ie. libraries) into system32, etc.
401 $config_defaults{'INSTALL_MODE'} = 'single';
402 $config_defaults{'INSTALL_BASE'} = 'c:/progra~1/koha'; # Use 8.3 names to be safe...
405 $config_defaults{'INSTALL_MODE'} = 'standard';
406 $config_defaults{'INSTALL_BASE'} = '/usr/share/koha';
409 # valid values for certain configuration options
410 my %valid_config_values = (
411 'INSTALL_MODE' => { 'standard' => 1, 'single' => 1, 'dev' => 1 },
412 'DB_TYPE' => { 'mysql' => 1, 'Pg' => 1 },
413 'INSTALL_ZEBRA' => { 'yes' => 1, 'no' => 1 },
414 'INSTALL_SRU' => { 'yes' => 1, 'no' => 1 },
415 'AUTH_INDEX_MODE' => { 'grs1' => 1, 'dom' => 1 },
416 'ZEBRA_MARC_FORMAT' => { 'marc21' => 1, 'unimarc' => 1 }, # FIXME should generate from contents of distributation
417 'ZEBRA_LANGUAGE' => { 'en' => 1, 'fr' => 1 }, # FIXME should generate from contents of distribution
420 my %config = get_configuration(\%config_defaults, \%valid_config_values);
421 my ($target_directories, $skip_directories) = get_target_directories(\%config);
422 display_configuration(\%config, $target_directories);
424 get_file_map($target_map, $dirtree, $file_map, $config{'INSTALL_ZEBRA'} eq "yes" ? 1: 0);
427 'rewrite-config.PL' => [
428 'blib/KOHA_CONF_DIR/koha-conf.xml',
429 'blib/KOHA_CONF_DIR/koha-httpd.conf'
431 'fix-perl-path.PL' => [ # this script ensures the correct shebang line for the platform installed on...
436 if ($config{'INSTALL_ZEBRA'} eq "yes") {
437 push @{ $pl_files->{'rewrite-config.PL'} }, (
438 'blib/ZEBRA_CONF_DIR/etc/passwd',
439 'blib/ZEBRA_CONF_DIR/zebra-biblios.cfg',
440 'blib/ZEBRA_CONF_DIR/zebra-authorities.cfg',
441 'blib/ZEBRA_CONF_DIR/zebra-authorities-dom.cfg',
442 'blib/ZEBRA_CONF_DIR/explain-authorities.xml',
443 'blib/ZEBRA_CONF_DIR/explain-biblios.xml',
444 'blib/ZEBRA_CONF_DIR/retrieval-info-auth-grs1.xml',
445 'blib/ZEBRA_CONF_DIR/retrieval-info-auth-dom.xml',
447 if ($config{'INSTALL_MODE'} ne 'dev') {
448 push @{ $pl_files->{'rewrite-config.PL'} }, (
449 'blib/SCRIPT_DIR/koha-zebra-ctl.sh',
450 'blib/SCRIPT_DIR/koha-zebraqueue-ctl.sh',
453 $config{'ZEBRA_AUTH_CFG'} = $config{'AUTH_INDEX_MODE'} eq 'dom' ? 'zebra-authorities-dom.cfg' : 'zebra-authorities.cfg';
454 $config{'AUTH_RETRIEVAL_CFG'} =
455 $config{'AUTH_INDEX_MODE'} eq 'dom' ? 'retrieval-info-auth-dom.xml' : 'retrieval-info-auth-grs1.xml';
458 if ($config{'INSTALL_MODE'} ne "dev") {
459 push @{ $pl_files->{'rewrite-config.PL'} }, (
460 'blib/PERL_MODULE_DIR/C4/Context.pm',
461 'blib/SCRIPT_DIR/kohalib.pl'
467 #VERSION => strftime('2.9.%Y%m%d%H',gmtime),
468 VERSION_FROM => 'kohaversion.pl',
469 ABSTRACT => 'Award-winning integrated library system (ILS) and Web OPAC',
470 AUTHOR => 'Koha Developers <koha-devel@nongnu.org>',
473 # awaiting package maintainer's use of $VERSION
474 #'Algorithm::CheckDigits' => 0.48,
475 #'Algorithm::CheckDigits::M43_001' => 0.48,
476 'Biblio::EndnoteStyle' => 0.05,
479 'CGI::Session' => '4.10',
480 'Class::Factory::Util' => 1.6,
481 'Class::Accessor' => 0.30,
482 'DBD::mysql' => 4.004,
484 'Data::ICal' => 0.13,
485 'Data::Dumper' => 2.121_08,
487 'Date::ICal' => 1.72,
488 'Date::Manip' => 5.44,
489 'Digest::MD5' => 2.36,
490 'File::Temp' => 0.16,
491 'GD::Barcode::UPCE' => 1.1,
492 'Getopt::Long' => 2.35,
493 'Getopt::Std' => 1.05,
494 'HTML::Template::Pro' => 0.65,
495 'HTTP::Cookies' => 1.39,
496 'HTTP::Request::Common' => 1.26,
497 'LWP::Simple' => 1.41,
498 'LWP::UserAgent' => 2.033,
499 'Lingua::Stem' => 0.82,
500 'List::Util' => 1.18,
501 'List::MoreUtils' => 0.21,
502 'Locale::Language' => 2.07,
503 'MARC::Charset' => 0.98,
504 'MARC::Crosswalk::DublinCore' => 0.02,
505 'MARC::File::XML' => 0.88,
506 'MARC::Record' => 2.00,
507 'MIME::Base64' => 3.07,
508 'MIME::QuotedPrint' => 3.07,
509 'Mail::Sendmail' => 0.79,
511 'Net::LDAP::Filter' => 0.14,
512 'Net::Z3950::ZOOM' => 1.16,
513 'PDF::API2' => 2.000,
514 'PDF::API2::Page' => 2.000,
515 'PDF::API2::Util' => 2.000,
516 'PDF::Reuse' => 0.33,
517 'PDF::Reuse::Barcode' => 0.05,
520 'Schedule::At' => 1.06,
521 'Term::ANSIColor' => 1.10,
523 'Test::Harness' => 2.56,
524 'Test::More' => 0.62,
526 'Text::CSV_XS' => 0.32,
527 'Text::Iconv' => 1.7,
528 'Text::Wrap' => 2005.082401,
529 'Time::HiRes' => 1.86,
530 'Time::localtime' => 1.02,
531 'Unicode::Normalize' => 0.32,
532 'XML::Dumper' => 0.81,
533 'XML::LibXML' => 1.59,
534 'XML::LibXSLT' => 1.59,
535 'XML::SAX::ParserFactory' => 1.01,
536 'XML::Simple' => 2.14,
538 'YAML::Syck' => 0.71,
544 # Man pages generated from POD
545 INSTALLMAN1DIR => File::Spec->catdir($target_directories->{'MAN_DIR'}, 'man1'),
546 INSTALLMAN3DIR => File::Spec->catdir($target_directories->{'MAN_DIR'}, 'man3'),
548 PL_FILES => $pl_files,
556 This function recurses through the directory structure and builds
557 a hash of hashes containing the structure with arrays holding filenames.
558 This directory hashing routine was taken from BrowserUK @ http://www.perlmonks.org/?node_id=219919
564 opendir my $dh, $dir or die $!;
565 my $tree = {}->{$dir} = {};
566 while( my $file = readdir($dh) ) {
567 next if $file =~ m/^\.{1,2}/ and $file !~ /^\.htaccess/; # .htaccess is a special case
568 my $path = $dir .'/' . $file;
569 $tree->{$file} = hashdir($path), next if -d $path;
570 push @{$tree->{'.'}}, $file;
577 This function combines the target_map and file hash to
578 map each source file to its destination relative to
579 the set of installation targets.
581 Output will be a hash mapping from each source file
582 to its destination value, like this:
584 'mainpage.pl' => '$(INTRANET_CGI_DIR)/mainpage.pl'
589 my $target_map = shift;
591 my $file_map = shift;
592 my $install_zebra = shift;
593 my $curr_path = @_ ? shift : ['.'];
595 # Traverse the directory tree.
596 # For each file or directory, identify the
597 # most specific match in the target_map
598 foreach my $dir (sort keys %{ $dirtree }) {
600 # deal with files in directory
601 foreach my $file (sort @{ $dirtree->{$dir} }) {
602 my $targetdir = undef;
603 my $matchlevel = undef;
604 # first, see if there is a match on this specific
605 # file in the target map
606 my $filepath = join("/", @$curr_path, $file);
607 if (exists $target_map->{$filepath}) {
608 $targetdir = $target_map->{$filepath};
609 $matchlevel = scalar(@$curr_path) + 1;
611 # no match on the specific file; look for
613 for (my $i = scalar(@$curr_path) - 1; $i >= 0; $i--) {
614 my $dirpath = join("/", @$curr_path[0..$i]);
615 if (exists $target_map->{$dirpath}) {
616 $targetdir = $target_map->{$dirpath};
617 $matchlevel = $i + 1;
622 if (defined $targetdir) {
623 _add_to_file_map($file_map, $targetdir, $curr_path, $file, $matchlevel, $install_zebra);
625 my $path = join("/", @$curr_path);
626 print "failed to map: $path/$file\n" if $DEBUG;
630 # dealing with subdirectory
631 push @$curr_path, $dir;
632 get_file_map($target_map, $dirtree->{$dir}, $file_map, $install_zebra, $curr_path);
638 sub _add_to_file_map {
639 my $file_map = shift;
640 my $targetdir = shift;
641 my $curr_path = shift;
643 my $matchlevel = shift;
644 my $install_zebra = shift;
645 my $dest_path = @_ ? shift : $curr_path;
647 # The target can be one of the following:
648 # 1. scalar representing target symbol
649 # 2. hash ref containing target and trimdir keys
651 # Consequently, this routine traverses this structure,
652 # calling itself recursively, until it deals with
653 # all of the scalar target symbols.
654 if (ref $targetdir eq 'HASH') {
655 my $subtarget = $targetdir->{target};
656 if (exists $targetdir->{trimdir}) {
657 # if we get here, we've specified that
658 # rather than installing the file to
659 # $(TARGET)/matching/dirs/subdirs/file,
660 # we want to install it to
661 # $(TARGET)/subdirs/file
663 # Note that this the only place where
664 # $matchlevel is used.
665 my @new_dest_path = @$dest_path;
666 if ($targetdir->{trimdir} == -1) {
667 splice @new_dest_path, 0, $matchlevel;
669 splice @new_dest_path, 0, $targetdir->{trimdir};
671 _add_to_file_map($file_map, $subtarget, $curr_path, $file, $matchlevel, $install_zebra, \@new_dest_path);
673 # actually getting here means that the
674 # target was unnecessarily listed
675 # as a hash, but we'll forgive that
676 _add_to_file_map($file_map, $subtarget, $curr_path, $file, $matchlevel, $install_zebra);
678 } elsif ($targetdir ne 'NONE' and $targetdir ne '') {
679 my $source = File::Spec->catfile(@$curr_path, $file);
680 my $destination = File::Spec->catfile('blib', $targetdir, @$dest_path, $file);
681 #print "$source => $destination\n"; # DEBUG
682 # quote spaces in file names
683 # FIXME: this is of questionable portability and
684 # probably depends on user's make recognizing this
685 # quoting syntax -- probably better to remove
686 # spaces and shell metacharacters from all file names
687 $source =~ s/ /\\ /g;
688 $destination =~ s/ /\\ /g;
690 $file_map->{$source} = $destination unless (!$install_zebra and $targetdir =~ /ZEBRA/);
694 =head2 get_configuration
696 This prompts the user for various configuration options.
700 sub get_configuration {
701 my $defaults = shift;
702 my $valid_values = shift;
706 By default, Koha can be installed in one of three ways:
708 standard: Install files in conformance with the Filesystem
709 Hierarchy Standard (FHS). This is the default mode
710 and should be used when installing a production
711 Koha system. On Unix systems, root access is
712 needed to complete a standard installation.
714 single: Install files under a single directory. This option
715 is useful for installing Koha without root access, e.g.,
716 on a web host that allows CGI scripts and MySQL databases
717 but requires the user to keep all files under the user's
720 dev: Create a set of symbolic links and configuration files to
721 allow Koha to run directly from the source distribution.
722 This mode is useful for developers who want to run
723 Koha from a git clone.
726 $msg .= _add_valid_values_disp('INSTALL_MODE', $valid_values);
727 $config{'INSTALL_MODE'} = _get_value('INSTALL_MODE', $msg, $defaults->{'INSTALL_MODE'}, $valid_values);
729 # set message and default value for INSTALL_BASE
730 # depending on value of INSTALL_MODE
731 my $install_base_default = $defaults->{'INSTALL_BASE'};
732 if ($config{'INSTALL_MODE'} eq 'dev') {
734 Please specify the directory in which to install Koha's
735 active configuration files and (if applicable) the
736 Zebra database. Koha's CGI scripts and templates will
737 be run from the current directory.
739 Configuration directory:);
740 # FIXME - home directory portability consideration apply
741 $install_base_default = (exists $ENV{'HOME'}) ? "$ENV{'HOME'}/koha-dev" : "$defaults->{'INSTALL_BASE'}-dev";
742 } elsif ($config{'INSTALL_MODE'} eq 'single') {
743 $msg = "\nPlease specify the directory in which to install Koha";
744 # FIXME -- we're assuming under a 'single' mode install
745 # that user will likely want to install under the home
746 # directory. This is OK in and of itself, but we should
747 # use File::HomeDir to locate the home directory portably.
748 # This is deferred for now because File::HomeDir is not yet
750 # --we must also keep this portable to the major OS's -fbcit
751 $install_base_default = (exists $ENV{'HOME'}) ? "$ENV{'HOME'}/koha" : $defaults->{'INSTALL_BASE'};
755 Please specify the directory under which most Koha files
758 Note that if you are planning in installing more than
759 one instance of Koha, you may want to modify the last
760 component of the directory path, which will be used
761 as the package name in the FHS layout.
763 Base installation directory);
765 $config{'INSTALL_BASE'} = _get_value('INSTALL_BASE', $msg, $install_base_default, $valid_values);
767 $config{'INSTALL_BASE'} = File::Spec->rel2abs($config{'INSTALL_BASE'});
768 print "INSTALL_BASE=$config{'INSTALL_BASE'}\r\n" if $DEBUG;
769 if ($config{'INSTALL_MODE'} eq "standard") {
771 Since you are using the 'standard' install
772 mode, you should run 'make install' as root.
773 However, it is recommended that a non-root
774 user (on Unix and Linux platforms) have
775 ownership of Koha's files, including the
776 Zebra indexes if applicable.
778 Please specify a user account. This
779 user account does not need to exist
780 right now, but it needs to exist
781 before you run 'make install'. Please
782 note that for security reasons, this
783 user should not be the same as the user
784 account Apache runs under.
787 $config{'KOHA_USER'} = _get_value('KOHA_USER', $msg, $defaults->{'KOHA_USER'}, $valid_values);
790 Please specify the group that should own
791 Koha's files. As above, this group need
792 not exist right now, but should be created
793 before you run 'make install'.
796 $config{'KOHA_GROUP'} = _get_value('KOHA_GROUP', $msg, $defaults->{'KOHA_GROUP'}, $valid_values);
800 Please specify which database engine you will use
801 to store data in Koha. The choices are MySQL and
802 PostgreSQL; please note that at the moment
803 PostgreSQL support is highly experimental.
806 $msg .= _add_valid_values_disp('DB_TYPE', $valid_values);
807 $config{'DB_TYPE'} = _get_value('DB_TYPE', $msg, $defaults->{'DB_TYPE'}, $valid_values);
810 Please specify the name or address of your
811 database server. Note that the database
812 does not have to exist at this point, it
813 can be created after running 'make install'
814 and before you try using Koha for the first time.
817 $config{'DB_HOST'} = _get_value('DB_HOST', $msg, $defaults->{'DB_HOST'}, $valid_values);
820 Please specify the port used to connect to the
822 my $db_port_default = $config{'DB_TYPE'} eq 'mysql' ? '3306' : '5432';
823 $config{'DB_PORT'} = _get_value('DB_PORT', $msg, $db_port_default, $valid_values);
826 Please specify the name of the database to be
828 $config{'DB_NAME'} = _get_value('DB_NAME', $msg, $defaults->{'DB_NAME'}, $valid_values);
831 Please specify the user that owns the database to be
833 $config{'DB_USER'} = _get_value('DB_USER', $msg, $defaults->{'DB_USER'}, $valid_values);
836 Please specify the password of the user that owns the
837 database to be used by Koha);
838 $config{'DB_PASS'} = _get_value('DB_PASS', $msg, $defaults->{'DB_PASS'}, $valid_values);
841 Koha can use the Zebra search engine for high-performance
842 searching of bibliographic and authority records. If you
843 have installed the Zebra software and would like to use it,
844 please answer 'yes' to the following question. Otherwise,
845 Koha will default to using its internal search engine.
847 Please note that if you choose *NOT* to install Zebra,
848 koha-conf.xml will still contain some references to Zebra
849 settings. Those references will be ignored by Koha.
851 Install the Zebra configuration files?);
852 $msg .= _add_valid_values_disp('INSTALL_ZEBRA', $valid_values);
853 $config{'INSTALL_ZEBRA'} = _get_value('INSTALL_ZEBRA', $msg, $defaults->{'INSTALL_ZEBRA'}, $valid_values);
855 if ($config{'INSTALL_ZEBRA'} eq 'yes') {
857 Since you've chosen to use Zebra with Koha,
858 you must specify the primary MARC format of the
859 records to be indexed by Zebra.
861 Koha provides Zebra configuration files for MARC 21
864 MARC format for Zebra indexing);
865 $msg .= _add_valid_values_disp('ZEBRA_MARC_FORMAT', $valid_values);
866 $config{'ZEBRA_MARC_FORMAT'} = _get_value('ZEBRA_MARC_FORMAT', $msg, $defaults->{'ZEBRA_MARC_FORMAT'}, $valid_values);
868 Koha supplies Zebra configuration files tuned for
869 searching either English (en) or French (fr) MARC
872 Primary language for Zebra indexing);
873 $msg .= _add_valid_values_disp('ZEBRA_LANGUAGE', $valid_values);
874 $config{'ZEBRA_LANGUAGE'} = _get_value('ZEBRA_LANGUAGE', $msg, $defaults->{'ZEBRA_LANGUAGE'}, $valid_values);
877 Koha can use one of two different indexing modes
878 for the MARC authorities records:
880 grs1 - uses the Zebra GRS-1 filter, available
882 dom - uses the DOM XML filter; offers improved
885 Authorities indexing mode);
886 $msg .= _add_valid_values_disp('AUTH_INDEX_MODE', $valid_values);
887 $config{'AUTH_INDEX_MODE'} = _get_value('AUTH_INDEX_MODE', $msg, $defaults->{'AUTH_INDEX_MODE'}, $valid_values);
890 Please specify Zebra database user);
891 $config{'ZEBRA_USER'} = _get_value('ZEBRA_USER', $msg, $defaults->{'ZEBRA_USER'}, $valid_values);
894 Please specify the Zebra database password);
895 $config{'ZEBRA_PASS'} = _get_value('ZEBRA_PASS', $msg, $defaults->{'ZEBRA_PASS'}, $valid_values);
898 Since you've chosen to use Zebra, you can enable the SRU/
899 Z39.50 Server if you so choose, but you must specify a
900 few configuration options for it.
902 Please note that if you choose *NOT* to configure SRU,
903 koha-conf.xml will still contain some references to SRU
904 settings. Those references will be ignored by Koha.
906 Install the SRU configuration files?);
907 $msg .= _add_valid_values_disp('INSTALL_SRU', $valid_values);
908 $config{'INSTALL_SRU'} = _get_value('INSTALL_SRU', $msg, $defaults->{'INSTALL_SRU'}, $valid_values);
910 if ($config{'INSTALL_SRU'} eq 'yes') {
912 Since you've chosen to configure SRU, you must
913 specify the host and port(s) that the SRU
914 Servers (bibliographic and authority) should run on.
918 $config{'ZEBRA_SRU_HOST'} = _get_value('ZEBRA_SRU_HOST', $msg, $defaults->{'ZEBRA_SRU_HOST'}, $valid_values);
921 SRU port for bibliographic data?);
922 $config{'ZEBRA_SRU_BIBLIOS_PORT'} = _get_value('ZEBRA_SRU_BIBLIOS_PORT', $msg, $defaults->{'ZEBRA_SRU_BIBLIOS_PORT'}, $valid_values);
925 SRU port for authority data?);
926 $config{'ZEBRA_SRU_AUTHORITIES_PORT'} = _get_value('ZEBRA_SRU_AUTHORITIES_PORT', $msg, $defaults->{'ZEBRA_SRU_AUTHORITIES_PORT'}, $valid_values);
935 sub _add_valid_values_disp {
937 my $valid_values = shift;
940 if (exists $valid_values->{$key}) {
941 $disp = " (" . join(", ", sort keys %{ $valid_values->{$key} }) . ")";
950 my $valid_values = shift;
952 # override default value from environment
953 if (exists $ENV{$key}) {
954 $default = $ENV{$key};
955 $msg .= " (default from environment)";
958 my $val = prompt($msg, $default);
960 while (exists $valid_values->{$key} and
962 not exists $valid_values->{$key}->{$val}) {
963 my $retry_msg = "Value '$val' is not a valid option.\n";
964 $retry_msg .= "Please enter a value";
965 $retry_msg .= _add_valid_values_disp($key, $valid_values);
966 $val = prompt($retry_msg, $default);
971 =head2 get_target_directories
973 Creates a hash mapping from symbols for installation target
974 directories to actual directory paths.
976 Also returns a hash indicating targets for which
977 files need not be copied -- this is used for the 'dev'
978 mode installation, where some files are installed in place.
982 sub get_target_directories {
985 my $base = $config->{'INSTALL_BASE'};
986 my $mode = $config->{'INSTALL_MODE'};
988 # get last component of install base directory
989 # to treat as package name
990 my ($volume, $directories, $file) = File::Spec->splitpath($base, 1);
992 my @basedir = File::Spec->splitdir($directories);
994 # for Win32 we need to prepend the volume to the directory path
995 if ( $^O eq 'MSWin32' ) { shift @basedir; unshift @basedir, $volume; }
996 elsif ( $^O eq 'cygwin' ) { shift @basedir; unshift @basedir, 'c:'; } # in a cygwin environment, $volume is returned empty
998 my $package = pop @basedir;
1003 if ($mode eq 'single') {
1004 $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'cgi-bin');
1005 $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs', 'intranet-tmpl');
1006 $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs');
1007 $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'cgi-bin');
1008 $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs', 'opac-tmpl');
1009 $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs');
1010 $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir(@basedir, $package, 'lib');
1011 $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc');
1012 $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'zebradb');
1013 $dirmap{'MISC_DIR'} = File::Spec->catdir(@basedir, $package, 'misc');
1014 $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
1015 $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
1016 $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
1017 $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lock', 'zebradb');
1018 $dirmap{'LOG_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'log');
1019 $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lib', 'zebradb');
1020 $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'run', 'zebradb');
1021 } elsif ($mode eq 'dev') {
1022 my $curdir = File::Spec->rel2abs(File::Spec->curdir());
1023 $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir($curdir);
1024 $skipdirs{'INTRANET_CGI_DIR'} = 1;
1025 $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'intranet-tmpl');
1026 $skipdirs{'INTRANET_TMPL_DIR'} = 1;
1027 $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl');
1028 $skipdirs{'INTRANET_WWW_DIR'} = 1;
1029 $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir($curdir);
1030 $skipdirs{'OPAC_CGI_DIR'} = 1;
1031 $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl', 'opac-tmpl');
1032 $skipdirs{'OPAC_TMPL_DIR'} = 1;
1033 $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir($curdir, 'koha-tmpl');
1034 $skipdirs{'OPAC_WWW_DIR'} = 1;
1035 $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir($curdir);
1036 $skipdirs{'PERL_MODULE_DIR'} = 1;
1037 $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc');
1038 $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(@basedir, $package, 'etc', 'zebradb');
1039 $dirmap{'MISC_DIR'} = File::Spec->catdir(@basedir, $package, 'misc');
1040 $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
1041 $skipdirs{'SCRIPT_DIR'} = 1;
1042 $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
1043 $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
1044 $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lock', 'zebradb');
1045 $dirmap{'LOG_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'log');
1046 $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'lib', 'zebradb');
1047 $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(@basedir, $package, 'var', 'run', 'zebradb');
1049 # mode is standard, i.e., 'fhs'
1050 $dirmap{'INTRANET_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'cgi-bin');
1051 $dirmap{'INTRANET_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs', 'intranet-tmpl');
1052 $dirmap{'INTRANET_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'intranet', 'htdocs');
1053 $dirmap{'OPAC_CGI_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'cgi-bin');
1054 $dirmap{'OPAC_TMPL_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs', 'opac-tmpl');
1055 $dirmap{'OPAC_WWW_DIR'} = File::Spec->catdir(@basedir, $package, 'opac', 'htdocs');
1056 $dirmap{'PERL_MODULE_DIR'} = File::Spec->catdir(@basedir, $package, 'lib');
1057 $dirmap{'KOHA_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package);
1058 $dirmap{'ZEBRA_CONF_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'etc', $package, 'zebradb');
1059 $dirmap{'MISC_DIR'} = File::Spec->catdir(@basedir, $package, 'misc');
1060 $dirmap{'SCRIPT_DIR'} = File::Spec->catdir(@basedir, $package, 'bin');
1061 $dirmap{'MAN_DIR'} = File::Spec->catdir(@basedir, $package, 'man');
1062 $dirmap{'DOC_DIR'} = File::Spec->catdir(@basedir, $package, 'doc');
1063 $dirmap{'ZEBRA_LOCK_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'lock', $package, 'zebradb');
1064 $dirmap{'LOG_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'log', $package);
1065 $dirmap{'ZEBRA_DATA_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'lib', $package, 'zebradb');
1066 $dirmap{'ZEBRA_RUN_DIR'} = File::Spec->catdir(File::Spec->rootdir(), 'var', 'run', $package, 'zebradb');
1069 _get_env_overrides(\%dirmap);
1070 _get_argv_overrides(\%dirmap);
1072 return \%dirmap, \%skipdirs;
1075 sub _get_env_overrides {
1078 foreach my $key (keys %$dirmap) {
1079 if (exists $ENV{$key}) {
1080 $dirmap->{$key} = $ENV{$key};
1081 print "Setting $key from environment\n";
1086 sub _get_argv_overrides {
1090 for (my $i = 0; $i <= $#ARGV; $i++) {
1091 if ($ARGV[$i] =~ /^([^=]+)=([^=]+)$/ and exists $dirmap->{$1}) {
1094 push @new_argv, $ARGV[$i];
1100 sub display_configuration {
1103 print "\n\nKoha will be installed with the following configuration parameters:\n\n";
1104 foreach my $key (sort keys %$config) {
1105 print sprintf("%-25.25s%s\n", $key, $config->{$key});
1108 print "\nand in the following directories:\n\n";
1109 foreach my $key (sort keys %$dirmap) {
1110 print sprintf("%-25.25s%s\n", $key, $dirmap->{$key});
1112 print "\n\nTo change any configuration setting, please run\n";
1113 print "perl Makefile.PL again. To override one of the target\n";
1114 print "directories, you can do so on the command line like this:\n";
1115 print "\nperl Makefile.PL PERL_MODULE_DIR=/usr/share/perl/5.8\n\n";
1116 print "You can also set different default values for parameters\n";
1117 print "or override directory locations by using environment variables.\n";
1118 print "\nFor example:\n\n";
1119 print "export DB_USER=my_koha\n";
1120 print "perl Makefile.PL\n";
1122 print "DB_USER=my_koha DOC_DIR=/usr/local/info perl Makefile.PL\n\n";
1127 # This will have to be reworked in order to accommodate Win32...
1131 my $test = $self->SUPER::test(@_);
1132 $test =~ s!\$\(INST_LIB\)!blib/PERL_MODULE_DIR!g;
1135 $test =~ s!\$\(FULLPERLRUN\)!KOHA_CONF=blib/KOHA_CONF_DIR/koha-conf.xml \$(FULLPERLRUN)!g;
1142 # NOTE: we're *not* doing this: my $install = $self->SUPER::install(@_);
1143 # This means that we're completely overriding EU::MM's default
1144 # installation and uninstallation targets.
1146 # If installation is on Win32, we need to do permissions different from *nix
1147 if ( $^O =~ /darwin|linux|cygwin|freebsd/ ) { # this value needs to be verified for each platform and modified accordingly
1148 foreach my $key (sort keys %$target_directories) {
1150 KOHA_INST_$key = blib/$key
1151 KOHA_DEST_$key = $target_directories->{$key}
1152 ) unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1155 install :: all install_koha set_koha_ownership set_koha_permissions warn_koha_env_vars
1156 \t\$(NOECHO) \$(NOOP)
1158 $install .= "install_koha ::\n";
1159 $install .= "\t\$(NOECHO) umask 022; \$(MOD_INSTALL) \\\n";
1160 foreach my $key (sort keys %$target_directories) {
1161 $install .= "\t\t\$(KOHA_INST_$key) \$(KOHA_DEST_$key) \\\n"
1162 unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1164 $install .= "\t\t\$(INST_MAN1DIR) \$(DESTINSTALLMAN1DIR) \\\n";
1165 $install .= "\t\t\$(INST_MAN3DIR) \$(DESTINSTALLMAN3DIR)\n";
1168 $install .= "set_koha_ownership ::\n";
1169 if ($config{'INSTALL_MODE'} eq 'standard' and $config{'KOHA_USER'} ne "root") {
1170 foreach my $key (sort keys %$target_directories) {
1171 $install .= "\t\$(NOECHO) chown -R $config{'KOHA_USER'}:$config{'KOHA_GROUP'} \$(KOHA_DEST_$key)\n"
1172 unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1175 $install .= "\t\t\$(NOECHO) \$(NOOP)\n\n";
1179 $install .= "set_koha_permissions ::\n";
1180 # This is necessary because EU::MM installs files
1181 # as either 0444 or 0555, and we want the owner
1182 # of Koha's files to have write permission by default.
1183 foreach my $key (sort keys %$target_directories) {
1184 $install .= "\t\$(NOECHO) chmod -R u+w \$(KOHA_DEST_$key)\n"
1185 unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1188 elsif ($^O eq 'MSWin32' ) { # On Win32, the install probably needs to be done under the user account koha will be running as...
1189 # We can attempt some creative things with command line utils such as CACLS which allows permission
1190 # management from Win32 cmd.exe, but permissions really only apply to NTFS.
1191 foreach my $key (sort keys %$target_directories) {
1193 KOHA_INST_$key = blib/$key
1194 KOHA_DEST_$key = $target_directories->{$key}
1195 ) unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1198 install :: all install_koha warn_koha_env_vars
1199 \t\$(NOECHO) \$(NOOP)
1201 $install .= "install_koha ::\n";
1202 $install .= "\t\$(MOD_INSTALL) \\\n";
1203 foreach my $key (sort keys %$target_directories) {
1204 $install .= "\t\t\$(KOHA_INST_$key) \$(KOHA_DEST_$key) \\\n"
1205 unless ($config{'INSTALL_ZEBRA'} ne "yes" and $key =~ /ZEBRA/) or exists $skip_directories->{$key};
1210 $install .= "warn_koha_env_vars ::\n";
1211 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1212 $install .= "\t\$(NOECHO) \$(ECHO) Koha\\'s files have now been installed. \n";
1213 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1214 $install .= "\t\$(NOECHO) \$(ECHO) In order to use Koha\\'s command-line batch jobs,\n";
1215 $install .= "\t\$(NOECHO) \$(ECHO) you should set the following environment variables:\n";
1216 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1217 $install .= "\t\$(NOECHO) \$(ECHO) export KOHA_CONF=\$(KOHA_DEST_KOHA_CONF_DIR)/koha-conf.xml\n";
1218 $install .= "\t\$(NOECHO) \$(ECHO) export PERL5LIB=$target_directories->{'PERL_MODULE_DIR'}\n";
1219 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1220 $install .= "\t\$(NOECHO) \$(ECHO) If installing on a Win32 platform, be sure to use:\n";
1221 $install .= "\t\$(NOECHO) \$(ECHO) 'dmake -x MAXLINELENGTH=300000'\n";
1222 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1223 $install .= "\t\$(NOECHO) \$(ECHO) For other post-installation tasks, please consult the README.\n";
1224 $install .= "\t\$(NOECHO) \$(ECHO)\n";
1226 if ($config{'INSTALL_ZEBRA'} eq "yes") {
1227 $install .= _update_zebra_conf_target();
1233 =head 2 _update_zebra_conf_target
1235 Add an installation target for updating
1236 Zebra's configuration files.
1240 sub _update_zebra_conf_target {
1242 my $target = "\nupdate_zebra_conf ::\n";
1243 $target .= "\tumask 022; \$(MOD_INSTALL) \\\n";
1244 $target .= "\t\t\$(KOHA_INST_ZEBRA_CONF_DIR) \$(KOHA_DEST_ZEBRA_CONF_DIR) \n";
1250 # put directory mappings into Makefile
1251 # so that Make will export as environment
1252 # variables -- this is for the use of
1255 # quote '$' in the two password parameters
1256 my %config = %config;
1257 $config{'DB_PASS'} =~ s/\$/\$\$/g;
1258 if ($config{'INSTALL_ZEBRA'} eq "yes") {
1259 $config{'ZEBRA_PASS'} =~ s/\$/\$\$/g;
1262 # Hereagain, we must alter syntax per platform...
1263 if ( $^O eq 'MSWin32' ) {
1264 # NOTE: it is imperative that there be no whitespaces in ENV=value...
1265 my $env = join("\n", map { "__${_}__=$target_directories->{$_}" } keys %$target_directories);
1267 $env .= join("\n", map { "__${_}__=$config{$_}" } keys %config);
1271 my $env = join("\n", map { "export __${_}__ := $target_directories->{$_}" } keys %$target_directories);
1273 $env .= join("\n", map { "export __${_}__ := $config{$_}" } keys %config);
1284 ExtUtils::MakeMaker(3)
1288 MJ Ray mjr at phonecoop.coop
1289 Galen Charlton galen.charlton at liblime.com
1292 FIXME: deal with .htaccess