6324 Add an `ndp' tool for manipulating the neighbors table

[illumos-gate.git] / usr / src / uts / common / os / fio.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright (c) 1989, 2010, Oracle and/or its affiliates. All rights reserved.
 * Copyright (c) 2012, Joyent Inc. All rights reserved.
 */

/*      Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */
/*      All Rights Reserved */

#include <sys/types.h>
#include <sys/sysmacros.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/signal.h>
#include <sys/cred.h>
#include <sys/user.h>
#include <sys/conf.h>
#include <sys/vfs.h>
#include <sys/vnode.h>
#include <sys/pathname.h>
#include <sys/file.h>
#include <sys/proc.h>
#include <sys/var.h>
#include <sys/cpuvar.h>
#include <sys/open.h>
#include <sys/cmn_err.h>
#include <sys/priocntl.h>
#include <sys/procset.h>
#include <sys/prsystm.h>
#include <sys/debug.h>
#include <sys/kmem.h>
#include <sys/atomic.h>
#include <sys/fcntl.h>
#include <sys/poll.h>
#include <sys/rctl.h>
#include <sys/port_impl.h>
#include <sys/dtrace.h>

#include <c2/audit.h>
#include <sys/nbmlock.h>

#ifdef DEBUG

static uint32_t afd_maxfd;      /* # of entries in maximum allocated array */
static uint32_t afd_alloc;      /* count of kmem_alloc()s */
static uint32_t afd_free;       /* count of kmem_free()s */
static uint32_t afd_wait;       /* count of waits on non-zero ref count */
#define MAXFD(x)        (afd_maxfd = ((afd_maxfd >= (x))? afd_maxfd : (x)))
#define COUNT(x)        atomic_inc_32(&x)

#else   /* DEBUG */

#define MAXFD(x)
#define COUNT(x)

#endif  /* DEBUG */

kmem_cache_t *file_cache;

static void port_close_fd(portfd_t *);

/*
 * File descriptor allocation.
 *
 * fd_find(fip, minfd) finds the first available descriptor >= minfd.
 * The most common case is open(2), in which minfd = 0, but we must also
 * support fcntl(fd, F_DUPFD, minfd).
 *
 * The algorithm is as follows: we keep all file descriptors in an infix
 * binary tree in which each node records the number of descriptors
 * allocated in its right subtree, including itself.  Starting at minfd,
 * we ascend the tree until we find a non-fully allocated right subtree.
 * We then descend that subtree in a binary search for the smallest fd.
 * Finally, we ascend the tree again to increment the allocation count
 * of every subtree containing the newly-allocated fd.  Freeing an fd
 * requires only the last step: we ascend the tree to decrement allocation
 * counts.  Each of these three steps (ascent to find non-full subtree,
 * descent to find lowest fd, ascent to update allocation counts) is
 * O(log n), thus the algorithm as a whole is O(log n).
 *
 * We don't implement the fd tree using the customary left/right/parent
 * pointers, but instead take advantage of the glorious mathematics of
 * full infix binary trees.  For reference, here's an illustration of the
 * logical structure of such a tree, rooted at 4 (binary 100), covering
 * the range 1-7 (binary 001-111).  Our canonical trees do not include
 * fd 0; we'll deal with that later.
 *
 *            100
 *           /   \
 *          /     \
 *        010     110
 *        / \     / \
 *      001 011 101 111
 *
 * We make the following observations, all of which are easily proven by
 * induction on the depth of the tree:
 *
 * (T1) The least-significant bit (LSB) of any node is equal to its level
 *      in the tree.  In our example, nodes 001, 011, 101 and 111 are at
 *      level 0; nodes 010 and 110 are at level 1; and node 100 is at level 2.
 *
 * (T2) The child size (CSIZE) of node N -- that is, the total number of
 *      right-branch descendants in a child of node N, including itself -- is
 *      given by clearing all but the least significant bit of N.  This
 *      follows immediately from (T1).  Applying this rule to our example, we
 *      see that CSIZE(100) = 100, CSIZE(x10) = 10, and CSIZE(xx1) = 1.
 *
 * (T3) The nearest left ancestor (LPARENT) of node N -- that is, the nearest
 *      ancestor containing node N in its right child -- is given by clearing
 *      the LSB of N.  For example, LPARENT(111) = 110 and LPARENT(110) = 100.
 *      Clearing the LSB of nodes 001, 010 or 100 yields zero, reflecting
 *      the fact that these are leftmost nodes.  Note that this algorithm
 *      automatically skips generations as necessary.  For example, the parent
 *      of node 101 is 110, which is a *right* ancestor (not what we want);
 *      but its grandparent is 100, which is a left ancestor. Clearing the LSB
 *      of 101 gets us to 100 directly, skipping right past the uninteresting
 *      generation (110).
 *
 *      Note that since LPARENT clears the LSB, whereas CSIZE clears all *but*
 *      the LSB, we can express LPARENT() nicely in terms of CSIZE():
 *
 *      LPARENT(N) = N - CSIZE(N)
 *
 * (T4) The nearest right ancestor (RPARENT) of node N is given by:
 *
 *      RPARENT(N) = N + CSIZE(N)
 *
 * (T5) For every interior node, the children differ from their parent by
 *      CSIZE(parent) / 2.  In our example, CSIZE(100) / 2 = 2 = 10 binary,
 *      and indeed, the children of 100 are 100 +/- 10 = 010 and 110.
 *
 * Next, we'll need a few two's-complement math tricks.  Suppose a number,
 * N, has the following form:
 *
 *              N = xxxx10...0
 *
 * That is, the binary representation of N consists of some string of bits,
 * then a 1, then all zeroes.  This amounts to nothing more than saying that
 * N has a least-significant bit, which is true for any N != 0.  If we look
 * at N and N - 1 together, we see that we can combine them in useful ways:
 *
 *                N = xxxx10...0
 *            N - 1 = xxxx01...1
 *      ------------------------
 *      N & (N - 1) = xxxx000000
 *      N | (N - 1) = xxxx111111
 *      N ^ (N - 1) =     111111
 *
 * In particular, this suggests several easy ways to clear all but the LSB,
 * which by (T2) is exactly what we need to determine CSIZE(N) = 10...0.
 * We'll opt for this formulation:
 *
 *      (C1) CSIZE(N) = (N - 1) ^ (N | (N - 1))
 *
 * Similarly, we have an easy way to determine LPARENT(N), which requires
 * that we clear the LSB of N:
 *
 *      (L1) LPARENT(N) = N & (N - 1)
 *
 * We note in the above relations that (N | (N - 1)) - N = CSIZE(N) - 1.
 * When combined with (T4), this yields an easy way to compute RPARENT(N):
 *
 *      (R1) RPARENT(N) = (N | (N - 1)) + 1
 *
 * Finally, to accommodate fd 0 we must adjust all of our results by +/-1 to
 * move the fd range from [1, 2^n) to [0, 2^n - 1).  This is straightforward,
 * so there's no need to belabor the algebra; the revised relations become:
 *
 *      (C1a) CSIZE(N) = N ^ (N | (N + 1))
 *
 *      (L1a) LPARENT(N) = (N & (N + 1)) - 1
 *
 *      (R1a) RPARENT(N) = N | (N + 1)
 *
 * This completes the mathematical framework.  We now have all the tools
 * we need to implement fd_find() and fd_reserve().
 *
 * fd_find(fip, minfd) finds the smallest available file descriptor >= minfd.
 * It does not actually allocate the descriptor; that's done by fd_reserve().
 * fd_find() proceeds in two steps:
 *
 * (1) Find the leftmost subtree that contains a descriptor >= minfd.
 *     We start at the right subtree rooted at minfd.  If this subtree is
 *     not full -- if fip->fi_list[minfd].uf_alloc != CSIZE(minfd) -- then
 *     step 1 is done.  Otherwise, we know that all fds in this subtree
 *     are taken, so we ascend to RPARENT(minfd) using (R1a).  We repeat
 *     this process until we either find a candidate subtree or exceed
 *     fip->fi_nfiles.  We use (C1a) to compute CSIZE().
 *
 * (2) Find the smallest fd in the subtree discovered by step 1.
 *     Starting at the root of this subtree, we descend to find the
 *     smallest available fd.  Since the left children have the smaller
 *     fds, we will descend rightward only when the left child is full.
 *
 *     We begin by comparing the number of allocated fds in the root
 *     to the number of allocated fds in its right child; if they differ
 *     by exactly CSIZE(child), we know the left subtree is full, so we
 *     descend right; that is, the right child becomes the search root.
 *     Otherwise we leave the root alone and start following the right
 *     child's left children.  As fortune would have it, this is very
 *     simple computationally: by (T5), the right child of fd is just
 *     fd + size, where size = CSIZE(fd) / 2.  Applying (T5) again,
 *     we find that the right child's left child is fd + size - (size / 2) =
 *     fd + (size / 2); *its* left child is fd + (size / 2) - (size / 4) =
 *     fd + (size / 4), and so on.  In general, fd's right child's
 *     leftmost nth descendant is fd + (size >> n).  Thus, to follow
 *     the right child's left descendants, we just halve the size in
 *     each iteration of the search.
 *
 *     When we descend leftward, we must keep track of the number of fds
 *     that were allocated in all the right subtrees we rejected, so we
 *     know how many of the root fd's allocations are in the remaining
 *     (as yet unexplored) leftmost part of its right subtree.  When we
 *     encounter a fully-allocated left child -- that is, when we find
 *     that fip->fi_list[fd].uf_alloc == ralloc + size -- we descend right
 *     (as described earlier), resetting ralloc to zero.
 *
 * fd_reserve(fip, fd, incr) either allocates or frees fd, depending
 * on whether incr is 1 or -1.  Starting at fd, fd_reserve() ascends
 * the leftmost ancestors (see (T3)) and updates the allocation counts.
 * At each step we use (L1a) to compute LPARENT(), the next left ancestor.
 *
 * flist_minsize() finds the minimal tree that still covers all
 * used fds; as long as the allocation count of a root node is zero, we
 * don't need that node or its right subtree.
 *
 * flist_nalloc() counts the number of allocated fds in the tree, by starting
 * at the top of the tree and summing the right-subtree allocation counts as
 * it descends leftwards.
 *
 * Note: we assume that flist_grow() will keep fip->fi_nfiles of the form
 * 2^n - 1.  This ensures that the fd trees are always full, which saves
 * quite a bit of boundary checking.
 */
static int
fd_find(uf_info_t *fip, int minfd)
{
        int size, ralloc, fd;

        ASSERT(MUTEX_HELD(&fip->fi_lock));
        ASSERT((fip->fi_nfiles & (fip->fi_nfiles + 1)) == 0);

        for (fd = minfd; (uint_t)fd < fip->fi_nfiles; fd |= fd + 1) {
                size = fd ^ (fd | (fd + 1));
                if (fip->fi_list[fd].uf_alloc == size)
                        continue;
                for (ralloc = 0, size >>= 1; size != 0; size >>= 1) {
                        ralloc += fip->fi_list[fd + size].uf_alloc;
                        if (fip->fi_list[fd].uf_alloc == ralloc + size) {
                                fd += size;
                                ralloc = 0;
                        }
                }
                return (fd);
        }
        return (-1);
}

static void
fd_reserve(uf_info_t *fip, int fd, int incr)
{
        int pfd;
        uf_entry_t *ufp = &fip->fi_list[fd];

        ASSERT((uint_t)fd < fip->fi_nfiles);
        ASSERT((ufp->uf_busy == 0 && incr == 1) ||
            (ufp->uf_busy == 1 && incr == -1));
        ASSERT(MUTEX_HELD(&ufp->uf_lock));
        ASSERT(MUTEX_HELD(&fip->fi_lock));

        for (pfd = fd; pfd >= 0; pfd = (pfd & (pfd + 1)) - 1)
                fip->fi_list[pfd].uf_alloc += incr;

        ufp->uf_busy += incr;
}

static int
flist_minsize(uf_info_t *fip)
{
        int fd;

        /*
         * We'd like to ASSERT(MUTEX_HELD(&fip->fi_lock)), but we're called
         * by flist_fork(), which relies on other mechanisms for mutual
         * exclusion.
         */
        ASSERT((fip->fi_nfiles & (fip->fi_nfiles + 1)) == 0);

        for (fd = fip->fi_nfiles; fd != 0; fd >>= 1)
                if (fip->fi_list[fd >> 1].uf_alloc != 0)
                        break;

        return (fd);
}

static int
flist_nalloc(uf_info_t *fip)
{
        int fd;
        int nalloc = 0;

        ASSERT(MUTEX_HELD(&fip->fi_lock));
        ASSERT((fip->fi_nfiles & (fip->fi_nfiles + 1)) == 0);

        for (fd = fip->fi_nfiles; fd != 0; fd >>= 1)
                nalloc += fip->fi_list[fd >> 1].uf_alloc;

        return (nalloc);
}

/*
 * Increase size of the fi_list array to accommodate at least maxfd.
 * We keep the size of the form 2^n - 1 for benefit of fd_find().
 */
static void
flist_grow(int maxfd)
{
        uf_info_t *fip = P_FINFO(curproc);
        int newcnt, oldcnt;
        uf_entry_t *src, *dst, *newlist, *oldlist, *newend, *oldend;
        uf_rlist_t *urp;

        for (newcnt = 1; newcnt <= maxfd; newcnt = (newcnt << 1) | 1)
                continue;

        newlist = kmem_zalloc(newcnt * sizeof (uf_entry_t), KM_SLEEP);

        mutex_enter(&fip->fi_lock);
        oldcnt = fip->fi_nfiles;
        if (newcnt <= oldcnt) {
                mutex_exit(&fip->fi_lock);
                kmem_free(newlist, newcnt * sizeof (uf_entry_t));
                return;
        }
        ASSERT((newcnt & (newcnt + 1)) == 0);
        oldlist = fip->fi_list;
        oldend = oldlist + oldcnt;
        newend = newlist + oldcnt;      /* no need to lock beyond old end */

        /*
         * fi_list and fi_nfiles cannot change while any uf_lock is held,
         * so we must grab all the old locks *and* the new locks up to oldcnt.
         * (Locks beyond the end of oldcnt aren't visible until we store
         * the new fi_nfiles, which is the last thing we do before dropping
         * all the locks, so there's no need to acquire these locks).
         * Holding the new locks is necessary because when fi_list changes
         * to point to the new list, fi_nfiles won't have been stored yet.
         * If we *didn't* hold the new locks, someone doing a UF_ENTER()
         * could see the new fi_list, grab the new uf_lock, and then see
         * fi_nfiles change while the lock is held -- in violation of
         * UF_ENTER() semantics.
         */
        for (src = oldlist; src < oldend; src++)
                mutex_enter(&src->uf_lock);

        for (dst = newlist; dst < newend; dst++)
                mutex_enter(&dst->uf_lock);

        for (src = oldlist, dst = newlist; src < oldend; src++, dst++) {
                dst->uf_file = src->uf_file;
                dst->uf_fpollinfo = src->uf_fpollinfo;
                dst->uf_refcnt = src->uf_refcnt;
                dst->uf_alloc = src->uf_alloc;
                dst->uf_flag = src->uf_flag;
                dst->uf_busy = src->uf_busy;
                dst->uf_portfd = src->uf_portfd;
        }

        /*
         * As soon as we store the new flist, future locking operations
         * will use it.  Therefore, we must ensure that all the state
         * we've just established reaches global visibility before the
         * new flist does.
         */
        membar_producer();
        fip->fi_list = newlist;

        /*
         * Routines like getf() make an optimistic check on the validity
         * of the supplied file descriptor: if it's less than the current
         * value of fi_nfiles -- examined without any locks -- then it's
         * safe to attempt a UF_ENTER() on that fd (which is a valid
         * assumption because fi_nfiles only increases).  Therefore, it
         * is critical that the new value of fi_nfiles not reach global
         * visibility until after the new fi_list: if it happened the
         * other way around, getf() could see the new fi_nfiles and attempt
         * a UF_ENTER() on the old fi_list, which would write beyond its
         * end if the fd exceeded the old fi_nfiles.
         */
        membar_producer();
        fip->fi_nfiles = newcnt;

        /*
         * The new state is consistent now, so we can drop all the locks.
         */
        for (dst = newlist; dst < newend; dst++)
                mutex_exit(&dst->uf_lock);

        for (src = oldlist; src < oldend; src++) {
                /*
                 * If any threads are blocked on the old cvs, wake them.
                 * This will force them to wake up, discover that fi_list
                 * has changed, and go back to sleep on the new cvs.
                 */
                cv_broadcast(&src->uf_wanted_cv);
                cv_broadcast(&src->uf_closing_cv);
                mutex_exit(&src->uf_lock);
        }

        mutex_exit(&fip->fi_lock);

        /*
         * Retire the old flist.  We can't actually kmem_free() it now
         * because someone may still have a pointer to it.  Instead,
         * we link it onto a list of retired flists.  The new flist
         * is at least double the size of the previous flist, so the
         * total size of all retired flists will be less than the size
         * of the current one (to prove, consider the sum of a geometric
         * series in powers of 2).  exit() frees the retired flists.
         */
        urp = kmem_zalloc(sizeof (uf_rlist_t), KM_SLEEP);
        urp->ur_list = oldlist;
        urp->ur_nfiles = oldcnt;

        mutex_enter(&fip->fi_lock);
        urp->ur_next = fip->fi_rlist;
        fip->fi_rlist = urp;
        mutex_exit(&fip->fi_lock);
}

/*
 * Utility functions for keeping track of the active file descriptors.
 */
void
clear_stale_fd()                /* called from post_syscall() */
{
        afd_t *afd = &curthread->t_activefd;
        int i;

        /* uninitialized is ok here, a_nfd is then zero */
        for (i = 0; i < afd->a_nfd; i++) {
                /* assert that this should not be necessary */
                ASSERT(afd->a_fd[i] == -1);
                afd->a_fd[i] = -1;
        }
        afd->a_stale = 0;
}

void
free_afd(afd_t *afd)            /* called below and from thread_free() */
{
        int i;

        /* free the buffer if it was kmem_alloc()ed */
        if (afd->a_nfd > sizeof (afd->a_buf) / sizeof (afd->a_buf[0])) {
                COUNT(afd_free);
                kmem_free(afd->a_fd, afd->a_nfd * sizeof (afd->a_fd[0]));
        }

        /* (re)initialize the structure */
        afd->a_fd = &afd->a_buf[0];
        afd->a_nfd = sizeof (afd->a_buf) / sizeof (afd->a_buf[0]);
        afd->a_stale = 0;
        for (i = 0; i < afd->a_nfd; i++)
                afd->a_fd[i] = -1;
}

static void
set_active_fd(int fd)
{
        afd_t *afd = &curthread->t_activefd;
        int i;
        int *old_fd;
        int old_nfd;
        int *new_fd;
        int new_nfd;

        if (afd->a_nfd == 0) {  /* first time initialization */
                ASSERT(fd == -1);
                mutex_enter(&afd->a_fdlock);
                free_afd(afd);
                mutex_exit(&afd->a_fdlock);
        }

        /* insert fd into vacant slot, if any */
        for (i = 0; i < afd->a_nfd; i++) {
                if (afd->a_fd[i] == -1) {
                        afd->a_fd[i] = fd;
                        return;
                }
        }

        /*
         * Reallocate the a_fd[] array to add one more slot.
         */
        ASSERT(fd == -1);
        old_nfd = afd->a_nfd;
        old_fd = afd->a_fd;
        new_nfd = old_nfd + 1;
        new_fd = kmem_alloc(new_nfd * sizeof (afd->a_fd[0]), KM_SLEEP);
        MAXFD(new_nfd);
        COUNT(afd_alloc);

        mutex_enter(&afd->a_fdlock);
        afd->a_fd = new_fd;
        afd->a_nfd = new_nfd;
        for (i = 0; i < old_nfd; i++)
                afd->a_fd[i] = old_fd[i];
        afd->a_fd[i] = fd;
        mutex_exit(&afd->a_fdlock);

        if (old_nfd > sizeof (afd->a_buf) / sizeof (afd->a_buf[0])) {
                COUNT(afd_free);
                kmem_free(old_fd, old_nfd * sizeof (afd->a_fd[0]));
        }
}

void
clear_active_fd(int fd)         /* called below and from aio.c */
{
        afd_t *afd = &curthread->t_activefd;
        int i;

        for (i = 0; i < afd->a_nfd; i++) {
                if (afd->a_fd[i] == fd) {
                        afd->a_fd[i] = -1;
                        break;
                }
        }
        ASSERT(i < afd->a_nfd);         /* not found is not ok */
}

/*
 * Does this thread have this fd active?
 */
static int
is_active_fd(kthread_t *t, int fd)
{
        afd_t *afd = &t->t_activefd;
        int i;

        ASSERT(t != curthread);
        mutex_enter(&afd->a_fdlock);
        /* uninitialized is ok here, a_nfd is then zero */
        for (i = 0; i < afd->a_nfd; i++) {
                if (afd->a_fd[i] == fd) {
                        mutex_exit(&afd->a_fdlock);
                        return (1);
                }
        }
        mutex_exit(&afd->a_fdlock);
        return (0);
}

/*
 * Convert a user supplied file descriptor into a pointer to a file
 * structure.  Only task is to check range of the descriptor (soft
 * resource limit was enforced at open time and shouldn't be checked
 * here).
 */
file_t *
getf(int fd)
{
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;
        file_t *fp;

        if ((uint_t)fd >= fip->fi_nfiles)
                return (NULL);

        /*
         * Reserve a slot in the active fd array now so we can call
         * set_active_fd(fd) for real below, while still inside UF_ENTER().
         */
        set_active_fd(-1);

        UF_ENTER(ufp, fip, fd);

        if ((fp = ufp->uf_file) == NULL) {
                UF_EXIT(ufp);

                if (fd == fip->fi_badfd && fip->fi_action > 0)
                        tsignal(curthread, fip->fi_action);

                return (NULL);
        }
        ufp->uf_refcnt++;

        set_active_fd(fd);      /* record the active file descriptor */

        UF_EXIT(ufp);

        return (fp);
}

/*
 * Close whatever file currently occupies the file descriptor slot
 * and install the new file, usually NULL, in the file descriptor slot.
 * The close must complete before we release the file descriptor slot.
 * If newfp != NULL we only return an error if we can't allocate the
 * slot so the caller knows that it needs to free the filep;
 * in the other cases we return the error number from closef().
 */
int
closeandsetf(int fd, file_t *newfp)
{
        proc_t *p = curproc;
        uf_info_t *fip = P_FINFO(p);
        uf_entry_t *ufp;
        file_t *fp;
        fpollinfo_t *fpip;
        portfd_t *pfd;
        int error;

        if ((uint_t)fd >= fip->fi_nfiles) {
                if (newfp == NULL)
                        return (EBADF);
                flist_grow(fd);
        }

        if (newfp != NULL) {
                /*
                 * If ufp is reserved but has no file pointer, it's in the
                 * transition between ufalloc() and setf().  We must wait
                 * for this transition to complete before assigning the
                 * new non-NULL file pointer.
                 */
                mutex_enter(&fip->fi_lock);
                if (fd == fip->fi_badfd) {
                        mutex_exit(&fip->fi_lock);
                        if (fip->fi_action > 0)
                                tsignal(curthread, fip->fi_action);
                        return (EBADF);
                }
                UF_ENTER(ufp, fip, fd);
                while (ufp->uf_busy && ufp->uf_file == NULL) {
                        mutex_exit(&fip->fi_lock);
                        cv_wait_stop(&ufp->uf_wanted_cv, &ufp->uf_lock, 250);
                        UF_EXIT(ufp);
                        mutex_enter(&fip->fi_lock);
                        UF_ENTER(ufp, fip, fd);
                }
                if ((fp = ufp->uf_file) == NULL) {
                        ASSERT(ufp->uf_fpollinfo == NULL);
                        ASSERT(ufp->uf_flag == 0);
                        fd_reserve(fip, fd, 1);
                        ufp->uf_file = newfp;
                        UF_EXIT(ufp);
                        mutex_exit(&fip->fi_lock);
                        return (0);
                }
                mutex_exit(&fip->fi_lock);
        } else {
                UF_ENTER(ufp, fip, fd);
                if ((fp = ufp->uf_file) == NULL) {
                        UF_EXIT(ufp);
                        return (EBADF);
                }
        }

        ASSERT(ufp->uf_busy);
        ufp->uf_file = NULL;
        ufp->uf_flag = 0;

        /*
         * If the file descriptor reference count is non-zero, then
         * some other lwp in the process is performing system call
         * activity on the file.  To avoid blocking here for a long
         * time (the other lwp might be in a long term sleep in its
         * system call), we scan all other lwps in the process to
         * find the ones with this fd as one of their active fds,
         * set their a_stale flag, and set them running if they
         * are in an interruptible sleep so they will emerge from
         * their system calls immediately.  post_syscall() will
         * test the a_stale flag and set errno to EBADF.
         */
        ASSERT(ufp->uf_refcnt == 0 || p->p_lwpcnt > 1);
        if (ufp->uf_refcnt > 0) {
                kthread_t *t;

                /*
                 * We call sprlock_proc(p) to ensure that the thread
                 * list will not change while we are scanning it.
                 * To do this, we must drop ufp->uf_lock and then
                 * reacquire it (so we are not holding both p->p_lock
                 * and ufp->uf_lock at the same time).  ufp->uf_lock
                 * must be held for is_active_fd() to be correct
                 * (set_active_fd() is called while holding ufp->uf_lock).
                 *
                 * This is a convoluted dance, but it is better than
                 * the old brute-force method of stopping every thread
                 * in the process by calling holdlwps(SHOLDFORK1).
                 */

                UF_EXIT(ufp);
                COUNT(afd_wait);

                mutex_enter(&p->p_lock);
                sprlock_proc(p);
                mutex_exit(&p->p_lock);

                UF_ENTER(ufp, fip, fd);
                ASSERT(ufp->uf_file == NULL);

                if (ufp->uf_refcnt > 0) {
                        for (t = curthread->t_forw;
                            t != curthread;
                            t = t->t_forw) {
                                if (is_active_fd(t, fd)) {
                                        thread_lock(t);
                                        t->t_activefd.a_stale = 1;
                                        t->t_post_sys = 1;
                                        if (ISWAKEABLE(t))
                                                setrun_locked(t);
                                        thread_unlock(t);
                                }
                        }
                }

                UF_EXIT(ufp);

                mutex_enter(&p->p_lock);
                sprunlock(p);

                UF_ENTER(ufp, fip, fd);
                ASSERT(ufp->uf_file == NULL);
        }

        /*
         * Wait for other lwps to stop using this file descriptor.
         */
        while (ufp->uf_refcnt > 0) {
                cv_wait_stop(&ufp->uf_closing_cv, &ufp->uf_lock, 250);
                /*
                 * cv_wait_stop() drops ufp->uf_lock, so the file list
                 * can change.  Drop the lock on our (possibly) stale
                 * ufp and let UF_ENTER() find and lock the current ufp.
                 */
                UF_EXIT(ufp);
                UF_ENTER(ufp, fip, fd);
        }

#ifdef DEBUG
        /*
         * catch a watchfd on device's pollhead list but not on fpollinfo list
         */
        if (ufp->uf_fpollinfo != NULL)
                checkwfdlist(fp->f_vnode, ufp->uf_fpollinfo);
#endif  /* DEBUG */

        /*
         * We may need to cleanup some cached poll states in t_pollstate
         * before the fd can be reused. It is important that we don't
         * access a stale thread structure. We will do the cleanup in two
         * phases to avoid deadlock and holding uf_lock for too long.
         * In phase 1, hold the uf_lock and call pollblockexit() to set
         * state in t_pollstate struct so that a thread does not exit on
         * us. In phase 2, we drop the uf_lock and call pollcacheclean().
         */
        pfd = ufp->uf_portfd;
        ufp->uf_portfd = NULL;
        fpip = ufp->uf_fpollinfo;
        ufp->uf_fpollinfo = NULL;
        if (fpip != NULL)
                pollblockexit(fpip);
        UF_EXIT(ufp);
        if (fpip != NULL)
                pollcacheclean(fpip, fd);
        if (pfd)
                port_close_fd(pfd);

        /*
         * Keep the file descriptor entry reserved across the closef().
         */
        error = closef(fp);

        setf(fd, newfp);

        /* Only return closef() error when closing is all we do */
        return (newfp == NULL ? error : 0);
}

/*
 * Decrement uf_refcnt; wakeup anyone waiting to close the file.
 */
void
releasef(int fd)
{
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;

        UF_ENTER(ufp, fip, fd);
        ASSERT(ufp->uf_refcnt > 0);
        clear_active_fd(fd);    /* clear the active file descriptor */
        if (--ufp->uf_refcnt == 0)
                cv_broadcast(&ufp->uf_closing_cv);
        UF_EXIT(ufp);
}

/*
 * Identical to releasef() but can be called from another process.
 */
void
areleasef(int fd, uf_info_t *fip)
{
        uf_entry_t *ufp;

        UF_ENTER(ufp, fip, fd);
        ASSERT(ufp->uf_refcnt > 0);
        if (--ufp->uf_refcnt == 0)
                cv_broadcast(&ufp->uf_closing_cv);
        UF_EXIT(ufp);
}

/*
 * Duplicate all file descriptors across a fork.
 */
void
flist_fork(uf_info_t *pfip, uf_info_t *cfip)
{
        int fd, nfiles;
        uf_entry_t *pufp, *cufp;

        mutex_init(&cfip->fi_lock, NULL, MUTEX_DEFAULT, NULL);
        cfip->fi_rlist = NULL;

        /*
         * We don't need to hold fi_lock because all other lwp's in the
         * parent have been held.
         */
        cfip->fi_nfiles = nfiles = flist_minsize(pfip);

        cfip->fi_list = kmem_zalloc(nfiles * sizeof (uf_entry_t), KM_SLEEP);

        for (fd = 0, pufp = pfip->fi_list, cufp = cfip->fi_list; fd < nfiles;
            fd++, pufp++, cufp++) {
                cufp->uf_file = pufp->uf_file;
                cufp->uf_alloc = pufp->uf_alloc;
                cufp->uf_flag = pufp->uf_flag;
                cufp->uf_busy = pufp->uf_busy;
                if (pufp->uf_file == NULL) {
                        ASSERT(pufp->uf_flag == 0);
                        if (pufp->uf_busy) {
                                /*
                                 * Grab locks to appease ASSERTs in fd_reserve
                                 */
                                mutex_enter(&cfip->fi_lock);
                                mutex_enter(&cufp->uf_lock);
                                fd_reserve(cfip, fd, -1);
                                mutex_exit(&cufp->uf_lock);
                                mutex_exit(&cfip->fi_lock);
                        }
                }
        }
}

/*
 * Close all open file descriptors for the current process.
 * This is only called from exit(), which is single-threaded,
 * so we don't need any locking.
 */
void
closeall(uf_info_t *fip)
{
        int fd;
        file_t *fp;
        uf_entry_t *ufp;

        ufp = fip->fi_list;
        for (fd = 0; fd < fip->fi_nfiles; fd++, ufp++) {
                if ((fp = ufp->uf_file) != NULL) {
                        ufp->uf_file = NULL;
                        if (ufp->uf_portfd != NULL) {
                                portfd_t *pfd;
                                /* remove event port association */
                                pfd = ufp->uf_portfd;
                                ufp->uf_portfd = NULL;
                                port_close_fd(pfd);
                        }
                        ASSERT(ufp->uf_fpollinfo == NULL);
                        (void) closef(fp);
                }
        }

        kmem_free(fip->fi_list, fip->fi_nfiles * sizeof (uf_entry_t));
        fip->fi_list = NULL;
        fip->fi_nfiles = 0;
        while (fip->fi_rlist != NULL) {
                uf_rlist_t *urp = fip->fi_rlist;
                fip->fi_rlist = urp->ur_next;
                kmem_free(urp->ur_list, urp->ur_nfiles * sizeof (uf_entry_t));
                kmem_free(urp, sizeof (uf_rlist_t));
        }
}

/*
 * Internal form of close.  Decrement reference count on file
 * structure.  Decrement reference count on the vnode following
 * removal of the referencing file structure.
 */
int
closef(file_t *fp)
{
        vnode_t *vp;
        int error;
        int count;
        int flag;
        offset_t offset;

        /*
         * audit close of file (may be exit)
         */
        if (AU_AUDITING())
                audit_closef(fp);
        ASSERT(MUTEX_NOT_HELD(&P_FINFO(curproc)->fi_lock));

        mutex_enter(&fp->f_tlock);

        ASSERT(fp->f_count > 0);

        count = fp->f_count--;
        flag = fp->f_flag;
        offset = fp->f_offset;

        vp = fp->f_vnode;

        error = VOP_CLOSE(vp, flag, count, offset, fp->f_cred, NULL);

        if (count > 1) {
                mutex_exit(&fp->f_tlock);
                return (error);
        }
        ASSERT(fp->f_count == 0);
        mutex_exit(&fp->f_tlock);

        /*
         * If DTrace has getf() subroutines active, it will set dtrace_closef
         * to point to code that implements a barrier with respect to probe
         * context.  This must be called before the file_t is freed (and the
         * vnode that it refers to is released) -- but it must be after the
         * file_t has been removed from the uf_entry_t.  That is, there must
         * be no way for a racing getf() in probe context to yield the fp that
         * we're operating upon.
         */
        if (dtrace_closef != NULL)
                (*dtrace_closef)();

        VN_RELE(vp);
        /*
         * deallocate resources to audit_data
         */
        if (audit_active)
                audit_unfalloc(fp);
        crfree(fp->f_cred);
        kmem_cache_free(file_cache, fp);
        return (error);
}

/*
 * This is a combination of ufalloc() and setf().
 */
int
ufalloc_file(int start, file_t *fp)
{
        proc_t *p = curproc;
        uf_info_t *fip = P_FINFO(p);
        int filelimit;
        uf_entry_t *ufp;
        int nfiles;
        int fd;

        /*
         * Assertion is to convince the correctness of the following
         * assignment for filelimit after casting to int.
         */
        ASSERT(p->p_fno_ctl <= INT_MAX);
        filelimit = (int)p->p_fno_ctl;

        for (;;) {
                mutex_enter(&fip->fi_lock);
                fd = fd_find(fip, start);
                if (fd >= 0 && fd == fip->fi_badfd) {
                        start = fd + 1;
                        mutex_exit(&fip->fi_lock);
                        continue;
                }
                if ((uint_t)fd < filelimit)
                        break;
                if (fd >= filelimit) {
                        mutex_exit(&fip->fi_lock);
                        mutex_enter(&p->p_lock);
                        (void) rctl_action(rctlproc_legacy[RLIMIT_NOFILE],
                            p->p_rctls, p, RCA_SAFE);
                        mutex_exit(&p->p_lock);
                        return (-1);
                }
                /* fd_find() returned -1 */
                nfiles = fip->fi_nfiles;
                mutex_exit(&fip->fi_lock);
                flist_grow(MAX(start, nfiles));
        }

        UF_ENTER(ufp, fip, fd);
        fd_reserve(fip, fd, 1);
        ASSERT(ufp->uf_file == NULL);
        ufp->uf_file = fp;
        UF_EXIT(ufp);
        mutex_exit(&fip->fi_lock);
        return (fd);
}

/*
 * Allocate a user file descriptor greater than or equal to "start".
 */
int
ufalloc(int start)
{
        return (ufalloc_file(start, NULL));
}

/*
 * Check that a future allocation of count fds on proc p has a good
 * chance of succeeding.  If not, do rctl processing as if we'd failed
 * the allocation.
 *
 * Our caller must guarantee that p cannot disappear underneath us.
 */
int
ufcanalloc(proc_t *p, uint_t count)
{
        uf_info_t *fip = P_FINFO(p);
        int filelimit;
        int current;

        if (count == 0)
                return (1);

        ASSERT(p->p_fno_ctl <= INT_MAX);
        filelimit = (int)p->p_fno_ctl;

        mutex_enter(&fip->fi_lock);
        current = flist_nalloc(fip);            /* # of in-use descriptors */
        mutex_exit(&fip->fi_lock);

        /*
         * If count is a positive integer, the worst that can happen is
         * an overflow to a negative value, which is caught by the >= 0 check.
         */
        current += count;
        if (count <= INT_MAX && current >= 0 && current <= filelimit)
                return (1);

        mutex_enter(&p->p_lock);
        (void) rctl_action(rctlproc_legacy[RLIMIT_NOFILE],
            p->p_rctls, p, RCA_SAFE);
        mutex_exit(&p->p_lock);
        return (0);
}

/*
 * Allocate a user file descriptor and a file structure.
 * Initialize the descriptor to point at the file structure.
 * If fdp is NULL, the user file descriptor will not be allocated.
 */
int
falloc(vnode_t *vp, int flag, file_t **fpp, int *fdp)
{
        file_t *fp;
        int fd;

        if (fdp) {
                if ((fd = ufalloc(0)) == -1)
                        return (EMFILE);
        }
        fp = kmem_cache_alloc(file_cache, KM_SLEEP);
        /*
         * Note: falloc returns the fp locked
         */
        mutex_enter(&fp->f_tlock);
        fp->f_count = 1;
        fp->f_flag = (ushort_t)flag;
        fp->f_flag2 = (flag & (FSEARCH|FEXEC)) >> 16;
        fp->f_vnode = vp;
        fp->f_offset = 0;
        fp->f_audit_data = 0;
        crhold(fp->f_cred = CRED());
        /*
         * allocate resources to audit_data
         */
        if (audit_active)
                audit_falloc(fp);
        *fpp = fp;
        if (fdp)
                *fdp = fd;
        return (0);
}

/*ARGSUSED*/
static int
file_cache_constructor(void *buf, void *cdrarg, int kmflags)
{
        file_t *fp = buf;

        mutex_init(&fp->f_tlock, NULL, MUTEX_DEFAULT, NULL);
        return (0);
}

/*ARGSUSED*/
static void
file_cache_destructor(void *buf, void *cdrarg)
{
        file_t *fp = buf;

        mutex_destroy(&fp->f_tlock);
}

void
finit()
{
        file_cache = kmem_cache_create("file_cache", sizeof (file_t), 0,
            file_cache_constructor, file_cache_destructor, NULL, NULL, NULL, 0);
}

void
unfalloc(file_t *fp)
{
        ASSERT(MUTEX_HELD(&fp->f_tlock));
        if (--fp->f_count <= 0) {
                /*
                 * deallocate resources to audit_data
                 */
                if (audit_active)
                        audit_unfalloc(fp);
                crfree(fp->f_cred);
                mutex_exit(&fp->f_tlock);
                kmem_cache_free(file_cache, fp);
        } else
                mutex_exit(&fp->f_tlock);
}

/*
 * Given a file descriptor, set the user's
 * file pointer to the given parameter.
 */
void
setf(int fd, file_t *fp)
{
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;

        if (AU_AUDITING())
                audit_setf(fp, fd);

        if (fp == NULL) {
                mutex_enter(&fip->fi_lock);
                UF_ENTER(ufp, fip, fd);
                fd_reserve(fip, fd, -1);
                mutex_exit(&fip->fi_lock);
        } else {
                UF_ENTER(ufp, fip, fd);
                ASSERT(ufp->uf_busy);
        }
        ASSERT(ufp->uf_fpollinfo == NULL);
        ASSERT(ufp->uf_flag == 0);
        ufp->uf_file = fp;
        cv_broadcast(&ufp->uf_wanted_cv);
        UF_EXIT(ufp);
}

/*
 * Given a file descriptor, return the file table flags, plus,
 * if this is a socket in asynchronous mode, the FASYNC flag.
 * getf() may or may not have been called before calling f_getfl().
 */
int
f_getfl(int fd, int *flagp)
{
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;
        file_t *fp;
        int error;

        if ((uint_t)fd >= fip->fi_nfiles)
                error = EBADF;
        else {
                UF_ENTER(ufp, fip, fd);
                if ((fp = ufp->uf_file) == NULL)
                        error = EBADF;
                else {
                        vnode_t *vp = fp->f_vnode;
                        int flag = fp->f_flag | (fp->f_flag2 << 16);

                        /*
                         * BSD fcntl() FASYNC compatibility.
                         */
                        if (vp->v_type == VSOCK)
                                flag |= sock_getfasync(vp);
                        *flagp = flag;
                        error = 0;
                }
                UF_EXIT(ufp);
        }

        return (error);
}

/*
 * Given a file descriptor, return the user's file flags.
 * Force the FD_CLOEXEC flag for writable self-open /proc files.
 * getf() may or may not have been called before calling f_getfd_error().
 */
int
f_getfd_error(int fd, int *flagp)
{
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;
        file_t *fp;
        int flag;
        int error;

        if ((uint_t)fd >= fip->fi_nfiles)
                error = EBADF;
        else {
                UF_ENTER(ufp, fip, fd);
                if ((fp = ufp->uf_file) == NULL)
                        error = EBADF;
                else {
                        flag = ufp->uf_flag;
                        if ((fp->f_flag & FWRITE) && pr_isself(fp->f_vnode))
                                flag |= FD_CLOEXEC;
                        *flagp = flag;
                        error = 0;
                }
                UF_EXIT(ufp);
        }

        return (error);
}

/*
 * getf() must have been called before calling f_getfd().
 */
char
f_getfd(int fd)
{
        int flag = 0;
        (void) f_getfd_error(fd, &flag);
        return ((char)flag);
}

/*
 * Given a file descriptor and file flags, set the user's file flags.
 * At present, the only valid flag is FD_CLOEXEC.
 * getf() may or may not have been called before calling f_setfd_error().
 */
int
f_setfd_error(int fd, int flags)
{
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;
        int error;

        if ((uint_t)fd >= fip->fi_nfiles)
                error = EBADF;
        else {
                UF_ENTER(ufp, fip, fd);
                if (ufp->uf_file == NULL)
                        error = EBADF;
                else {
                        ufp->uf_flag = flags & FD_CLOEXEC;
                        error = 0;
                }
                UF_EXIT(ufp);
        }
        return (error);
}

void
f_setfd(int fd, char flags)
{
        (void) f_setfd_error(fd, flags);
}

#define BADFD_MIN       3
#define BADFD_MAX       255

/*
 * Attempt to allocate a file descriptor which is bad and which
 * is "poison" to the application.  It cannot be closed (except
 * on exec), allocated for a different use, etc.
 */
int
f_badfd(int start, int *fdp, int action)
{
        int fdr;
        int badfd;
        uf_info_t *fip = P_FINFO(curproc);

#ifdef _LP64
        /* No restrictions on 64 bit _file */
        if (get_udatamodel() != DATAMODEL_ILP32)
                return (EINVAL);
#endif

        if (start > BADFD_MAX || start < BADFD_MIN)
                return (EINVAL);

        if (action >= NSIG || action < 0)
                return (EINVAL);

        mutex_enter(&fip->fi_lock);
        badfd = fip->fi_badfd;
        mutex_exit(&fip->fi_lock);

        if (badfd != -1)
                return (EAGAIN);

        fdr = ufalloc(start);

        if (fdr > BADFD_MAX) {
                setf(fdr, NULL);
                return (EMFILE);
        }
        if (fdr < 0)
                return (EMFILE);

        mutex_enter(&fip->fi_lock);
        if (fip->fi_badfd != -1) {
                /* Lost race */
                mutex_exit(&fip->fi_lock);
                setf(fdr, NULL);
                return (EAGAIN);
        }
        fip->fi_action = action;
        fip->fi_badfd = fdr;
        mutex_exit(&fip->fi_lock);
        setf(fdr, NULL);

        *fdp = fdr;

        return (0);
}

/*
 * Allocate a file descriptor and assign it to the vnode "*vpp",
 * performing the usual open protocol upon it and returning the
 * file descriptor allocated.  It is the responsibility of the
 * caller to dispose of "*vpp" if any error occurs.
 */
int
fassign(vnode_t **vpp, int mode, int *fdp)
{
        file_t *fp;
        int error;
        int fd;

        if (error = falloc((vnode_t *)NULL, mode, &fp, &fd))
                return (error);
        if (error = VOP_OPEN(vpp, mode, fp->f_cred, NULL)) {
                setf(fd, NULL);
                unfalloc(fp);
                return (error);
        }
        fp->f_vnode = *vpp;
        mutex_exit(&fp->f_tlock);
        /*
         * Fill in the slot falloc reserved.
         */
        setf(fd, fp);
        *fdp = fd;
        return (0);
}

/*
 * When a process forks it must increment the f_count of all file pointers
 * since there is a new process pointing at them.  fcnt_add(fip, 1) does this.
 * Since we are called when there is only 1 active lwp we don't need to
 * hold fi_lock or any uf_lock.  If the fork fails, fork_fail() calls
 * fcnt_add(fip, -1) to restore the counts.
 */
void
fcnt_add(uf_info_t *fip, int incr)
{
        int i;
        uf_entry_t *ufp;
        file_t *fp;

        ufp = fip->fi_list;
        for (i = 0; i < fip->fi_nfiles; i++, ufp++) {
                if ((fp = ufp->uf_file) != NULL) {
                        mutex_enter(&fp->f_tlock);
                        ASSERT((incr == 1 && fp->f_count >= 1) ||
                            (incr == -1 && fp->f_count >= 2));
                        fp->f_count += incr;
                        mutex_exit(&fp->f_tlock);
                }
        }
}

/*
 * This is called from exec to close all fd's that have the FD_CLOEXEC flag
 * set and also to close all self-open for write /proc file descriptors.
 */
void
close_exec(uf_info_t *fip)
{
        int fd;
        file_t *fp;
        fpollinfo_t *fpip;
        uf_entry_t *ufp;
        portfd_t *pfd;

        ufp = fip->fi_list;
        for (fd = 0; fd < fip->fi_nfiles; fd++, ufp++) {
                if ((fp = ufp->uf_file) != NULL &&
                    ((ufp->uf_flag & FD_CLOEXEC) ||
                    ((fp->f_flag & FWRITE) && pr_isself(fp->f_vnode)))) {
                        fpip = ufp->uf_fpollinfo;
                        mutex_enter(&fip->fi_lock);
                        mutex_enter(&ufp->uf_lock);
                        fd_reserve(fip, fd, -1);
                        mutex_exit(&fip->fi_lock);
                        ufp->uf_file = NULL;
                        ufp->uf_fpollinfo = NULL;
                        ufp->uf_flag = 0;
                        /*
                         * We may need to cleanup some cached poll states
                         * in t_pollstate before the fd can be reused. It
                         * is important that we don't access a stale thread
                         * structure. We will do the cleanup in two
                         * phases to avoid deadlock and holding uf_lock for
                         * too long. In phase 1, hold the uf_lock and call
                         * pollblockexit() to set state in t_pollstate struct
                         * so that a thread does not exit on us. In phase 2,
                         * we drop the uf_lock and call pollcacheclean().
                         */
                        pfd = ufp->uf_portfd;
                        ufp->uf_portfd = NULL;
                        if (fpip != NULL)
                                pollblockexit(fpip);
                        mutex_exit(&ufp->uf_lock);
                        if (fpip != NULL)
                                pollcacheclean(fpip, fd);
                        if (pfd)
                                port_close_fd(pfd);
                        (void) closef(fp);
                }
        }

        /* Reset bad fd */
        fip->fi_badfd = -1;
        fip->fi_action = -1;
}

/*
 * Utility function called by most of the *at() system call interfaces.
 *
 * Generate a starting vnode pointer for an (fd, path) pair where 'fd'
 * is an open file descriptor for a directory to be used as the starting
 * point for the lookup of the relative pathname 'path' (or, if path is
 * NULL, generate a vnode pointer for the direct target of the operation).
 *
 * If we successfully return a non-NULL startvp, it has been the target
 * of VN_HOLD() and the caller must call VN_RELE() on it.
 */
int
fgetstartvp(int fd, char *path, vnode_t **startvpp)
{
        vnode_t         *startvp;
        file_t          *startfp;
        char            startchar;

        if (fd == AT_FDCWD && path == NULL)
                return (EFAULT);

        if (fd == AT_FDCWD) {
                /*
                 * Start from the current working directory.
                 */
                startvp = NULL;
        } else {
                if (path == NULL)
                        startchar = '\0';
                else if (copyin(path, &startchar, sizeof (char)))
                        return (EFAULT);

                if (startchar == '/') {
                        /*
                         * 'path' is an absolute pathname.
                         */
                        startvp = NULL;
                } else {
                        /*
                         * 'path' is a relative pathname or we will
                         * be applying the operation to 'fd' itself.
                         */
                        if ((startfp = getf(fd)) == NULL)
                                return (EBADF);
                        startvp = startfp->f_vnode;
                        VN_HOLD(startvp);
                        releasef(fd);
                }
        }
        *startvpp = startvp;
        return (0);
}

/*
 * Called from fchownat() and fchmodat() to set ownership and mode.
 * The contents of *vap must be set before calling here.
 */
int
fsetattrat(int fd, char *path, int flags, struct vattr *vap)
{
        vnode_t         *startvp;
        vnode_t         *vp;
        int             error;

        /*
         * Since we are never called to set the size of a file, we don't
         * need to check for non-blocking locks (via nbl_need_check(vp)).
         */
        ASSERT(!(vap->va_mask & AT_SIZE));

        if ((error = fgetstartvp(fd, path, &startvp)) != 0)
                return (error);
        if (AU_AUDITING() && startvp != NULL)
                audit_setfsat_path(1);

        /*
         * Do lookup for fchownat/fchmodat when path not NULL
         */
        if (path != NULL) {
                if (error = lookupnameat(path, UIO_USERSPACE,
                    (flags == AT_SYMLINK_NOFOLLOW) ?
                    NO_FOLLOW : FOLLOW,
                    NULLVPP, &vp, startvp)) {
                        if (startvp != NULL)
                                VN_RELE(startvp);
                        return (error);
                }
        } else {
                vp = startvp;
                ASSERT(vp);
                VN_HOLD(vp);
        }

        if (vn_is_readonly(vp)) {
                error = EROFS;
        } else {
                error = VOP_SETATTR(vp, vap, 0, CRED(), NULL);
        }

        if (startvp != NULL)
                VN_RELE(startvp);
        VN_RELE(vp);

        return (error);
}

/*
 * Return true if the given vnode is referenced by any
 * entry in the current process's file descriptor table.
 */
int
fisopen(vnode_t *vp)
{
        int fd;
        file_t *fp;
        vnode_t *ovp;
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;

        mutex_enter(&fip->fi_lock);
        for (fd = 0; fd < fip->fi_nfiles; fd++) {
                UF_ENTER(ufp, fip, fd);
                if ((fp = ufp->uf_file) != NULL &&
                    (ovp = fp->f_vnode) != NULL && VN_CMP(vp, ovp)) {
                        UF_EXIT(ufp);
                        mutex_exit(&fip->fi_lock);
                        return (1);
                }
                UF_EXIT(ufp);
        }
        mutex_exit(&fip->fi_lock);
        return (0);
}

/*
 * Return zero if at least one file currently open (by curproc) shouldn't be
 * allowed to change zones.
 */
int
files_can_change_zones(void)
{
        int fd;
        file_t *fp;
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;

        mutex_enter(&fip->fi_lock);
        for (fd = 0; fd < fip->fi_nfiles; fd++) {
                UF_ENTER(ufp, fip, fd);
                if ((fp = ufp->uf_file) != NULL &&
                    !vn_can_change_zones(fp->f_vnode)) {
                        UF_EXIT(ufp);
                        mutex_exit(&fip->fi_lock);
                        return (0);
                }
                UF_EXIT(ufp);
        }
        mutex_exit(&fip->fi_lock);
        return (1);
}

#ifdef DEBUG

/*
 * The following functions are only used in ASSERT()s elsewhere.
 * They do not modify the state of the system.
 */

/*
 * Return true (1) if the current thread is in the fpollinfo
 * list for this file descriptor, else false (0).
 */
static int
curthread_in_plist(uf_entry_t *ufp)
{
        fpollinfo_t *fpip;

        ASSERT(MUTEX_HELD(&ufp->uf_lock));
        for (fpip = ufp->uf_fpollinfo; fpip; fpip = fpip->fp_next)
                if (fpip->fp_thread == curthread)
                        return (1);
        return (0);
}

/*
 * Sanity check to make sure that after lwp_exit(),
 * curthread does not appear on any fd's fpollinfo list.
 */
void
checkfpollinfo(void)
{
        int fd;
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;

        mutex_enter(&fip->fi_lock);
        for (fd = 0; fd < fip->fi_nfiles; fd++) {
                UF_ENTER(ufp, fip, fd);
                ASSERT(!curthread_in_plist(ufp));
                UF_EXIT(ufp);
        }
        mutex_exit(&fip->fi_lock);
}

/*
 * Return true (1) if the current thread is in the fpollinfo
 * list for this file descriptor, else false (0).
 * This is the same as curthread_in_plist(),
 * but is called w/o holding uf_lock.
 */
int
infpollinfo(int fd)
{
        uf_info_t *fip = P_FINFO(curproc);
        uf_entry_t *ufp;
        int rc;

        UF_ENTER(ufp, fip, fd);
        rc = curthread_in_plist(ufp);
        UF_EXIT(ufp);
        return (rc);
}

#endif  /* DEBUG */

/*
 * Add the curthread to fpollinfo list, meaning this fd is currently in the
 * thread's poll cache. Each lwp polling this file descriptor should call
 * this routine once.
 */
void
addfpollinfo(int fd)
{
        struct uf_entry *ufp;
        fpollinfo_t *fpip;
        uf_info_t *fip = P_FINFO(curproc);

        fpip = kmem_zalloc(sizeof (fpollinfo_t), KM_SLEEP);
        fpip->fp_thread = curthread;
        UF_ENTER(ufp, fip, fd);
        /*
         * Assert we are not already on the list, that is, that
         * this lwp did not call addfpollinfo twice for the same fd.
         */
        ASSERT(!curthread_in_plist(ufp));
        /*
         * addfpollinfo is always done inside the getf/releasef pair.
         */
        ASSERT(ufp->uf_refcnt >= 1);
        fpip->fp_next = ufp->uf_fpollinfo;
        ufp->uf_fpollinfo = fpip;
        UF_EXIT(ufp);
}

/*
 * Delete curthread from fpollinfo list if it is there.
 */
void
delfpollinfo(int fd)
{
        struct uf_entry *ufp;
        struct fpollinfo *fpip;
        struct fpollinfo **fpipp;
        uf_info_t *fip = P_FINFO(curproc);

        UF_ENTER(ufp, fip, fd);
        for (fpipp = &ufp->uf_fpollinfo;
            (fpip = *fpipp) != NULL;
            fpipp = &fpip->fp_next) {
                if (fpip->fp_thread == curthread) {
                        *fpipp = fpip->fp_next;
                        kmem_free(fpip, sizeof (fpollinfo_t));
                        break;
                }
        }
        /*
         * Assert that we are not still on the list, that is, that
         * this lwp did not call addfpollinfo twice for the same fd.
         */
        ASSERT(!curthread_in_plist(ufp));
        UF_EXIT(ufp);
}

/*
 * fd is associated with a port. pfd is a pointer to the fd entry in the
 * cache of the port.
 */

void
addfd_port(int fd, portfd_t *pfd)
{
        struct uf_entry *ufp;
        uf_info_t *fip = P_FINFO(curproc);

        UF_ENTER(ufp, fip, fd);
        /*
         * addfd_port is always done inside the getf/releasef pair.
         */
        ASSERT(ufp->uf_refcnt >= 1);
        if (ufp->uf_portfd == NULL) {
                /* first entry */
                ufp->uf_portfd = pfd;
                pfd->pfd_next = NULL;
        } else {
                pfd->pfd_next = ufp->uf_portfd;
                ufp->uf_portfd = pfd;
                pfd->pfd_next->pfd_prev = pfd;
        }
        UF_EXIT(ufp);
}

void
delfd_port(int fd, portfd_t *pfd)
{
        struct uf_entry *ufp;
        uf_info_t *fip = P_FINFO(curproc);

        UF_ENTER(ufp, fip, fd);
        /*
         * delfd_port is always done inside the getf/releasef pair.
         */
        ASSERT(ufp->uf_refcnt >= 1);
        if (ufp->uf_portfd == pfd) {
                /* remove first entry */
                ufp->uf_portfd = pfd->pfd_next;
        } else {
                pfd->pfd_prev->pfd_next = pfd->pfd_next;
                if (pfd->pfd_next != NULL)
                        pfd->pfd_next->pfd_prev = pfd->pfd_prev;
        }
        UF_EXIT(ufp);
}

static void
port_close_fd(portfd_t *pfd)
{
        portfd_t        *pfdn;

        /*
         * At this point, no other thread should access
         * the portfd_t list for this fd. The uf_file, uf_portfd
         * pointers in the uf_entry_t struct for this fd would
         * be set to NULL.
         */
        for (; pfd != NULL; pfd = pfdn) {
                pfdn = pfd->pfd_next;
                port_close_pfd(pfd);
        }
}